Hello guys,
Today suddenly the phone was turn off without any warring.
The next step I did is to turn it on, the phone is boot and working fine, and then turn off without any warring.
In the third time the phone going to the logo screen and turn off and in the fourth time again going to logo screen and turn off and, and etc.
After all this phenomenons I deiced to flash to backup I got, insert to recovery mode and I do "restore" action - the phone says "missing m5 files". Then I find your guide to flash a stock rom with Odin and it to be ended successfully. Now the phone turn on into the setting page of Samsung's stock and the screen stuck (any touch on the screen doesn't do anything). I turn off the phone and try to turn it on and again the phone is going to Samsung logo screen and turn off.
It is important to note that the phone insert to "download" and "recovery" mode.
I think that the phone infected with virus.
guys need yours help! :good::good:
Best regards,
Moshe
Try again with odin but with a diferent stock rom. Make sure you have stock according to your phone version. I9100, i9100g etc.
Hope this soslves your problem
Moshe125 said:
Hello guys,
Today suddenly the phone was turn off without any warring.
The next step I did is to turn it on, the phone is boot and working fine, and then turn off without any warring.
In the third time the phone going to the logo screen and turn off and in the fourth time again going to logo screen and turn off and, and etc.
After all this phenomenons I deiced to flash to backup I got, insert to recovery mode and I do "restore" action - the phone says "missing m5 files". Then I find your guide to flash a stock rom with Odin and it to be ended successfully. Now the phone turn on into the setting page of Samsung's stock and the screen stuck (any touch on the screen doesn't do anything). I turn off the phone and try to turn it on and again the phone is going to Samsung logo screen and turn off.
It is important to note that the phone insert to "download" and "recovery" mode.
I think that the phone infected with virus.
guys need yours help! :good::good:
Best regards,
Moshe
Click to expand...
Click to collapse
Did you factory reset and wipe partition and dalvik cache?
gsstudios said:
Did you factory reset and wipe partition and dalvik cache?
Click to expand...
Click to collapse
+1
try to do it after and before flashing
and please verify you phone model if it i9100 or i9100g
1. I try to flash with anther stock rom - not helped.
2. I did all the wipes and factory reset.
3. My model is i9100.
ty again guys
EDIT: The problem was the battery...
Related
I have got a Samsung Galaxy Note GT N7000. My friend has actually made an update (claims to), and now my phone won't boot! I get the first Screen as
"Samsung Galaxy Note GT N7000" after which the Samsung logo splash should follow, but simply doesn't. All I get is a black screen. With the Volume Down + Power + home I get the "Downloading Do Not Turn Target off" and it just stays that way, I don't really think it is actually downloading anything. With Volume Up + Power + Home I get "Manual Mode" of some recovery mode. Wherein I have
Reboot
Update from External SD
Update from Cache
Wipe External SD
Wipe Cache
Reboot just simply does the same, I get a black screen after Samsung Galaxy screen. What could be wrong with my phone? I have no idea, help please.
Edit:
I have Odin downloaded, and in the Download Mode, I get that COM:ID port added, but I have no clue where to proceed from there on.
Imman07 said:
I have got a Samsung Galaxy Note GT N7000. My friend has actually made an update (claims to), and now my phone won't boot! I get the first Screen as
"Samsung Galaxy Note GT N7000" after which the Samsung logo splash should follow, but simply doesn't. All I get is a black screen. With the Volume Down + Power + home I get the "Downloading Do Not Turn Target off" and it just stays that way, I don't really think it is actually downloading anything. With Volume Up + Power + Home I get "Manual Mode" of some recovery mode. Wherein I have
Reboot
Update from External SD
Update from Cache
Wipe External SD
Wipe Cache
Reboot just simply does the same, I get a black screen after Samsung Galaxy screen. What could be wrong with my phone? I have no idea, help please.
Edit:
I have Odin downloaded, and in the Download Mode, I get that COM:ID port added, but I have no clue where to proceed from there on.
Click to expand...
Click to collapse
hey man, i fall into this problem and can't solve it . please if you or anyone can help me because i can't solve it and tried everything. help me if you can!
Your phone's soft bricked. Signup and download N7000 stock ROM (your region) from Sammobile.. Reflash stock ROM using Odin.
fall into same problem
i have fall into the same problem can u help me because it does not boot into custom recover
hermitabby said:
i have fall into the same problem and when i use Odin mode to install custom ROM it does not start, but it show betry charging then try to boot and flash black screen and back to charging mode if you plug the phone to PC or charge it does the same
Click to expand...
Click to collapse
Odin to flash a custom ROM? Well, that's new. Since when they stopped using custom recovery?
i will be much appreciate if you give me good way to fix my device because now it does not even start in custom recover
Wipe data [factory reset]
Imman07 said:
I have got a Samsung Galaxy Note GT N7000. My friend has actually made an update (claims to), and now my phone won't boot! I get the first Screen as
"Samsung Galaxy Note GT N7000" after which the Samsung logo splash should follow, but simply doesn't. All I get is a black screen. With the Volume Down + Power + home I get the "Downloading Do Not Turn Target off" and it just stays that way, I don't really think it is actually downloading anything. With Volume Up + Power + Home I get "Manual Mode" of some recovery mode. Wherein I have
Reboot
Update from External SD
Update from Cache
Wipe External SD
Wipe Cache
Reboot just simply does the same, I get a black screen after Samsung Galaxy screen. What could be wrong with my phone? I have no idea, help please.
Edit:
I have Odin downloaded, and in the Download Mode, I get that COM:ID port added, but I have no clue where to proceed from there on.
Click to expand...
Click to collapse
Even i faced the same issue on factory firmware. And was able to get my phone started after wiping the cache and data in recovery mode.
i have the same issue with you. It's solved by flash new rom.
pratik069 said:
Even i faced the same issue on factory firmware. And was able to get my phone started after wiping the cache and data in recovery mode.
Click to expand...
Click to collapse
Thnks. Getting a little bit nervious (ive been having a little too much fun putting different roms...and $%$#% was ment to happen...). So that did the trick.
ODIN <--- Stock Firmware <--- Stuck on Logo <-- Recovery <--- Factory Reset and Cache...
Presto...working again!
Thnk you
Hello,
I have a S3 which is stuck in a bootloop at the samsung logo.
when i turn it on it shows the logo for some seconds then the screen goes black and the logo re-appears.
i can not boot into recovery mode, but download mode is working without a problem every time.
i tried flashing stock firmwares with odin and also tried kies emergency firmware recovery. the flashing always went without any problem, but it had effect. whatever i try, i am never able to boot into recovery and still stuck in the bootloop.
in some tries after flashing the screen just shows the samsung logo forever, but after rebooting it once it then is stuck in a bootloop again (shows the logo - screen goes black - shows the logo...)
i also tried flashing TWRP and CWM via odin, but again i can never boot into recovery mode.
what should i try next?
thx alot for any helpful comment
Varjo said:
Hello,
I have a S3 which is stuck in a bootloop at the samsung logo.
when i turn it on it shows the logo for some seconds then the screen goes black and the logo re-appears.
i can not boot into recovery mode, but download mode is working without a problem every time.
i tried flashing stock firmwares with odin and also tried kies emergency firmware recovery. the flashing always went without any problem, but it had effect. whatever i try, i am never able to boot into recovery and still stuck in the bootloop.
in some tries after flashing the screen just shows the samsung logo forever, but after rebooting it once it then is stuck in a bootloop again (shows the logo - screen goes black - shows the logo...)
i also tried flashing TWRP and CWM via odin, but again i can never boot into recovery mode.
what should i try next?
thx alot for any helpful comment
Click to expand...
Click to collapse
You can Try this:
1.) Pull out battery
2.) Put it in again
3.) Press Vol up + home + power
4.) When the Samsung Logo appears let it off
I think you press the Buttons too long.
I had the same problem!
S1ay3r666 said:
I think you press the Buttons too long.
Click to expand...
Click to collapse
i really tried everything, it's not working. btw with i am stuck at the very first image, where it says "samsung Galaxy sII GT-I9300".
i dont think it's just the way i press the buttons because i can reach it on my s1 and s2 without a problem, it's just not working on this device.
could some setting like "nand erase all" in odin help? in other threads there is sometimes mentioned that the internal file system might be screwed up and in those cases a simple odin reflash does not help anymore...
Nand erase will usually hard brick it. Try the rescue firmware from general forum, sticky thread. Follow the guide exactly as it includes a pit file.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
Try the rescue firmware from general forum, sticky thread. Follow the guide exactly as it includes a pit file.
Click to expand...
Click to collapse
thx, but i already did that (multiple times) and flashing via odin always succeeds. then the phone reboots and is stuck at the first samsung galaxy s.. screen. twice i managed somehow to get into recovery (after flashing cwm6) but it then randomly rebooted.
and i dont think that the power button is stuck because when i am in download mode it is perfectly fine it never reboots itself unexpectedly.
Had a similar issue on my tab2 p3100. It all happened when I tried flashing a custom recovery from rom manager.
A bad flash of anything related to recovery or bootloader could be a probable cause.
I remember a knowledge share on one of the threads describing this issue and as mentioned on it all I had to do is this:
1) switch off the device and plug in the charger. This would light up the display showing you the charging status. The status has to show if at least your bootloader part of the phone is fine.
2) plug out the charger and immediately press the three buttons (home + vol up + power) get into recovery mode. This step has to work and help you get to recovery mode.
***Note : the interval within which this step has to be performed is too short since the display would turn off immediately as soon as you plug out the charger. A bit tricky too so you have to be fast. If this misses getting you into recovery, pull out the battery and put it back again. Repeat step1 and 2 again.
3) upon successfully getting into recovery, perform wipe data, cache and select reboot phone from option available on recovery again.
Allow the device to boot. This could take a while since you have performed a data wipe and may prompt for first time set up.
I was able to restore functionality on my tab after these steps and like ppl learn from their mistakes, I then learnt that recoveries and bootloaders are things that needs to be done with a pc only.
Worth a try if you have tried other alternatives and found no go. may help. Who knows..
all the best.
thats also not working. i tried to get into recovery since two days now...
i also tried the steps from this thread: http://forum.xda-developers.com/galaxy-s3/help/solved-pit-bricked-dead-problem-gt-t2535367
but again, after i flash the cf-root (successfully) the phone does neither boot into recovery by itself nor can i do it by hand...
its crazy... in download mode i can see the model number (GT-I9300) and i thought as long as the model number is there and i can enter download mode there should be a way to recover the device.
but i cannot think of anything to try that i have not done yet
If the rescue firmware didn't help then it looks like the emmc chip is damaged.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
If the rescue firmware didn't help then it looks like the emmc chip is damaged.
Click to expand...
Click to collapse
is there a way to make certain of this? how can i tell if it is really a hardware damage and not just a software brick?
i just dont want to let the phone go, it looks still so shiny
is there anything else that could cause the phone not booting into recovery mode after flashing custom recoveries?
Varjo said:
is there a way to make certain of this? how can i tell if it is really a hardware damage and not just a software brick?
i just dont want to let the phone go, it looks still so shiny
is there anything else that could cause the phone not booting into recovery mode after flashing custom recoveries?
Click to expand...
Click to collapse
http://forum.xda-developers.com/gala...-help-t2737707
Same here, still didn't found how to fix it.. I guess our motherboard just died..
Howewer I have a solution that "almost" worked for me.
Get a stock firmware in odin and turn on Nand erase and T-flash
When it's done phone reboots and you'll see just "Downloading..." mode when you turn it on.
Then got to Kies and Select firmware recovery...
Enter s/n and model name and wait for the flash to complete.
With it , I got past boot logo and actually booted into android but the phone crashed because I guess I have a memory issue..
Well , gl. If you don't find anything else helpful , try going with this method..
Hi,
So i tried to update my galaxy s6 edge t mobile to the latest firmware and once it did, it got stuck in the samsung screen and wont boot. The phone was rooted before, and now it just stays stuck. I have restarted the phone and now I have tried flashing the phone using Odin. It keeps saying failed and it shows the following:: " SW REV. CHECK FAIL. DEVICE: 2, BINARY: 1". I have tried downloading the firmware but it just keeps failing. When it updated, it should have updated to 5.1.1 since thats the latest which means i cant just put any other one right?
I dont know what to do to be honest, if anyone can help me i would really appreciate it.
anyone?
Have you tried using Smart Switch to restore Stock firmware?
There are a few solutions mate
1st One:
1) Put your phone into download mode using "Volume Down-Home-Power" combo until your screen comes into download mode and still hold it untill the screen goes off.
2)Quickly switch to recovery mode using "Volume Up-Home-Power" in the black screen and get into recovery
a)if it loads something and says erased... please start from the 1st step again
3)Wipe cache/ factory reset do these things in the recovery mode then reboot.
you should be good to go. If not theres another solution.
--------------------------------------------------
2nd One:
1)Put your phone into download mode.
2)Connect ur phone to the computer via usb and open smart switch
3)Press view more button on the right top.
4)Choose the 1st option as "emergency recovery and restore"
5)Put your model and serial number (its on the backside of the phone)
6)then follow the instructions of the smartswitch
thats it
vanderax said:
There are a few solutions mate
1st One:
1) Put your phone into download mode using "Volume Down-Home-Power" combo until your screen comes into download mode and still hold it untill the screen goes off.
2)Quickly switch to recovery mode using "Volume Up-Home-Power" in the black screen and get into recovery
a)if it loads something and says erased... please start from the 1st step again
3)Wipe cache/ factory reset do these things in the recovery mode then reboot.
you should be good to go. If not theres another solution.
--------------------------------------------------
2nd One:
1)Put your phone into download mode.
2)Connect ur phone to the computer via usb and open smart switch
3)Press view more button on the right top.
4)Choose the 1st option as "emergency recovery and restore"
5)Put your model and serial number (its on the backside of the phone)
6)then follow the instructions of the smartswitch
thats it
Click to expand...
Click to collapse
gonna try that one out
vanderax said:
There are a few solutions mate
1st One:
1) Put your phone into download mode using "Volume Down-Home-Power" combo until your screen comes into download mode and still hold it untill the screen goes off.
2)Quickly switch to recovery mode using "Volume Up-Home-Power" in the black screen and get into recovery
a)if it loads something and says erased... please start from the 1st step again
3)Wipe cache/ factory reset do these things in the recovery mode then reboot.
you should be good to go. If not theres another solution.
--------------------------------------------------
2nd One:
1)Put your phone into download mode.
2)Connect ur phone to the computer via usb and open smart switch
3)Press view more button on the right top.
4)Choose the 1st option as "emergency recovery and restore"
5)Put your model and serial number (its on the backside of the phone)
6)then follow the instructions of the smartswitch
thats it
Click to expand...
Click to collapse
Ok so my phone stays stuck in the samsung screen and smart switch stays stuck saying connecting to your device. i really dont wanna try the factory reset thing because i havent backed up the files on my phone
Ok so i got to flash it with 5.1.1 using odin but once its done it keeps staying stuck in the samsung logo screen....again.
Just did factory reset and still gets stuck at the damn samsung logo..
I am willing to pay if someone can help me solve this issue
I also noticed that once the downloading portion of the phone is done, it says installing with the android robot picture, then halfway it says erasing and then it restarts and gets stuck at the samsung logo
=(
you need to do wipe cache and, wipe data and factory reset. That erasing part is normal. Your phone is not bricked. That android robot portion just verifies the stock recovery and partitions. No problem with it. just wipe cache dalvik and everything what you can find (there are 2 options already) on the recovery.
vanderax said:
you need to do wipe cache and, wipe data and factory reset. That erasing part is normal. Your phone is not bricked. That android robot portion just verifies the stock recovery and partitions. No problem with it. just wipe cache dalvik and everything what you can find (there are 2 options already) on the recovery.
Click to expand...
Click to collapse
did the factory reset and wiped cache, still nothing. This is totally stressing me out. Any other ideas?
Yesterday i SPT boxed my s6 edge and had the exact error. You may be lost with your eMMC files.. You should repair emmc with jtag...
vanderax said:
Yesterday i SPT boxed my s6 edge and had the exact error. You may be lost with your eMMC files.. You should repair emmc with jtag...
Click to expand...
Click to collapse
how do i do that?
also when i put my phone into recovery mode i get at the bottom of the screen, "dm-verity verification failed.... Need to check DRK first.."
=(
anyone got any other ideas?
Ok, so one night I was using my phone normally (Browsing. Watching YouTube, Playing Games) like everyone else does. Then all of a sudden it shuts off, but immediately turns on again without me pressing a button. (So basically it suddenly auto restarts on its own) This occured maybe 2-4 times (all in one night) until one time, it shuts off but doesn't turn on again (basically an automatic shutdown), so I tried turning it on again (Power button), then I got shocked because all of a sudden it enters a boot loop (Screen displaying this sequence : Samsung Galaxy S4 screen, my carrier logo screen, The encrypted screen (where you have to enter your encryption password) then again the Samsung logo but this time with the colors splashing from the background, then it shuts off again.) Sometimes after the boot loop sequence, it vibrates but never turns on again, sometimes it just turns off after the sequence. And as I try and try to get away from the boot loop, the sequence became shorter. So I'm guessing it's a battery problem, BUT my battery isn't bloated or deformed. I tried clearing the cache first, again the sequence got shorter (never going up to the carrier logo screen), then I tried formatting the data, still to no avail. Now, when I turn it on, It shows the Samsung logo screen for 2 seconds and shuts down.
I tried flashing it with ODIN thru Download mode BUT (HERE'S where another problem occured) :
My phone never get pass on the system.img.ext4 dialogue and my screen just goes blank. But ODIN still recognizes my phone. And when I remove the USB cable, ODIN says FAIL.
I'm sure the cable is working. I downloaded the firmware for my carrier (Tre 3).
What could be the real problem here?
Here is the description of my device :
Samsung Galaxy GT-I9505
Bought from Italy, Tre 3 carrier
Can I download a different region/carrier for my I9505 phone?
Advanced thanks for anyone who comments and I'm very sorry for my English. Thanks!
I would install TWRP recovery, boot to it, and use it to format data, which will remove the encryption. Then I would either push a rom to the phone via recovery or try to reinstall the stock firmware with Odin. Make sure that you run Odin as admin as well. The firmware must be the same version or newer. If you still have the stock recovery and can boot to it, then I think the build number of the currently installed firmware will be visible there. You should be able to use that to Google the correct version you need.
Hey it's me. Just posting a quick reply.
Thanks for replying to my post. Yesterday I successfully flash a rom to my GT-I9505 (Version 5.0.1 Italy HUI 3G). However it still didn't boot up. At first try it booted up to the first setup screen then just randomly shuts down. Then as I try to boot it up again, It just shuts down after the first Samsung logo (with the GT-I9505 logo), I can't boot into recovery cause it shuts down. I'm sure it's not a battery issue cause when I boot into download mode, it can stay in that screen for like 10 minutes. What could be the issue? I'm planning to disassemble my S4 sooner to see if something's wrong inside. Thanks again for the reply
Was trying a factory reset with the idea that I'd give my Tab s3 to my wife upon receiving my S4.
The s3 was rooted but had the stock ROM.
I booted into recovery (TWRP) and did a wipe to factory reset. I had used TWRP a lot and didn't take my time. Just as I was moving the slider i read something like "sure you want to do this you have no OS installed." Too late.
Now it is stuck on the splash screen. I can't even turn it off.
Thoughts?
Thanks
4Nails said:
Was trying a factory reset with the idea that I'd give my Tab s3 to my wife upon receiving my S4.
The s3 was rooted but had the stock ROM.
I booted into recovery (TWRP) and did a wipe to factory reset. I had used TWRP a lot and didn't take my time. Just as I was moving the slider i read something like "sure you want to do this you have no OS installed." Too late.
Now it is stuck on the splash screen. I can't even turn it off.
Thoughts?
Thanks
Click to expand...
Click to collapse
You can either flash stock firmware from download mode (vol down+home+power). You can force reboot with this combination even if it's stuck at samsung logo (after screen gets dark, keep pressing them to get to download mode). Then you can flash with Odin a stock samsung firmware.
The other option is to use this rom https://forum.xda-developers.com/galaxy-tab-s3/development/rom-sm-t820-tweaked-t3659433.
Copy it to the microsd, boot to recovery (in this case you have to use the same 3 button combination, but as soon as the screen goes off, you leave the vol down and press vol up along home and power buttons.
That would take you to TWRP and then you could flash that rom.
The first option is the natural one but both should work.
Also, for the second option you need the actual bootloader to match the custom rom.
So if you're in Nougat, flash the Nougat rom. The same for Oreo.
Thanks. Worked perfectly.