this is alternative way to root the Huawei Mediapad 7 lite
credits vampirefo for his id command root check
my model was/is S7-931w which has wifi
1) use google playstore to install a terminal apk
2) download an apk to sdcard called Root Master (english Version).apk
http://www.nextwap.net/mobile/vE4C-rxxce/root_master__english_version_.html
3) allow your device to install unknown sources
4) install apk and open it
5) you will see 3 options, system info....root....and manager......choose the middle one
it will take some time with some animation
the first time it ran.....I checked inside the terminal to see if id command worked correctly.....it did not
6) reboot the phone and try again
If successful, in a terminal you are looking for the su command to change the prompt from $ to #
AND then run the id command and you must see only 2 responses...... user id and group id
---if you get a third response you have to redo it and reboot it
correct image is attached
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Related
Hi guys
I created a simple windows batch script for some normal adb commands
Like adb push/pull/install.
It just requires Android SDK installed on PC
Will add some more options as , when and if required
Though Initially I made only considering my phone ,I suppose it will work on all androids except the option of backing up frameworks.Didnt test on any other phone.
For Full help/tutorial about script
http://galaxy551.wordpress.com/gearloose/
Place gearloose.bat in any folder .
Before transferring execute option 2 which just makes required folders
Cheers
EDIT 1:
Gearloose now in Linux bash flavor too
Download gearloosetux.zip
Now with a make-do GUI for windows
Now gearloose in make do GUI
I used a free Installer project from The Wizard's Apprentice 1.5 from source forge
Thanks to Dion Nicolaas for creating this software
This is beta level and doesnt provide the same functions of Gearloose
Framework support is not in gearloose
Nor is batch app install and single data/system apps backup for now
Antivirus software raise flags while executing GearlooseGUI.bat .
But you guys can check the script and I assure it just a false positive.
screenie
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
trying to remove malware from my android phone ....
monkey test and ties services target to remove from device
phone rooted ,installed busy box
but in terminal it gives me fallowing error
want to remove .b & .ext.base from system-xbin
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Giving fallowing error
najrazlug said:
trying to remove malware from my android phone ....
monkey test and ties services target to remove from device
phone rooted ,installed busy box
but in terminal it gives me fallowing error
want to remove .b & .ext.base from system-xbin
Giving fallowing error
Click to expand...
Click to collapse
cd system/xbin
lsattr
and see the permission of .b .ext.base and .sys.apk then try chattr -your device permissions.
Your device permissions could be different thats why.
Apparently root and a permissive kernel are not required to run Xposed framework. It's only needed to install the framework, and you know how I keep saying how nice it is that our engroot kernel still boots a rooted shell... so anyways here it is
Installer
Uninstaller
Step 1: unzip the file then fire up Odin and in the AP slot choose the included eng_root.tar
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 2: your phone will be stuck on the logo, but open a command prompt and navigate to the bin directory you unzipped.
Type:
Code:
adb devices
Make sure adb sees your device before proceeding, it'll prolly take a minute or two before it does
Step 3: double click the Xposed.bat file you unzipped and let it do it's thing
First boot will take a few minutes.
Without root you may run into issues with some modules, nothing I can do about that but report them here so everyone knows.
Haven't tried it yet, but is there a way to uninstall?
Forgot to post that xD
https://mega.nz/#!CpBD2ToQ!eFQQvKvBQoYlbkl8qUKmXAIDoYqb_BxM4qZJ3-tCR30
This works perfectly! Thanks so much.
For some reason, few cases present the generic and ugly message of bootloader unlocked, and not the original of Xiaomi and here I have the solution.
If you have a uggly bootloader message, like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And you want the common image with a padlock, similar to this (but not the same):
You only need follow the next simple instructions, you have 2 ways to do.
First way - ADB Recommended
1. Install or download adb from here.
2. Conect your phone on fastboot mode.
3. Download and extract the attachment file on the same folder than adb.
4. In the same folder of adb, open a terminal (cmd, powershell) and type: "fastboot flash logo logo.img" (without quotation marks obviously).
Second way - TWRP CN
1. You need the TWRP CN (not multilanguage).
2. Download the attachment file, unzip and put on your internal memory.
3. Reboot on TWRP.
4 Choose "IMG" on the install section.
5. Select the logo.img and fhash.
I hope it will be you useful.
I ask this question here because it miserably fails at me using WSA ( version 2209.40000.28.0 ) . Running LOGCAT ( the main, system, and crash buffer set is used by default ) shows me that HOUDINI isn't get loaded at all though this ARM-to-INTEL translator is present in WSA.
My researches resulted in fact that In WSA the ARM-To-INTEL-Translator related files are present as shown next
/system/lib64/libhoudini.so
/system/lib/libhoudini.so
/vendor/lib/libhoudini.so
/vendor/lib64/libhoudini.so
/proc/sys/fs/binfmt_misc
/vendor/etc/binfmt_misc/arm64_dyn
/vendor/etc/binfmt_misc/arm64_exe
/vendor/etc/binfmt_misc/arm_dyn
/vendor/etc/binfmt_misc/arm_exe
but they obviously aren't used by default though are loaded via /etc/init.windows_x86_64.rc
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Also neither file /system/build.prop nor file /vendor/build.prop doesn't contain the related entries
Code:
ro.vendor.enable.native.bridge.exec=1
ro.dalvik.vm.isa.arm=x86
ro.vendor.enable.native.bridge.exec64=1
ro.dalvik.vm.isa.arm64=x86_64
ro.dalvik.vm.native.bridge=libhoudini.so
as shown here.
They are empty files. Have tested it with
Code:
adb shell 'echo "$(cat /system/build.prop)"'
adb shell 'echo "$(cat /vendor/build.prop)"'
Would be great it can be answered with YES and is shown to me a solution.
Same experience: Not any arm app get's installed and running.
Error gone since I upgraded to WSA version 2211.40000.7.0 for Windows 11 what features Android 13