Hello, i am new to Flashing ROM and encountered the problem while doing so on my device. My device is TELETALK X120Q(MT6589).. My board is gionee89_dwe_jb2. My OS was JB 4.2.1.
I downloaded a rom and tried to flash it on my device. I got the rom watching on one of the video on youtube.
I could not provide the link to youtube as it was restricted to me. Anyway the ROM, i wanted to install was said to be made for MT6589 devices and was based on Pure Xperia Z2 .
After completing the installion it didn't boot. i followed all the instruction, yet i encountered the problem. My device keeps on booting. bootloop. and on being so, camera's led glows.?
What has happened to my device? and how to make it work again?
And if you know any rom for this device.. please suggest me..
With?
First, we have to know what you flashed with. Like for Samsung, they use Odin. If you used a program or an application on your device to flash the new rom, try finding the flashing program. If you really cannot find it or it doesn't work, take it to the service but they might not take it in because the phone itself might be rooted (in the rom, there may be a root binary). If that doesn't work then you are completely hopeless or I just ran out of ideas. NO MATTER WHAT, IF YOUR PHONE IS NOT A SAMSUNG, DO NOT USE ODIN.
Good Luck!:fingers-crossed:
Related
I already posted my problems on this wall and I tried every solutions that people suggested me but it still not working....... bad.....
So I wanna say exactly what is my problems.
First of all, I rooted my phone when the version was 2.1 eclair and I did not use any custom rom I just used lagfix app
Secondary, I watched news that I was able to upgrade my phone to 2.2 froyo by official update. so I tried to update my version by kies mini without eliminating rooting system. the updating was working and my phone rebooted automatically but after I saw the hallmark as samsung galaxy s on the screen, my phone's screen was dark and I cannot see anything. Just sometimes it vibrated.
thirdly, I tried to recover by odin and official rom but it did not work.
at that time, odin stopped when it installed modem.bin (I used odin v1.0 first and I changed v1.7)
Finally, I posted my problems on this board and I got some suggestions from other great guys. so I tried 3 roms( T959UVJFD.tar, T959UVJI6.tar and another one) and I tried whole version odin to solve the problems. However, it did not work for me...........
WHatever I used different roms, odin always stopped when it installs modem.bin.... I think that is the most serious problem....
Please if you guys know how to solve this problems.... plz say me..... I will really appreciate guys..... Thanks
If I follow you guys instructions and my phone get back... I will give the poster 20 bucks by paypal...... plz help me..
Will you go to my noob guide and follow my instructions for the ALT METHOD? (its in my signature)
Be sure and download the correct files. And Please use the ODIN version I suggest.
I included videos and I suggest watching them to make sure you are not doing something silly.
If it works, give the money to a developer of your choice... or give it to me and I will give it to some I have not donated to recently.
ss10823 said:
I already posted my problems on this wall and I tried every solutions that people suggested me but it still not working....... bad.....
So I wanna say exactly what is my problems.
First of all, I rooted my phone when the version was 2.1 eclair and I did not use any custom rom I just used lagfix app
Secondary, I watched news that I was able to upgrade my phone to 2.2 froyo by official update. so I tried to update my version by kies mini without eliminating rooting system. the updating was working and my phone rebooted automatically but after I saw the hallmark as samsung galaxy s on the screen, my phone's screen was dark and I cannot see anything. Just sometimes it vibrated.
thirdly, I tried to recover by odin and official rom but it did not work.
at that time, odin stopped when it installed modem.bin (I used odin v1.0 first and I changed v1.7)
Finally, I posted my problems on this board and I got some suggestions from other great guys. so I tried 3 roms( T959UVJFD.tar, T959UVJI6.tar and another one) and I tried whole version odin to solve the problems. However, it did not work for me...........
WHatever I used different roms, odin always stopped when it installs modem.bin.... I think that is the most serious problem....
Please if you guys know how to solve this problems.... plz say me..... I will really appreciate guys..... Thanks
If I follow you guys instructions and my phone get back... I will give the poster 20 bucks by paypal...... plz help me..
Click to expand...
Click to collapse
Was there a lag fix in place when you tried to ODIN back to stock, My very first Rom I ever flashed I had OCLF in place and tried to ODIN back to the original files and it was a nightmare getting it to work. You can always blame TMO on there 2.2 update and they more than likely will give you a new phone, But follow ss10823's thread he has some good stuff out there.
Hi there.
It seems that I can't help myself anymore.
Got a prime with JB bootlader 10.4.2.18 and TWRP 2.4.3.0 on it.
Flashed SuperSU using TWRP and, after that, tried to flash
ParanoidAndroid for my device. (pa_tf201-3.10-07MAR2013-190411.zip)
Right after starting the flashing procedure TWRP seems to crash.
(It immediately shows it's splash screen again and gets laggy.)
I also tried other TF201-JB-ROMs but it happens with any of them!
I can access TWRP and Fastboot! But I got no ROM on the device
and aint able to flash one.
After hours of searching and reading it still looks like a Option 3 brick
to me and I don't know what to do next.
Some ppl tell to write the original blob from Asus' 10.4.2.18 stock rom,
others advise against that because it will get hard-bricked. I'm stuck.
Any ideas?
Seems to be solved.
Instead of using my MicroSD-card to install the new ROM I now just
used ADB to transfer the file directly onto the device.
It worked fine for cm-10.1-20130308-UNOFFICIAL-tf201.
I'll try AndroWook_Hairy_Bean_v1.51_FINAL tomorrow, or shouldn't I?
trust me andro wook HB 1.51 is the best at all !
i tried each and every one of Roms and no one can beat HB !
if u can live without changing themes or multi user features Andro Wook is best choice for u ...
must annoying issue in other none stock based Roms is that no one of them can play movies in HW acceleration mode . ( image quality will be very lower in other modes )
u should wipe system before flashing new Roms (specially after CM Roms ) ...
its a little risky but best results will come from it !
sorry for my terrible english
marleng said:
Seems to be solved.
Instead of using my MicroSD-card to install the new ROM I now just
used ADB to transfer the file directly onto the device.
It worked fine for cm-10.1-20130308-UNOFFICIAL-tf201.
I'll try AndroWook_Hairy_Bean_v1.51_FINAL tomorrow, or shouldn't I?
Click to expand...
Click to collapse
Hello. The problem is with twrp 4.2.3.0 version. Push 4.2.2.0,your problem will end.
Hello guys. I will try to describe my issue very short:
My S3 got bricked a couple of days ago where i did a "NAND FLASH" (yes i am stupid, and i dont know why i did it)
I managed to get my S3 up and running with different firmware, pit, modem, boot files. Now its running STOCK official firmware from S3 without root, and without clockwork...
The S3 is completely stock now, but my issue is:
1. I tried 4 different computers: WIndows XP, Windows 7, MAC etc. but none of them recognize my phone when i attached it, and yes the drivers are installed and i have tried different cables
2. The phone is very laggy and reboots without reason
Conclusion. I think there is something missing in the system files but i have tried every firmware (CYANOGEN too,) but the phone seems to have changed. I think there is a system android file that is still corrupt somewhere or the NAND has been affected by zombies
Please guys... i hope you can help me. -
Test the memory, search here in q&a for the app. I'd guess you have damaged the nand, which will require a motherboard replacement.
you can root using exynos abuse apk. it can be downloaded by qr code reader or directly from phone .after rooting you can use mobile odin to flash the stock rom . this requires no cable or connection to a pc. but first check the memory as boomboomer suggests. if it is damaged you might be able to replace with warranty. good luck
Memory test said "Test has passed" so i think the results are OK?
Ashraf: As i told before: I am already running stock firmware. The phone reboots by it self some times
Any other solutions?
Try the memory test from the freezing thread, if that passes then flash the stock rom again, make sure the csc in the rom matches your country and you have the right modem and RIL either included in the rom or flashed afterward.
Test fully before you log into Google or restore/install any apps. Remove the sd card during this testing.
hi
i had same problem.solved.see this post
http://forum.xda-developers.com/showthread.php?t=2285736
mostafaz said:
hi
i had same problem.solved.see this post
http://forum.xda-developers.com/showthread.php?t=2285736
Click to expand...
Click to collapse
Hello mostafaz... i dont know how to thank you but you solved my issue! I really really appreciate your help and for the solution!
It could be great if we had a database with the official PIT/PHONE etc. files :laugh:
Once again: Thank you!:good::good:
you are welcome
glad to hear u solved ur issue.
i wanna try many stock rom and have no fear ready for new problems
First, sorry if this is the wrong place, etc.
Here's what I got. I have 2 identical s3's. They are the Ntelos version, sch-r530x. One is rooted, custom recovery, and is flashed to hyperdrive verizon rom. Most of it works fine, but there are certain bugs and I need full function back.
The other device is completely stock and received an OTA update to 4.3 the other day.
I need to extract the stock 4.3 and flash it to the rooted phone to get back to a stock version and get back the functions that wont work. My phone being ntelos and the current rom being for verizon has caused quite a few issues that didnt immediately make themselves known. So I just want to be rid of the custom rom.
Now here is where I am finding a problem. My phone is sch-r530x. The verizon rom has it thinking it is an sch-i535. So when I try standard methods, like using KIES, the phone wont be recognized.
I am thinking the best option is to extract the stock rom from the completely stock device and flash it, via odin or cwm recovery, onto the rooted device. I realize I may have to root the stock device to do this, which is fine, I found a method that works for this model, the trouble only began when I flashed the hyperdrive rom (because someone else had reported good compatability....LIES).
ANY HELP HERE IS APPRECIATED!!!
Also, the reason I need to extract the stock rom from the stock device is because being a regional carrier, the ntelos rom is NOWHERE to be found online. Nobody has heard of them from what I have found, and my last 3 phones through them I have basically had to create my own root methods by piecing together bits from tutorials for other models. I have a good track record, and was able to pull it off again with this model, but I screwed up when I flashed this custom rom for the wrong model number, now nothing works quite like it should.
PLEASE HELP
Wrong forum, read the very first thread about US phones.
desperate with bootloop on GF850F
hey guys!
i'm really desperated now, i'm trying for two days to flash a new rom on my phone and troubleshoot the problems.
my phone have a bootloop and i cant break through it. i want to install a custom rom (SM-G850F Galaxy Alpha OzcanRom Aroma Lollipop v2.5 (07.08.2015)) and followed all steps correctly, but something went anyway wrong.
maybe there was a crc error while download the rom, i didnt know it because i deleted the old file and downloaded a new. now i have the problem that i cant upload it to my phone, i tried to update to the newest adb (1.4.2.) (and using this tutorial).. but when i want to push it to the phone, the console output is: "error: closed". so i googled for more information and how to fix that and came to a thread here on xda , but nothing will work.
normally i'm able to handle technical problems, i've rooted and installed custom roms on a few phones.. but this time, i'm feeling like a real noob. i'm sure, this is just a little problem and i'm only to fixed on the wrong place.
if somebody could help me, i would spend a little reward for the hero who saved my day!
What should work always is flashing stock ROM for any region with Odin. This should produce a bootable phone. Then you can go for TWRP and flash OzcanROM.
Keep in mind that you can't install OzcanROM over a 4.4.4 ROM because Ozcan is 5.0.2 based and you need the stock bootloader for 5.0.2 on your device first. This is also done by flashing stock ROM with Odin.
For fast downloading of the 5.0.2 firmware try SamFirm.