Hello everyone.
Sorry for my bad English, I'm Spanish.
Recently I upgraded to 4.4.2 EMUI KitKat 3.0, however I can not install Gapps with the ROM.
How could install?
I realized:
1) Rename unstall_apk.xml to unstall_apk.old and restart (without success).
2) I tried with ROM Manager (Recovery is in Chinese but guessed the menu '' install zip from '') but after a few seconds. . . . ''! '' in red (I gather it is a mistake).
3) I downloaded gapps 4.4. in XDA http://forum.xda-developers.com/showthread.php?t=2397942 to reset manual recovery mode. (Without success).
I do not know what to do, really can install Gapps with ROM ?, I need to run ... Cerberus Cerberus will not work without Gapps in ROM.
Please help me.
A big hug to all of you :good:
*My fault: Title written 4.2.2 , I meant 4.4.2
hello?
Whitsnak said:
Hello everyone.
Sorry for my bad English, I'm Spanish.
Recently I upgraded to 4.4.2 EMUI KitKat 3.0, however I can not install Gapps with the ROM.
How could install?
I realized:
1) Rename unstall_apk.xml to unstall_apk.old and restart (without success).
2) I tried with ROM Manager (Recovery is in Chinese but guessed the menu '' install zip from '') but after a few seconds. . . . ''! '' in red (I gather it is a mistake).
3) I downloaded gapps 4.4. in XDA http://forum.xda-developers.com/showthread.php?t=2397942 to reset manual recovery mode. (Without success).
I do not know what to do, really can install Gapps with ROM ?, I need to run ... Cerberus Cerberus will not work without Gapps in ROM.
Please help me.
A big hug to all of you :good:
Click to expand...
Click to collapse
There is actually a very simple workaround for google services (other than google+, which there is another solution), and it doesnt involve 'hacking' or meddling with system files, rooting is not even needed because even on china roms, Huawei has actually implemented the google framework within, all we need are the correct apps, simply launch the default Huawei Store (App Centre) and search for Google Play, GoogleCalendarSyncAdapter and GoogleContactsSynAdapter
After installation of Google Play, just launch it and install other Gapps u need from there
Really, simple as that.
I'd recommend you reflashing the 4.4.2 EMUI 3.0 ROM again before doing the above, if you have already messed up the system files
Thank you very much for responding.
I got downloaded from Huawei Store (App Center) Google Play, GoogleCalendarSyncAdapter and GoogleContactsSynAdapter.
Cerberus but does not work.
Does Google + Where can I download??
I downloaded Google + App Center but fails to install ...
I think Google + for Cerberus work is necessary.
Doesn't work for me. These are are showing as already installed. Deleting them and reinstalling them does not let me connect to Google's servers.
On my mobile does work (only sync contacts and calendar).
Cerberus but does not work. I'm sure that does not work Google services.
In EMUI 2.XX (4.2.2) I did the same: I donwloaded Apps of Google in AppCenter but Cerberus does not work.
I renamed unstall_apk.xml to unstall_old.xml and restart, the Gapps automatically installed. Is this not possible in MediaPad X1 EMUI 3.0 4.4.2?
No, no such file.
4.4.2 EMUI 3.0 (320 dpi)
Whitsnak said:
Hello everyone.
Sorry for my bad English, I'm Spanish.
Recently I upgraded to 4.4.2 EMUI KitKat 3.0, however I can not install Gapps with the ROM.
How could install?
I realized:
1) Rename unstall_apk.xml to unstall_apk.old and restart (without success).
2) I tried with ROM Manager (Recovery is in Chinese but guessed the menu '' install zip from '') but after a few seconds. . . . ''! '' in red (I gather it is a mistake).
3) I downloaded gapps 4.4. in XDA http://forum.xda-developers.com/showthread.php?t=2397942 to reset manual recovery mode. (Without success).
I do not know what to do, really can install Gapps with ROM ?, I need to run ... Cerberus Cerberus will not work without Gapps in ROM.
Please help me.
A big hug to all of you :good:
Click to expand...
Click to collapse
Which ROM for Mediapad X1 is both EMUI 3.0 AND 320 DPI?
---------- Post added at 04:17 PM ---------- Previous post was at 04:14 PM ----------
zaningio said:
Which ROM for Mediapad X1 is both EMUI 3.0 AND 320 DPI?
Click to expand...
Click to collapse
Sorry, my fault, I thought you were talking about 4.4.2, but now I realize you are talking about 4.2.2
I explained wrong.
Before the old version 4.2.2 unstall_apk.xml is renombraba to unstall_apk.old to restart and install Gapps. The directory was: / cust / channel / charm_china_u / xml / UNSTALL_APK.XML
Now the new version 4.4.2 unstall_apk.xml directory is different route: cust / hw / default / xml / unstall_apk.xml
The problem I have is that I can not have native Gapps (in ROM).
Whitsnak said:
Thank you very much for responding.
I got downloaded from Huawei Store (App Center) Google Play, GoogleCalendarSyncAdapter and GoogleContactsSynAdapter.
Cerberus but does not work.
Does Google + Where can I download??
I downloaded Google + App Center but fails to install ...
I think Google + for Cerberus work is necessary.
Click to expand...
Click to collapse
To get Google + working, your mediapad needs to be rooted.
Download a file manager that can access system files (Root Explorer, Solid Explorer etc)
copy the 2 attached files to:
com.google.android.maps.jar -> /system/framework/com.google.android.maps.jar
com.google.android.maps.xml -> /system/etc/permissions/com.google.android.maps.xml
set the permissions of both files to 644
reboot the device
upon reboot, you will see the 'Android is upgrading' dialog box
after successful reboot, download Google + from Play store and install
shd work fine
Cerberus too, my guess
good luck!
potatohead said:
To get Google + working, your mediapad needs to be rooted.
Download a file manager that can access system files (Root Explorer, Solid Explorer etc)
copy the 2 attached files to:
com.google.android.maps.jar -> /system/framework/com.google.android.maps.jar
com.google.android.maps.xml -> /system/etc/permissions/com.google.android.maps.xml
set the permissions of both files to 644
reboot the device
upon reboot, you will see the 'Android is upgrading' dialog box
after successful reboot, download Google + from Play store and install
shd work fine
Cerberus too, my guess
good luck!
Click to expand...
Click to collapse
It does not work. I am very sorry EMUI 3.0 upgrade to 4.4.2.
Before EMUI 2.0 4.2.2 no problem. Now many problems (apps inconsistency and error google services) ...
I did all the steps you mentioned but not Google + appears in Play Store or AppCenter ...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Is it correct values to 644?
I did root with RootGenius 1.8.7.
I rebooted and is the window '' updated 1 ... 78 ''. All right as you described.
But Google + does not appear in playstore or AppCenter.
I hate this version ... does anyone know how to do a wipe ?, the recovery is in Chinese ... is version 1.0.
I need to do a wipe and reflash again.
I need to wipe or reset factory. I have recovery 1.0 ...
I left clean and re-flash to have EMUI 3.0 KitKat 4.4.2 again.
Help!
Whitsnak said:
I need to wipe or reset factory. I have recovery 1.0 ...
I left clean and re-flash to have EMUI 3.0 KitKat 4.4.2 again.
Help!
Click to expand...
Click to collapse
try sideloading G+
http://www.apkmirror.com/apk/google-inc/google/google-4-8-0-81189390-apk/
Yes!, now I can install without problems.
Thank you very much for your help.
However Cerberus still does not work. I think missing Google services.
You know how to wipe or reset factory?
Here is a brief list of some of the software which reappeared for me after installing those two maps files:
-Easy scorecard
-Goggles
-Google+
-Learning Central
-Local ebay deals
-Met Office
-Nectar
-Network Signal Info
-Paypal
-QR Droid Code Scanner
-Traffic Monitor+
My Huawei App centre is in Chinese
His to get it in English ?
Sent from my X1 7.0 using XDA Free mobile app
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This map is for the country that cant use Navigation on Google Map. It has been hacked and can be used by any country now.
update:
maps 6.9 works great here. just download and install. If install fails, remove the existing Maps from phone and install the maps 6.9
skip the following instructions.
Installation for root:
1. In Titanium Backup, select Maps and make a backup.
2. Select Maps and wipe data, then uninstall.
3. Select Street View and wipe data, then uninstall
4. Install Google Maps 6.9 apk
5. Go to market, and reinstall street view.(download it from the second post)
or ADB
First uninstall Maps from /system/app
Code:
adb remount
adb push /Google maps6.9.apk /system/app
Alternative installation method
Note:
For those who get the "Login Failed" message Pull down the status bar and press all three triangles and give permission then closing maps.
If you don't get the three warning triangles
1. Install original maps from market.
2. Sign in and join latititude
3. Back up maps in titanium, app and data.
4. Wipe date and uninstall maps
5. Install resign version. DO NOT RUN, reboot right after installing.
6. After reboot, go to titanium and restore DATA only.
If you are using Neutrino Rom (without Google Map) then just download and install the attached file. (dont forget to flash gapps lite, elze u wont be able to login in lattitude).
Uncheck auto-update for Google Maps on the market. This thread will be updated when new Google Maps version is out!
Thanks to Brut.all, ownhere and stian230.
maps6.9 rename the file name to "Maps" and then use ROOT explorer app put in system/app permission is rw-r-r.
maps6.1.1 ownhere-signFile.apk instructions can be found in the text above.
Thanks.
How to get navigation voice in your own language
1. Download Classic Text To Speech Engine from the marked **HERE**
2. After installation, open to select the language you want (USD 2.99) to download. (or sideload )
3. Go to Android Settings -> Voice Input & Output -> Text-to-Speech settings, activate SvoxClassic at the bottom of the screen, then select SvoxClassic as the Default Engine.
Notes:
- Google Navigation requires that the Text-to-Speech voice matches the phone language. You can change the phone language in Android Settings -> Language & keyboard -> Select language.
Instructions:
1) Download a working version of the hacked map, its corresponding original version and the latest map version.
2) Extract from all apks their classes.dex.
3) Disassemble the classes.dex (hack, original & new) using*baksmali . This will create a folder of disassembled files for each classes.dex, viz., hfolder, ofolder & nfolder respectively.
4) Use a diff tool such as meld (in ubuntu) to find the differences in hfolder & ofolder.
5) Port the diff (i.e., modified parts) in hfolder to nfolder. Please make sure that they are the same file when porting (i.e., most of the other codes should match).
6) If you realise that the hacked file does not corresponds to the new file (i.e., same file name or file does not exists in nfolder), look for some codes (in the hacked file) that can uniquely identify it and search in the folder, using tools such as grep or find.
7) Copy all files in brut folder to nfolder.
8) Edit the files in brut folder of nfolder such that the references (some function calls to the map classes) in them point to the correct classes/files in nfolder.
9) Once all modifications are ported, assemble it using*smali *which will create a dex file. Name it as classes.dex.
10) Replace the classes.dex of the new map apk with the newly assembled classes.dex.
11) Resign the apk.
Google Street View APK
So, does this allow for the app to create routes without it being connected to the internet(neither wifi nor data)?
you need data enabled to download maps to your phone. once your map/route is loaded you dont need data connectivity. rest navigation can be done using gps. just turn the gps on. map will automatically locate u and without data connectivity.
Sent from my MB860 using xda premium
The best you'll ever get is a 10 mile radius. That's all google allows you too cache right now. I don't know why they won't let us have an bigger map ...
can uupload any video totorial?? it would be helpful alot.
---------- Post added at 10:34 PM ---------- Previous post was at 10:27 PM ----------
I can't use Titanium backup since my phone is not rooted. So it mean i can't get free navigation????
Thanks in advance.
mobileweasel said:
The best you'll ever get is a 10 mile radius. That's all google allows you too cache right now. I don't know why they won't let us have an bigger map ...
Click to expand...
Click to collapse
nope....it gives u almost accurate location. even more correct location when u are on road! cool app with perfect navigation!!
masood8 said:
can uupload any video totorial?? it would be helpful alot.
---------- Post added at 10:34 PM ---------- Previous post was at 10:27 PM ----------
I can't use Titanium backup since my phone is not rooted. So it mean i can't get free navigation????
Thanks in advance.
Click to expand...
Click to collapse
hmm....it will be difficult since the map is installed as a system app. try clearing cache and delete maps data. and install this version. it might help! i am not sure. better root ur phone and have full control!
the gps will be more accurate and locates faster when u turn on the navigation! quick than map/direction! voice guidance is cool
I cant install the app, did the wipe and uninstall thing. Im on Wet dream lite.
Sent from my MB860 using xda premium
Can anyone upload 6.1.1?
Sent from my MB860 using Tapatalk
thanks for the reply. i have a question if i root my phone will it be unlocked again? i have bought it unlocked from at&t.
dragoncius said:
I cant install the app, did the wipe and uninstall thing. Im on Wet dream lite.
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
Choose the correct version, do all wipes and install. or try the adb method!
manrock111 said:
Can anyone upload 6.1.1?
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
check op!
masood8 said:
thanks for the reply. i have a question if i root my phone will it be unlocked again? i have bought it unlocked from at&t.
Click to expand...
Click to collapse
unlocked again? Moto atrix, once unlocked always unlocked. can u see an "unlocked" text in your boot logo? U bought an unlocked at&t atrix right/ may be its only sim unlocked. you need to unlock the bootloader to do max out of your atrix!
I manage to wipe and uninstall Google maps & Street view
But when i tried to install maps6.1.1 ownhere-signFile.apk or maps6.1.1 ownhere.apk it says Application not installed!
I checked the logcat log
it says "package com.google.android.apps.maps has no certificates at entry classes.dex; ignoring!"
Please help me!
OK I got it, now i have simply to root my atrix. I found many toturials to root atrix but iam afraid to brick my phone. well can u sugest me the safe method to root my phone...
It would be appreciated.
masood8 said:
OK I got it, now i have simply to root my atrix. I found many toturials to root atrix but iam afraid to brick my phone. well can u sugest me the safe method to root my phone...
It would be appreciated.
Click to expand...
Click to collapse
rooting atrix is very simple if you know what you have to do!!! thanks to the developers.!! This is not the forum to guide rooting. please refer the atrix development forum!!
well i can give you the steps i did to root my phone and install custom rom!
1. download latest version of RSDLite (5.3.1)
2. Download zomgunlock-lite.sbf and atrix fastboot files.
3. Download Motorola Atrix USB Drivers, Install it. And connect your phone to Computer in RSD Mode (Power button + Vol up button)
4. Open RSDLite and browse the zomgunlock-lite.sbf. Click start if your device is shown in the RSDLite.
5. Wait untill the whole process is finished. Takes sometime, have a coffee
6. when the phone completes booting. Reconnect the device to system in fastboot mode.
7. Open Command prompt and open the fastboot folder
8. Enter the following commands
fastboot oem unlock
9. you will get a number. use the enter the same command with the number.
Enjoy your bootloader is now unlocked.
10. enter "fastboot reboot"
if you can see a text "unlocked" on your bootscreen your device is successfully unlocked and rooted. now install romracers recovery and start installing custom roms and kernels.....
happy rooting.!!!
Rukmalranaweera said:
I manage to wipe and uninstall Google maps & Street view
But when i tried to install maps6.1.1 ownhere-signFile.apk or maps6.1.1 ownhere.apk it says Application not installed!
I checked the logcat log
it says "package com.google.android.apps.maps has no certificates at entry classes.dex; ignoring!"
Please help me!
Click to expand...
Click to collapse
check if you have downloaded the correct google maps!!
same here, application not installed...
what do you mean with..."check if you have downloaded the correct google maps!!"
njarun said:
check if you have downloaded the correct google maps!!
Click to expand...
Click to collapse
i downloaded the apk that you provided at the first post...
please help
Work perfectly for mine thanks
Sent from my XT910 using xda app-developers app
Let me upload the latest gmaps!!!
WANT TO TRY SOMETHING NEW? HEAD OVER HEREhttp://forum.xda-developers.com/showthread.php?t=1913989AROMA INSTALLER - Custom gapps for Defy / Defy+ / Bravo
What is this for?
It's a custom version of the Google Apps designed to install most of the apps on the /data partition and therefore freeing some space up on the /system partition. This is because with the increasing size of roms and gapps there may be no space left as the system partition only holds ~350MB
How do I install this?
This is a customizable file (thanks to Aroma Installer) in which you can choose which apps to install. There are a some files that need to go into /system but there are others that you can have installed in /data without any problems. Just follow the instructions and you'll be fine.
Can I install on top of my full size gapps?
In theory it should be possible. What the scripts does is install what you selected and UNINSTALL what you have not selected. Meaning that if you have ie YouTube installed on you don't select it in the script it will get UNINSTALLED. In this case you should run the script twice, one for deleting all the apps and then run it again (no need to reboot) and select the apps to install.
Want to help with translation?
You can do it here: http://www.getlocalization.com/CustomGoogleApps/. If you have any doubts or prefer to translate directly from the English file let me know.
BETA USERS: Please go to http://www.getlocalization.com/gEx/ to translate the upcoming beta version
Changelog
FAQ
Credits:
AnTerNoZ's for the custom gapps for Defy
Bexton for the Offline Voice Recognition for Google Now uninstall script
Amarullz for the Aroma Installer
TUN_SD for the inverted gapps
tezet for the Google Ears app
niksy+ for the Serbian translation.
The following apps can be installed into the /data partition:
Gmail
GoogleEars (taken from tezet post, please test outside the US)
Music
Now
TalkBack
YouTube
These can get installed to /system partition
ChromeBookmarksSyncAdapter
CarHome (not included in AnTerNoZ zip)
Gallery
Phonesky
Talk
The base files (always installed in /system)
GmsCore
GoogleBackupTransport
GoogleCalendarSyncAdapter
GoogleContactsSyncAdapter
GoogleFeedback
GoogleLoginService
GooglePartnerSetup
GoogleServicesFramework
GoogleTTS
LatinImeDictionaryPack
MediaUploader
NetworkLocation
OneTimeInitializer
SetupWizard
I've also added Bexton's script to remove unnecesary files related to Offline Voice Recognition for Google Now. This is specially recommended for non-English users. This alone will free up around ~30MB on /system.
Included are also the inverted apps (where available) by TUN_SD. Please note these inverted gapps needs to be installed into the /system partition.
Here's the zip:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://goo.gl/sp3Z6 (v1.3c)
What's next?
More translations (user supported)
PLEASE BEAR IN MIND I'VE BEEN A FATHER RECENTLY AND PROBABLY ABOUT TO LOSE MY JOB SO I WILL UPDATE THIS WHENEVER I HAVE A CHANCE
changelog:
1.3c (24/09/2012)
- Added Serbian translation thanks to [email protected]
1.3b (22/09/2012)
- Fixed script error on new installations
1.3 (19/09/2012)
- Fixed Google Talk install/uninstall
- Fixed Talkback install
- Moved Google Ears to /system
- Fixed Google Ears lock outside the US (thanks to [email protected])
- Added inverted gapps (thanks to [email protected])
- Added automatic Cache & Dalvik Cache wiping
- Updated strings & small corrections to lang files
1.2b (18/09/2012)
- Cosmetic fixes
- License & changelog properly displaying now
- Fixed a few things in the lang files
- Moved back to /system Car Home, Gallery & Talk (they should work for everybody now)
- Moved Talkback to /data
1.2 (18/09/2012)
- Fixed GoogleEars uninstall
- Fixed Google Talk uninstall
- Reworked install script once again
- Properly named apps in data partition (should properly updated from Play Store)
- Added multilanguage support (English & Spanish so far)
- Added license & changelog
- Added version & size info for (almost) each app
1.1 (16/09/2012)
- Reworked install script (ability to install/uninstall)
- English language included (no hardcoded strings)
- Fixed Google Now Offline removing
1.0 (15/09/2012)
- First release (cheap & dirty)
Faq / tips / notes
FAQ / TIPS / NOTES
You should install the zip file via CWM: Recovery > Install zip from SD Card. Wiping of Cache/Dalvik is automatically handled by the script, you don't need to do anything.
if you're trying to customize an already installed full gaps you should run the script twice. First uninstall everything then run it again and
install what you want. You don't need to reboot, just uncheck "Reboot now" when you finish uninstalling in the 1st step.
Google Ears seems to be locked for people outside the US. The only way I can get it to work is to "unfreeze" it with Titanium Backup but it only last till the next reboot.
I do not plan to integrate non-Google inverted apps (like messages, phone, etc)
If the touch screen doesn't work or works erratically: When you run the installer, press the Home button and a menu should popup, select Calibration Tools using the Vol + / Vol - keys and selecting with Power button (just like recovery). You will be able to recalibrate the screen from there.
Great work, mate! And a nice idea, as well.
Btw, do tell what Phonesky is? Googleears?
And definitely looking forward to future updates with inverted apps and all!
niksy+ said:
Great work, mate! And a nice idea, as well.
Btw, do tell what Phonesky is? Googleears?
And definitely looking forward to future updates with inverted apps and all!
Click to expand...
Click to collapse
Phonesky = Google Play Store
Google Ears = Music recognition widget
Now Google Now is fast.. Thank you
I'm uploading 1.2b to fix a few things with 1.2.
Please note that if you're trying to customize an already installed full gaps you should run the script twice. First uninstall everything then run it again and install what you want. You don't need to reboot, just uncheck "Reboot now" when you finish uninstalling in the 1st step.
Version 1.3 with inverted gapps up and running!
very goog
nice work
veja_bmw_2010 said:
nice work
Click to expand...
Click to collapse
Thanks. Next plan is to add some other Google Apps.
Also, would be nice to get some feedback on Google Ears as it seems to be locked for people outside the US. The only way I can get it to work is to "unfreeze" it with Titanium Backup but it only lasts till the next reboot.
[Noob Q] Hi, how do I do this? Should I install the zip file in Recovery? And, if so, is wiping cache and dalvik necessary? Or should I install Aroma Installer first? I have only 6mb left in my System ROM.
Sent from my MB525 running on CM10 12/09 with Minimal Gapps using xda premium
Really awesome. I just want the messages app in black, and im happy haha :good:
nhb13612 said:
[Noob Q] Hi, how do I do this? Should I install the zip file in Recovery? And, if so, is wiping cache and dalvik necessary? Or should I install Aroma Installer first? I have only 6mb left in my System ROM.
Sent from my MB525 running on CM10 12/09 with Minimal Gapps using xda premium
Click to expand...
Click to collapse
You should install the zip file in Recovery > Install zip from SD Card. Wiping of Cache/Dalvik is automatically handled by the script, you don't need to do anything. Finally Aroma is not something that you install, is used to CREATE an install, so you don't have to worry about it. Just install the zip via Recovery and follow the instructions!
kazumisan said:
Really awesome. I just want the messages app in black, and im happy haha :good:
Click to expand...
Click to collapse
Glad you like it! Messages is not part of gapps but more a rom thing. I don't think I should be including it. Check the OP where I mention the post from TUN_SD to his inverted gapps. You can download that to have the full inverted gapps experience. Also, check the post by justin860 where he created an Aroma installation for that.
Thanks again for your help!
@J_M_V_S --- I've installed v.1.3 over old gapps and I don't know if deleting apps and clearing cache and dalvik always work corectly - after first reboot nothing chanaged I still had system partition full , then I cleared cache and dalvik manualy from recovery rebooted and now occupied space on system was greatly reduced ? Thanks for your work .
sebx_g1 said:
@J_M_V_S --- I've installed v.1.3 over old gapps and I don't know if deleting apps and clearing cache and dalvik always work corectly - after first reboot nothing chanaged I still had system partition full , then I cleared cache and dalvik manualy from recovery rebooted and now occupied space on system was greatly reduced ? Thanks for your work .
Click to expand...
Click to collapse
Thanks for letting me know. Did you install normal gapps or inverted?
J_M_V_S said:
Thanks for letting me know. Did you install normal gapps or inverted?
Click to expand...
Click to collapse
Normal ones .
Bug
I just wanted to let everybody know that I found a bug in v1.3. If you install this on a newly installed ROM the data/app directory will not exist and therefore all apps selected that install on /data will fail. Not much of a problem as you can get them from Play Store but I'm uploading a new version to fix this and I'll update the OP.
sebx_g1 said:
Normal ones .
Click to expand...
Click to collapse
Thanks. I'll check and let you know. Probably I will have to add a delay in the installation script.
https://drive.google.com/file/d/0B7TImVKwZ-NXX2FoaVphdVBFZzg/view?usp=sharing
Android Patch Level: September 2016
Build Date: 14th Spetember
Bugs fixed:
Theme customization crash
VoLTE fix
Improved Le Store
You need to flash SuperSU 2.78 zip (15 September build) from TeamSpain TWRP after completing initial setup wizard.
Install latest Google Play store apk to get access to Play store. (Google Play Services already installed)
Open Downloads app -> Tap Top right Settings and set Data Connection to No Limit.
Done. Rom is very smooth and stable. Battery life is yet to be checked. Chinese 17s has stunning battery life. Will compare with it later.
Is there any multi-language pack like for the 17S?
Please share some features and feedback for this new rom. Whats new??
Running this now, can't see any visual difference from 17s but all is running good at first impression.
Testing to see if my notification problem with 17S is fixed now.. fingers crossed
Can we install it with Indian version?
Yes, you can!
May I know where's the official Rom from?
I try to check the CN official site for Change log but official webpage only have 017s version as latest version.
<http://bbs.le.com/zt/eui/le_max2.html>
This version is the version leaked version of the experience know very few people I saw in the QQ group was leaked out to share with the fans look to foreign
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Playstore link redirect to eBay.... Can you fix the link?
I flashed this rom yesterday. I think, this rom is good, but fingerprint works badly.
no kernel source code leak?
How do I flash this if I have twrp and not stock recovery.?
King Krued said:
How do I flash this if I have twrp and not stock recovery.?
Click to expand...
Click to collapse
If you have TWRP, boot into your old ROM (Whichever you have currently installed) and copy the 19s update.zip file to the root of your SD Card.
Boot into TWRP recovery. Go to Wipe-> Advanced -> Wipe everything except internal storage This is important. Do not wipe internal storage.
Once the wipe is complete, go back to main menu of TWRP. Tap Install -> select the 19S file you copied and let it flash. First time during flashing, it might throw some Error 7. Go back and flash again without wiping anything and it will flash correctly.
Boot into system and make sure you Swipe to disable stock recovery. Complete initial setup wizard and install google play store APK from here. It is just regular apk install from file manager.
Download SuperSU2.78 from this link and flash it from TWRP recovery to get root access.
Comments about 19S ROM
Battery life is stunning. Standby time is also good. Great progress by EUI team. By the time this reaches perfection, another new phone would be out and we would be back to square 1.
Just a quick question,
Which recovery is working with Indian phone model x821
Whenever I am flashing a twrp, it is getting replaced with stock recovery
ok I've just installed this and my twrp teamspain 5.8 is replaced by stock recovery plz post a link for the twrp you used
i need it asap
Anyone test the LTE and switching between band? Is good as Indian roms?
ArctiX said:
Is there any multi-language pack like for the 17S?
Click to expand...
Click to collapse
The ROM include these (without flashing any pack)
Bahasa Indonesia
Bahasa Melayu
English (UK, USA)
Espanol
Francais
Portugues
Pyccknn (Russian)
Thai
Indian.
how's the fingerprint on this one? Is it good like 17s?
My experience with this ROM is good, I've installed it today without losing any data. So far no any force close and all the apps are the same (some were deleted in 016 and they didn't appear again upon installation). The method I used to flash it is described below.
Considering that everyone on this forum is at least installing TWRP and rooting their Le Max 2, to install 019s (or any EUI stock) without losing data you might want to follow these steps:
1) In SuperSU go to Settings and press "Full unroot". Also there select to restore the stock boot image.
2) Reboot the system.
3) Reboot again but in TWRP this time.
4) In TWRP, press Reboot to system and when asked to disable TWRP with the stock recovery, press "Allow disable". The TWRP will be replaced with stock recovery, thus you don't need any stock recovery.img to come at this state (this is why I think TWRP by TeaMSpaiN is very good because it is asking always to restore or not).
5) Copy the EUI 019s to internal storage and rename it to update.zip.
6) Reboot in recovery and select Update, without selecting clear data.
7) Once updating is completed, download the SuperSU 2.78 and place it to internal storage.
8) Reboot in fastboot and connect your phone to the computer and install TWRP 5.8 TeaMSpaiN.
9) After installation, reboot in recovery by the following command: fastboot boot TWRP_5.8_TeaMSpaiN.img
10) Once in TWRP, install SuperSU 2.78, xposed framework and whatever you need and reboot.
In this way I managed to install it as an update from a rooted phone with TWRP to a newer system with root and TWRP and without losing any data.
First impressions:
- old theme selection is back, it's better
- Harassment filter in Phone Manager
- Notes on desktop have been fixed. Before when I pressed "Stick to desktop", only the first line was shown in the note, now the full text is displayed.
- In Camera the "VIDEO" and "PHOTO" texts are back
- Still waiting for English language in User Manual and System Update.
- Fingerprint is as good as with 017s.
Looks like the EUI has improved a lot, it's becoming more mature and feature rich. Hopefully our Le Max 2 phones will last to see the system even better.
Many thanks sanke1 for sharing the ROM with us.
valy_cta said:
My experience with this ROM is good, I've installed it today without losing any data. So far no any force close and all the apps are the same (some were deleted in 016 and they didn't appear again upon installation). The method I used to flash it is described below.
Considering that everyone on this forum is at least installing TWRP and rooting their Le Max 2, to install 019s (or any EUI stock) without losing data you might want to follow these steps:
1) In SuperSU go to Settings and press "Full unroot". Also there select to restore the stock boot image.
2) Reboot the system.
3) Reboot again but in TWRP this time.
4) In TWRP, press Reboot to system and when asked to disable TWRP with the stock recovery, press "Allow disable". The TWRP will be replaced with stock recovery, thus you don't need any stock recovery.img to come at this state (this is why I think TWRP by TeaMSpaiN is very good because it is asking always to restore or not).
5) Copy the EUI 019s to internal storage and rename it to update.zip.
6) Reboot in recovery and select Update, without selecting clear data.
7) Once updating is completed, download the SuperSU 2.78 and place it to internal storage.
8) Reboot in fastboot and connect your phone to the computer and install TWRP 5.8 TeaMSpaiN.
9) After installation, reboot in recovery by the following command: fastboot boot TWRP_5.8_TeaMSpaiN.img
10) Once in TWRP, install SuperSU 2.78, xposed framework and whatever you need and reboot.
In this way I managed to install it as an update from a rooted phone with TWRP to a newer system with root and TWRP and without losing any data.
First impressions:
- old theme selection is back, it's better
- Harassment filter in Phone Manager
- Notes on desktop have been fixed. Before when I pressed "Stick to desktop", only the first line was shown in the note, now the full text is displayed.
- In Camera the "VIDEO" and "PHOTO" texts are back
- Still waiting for English language in User Manual and System Update.
- Fingerprint is as good as with 017s.
Looks like the EUI has improved a lot, it's becoming more mature and feature rich. Hopefully our Le Max 2 phones will last to see the system even better.
Many thanks sanke1 for sharing the ROM with us.
Click to expand...
Click to collapse
Is this rom is compatible for le 1s?????? Or not
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi there my firends,
Here some help for every Meizu M5 owner who wants the latest Flyme 6 beta version now!
Youtube video here
Installation instructions :
Prepare your phone for update and back up what you need beacuse you will have to wipe some data.
GET ROOT ACCES -> log in to Flyme account and activate root from your Settings > Fingerprint & security > Root permission
Install the following apps Open them and make sure that each whone has root permission.
SuperSu 2.79 (from http://www.supersu.com/download not the latest version)
BusyBox (Playstore link) - open the app and install the system files also
Flashify (Playstore link)
Download the Flyme 6 system image to computer, unpack the system.img file and copy it to the phone, anywhere
Follow the Flashify instructions from the picture
Good to know: I tried and succed this on my Meziu M5 global version.
In this firmware, Flyme 6.7.6.13 beta , is only English and Chinese language
Credits :http://4pda.ru/
[FONT="]I am not responsible for anything , so you better know what you're doing.
[/FONT]
:victory: Enjoy your new firmware and have a nice day!
Change img m5 global
How to change img meizu m5 versi global? Help me pliss
joldisadrian said:
Hi there my firends,
Here some help for every Meizu M5 owner who wants the latest Flyme 6 beta version now!
Installation instructions :
Prepare your phone for update and back up what you need beacuse you will have to wipe some data.
GET ROOT ACCES -> log in to Flyme account and activate root from your Settings > Fingerprint & security > Root permission
Install the following apps Open them and make sure that each whone has root permission.
SuperSu 2.79 (from http://www.supersu.com/download not the latest version)
BusyBox (Playstore link) - open the app and install the system files also
Flashify (Playstore link)
Download the Flyme 6 system image to computer, unpack the system.img file and copy it to the phone, anywhere
Follow the Flashify instructions from the picture
Good to know: I tried and succed this on my Meziu M5 global version.
In this firmware, Flyme 6.7.6.13 beta , is only English and Chinese language
Credits :http://4pda.ru/
[FONT="]I am not responsible for anything , so you better know what you're doing.
[/FONT]
:victory: Enjoy your new firmware and have a nice day!
Click to expand...
Click to collapse
Dojoe si said:
How to change img meizu m5 versi global? Help me pliss
Click to expand...
Click to collapse
I dont understand what you want bro'
If you have a global version (G) firmware then you only have to proceed my instalation instructions.
If you have a chinese version (Y) firmare then you dont need to nothing what i wrote , just download the update.zip from Flyme page
Clear ?
Dojoe si said:
How to change img meizu m5 versi global? Help me pliss
Click to expand...
Click to collapse
Please don't quote whole OP next time
how to back Global?..
Why i can't update to Flyme 6.7.6.27 beta..when i try to instal update.zip always corrupt..
Mr frodo said:
Why i can't update to Flyme 6.7.6.27 beta..when i try to instal update.zip always corrupt..
Click to expand...
Click to collapse
Neither i couldn't instal the update.zip. but with the trick i described upper by installing only the system.img with Flashify you can update to Flyme 6 beta
Whats the password to unzip the file？
---------- Post added at 11:09 AM ---------- Previous post was at 11:07 AM ----------
joldisadrian said:
Hi there my firends,
Here some help for every Meizu M5 owner who wants the latest Flyme 6 beta version now!
Installation instructions :
Prepare your phone for update and back up what you need beacuse you will have to wipe some data.
GET ROOT ACCES -> log in to Flyme account and activate root from your Settings > Fingerprint & security > Root permission
Install the following apps Open them and make sure that each whone has root permission.
SuperSu 2.79 (from http://www.supersu.com/download not the latest version)
BusyBox (Playstore link) - open the app and install the system files also
Flashify (Playstore link)
Download the Flyme 6 system image to computer, unpack the system.img file and copy it to the phone, anywhere
Follow the Flashify instructions from the picture
Good to know: I tried and succed this on my Meziu M5 global version.
In this firmware, Flyme 6.7.6.13 beta , is only English and Chinese language
Credits :http://4pda.ru/
[FONT="]I am not responsible for anything , so you better know what you're doing.
[/FONT]
:victory: Enjoy your new firmware and have a nice day!
Click to expand...
Click to collapse
I cant open the zip file...it has a password. Can you help me？
jubeilecu said:
Whats the password to unzip the file？
---------- Post added at 11:09 AM ---------- Previous post was at 11:07 AM ----------
I cant open the zip file...it has a password. Can you help me？
Click to expand...
Click to collapse
For some reason it ask for password if you try to unzip from the phone. Copy the file to your PC and you'll see that no password is required.:good:
matt_axc said:
how to back Global?..
Click to expand...
Click to collapse
Why?
There are a lot of bugs? Which?
Heating problem is still present?
Thanks
Question about firmware
Is this a port? Because there's no beta build on the Flyme official site.
My device:
Meizu M5 32GB
Thanks!
Thanks for providing this!
Everything works fine and even better than in Flyme 5.2. Even the mobile-ID works fine with this, which I use a lot to log into sites. Didn't work with 5.2. That is a huge plus for me.
Ps! The app to flash the firmware with, is FlashFire, not Flashify. Little mistake in instructions, but can be understood, when looking at the screenshots.
the link to download the system file is no more availble
the link to download the system file is no more availble
zUnEm said:
the link to download the system file is no more availble
Click to expand...
Click to collapse
The link is live again.
Is it for M5 global?
Will gaining root access voids warranty?
Is Flyme 6 really working ?
rohanghawghawe said:
Will gaining root access voids warranty?
Is Flyme 6 really working ?
Click to expand...
Click to collapse
Gaining Root won't really void warranty as you can revert it back to normal afterwards, and yes Flyme 6 is actually working
The rom is great very smooth. But sim2 cant use 4g. And i have to lock 4g manualy on sim1 from #*#*4636#*#*. Are there a way to fix this or can i switch to f6.1.0.0y stable use recovery or update to latest beta version?
New version Flyme 6.7.8.8G beta with Full update.zip
Hi everybody !
I got great news for you.
New version Flyme 6.7.8.8G beta with Full update.zip It's much more easier than ever to update to Flyme 6 . No root or any modification required.
Sadly we still have to wait for Flyme 6 Nougat version
Here is my Youtube video about this update.
I got it and it works fine
Hello everyone! Today I make this step by step guide to explain you how to enable the next generation Google assistant on your Xiaomi Mi 9 (it may also works on another phone). This is for AOSP roms like Evolution X, Pixel Experience, Lineage OS, ... Please don't try to install it on a miui rom!
This is what you will get after this guide:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So this is how to get it:
1) Download and install Magisk Manager if you don't have already it (If you have it, go to the step 5).
2) open the Magisk Manager app, then click on the install button to download the installer zip file.
3) reboot into recovery mode, then flash the Magisk zip file. After that, reboot into system mode.
4) Open Magisk, and verify that the two checks are green.
5) Go to the Download tab, then search and install the busybox and MagiskHide props config modules. After that, reboot your phone.
6) Install a terminal emulator app like Termux.
7) Open it, type "su" then the enter key. Give it the root privileges.
For the next steps in the terminal, press the enter key after each command.
8) Type "props"
9) Type "4"
Repeat these following commands with these 5 properties associated with their value
ro.product.brand => Google
ro.product.manufacturer => Google
ro.product.model => Pixel 4 XL
ro.product.odm.model => Pixel 4 XL
ro.product.vendor.model => Pixel 4 XL
10) Type "n"
11) Type the propertie (ex: ro.product.brand)
12) Type the value associated with it (ex: Google)
13) Type "y"
14) Type "n"
After these steps, you should have these properties:
15) Reboot your phone.
16) Go to the applications settings of your phone, then search for the Google app. Force stop and clear storage.
17) Open the Google, and try to launch the Google Assistant.
18) If you still have the old one, go to the more tab => Settings => Google Assistant => the assistant tab => Languages. Please make sure that you have only English (US, UK, CA, Ireland, Australia, or Singapour).
19) Download this file: https://drive.google.com/file/d/1NcWZY11AgbiQ9T8SBMqsXvlMDO40nylS/view
20) Download root explorer from the playstore
21) In this app vive the root access then copy the downloaded file to /data/data/com.google.android.googlequicksearchbox/shared_prefs
22) Select the shared_prefs folder then in the properties menu set the permissions to 551 (remove the w permissions) ans apply
23) Reboot your phone
24) Enjoy
If it doesn't work, please tell me.
I know that the images are oversized. I'll try to reduce their size.
So I followed each step and I thought it was going to work but at the last step when I open the assistant and click on start download to update it the following message appears:
"An error has occurred make sure that you are online and try again"
Do you think there is anything else I could do to make it work?
haguilarhern said:
So I followed each step and I thought it was going to work but at the last step when I open the assistant and click on start download to update it the following message appears:
"An error has occurred make sure that you are online and try again"
Do you think there is anything else I could do to make it work?
Click to expand...
Click to collapse
Try to install this apk https://drive.google.com/file/d/1fTymlp9KaeTinK2D_UqAJUmaGwexeEz-/view, then retry to launch the assistant to force the downloading of the necessary ressources. (You may have to clear one more time the google app data).
boubougaming said:
Try to install this apk https://drive.google.com/file/d/1fTymlp9KaeTinK2D_UqAJUmaGwexeEz-/view, then retry to launch the assistant to force the downloading of the necessary ressources. (You may have to clear one more time the google app data).
Click to expand...
Click to collapse
It works bro. After installing the file it allowed me to update the assistant. I read and it seems like the UI doesn't work. In my phone UI doesn't show up but it works. I am in a Redmi note k20 pro. Thanks a lot bro!!
haguilarhern said:
It works bro. After installing the file it allowed me to update the assistant. I read and it seems like the UI doesn't work. In my phone UI doesn't show up but it works. I am in a Redmi note k20 pro. Thanks a lot bro!!
Click to expand...
Click to collapse
Your welcome, but yeah i doesn't found a way to enable the new ui. But If i find it, i will update this guide.
i think the ui will work if anyone can modified the systemui with this entry, i am extracted from pixel 4 systemui...
rudirahmana said:
i think the ui will work if anyone can modified the systemui with this entry, i am extracted from pixel 4 systemui...
View attachment 4981305
Click to expand...
Click to collapse
I've tried it, but it doesn't work:crying:
Can't figure out how to create new custum prop with those 5 lines
boubougaming said:
I've tried it, but it doesn't work:crying:
Click to expand...
Click to collapse
maybe rom developer can update system ui with that flag in upcoming update
boubougaming said:
I've tried it, but it doesn't work:crying:
Click to expand...
Click to collapse
I tried everything you said, but it doesn't work. Now it says voice recognition is not available on your device. OP help!
Pixy OS AOSP (Q)
geminiboy001 said:
I tried everything you said, but it doesn't work. Now it says voice recognition is not available on your device. OP help!
Pixy OS AOSP (Q)
Click to expand...
Click to collapse
It's strange, do you have this issue only with the next gen assistant, or also with the old one? (Add a language that doesn't support the New assistant in the languages settings)
Hey, this is bit of an old thread but I'm having issues and i dont know where to turn. I've flashed PixelExperience 11and google assistant is NOT responding to (ok|hey) google commands. I've tried different version and then eventually flashed EvolutionX (Android 11). There again, google assistant doesn't work..
Given that i use google assistant on a daily bases, i kind of need it. So i found this nice thread, tried these steps but i still don't get google assistant to respond to keyword and i haven't even achieved GA2.0 using this tutorial.
Any ideas how i can make it work?
boubougaming said:
Try to install this apk https://drive.google.com/file/d/1fTymlp9KaeTinK2D_UqAJUmaGwexeEz-/view, then retry to launch the assistant to force the downloading of the necessary ressources. (You may have to clear one more time the google app data).
Click to expand...
Click to collapse
this link is not working , pls help
maretodoric said:
Hey, this is bit of an old thread but I'm having issues and i dont know where to turn. I've flashed PixelExperience 11and google assistant is NOT responding to (ok|hey) google commands. I've tried different version and then eventually flashed EvolutionX (Android 11). There again, google assistant doesn't work..
Given that i use google assistant on a daily bases, i kind of need it. So i found this nice thread, tried these steps but i still don't get google assistant to respond to keyword and i haven't even achieved GA2.0 using this tutorial.
Any ideas how i can make it work?
Click to expand...
Click to collapse
Yeah, it doesn't work anymore sadly, it seems that Google found a way to block this feature on non pixel phones