{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Release notes
Hello guys, I guess most of you have noticed that, right now, I'm just working on WeTek products (and couldn't be anything different since I really like doing this kind of stuff for them).
To prove you that WeTek Electronics cares about community and since we don't have any AMLogic S805 product, we decided to make users of MK808B-Plus happy by releasing a CyanogenMOD 11 build for them.
Most of the things I have tried work very good but. probably, few minor things might not be as stable as the stock ROM, in case report it and I will try to fix it.
First install instructions
* As really first thing I suggest you to flash stock "109k4" rom using "AMLogic Burning Tools" in case you're not already using that ROM or Finless' 1.1.
* Grab CWM from here, unzip it and copy "recovery.img" file to a MicroSD.
* Power off your device and unplug the AC power cord.
* Get the latest available ROM and GAPPS version from the links below and copy them to a MicroSD card.
* Now insert the MicroSD card in your HDMI stick.
* Plug the AC power cord while you keep pressed the little reset pinhole (located on the top left of the device) until you see the "Google TV" logo.
* Once the device has booted to recovery perform a factory reset and flash the ROM's zip for first followed by the GAPPS zip.
* Reboot and enjoy CyanogenMOD.
Update instructions
* Get the latest available ROM and GAPPS version from the links below and copy them to a MicroSD card.
* Now insert the MicroSD card in your HDMI stick.
* Enable "Developer options" following this tutorial and from it enable the "Reboot to recovery" option.
* Bring up power menu by keeping F5 (if you have a keyboard plugged in) and select "Reboot -> recovery", otherwise use the pinhole method adove.
* Once the device has booted to recovery flash the ROM's zip for first followed by the GAPPS zip.
* Reboot and enjoy your updated CyanogenMOD.
Downloads
* ROM 2015-01-20
* GAPPS 2014-06-06 (LITE)
* GAPPS 2014-16-06 (FULL, from goo.im)
Older builds
* ROM 2015-01-19
* ROM 2015-01-18
Great seeing You here, two devices coming to my home during next week! Still struggling with the problems created by the OEM power supply of the bigger brother MXQ S805, will decide if I will end my project for an in-car installation with M or S 805!
Following this thread and will be spreading it in my first language forums, if you don't mind. May I also ask if you have or will open another thread on Freaktab also?
Well done, again , thanks for your work!
Regards
Alessandro
No problem since your first language is lo stesso del mio
I already opened a thread in the "other aml s802/805" section.
To be honest I was VERY surprised by the S805, when they sent it to me I thought... it's going to be a piece of **** like the Actions ATM7029, but I really think that was Actions screwing things up because this S805 is a valid performer, specially considering the SOC's die size!
I just power it up connecting the usb port (the non-otg one) to a usb of my computer, btw it powers on even from the otg port, I keep both connected so I guess it takes 2x0.5A from the USB ports, since I have a hub connected to the full size usb port
Just ordered this little box last week. So happy to see CM support. Can't say if I will be using it or not, because I'll have to compare to stock and see what works better for my purposes, but a big thanks to you and WeTek for delivering something like this.
* ROM 2015-01-19
Upgraded a lot of code, and support for hd audio has been included. Can you confirm me that on stock MX Player can't decode HD audio as well? But works fine if you set the device to HDMI passthrough, in case you don't have an external receiver use the ARMv7 NEON libffmpeg for MX Player
Good job man, thanks a lot!!!!
testing 2015/01/19 and Kodi.
As previously announced, new build with the most updated code from Amlogic SDK.
* ROM 2015-01-20
PS: I have noticed some changes in today's update of MX Player. To have the best support on Amlogic platform go to settings -> decoder and enable all HW+ codecs but the "h264 10 bit" one, and select to automatically try HW+ mode if HW fails, in this way it will play pretty much everything automatically.
Any chance in getting a CM 11 rom for the GameStick since it's running on similar hardware? For how inexpensive it is ($17 at gamestop) would be great to see some KitKat action on it!
OTG Port does not work?
zebular said:
Any chance in getting a CM 11 rom for the GameStick since it's running on similar hardware? For how inexpensive it is ($17 at gamestop) would be great to see some KitKat action on it!
Click to expand...
Click to collapse
nope, I'm sorry.
srcs76 said:
OTG Port does not work?
Click to expand...
Click to collapse
Works for me, I use it with adb, I couldn't work without it
Christian Troy said:
nope, I'm sorry.
Would me sending you one or giving you the cost of one make a difference?
Click to expand...
Click to collapse
It's a matter of time, I already work ~12/14 hours a day with all the things I have to do, unless you send me a device to turn 24 hours day into at least 30ish...
I really want to try this but can anyone comment on whether I can use the Google TV Remote app to control the device like I can on stock?
Thank you!
It's just a matter of including some apks from amlogic vendor tree, I've not done it yet because I was focusing on more important things, like running the latest kernel and media code
Christian Troy said:
It's just a matter of including some apks from amlogic vendor tree, I've not done it yet because I was focusing on more important things, like running the latest kernel and media code
Click to expand...
Click to collapse
Not a deal breaker for me, droidmote does the same for me. Can't wait to try this later today, thank you!
Try
Hey i wanted to try your cm11 rom,
but first i want to know if your ROM includes the Stock Launcher? Or if i could be export to this?
Because i dont want it to like a phone.
And any guys of you know if there is an existing Linux Distro like Ubuntu?
Because the Odroid C1 got also the s805. And Amlogic and hardkernel offered there datasheet.
It's not included but you should be able to sideload it.
Christian Troy said:
It's not included but you should be able to sideload it.
Click to expand...
Click to collapse
Okay. I will try it . with sideload, you mean that i should export the *.apk?
yes, and try to install it
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Installation
- TWRP (I used 2.8.2.0)
- advanced wipe recomended (rom has gapps included)
- install as any other custom rom
- IMPORTANT : optimizing google play services can take some time ! took on my device 1-2 minutes.
- Initial bluetooth pairing can be skipped by using "ESC" key from keyboard or wait 2-3 minutes, the google setup via your smartphone is functional (worked for me )
bugs:
- Cast Receiver (youtube App) : sometimes it works, while it shouldn't (logcat indicates invalid certificate - as we don't have an official supported device i'm afraid I can't fix this) (removed)
- Bluetooth MOJO controller - doesn't always pair or re-pair after reboot - could be ROM related or controller related. Once paired it works quite good. more stable with lineageos 13 !
- Don't update the youtube app ! the App will crash as we currently don't support rastarization (OpenGL ES v3) https://www.chromium.org/developers/design-documents/chromium-graphics/how-to-get-gpu-rasterization
-If the installation get stuck on "finishing boot" -> wait 10 seconds, then hard reboot (pull the power) - this in only needed once.
changelog:
Code:
[B][U]lineageos-13.0-20180324-UNOFFICIAL-mojo-AndroidTV[/U][/B]
- Updated the sound config of the MOJO - HDMI sound stability is increased
- updated google assistent app to latest version
[B][U]lineageos-13.0-20180311-UNOFFICIAL-mojo-AndroidTV[/U][/B]
- Reverted the device drivers back to the ones from the initial release.
- removed google cast receiver as it continuously reports issues and as such uses resources.
- if you want cast support - I recommend installing [URL="https://play.google.com/store/apps/details?id=com.ionitech.airscreen"]https://play.google.com/store/apps/details?id=com.ionitech.airscreen[/URL]
- Default google App has been updated - to enable google assisent support - I'm testing stability.
[B][U]lineageos-13.0-20180204-UNOFFICIAL-mojo-AndroidTV[/U][/B]
New PowerHAL and AudioHAL from molly thanks to nono2loreze!
Android TV remote - voice search now functional due to new AudioHAL !
Included googlewebview by default
Other improvements from nono2loreze (ntfs support, new bluetooth config)
[B][U]lineageos-13.0-20180106-UNOFFICIAL-mojo-AndroidTV[/U][/B]
Update to match the configuration updates from nono2loreze
NTFS support is [B]NOT[/B] yet included
[B][U]lineageos-13.0-20180101-UNOFFICIAL-mojo-AndroidTV[/U][/B]
- Upgread to lineageos 13
- updated gapps to work in combination with 6.0.1 - borrowed from ADT-1 purenexus made by dhacker29
- synced bluetooth configuration from molly
- default media player plays more video formats then the one on cm-12.1
[B][U]cm-12.1-20171229-UNOFFICIAL-mojo-AndroidTV[/U][/B]
- First release :laugh:
- Leanback launcher 6.x
Location of the ROM:
Code:
File name : lineageos-13.0-20180324-UNOFFICIAL-mojo-AndroidTV.zip
[URL="https://drive.google.com/open?id=1TzuB1GcIMifW7CKYIhRwLEA90mE9i41A"]https://drive.google.com/open?id=1TzuB1GcIMifW7CKYIhRwLEA90mE9i41A[/URL]
File name : lineageos-13.0-20180311-UNOFFICIAL-mojo-AndroidTV.zip
[URL="https://drive.google.com/open?id=1Ov-uW_7s1JTk-EBa7yZxge1TFtPYtMf3"]https://drive.google.com/open?id=1Ov-uW_7s1JTk-EBa7yZxge1TFtPYtMf3[/URL]
File name : lineageos-13.0-20180204-UNOFFICIAL-mojo-AndroidTV.zip
[URL="https://drive.google.com/open?id=1ByPb9bk5rG2Hq6pX8-YMiTuqgCyh9CQG"]https://drive.google.com/open?id=1ByPb9bk5rG2Hq6pX8-YMiTuqgCyh9CQG[/URL]
File name : lineageos-13.0-20180106-UNOFFICIAL-mojo-AndroidTV.zip
[URL="https://drive.google.com/open?id=13gqJ2wiq4Z458JzW8so4DA77VMVL6oFR"]https://drive.google.com/open?id=13gqJ2wiq4Z458JzW8so4DA77VMVL6oFR[/URL]
File name : lineageos-13.0-20180101-UNOFFICIAL-mojo-AndroidTV.zip
[URL="https://drive.google.com/open?id=1pZILaAXGwQE_SJWn4QvSod5w1kL-AJnw"]https://drive.google.com/open?id=1pZILaAXGwQE_SJWn4QvSod5w1kL-AJnw[/URL]
File name : cm-12.1-20171229-UNOFFICIAL-mojo-androidTV.zip
[URL="https://drive.google.com/file/d/1mAWBJ-Unbb5PKTmO9wYeHcFGjuY4xAxd/view?usp=sharing"]https://drive.google.com/file/d/1mAWBJ-Unbb5PKTmO9wYeHcFGjuY4xAxd/view?usp=sharing[/URL]
Next step:
- fix the stuck at first boot
- Experiment more with newer gapps
- Port to lineageos 13
- port upgreads form github/Tegra4
Enjoy!
XDA:DevDB Information
Lineageos 13.0 AndroidTV, ROM for the Mad Catz M.O.J.O.
Contributors
carp_be, nono2lozere, Unjustified Dev
Source Code: https://github.com/dide0
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: lineageos
Version Information
Status: Beta
Current Beta Version: 6.0.1_r81
Beta Release Date: 2018-01-06
Created 2017-12-29
Last Updated 2018-03-26
Frequently asked questions & Tips:
Thanks to minmao:
Q: Is it possible to add an option to change the display resolution as in the stock from? My TV is a 4k set and Mojo boots into 4k automatically, however, since it only supports 4k at 30 fps, everything seems so slow and games are impossible.
A: if you choose best framerate in developer options, it gives 1080p60. Now it is perfect. Thanks again!
Q: Are gapps pre-installed in this ROM?
A: Yes, all basic gapps for androidTV are available
Q: is SU enabled by defaults
A: No, but if you want to have SU, check the detailed install instructions below for more info
Q : Any detailed install instruction ?
A : https://forum.xda-developers.com/showpost.php?p=75093267&postcount=41 thanks to King_Dex (please note flashing gapps is not needed atm).
Other tips:
The google assistent can also be enabled by sideloading the following APP:
[url]https://www.apkmirror.com/apk/google-inc/google-app-for-android-tv-android-tv/google-app-for-android-tv-android-tv-3-2-0-187674027-release/[/URL]
Works quite OK, but cannot integrate with Google Home App - so no control from a google home speaker .
The nvidia games (versioin 4.X) can also be sideloaded if people are interested , but don't try the 5.X, this will NOT work.
[url]https://www.apkmirror.com/apk/nvidia/nvidia-games/nvidia-games-4-17-21865207-release/[/URL]
Cast support : as the official google cast app is not fully functional , this App has been removed in new builds.
I recommend using :https://play.google.com/store/apps/details?id=com.ionitech.airscreen as an good alternative
Carp_be, do you have any donation link, I would be pleased to donate some " as others" I think so
P.S. or make one with : nono2lozere
Wmapa said:
Carp_be, do you have any donation link, I would be pleased to donate some " as others" I think so
P.S. or make one with : nono2lozere
Click to expand...
Click to collapse
Hey Wmapa, it's nice to propose this but for me this is a hobby project I'm not going to accept donations (how strange this might sound). If you want to do a donation then donate something to UJD, nono2lozere or lineageos. I'm just using their work to build something without their effort I would not been able to produce my "rom"'s.
It is such a nice surprise for new year!
Thank you thank you thank you!!!
Hi carp_be,
Is it possible to add an option to change the display resolution as in the stock from? My TV is a 4k set and Mojo boots into 4k automatically, however, since it only supports 4k at 30 fps, everything seems so slow and games are impossible.
≠======
I figured out: if choose best framerate in developer options, it gives 1080p60. Now it is perfect. Thanks again!
hello, great job, gave me a couple of failures at the first start. to configure it, wifi networks did not appear. connected by cable all good. Install kodi and I think there is a problem when going out and entering that sound does not work. but still it is magnificent. we wait for a new compilation fixing faults. thanks again
New build is available thanks to the effort of nono2loreze
PS : still don't update youtube App - it will still crash :'( (busy checking for solution)
Scrash313 said:
hello, great job, gave me a couple of failures at the first start. to configure it, wifi networks did not appear. connected by cable all good. Install kodi and I think there is a problem when going out and entering that sound does not work. but still it is magnificent. we wait for a new compilation fixing faults. thanks again
Click to expand...
Click to collapse
During my "tests" I rarely had issues with WiFi , I do remember that 1 time during the setup 1 had to retry 2-3 times with connecting to my network before the M.O.J.O wanted to setup a connection.
Related to your sound issue,I installed kodi on the last build and I could not "reproduce" your issue. Please try out the latest build
carp_be said:
During my "tests" I rarely had issues with WiFi , I do remember that 1 time during the setup 1 had to retry 2-3 times with connecting to my network before the M.O.J.O wanted to setup a connection.
Related to your sound issue,I installed kodi on the last build and I could not "reproduce" your issue. Please try out the latest build
Click to expand...
Click to collapse
to reproduce the problem of kodi you have to exit the program with the exit button that has kodi up to the left (do not minimize) and when entering again the sound is not heard.
Let me share some experience that may help other users using this great rom:
1. The lastest xposed installed and worked on the latest version via recovery. As you might know, the anroid TV does not support mouse right click (the same thing on the shield tv). I was able to use 'xposed addition" module to map the menu key on my air mouse to exit key, so I could have total control of the mojo without using the controller, which is heavy and stiff. Although I still have to use it to wake the mojo from sleep, since my air mouse could not. Also long press the power button on the air mouse will bring out the shutdown/restart menu.
2. If you have a 4K tv and want to have higher resolution of youtube, you could sideload the mobile version of youtube APK and you could get 1440p video. I also used youtube+ in xposed to select 1440p by default. Although I could not really tell the difference from 1080p...I tried to tell myself it does look better...
Thanks again to carp_be for the great rom and quick updates. I almost feel silly to buy a shield TV, since the mojo now could satisfy most of things I did with a shield TV.
No luck this week, I ran again into the issue with not booting on first startup with my latest build. Next week I'm ski-ing holiday, so next update would be probably middle of February
Hi there! I just came here from the fb mojo group, because I have an (stock) mojo with some problems (the system upgrade is broken), and I'm trying to install the LineageOS using @King_Dex guide (thanks, by the way), and I'm stuck in TWRP, I'm not sure I'm following the instructions right...
First of all, I have all the files recommended so far, Installed Towelroot v1, and using flashify booted using the twrp mojo img (twrp_3.2.1-0_mojo.img), but, that is! TWRP doesn't show me my SD Card (32GB SD card in a basic cardreaderm in the USB 2.0 port)
So, TWRP has any option to mount my SD card? I really hope you can help me, I want to see what I can do with the MOJO :fingers-crossed:
Thanks in advance!
Al.
TheHardCL said:
Hi there! I just came here from the fb mojo group, because I have an (stock) mojo with some problems (the system upgrade is broken), and I'm trying to install the LineageOS using @King_Dex guide (thanks, by the way), and I'm stuck in TWRP, I'm not sure I'm following the instructions right...
First of all, I have all the files recommended so far, Installed Towelroot v1, and using flashify booted using the twrp mojo img (twrp_3.2.1-0_mojo.img), but, that is! TWRP doesn't show me my SD Card (32GB SD card in a basic cardreaderm in the USB 2.0 port)
So, TWRP has any option to mount my SD card? I really hope you can help me, I want to see what I can do with the MOJO :fingers-crossed:
Thanks in advance!
Al.
Click to expand...
Click to collapse
Hi!
While in TWRP Recovery Mode, the system can only read the internal storage (sdcard0) and the external storage (sdcard1, which is the SD card slot). It cannot recognize any USB devices connected to it, and you have to directly insert your SD Card (along with the files you need) inside the specific SD Card slot of the Mojo (near the HDMI port).
EdoNINJA93 said:
Hi!
While in TWRP Recovery Mode, the system can only read the internal storage (sdcard0) and the external storage (sdcard1, which is the SD card slot). It cannot recognize any USB devices connected to it, and you have to directly insert your SD Card (along with the files you need) inside the specific SD Card slot of the Mojo (near the HDMI port).
Click to expand...
Click to collapse
Thanks! worked just right... Just finished flashing lineage, but when I was flashing the gapps arm 6.0 (stock), twrp freezed, and I had to reboot... now is booting lineageos (looking good!), but missed gaapps and addonsu... can I install them from lineage? or do i need to start again?
Update: errr... I'm doing some basic test, and the google store (androitv, I think) is working just fine... I'm kind of a lost of what to do next, any sugestions? (do I need addonsu?)
Thanks!
TheHardCL said:
Thanks! worked just right... Just finished flashing lineage, but when I was flashing the gapps arm 6.0 (stock), twrp freezed, and I had to reboot... now is booting lineageos (looking good!), but missed gaapps and addonsu... can I install them from lineage? or do i need to start again?
Update: errr... I'm doing some basic test, and the google store (androitv, I think) is working just fine... I'm kind of a lost of what to do next, any sugestions? (do I need addonsu?)
Thanks!
Click to expand...
Click to collapse
Flashing gapps is not recommended on this androidTV rom. I've included the majority of google apps needed for AndroidTV. If you think this rom is missing a major gapp, you can sideload it via the file explorer. Please let me know which once you miss then I can check if I can include them in an next update.
Best what you could do is to wipe again all data (also system) and install the rom clean. Addonsu, if you really what this should be flashed once lineageos is flashed. You can always install this later via TWRP.
On my beta builds and own running build I each time install, VLC player, MX player, these give good codex support and DS video so I can stream video's from my synology NAS.
Hi carp_be,
I would like to report an issue I just noticed.
For some reason, the resolution trick I posted no longer work in the 0106 rom, even when "optimzed refresh rate" is selected, the Mojo is stuck at 4K30 instead of going to 1080P60.
I had to flash my mojo back to the 0101 rom to get back the 1080p60 mode.
Not sure what you did differently with the newer rom, but it would great if we could get the option working again in the future release. Of course, I am happy using the 0101 rom as is.
minmao said:
Hi carp_be,
I would like to report an issue I just noticed.
For some reason, the resolution trick I posted no longer work in the 0106 rom, even when "optimzed refresh rate" is selected, the Mojo is stuck at 4K30 instead of going to 1080P60.
I had to flash my mojo back to the 0101 rom to get back the 1080p60 mode.
Not sure what you did differently with the newer rom, but it would great if we could get the option working again in the future release. Of course, I am happy using the 0101 rom as is.
Click to expand...
Click to collapse
It should be due to new proprietary blobs. Maybe a build.prop trick exist, but I don't know it.
minmao said:
Hi carp_be,
I would like to report an issue I just noticed.
For some reason, the resolution trick I posted no longer work in the 0106 rom, even when "optimzed refresh rate" is selected, the Mojo is stuck at 4K30 instead of going to 1080P60.
I had to flash my mojo back to the 0101 rom to get back the 1080p60 mode.
Not sure what you did differently with the newer rom, but it would great if we could get the option working again in the future release. Of course, I am happy using the 0101 rom as is.
Click to expand...
Click to collapse
nono2lozere said:
It should be due to new proprietary blobs. Maybe a build.prop trick exist, but I don't know it.
Click to expand...
Click to collapse
I'm having mixed feelings with the new video drivers :/ my Sony surround system (bdv e880) doesn't properly work in combination with the mojo since the new drivers (flickering on 720p - 1080p is fine) . The original molly drivers didn't had this issue. So I'll revert the drivers in next build as i'm mainly viewing on 720p tv atm . Hope this solves the "optimized refresh rate".
Next week I have again some time to start building the improvements from nono2lozere :victory:
New update available ! thanks to the new audio HAL from nono2lozere, voice search in the androidTV remote app is now working! really cool
The google assistent can also be enabled by sideloading the following APP:
https://www.apkmirror.com/apk/google-inc/google-app-for-android-tv-android-tv/google-app-for-android-tv-android-tv-3-1-2-179594536-release/
Works quite OK, but cannot integrate with Google Home App - so no control from a google home speaker .
The nvidia games (versioin 4.X) can also be sideloaded if people are interested , but don't try the 5.X, this will NOT work.
https://www.apkmirror.com/apk/nvidia/nvidia-games/nvidia-games-4-17-21865207-release/nvidia-games-4-17-21865207-android-apk-download/
We're back, boys!
This time with with Oreo 8.0.0 atvXperience v3 for S905X!
• Android OS version: 8.0.0
• For devices: S905X - TX5 Pro and a few other devices
• Recovery: AOSP
Attention:
I don't force you to use the ROM. It's stable and can be used as daily driver except for a few things.
If you don't like something, please ask me on how to remove/add it.
atvXperience and nobody from the team nor the forum moderators are responsible for bricked devices. But we always try to help as much as we can
Click to expand...
Click to collapse
Based on AndroidTV OS. Has all the features of an AndroidTV.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credit: SrWladimir
* Nayam Amarshe
* Carmine Rovito
* Taylor Stephen Hadden
* Vadim Mussin
v3wip
OneDrive - https://1drv.ms/u/s!Al5wfbQh3T0ujAttCVTpgPCowXPB
atvX Server - https://download.atvxperience.com/?dir=S905X
• Based on latest AndroidTV OS, made to be compatible with majority of S905X Devices except for wifi.
• Google Play Works
• All Google Apps Work!
• Recommendations work great! To turn off go to Settings - Home
• Casting Works with Airscreen
• Pure AndroidTV OS for now, no atvX spices.
• Ethernet is essential for setup
Please consider donating if you like our work
PAYPAL LINK
or
PAYPAL EMAIL
[email protected]
Known Problems:
v3wip
Bootanimation by atvX doesn't work
No pre-install apps
init.d not working
Wi-Fi only for a few chipsets
DO NOT FLASH WITHOUT CONSIDERING THAT THE NEW UBOOT MAY LEAVE YOUR DEVICE UNFLASHABLE!
great stable rom with oreo and atv experience (pun intended!). some minor notes:
- couldn't get to HDMI-CEC menu without going to apps in the settings and then launching the second settings apps. it would be nice if that was easily accessible.
- no wifi for me, used ethernet to get it up and running. i have the m9c max 4k box. not sure which wifi chipset it comes with.
- livetv works great without having to install anything additional for my hdhomerun network tuner. this wasn't the case with atv and 7.1.x release. apparently with 8.0, access to hdhomerun must be built in, which is great.
- really nice and clean interface. i -hated- recommendations, and this allows me to put simple couple of apps at the top for an elders without recommendations flooding the home screen.
- youtube works great.
- haven't tried, but i assume, no root ? (since i don't see supersu by default)
Great work... first and only Oreo ROM i've seen for a generic S905X install. (yes, there is other oreo image on freaktabs, but that's not atv). so a big THANK YOU! keep up the great work.
desidude2000 said:
great stable rom with oreo and atv experience (pun intended!). some minor notes:
- couldn't get to HDMI-CEC menu without going to apps in the settings and then launching the second settings apps. it would be nice if that was easily accessible.
- no wifi for me, used ethernet to get it up and running. i have the m9c max 4k box. not sure which wifi chipset it comes with.
- livetv works great without having to install anything additional for my hdhomerun network tuner. this wasn't the case with atv and 7.1.x release. apparently with 8.0, access to hdhomerun must be built in, which is great.
- really nice and clean interface. i -hated- recommendations, and this allows me to put simple couple of apps at the top for an elders without recommendations flooding the home screen.
- youtube works great.
- haven't tried, but i assume, no root ? (since i don't see supersu by default)
Great work... first and only Oreo ROM i've seen for a generic S905X install. (yes, there is other oreo image on freaktabs, but that's not atv). so a big THANK YOU! keep up the great work.
Click to expand...
Click to collapse
Thanks for the detailed feedback. This is still a work in Progress because I will eventually be launching Android Pie for S905X devices so thought it'd be a better idea to just leave this here for those wanted to test.
Thanks again for trying the ROM out
Sent from my F3116 using Tapatalk
Is it possible to root this rom?
pop4xda said:
Is it possible to root this rom?
Click to expand...
Click to collapse
Not at the moment but next version will be available for rooting.
Sent from my F3116 using Tapatalk
N'ayam Amarsh'e said:
Not at the moment but next version will be available for rooting.
Sent from my F3116 using Tapatalk
Click to expand...
Click to collapse
Thanks for the answer. I'll be waiting for the next version then.
Hi
any news ?
hello
i cant find my installed app
Hurto said:
Hi
any news ?
Click to expand...
Click to collapse
I'm skipping 8.0/8.1. atvX will now be released as 9.0 Pie version.
Sent from my Avocado using Tapatalk
N'ayam Amarsh'e said:
I'm skipping 8.0/8.1. atvX will now be released as 9.0 Pie version.
Click to expand...
Click to collapse
That's really great news. Looking forword to try it.
Thanks.
after installing this my remote wont turn my box on. before it would turn it on even when shutdown. i dont have a physical on button. how to fix this?
and i just noticed, it wont play ac3 audio through plex..?
goodgoodgoodgoodgoodgoodgoodgoodgoodgoodgoodgoodgoodgoodgoodgoodgoodgoodgoodgood
I've been trying some roms for my SAMMIX R95S 1G/8G for a couple of days until I found this one.
I'm stuck with it, can't boot to recovery, SD recovery boot doesn't work, root is not enabled. USB or TCP
Settings are really limited, and I can't enable USB debugging or ADB to flash a new rom using a USB male to male cable or even ADB over TCP IP.
I also tried a TWRP recovery.img in a microSD and in a fat formatted USB disk, but no go.
How can I wipe it and move on?
Thanks
Still stuck with this
I finally found the settings to enable developer menu, and enabled USB debug, but reset button, microSD and USB seem useless, not even any usb device detected when I connect the USB male to male cable.
I then tried with AMLogicFlashTool.exe from AMLogicTools_V6.0.0, the device connects using TCP/IP, and I'm able to flash recovery, but no way to reboot into it with the reboot buttons in the app. Then I flashed the recovery.img into boot, to see if I can boot it from there and recover a nandroid backup. Both flashes went ok without errors. But no way I get into TWRP after rebooting.
I then downloaded the latest supersu 2.8.2 and latest adb and fastboot versions to see if I can root it from console.
Adb connects ok with tcp/ip and I can even open an adb shell to the device, but I can't mount /system as rw.
I think I nearly have it, just need to find a good script to root the device through network adb.
Any help with this?
---------- Post added at 08:02 PM ---------- Previous post was at 07:35 PM ----------
I finally solved it with "adb reboot update", and then the new rom got flashed from the microSD card I prepared with Burn Card Maker.
I don't know why you disabled this SD upgrade feature, and why USB ports don't work, I lost a few hours thanks to this, but at least I learned new stuff.
Best regards!
Is there a way to install Google Assistant on this ROM? Thank
Awesome project, thank you.
"Wi-Fi only for a few chipsets"
Is there any way to know which chipset are these (the ones working). I can use ethernet to set the ROM, but then I will have to use wifi, so it would be nice to know which wifi chipsets are working.
Thank you.
N'ayam Amarsh'e said:
I'm skipping 8.0/8.1. atvX will now be released as 9.0 Pie version.
Sent from my Avocado using Tapatalk
Click to expand...
Click to collapse
Hi,
Any news / update for the new version.
Mine is an X96 mini, 2/16GB stock rom
WiFi / Bluetooth: rtl8723bs
S905W, 4 cores, 100-1250MHz, Mali-450 MP
Would love to try a new custom build for this box
Thanks
Info on update firmware
What is the procedure for upgrading from ATVX 7.1 (2FF) to this? from firmware upgrade in the options?
Hurto said:
What is the procedure for upgrading from ATVX 7.1 (2FF) to this? from firmware upgrade in the options?
Click to expand...
Click to collapse
I suggest waiting, v4 is on the way
Sent from my RMX1901 using Tapatalk
N'ayam Amarsh'e said:
I suggest waiting, v4 is on the way
Sent from my RMX1901 using Tapatalk
Click to expand...
Click to collapse
Thank you, but how do I do the update anyway?
THIS HAS BEEN REPLACED WITH V7.4 (27/10/2020) FIND HERE
https://forum.xda-developers.com/an...m-aidans-android-tv-custom-rom-7-1-2-t4104869
THIS HAS BEEN REPLACED WITH V7 (26/05/2020)
https://forum.xda-developers.com/an...m-aidans-android-tv-custom-rom-7-1-2-t4104869
This is my version 6 Rom (Second shared), i use this as a daily driver and it is stable
Improvements Made
No longer based on atvXperience
User Interface renders at full 1080p
Fixed bug where remote power button would turn box off/standby but not wake it up again
Added Miracast (scren mirroring)
Removed Chromecast and other bloat (wont work in uncertified devices and would fill storage in 24 hours)
New bootlogo and boot animation (No longer will bootanimation appear frozen during 1st boot)
Bluetooth disabled Version (now optional there is a bluetooth enabled version too)
Misc tweaks & adjustments
Im very happy with how this turned out, please install and let me know if it works for you have any suggestion
Bug: Issue with root, if anyone knows about pre rooted images advice would be good
Bug: Miracast no longer works for me(will probably remove)
Tested on
MXQ Pro 4K (1/8GB P212)
rasse-001 (unknown Ram/rom)
Install using amlogic burn tool
Download NEW V7.4 From [October 2020] (XDA LINK)
https://forum.xda-developers.com/an...m-aidans-android-tv-custom-rom-7-1-2-t4104869
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What it looks like with apps installed:
aidanmacgregor said:
This is my version 6 Rom (Second shared), i use this as a daily driver and it is stable
Improvements Made
No longer based on atvXperience
User Interface renders at full 1080p
Fixed bug where remote power button would turn box off/standby but not wake it up again
Added Miracast (scren mirroring)
Removed Chromecast and other bloat (wont work in uncertified devices and would fill storage in 24 hours)
New bootlogo and boot animation (No longer will bootanimation appear frozen during 1st boot)
Bluetooth disabled (I can re add bluetooth functonality if someone needs it)
Misc tweaks & adjustments
Im very happy with how this turned out, please install and let me know if it works for you have any suggestions
Install using amlogic burn tool
Download From Google Drive (Fast)
https://drive.google.com/open?id=1kM-yE3sHxSAntWvpSjxeeP3nbqIa536V
What it looks like with apps installed:
Click to expand...
Click to collapse
Installed today and really impressed, no lags nice interface. Just can't find how to edit home screen.
Aliux said:
Installed today and really impressed, no lags nice interface. Just can't find how to edit home screen.
Click to expand...
Click to collapse
Thanks
Edit how?, move the icons around, add custom shortcuts to non TV apps or change the wallpaper? ect...
Also What hardware did you install on?
Hello. I really liked your custom firmware. Everything works well. There is no bluetooth in the settings, you can install it or give firmware with working bluetooth. Loved but lacks bluetooth.:good:
KaShey31 said:
Hello. I really liked your custom firmware. Everything works well. There is no bluetooth in the settings, you can install it or give firmware with working bluetooth. Loved but lacks bluetooth.:good:
Click to expand...
Click to collapse
Thanks
Yes i can look at adding bluetooth, a few hours maybe
my box has no bluetooth so i cant test that functionality specifically so you would need to test it and let me know
also what box did you install on?
Bluetooth Version Now Added!!!
Hi, will this work on Mecool M8S Pro+ 2GB/16GB ?
Krappa420 said:
Hi, will this work on Mecool M8S Pro+ 2GB/16GB ?
Click to expand...
Click to collapse
Yes, i havent tested it but this rom is intended for most boxes with s905x (Universal), if you install let me know if it works well and any issues, thanks
Great custom Rom, I tried flash to HG680-P which using Armlogic S950x, 2GB/8GB, unfortunately I got error on 7% with error message "[0x32030201]Uboot/Get result/DiskInitial error
Any advice regarding case above?
Ps: After that error, I tried flash HG680-P stock rom, and success, i mean i think there is no related with software version of flashing tool or usb to usb cable.
Any feedback will really appreciated
ariey said:
Great custom Rom, I tried flash to HG680-P which using Armlogic S950x, 2GB/8GB, unfortunately I got error on 7% with error message "[0x32030201]Uboot/Get result/DiskInitial error
Any advice regarding case above?
Ps: After that error, I tried flash HG680-P stock rom, and success, i mean i think there is no related with software version of flashing tool or usb to usb cable.
Any feedback will really appreciated
Click to expand...
Click to collapse
hi Try this version of USB Burning Tool its the one ive been using for 6 months
https://drive.google.com/open?id=1oS0WAjJ-u9IaKb4GSd8zqHL4VbCHjhiW
Also when connecting the box to flash click START before you connect the box
but sounds like it dont like the uboot if you have a working ROM it may be possible to take thew uboot out of it and insert it this ROM
Hi,
I am very new to this, but this looks great. I was wondering whether you could tell me if this would also work for a S905 chipset device? I have a Trongle S2 on 5.1.1 so would like to upgrade, but cannot find any official firmware for it. Thanks!
Slash2010 said:
Hi,
I am very new to this, but this looks great. I was wondering whether you could tell me if this would also work for a S905 chipset device? I have a Trongle S2 on 5.1.1 so would like to upgrade, but cannot find any official firmware for it. Thanks!
Click to expand...
Click to collapse
Im not sure, i dont think it would work though
Could try this https://forum.atvxperience.com/viewtopic.php?f=18&t=545
it may get you booted into somthing and could take it from there
Hello, it works on MXQ S905X 64 Bits first generation WIFI ok.Just that disney + no sound I'm looking if there is not a way to modify in buid.prop so that the sound works, the sound works on youtube and others without disney +.
THANK
meric57 said:
Hello, it works on MXQ S905X 64 Bits first generation WIFI ok.Just that disney + no sound I'm looking if there is not a way to modify in buid.prop so that the sound works, the sound works on youtube and others without disney +.
THANK
Click to expand...
Click to collapse
Hi, i dont think it has anything to do with the build prop, more lightly either its a drm issue or it could be a codec issue, Android tv seems to have issues with D+ alot of the time
You could maybe try the settings and turning off any audio processing, i dont have Disney plus so i cant really test that specifically
aldo read somwhere if you start downloading what you want to watch then play it that maight work as a workaround, Good luck
will it work on dvbs2 and t2 device?????
george-cgs said:
will it work on dvbs2 and t2 device?????
Click to expand...
Click to collapse
As in a device with a tuner built in? If so then it will work probably work but the tuner might not, as long as the SOC is a S905X this should run
New update soon
Got new box, (Trongle X1) wifi not working, fix soon will add a couple wifi drivers
Hi All,
this image is working great for my NPET s905x 2G Box, as Wifi and Bluetooth are now working again!
Great work, man!
One question remain: How do I get Amazon prime working on this box, as I cant get any movie to load. it says : "Something is wrong here!"?
Cheers,
Cromatic
Cromatic said:
Hi All,
this image is working great for my NPET s905x 2G Box, as Wifi and Bluetooth are now working again!
Great work, man!
One question remain: How do I get Amazon prime working on this box, as I cant get any movie to load. it says : "Something is wrong here!"?
Cheers,
Cromatic
Click to expand...
Click to collapse
Hi ,Thanks, i think it has to do with the device not having Widevine L1 certifacation, its the reason netflix wont work either, you could try the mobile version of the app as that (as far as i know) only needs Widevine L3 (wich this rom supports) the prime and netflix (TV Verions) wont work due to this, i dont have a prime or netflix account to test the mobile versoins, if it works let me know please
https://apkpure.com/amazon-prime-video/com.amazon.avod.thirdpartyclient/download?from=details
That works fine! Thanks...you made my day!
Cromatic said:
That works fine! Thanks...you made my day!
Click to expand...
Click to collapse
Awesome thats good news
Hi everyone i recently bought an X96Q tv box with the allwinner H313 proc. 2GB/16GB rom Android 10.
I am not pleased with its stock rom. to many lags, if i link my G acc and make the updates all the apps stop working or crashes. the netflix app is ancient but its the only thing that is working so i'm searching for something alternative like a LineageOS or anyother. i installed the atv launcher but it still sucks cause of the rom....
i searched everywhere for a h313 compatible rom but with no luck. Is there anyone that could help me?
Thanks in advance
@speedakis your post is fairly new if the purchase is the same send it back. I saw a review comparing that chipset against the H616 saying the latter fixed many of the overheating issues present in the x96. if it's still possible send it back.
unless a dev buys a box and makes it a personal project I don't think we'll see custom roms or a recovery. these aren't popular enough devices to have attracted support.
As attachment there is image with magisk included.
This device is compatibile with other TV BOXes with Allwinner H616 SOC, for example Tanix TX6s - I have tested this rom with success. Bootloader button is hidden inside AV port.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Device is rooted by default and there is SU binary in rom.
To force device to installing image from img file you need run ADB command:
su
reboot efex
Software to flash image is PHOENIX Suite.
after upgrade storage become only 4.7GB.
Help me please
maras77 said:
As attachment there is image with magisk included.
This device is compatibile with other TV BOXes with Allwinner H616 SOC, for example Tanix TX6s - I have tested this rom with success. Bootloader button is hidden inside AV port.
View attachment 5152035
Device is rooted by default and there is SU binary in rom.
To force device to installing image from img file you need run ADB command:
su
reboot efex
Software to flash image is PHOENIX Suite.
Click to expand...
Click to collapse
I do the su
and
reboot efex,
but after I can't flash on PhoenixSuit because it is not detected on that mode.
What should I do?
EDIT: I've managed with PhoenixUSBPro
The same thing has happened to me, the image works but it does not have root, several attempts by adb if it has a su file, but it is not operational and the entire image is denied access.
Well with the magisk manager application I have got root and adb fastboot NDK module.
Hi, Im a newbie here. I have this TV box x96Q_max_ pro and I want to know how to root this device. TIA.
kiklox said:
Well with the magisk manager application I have got root and adb fastboot NDK module.
Click to expand...
Click to collapse
How to root with the magisk manager?
I recently bought a 4GB/64GB X96Q device. It was delivered with an older ROM that had quite some problems. Netflix for example did not work at all and video playback did suffer from lag and stutter.
After I performed an OTA update the internal storage is only 8 GB and one of the USB ports is no longer functioning. After I complained about these problems and mediation of AliExpress the seller was forced to pay me a 50% refund. In the end I only payed €10,24 for the device.
After I flashed the ROM from the link in this topic the device is working much better. Both Netflix and video playback work fine now. I only use the device as a network/DLNA and Netflix player and do not need the internal storage (8 GB is more than enough) and USB ports. There may be much better devices but in this price range the X96Q offers quite a lot of value for money.
can anybody help me how to do a shortcurt in this motherboard?
Is it able to change the launcher and manage some apps with the custom rom ????
You can use any launcher you like.
I currently use a custom version of the ATV Launcher combined with a custom wallpaper.
jw1982 said:
You can use any launcher you like.
I currently use a custom version of the ATV Launcher combined with a custom wallpaper.
Click to expand...
Click to collapse
Can i get the rom
jw1982 said:
I recently bought a 4GB/64GB X96Q device. It was delivered with an older ROM that had quite some problems. Netflix for example did not work at all and video playback did suffer from lag and stutter.
After I performed an OTA update the internal storage is only 8 GB and one of the USB ports is no longer functioning. After I complained about these problems and mediation of AliExpress the seller was forced to pay me a 50% refund. In the end I only payed €10,24 for the device.
After I flashed the ROM from the link in this topic the device is working much better. Both Netflix and video playback work fine now. I only use the device as a network/DLNA and Netflix player and do not need the internal storage (8 GB is more than enough) and USB ports. There may be much better devices but in this price range the X96Q offers quite a lot of value for money.
Click to expand...
Click to collapse
Good afternoon friend. Sorry for my English, I'm Brazilian ...
I found nothing more than this topic about the X96Q as it is a new box, and I also found the standard rom very weak. Could you ask me a question about the exchange?
Do I execute the command via ADB, disconnect the box and then connect it again to recognize it in Phoenix? It's the first time I've done the process, sorry if it's a lay question.
almeidadpx said:
Good afternoon friend. Sorry for my English, I'm Brazilian ...
I found nothing more than this topic about the X96Q as it is a new box, and I also found the standard rom very weak. Could you ask me a question about the exchange?
Do I execute the command via ADB, disconnect the box and then connect it again to recognize it in Phoenix? It's the first time I've done the process, sorry if it's a lay question.
Click to expand...
Click to collapse
Frol where did you get the rom please??
Shiinooda said:
Frol where did you get the rom please??
Click to expand...
Click to collapse
rom is no comment from maras77
do i need to run adb command or installing directly through the phoenix will run? can you say?
PhoenixSuit_V1.10 works quite easily with this box and the rom provided here. Cable usb type-A to A of course.
mestre01 said:
PhoenixSuit_V1.10 works quite easily with this box and the rom provided here. Cable usb type-A to A of course.
Click to expand...
Click to collapse
Do I use the latest TX6S firmware that is on the Tanix website or does it need to be a specific version?
almeidadpx said:
Do I use the latest TX6S firmware that is on the Tanix website or does it need to be a specific version?
Click to expand...
Click to collapse
Well obviously on Tanix website is an "official rom" with no root. The rom in the thread is rooted. With PhoenixSuit_V1.10 you can upgrade the rom without formatting which is a plus.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Home Screen With Apps
^^^NEW Home Screen, Update From Play Store ^^^
Preinstalled Apps
Initial Set Up Screen
Initial Set Up Screen 2
About
New Google Dream X Included
Google Play Protect Certified
Android TV Netflix! (Install Apk From Website)
Aidan's Custom Android TV 9 ROM For MINIX NEO U22-XJ
v8 New Features (25.July.2021)
BASED ON LATEST MI BOX Official Pie Build 3595
Security Patch 5.March.2021
Low Ram False All Roms
Forceencrypt Disabled
Default Volume MAX
New Bootanimation
More Debloating
DPI Set At 320/213
New Welcome (Thanks AcidIce18)
No Remote Pair Screen
More Cleaned & De Bloat
More Tweaks...
v7 New Features (29.April.2021)
BASED ON LATEST MI BOX Official Pie Build 3409
Security Patch 5.January.2021
NEW Mygica ATV495x (maybe more) Version Available
NEW F30UP (maybe more) Version Available
Now Includes App Drawer (Non Tv Apps)
Now Includes File Browser
Now 11 Wi-Fi Versions Available
Cleaned & De Bloat
More Tweaks...
Download
aidansrom.ml
Thanks MINIX for reaching out & sending me a box & remote to play with, as soon as i get the time i will be working on a Android TV rom for this device, Please comment if your interested in testing
Looking forward to the Android TV ROM
Update, Android TV booting, Tried with Mi Box Firmware but this has a freezing issue decoding wmv files, also tried mecool (km1) and MINIX Neo T5 ATV firmware, i will upload some testing versions soon
I did your firmware V4 but power will not turn off control will go up and down volume up and down but will not turn the box on and USB is not working s912 minix neo u9h can you fix USB on your firmware I did flash it but remote will not turn box off
antonio6o6 said:
I did your firmware V4 but power will not turn off control will go up and down volume up and down but will not turn the box on and USB is not working s912 minix neo u9h can you fix USB on your firmware I did flash it but remote will not turn box off
Click to expand...
Click to collapse
someone else reported only the usb c port worked, they used a OTG adaper to use minix USB remote
Testing Version Now Available
Aidan's ROM S922X - Google Drive
drive.google.com
will this work on Beelink GT-King?
The USB flash drive does not work, it can be recognized, but it indicates that the USB flash drive is damaged. But I don't know if it's an isolated case.
szkifen said:
The USB flash drive does not work, it can be recognized, but it indicates that the USB flash drive is damaged. But I don't know if it's an isolated case.
Click to expand...
Click to collapse
I think its broken NTFS, the same fix i tried before didnt seem to work, i still want to convert the stock firmware to android tv, this should result in far fewer bugs but not managed to get it working properly yet
Yo Aidan, I hope you're doing well. I'm considering to buy MINIX NEO U22-XJ and help you with testing. What is the current status for this device and what is the rom based on?
Cheers
p1trson said:
Yo Aidan, I hope you're doing well. I'm considering to buy MINIX NEO U22-XJ and help you with testing. What is the current status for this device and what is the rom based on?
Cheers
Click to expand...
Click to collapse
hi, it is an awesome device and stock firmware is solid and works very well with great video decoding capabilities, my rom is based on the stock firmware and mi box firmware port, means its always posible to return to stock, im learning as i go about all this
Hi Aidan. Does your version actually with on the u22? Also, is it capable of playing hd audio? (Dts-hd, dts-x) or aac 5.1/7.1 correctly?
aidanmacgregor said:
someone else reported only the usb c port worked, they used a OTG adaper to use minix USB remote
Click to expand...
Click to collapse
Yes I know OTG adaper is working I managed to maneuver firmware V7 s912 but still cannot turn on and off. Can you manage to do a little adjustment on your firmware.for The Minix Neo U9h s
sorry still some audio codec issues, but V8 is now available
There is a way to ROOT your firmware, it is only to install apps as if they were from the system, like YouTube and Google TV (or Google play movies in my region)
mekler22 said:
Hi Aidan. Does your version actually with on the u22? Also, is it capable of playing hd audio? (Dts-hd, dts-x) or aac 5.1/7.1 correctly?
Click to expand...
Click to collapse
i suspect there are going to be some audio decode issues, im still learning and is somthing im working on, i dont haveany surround sound to test on either so feedback would be needed
IoriYagami2001 said:
There is a way to ROOT your firmware, it is only to install apps as if they were from the system, like YouTube and Google TV (or Google play movies in my region)
Click to expand...
Click to collapse
i will have a rooting guide available soon
Root Guide Now Available
Hello Aidan;
First thank you for all your work , i successfully update an old Tanix T9( with your other rom).
I own a Odroid N2+ and i would like to test this version on it, but when i want to burn the .img with Etcher, it simply do not work and when i try the Amlogic Burning tool with OTG on the N2+, the device is not recognized.
It would be interesting for me because i currently use Voodik atv version (which works well) but without some codecs its difficult (e.g: Disney+ , 6play).
What can I do to make it testable?
Frodroid said:
Hello Aidan;
First thank you for all your work , i successfully update an old Tanix T9( with your other rom).
I own a Odroid N2+ and i would like to test this version on it, but when i want to burn the .img with Etcher, it simply do not work and when i try the Amlogic Burning tool with OTG on the N2+, the device is not recognized.
It would be interesting for me because i currently use Voodik atv version (which works well) but without some codecs its difficult (e.g: Disney+ , 6play).
What can I do to make it testable?
Click to expand...
Click to collapse
Hmm look like this device uses etcher to flash, i havent seem this before, if you can find some way to unpack the rom you have, take system.PARTITION, product.PARTITION ANd logo.PARTITION From my rom then replace in yours, rickys toolay work, not sure if odrood have a diffrent firmware format