[Video Review] [1/31] Nillkin Bumper, TUDIA, Cruzerlite, Supcase, Spigen - Nexus 6 Accessories

I made some short video reviews of my current cases. I have some more cases on the way that I will add to the reviews below.
TUDIA:
TUDIA TPU Case
Cruzerlite:
Cruzerlite TPU Case
Spigen Ultra Hybrid:
Spigen Ultra Hybrid
Nexus 6 Beggos pouch:
Nexus 6 Pouch
Supcase Hybrid Beetle:
Supcase Hybrid Beetke
Nilkin Bumper case (black)
This case isn't for everyone but I enjoy the nice look of a "bumper style case". The case isn't what I would normally call a bumper case but its still nice for $7. The buttons have an alright feel (they can get a little spongey) and the protection is what you would expect from a bumper. The bumper makes my phone larger than the Spigen Ultra Hybrid which is surprising considering that its just a bumper and the Spigen is a full case. The design could have been better by making it smaller. The charging port is a fair size and will fit the stock cable just fine with a very minimal bulge. The headphone cut out is also on the smaller side but it should fit most headphones. Overall its a decent case for the money, and if you want a bumper I'm sure you will enjoy it.
Nillkin Bumper (w/o phone):
Nillkin bumper (with phone):

Hey Pilz, great videos however I think it is not embedded properly on the forums because all I see are white boxes
try : [EXAMPLE:YOUTUBE]watch?v=KV6zJoxF8Ws[/YOUTUBE]
remove the "EXAMPLE:"

th3xeroeagle said:
Hey Pilz, great videos however I think it is not embedded properly on the forums because all I see are white boxes
try : [EXAMPLE:YOUTUBE]watch?v=KV6zJoxF8Ws[/YOUTUBE]
remove the "EXAMPLE:"
Click to expand...
Click to collapse
Thanks I'll fix the videos when I get home today. I'm waiting in a class to start currently so I can't change them until its over.

OP Updated Nillkin bumper added

Related

Any recommendation for a slim protecting case?

So I bought the Spigen slim armor with kickstand case just recently and found that it is rather a thick case and added bulk to the N6. It in turns made the N6 not be able to fit the car mount I bought. Anyone got recommendation for a good slim case?
Car mount: http://www.amazon.com/gp/product/B00HRKI5V2?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
Ringke Slim Case.
But keep in mind. Slim cases like this offers less protection.
I really like my Diztronic case. It's thin and feels well protected. A few videos on YouTube where people do drop tests and it came out without a scratch.
Sent from my Nexus 6 using Tapatalk
I got the spigen hybrid. Fits nice with flush buttons and see through nack. Looks great
Sent from my Nexus 6 using Tapatalk
MrBrady said:
I really like my Diztronic case. It's thin and feels well protected. A few videos on YouTube where people do drop tests and it came out without a scratch.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Got the diztronic... its not like its slim
The slimmest i have is ringke
Try Orzly case, it is very very thin.
The Ringke Max is actually pretty 'slim' with a lot of protection. If you want close to naked feel, then the Ringke Slim might be best, but really not that much protection.
PHATLET
vboyz103 said:
So I bought the Spigen slim armor with kickstand case just recently and found that it is rather a thick case and added bulk to the N6. It in turns made the N6 not be able to fit the car mount I bought. Anyone got recommendation for a good slim case?
Car mount: http://www.amazon.com/gp/product/B00HRKI5V2?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
Click to expand...
Click to collapse
I bought the Spigen Ultra Hybrid (clear), Thin Fit (clear), Slim Armor and S Wallet. IMO the Slim Armor fit and looked the best, but FAT. The TPUs just made the phone uber FAT(er). The wallet hinge/flap/binder thing is too loose and flabby [I wanted tight form fitting].
I ordered several generic gel jelly slim TPU.
First one to arrive is one with a logo that reads INSTEN and I am very impressed by it.
It's tight (queue up Micheal Meyers), lip is thin and holds on to the frame without going over on to the glass, barely raised ever so slightly higher than the screen.
It makes the screen/viewing pop out (it might be the color I chose, yellow).
The cutouts are great, the thinly covered raised areas over the power and volume rocker are just right (if you have the slim armor you might experience what I have, where touching the buttons is just too sensitive).
Grippy and sturdy. Knocked some on the table, I'd use it to press some buttons, sure..
I might go order more colors.
Usually I like Goospery Mercury Gel TPU cases on my phones, but haven't found any made for the N6.
EDIT: easy in and out from pocket.
Thanks guys for your suggestions. I think I'm going to go with the slick wraps full body because it does not add any bulk and provide some protection.
clockcycle said:
I bought the Spigen Ultra Hybrid (clear), Thin Fit (clear), Slim Armor and S Wallet. IMO the Slim Armor fit and looked the best, but FAT. The TPUs just made the phone uber FAT(er). The wallet hinge/flap/binder thing is too loose and flabby [I wanted tight form fitting].
I ordered several generic gel jelly slim TPU.
First one to arrive is one with a logo that reads INSTEN and I am very impressed by it.
It's tight (queue up Micheal Meyers), lip is thin and holds on to the frame without going over on to the glass, barely raised ever so slightly higher than the screen.
It makes the screen/viewing pop out (it might be the color I chose, yellow).
The cutouts are great, the thinly covered raised areas over the power and volume rocker are just right (if you have the slim armor you might experience what I have, where touching the buttons is just too sensitive).
Grippy and sturdy. Knocked some on the table, I'd use it to press some buttons, sure..
I might go order more colors.
Usually I like Goospery Mercury Gel TPU cases on my phones, but haven't found any made for the N6.
EDIT: easy in and out from pocket.
Click to expand...
Click to collapse
That INSTEN case is identical to the Caseology cases. Probably made in china, and companies just put their own name on it. But they look OK with medium protection.
vboyz103 said:
Thanks guys for your suggestions. I think I'm going to go with the slick wraps full body because it does not add any bulk and provide some protection.
Click to expand...
Click to collapse
I'm not doubting your choice, as it's your phone. But any "protection" you get from a skin will be just to prevent scratches and no drop protection. Good luck.
wolfen69 said:
That INSTEN case is identical to the Caseology cases. Probably made in china, and companies just put their own name on it. But they look OK with medium protection..
Click to expand...
Click to collapse
I dont have the caseology, but from the images I can agree, sans dimple. It's a good thing being at 1/3rd the price. I went ahead and bought green and black as well. It is so far my fave case.
I'll add, you know the form, shape that the phone has, makes it fit well in the hand and really gives it that unique feeling that it is a much smaller phone. This case INSTEN keeps that feeling intact..
MrBrady said:
I really like my Diztronic case. It's thin and feels well protected. A few videos on YouTube where people do drop tests and it came out without a scratch.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
I also really like the diztronic case. Minimal and functional.
I actually have the carved case and it's really slim and seems somewhat protective. Especially since it's made of real wood!
CASE
SUPCASE UNICORE BEETLE is pretty sweet!
WINEMK68 said:
SUPCASE UNICORE BEETLE is pretty sweet!
Click to expand...
Click to collapse
Agreed. Fairly protective without being too bulky. Good grip too.
Does anyone have a recommendation for a case that preserves the top heaviness and dramatic tapering of thickness at the bottom of the phone? Basically I'm as concerned about drop protection as preserving the original "feel" of the phone.

Nexus 5 case

I'm looking to buy a new case to replace the official bumper case. However I can't decide between ringke fusion, spigen ultra hybrid and tech21 impact frame. Also I want to have a skin, so the case needs to have enough room for that.
Thanks

Thin clear case with bumper?

I bought a Spigen Neo Hybrid Crystal which I like a lot except the bulkiness which ruins the overall look compared to my generic 0.7mm thick clear TPU case. Is there any clear tpu case with a hard edge section that's still thin?
For my flat version. Have a look.
MaxTeck Slim TPU Transparent Bumper Case for Samsung Galaxy S7
Luvvitt has a nice one on Amazon.

Cases

Any reviews or feedback on cases. I've always used a thin spigen TPU case with the carbon fiber look. Wouldnt mind another one or a suede feeling case.
Most of the good looking ones on ebay show no cutout on the rear for the fingerprint.
Thanks
I ordered the FitBag Beat in black from Amazon.com for the Xioami Mi Max 2 and it is the perfect fit sleeve/bag for the Mate 20 X. It works by itself or with the gel Case that came with it. Add a wallet sticker dohicky thing and it's a prefect wallet sleeve.
Here some really good and good quality smart (wake & sleep) flip cases from Aliexpres.
Those on the picture is genuine leather [emoji1303]
https://s.click.aliexpress.com/e/cqlvg5GG
https://s.click.aliexpress.com/e/bfXauUBm
https://s.click.aliexpress.com/e/F3fpRb2View attachment 4639846
For those of you who like the transparent cases i found one that is awesome. It has more screen protection than the stock case and has more corner protection. It's one of the best clear cases I've bought. It's similar in quality to a Spigen or Rinke Fusion case but 1/3 the price. I bought it from here:
https://www.ebay.com/itm/For-Huawei...var=432149566435&_trksid=p2060353.m2749.l2649
ajsmsg78 said:
For those of you who like the transparent cases i found one that is awesome. It has more screen protection than the stock case and has more corner protection. It's one of the best clear cases I've bought. It's similar in quality to a Spigen or Rinke Fusion case but 1/3 the price. I bought it from here:
https://www.ebay.com/itm/For-Huawei...var=432149566435&_trksid=p2060353.m2749.l2649
Click to expand...
Click to collapse
Grippy?
Anyone know where can I find this case?
I got this case and I feel it could provide decent protection. I am never a fan of thin or thick case. It's impossible to provide enough raised edges on thin cases. This case isn't perfect but I didn't find anything better yet.
torr310 said:
I got this case and I feel it could provide decent protection. I am never a fan of thin or thick case. It's impossible to provide enough raised edges on thin cases. This case isn't perfect but I didn't find anything better yet.
Click to expand...
Click to collapse
Got a link for this case?
I got mine from eBay but you could find it from AliExpress too.
https://www.ebay.com/itm/B-Case-For...543614?varId=453102348942&txnId=1795995856005
I received my carbon fiber skin today, It fits perfectly and has the camera protector as well.
ajsmsg78 said:
I received my carbon fiber skin today, It fits perfectly and has the camera protector as well.
Click to expand...
Click to collapse
Do you have a Link?
Just Google MojoSkins.
I got a few from them. Thier full protection skins are great but hard to get on perfect. The back portion goes on easy as the skin is thick making application simple. They also over back protectors (no side/top/bottom flaps) that I think work best.
Bought this J&D case off Amazon for $10.99CND. Not too bulky. Wicked drop protection soft TPU inside Hard shell outside. Plus has plugs built in to protect charger port and headphone jack. Plus the volume and power buttons are super clicky. Highly recommend.
The clear TPU case provided with the phone is functional (I dropped my phone onto a hard floor with this case on and the phone was fine), but I do find the phone 'slippery' to pick up with this case. I have the Nillkin nature series tpu case for my Xiaomi Mi Max 3 (same size phone) and it is great because its edges are coated with a frosted grip material. Nillkin make this case for the Mate 20 and Mate 20 lite, but not for the Mate 20 x. Does anyone know of a similar clear TPU case that (unlike the Huawei one) has frosted edges for a better grip?
I have quite a few cases and have a few more on the way. I was thinking of doing a case review eventually.
Still no cases made especially for the stylus pen?
Ditto on looking for a case that will also hold the pen.
Found one with pen holder!
https://www.ebay.com/i/332950831527?chn=ps
Ron
Nicey, nicey thx... Now ordered [emoji3]
ronr9286t said:
Found one with pen holder!
https://www.ebay.com/i/332950831527?chn=ps
Ron
Click to expand...
Click to collapse
Sendt fra min EVR-L29 med Tapatalk
i just got a Slim case from China, is made by TPU with a matte back ( no slippery ) finish. Is one of the most slim case i have ever seen, but in the same time it protect the phone very good. I got it for around 4 euro Free Shipping to Europe. it also come very good protected inside the package with bubble wrap
I have also look at another case ( Porsche Design ) made by TPU with a Tinted Tempered Glass Semi-Transparent back... i ask the seller to send me a Real Picture and he send me this one

Spigen Marked Armor vs Rugged Armor

What's the difference?
spigen marked armor vs rugged armor
Thanks in advance,
The rugged armor is well, more rugged and bulkier. Thus a little more protection. Marked armor is a nice case but offers little protection of the screen and camera. They pretty much sit flush ( i.e. no lip ) with the edge.
LonestarROB said:
The rugged armor is well, more rugged and bulkier. Thus a little more protection. Marked armor is a nice case but offers little protection of the screen and camera. They pretty much sit flush ( i.e. no lip ) with the edge.
Click to expand...
Click to collapse
The images on Amazon looks like the complete opposite but I will take your word for it.
vic_singh said:
The images on Amazon looks like the complete opposite but I will take your word for it.
Click to expand...
Click to collapse
Ah man, no no no, I'm sorry! I got the rugged armor confused with the spigen slim armor case. Sorry about that man. Can't comment on the rugged armor, but the Marked armor provides little screen and camera protection.
Here is a link to a Rugged armor review.
https://forum.xda-developers.com/hu...s/spigen-rugged-armor-huawei-p20-pro-t3777178
Sorry again.
Been following this as well and personally always regarded the rugged armor as nice but something that has grown into a generic Spigen design that gets scaled/cut to fit the receiving phone.
The marked armor for the P20 series looks like its a redesign or extension of the old rugged style for vertical running camera setups and also has a bit of a raised lip to protect the raised camera bump. Actually I'm on the spigen website now and it appears like they are reverting back to the 'Rugged' name for the upcoming series (see P30 renders) instead of running with both 'Marked' and 'Rugged' labels. Raised lip and wider hatch patterns looks to be present for the rugged case design for vertical running multi camera setups
Anyhow, I've taken a gamble and ordered one to see if the marketing holds true. haha

Categories

Resources