Hi Guys,
I thought of creating an official Modem list for the Samsung Galaxy Note 3 Neo N7505 Modems only for KitKat 4.4.2
I will be adding all the modems available in Modem.bin .
What is a modem?
Modem/Radio/Baseband is all the same thing and can be seen by going to Settings - About device - Baseband version. It's basically a driver which receives and sends Mobile Network signals as well as handling switching between GPRS, 3G, HSDPA etc....... (but not WiFi connection, that and switchover between Mobile Network and WiFi is handled by the kernel). Reasoning as to why Modem has no influence on WiFi can be found in this post by Entropy
Why?
Sometimes some custom Roms come with modems for various regions. If your modem is designed for different regions than yours then the chances are that it will sometime not work with optimal network performance.
You should look into changing your modem if you are experiencing the following :
Poor 3G speeds
Very fast battery drain whilst on 3G
Poor call reception
How to check:
Settings >> About device >> Baseband version
How to flash the Modem:
Open Odin and click on CP button the select Modem.bin file and make sure everything is unchecked just AutoReboot then press start and your device will reboot with the new Modem
---------------------------------------------------------------------------------------
Modem List:
N7505XXUCNG2 (Middle East & Europe & South East Europe & Nordic countries)
N7505XXUCNL1 (Hungary & Romania & Portugal & Bulgaria & Slovakia & Baltic)
N7505XXUCNK1 (New Zealand )
Odin Download:
Odin3_v3.09
Odin3_v3.10.6
Correct the links setting...Now they are working
good work, I will try XSG I hope it solve my signal issue.
Thanks
N7505XXUCNK1 added & Odin Links
if someone put stock rom for example Hungary COA1 rom with CNL1 baseband version, can then put with Odin CNG2 modem driver for South East Europe. Is there any differents?
igy_tab said:
if someone put stock rom for example Hungary COA1 rom with CNL1 baseband version, can then put with Odin CNG2 modem driver for South East Europe. Is there any differents?
Click to expand...
Click to collapse
It depends on which country he live, maybe he will get better signal for network or worse signal.
If you have any problem with signal or wifi just try another modem.
How to
How can I backup actual modem before try another one?
Zelota91 said:
How can I backup actual modem before try another one?
Click to expand...
Click to collapse
On settings---about phone---Baseband to know which modem you use,
then you can try another modem and if you want to back to the original modem just download it from here.
I have the modem firmware N7505XXUCNG2 Italian released in October.
I have problems when switching from 4g to 3g for blocks.
In your modem bin above downloadable up is possible to date than the one I use? or should try the other modem?
Then I wanted to know if I make the flash konox goes to 1?
to restore just redo flash firmware or old modem?
claudioxe said:
I have the modem firmware N7505XXUCNG2 Italian released in October.
I have problems when switching from 4g to 3g for blocks.
In your modem bin above downloadable up is possible to date than the one I use? or should try the other modem?
Then I wanted to know if I make the flash konox goes to 1?
to restore just redo flash firmware or old modem?
Click to expand...
Click to collapse
You should try another Modem, try this one N7505XXUCNL1
to restore just flash the old modem.
I don't think it will trip Knox because you flash something official not modify, but I'm not sure!
Also Italian ver has old kernel you can flash latest one 14jan2015 it's more smooth&good battery...
but flashing kernel will trip Knox because you will use custom recovery
http://forum.xda-developers.com/note-3-neo/general/note-3-neo-n7505-stock-kernels-t3016284
Muhammad Rihawi said:
You should try another Modem, try this one N7505XXUCNL1
to restore just flash the old modem.
I don't think it will trip Knox because you flash something official not modify, but I'm not sure!
Also Italian ver has old kernel you can flash latest one 14jan2015 it's more smooth&good battery...
but flashing kernel will trip Knox because you will use custom recovery
http://forum.xda-developers.com/note-3-neo/general/note-3-neo-n7505-stock-kernels-t3016284
Click to expand...
Click to collapse
clarification
with odin 3.0.9 I have to select the CP and then I have to do the flash file modem.bin or do I create a file .tar.md5 (that include only modem.bin file) and then flash?
I ask because I had found a guide where it was indicated to create a file that .tar.md5 is the same type of file that the offical firmware
thanks
claudioxe said:
clarification
with odin 3.0.9 I have to select the CP and then I have to do the flash file modem.bin or do I create a file .tar.md5 (that include only modem.bin file) and then flash?
I ask because I had found a guide where it was indicated to create a file that .tar.md5 is the same type of file that the offical firmware
thanks
Click to expand...
Click to collapse
No need to make tar file, just put modem.bin in CP section and make sure everything is unchecked just AutoReboot checked then flash it.
Muhammad Rihawi said:
You should try another Modem, try this one N7505XXUCNL1
to restore just flash the old modem.
I don't think it will trip Knox because you flash something official not modify, but I'm not sure!
Also Italian ver has old kernel you can flash latest one 14jan2015 it's more smooth&good battery...
but flashing kernel will trip Knox because you will use custom recovery
http://forum.xda-developers.com/note-3-neo/general/note-3-neo-n7505-stock-kernels-t3016284
Click to expand...
Click to collapse
I made flash modem.bin N7505XXUCNL1 - knox still has the value zero.
Now I have to see if I do not have blocks in change 3g / 4g
thanks for everything Claudio
:laugh:
claudioxe said:
I made flash modem.bin N7505XXUCNL1 - knox still has the value zero.
Now I have to see if I do not have blocks in change 3g / 4g
thanks for everything Claudio
:laugh:
Click to expand...
Click to collapse
great, you are welcome
inform me if your issue solved
Muhammad Rihawi said:
great, you are welcome
inform me if your issue solved
Click to expand...
Click to collapse
until now no block with the new modem. i'm glad.
now i have the Italian firmware with baseband relative to other fimware: N7505XXUCNL1 (Hungary & Romania & Bulgaria & Portugal & Slovakia & Baltic)
it can do any problems?
I wanted to know if you think the RIL not aligned could bring problems such as an increase in consumption of the battery?
I then noticed that receiving telephone is 'very poor. can you tell me if your samsung note 3 neo has received telephone low?
problem
Hello I have a problem with the flash of the modem is Romanian new zealand I follow everything there is written in the guide put start begins and after a few seconds I say fail I tried it with version 3.09 the odin 3.10 the 3.07 the 1.85 but nothing the result is always the same .. fail ..
claudioxe said:
until now no block with the new modem. i'm glad.
now i have the Italian firmware with baseband relative to other fimware: N7505XXUCNL1 (Hungary & Romania & Bulgaria & Portugal & Slovakia & Baltic)
it can do any problems?
I wanted to know if you think the RIL not aligned could bring problems such as an increase in consumption of the battery?
I then noticed that receiving telephone is 'very poor. can you tell me if your samsung note 3 neo has received telephone low?
Click to expand...
Click to collapse
For battery you must notice if there is any issue,
for signal it depends in your area and how it was before.
you must choose what the best modem for you.
daron96 said:
Hello I have a problem with the flash of the modem is Romanian new zealand I follow everything there is written in the guide put start begins and after a few seconds I say fail I tried it with version 3.09 the odin 3.10 the 3.07 the 1.85 but nothing the result is always the same .. fail ..
Click to expand...
Click to collapse
I don't understand which modem you try, new zealand or Romanian?
also try another modem to see from where the problem..
just put the modem.bin in CP section and open download mode in your mobile and flash it..
don't change the name of the modem keep it ( modem.bin ) .
Muhammad Rihawi said:
I don't understand which modem you try, new zealand or Romanian?
also try another modem to see from where the problem..
just put the modem.bin in CP section and open download mode in your mobile and flash it..
don't change the name of the modem keep it ( modem.bin ) .
Click to expand...
Click to collapse
I solved thanks
Muhammad Rihawi said:
For battery you must notice if there is any issue,
for signal it depends in your area and how it was before.
you must choose what the best modem for you.
Click to expand...
Click to collapse
unfortunately I got another phone lock that it did not receive phone calls, data.
according to you if you tried to flash a modem or three notes of the S5 could solve the problem?
have any suggestions?
Related
Well, after flashing some roms, I got this message right now (*#1234#)
AP: I9300UBALE6
CP: I9300UBLE6
CSC: unknown
This ROM is at my SG3: Samsumg Stock: I9300UBALE6 / CSC I9300ZTOALE7
And the original one was CSC I9300ZTAALE6.
Can you help me?
Guide here in OP:
[Guide+ROMS]Odin Flash+Root Guide & Stock Firmwares LE4/6/8/9/F/D, LF1/2
Post #11 >> individual CSC packages
My modem isn't there! Should I flash any other???
raphaelmo said:
My modem isn't there! Should I flash any other???
Click to expand...
Click to collapse
My apologises, CSC are in post #10
http://forum.xda-developers.com/showpost.php?p=26530885&postcount=10
Just use the guide in post #1 to flash with Odin CSC section
Sent from my GT-I9300 using xda premium
If you used MobileODIN, try reflashing the same ROM, but having the .md5 in the external SD card, not in the internal storage.
I had this issue once and that's what worked for me.
Anyhow, forget about the Brazilian ROMs (such as ZTO). They are all outdated already.
Get one from NEE (new) or ITV (newest). They are better, newer, leaner and work flawlessly in Brazil (and yes, they both contain Brazilian Portuguese).
may I ask you to show me which one (ITV) should I use? Or just tell me what country I should look for in checkfus!
Thanks !!
raphaelmo said:
may I ask you to show me which one (ITV) should I use? Or just tell me what country I should look for in checkfus!
Thanks !!
Click to expand...
Click to collapse
Raphael, if you're going to use the non-GUI version of CheckFus Downloader, this is the command line to get it:
Code:
CheckFusDownloaderCmd.exe -dl I9300XXALF6/I9300ITVALF1/I9300XXLF5/I9300XXALF6 ITV GT-I9300
Otherwise, for the GUI version, just copy/paste the parts below in the "Firmware info" of CheckFus Downloader 2.1:
Product Code: GT-I9300MBDITV
PDA: I9300XXALF6
CSC: I9300ITVALF1
Phone: I9300XXLF5
then click on "Check Firmware" and then "Download".
it was not so easy to find it in checkfus...I didn't find in gui version, and on nongui I downloaded, but after the download the program crashes and broke the file. 3 times.
But I found it at Sammobile, downloaded and already flashed! Thank you again!
Mine's also says CSC Unknown... I'm on Official JB Polish rom... do I have to flash that CSC package?? But what is the one correspondent to the Official JB Polish??
I have the same thing after the Polish ROM. Does having an unknown CSC actually matter for any reason?
Threads seem to indicate that it doesn't, and my phone is working normally, but maybe I'm missing something obvious.
CSC may play a part if your network has fast dormancy .
CSC essentially contains a list of network setting for local areas .
Example
<Country>UK & IRE</Country><CountryISO>GB</CountryISO><Region>EUR</Region><SalesCode>BTU</SalesCode><NbNetworkInfo>20</NbNetworkInfo>-<NetworkInfo><MCCMNC>23410</MCCMNC><NetworkName>O2 UK Pay Monthly</NetworkName></NetworkInfo>-<NetworkInfo><MCCMNC>23410</MCCMNC><NetworkName>O2 UK Pay & Go</NetworkName></NetworkInfo>-<NetworkInfo>
CSC code is part of the HDSWVER code that is used for Kies /Ota updates if anyone actually uses that route .
jje
raphaelmo said:
Well, after flashing some roms, I got this message right now (*#1234#)
AP: I9300UBALE6
CP: I9300UBLE6
CSC: unknown
This ROM is at my SG3: Samsumg Stock: I9300UBALE6 / CSC I9300ZTOALE7
And the original one was CSC I9300ZTAALE6.
Can you help me?
Click to expand...
Click to collapse
donalgodon said:
I have the same thing after the Polish ROM. Does having an unknown CSC actually matter for any reason?
Threads seem to indicate that it doesn't, and my phone is working normally, but maybe I'm missing something obvious.
Click to expand...
Click to collapse
You have corrupted CSC, Flash the rom again in Odin as CSC, i.e. put the MD5 file in CSC instead of PDA and it will fix the problem.
You have better reset your firmware by using "Firmware Upgrade And Initialization" in your Samsung KIES 2.5.0.12114_1.
You don't need a correct CSC for your phone as it will just download the firmware for you according to the serial number you provided to the software. However, please back up your phone first as it may delete all your data.
Is there a way to fix this WITHOUT resetting? I didn't encounter it until recently. I assume it's something related to using Mobile Odin, but not sure.
donalgodon said:
Is there a way to fix this WITHOUT resetting? I didn't encounter it until recently. I assume it's something related to using Mobile Odin, but not sure.
Click to expand...
Click to collapse
I am not sure about that. Maybe you just try to download the CSC corresponding to your firmware version and flash it with odin, but I don't know if it will reset your phone.
Anyone who really does know how to fix this (or if it is even necessary)?
I also had this problem. Reflashing the firmware again fix it for me.
Sent from my Galaxy Nexus using Tapatalk 2
Reflashed via desktop Odin, rooted via Chainfire's latest root method. Reset. Flashed CWM touch. Device status is Normal and CSC is correct.
Just for future reference, in case anyone searches for this later. This was the actual problem.
http://forum.xda-developers.com/showthread.php?t=1950082
Simply reflashing the ROM via Mobile Odin and allowing the stock recovery to be flashed solved it. Flash the CWM recovery later, if you want it.
Works like a charm.
Hi,
I am starting to developing on Android and i just got a used Galaxy S2 GT-9100 ( Canada ). This phone is rooted on an other firmware. I want to go back on the last official firmware in order to make Samsung Kies working. I really don't understand why when i look for official samsung firmware on google i finish on unknown blog ....
There is a way to get the last official Samsung Firmware ?
Thanks
Go to sammobile.com. register for free. Enter your device details. Download ROM. Flash it via Odin.
Sent from my GT-I9100 using Tapatalk 2
how to flash a sammoblie firmware file
Spiralzz said:
Go to sammobile.com. register for free. Enter your device details. Download ROM. Flash it via Odin.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Hello from me! My first post!!!
Well I was wandering how can I flash the sammobile dowloaded firmware with Odin3. I mean full flash so I can change the phone and CSC not only the pda. Because what I get from sammoblie is a one file bundle *.tar.md5 .
- Just in case, I recently bought from ebay a GT-9100 locked with T-Mobile and stocked with Gingerbread. I am not a customer of T-Mobile so I unlocked it and upgraded it to latest firmware 4.0.4
- The problem is the signal strength is very poor (but not always - sometimes, for about 10 minutes I might get full H+ and after that no signal (wtf)).
I am not sure whether it is a software or hardware fault and wanted to downgrade back to Gingerbread.
Any help is apreciated.
b4rdarian said:
Hello from me! My first post!!!
Well I was wandering how can I flash the sammobile dowloaded firmware with Odin3. I mean full flash so I can change the phone and CSC not only the pda. Because what I get from sammoblie is a one file bundle *.tar.md5 .
- Just in case, I recently bought from ebay a GT-9100 locked with T-Mobile and stocked with Gingerbread. I am not a customer of T-Mobile so I unlocked it and upgraded it to latest firmware 4.0.4
- The problem is the signal strength is very poor (but not always - sometimes, for about 10 minutes I might get full H+ and after that no signal (wtf)).
I am not sure whether it is a software or hardware fault and wanted to downgrade back to Gingerbread.
Any help is apreciated.
Click to expand...
Click to collapse
tar.md5 is complete rom with modem and csc togather using odin just place the tat file in pda and flash.
Cosmic Blue said:
tar.md5 is complete rom with modem and csc togather using odin just place the tat file in pda and flash.
Click to expand...
Click to collapse
Any idea on the second part of my problem?
Plus, when I flashed Gingerbread I got stuck in set up wizard due to errors. And I was not able to factory reset the phone.
b4rdarian said:
Hello from me! My first post!!!
Well I was wandering how can I flash the sammobile dowloaded firmware with Odin3. I mean full flash so I can change the phone and CSC not only the pda. Because what I get from sammoblie is a one file bundle *.tar.md5 .
- Just in case, I recently bought from ebay a GT-9100 locked with T-Mobile and stocked with Gingerbread. I am not a customer of T-Mobile so I unlocked it and upgraded it to latest firmware 4.0.4
<snip>
Click to expand...
Click to collapse
T-Mobile where? In Europe? Or the US?
ctomgee said:
T-Mobile where? In Europe? Or the US?
Click to expand...
Click to collapse
b4rdarian said:
Hello from me! My first post!!!
Well I was wandering how can I flash the sammobile dowloaded firmware with Odin3. I mean full flash so I can change the phone and CSC not only the pda. Because what I get from sammoblie is a one file bundle *.tar.md5 .
- Just in case, I recently bought from ebay a GT-9100 locked with T-Mobile and stocked with Gingerbread. I am not a customer of T-Mobile so I unlocked it and upgraded it to latest firmware 4.0.4
- The problem is the signal strength is very poor (but not always - sometimes, for about 10 minutes I might get full H+ and after that no signal (wtf)).
I am not sure whether it is a software or hardware fault and wanted to downgrade back to Gingerbread.
Any help is apreciated.
Click to expand...
Click to collapse
I have the exact same problem, UK, Tmobile/EE
Hello everybody. Yesterday it was released 4.1.2 ell4 base for Baltic region. I am from there, so I would like to have modem from that base. Maybe anyone know how to extract and get the modem? I have already downloaded that base. Or maybe anyone already have the modem separately? I want it because I have sometimes problems with place recognising or mobile internet connection.
extract from the tar and odin which ever modem you want.
xSpeced said:
extract from the tar and odin which ever modem you want.
Click to expand...
Click to collapse
which program should extract it? i dont know how to do it..
Here
http://forum.xda-developers.com/showthread.php?t=1740061
[REF] Galaxy S3 Modem / Radio Collection (I9300 & I9300T ONLY) CWM & Odin Flashable
what is the reason for having poor data connection? is it the modem?
iamnoo said:
what is the reason for having poor data connection? is it the modem?
Click to expand...
Click to collapse
More likely poor signal
Yesterday I updated my i9300 to android 4.3
Baseband version I9300BUUGMJ3
Build number JSS15J.I9300XXUGMJ9
..and since then I haven't had any reception. My imei number, serial number, and everything else is same and still there, but I just can't get it to get reception again... When I go to my Mobile Networks, it says registered on network, but again, no reception. Then I tried installing the modem BUUGMJ3 with odin which didn't work. What can help? Stock firmware? Please help.
Thanks in advance.
currently experiencing the same issue mate. I can't seem to find a workaround/solution for this -__-
Is that base band supposed to work in your country? Find an modem later than EMGx, without a RIL, for your country and install that to test.
boomboomer said:
Is that base band supposed to work in your country? Find an modem later than EMGx, without a RIL, for your country and install that to test.
Click to expand...
Click to collapse
I've probably made a big mistake there, no it's meant for mine country, it's for the county near mine, Croatia, but I read somewhere that this doesn't matter.. :/
And by 'later than EMGx' I'm not sure what you mean, but I've flashed EMG4 modem which didn't seem to work.
Found something about flashing a previous modem and restoring your EFS folder, but I do not have my EFS folder backed up - I forgot to.
A few days ago I paid about $30 for a repair on my phone, I don't really want to send it off for repairs again, I really wonder if there is an fix to this
Follow the guides in general forum, stickies on how to flash back to 4.1.2 stock rom. Make sure it's at least EMG4 base band.
boomboomer said:
Follow the guides in general forum, stickies on how to flash back to 4.1.2 stock rom. Make sure it's at least EMG4 base band.
Click to expand...
Click to collapse
Yeah, about that...
first of all, sorry for bugging you so much..
but I downloaded the right stock firmware for my country, I9300XXEMG4_I9300BHTEMH1_I9300XXEMG4, but after I flash it via odin when the phone turns on it gets stuck in a loop showing the Samsung logo repeatedly...
Edit:
Okay, I managed to install the stock firmware 4.1.2 but it still is showing 'Emergency calls only', the modem is xxemg4...
Delko said:
Yeah, about that...
first of all, sorry for bugging you so much..
but I downloaded the right stock firmware for my country, I9300XXEMG4_I9300BHTEMH1_I9300XXEMG4, but after I flash it via odin when the phone turns on it gets stuck in a loop showing the Samsung logo repeatedly...
Edit:
Okay, I managed to install the stock firmware 4.1.2 but it still is showing 'Emergency calls only', the modem is xxemg4...
Click to expand...
Click to collapse
how about your IMEI/Serial numbers? are they still the same before you downgrade and flashed the XEMG4 modem? mine are the same with SN/IMEI so I guess that's why it worked. I just took the risk cause I was really pissed experiencing the lag and the battery drain in 4.3.
Do factory reset from settings option in touch wiz, make sure the imei and serial number match the label under your battery.
If still no good then try another SIM in your phone, final steps would be restore efs backup then repair centre.
thehavoc said:
how about your IMEI/Serial numbers? are they still the same before you downgrade and flashed the XEMG4 modem? mine are the same with SN/IMEI so I guess that's why it worked. I just took the risk cause I was really pissed experiencing the lag and the battery drain in 4.3.
Click to expand...
Click to collapse
Well it's all the same as it used to be. Could it be that the modem I had before EMG4 changed the format of my efs folder?
boomboomer said:
Do factory reset from settings option in touch wiz, make sure the imei and serial number match the label under your battery.
If still no good then try another SIM in your phone, final steps would be restore efs backup then repair centre.
Click to expand...
Click to collapse
Did a factory reset, imei, s/n same.
Android 4.1.2 EMG4 modem still no reception.
It seems that MGX modem has change ur IMEI from /efs1 to /efs2. MGX modem seems to support only 4.3 roms (due to some security issue).
It is not recommended,but u could flash an older rom with modem (get from www.sammobile.com) then restore an efs backup (if u did some) from /efs2 to /efs1
Sent from my GT-I9300 using xda app-developers app
Samsung Galaxy S3 i9300 "not Registered on Network" after 4.3 I9300XXUGMJ9 Update
I recently installed 4.3-official-I9300XXUGMJ9 on my Samsung Galaxy S3 (i9300) and everything went fine. I was upgrading from 4.1.2 but now I am facing “Not Registered on network” Issue. I tried Arzia Patch, tried falshing Modems (I9300XXLG8 and BUUGMJ3 ) nothing Works.
FYI: My serial Kay or IMEI is not 0000 they are fine.
Here’s the list from Setting->About Device->Status<br>
Network: unknown<br>
Service State: Out of service<br>
Mobile Network State: disconnected<br>
Device Status: Official
Also My Sim works fine in other Phones. Any help will be greatly appriciated.
dmarkweb said:
I recently installed 4.3-official-I9300XXUGMJ9 on my Samsung Galaxy S3 (i9300) and everything went fine. I was upgrading from 4.1.2 but now I am facing “Not Registered on network” Issue. I tried Arzia Patch, tried falshing Modems (I9300XXLG8 and BUUGMJ3 ) nothing Works.
FYI: My serial Kay or IMEI is not 0000 they are fine.
Here’s the list from Setting->About Device->Status<br>
Network: unknown<br>
Service State: Out of service<br>
Mobile Network State: disconnected<br>
Device Status: Official
Also My Sim works fine in other Phones. Any help will be greatly appriciated.
Click to expand...
Click to collapse
Ariza patch only works on older modems (efs v1 modems). So, that wont help.
You said you flashed the zuluman modems but.... did you flash the patched kernels too? You need the patched kernels for the patched modems to work. I don't know why, but that's what zuluman says (according to him, the kernel has a modem signature check and it wont work if the modem was modified).
Gonzakpo said:
Ariza patch only works on older modems (efs v1 modems). So, that wont help.
You said you flashed the zuluman modems but.... did you flash the patched kernels too? You need the patched kernels for the patched modems to work. I don't know why, but that's what zuluman says (according to him, the kernel has a modem signature check and it wont work if the modem was modified).
Click to expand...
Click to collapse
Sorry didn't tried flashing kernal. since I didn't find that file, because wasn't available for download. can you help me find a combination of Modem+kernal??
Thanks
dmarkweb said:
Sorry didn't tried flashing kernal. since I didn't find that file, because wasn't available for download. can you help me find a combination of Modem+kernal??
Thanks
Click to expand...
Click to collapse
Here are all the patched modems and kernels made by zuluman.
https://drive.google.com/folderview...&usp=sharing&tid=0B6MIUd7HJudAbU5YaGkzOUowMG8
In my opinion you should flash the latest official firmware and download the appropiate modem and kernel from that google drive.
You can download the latest official firmware from the general section of this forum.
Good luck.
Remember to always have an efs backup!
Great thanks!
Gonzakpo said:
Here are all the patched modems and kernels made by zuluman.
https://drive.google.com/folderview...&usp=sharing&tid=0B6MIUd7HJudAbU5YaGkzOUowMG8
In my opinion you should flash the latest official firmware and download the appropiate modem and kernel from that google drive.
You can download the latest official firmware from the general section of this forum.
Good luck.
Remember to always have an efs backup!
Click to expand...
Click to collapse
Flashing the Modem + Kernal after rooting the Phone works for me. I have flashed it using CWM.
Thanks once again.
the same problem with signal
hello,
i've the same problems with my s3. i flashed it OTA to Android 4.3
After this i had no signal. ...
When i found this thread i was so happy. BUT!!!
i downloaded all the modem and kernel files from the google drive and wanted to flash them (Patched_XXUGMK6_xxx.zip) with cwm recovery (latest version).
whenever i want to do this, i get the following message and the update aborts: "E:Can't copy META-INF/com/google/android/update-binary"
what can i do? Can i flash them with odin, too? Or does anybody have another idea?
here are some Infos about my Phone:
Android-Version: 4.3
Baseband: I9300XXUGMK6
Kernel: 3.0.31-2191747
[email protected] #1
Tue Nov 26 16:57:12 KST 2013
Build: JSS15J.I9300XXUGMK6
hmm...
can nobody help me? ...
sorry for spamming, but i've got a problem without a phone
greetz,
Carpe.
You said your imei & serial is ok but you cannot register to network. Have you paid your bills?
But if it's corrupted serial number.
Try this guide.
thx for your answer.
Payed my bills? ... uuuuuups!
back to topic: i've flashed my phone back to 4.1.2 for the moment. Network seems to work. ... i'll try some things and give a feedback here. ...
You have to flash an Android 4.3 modem for it to work I think but as your on 4.1.2 now I guess it doesn't matter anymore
Sent from my GT-I9300 using Tapatalk
Good day, my Samsung S3 gave the Not Registered on Network problem a few weeks back, before the error i did install a custom rom but did follow the instructions accordingly and it worked fine and i could still make and receive calls and texts the problem only accured a few weeks after the custom rom, then i tried installing the official rom back on but the Not Registered on Network was still there i did try the fix with Azura Patch and installing the modem files but didn't work i can't accses my Product code using the *2767*4387264636# or any thing on the dailpad, what else can i do i am currently on the official I9300XXUGNA8 and residing in South Africa, my phone was a Vodafone because when i started the phone their logo would show but it doesn't any more
Android Version 4.3
Baseband Version I9300XXUGNA8
Network: Unknown
Service State: Out of service (There is 3G coverage in my area)
Mobile Network state: Disconnected
My IMEI number correspond on my device at the back and on the settings/About Device/Status
Thank you in Advance for your trouble.
Restore the efs backup you made before you first flashed, no backup then pay for a repair.
boomboomer said:
Restore the efs backup you made before you first flashed, no backup then pay for a repair.
Click to expand...
Click to collapse
Good day thx for your reply, i didn't make a efs backup, but i did read about it just now, but i made a few mistakes on my original post i forgot to insert a sim card so it does show Network RSA Cell C, and my IMEI number is correct, so what can i do to repair it myself, there isn't a repair shop that can do this kind of thing my only other option is to send it in and that would cost a small fortune.
Thank you
Try installing a patched modem and kernel together, if that doesn't work then you are stuck, sorry.
boomboomer said:
Try installing a patched modem and kernel together, if that doesn't work then you are stuck, sorry.
Click to expand...
Click to collapse
Thx again for quick reply my base band version is I9300XXUGNA8 i am in south africa where can i find kernel and modem files for this version or would any do can i try to download the previous version of the official firmware android 4.1.1 and then use the ariza patch because if i try to use the patch and it installs and i try to apply the patch V[0.6] it stays by 0\100 and doesn't download any further
Search xda, there is a thread for them.
Andr0id1o1 said:
Thx again for quick reply my base band version is I9300XXUGNA8 i am in south africa where can i find kernel and modem files for this version or would any do can i try to download the previous version of the official firmware android 4.1.1 and then use the ariza patch because if i try to use the patch and it installs and i try to apply the patch V[0.6] it stays by 0\100 and doesn't download any further
Click to expand...
Click to collapse
list the problem man like
1 do you have network
2 is your imei no same as written in the back
3 is you phone carrier flagship
jasi275 said:
list the problem man like
1 do you have network
2 is your imei no same as written in the back
3 is you phone carrier flagship
Click to expand...
Click to collapse
He answered already that he has IMEI.
Andr0id1o1 said:
Thx again for quick reply my base band version is I9300XXUGNA8 i am in south africa where can i find kernel and modem files for this version or would any do can i try to download the previous version of the official firmware android 4.1.1 and then use the ariza patch because if i try to use the patch and it installs and i try to apply the patch V[0.6] it stays by 0\100 and doesn't download any further
Click to expand...
Click to collapse
Don't apply ariza, you will lose IMEI, it is meant for 4.1.2 not 4.3 android.
Flash Boeffla kernel and then this patched modem. [MODEM]
You can install boeffla via CWM (cwm.zip) or via odin (tar.md5), if you have cwm, install via it, and then install patched modem also.
Thx for the info, one thing i cant download the modem file tried using chrome and IE but said this webpage is not available.