[Q] Cubot GT72E - bricked (I have backup) - Android Q&A, Help & Troubleshooting

Hello dear friends,
The phone was using by my uncle and It don't have Turkish language opion.
I made a backup on MTK Droid Tools(The phone has MTK6572), later i tried to flash stock rom.
Rom made phone hard brick directly, I'm trying to flash my backup but flashtool says "BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)".
So, what should i do for this phone?
Can anyone help me?

mehmetcanekinci said:
Hello dear friends,
The phone was using by my uncle and It don't have Turkish language opion.
I made a backup on MTK Droid Tools(The phone has MTK6572), later i tried to flash stock rom.
Rom made phone hard brick directly, I'm trying to flash my backup but flashtool says "BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)".
So, what should i do for this phone?
Can anyone help me?
Click to expand...
Click to collapse
First try To format the Flash from SPflash tools..
But don't. Format the Bootloader.
Then download the backed up rom..

abhinavp649 said:
First try To format the Flash from SPflash tools..
But don't. Format the Bootloader.
Then download the backed up rom..
Click to expand...
Click to collapse
When i try make format, this error shown;
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

mehmetcanekinci said:
When i try make format, this error shown;
Click to expand...
Click to collapse
Are you flashing your phone with battery or without battery..
Try pressing volume + or volume - while starting download.
Probably the error is occurred because the files are not matching with your device.

abhinavp649 said:
Are you flashing your phone with battery or without battery..
Try pressing volume + or volume - while starting download.
Probably the error is occurred because the files are not matching with your device.
Click to expand...
Click to collapse
I tried with battery&without battery, still same, I tried with + and - button and both of them with and without battery but still same, really i don't know what should i do. This phone belongs my uncle and I broke it, he is too angry to me, I really need your help

mehmetcanekinci said:
I tried with battery&without battery, still same, I tried with + and - button and both of them with and without battery but still same, really i don't know what should i do. This phone belongs my uncle and I broke it, he is too angry to me, I really need your help
Click to expand...
Click to collapse
refer to this link: http://www.techulk.com/2014/01/sp-tools-dram-error-fixed-finally-heya.html
it contains the fix for the issue u r facing.
cheers!

Related

[Q] Boot failure

Hello,
I have a big probleme ! I tryed to instal a rom with recovery but, the installation failed and the screen is stuck on the motorola logo
I tryed to installing fastboot file EU (GSM) with RSD lite but after flashing I have this at boot :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tryed several time to reinstal fastboot file but it's the same problem.
Thanks to your help
I use GSM EU Razr.
Hi,
i`ll send you an PN with a boot image to flash. (can`t post links cause i`m an new member)
After this your system should boot normally.
Wiplex said:
Hi,
i`ll send you an PN with a boot image to flash. (can`t post links cause i`m an new member)
After this your system should boot normally.
Click to expand...
Click to collapse
Can you help me out too? I'm exactly in the same poopoo as Eagledig. Thanks in advance!
Could i be that i can`t send PN`s an a new member?
Hm try this, simply flash it via RSD:
mediafire.com/?kovmm4bv4l4ge5v
Wiplex said:
Could i be that i can`t send PN`s an a new member?
Hm try this, simply flash it via RSD:
mediafire.com/?kovmm4bv4l4ge5v
Click to expand...
Click to collapse
Can I flash this file on whichever rom I'm on?
UH Oh battery low... Try this http://forum.xda-developers.com/showthread.php?t=1403100
Make sure you have the correct ROM for you phone. I had this issue kinda, was stuck at the screen, with less errors though. Perhaps the link below will help, it is my experience that RSD lite can be trying to install the correct ROM but still giving errors for some reason and a more manual approach is needed... for some reason.
http://forum.xda-developers.com/showthread.php?t=1453660
I did not use this method, but just used fastboot to flash the individual partitions located in the ".xml" file in the FSB ROM file. Which is basically what the script in the link above does for you.
I have the same problem
What should i do?
I got only the ap fast boot failure
drolgnir said:
UH Oh battery low... Try this http://forum.xda-developers.com/showthread.php?t=1403100
Make sure you have the correct ROM for you phone. I had this issue kinda, was stuck at the screen, with less errors though. Perhaps the link below will help, it is my experience that RSD lite can be trying to install the correct ROM but still giving errors for some reason and a more manual approach is needed... for some reason.
http://forum.xda-developers.com/showthread.php?t=1453660
I did not use this method, but just used fastboot to flash the individual partitions located in the ".xml" file in the FSB ROM file. Which is basically what the script in the link above does for you.
Click to expand...
Click to collapse
Yes..................................definitely get the battery charged and try different ROM. MattGroff's utility 1.7 worked for me to upgrade my rooted GB to ICS.
What is your original rom? Did you install the motorola drivers?
Sent from my XT910 using xda premium

emergency!!! Experts, please help me....

I am venkatesh, and i am using xperia mini pro, unlocked bootloader..
Today, i got strange problem..
I tried to install custom rom via cwm. It shows some error while installing and not installed any os...Then my sd card was shown error while connecting to laptop, then my card doesn't work properly, it almost in dead condition..
So, i just thought to lock the bootloader for the purpose of flashing ftf original firmware...then the flashtool shows error "ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
I don't know the way to give life to my phone...I can able to change kernal, i tried to restore some os via panic kernal, but SD card not shown..
You don't need to relock bootloader to flash the original ftf. Just try again flashing the firmware ftf. But be sure it is the right one for your device.
If it still doesn't work, check the option "no final verification" when you select the firmware. But be sure it's the right one for your device, or your phone will completely brick!!
Sent from my SK17i running Jelly Bean via CM10
mihahn said:
You don't need to relock bootloader to flash the original ftf. Just try again flashing the firmware ftf. But be sure it is the right one for your device.
If it still doesn't work, check the option "no final verification" when you select the firmware. But be sure it's the right one for your device, or your phone will completely brick!!
Sent from my SK17i running Jelly Bean via CM10
Click to expand...
Click to collapse
Hi, mihahn......
I tried almost many ftf firmwares, all things shows "ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";E RR_DYNAMIC="SIN header verification failed"
What can i do, if the phone is bricked like this....
Now, i tried to flash very old firmware, then the flash tool like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​
Umm, that error only occurs with the final data verification check turned on. But, in your case that's a preety peculiar bug. Sorry.
prime_225 said:
Umm, that error only occurs with the final data verification check turned on. But, in your case that's a preety peculiar bug. Sorry.
Click to expand...
Click to collapse
hi mihahn and prime_225...
Dudes, my problem is solved now.....I flash successfully....
The main problem is, my 16gb dead while installing custom rom.... so , every thing collapsed, got panic..
I observe that, official sd cards(free 2gb) doesn't show in clock work mode....Now, i got spare of 2gb and installed octane successfully...
Thank you guys....

[Q] MT6589 hard bricked.

So guys, Im new in this forum.
And just wanted to mention that Im a noob in programming.
I have a little issue with my phone. It is an iOcean X7 Elite with MT6589 progressor.
After getting bored with stock andriod I wanted to test the MIUI os and flashed it to my phone. It worked fine, but i didn't like the the rom that much and wanted to flash back to stock. I downloaded the stock rom for my Phone and flashed it with SP Flashtool. It finished without any error.
But the won't turn on. It wont even show the bootlogo. My PC does not recognize the Phone as a Phone.It says: Unknown USB device.
I have tried installing the drivers and used several flashtools (i case there is a version out there getting the job done).
Im really frustrated.
Last time I had a simmilar problem my phone showed the bootlogo and got stucked. But i got it to work by flashing. Now I have no idea what to do.
I'm already thankful for your help.
Was the backup your own?
Try to flash only the preloader, then if that goes thru you can do the full restore again... Come to think about it you might need diff drivers, or maybe meta mode (-vol and power)
I'm not at the computer atm sorry I can't be more help
-D
Sent from my STUDIO 5.5 using XDA Free mobile app
Well, it always stopps at this point. No matter what i try to flash.
What are diff drivers?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Well it's being recognized so it's not a driver issue.
Is that your backup?
Do you have a backup?
Your not getting any errors?
Sent from my STUDIO 5.5 using XDA Free mobile app
Have no backup.
It just breaks up the process when reaching the 100% of the red bar.
From time to time I get the drivers issue error. Nothing more.
okay guys.
i tried an other stock rom version and now it says:
"BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)"
Does anybody know what this means?
Thanks a lot for minding.
I think just do the full flash.
And DO NOT CONNECT your phone until the progress bar have passed the violet colored progress bar.

my mega not booting

guys i tryed to root my device first i used a local turkish site and succesfully installed recovert but it didnt installed supersu. it said veritifaction failed or something like that idk.
then i saw this on here
http://forum.xda-developers.com/showthread.php?t=2355680
well it says supersu comes with it so i tryed to flash this. now my device not booting but i can reach download mode.
what i must do?
here is what happened:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
well it was a quick shot from my note 4 but still explains the problem. phone stays like this with blue led flashing after i heard samsung boot sound. i tryed to flash old recovert first i used but it also didnt worked.
update: i cant reach recovery...
First try to take out battery for some time and try to boot again. If not successfully what about download mode? If you can't boot and can't go to recovery your only option is to flash stock ROM by Odin using download mode. Then you can flash recovery and restore your backup (if you have one).
trurl3 said:
First try to take out battery for some time and try to boot again. If not successfully what about download mode? If you can't boot and can't go to recovery your only option is to flash stock ROM by Odin using download mode. Then you can flash recovery and restore your backup (if you have one).
Click to expand...
Click to collapse
well i already tryed battery trick. i found stock rom (1.3gb from internet) downloading now. if i flash that will it fix it?
and no i dont have a backup
Be absolutly sure so downloaded ROM is suitable for your model - one of trusted sources of stock ROMs for Samsung phones is there: http://www.sammobile.com/firmwares/
If you choose proper ROM, after flashing it you will get brand new system on your Mega - flashing ROM by Odin superseed all what you have now in your unit. Of course all your data will be lost.
trurl3 said:
Be absolutly sure so downloaded ROM is suitable for your model - one of trusted sources of stock ROMs for Samsung phones is there: http://www.sammobile.com/firmwares/
If you choose proper ROM, after flashing it you will get brand new system on your Mega - flashing ROM by Odin superseed all what you have now in your unit. Of course all your data will be lost.
Click to expand...
Click to collapse
thx for help dude i fixed it.
there is 3 different model in turkey i found the correct one.
but i was scared when first one didnt worked

after use format option phone dont power on help plx

hi guys, i used accidently the option format of the sp flash tool and now my phone dont power on
what i have to do?
Huirll said:
hi guys, i used accidently the option format of the sp flash tool and now my phone dont power on
what i have to do?
Click to expand...
Click to collapse
First try to power on your android in meta mode by volume up/volume down and power key. Download stock rom of your android and try to flash with sp flash tool.
Ashwinrg said:
First try to power on your android in meta mode by volume up/volume down and power key. Download stock rom of your android and try to flash with sp flash tool.
Click to expand...
Click to collapse
None of this options work, when i try to flash i got a error and the meta mode when i try to go to the mode nothing happens
Huirll said:
None of this options work, when i try to flash i got a error and the meta mode when i try to go to the mode nothing happens
Click to expand...
Click to collapse
You need to reflash the phone using the sp flash tool itself with the stock firmware of your phone
DON'T USE THE FORMAT OPTION UNLESS YOU KNOW WHAT YOU ARE DOING.
Expect to have a null imei and you will have to rewrite it using root if you want it to stay there permanently.
-Hope- said:
You need to reflash the phone using the sp flash tool itself with the stock firmware of your phone
DON'T USE THE FORMAT OPTION UNLESS YOU KNOW WHAT YOU ARE DOING.
Expect to have a null imei and you will have to rewrite it using root if you want it to stay there permanently.
Click to expand...
Click to collapse
yes, but i got a error when i try to flash the firmware :/
Huirll said:
yes, but i got a error when i try to flash the firmware :/
Click to expand...
Click to collapse
what error please be specific
-Hope- said:
what error please be specific
Click to expand...
Click to collapse
this error
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://bit.ly/2xNexo4
plx help

Categories

Resources