[Kernel] [CM-11.0] YU MSM8916 Update Build [2015-02-14] - YU Yureka Android Development

Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research if
* you have any concerns about features included in this ROM before flashing it!
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
IMP Node: As mentioned by Kiran Anto here this kernel has latest camera driver which is not suitable for Stock OS. So be carefull, if you are on Stock ROM.
Please don't just leech the files and go away. You can easily say thanks just by pressing "Thanks" button.
Download:
boot.img - 6.07 MB
boot.img - 6.07 MB Kernel with added Conservative Governor. Tested only with Carbon ROM on Yureka.
How to update:
Download above boot.img file.
Go to downloaded file location.
Then flash your kernel (boot.img) using following command.
Code:
sudo fastboot -i 0x1ebf flash boot boot.img
If unable to flash then make sure bootloder of your yureka is unlocked.
Note: Build with latest commits from https://github.com/CyanogenMod/android_kernel_yu_msm8916
Created 2015-02-14
Last Build 2015-02-14

:good::good:

Is this kernel compatible to flash with stock cyanogen? or need unofficial cm build? pls confirm

spikywits said:
Is this kernel compatible to flash with stock cyanogen? or need unofficial cm build? pls confirm
Click to expand...
Click to collapse
I have not tested on Stock OS. Working fine with CM build http://forum.xda-developers.com/yureka/development/cm-11-0-cyanogenmod-rom-t3021713
I need any tester to test it on Stock OS.
Since Stock OS has kernel source forked from cyanogenmod kernel source,
i think it will work on stock OS too.
Do remember currently stock branch is 10 commits behind CyanogenMod:cm-11.0 as far as android_kernel_yu_msm8916 is concerned.

Camera is not supported in this kernel... Please rectify it....

Kiran Anto said:
Camera is not supported in this kernel... Please rectify it....
Click to expand...
Click to collapse
Camera working fine in CM build ROM. Tested front and back camera with and without flash.
Even in low light good snap.
Which ROM you in, is it stock rom.

I'm using stock cm11... With update.. I tried launching cyanogen camera.. Then Google can... Then retrica.. None of them worked...

Kiran Anto said:
I'm using stock cm11... With update.. I tried launching cyanogen camera.. Then Google can... Then retrica.. None of them worked...
Click to expand...
Click to collapse
flash the stock kernel and check.
current cyanogenmod kernel has latest commits for camera, which is not incorporated in stock rom.
May be next build of stock ROM will solve it.

In stock its working fine....... I think its because they removed drivers.....dunno... Not suitable for stock ROM anyways...

Kiran Anto said:
In stock its working fine....... I think its because they removed drivers.....dunno... Not suitable for stock ROM anyways...
Click to expand...
Click to collapse
yes... they have removed the old driver & added new one. That may be the reason.

Camera not working in the stock rom... Will flash it with your CM build and update in this thread..
Update:- The kernel is working fine with your CM build and there isn't any fc in the camera app.
And in the stock rom I was experiencing random reboots every now and then but in your build the random reboots are too less..

snoopnoob said:
Camera not working in the stock rom... Will flash it with your CM build and update in this thread..
Update:- The kernel is working fine with your CM build and there isn't any fc in the camera app.
And in the stock rom I was experiencing random reboots every now and then but in your build the random reboots are too less..
Click to expand...
Click to collapse
@Kiran Anto @snoopnoob @dumtara
Obviously camera wont work if you flash this kernel on stock CM11 cause @dumtara uses latest kernel commits with support for IMX214 sensor and IMX135 sensor support is removed and stock shipping cm11 uses old old commits ie old camera libs IMX135
Here is the diff : STOCK - Latest
@dumtara THE FIX for camera - just make a flashable camera patch with all these new libs and camera should be working
https://github.com/TheMuppets/proprietary_vendor_yu/commit/d1dc059107040c97b0432bd41c7b6277a41516e9
https://github.com/TheMuppets/proprietary_vendor_yu/commit/718897ef84996ed4a4d883130115a8c6d40bbb82
https://github.com/TheMuppets/proprietary_vendor_yu/commit/4223efae51c3e80dff5b12481c6715eb4566083e

Deleted
Thanx

can you please make a flashable zip for the lib files.. so that i can use your kernel in my stock rom...

Kiran Anto said:
can you please make a flashable zip for the lib files.. so that i can use your kernel in my stock rom...
Click to expand...
Click to collapse
I will try.... need some time as i am working on carbon rom right now.

dumtara said:
I will try.... need some time as i am working on carbon rom right now.
Click to expand...
Click to collapse
your working on carbon rom ??
cheers dude carbon rom is one of the best roms atleast for me .
thanks dude .
keep it up bro .

freakzapster said:
your working on carbon rom ??
cheers dude carbon rom is one of the best roms atleast for me .
thanks dude .
keep it up bro .
Click to expand...
Click to collapse
published now here http://forum.xda-developers.com/yureka/orig-development/carbon-kk-unofficial-20150215-t3031245
Test it & post review.

Dude please modify this kernel to work on the stock rom if possible . Give us a flashable zip

Nishchay1 said:
Dude please modify this kernel to work on the stock rom if possible . Give us a flashable zip
Click to expand...
Click to collapse
done. making a thread. will update time to time.

Sudeep Duhoon said:
done. making a thread. will update time to time.
Click to expand...
Click to collapse
The thread is going live NOW ??!

Related

[ROM] [4.4.4 KitKat ] CleanROM for GT-N5100

Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Introduction
This is the official N5100XXDNL5 KitKat v4.4.4 (Poland Version) from Samsung for GT-N5100
Click to expand...
Click to collapse
Features
Rooted
Busybox
Odexed
Knox Removed
Click to expand...
Click to collapse
Requirements
GT-N5100
PhilZ / TWRP recovery, I am using PhilZ recovery 6.48.4
Kitkat Bootloader (v1.0 only)
Click to expand...
Click to collapse
Installation
Backup your device, in case you wanted to revert back.
Wipe Data/Factory Reset in recovery.
Flash the ROM
Flash SD-Card-Fix.zip (Required on both v1.0 and v1.1 )
Reboot
Click to expand...
Click to collapse
Downloads
SD-Card-Permission-Fix
SD-Card-Fix.zip
v1.1
N5100XXDNL5_Stock_Rooted_Odexed_v1.1.zip
MD5: 422957c6b347a9766d382cedd75828e8
v1.0
N5100XXDNL5_Stock_Rooted_Odexed_v1.0.zip
MD5: 8F39868A16BEAA94B91E83C7C0925C12
Click to expand...
Click to collapse
Credits
I would like to Thank:
@Chainfire for providing us with SuperSU :good:
@JustArchi for providing us with Android Kitchen :good:
@Lord Boeffla and @ZaneZam for the Awesome Kernel supporting 4.4.4 KitKat :good:
@civato for GT-N51XX-MALI-Driver-KitKat-FIX :good:
XDA:DevDB Information
CleanROM-GT-N5100-KitKat, ROM for the Samsung Galaxy Note 8.0
Contributors
pvsgh
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
ROM Firmware Required: GT-N5100, Kitkat Bootloader (v1.0 only)
Version Information
Status: Stable
Current Stable Version: 1.1
Stable Release Date: 2015-02-06
Created 2015-01-27
Last Updated 2015-02-09
Changelog
Changelog
v1.1
Added Boeffla Kernel v2.1
To configure the Kernel, you would need to download Boeffla-Config App V2 from @Lord Boeffla's website:
http://www.boeffla-kernel.de/
Added N51xx Mali Driver Fix
Click to expand...
Click to collapse
Reserved
Fixies and?
Hi, I wanna flash the update but firstly i wanna know if it possible, what this update include, it will fix something or not?
Thank you so much!
Thank you.
I will try.
Any improvements over 4.4.2?
please help me---how abt custom kernal and xposed support
please help me///how abt custom kernal and xposed support
i using zanezam boeffla kernel. its awesome .so want to make it work with that...is der any mali driver updates
princedevilin said:
please help me///how abt custom kernal and xposed support
i using zanezam boeffla kernel. its awesome .so want to make it work with that...is der any mali driver updates
Click to expand...
Click to collapse
Xposed works, just install it as a normal app.
I have been trying to get the kernel working but no luck yet. Probably we need an updated kernel for 4.4.4
Megamind08 said:
Any improvements over 4.4.2?
Click to expand...
Click to collapse
DiegoDallaBattista said:
Hi, I wanna flash the update but firstly i wanna know if it possible, what this update include, it will fix something or not?
Thank you so much!
Click to expand...
Click to collapse
There might be some performance improvements but no UI changes.
ok then i will wait till kernel is fixed..thanks again..will follow the post ..and keep it updated..
Battery life is worst even after removing all that bloatware. 25% in an hour,, while Civz flex note was droping only 15%. Nice update. I can se some improvements like (Gallery app is now more faster and icons are updated for some apps. And some changes in settings section). But Battery life disappointed me.
Megamind08 said:
Battery life is worst even after removing all that bloatware. 25% in an hour,, while Civz flex note was droping only 15%. Nice update. I can se some improvements like (Gallery app is now more faster and icons are updated for some apps. And some changes in settings section). But Battery life disappointed me.
Click to expand...
Click to collapse
Please remember this is stock ROM with just root added. Battery life depends a lot on kernel, I haven't been able to get working Civz kernel on this yet.
i heard mali driver is updated
that may be the reason for the kernel issues.. im not an expert..
Anyone else can tell something about battery life? Will the Rom boot with the old Jelly Bean bootloader? Thanks
princedevilin said:
that may be the reason for the kernel issues.. im not an expert..
Click to expand...
Click to collapse
Yea, i read somewhere in civato's thread updating the mali driver make the device boot correctly.
gabripranzo said:
Anyone else can tell something about battery life? Will the Rom boot with the old Jelly Bean bootloader? Thanks
Click to expand...
Click to collapse
I'm using it since yesterday and it works great.
Battery life is correct for me. But I have to test it a coupple of days.
Greatins
Mr.201 said:
Yea, i read somewhere in civato's thread updating the mali driver make the device boot correctly.
Click to expand...
Click to collapse
Civato's "GT-N51XX-MALI-Driver-KitKat-FIX" only work for 4.4.2
Another thing I noticed that keyboard predictive text is not working.
Megamind08 said:
Another thing I noticed that keyboard predictive text is not working.
Click to expand...
Click to collapse
No changes made for Keyboard, did you check the setting for keyboard? You might need to enable certain setting based on your requirement.
I personally uses Swype keyboard.
pvsgh said:
Please remember this is stock ROM with just root added. Battery life depends a lot on kernel, I haven't been able to get working Civz kernel on this yet.
Click to expand...
Click to collapse
Boeffla kernel for 4.4.4 has just been released

[ROM][UNOFFICIAL] CM11 Stagefright fix [LG G3 D855][Aug/12/15]

Disclaimer
Code:
/*
* Your warranty is void if you flash this ROM.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications solely on your own, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
I've compiled this ROM for myself because I use Xposed and I like CyanogenMod.
I'm using it as a secondary ROM via MultiROM mod by @Skin1980 http://forum.xda-developers.com/lg-g3/development/mod-multirom-t2995047 . The ROM is bumped and at least one user using it says it works as only ROM (no dual Boot recovery).
There is a high possibility I'll continue to update the ROM, probably on a weekly basis, if there are updates from CyanogenMod team and while Xposed on CM12 is still immature.
Thank you for source code @invisiblek (https://github.com/invisiblek)
Thank you for guide on building @Raum1807 (http://forum.xda-developers.com/nexus-4/general/guide-cm11-how-to-build-cyanogenmod-11-t2515305
)
Thank you for original manifest @Skin1980 (https://github.com/Skin1980/local_manifests)
Thank you for directions on compilation errors @Ferindel
Kernel and ROM sources are pulled from git://github.com/CyanogenMod/ , there are no modifications of the source code by myself, only a single bug fix.
Downloads are in the 2nd post.
Bugs
screen sometimes doesn't wake up during calls
fixed since 20150224 build​
Stagefright vulnerability
fixed since 20150812 build​
you tell me (provide a logcat)...
XDA:DevDB Information
CyanogenMod 11 - Unofficial CM11 LG G3, ROM for the LG G3
Contributors
Galaid, invisiblek, Ferindel
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Testing
Created 2015-02-10
Last Updated 2015-08-17
Reserved
Downloads here (visible in 2015 Theme):
http://forum.xda-developers.com/devdb/project/?id=8177&styleid=21#downloads
Changelog:
20150812
- Stagefright vulnerability fixed
20150629
- official and final CM commits (http://www.cyanogenmod.org/blog/releases-11-12-final)
20150505
- official CM commits (http://www.cmxlog.com/11/vs980/)
20150324 (stable release)
- official CM commits (http://www.cmxlog.com/11/vs980/)
20150305
- oversharpening fix integrated (no sharpening)
- raised volume levels (commit: https://github.com/CyanogenMod/andr...mmit/c7285d4e42b130746fb1dacca5d9d713847aa6fb)
- changed default dpi to 540
- official CM commits (http://www.cmxlog.com/11/vs980/) up to cm-11-20150302-NIGHTLY-vs980.zip + 3 newer.
20150224
- "Proximity not waking the phone during call" bug fixed in 20150224 release.
Krhmm, Where download ?
Eagle-no1 said:
Krhmm, Where download ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/devdb/project/?id=8177&styleid=21#downloads
Visible in 2015 xda Theme
Galaid said:
http://forum.xda-developers.com/devdb/project/?id=8177&styleid=21#downloads
Visible in 2015 xda Theme
Click to expand...
Click to collapse
Thanks, i use 2013 theme.
so we get again support for kitkat? awesome!!! thnx
is it similar to cm11s?
I mean is it stable and has lots of themes and customization and great camera ( stock kitkat camera is superb )!
Thanks dude, will test it now!
Thank god that someone will keep this awesome ROM alive!
Cannot boot up. I believe the kernel is not bumped.
Edit: back to work.. I bumped the boot.img
keaheng said:
Cannot boot up. I believe the kernel is not bumped.
Edit: back to work.. I bumped the boot.img
Click to expand...
Click to collapse
You're right, I didn't bother bumping as I'm running it as a secondary ROM on my device. Will test bumped ROM in multirom...
Galaid said:
You're right, I didn't bother bumping as I'm running it as a secondary ROM on my device. Will test bumped ROM in multirom...
Click to expand...
Click to collapse
May you please upload a bumped version?
johnpat said:
May you please upload a bumped version?
Click to expand...
Click to collapse
I'm uploading BUMPed version, will be in the Downloads tab in 10mins or so. Please note that I flashed this zip for test as a secondary ROM in my MultiROM environment so flash at your RISK. I used open_bump.py so I guess it would work.
Edit: bumped version is up. Please tell me how it went
baf8385a10f51de6d99ba68a56b9155d cm-11-20150203-UNOFFICIAL-d855-BUMPED-galaid.zip
emerald123 said:
I mean is it stable and has lots of themes and customization and great camera ( stock kitkat camera is superb )!
Click to expand...
Click to collapse
I use it as my daily ROM after using stock 4.4 for 3 months. For me it's not less stable than stock. This is pure CM ROM ported to D855 as CM team never released official CM11 for LG G3 International.
Galaid said:
I use it as my daily ROM after using stock 4.4 for 3 months. For me it's not less stable than stock. This is pure CM ROM ported to D855 as CM team never released official CM11 for LG G3 International.
Click to expand...
Click to collapse
Any bug discovered ATM?
Sent from my Nexus 10 using XDA Free mobile app
I've been using the rom as primary one (after bumping boot.img) and so far so good.
Excelent smoothness, no bugs so far, themes working fine.
Thanks.
Galaid said:
I use it as my daily ROM after using stock 4.4 for 3 months. For me it's not less stable than stock. This is pure CM ROM ported to D855 as CM team never released official CM11 for LG G3 International.
Click to expand...
Click to collapse
DPI are too high, bit i can downscale it. But, please, oversharpening kills me.
This ROM is fantastic but.. Oversharpening annoying.
bumped cm11 stable rom
Can somebody share me the bumped kitkat rom download link which will install fine with twrp?
I am on CLOUDY kitkat rom right now...
emerald123 said:
Can somebody share me the bumped kitkat rom download link which will install fine with twrp?
I am on CLOUDY kitkat rom right now...
Click to expand...
Click to collapse
2nd post contains ROM that I'm using and been installing it via TWRP (multirom variant)
Galaid said:
I use it as my daily ROM after using stock 4.4 for 3 months. For me it's not less stable than stock. This is pure CM ROM ported to D855 as CM team never released official CM11 for LG G3 International.
Click to expand...
Click to collapse
The microphone on Whatsapp is horrible.

[Kernel][COS13.x][COS12.1][Stock COS Kernel with Hardboot/Multirom support]

Here is a kernel for stock Cyanogen OS13.x/13.0/12.1 with hardboot support (To use the stock Rom as primary Rom in Multirom)
Code:
Use my kernel only if you are sure about the risks of flashing custom Roms/Kernel to your device. I'm is not responsible for any damage caused by using one of my files.
I have attached 2 file types.
The .img files to flash it with fastboot or an kernel flasher app.
The .zip files to flash it with a custom recovery
The COS13.0 ZNH0EAS26M kernel will also work on COS13.0 ZNH0EAS2JK
The COS13.1.1 ZNH2KAS2X1 kernel will also work on COS13.1.2 ZNH2KAS3P0
Sources:
https://github.com/bauner/android_kernel_oneplus_msm8974
thank you so much :victory::victory::victory:
just flashed this on top of your fix
phone is stuck at cyanogen logo now
apparently I should have update to CM12 first now everything is fine.
900 something views and 2 comments...! very supportive pple in this forum nowadays.. cant get even a referance.
Great Kernel mod. Thanks... Confirmed working on my 1+1 64GB. Flashed multiboot and used flashify to update TWRP.. great work.. Thanks again.
NOW ME PHONE RUNNING THE PASINO AND THE SOKP.. MUSIC WHEN AND HOW I WANT IT>
comexx said:
just flashed this on top of your fix
phone is stuck at cyanogen logo now
apparently I should have update to CM12 first now everything is fine.
Click to expand...
Click to collapse
The kernel in this thread is for cos12.1 YOG4P only!
It will not work with cos12 or cm11s
@bauner do you intend to develop this kernel any further? i like it
maxed4901 said:
@bauner do you intend to develop this kernel any further? i like it
Click to expand...
Click to collapse
If there will come another official cos update I will make a new version with multirom support.
Currently I will not add more features to the kernel because the stock kernel without any more features is currently working very fast and stable
bauner said:
If there will come another official cos update I will make a new version with multirom support.
Currently I will not add more features to the kernel because the stock kernel without any more features is currently working very fast and stable
Click to expand...
Click to collapse
yes it definitely is working well.. thanks though and look forward to future builds.:good:
bauner said:
If there will come another official cos update I will make a new version with multirom support.
Currently I will not add more features to the kernel because the stock kernel without any more features is currently working very fast and stable
Click to expand...
Click to collapse
Hi!
YOG4PAS2QL seems to be out.
Wondering if the kernel was changed, if yes, can you please release a patched version?
Tnx!
Hello?
Sent from my A0001 using Tapatalk
Pls provide kernel for latest OTA with multirom support
Hi @Bauer. I have been alive because of your kernel. I keep stock ROM as stock multirom base ROM and install other ROMs. It started with your YOG4PAS1N0 kernel version. Now that there's an update...I would like to request you to update version please.I cannot update otherwise..If I do..I will lose my other ROMs.. I do not wish to use another kernel except stock one please.
Dusha999 said:
Hi!
YOG4PAS2QL seems to be out.
Wondering if the kernel was changed, if yes, can you please release a patched version?
Tnx!
Click to expand...
Click to collapse
Phate00 said:
Pls provide kernel for latest OTA with multirom support
Click to expand...
Click to collapse
maxed4901 said:
Hi @Bauer. I have been alive because of your kernel. I keep stock ROM as stock multirom base ROM and install other ROMs. It started with your YOG4PAS1N0 kernel version. Now that there's an update...I would like to request you to update version please.I cannot update otherwise..If I do..I will lose my other ROMs.. I do not wish to use another kernel except stock one please.
Click to expand...
Click to collapse
The kernel source seems to be the same
https://github.com/CyanogenMod/android_device_oneplus_bacon/commits/stable/cm-12.1-YOG4P
I will check in the next days if there are changes in the init scripts.
If there are changes I will make an updated version soon.
But for now you can use my current kernel in YOG4PAS2QL too.
I use it myself without any problems
bauner said:
The kernel source seems to be the same
https://github.com/CyanogenMod/android_device_oneplus_bacon/commits/stable/cm-12.1-YOG4P
I will check in the next days if there are changes in the init scripts.
If there are changes I will make an updated version soon.
But for now you can use my current kernel in YOG4PAS2QL too.
I use it myself without any problems
Click to expand...
Click to collapse
Thanks for keeping the kernel alive @bauner. And thanks for confirming that but still look forward to the update.
maxed4901 said:
Thanks for keeping the kernel alive @bauner. And thanks for confirming that but still look forward to the update.
Click to expand...
Click to collapse
I have now compared the YOG4PAS1NO and YOG4PAS2QL ramdisks they are exactly the same.
So there is currently no need to make a new version
bauner said:
I have now compared the YOG4PAS1NO and YOG4PAS2QL ramdisks they are exactly the same.
So there is currently no need to make a new version
Click to expand...
Click to collapse
YOG4PAS3JL is out
It is reported to have Google search bar fix and 1NOV security update from Google.
Don't know if this patch covers kernel as well...
Sent from my A0001 using Tapatalk
Dusha999 said:
YOG4PAS3JL is out
It is reported to have Google search bar fix and 1NOV security update from Google.
Don't know if this patch covers kernel as well...
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Thx for the info.
I will check it soon
Dusha999 said:
YOG4PAS3JL is out
It is reported to have Google search bar fix and 1NOV security update from Google.
Don't know if this patch covers kernel as well...
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
There are a few changes in the init scripts.
I have attached a new version for YOG4PAS3JL in the first post
Thanks for super duper fast update...

[ROM][CAF][MM][6.0.1][Unofficial]Ressurecton Remix

Hello,
This is the CAF version of Ressurection Remix M
This ROM is totally based on Sultans caf sources.
CAF Sources used
Code:
All @Sultanxda patches
Code:
android_device_oneplus_bacon
Code:
android_external_sony_boringssl-compat
Code:
android_hardware_qcom_audio
Code:
android_hardware_qcom_display
Code:
android_hardware_qcom_media
Code:
android_kernel_oneplus_msm8974
Code:
android_packages_apps_SnapdragonCamera
Code:
proprietary_vendor_oneplus
Sources used :
https://github.com/ResurrectionRemix
https://github.com/sultanxda/android/blob/master/bacon/cm-13.0/local_manifest.xml
Credits :
Sultanxda
RessurectionRemix
CyanogenMod
Google
please tell me if i forgot someone
Downloads :-
Taken down !
Note :- If u get an error "oppo.verify_trustzone" then just flash this firmware and then flash the ROM without rebooting from the recovery
reserved
Nice!
But what are the Features of RR?
beatbrot said:
Nice!
But what are the Features of RR?
Click to expand...
Click to collapse
Same as the RR Official Build
no changes made in it
access denied ?
Sent from my Oneplus One
access denied.
abhi4328 said:
access denied.
Click to expand...
Click to collapse
Niceeeeeeeeeeeeeee !! :good::good::good::good:
He forgot to put it to public.
[fixed]
sorry changed it to public
Nice to have such a combination of ROMs. Will try for sure. Thanks.
waiting for such a rom from long time
does it support ota updates?
Aww man, it's great to see it posted here. I'm using it btw.
djcoolguyno1 said:
waiting for such a rom from long time
does it support ota updates?
Click to expand...
Click to collapse
As of now it does not, but will surely try to get it done.
Any bugs? Mainly concerned about WiFi/Data connectivity. Also which modem is the latest build using? Thanks.
No bugs, even synapse can stick it's values after reboot. If I'm not mistaken, he's using 09152015 H2OS firmware but you can always flash it to the latest.
erroct said:
Any bugs? Mainly concerned about WiFi/Data connectivity. Also which modem is the latest build using? Thanks.
Click to expand...
Click to collapse
svnhvn said:
No bugs, even synapse can stick it's values after reboot. If I'm not mistaken, he's using 09152015 H2OS firmware but you can always flash it to the latest.
Click to expand...
Click to collapse
Yes, everything's working no issues, I have tested it for 2 days before releasing it and yes its using the firmware mentioned by svnhvn
You can use the latest firmware from the latest cm13 nightlies.
flashed the rom no problems at all and best battery life
plz keep up the development and i really hope for future updates of the rom....
@amardeep434 does this rom include sultan's camera Hal or cm camera Hal?
darshiz said:
@amardeep434 does this rom include sultan's camera Hal or cm camera Hal?
Click to expand...
Click to collapse
it contains sultan's camera hal and snapdragon camera
djcoolguyno1 said:
it contains sultan's camera hal and snapdragon camera
Click to expand...
Click to collapse
Okay thanks

Franco-r50 [OOS][UNOFFICIAL]

Franco-OOS​
Code:
*** Disclaimer
[B][U]DO NOT[/U][/B] report bugs on this kernel to Franco.
This is an unofficial version of his legendary kernel.
[B][U]Don't[/U][/B] post about this on his thread either, we do not want to cause extra hassle and stress upon Franco.
[B]For the best stability and updates, do not use this kernel.[/B] Go to Franco's official thread and follow his instructions
What is it?​
This kernel is basically Franco Kernel with Oxygen OS camera hal commits, so you can flash the OOS camera blobs and this kernel to get "the best of both worlds"​
Bugs/To do list:​
Front facing camera does not work
To make the flashlight tile to work, tap the edit icon on the quick panel and exit out of it. It should work now. Note third party flashlight apps work fine.
You MUST flash Lightning Kernel OOS before this, otherwise the camera will not work.
Credits:​
Thanks to @franciscofranco for his amazing work on the kernel; all credits for the kernel and features go to him. Go buy him a coffee!
And thanks to @ab123321 for aiding me add the necessary commits for OOS support in the kernel, and aiding me
Franco Kernel Source: https://github.com/franciscofranco/bacon
His official thread: https://forum.xda-developers.com/oneplus-one/orig-development/kernel-franco-kernel-r1-t2800871
ab123321 Kernel Source: https://github.com/ab123321/android_kernel_oneplus_one
​
Instructions:​
Make Nandroid backup
Flash OOS blobs
Flash lastest Lightning Kernel OOS
Flash this kernel
Downloads:​
Blobs: https://yadi.sk/d/1vfjUs723B5TBm/
​
Lightning Kernel (FLASH OOS VERSION): https://forum.xda-developers.com/oneplus-one/development/lightning-kernel-omni-rom-v01-t3245895​
Franco Kernel w/ OOS camera support: https://www.androidfilehost.com/?fid=673368273298966001​
Sources:​
Franco Kernel Source: https://github.com/franciscofranco/bacon
​
ab123321 Kernel Source: https://github.com/ab123321/android_kernel_oneplus_one
https://github.com/ab123321/android_kernel_oneplus_one​
My modified sources:[URL="https://github.com/Pacer456/bacon"] https://github.com/Pacer456/bacon​
​
XDA:DevDB Information
FrancoOOS, Kernel for the OnePlus One
Contributors
Pacer_456
Source Code: https://github.com/Pacer456/bacon
Kernel Special Features:
Version Information
Status: Beta
Created 2017-06-21
Last Updated 2017-06-21
I have said this before, I shall say this again:
DO NOT report bugs on this kernel to Franco.
This is an unofficial version of his legendary kernel.
Don't post about this on his thread either, we do not want to cause extra hassle and stress upon Franco.
For the best stability and updates, do not use this kernel. Go to Franco's official thread and follow his instructions
Also, please follow my instructions and read OP extremely carefully, you must flash oos blobs, lightning kernel oos and then this kernel for the camera to work.
If you find a bug, please check if I am aware of it in the OP first, and then report wiry as much information as possible.
Thanks.
Pacer_456 said:
I have said this before, I shall say this again:
DO NOT report bugs on this kernel to Franco.
This is an unofficial version of his legendary kernel.
Don't post about this on his thread either, we do not want to cause extra hassle and stress upon Franco.
For the best stability and updates, do not use this kernel. Go to Franco's official thread and follow his instructions
Also, please follow my instructions and read OP extremely carefully.
Click to expand...
Click to collapse
I've been having bugs, mainly flies and a couple mosquitoes.. I've rebooted, but they're still there.. ;p
Pacer is pacing all these sudden development. Keep it up I'm loving your work :victory:
Main bug is front facing camera not working. I really need this kernel
Thanhtho96 said:
Main bug is front facing camera not working. I really need this kernel
Click to expand...
Click to collapse
Re-read OP and second post.
I am aware that it isn't working, please refrain from reporting bugs that I am aware of, unless you have more information.
Pacer_456 said:
Re-read OP and second post.
I am aware that it isn't working, please refrain from reporting bugs that I am aware of, unless you have more information.
Click to expand...
Click to collapse
Actually front camera not working on idprophecy cm14.1 with your kernel. I dont have option to switch to ffc on stock camera and cant switch to ffc on oos camera. Everything else is sweet
Are you planning to integrate this into a rom / in purenexus?
Setting.Out said:
I've been having bugs, mainly flies and a couple mosquitoes.. I've rebooted, but they're still there.. ;p
Click to expand...
Click to collapse
Throw the phone on the wall.
joefso said:
Are you planning to integrate this into a rom / in purenexus?
Click to expand...
Click to collapse
Not at the moment, I want to leave it up to the user. What if the user wants Boefella? If I implement oos blobs and this kernel they won't be able to get that kernel working.
So I will leave Purenexus' kernel as it is and give the user the choice of kernel, it is not like it is hard to flash anyway.
Pacer_456 said:
What if the user wants Boefella.
Click to expand...
Click to collapse
I smell Boeffla OOS.
iRhyiku said:
I smell Boeffla OOS.
Click to expand...
Click to collapse
Have you tried Boeffla mozzarella?.. Delicious..
iRhyiku said:
I smell Boeffla OOS.
Click to expand...
Click to collapse
We'll see. ?
Setting.Out said:
Have you tried Boeffla mozzarella?.. Delicious..
Click to expand...
Click to collapse
hmm mmm buffalo hah
Pacer_456 said:
We'll see. ?
Click to expand...
Click to collapse
Are you planning to fix front facing camera bug?
Thanhtho96 said:
Are you planning to fix front facing camera bug?
Click to expand...
Click to collapse
Nope, it's a "feature".. Lol
Setting.Out said:
Nope, it's a "feature".. Lol
Click to expand...
Click to collapse
Feature named ?bug
In wich roms works well?, i tried on XOS but nothing.

Categories

Resources