Hello guys, today i get my friend's old Samsung galaxy ace duos SCH-i589..& this is my first samsung device to be looking for development in xda (i personally avoiding samsung). I thought that all samsung devices have good xda support but from my searching on google shows that it has almost nil support.. I even can't find proper forum for installing cwm in this device..Now i think what i found from diverse locations should be put in one place.
NOTE: I am not a developer nor below is my work..i would like to all those members who made it possible.
Running from stock rom, i can root this device from the below files:
update.zip
root Instruction:
1. Download & copy the below attached "update.zip" to the root of your sdcard.
2. Turn off your phone.
3. Press & hold (Power + Volume down + Home) keys & release when the phone starts in recovery mode.
4. In recovery mode, the screen select "select update.zip from sdcard".
Remember in recovery touchscreen will not work use volume up down & home keys.
5. Select "update.zip".
6. Yes
7. Done
now to unroot this device after rooting:
unroot.zip
unroot Instructions:
1. Uninstall all [Root] apps.
2. Download "unroot.zip"
3. Turn off your phone.
4. Press & hold (Power + Volume down + Home) keys & release when the phone starts in recovery mode.
5. In recovery mode, the screen select "select update.zip from sdcard".
Remember in recovery touchscreen will not work use volume up down & home keys.
6. Select "unroot.zip".
7. Yes
8. Done.
Caution : Both files are related to each other, If rooted with "update.zip" from here then only use "unroot.zip"
Clockwork mod recovery
Now temporary cwm which can do any cwm task but u have to load it everytime.
CWM-6102.zip
cwm instruction
1. Download & copy the below attached "CWM-6102.zip" to the root of your sdcard.
2. Turn off your phone.
3. Press & hold (Power + Volume down + Home) keys & release when the phone starts in recovery mode.
4. In recovery mode, the screen select "select CWM-6102.zip from sdcard".
Remember in recovery touchscreen will not work use volume up down & home keys.
5. Select "CWM-6102.zip".
6. Yes
7. Done
8. This has to be done every time you want to load cwm recovery.
Now i haven't tested beyond that but i found a youtube link for flashing stock rom via odin
https://www.youtube.com/watch?v=4ChtmNtpk3c
but this is in spanish so i translated in english here..
You must install Samsung KIES to ensure that your PC detects your phone.
After downloading install Odin
1 - Restart the phone in Download Mode ( Vol down , Home, Power Simultaneously ) .
press volume up to continue ( or vol down to leave but it can damage... )
2- Start Odin
3 - select files and press Start
Watch Out !!! Never unplug your phone before restarting
After 5-10 minutes your phone will reboot to your new ROM
stock rom download below:
link:http://www.mediafire.com/download/z7t1yz9c615ebj1/rom+sch-i589.zip
Thank you very much! Although my SCH-i589 is currently hard brick, I think it will be very useful! -- Greetings from new members after 8 years
Related
Hi ,
by mistake i deleted all ROM's and i am in recovery mode without any ROM< to install . i tried to connect it to my PC to see if i can put it via USB new ROM but dont see nothing in my computer . any advice what i need to do ?
put the tab to the download mode and use odin. It should work
Boot your Tablet into Download Mode (Press and hold the Power and Volume Down buttons, when turn on Release the Power button but still hold the Volume Down button. then Volume Down Button Navigates Volume Up Button Selects)
Plug your Tablet into your PC and wait for it to connect.
open ODIN3_v1.85.exe
Select the PDA Button and then select the P7510XABKMP_P7510UEKMP_HOME.tar.md5 file (find in sammobile page or google search)
Hit Start and that process should take a couple minutes as it will put your Tablet back to the Factory ROM and Recovery and Kernel Images.
After it finishes it should reboot.
Questions go in the Q&A section
please help i have motorola atrix 4g at&t and please the link of neutrino or codename rom :c
if you are in CM9 that means, you have a rooted and bootloader unlocked atrix with CWM recovery. I will help you buddy...
PREPARE YOUR PHONE FOR FLASH THE ROM;
-make sure you have installed the drivers of motorola. It is recommended for your pc to recognise your phone when you connect it.
-(I recommend GT version, it is FAST and battery life is great! Better than EE.) Download the rom and the addons on the link>> http://forum.xda-developers.com/showpost.php?p=26657806&postcount=7819
-put the files in your SD CARD.( put the .zip files to your SD CARD, do not extract!)
-PREPARE yourself for the flashing
1) FULL WIPE
- https://www.dropbox.com/s/1tgt2yax88rp2mi/Moto-Fastboot FULL WIPE.rar <<< DOWNLOAD THIS.
-Power off your phone.
-open your phone in FASTBOOT mode. (press power button and volume down at the same time until you see 'Fastboot' on the screen, then press Volume up to activate it. Connect your phone to your PC.
-RUN the "Moto-FB Full Wipe.bat" and follow the instructions. (I remember that you should only press ENTER )
2)FLASHING ROM
-Power off your phone and POWER ON with POWER ON+VOLUME DOWN again.
-When you see Fastboot, Navigate with the power down button until you see ANDROID RECOVERY. (I think you should press 7 times to power down to see, if you pass it do not press up to go back just keep pressing vol down to see it again.) When you see Android Recovery Press VOL UP to enter the recovery.
-navigate to 'install .zip from sd card' with using vol up or down then press POWER ON button to enter.
-'choose .zip file from sd card' and power on button to enter again.
-find your Neutrino2.8GT.zip file and press power on!
-It will install in 15-20 seconds.
-then install the ADDONS by following the same method. (install zip from sd>choose zip from sd>default camera apk(that was the one of the addons.)) You may install all of them or some of them, depends on you. But just install them all
-after you done, reboot your phone by selecting 'reboot the phone' in the CWM recovery menu.
-ENJOY YOUR AWESOME ROM.
PRESS THE "THANKS" IF I HELPED! :angel:
Okay so i rooted my Samsung Galaxy express to jelly bean 4.2.2 using the method below.
but i cant access Samsung kies because it doesn't recognize rooted phones. So i was wondering if there was any way to keep the rooted features but go back to the stock rom? And if there is how do i do it and where do i get the file from?
Flash Clockwork Recovery
1. Download Express OUDHS CWM.exe.
2. Turn off the phone
3. Press and hold volume down and power to enter download mode (if this doesn’t work, press and hold volume down, power and home key)
4. Connect your phone to your computer via USB
5. Window ID: COM should be highlighted in yellow, this means your phone was properly detected
6. Press start and wait for installation
7. Disconnect your phone, recovery is now installed
Install SuperSU
1. Download SuperSU v1.25
2. Connect your phone to your computer via USB
3. Copy the SuperSU v1.25 file to the root of your SD card (make sure you have an SD card in your phone)
4. Turn off your phone
5. Hold volume up, power and home key to enter recovery (as soon as you see blue text on the top of the screen that read entering or booting recovery, immediately release all the buttons)
6. Click on install zip from SD card and locate SuperSU file
7. Select the SuperSU file and install
8. After installation is complete, reboot your phone
You will now have both custom recovery and SuperSU installed on your phone, which allows you to install custom ROM’s, which is the next step. (Make sure USB debugging is still enabled). Please note that these versions of CM10.1 and CM10.2 are unofficial builds, however are stable enough as daily drivers.
1. Download CM10.1(Android 4.2.2) or CM10.2(Android 4.3)
2. Download Gapps (Google Apps) for CM10.1 or Gapps for CM10.2
3. Connect your phone to your computer via USB and place ROM and Gapps files in root of SD card (make sure they are on SD card)
4. Download ROM Manager and reboot into recovery. You can also manually reboot into recovery by powering off your phone, pressing and holding volume up, power and home key.
5. Create a backup.
6. Wipe data/factory reset, wipe cache partition and dalvik cache (found in advanced)
7. Install the ROM from the SDCard
8. Install Gapps from the SDCard
9. Reboot phone and let it sit for a few minutes while it boots for the first time. It may take a few minutes, and this is only evident upon initial boot.
You will likely run into issues with non functional WiFi. To resolve this, after flashing the ROM, follow these simple steps:
1. Download this file.
2. Power off the phone.
3. Hold volume down, power and home button to enter download mode.
4. Press volume up to enter download mode.
5. Connect phone to your computer
6. Open Odin and flash the downloaded file as Bootloader (You should see a green box that indicates that the method passed and worked)
7. Reboot the phone and test WiFI
Why do you actually need Kies for?
Sent From My GT-I9000 Running Mackay ROM KK 4.4.1
Noob_20 said:
Okay so i rooted my Samsung Galaxy express to jelly bean 4.2.2 using the method below.
but i cant access Samsung kies because it doesn't recognize rooted phones. So i was wondering if there was any way to keep the rooted features but go back to the stock rom? And if there is how do i do it and where do i get the file from?
Flash Clockwork Recovery
1. Download Express OUDHS CWM.exe.
2. Turn off the phone
3. Press and hold volume down and power to enter download mode (if this doesn’t work, press and hold volume down, power and home key)
4. Connect your phone to your computer via USB
5. Window ID: COM should be highlighted in yellow, this means your phone was properly detected
6. Press start and wait for installation
7. Disconnect your phone, recovery is now installed
Install SuperSU
1. Download SuperSU v1.25
2. Connect your phone to your computer via USB
3. Copy the SuperSU v1.25 file to the root of your SD card (make sure you have an SD card in your phone)
4. Turn off your phone
5. Hold volume up, power and home key to enter recovery (as soon as you see blue text on the top of the screen that read entering or booting recovery, immediately release all the buttons)
6. Click on install zip from SD card and locate SuperSU file
7. Select the SuperSU file and install
8. After installation is complete, reboot your phone
You will now have both custom recovery and SuperSU installed on your phone, which allows you to install custom ROM’s, which is the next step. (Make sure USB debugging is still enabled). Please note that these versions of CM10.1 and CM10.2 are unofficial builds, however are stable enough as daily drivers.
1. Download CM10.1(Android 4.2.2) or CM10.2(Android 4.3)
2. Download Gapps (Google Apps) for CM10.1 or Gapps for CM10.2
3. Connect your phone to your computer via USB and place ROM and Gapps files in root of SD card (make sure they are on SD card)
4. Download ROM Manager and reboot into recovery. You can also manually reboot into recovery by powering off your phone, pressing and holding volume up, power and home key.
5. Create a backup.
6. Wipe data/factory reset, wipe cache partition and dalvik cache (found in advanced)
7. Install the ROM from the SDCard
8. Install Gapps from the SDCard
9. Reboot phone and let it sit for a few minutes while it boots for the first time. It may take a few minutes, and this is only evident upon initial boot.
You will likely run into issues with non functional WiFi. To resolve this, after flashing the ROM, follow these simple steps:
1. Download this file.
2. Power off the phone.
3. Hold volume down, power and home button to enter download mode.
4. Press volume up to enter download mode.
5. Connect phone to your computer
6. Open Odin and flash the downloaded file as Bootloader (You should see a green box that indicates that the method passed and worked)
7. Reboot the phone and test WiFI
Click to expand...
Click to collapse
I have a phone service for this, try it out will only cost £5 - Phone Service
Hi guys,
I just used Download Mode + Odin to push T110.CWM.v6.0.4.8.tar.md5 to my T110 Tablet.
After that I could boot into CWM-based Recovery v6.0.4.8 without issues.
Then I installed the zip file android-armeabi-universal-root-signed.zip
After that I rebooted. And since then I was not able to boot into Android or even Download Mode.
Only Recovery Mode works.
Then I tried to run adb devices from Windows and it reports my device ID number + recovery.
Now I was hoping somebody could help me with some adb commands to get this thing working again.
My initial goal was to root and upgrade from 4.1.2 to 4.2.2.
I would prefer using this lite rom T110UEUANE4.LiteV2.Rooted.Deodexed.June2014.zip instead of the official rom T110XXUANG2_T110OXAANG2_XEO.zip.
But at this point I would not care to much, I just hope it can be fixed again
Many thanks for your help!
How to unbrick your Samsung Galaxy Tab 3 Lite SM-T 110
Things to download:
stock kitkat rom: sammobile.com/firmwares/download/32777/T110XXUANG2_T110OXAANG2_XEO/
Odin: androidhost.org/get/PVAIv
Installation instructions:
1. Extract both zips onto your desktop.
2. Start the odin application.
3. Turn off tablet, and hold -volume button, the home button, and the power button at the same time.
4. Release power button once the tablet turns on but hold the home an the -volume button down.
5. Once transferred to new screen accept warning by pressing the +volume button.
6. Connect your tablet to your computer and wait for Odin to recognize your device.
7. Once recognized, click AP and navigate to the extracted kitkat stock rom MD5 file.
8. Wait about 5 minutes for Odin to check the file.
9. Once odin checks the file make sure to only have Restart and f. reset time checked in the options.
10-1. Click start and wait for installation. to complete.
10-2. If you cannot get to the start button, press tab until you are at the start button and press enter. Start button is at the bottom left.
11. Tablet will restart automatically and you are done.
Quick note: you just learned how to recover from a soft brick.
We know cwm is a great recovery for any android device
and for star pro there is no official cwm recovery
few days ago I got this from a youtube video and yes it's working
Download from here
Make sure you are root user :highfive::victory:
How to install this ?
Follow below steps
1. Install samsung driver in your PC
2. Open Odin
3. Hit PDA and select downloaded file
4. Turn off your mobile
5. Press Vol down + Home + Power button
6. Stop pressing when you see the screen turn on
7. Press vol up button
8.In odin unchecked Auto reboot
9. Now click start
10. After seen the reset or pass in Odin Unpluged your mobile
11. Turn it off
12. Now press Vol up+ Home + Power
Now enjoy CWM Touch recovery
Features
1. No white screen problem
2. Touch cwm recovery
3. No chance of breaking
4. Now install zip file
ETC. ETC.
Video guide
If you have any problem please tell me and if you have XDA account please hit the Thanks button :good::fingers-crossed:
Its not open recovery its White screen
od custom ROM for the phone ?? Is there a phone ??