[Q&A] Root HP 7 Voicetab 1351ra - Android Q&A, Help & Troubleshooting

Q&A for Root HP 7 Voicetab 1351ra
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Root HP 7 Voicetab 1351ra. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

need cwm
need cwm recovery for this tab.

It Worked !!!
Thanks , now it worked and now i can delete n move any contents from tab's internal to sd card... Is there any custom recovery for this tab ?

i need backup rom,,please post link

Download stock ROM here
http://support.hp.com/us-en/drivers/selfservice/hp-7-voicetab/7258765/model/7428995

Works on 1321RA
I can confirmed it works on HP 7 Voicetab 1321RA as well

HP 10 tablet roms update to lollipop
Hi
I made this post below, but didn't get a reply, so I'm not sure if I'm making it in the right area, or if it isn't being seen, or just no solutions. Anyway, here it is again!
Hello guys
I have an HP 10 tablet(similair to slate 7) running 4.4.2. It is rooted, but it hasn't updated due to the ota not recognizing the root scripts. I wanted to update to lollipop(Android 5), but couldn't find specific roms for may model. I saw some HP touch stuff though, but not sure if that would work. This tablet is a quad core 1.2ghz, ARM v7 processor rev 3 (v71). Since rooting, it no longer keeps its state, and if it goes dead, is turned off, or reboots, it defaults back to factory settings, and I have to start all over with installing my back up (via titanium). It is time to update and make it more stable. any help?

Related

[Q&A] [CWM] 6.0.3.3 for HP Slate 7

Q&A for [CWM] 6.0.3.3 for HP Slate 7
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [CWM] 6.0.3.3 for HP Slate 7. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Worked!
I used: http://forum.xda-developers.com/showthread.php?t=2570936
and got the CWM 6.0.3.3 at : http://h30467.www3.hp.com/t5/Tablets-con-Android-p-ej-HP-Slate-7/CWM-6-0-3-3-para-hp-slate/td-p/461795
thank you so much!
plz help me
I rooted but I install CWM 6.0.3.3 then only is recover 4.1. I dont understand. Plz help me to I can install CWM 6.0.3.3.
Trouble getting stock
Hi guys, before anything, im really sorry if i mispell something i'm from Brasil
So let's begin with my problem, im interested in getting my HP2801 back to original, including the removal of CMW, but i'm really a begginer and i cant get the image of its original recovery to work, so i would like to ask for help.
I've already tried flashfy, but it crashes everytime i've tried, tried using the own CWM, didnt work, even installed the linux mint, to reverse the instalation via linux, the last one didnt work because for some reason linux mint aint listening the hp 2801, but when is in recovery mode, he can se the tablet as a device.
Could anyone help me to
A- Make linux mint "see" the tablet in the adb devices
B- Help me get the tablet on it's original recovery
I really tried for over a week to do this by myself, i don't like to bug people, but i didnt saw another answer.
So please, please somebody help me.
Thanks in advance
My slate 7-2800 the formatted from a pc and is completely dead, no work, nor can enter recovery mode (black screen to access this)
What I can do?
Does enyone know if there's a way of root it/install cwm just with the stock recovery?
My tablet (HP slate 7 4600) is stuck at boot logo
Also, does enyone have a stock rom? Will it work installin it withour root?
Sorry for my english
About Hp slate 6
I found on some forum, but, i can't find any custom Rom or CWM for Hp Slate 6 voicetab. Do you give a helping for this problem? Thank you so much!

[Q&A] Root and Custom CWM recovery for VSD220

Q&A for Root and Custom CWM recovery for VSD220
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Root and Custom CWM recovery for VSD220. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Static IP for ethernet on VSD220
Hi,
Can someone tell me how to configure static ip on the ethernet port of the ViewSonic VSD220 ?
I have no problem to root it if needed.
Thank you.
VSD 220 1.3 Firmware
How did you get past the issue of "I can adb reboot bootloader, and it goes to the black screen, but any fastboot commands, just sits there waiting for device."?
Acer da220hql
Hello community XDA have this monitor Acer DA220HQL in waiting, dark screen and applied VSD220 Viewsonic rooted ROM and anything not walk the monitor achievement do appreciate a tutorial to repair the uboot or rom for this monitor or tutorial for beginners really urges me much no longer count on warranty excuse my bad English
VSD220 rooted img and tools
ftp://custaccess:[email protected]/Documents/Drivers%20and%20Firmware/Smart%20Displays/VSD220%20%26%20221/
vsd220 rom
Hi,
the link to the Rom from viewsonic is not longer existing. Do you habe an other link, or the rom?
Thanks
Successfully Rooted VSD220
I was able to finally root this thing! Found the tools necessary online from Viewsonic. I am on version 1.3.
I have rooted IMG file, may help save a bricked device. Instructions were fairly easy in Windows.
acer Da220hql
Could someone please post a video as to how to root this thing pleeeaaasssee!

[Q&A] [ME172V] AMPC Mini Rom

Q&A for [ME172V] AMPC Mini Rom
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ME172V] AMPC Mini Rom. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
me172v stuck at ready for download logo?
I made a huge mistake messing with permissions on my memo pad. i tried to change the system permissions to be r/w.... then alerts about various processes stopping happened one after another and it rebooted to dead-android screeen, i rebooted by holding power down until a screen saying 'not connected to usb' appeared, i tried plugging into my laptop running windows 7, it installed drivers for an android adb interface -hardware properties lists tablet as WM8950 USB DEVICE - type- ASUS Android Device.
So please guide me in getting things back to functional if i havent completely bricked my tablet. THANK YOU in advance!
New Firmware
Goodnight, this rom is applicable to stock rom 20140520, as did the upgrade and still had not heard of this rom, thanks
AMPC Mini-ROM
Just wanted to say; I purchased an Asus Me172v nice and cheaply from eBay, I have rooted it using the instructions on XDA and installed the mini ROM which has improved the old thing massively. Maybe we can get some new developement going on this old thing, it is an endearing little tablet and I like stuff like that.

[Q&A] Rooting HP Slate 7. Updated March 16 2014

Q&A for Rooting HP Slate 7. Updated March 16 2014
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Rooting HP Slate 7. Updated March 16 2014. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Hp 7 plus 1301
This methord works for Hp 7 plus 1301 too?
HP Slate 7 Plus 4200xx
I need the backup data for this tablet. I remembered that I had the data in my HDD, but after formatting it Anyone has it? It's the 4200la. Thanks for reading!
hp 7 plus
Hi, i follow the procedure of the hp slate 7, to root my hp 7 plus and it works BUT with every reboot it looses all my settings and it always returns to factory reset! I would appriciate any help.
Thanks.
Same problem for my hp 7 plus too
Sent from my D2105 using XDA Free mobile app
---------- Post added at 05:30 AM ---------- Previous post was at 05:11 AM ----------
1301
Hi, don't suppose you've still got at copy of the 1.1.5 update.zip do you please? HP have pulled them from their website.
Stu
Boot Loops?
Hi,
After rooting my HP Slate 7 Plus, every time I reboot it, it comes up to the Welcome Screen, as if It is new, out of the box. Is this what you're referring to as a "Boot Loop"?
Hope you can shed some light on this.
Best Regards,
Bob
External_SD recognized but does not mount
I´ve found that the card is recognized by the tablet but for some reason is not getting mounted. you can check this by looking in /dev/block/plattform/rk29_sdmmc.0 when a card is fitted, two links will appear, when not, the directory is empty.
in /etc/vold.fstab it states that the external card should be mounted in /mnt/external_sd but it doesn´t. maybe someone knows a way how to fix this?
I rooted my tablet with kingroot but i don't trust on chinese applications.
There is another way to root for the update v1.05.17?

[Q&A] [Unofficial]Xposed For Zenfone Lollipop Rom

Q&A for [Unofficial]Xposed For Zenfone Lollipop Rom
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Unofficial]Xposed For Zenfone Lollipop Rom. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Nothing happens
Hello friend, I have root, usb debugging enabled, but can not perform the procedure, the screen appears connect your zenfone 5 and nothing happens, what can it be? I have also installed the drives
sorry for bad English
How can i install .bat file ?
I have a Zenfone 6 running Lollipop and rooted, but don't have a custom recovery. Is worth trying to install Xposed?
Compatibility question
Hi! I'm looking into rooting my phone with xposed, but I'm not sure about compatibility. It's a blu studio c 5.0 HD, running stock kitkat. The processor is a 1.3ghz cortex a 7, and the GPu is a mali-400mp2. It has 1 gb of ram and 4 gb rom. Does anyone know if it is compatible with xposed? I would hate to brick my phone! Thanks for your help!
bricked
followed your instructions to the letter, now bricked, any solutions? trying to use remove xposed.bat, but in bootloop.
imgur(dot)com/0OIYFBn.png
hello, i have a problem when installing xposed. the first batch file run well but the second batch file it just stuck on the line "connecting" and didnt do anything, my phone didnt reboot or install neither. i have tried 2 times but it not work. my phone is asus tooi lollipop btw. thank for your hard work.
p/s: because i cant post link so plz change the (dot) to see my screencapture, hope it help

Categories

Resources