Disclaimer: If you're going to try this, make backups first, flash at your own risk -- I take no responsibility for what happens to your device.
Based on latest official KitKat 4.4.2 release T900UEUANK1
Built with ArchiKitchen (credit JustArchi)
Rooted
Debloated
DeOdexed
Init.d support
Zipaligned
BusyBox
KnoxLess
Modified permissions to allow writing to external SD card (credit)
ASEC Disabled (per this post, credit to Cosmic Dan and EMSpilot)
Chainfire's SuperSU
Download Debloated v5
Mirror
Download Bloated v1
Changelog:
Debloated v5: 3-18-15
Removed ASEC mod
Debloated v4: 3-17-15 -- doesn't boot
Re-debloated
ASEC mod re-enabled
Bloated v1: 3-16-15
Features listed above with the exception of bloat removal and ASEC mod.
Recommended add-on: Wanam Xposed
- Lots of customization -- battery icon, advanced reboot menu, etc.
Can't even flash, error opening zip file on twrp 8.4.1.1
saruba said:
Can't even flash, error opening zip file on twrp 8.4.1.1
Click to expand...
Click to collapse
Darn, thanks for the feedback. I just put together another one here using ArchiKitchen, if you want to give it another shot.
Download v2
EDIT: Which version of TWRP are you using? 2.8.5.0 is the latest: http://www.techerrata.com/browse/twrp2/v2wifixx
I was updating everything on the tab to try this, my friend and I are both having issues flashing TWRP 2.8.5. The latest version on twrp website that works is 2.8.0.
I tried downloading V2 but mediafire would not let me.
OMG thank you! Finally! I didn't think we were going to ever have a stock, de-odexed rom for our device. Thank You!
Hmm, I could upload it somewhere else. Did it give a specific reason for not allowing the download? I'll check once I get back home.
Tquarter said:
OMG thank you! Finally! I didn't think we were going to ever have a stock, de-odexed rom for our device. Thank You!
Click to expand...
Click to collapse
Let's see if I can actually get a working version out there
That hyperdrive rom that is in the note pro 12.2 forum, runs great on our tab pro 12.2 the only thing that doesn't work is rotation, and vibrate. Vibrate can be fixed by flashing our boot.img, but rotation stays broken. If sbreen would give permission, it would be the most popular rom in this forum if it could be ported to our device. It's the best rom I have ever installed on any device. And thank you so much for your efforts. Seems like no developers bought the tab pro 12.2!
bam099 said:
I tried downloading V2 but mediafire would not let me.
Click to expand...
Click to collapse
The v2 download link works for me. Is anyone else having issues with it?
Tquarter said:
That hyperdrive rom that is in the note pro 12.2 forum, runs great on our tab pro 12.2 the only thing that doesn't work is rotation, and vibrate. Vibrate can be fixed by flashing our boot.img, but rotation stays broken. If sbreen would give permission, it would be the most popular rom in this forum if it could be ported to our device. It's the best rom I have ever installed on any device. And thank you so much for your efforts. Seems like no developers bought the tab pro 12.2!
Click to expand...
Click to collapse
Have you tried something like Wanam Xposed to get some additional customization?
Fair warning -- my debloat script might have taken out the keyboard, so you might find yourself without one if this installs and boots for you. On the up side, the rom I built for the Galaxy Tab Pro 8.4 using the same method installed, booted, and appears to be running pretty well -- just without a keyboard at the moment.
If you downloaded the zip and want to try the install before I get a new one uploaded you can always throw whatever keyboard you use in the system/app folder inside the install zip.
trav06 said:
The v2 download link works for me. Is anyone else having issues with it?
Click to expand...
Click to collapse
I tried it on my tablet and on my computer and when I type in the captcha it just keeps popping up another captcha. I don't know why! I disabled ad blocker and everything.
---------- Post added at 05:39 PM ---------- Previous post was at 05:34 PM ----------
trav06 said:
Fair warning -- my debloat script might have taken out the keyboard, so you might find yourself without one if this installs and boots for you. On the up side, the rom I built for the Galaxy Tab Pro 8.4 using the same method installed, booted, and appears to be running pretty well -- just without a keyboard at the moment.
If you downloaded the zip and want to try the install before I get a new one uploaded you can always throw whatever keyboard you use in the system/app folder inside the install zip.
Click to expand...
Click to collapse
Congrats on the 8.4 working! And thanks again for the efforts....the 12.2 is such an amazing tablet and they've been blowing them out on sales. I can't believe more people didn't buy/develop for it. My favorite keyboard is actually the stock Samsung and I've missed it since going to CM11. I installed the hackers keyboard though and it's pretty decent. Just in case anyone wants to try one.
bam099 said:
Congrats on the 8.4 working! And thanks again for the efforts....the 12.2 is such an amazing tablet and they've been blowing them out on sales. I can't believe more people didn't buy/develop for it. My favorite keyboard is actually the stock Samsung and I've missed it since going to CM11. I installed the hackers keyboard though and it's pretty decent. Just in case anyone wants to try one.
Click to expand...
Click to collapse
Thanks -- I'm in the process of adding it back in, so should be a v3 soon.
I'd like to remove some of the annoying sound effects and get an advanced reboot menu in there, but that will probably take more time than I have at the moment.
I installed my 8.4 rom to test it out. It installs, boots, and seems to run fine except it can't download anything from the play store. All downloads show "downloading" indefinitely. I assume the same problem will exist in the 12.2 rom. As soon as I can track this down I'll upload a (hopefully) fully functional version. Getting closer...
I have twrp 8.4.1.1, can't install 8.5.0.0 don't know why but never work for me. It get stock on Samsung tab pro screen, have to reinstall 8.4.1.1 and it boots like charm.
I'm using the NK1 stock FW rooted and debloated manually. Just need some tweaks, kernel tweaks will be awesome.
trav06 said:
I installed my 8.4 rom to test it out. It installs, boots, and seems to run fine except it can't download anything from the play store. All downloads show "downloading" indefinitely. I assume the same problem will exist in the 12.2 rom. As soon as I can track this down I'll upload a (hopefully) fully functional version. Getting closer...
Click to expand...
Click to collapse
This is part of the fun! The beta testing Thanks again for the hard work
can not boot my T900 after flashing this rom
raisqureshi said:
can not boot my T900 after flashing this rom
Click to expand...
Click to collapse
Which version? Thanks for trying it, and thanks for the feedback. I need to spend some more time on it tomorrow.
trav06 said:
Which version? Thanks for trying it, and thanks for the feedback. I need to spend some more time on it tomorrow.
Click to expand...
Click to collapse
it was v.2
Related
eNoteX V2
Be surprised !
The definitive Best Customizable Rom for the best tablet Galaxy Note 10.1 2014 Edition. This is for P600 for now......
Thank you if you want to buy me a beer, I need one after these last few weeks fighting with framework and Aroma.
Don't post the link for the rom anywhere else that XDA but you can refer to the thread.
Features:
Deodex
Zipalign
Busybox
Knox free
Init.d
Supersu 2.37
Base P600UEUCNK1 (latest build)
Xluco kernel V3 Stable
Better Keyboard
4 way multi windows
Floating Multi Windows
2 themes Stock and Flat UI from Pro
You can go to very slim to any soft you want to have
Too much add to tell, just install and go to Aroma
Many Build Prop Tweaks
Ad /Data/app feature in the Rom
NitroX Sparks edition
Huge Aroma Installer
5 launchers including Magazine (probably buggy but work) , Apex, Nova, stock and stock fast
I added the soft Reboot Menu that works very well
I warn you this build is very very fast. And Battery life is dawn good. Don't install too much Samsung and Google stuff; make a good selection, you can always go back in Aroma.
Instalation
To install place the zip file in your external SD reboot in Recovery mod.
Flash zip file and follow aroma installer, use the touchscreen gently as it is very sensible and you can install something you don't want.
You can dirty flash if you want but I suggest backing up before and try.
I don't recommend that of course, better Factory reset and wipe caches.
Let the rom settle for a while.
Rom do not affect wifi recovery.
Don't tell me hand writing recognition don't work, Install languages first.
In the first Aroma page if you install Gmail Exchange as only mail don't install Gmail on the Aroma Google apps applications.
To put more apps in Multi-windows use Wanam Xposed.
To enable Nitro:
Open Terminal
SU
MENU
Option 3
1
1
To do: Some cleaning in system and Aroma descriptions.
You tell me what you want for V3 (Already have some nice ideas).
Bugs:
I hope a few to keep me busy.
Download:
LINK
Alternate link Drive
I am not a developer but will update and try to include some more features as much as I can like kernels and else.
This Rom made me think at something; I really didn't have a lot of knowledge how to build from stock so I really learned a lot, so I maybe write a tutorial before I forget for those interested. Not hard but you have to follow the steps. Decompiling framework and recompiling to change the title is not like eating a piece of cake. That was challenging.
Thanks @JustaArchi for ArchiKitchen
Thanks @dsixda for Android Kitchen
Thanks @Xluco for kernel
Thanks @22sl22 for tweaks
Thanks @k1ks for NitroX Sparks edition
Thanks @scarmona for name help and testing
Thanks @madaditya for Lazy Aroma
A big Thanks to all Beta Tester
Changelog:
New base NK1 UEUCNK1
New xluco Kernel V3 stable
New SuperSu 2.37
Super Slim if you don't install anything in Aroma
New aroma installer with 4 windows of applications to install
Add theme Flat UI
Add a the reboot menu software by default
2 choices of browser
2 choices of Emails
5 choices of launchers
5ghz router fix
Tweaks to speed things up
New Nitro spark added
Update many apps lo latest
Old versions:
LINK, Alternate link mega
eNoteX RC1, Alternate Link
Beta 2,Alternate Link
Beta 1, Alternate Link
I'm not responsible for any damage that happen to your device
Waiting for your feedback and guys, use this rom at your discretion if you like to customize more. Let's rock this forum !
Yes. So you are not interested in trying to remove any bloat?
Rom is uploading in Google drive now.
Maybe further this week I debloat. What nivel are you looking at for the removal extreme or medium?
I'm interested in it. I'll debloat, myself. Thanks!
LMMT said:
I'm interested in it. I'll debloat, myself. Thanks!
Click to expand...
Click to collapse
:good: I think I can post the link in few hours.
Yes I think we would all like a new Rom based on the new firmware. Thank you for your work.
I think the more you can leave the ROM full of bloat by default and provide options to debloat maybe in aroma?
I only say this because often users like a particular bloat app and it is easier to remove them after an install than it is to add them in usually.
Just my opinion. Thanks for the new ROM, when I get a moment I'll flash it on my tablet.
Thanks for your work. the more support we can get the better. best to take it slow and keep it stable. i agree on the debloat. there is actually a lot that i need for work. an aroma installer debloat might be best. but its your work so do what you want.
enotar said:
I just created a rom based on P600UEUCNI1 from September 9 2014
Tested on my P600 without issues. All is so smooth with this firmware.
Beta 1:
Deodex
Zipalign
Busybox
Knox free
Init.d
Supersu
Bugs:
You tell me
Pure stock nothing else, no debloat at all, I am learning and want to be as close as possible from ultimate stock.
I am not a developer but will update and try to include some more features as much as I can like kernels and else.
To do:
Update applications
Speed improvement
Debloat
Add aroma Installer
Kernel modification (Little difficult but will try)
Power Menu
I'm not responsible for any damage that happen to your device
To install place the zip file in your external SD reboot in Recovery mod and flash the Rom.
Do not forget to factory reset before flashing and I will suggest formatting data and clearing caches.
Rom do not affect modem or recovery.
Beta 1
Waiting for your feedback and guys, use this rom at your discretion if you like to customize more. Let's rock this forum !
Thanks @JustArchi for ArchiKitchen
Click to expand...
Click to collapse
Tried to d/l three times and each time I got "unkown network error" after over 1.5gb downloaded.
lewmur said:
Tried to d/l three times and each time I got "unkown network error" after over 1.5gb downloaded.
Click to expand...
Click to collapse
Download fine here but I will upload with Mega in few hours
Next step is check out some "battery saver" and "performance" tweaks from Hyperdrive rom and see if you could incorporate them into this NI1 base rom. Xluco kernel is the best. This probably the kernel for reference.
Mega link posted
graffix31 said:
Thanks for your work. the more support we can get the better. best to take it slow and keep it stable. i agree on the debloat. there is actually a lot that i need for work. an aroma installer debloat might be best. but its your work so do what you want.
Click to expand...
Click to collapse
The other thing I am always concerned about with tablets etc is that they are not always supported into the future. Having a rock solid stock ROM with all the original features intact means that long after Samsung abandons this device (sorry for being pessimistic haha) we will still have a really nice stock ROM. Some of my legacy devices are running ROMs that haven't been updated for years, but work perfectly because some nice dev made a stable and thoughtfully tweaked stock ROM.
I'm running this ROM on my tablet now, absolutely no dramas.
To those of you who are using this ROM after trying other custom ROMs, have you noticed any changes in battery life? Can you post details regarding which apps/games and/or kernel you're using?
Thanks!
Sent from my SM-P600 using Tapatalk
Honestly there arent too many mods that i actually use even with everything offered in Hyperdrive. i think the biggest ones are being able to add more apps to pen window and multiwindow. being able to split them into 4 apps is nice but its not a 12.2 screen so i am really only using 2 at a time anyway. also have the 4 way reboot menu is always nice. other than that with speed and stability that is all i need in a rom for this tablet. of course totally my opinion. i agree with what you said about keeping it stable for when this is eol with samsung is important. it will happen sooner or later however i am sure we will get L at some point. hasnt even been a year. that would be outrageous.
C to F
How can I change the temp reading in the weather widget to read in F instead of C?
Nice Job
The Rom works well nicely done thank you for a current stock rooted Rom that we can flash to
lewmur said:
How can I change the temp reading in the weather widget to read in F instead of C?
Click to expand...
Click to collapse
You need to go to the app settings
graffix31 said:
Honestly there arent too many mods that i actually use even with everything offered in Hyperdrive. i think the biggest ones are being able to add more apps to pen window and multiwindow. being able to split them into 4 apps is nice but its not a 12.2 screen so i am really only using 2 at a time anyway. also have the 4 way reboot menu is always nice. other than that with speed and stability that is all i need in a rom for this tablet. of course totally my opinion. i agree with what you said about keeping it stable for when this is eol with samsung is important. it will happen sooner or later however i am sure we will get L at some point. hasnt even been a year. that would be outrageous.
Click to expand...
Click to collapse
You do know that you don't need Hyperdrive for 4way multi window? All you need is the app multi window plus and wanam xposed tool to add more apps to it.
As for the tweaks, I found some build prop tweaks and init d tweaks from Hyperdrive that I took and they work fine with this rom :good:
@enotar
Thanks for the rom, the only suggestion I have is for the Tab S UI to be made for this NI1 rom, currently it is only available for cnd3 roms if you look in the themes and apps section but if you could make that work with this it would be great :good:
Sent from my Note 10.1 2014
enotar said:
You need to go to the app settings
Click to expand...
Click to collapse
Of course I need to change a setting. Now if only there was a setting icon or button for the widget!!!!
I'm dropping this in here for people to use as a base, I don't intend to support it but will add any fixes that people upload. It's a stock 4.4.4 twizz base with qmg support for note 4 apps. It's stable and everything seems to work but there are issues with the spen as I have only added spen libs and there are no spen options in settings, you can probably just drop n2 settings in but I haven't tried too busy working with the eteam.
Its a port of the s3 lte 4.4.4 official stock from here:
[I9300] [Touchwiz Android 4.4.4]
It works with both agni and devil kernel but devil is included. Please feel free to use it but it would be nice if credit was given as not being a developer I spent a lot of time on it.
I would like to thank @bsbachert and @Bajanman for their help
Download http://www.mediafire.com/download/sb08uib2ek6175m
XDA:DevDB Information
Port I9305NXXUFNI4, ROM for the Samsung Galaxy Note II
Contributors
sawdoctor, Bajanman
ROM OS Version: 4.4.x KitKat
Version Information
Status: Stable
Created 2014-10-07
Last Updated 2014-10-11
Thanks a lot, I downloaded the rom to my pc this afternoon from the very first link and now it's on my sdcard waiting for a test
I saw there should be some issues with spen detach sounds, but inside /system/media/audio/ui I seem to see no pen sounds, so I have just put them there by myself... Just a try before flashing.
I am looking forward to testing the new look and I will report my experience, though I suppose Dn3 4.4.2 will still be my daily rom for a while.
We're working with the eteam to port the n4 stuff, well they're porting it we're just getting it to work on our device. So hopefully we'll get a 4.4.4 base for dn3
I'll hold on to this spot...[emoji13]
sawdoctor said:
I'm dropping this in here for people to use as a base, I don't intend to support it but will add any fixes that people upload. It's a stock 4.4.4 twizz base with qmg support for note 4 apps. It's stable and everything seems to work but there are issues with the spen as I have only added spen libs and there are no spen options in settings, you can probably just drop n2 settings in but I haven't tried too busy working with the eteam.
Its a port of the s3 lte 4.4.4 official stock from here
http://http://forum.xda-developers....ck-rom-4-4-4-gt-i9305n-i9305nxxufni4-t2886807
It works with both agni and devil kernel but devil is included. Please feel free to use it but it would be nice if credit was given as not being a developer I spent a lot of time on it.
I would like to thank @bsbachert and @Bajanman for their help
Download http://www.mediafire.com/download/sb08uib2ek6175m
XDA:DevDB Information
Port I9305NXXUFNI4, ROM for the Samsung Galaxy Note II
Contributors
sawdoctor, Bajanman
ROM OS Version: 4.4.x KitKat
Version Information
Status: Stable
Created 2014-10-07
Last Updated 2014-10-07
Click to expand...
Click to collapse
I had trouble with settings constantly force closing so I couldn't complete setup.
Downloading now
I couldn't get it to boot on Philz or twrp
I got it to boot using the newest TWRP but couldn't get it beyond initial setup. Settings kept force closing on me.
I may try some amateur editing with this but I have far less experience than most anybody.
Thanks for posting this, Saw Doctor!
Sent from my Note 2 SGH-I317
Can you flash this on T-Mobile note 2?
Sent from my GT-N7105 using XDA Premium HD app
When I tried on philz it said to update to the newest binary then rebooted and when i tried to flash it in trwp it said to os was installed
I did the same thing! Did a full wipe, flashed with TWRP and after flash I went to reboot and it said no OS installed. So I just flashed again dirty and it installed and booted fine into set-up! During set up the screen froze and just pulled battery and rebooted to continue setup! After setup I got a few more screen freezes and just pulled battery and it was fine after it settled for a while:thumbup: Seemed very smooth and fast. I had to restore back cause I didnt have much time to test, but will redownload and report back
Great base @sawdoctor! Thanks for your hard work and i hope you and e team come up with somthing sick! Cause DN5v2.2 is frickin awesome and has been my daily driver for a while now and rock solid
Sent from my SGH-T889 using xda app-developers app
Goody68 said:
I did the same thing! Did a full wipe, flashed with TWRP and after flash I went to reboot and it said no OS installed. So I just flashed again dirty and it installed and booted fine into set-up! During set up the screen froze and just pulled battery and rebooted to continue setup! After setup I got a few more screen freezes and just pulled battery and it was fine after it settled for a while[emoji106] Seemed very smooth and fast. I had to restore back cause I didnt have much time to test, but will redownload and report back
Great base @sawdoctor! Thanks for your hard work and i hope you and e team come up with somthing sick! Cause DN5v2.2 is frickin awesome and has been my daily driver for a while now and rock solid
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Thanks, I had no issues with the base I uploaded and neither did @Bajanman. I'll re upload another copy later incase it's a bad upload as I'd fixed all the fc issues. Just having issues with my own phone atm think my pit file is corrupt but then I don't think flashing as many zips as i have is ever going to do the phone any good
sawdoctor said:
Thanks, I had no issues with the base I uploaded and neither did @Bajanman. I'll re upload another copy later incase it's a bad upload as I'd fixed all the fc issues. Just having issues with my own phone atm think my pit file is corrupt but then I don't think flashing as many zips as i have is ever going to do the phone any good
Click to expand...
Click to collapse
Sorry for OT, but is it intended by the team (or a teammember) to share a stable n7100 base also? Thx :fingers-crossed:
(Must admit, that my own efforts were not successful enough :crying
Androidwizzard said:
Sorry for OT, but is it intended by the team (or a teammember) to share a stable n7100 base also? Thx :fingers-crossed:
(Must admit, that my own efforts were not successful enough :crying
Click to expand...
Click to collapse
I can only tell you what I know, the eteam are concentrating thier efforts on updating dn3 to a 4.4.4 base and porting n4 features. It's not really my place to say what they have working and what they don't but I believe they have a stable base. I know what we have working on the n7105 and it is promising but there are a lot of bugs to iron out. The base I dropped I was using as a daily driver it's that stable
Just to share my experience:
- N7105, 4.1.2 booloader;
- all wipes but internal sd;
- with TWRP 2.6.31 (the one modified for 4.4.4) I got "no OS installed" so as other users have already reported;
- with the latest cwm, I was able to flash and get the rom booted, but I could not go beyond settings.
I have had neither the time to try any solution, nor to use adb for a log, because my backup to the extsd was corrupted and I was compelled to using odin with a rather damaged usb cable and it was very late (so I am now back to 4.1.2 and tbh battery life was really good) but I think that the issues could be related to the old bootloader, as I could see a very short lasting popup message referring to wifisettings.
Anyway, the rom boots even with the first shift kernel.
I will try again tonight and post a log, if adb and the usb cable are my friends
I will also try a dirty flash over 4.1.2, just to see what happens.
I have had the same results but dirty flashed a second time to get the rom to boot (but again, couldn't get beyond initial setup with settings force closes after a quick flash of wifi settings). I am on the AT&T NE5 4.4.2 bootloader for the SGH-I317 so I don't think it is exactly bootloader related.
Dirty flashing on top of a 4.1.2 build works flawlessly. Everything seems to work pretty nice, since I could skip settings, but the spen works only as a pointer and with the keyboard, while I cannot activate neither air command, nor use the pen to air scroll.
And in settings it is shown as 4.4.2, instead of 4.4.4, but it must be a typo.
I changed the SecSettings.apk and SecSettingsProvider.apk and got it to setup. But when trying to access settings after it setup would FC. Didnt really test it out because of that..
Here's a few screenshots..
Double0EK said:
I changed the SecSettings.apk and SecSettingsProvider.apk and got it to setup. But when trying to access settings after it setup would FC. Didnt really test it out because of that..
Here's a few screenshots..
https://mega.co.nz/#!09kHwCAC!wGLsrWU1mfD3UqwWHsKEimGYU8Uy-KFt6bMOsPFVUb4
Click to expand...
Click to collapse
Thanks for your effort. I downloaded, but it must have been corrupted download because now i can't even start installation.
Just wait till ops drop his fixed version.
Sent from my GT-N7105 using Tapatalk
rob_z11 said:
Thanks for your effort. I downloaded, but it must have been corrupted download because now i can't even start installation.
Just wait till ops drop his fixed version.
Sent from my GT-N7105 using Tapatalk
Click to expand...
Click to collapse
You might need to update your recovery or reboot back into recovery after a wipe.
I used TWRP 2.8.0.1 and had no issues. Also, im using Tmo T889 with 4.1.2 Bootloader.
I just wrote this this morning and finished testing in my phone. All is working fantastic!
This mod is to bring back the Lens Flare Effect.
Here are just a few previews and the rest are viewed from the installer in the update coming soon.
AURORA
FIRESTORM
LIGHTNING
METEOR
STARGATE
SOLAR SYSTEM
I have included 11 different choices all installed via Aroma Installer from custom recovery of your choice (I used TWRP). This mod does require that your rom has "init.d" support as this does need a script called at every boot to work. AGAIN CALLS SCRIPT UPON EVERY REBOOT. The script depending on each phone should take longer than 30-45 seconds. Basically flash the mod reboot and the next time you turn on the phone the effect will be active.
DOWNLOAD FLARE_LOCKSCREENv1.1a
DOWNLOAD FLARE_LOCKSCREEN_v1
Instructions for installation -
*Make a NANDROID ALWAYS AND OFTEN when modding your system!
*ROM that supports init.d script
*download and check md5 is good
*reboot to recovery and flash the zip file
*pick the effect you want (sorry I don't have the previews for the installer set up yet)
*reboot and let the script work it's magic and by time you turn your phone back on a surprise will be waving at you.
*hit the thanks button
Changelog:
v1.1a
*added the files I forgot to put in to make this work for more people (sorry for anyone who tried the last version and failed)
v1.1
*now has preview option while in recovery
*attempt to make more compatible with variety of ROMs by adding sqlite3 to xbin. (hope this helps) needs testing, mine were successful
*now has 18 options
v1
*Initial release includes 11 choices
Any feedback? Just really want to know if this is working for people? Its hard for me to tell sometimes because I am always testing various mods! I get back as close to stock as I could remember, so I could get this to be compatible with all S5 variants. So please let me know. Remember unless your rom has init.d compatibility, this won't work!
screenshot please !!!!!
Screen shots or a video will be very helpful.
naudmick said:
screenshot please !!!!!
Click to expand...
Click to collapse
Posted previews in the first post
Masum56k said:
Screen shots or a video will be very helpful.
Click to expand...
Click to collapse
The update will include previews viewed from inside the installer
Did not work for me I'm on exsexstrolite Rom other Amora installers themes and options work this did not for me
kungzila said:
Did not work for me I'm on exsexstrolite Rom other Amora installers themes and options work this did not for me
Click to expand...
Click to collapse
Thank you for the input. I am finding that only 75% of the various roms options available are reading and executing the script properly. Some are failing because of no sqlite3 in xbin. I'm looking further into the this.
It can be manually set using a sqlite editor and changing the value for "lockscreen ripple effect=2" in the data/data/com.android.providers.settings/databases/settings.db
@stangdriver44 can you make it Mobile Odin Pro OTA/update flashable??? That way it wont trip knox and wont require custom recovery
wajiman said:
@stangdriver44 can you make it Mobile Odin Pro OTA/update flashable??? That way it wont trip knox and wont require custom recovery
Click to expand...
Click to collapse
it's not possible with the use of Aroma Installer due the fact of the User Interface during installation in recovery. If you know which option you want I can take a look at getting something for you. You will have to decide which Style as you will be updating the system with only one option.
stangdriver44 said:
it's not possible with the use of Aroma Installer due the fact of the User Interface during installation in recovery. If you know which option you want I can take a look at getting something for you. You will have to decide which Style as you will be updating the system with only one option.
Click to expand...
Click to collapse
Alendr's custom room uses aroma installer and it installs fine using mobile odin pro. Nvm I'll look and let you know which style. It's hard to choose atm
DHL from Heavenly made S5
wajiman said:
Alendr's custom room uses aroma installer and it installs fine using mobile odin pro. Nvm I'll look and let you know which style. It's hard to choose atm
DHL from Heavenly made S5
Click to expand...
Click to collapse
I wasn't aware of that. Do you have a link? I would like to check that out. Have you tried flashing this with mobile odin pro? I can't say that I've ever tried so I wouldn't know. I will probably just do that now. I'll let you know. Thanks
stangdriver44 said:
I wasn't aware of that. Do you have a link? I would like to check that out. Have you tried flashing this with mobile odin pro? I can't say that I've ever tried so I wouldn't know. I will probably just do that now. I'll let you know. Thanks
Click to expand...
Click to collapse
here is the link:
http://forum.xda-developers.com/galaxy-s5/development/rom-ane4-kitkat-4-4-2-multi-csc-t2813628
its under installation> point no.2
and yes i have flashed his custom rom without tripping knox
Is it possible to flash this on note 3 running ported stock rom s5
¥Sagittarius¥
Urban pendu said:
Is it possible to flash this on note 3 running ported stock rom s5
¥Sagittarius¥
Click to expand...
Click to collapse
I'm not sure since I don't own that device. This was a post mentioning note 3
http://forum.xda-developers.com/showpost.php?p=56193488&postcount=7
has this been fix for other Rom yet ? I've tried the sqlite3 option nothing still
kungzila said:
has this been fix for other Rom yet ? I've tried the sqlite3 option nothing still
Click to expand...
Click to collapse
So you tried changing the settings.db file and still no effect?
stangdriver44 said:
So you tried changing the settings.db file and still no effect?
Click to expand...
Click to collapse
Yep..it just removed the lock effect..
kungzila said:
Yep..it just removed the lock effect..
Click to expand...
Click to collapse
Check the OP. Posted an update with an attempt to make this work for more people. Let me know. FYI the size has grown so a lot because it now has preview option in recovery.
Let me know if it works for you. My tests on different ROMs were successful
hello
hello mate can you tell me what font you are using on lockscreen screenshots???
thanks
I've got a verizon retail s5 and was wondering if you had any flashables zips of them separately. It just freezes in safestrap when attempting it says starting aroma
THUNDERBOLT V2.9
DOWNLOAD: http://forum.xda-developers.com/showpost.php?p=61852408&postcount=190
THUNDERBOLT V2.7 BOE1
Deodexed
busybox
zipalligned
fix ext sd
init.d
kernel with init.d
STOCK EXPERIENCE
3minit battery flash separately( install before setting up xposed wanam or it will not work)
DOWNLOAD
http://forum.xda-developers.com/showpost.php?p=61485120&postcount=156
OLDER LINKS
apps:
titanium
esfile explorer
lazy swipe
n4 hidden features
toolbox
universal init.d
wiziconizer
power menu
removed some samsung apps (you will notice blank icons in edge menu)
FLASHING:LOLLIPOP
must be on stock BOE1 rooted with twrp or cwm
flash as normal
***do not wipe data or anything else
First boot takes a while.
AFTER FIRST BOOT
freeze or delete
sknox 1.0
sknox II 1.0
& anything else you need
DOWNLOAD
v2.3 13APR
https://www.androidfilehost.com/?fid=95916177934554247
$$ network speed indicator & 3minit (flashable) thanks: myself (long due lol)
REMOVED: sfinder & qconnect BAR
https://www.androidfilehost.com/?fid=95916177934555731
https://www.androidfilehost.com/?fid=95916177934554633
5Way Reboot: https://www.androidfilehost.com/?fid=95916177934554683
older
https://www.androidfilehost.com/?w=files&flid=26847
CHECK POST 2 FOR TW LAUNCHER BY CLCK
thanks:
archi awesome kitchen
kmokhtar79
micky387 3minit mod
arpanbag1996
Beetle84 (TESTING)
TW Launcher by CLCK
http://forum.xda-developers.com/note-edge/themes-apps/edge-5x5-launcher-lollipop-n915g-rom-t3065401
15 toggles ( OPTIONAL)
for this mod you need sqlite editor app installed.
open:-- data/data/com.android.provider.settings/databases/settings.db/system/
in the list go to number 268 & 269 and change the value from 10 to 15 press save and exit.
remove brightness slider
open:-- data/data/com.android.provider.settings/databases/settings.db/system/
go to 265 notification_panel_brightness_adjustment and change value to 0
NITRO X SPARK (this is not my work sharing)
PERFORMANCE TWEAK not integrated in the rom
please read the forum before proceeding.
http://forum.xda-developers.com/and...mod-projct-mod-boost-nitro-x-edition-t2809443
DOWNGRADE to KITKAT
EASIEST WAY TO REVERT TO KK
: Enable USB debugging reboot into recovery (in lollipop)
: WIPE:-- SYSTEM, DATA, CACHE, INTERNAL SD, DALVIK (dont reboot)
: battery out 3 button reboot into DOWNLOAD MODE (safe bet)
: odin 3.09 and install the kk tar file
and you'll be back at kitkat
So, just checking as you didn't say, is this Kitkat or the new Lollipop rom?
If anyone has gone to Lollipop there's a chance, if the bootloader was flashed,that they can't go back to 4.4.4 kitkat. It'll just result in bootloops until they reflash Lollipop...
ultramag69 said:
So, just checking as you didn't say, is this Kitkat or the new Lollipop rom?
If anyone has gone to Lollipop there's a chance, if the bootloader was flashed,that they can't go back to 4.4.4 kitkat. It'll just result in bootloops until they reflash Lollipop...
Click to expand...
Click to collapse
Good find
Wow ! Finally somone has begun providing a Custom debloated ROM for 915G.
Can the OP give a list of what has been done to the original ROM i.e. softwares removed, tweaks etc... I am use to REVOLUTION style custom roms, smooth, fast, stable and tweaked for performance without being unstable. Thanks for providing this rom.
Looking forward to the develpments here.
Well done.
globalgpj said:
Wow ! Finally somone has begun providing a Custom debloated ROM for 915G.
Can the OP give a list of what has been done to the original ROM i.e. softwares removed, tweaks etc... I am use to REVOLUTION style custom roms, smooth, fast, stable and tweaked for performance without being unstable. Thanks for providing this rom.
Looking forward to the develpments here.
Well done.
Click to expand...
Click to collapse
this was a test build which happen to work very smooth so i decided to share it, didnt keep any record of what i removed
next build will be a bit more professional.
panjaby said:
this was a test build which happen to work very smooth so i decided to share it, didnt keep any record of what i removed
next build will be a bit more professional.
Click to expand...
Click to collapse
No worries mate, Thanks for this... :good:
Excellent the first G rom!
Thx for the effort mate.
panjaby said:
this was a test build which happen to work very smooth so i decided to share it, didnt keep any record of what i removed
next build will be a bit more professional.
Click to expand...
Click to collapse
Yes, fully understand. I guess you will start giving them version numbers as you develop your custom Lollipop ROM.
It takes time to add tweaks and test them out. But in the end, it should just get better.
I pop over to the Note 4 thread every now and then and see what tweaks they are coming up with, as there are a lot more Note 4 users than Note 4 Edge users.
I will defintely be keeping and eye out here and will install your next ROM and give it a go.
Keep up the great work.
No one else is really doing anything for 915G, so you're the Man !
globalgpj said:
Yes, fully understand. I guess you will start giving them version numbers as you develop your custom Lollipop ROM.
It takes time to add tweaks and test them out. But in the end, it should just get better.
I pop over to the Note 4 thread every now and then and see what tweaks they are coming up with, as there are a lot more Note 4 users than Note 4 Edge users.
I will defintely be keeping and eye out here and will install your next ROM and give it a go.
Keep up the great work.
No one else is really doing anything for 915G, so you're the Man !
Click to expand...
Click to collapse
yeah i was getting sick of no development of G and a laggy phone, guess it was an incentive to put some effort in.
at least now we are open to some of the tweaks available on xda. i'm not a dev but i will try my best.
by the way anyone getting f.c with stock front facing camera.
panjaby said:
by the way anyone getting f.c with stock front facing camera.
Click to expand...
Click to collapse
No FC here.
If you need a hand testing or whatever send me a message, glad to see something for the 'g' around here. I used the zip you linked to earlier @panjaby and my phone is snappier now.
And yes, im getting fc on front camera, ive cleared the camera apps data and reset but still no good. I did dirty flash over stock lollipop so that may be the issue.
panjaby said:
yeah i was getting sick of no development of G and a laggy phone, guess it was an incentive to put some effort in.
at least now we are open to some of the tweaks available on xda. i'm not a dev but i will try my best.
by the way anyone getting f.c with stock front facing camera.
Click to expand...
Click to collapse
Yep, was gonna mention it if no-one else did... I did a clean install, wonder if those with no problems did a dirty flash?
Gotta scroll through all the repliesas theat was answered but just got home from work and gotta be back there in less than 8 hours...
Also found the 3 minit battery mod by micky387 doesn't work in this rom but does in stock lollipop rom...
ultramag69 said:
Also found the 3 minit battery mod by micky387 doesn't work in this rom but does in stock lollipop rom...
Click to expand...
Click to collapse
Working fine here, i installed the zip micky387 posted in the lollipop leak thread
Beetle84 said:
Working fine here, i installed the zip micky387 posted in the lollipop leak thread
Click to expand...
Click to collapse
Yep, I went back and tried again. Found I'd installed the KK mod instead.
I seriously need some sleep. What a stupid thing to do..
Fantastico and many kudos. Thankyou for very for finally getting one going, I'm going to be watching this thread very carefully
panjaby said:
yeah i was getting sick of no development of G and a laggy phone, guess it was an incentive to put some effort in.
at least now we are open to some of the tweaks available on xda. i'm not a dev but i will try my best.
by the way anyone getting f.c with stock front facing camera.
Click to expand...
Click to collapse
yes got fc with front cam so reverted back to stock rooted...flashed it with cwm and right not i flashed twrp 2.8.1.1... not able to find the recovery u mentioned..if u could give me the link of twrp ur rom works with i shall install it again n see !!
dhingra_vinay_in said:
yes got fc with front cam so reverted back to stock rooted...flashed it with cwm and right not i flashed twrp 2.8.1.1... not able to find the recovery u mentioned..if u could give me the link of twrp ur rom works with i shall install it again n see !!
Click to expand...
Click to collapse
http://teamw.in/project/twrp2/266
There you go mate i am using 2.8.4
Disclaimer. I am not responsible for anything that happends to you, your phone or dog. Im not responsible for anything that may happen if you flash this rom on your device. Flash at your own risk. First time me modding anything in life. You take full responsibility for your actions and consequences.
ROM DATE 11-12-2016 ANDROID 6.0.1 V4
UPDATED ROM 1/22/17 to V5
1. Darklord N5 modded with N7 apps. July Security patch. Sprint VVM Working and no FC on hangup!!! This rom is Universal for most carriers
2. Xposed included but not system wide must install files needed thru twrp I will provide the file.
3. Latest Viper included with adaway and some updated N7 apps.
4. Debloated as much as i could.
5. UBER Battery life
6. Latest VVM For Sprint
7. Super Smooth no lag
8. 6x5 Dock with 5x5 page
9. Hotspot
10. Themes
DOES NOT INCLUDE A KERNEL!!!!!
MUST FLASH USING TWRP 2.8.7.0!!!!
I RECOMMEND DARKLORD UX 2.0 hltespr its super smooth i get 15 hours Battery life without powersaving!!! about 40 on max settings 33 on mid. With white color theme. Black out device get up to 85 hours on max power save and 25 hr without power save.
Id like to thank the Darklord for his hard work and for letting me use his rom as a base.
Thank Audax for his kernel cleaner
Thank Buzbee for his Apns MNVO
I personally worked on this for months as you see the base is from july and that was the base i took.
I also included a MM Fix for SD card as some apps have an issue writing to SD you must install xposed to use it.
There will not be any updates for this rom unless i get some help please do not use my work without asking first.
I need someone who can help update the security patches as well as some of the base apps.
MUST USE LATEST BASEBAND AND FIRMWARE FROM SPRINT!!! which is PH1 if not upgrade to it reroot and then flash this rom.
Rom Video Installation Link
https://youtu.be/A3AbQHEjkRo
1. Watch Video (if downloaded old rom before V5)
1A. If downloaded V5 install as any other ROM use XAS or SPR CSC in aroma, reboot into recovery, clean kernel with cleaner, then install kernel of choice, reboot to system, wait 15 min. Profit.
2. Activate VM [email protected]
3. Give thanks or donate thanks for any donations
4. Enjoy
Note. Regular Message app wont work fully please use Textra or another alternate to the base one as it can send text and receive but cannot send Multimedia text. I recommend Textra Its beautiful and it automatically picks up Sprint APN Settings
PH1 Download
http://forum.xda-developers.com/note-3-sprint/general/rom-odin-ph1-update-t3463178
Rom Link below
New Link 1/22/2017 ALL In One Rolled UP TY @taijidude For This V5!
https://mega.nz/#!kYgzxZCT!YjDcaNfK4ec-1PNs3glWFU4NHFrNOxdaGVSfiBXjbXA
V5 Changelog
Here are the changes included:
- updated apns-conf.xml for both SPR and XAS so the network connects
- updated build.prop to include some Sprint specific configurations
Added
FlipboardBriefing (I like this app and use it daily... saw where others made comment so added it)
VVM
Miscellaneous Downloads Section
Kernel Cleaner
https://mega.nz/#!UMRFia6T!oU0uPaaTEdenkICyEoZZApfHa1-posmfzZFLL-0v8Ms
MVNO APNS
https://mega.nz/#!oEAjXLhI!bI1-MVMDOCpELXrRCMmLJ7O_ApK0kCTz-yfKLeCpqA8
Sprint VVM Version 8.0
https://mega.nz/#!RAgymRZA!e6kXAcwuL_q5der64E07Z6XPBRfgtky0El9Xr1jPzlE
3minit flashable by @Sczar Thank you so much for your help (use gravity box to get rid of the regular battery icon) also clear cache after installing the mod
https://mega.nz/#!0EVg0Cjb!gI_xodtl_MwfUKfkA5f89XIdqIe4W_8Rz7OhSmSVJQI
*Download Latest Adreno Drivers for 30% Increase in graphics here*
https://forum.xda-developers.com/galaxy-note-3/orig-development/adreno-330-drivers-note-3-t3523915
where do i get PH1 firmware
quietmode01 said:
where do i get PH1 firmware
Click to expand...
Click to collapse
http://forum.xda-developers.com/note-3-sprint/general/rom-odin-ph1-update-t3463178
HERE =)
Does SMS/MMS and data work with this? Are there any quirks like some of the other ROMs, like if the other person hangs up first you lose data? Or is this like a Sprint based port similar to Sac's, where all native things work including updating PRL/Profile etc? If so that would be AWESOME.
Thank you. I've been waiting for something new for my note 3. Will try when off work
Sent from my SM-N900P using XDA-Developers mobile app
12gage said:
Does SMS/MMS and data work with this? Are there any quirks like some of the other ROMs, like if the other person hangs up first you lose data? Or is this like a Sprint based port similar to Sac's, where all native things work including updating PRL/Profile etc? If so that would be AWESOME.
Click to expand...
Click to collapse
Please read the original post. This is not like sacs. I dont have that kind of time to have that correctly fixed but its in there I just dont know how to activate those feature (PRL, Profile Update). SMS works but again not fully for Multimedia. Use alternate app for text like Textra if you want full capabilities. I did reach out to Sac23 for advice but he stated and i quote "Its not as simple as copy and paste" "Plus i no longer have a note 3 with Sprint to be able to test" Yet if any other developer has the time to help me fix it id gladly welcome it. It does not have FC on hangup
quietmode01 said:
Thank you. I've been waiting for something new for my note 3. Will try when off work
Sent from my SM-N900P using XDA-Developers mobile app
Click to expand...
Click to collapse
NP. Let me know what you think.
Thanks for your work on this ROM, i myself can not get it to work tried 3 times with both kernels and it just hangs on the Samsung splash. truly a bummer was really excited to try out something diffrent.
binaryimage said:
Thanks for your work on this ROM, i myself can not get it to work tried 3 times with both kernels and it just hangs on the Samsung splash. truly a bummer was really excited to try out something diffrent.[/QUOTE
it takes about 15-20 minutes to boot did you flash specifically as i instructed? I just reflashed it myself and it worked. Ill try and post a video of going thru the flashing process. Sorry it didnt work out for you
Click to expand...
Click to collapse
What recovery did you use to install this rom?
When I tried installing it, it sat for well over 20 minutes on the Samsung Splash Screen.
TWRP 2.8.7.0
I have made a video of the installation boot up time was 9 minutes after the install of rom. ill post the video tomorrow after i edit it it has my phone number and i need to block it
Im on 2.8.7.0 twrp, ph1 firmware, ill try again. Dont understand, maybe its just taking longer then most. So it is supposed to sit on the samsung splash screen?
binaryimage said:
Im on 2.8.7.0 twrp, ph1 firmware, ill try again. Dont understand, maybe its just taking longer then most. So it is supposed to sit on the samsung splash screen?
Click to expand...
Click to collapse
Sits on Samsung for about 10 min on mine first boot. Not when it says Samsung galaxy note 3 it just says Samsung by itself
Mine might just take a little longer then normal ill give it another shot.
binaryimage said:
Mine might just take a little longer then normal ill give it another shot.
Click to expand...
Click to collapse
I added the video on the OP. Enjoy
Thanks for posting the video. I followed along exactly, and my phone gets stuck at the "Samsung Galaxy Note 3" screen. It never advances to the plain Samsung screen.
spaceshipunicorn said:
Thanks for posting the video. I followed along exactly, and my phone gets stuck at the "Samsung Galaxy Note 3" screen. It never advances to the plain Samsung screen.
Click to expand...
Click to collapse
Maybe its a bad upload. I will upload v4 and after I make sure it work it will be uploaded tonight sorry for the inconvience
spaceshipunicorn said:
Thanks for posting the video. I followed along exactly, and my phone gets stuck at the "Samsung Galaxy Note 3" screen. It never advances to the plain Samsung screen.
Click to expand...
Click to collapse
Same thing happened to me using Darklord kernel, tried the other kernel and would get to samsung screen and just sit, i left it alone for 40 min. Had to pull battery to shut it off, glad to know its not just me. It was driving me nuts especially after watching the video and knew i did it right.
Guys i figured out it was bad coding in the build prop i have fixed and retested on 2 different note 3s its working now im re-uploading the rom. I apologize for all the inconvenience @spaceshipunicorn @binaryimage