Required:
- Flashtool in the latest version from: http://flashtool.net
- DualRecovery by NUT as installer.zip: http://nut.xperia-files.com (Download the correct one for your device and at least version 2.8.1+! And only if you have no working recovery on your device. )
- Full Root on 23.0.A.2.93 (Download) for example with this method: http://forum.xda-developers.com/crossdevice-dev/sony/giefroot-rooting-tool-cve-2014-4322-t3011598 / 23.0.1.A.5.77
Featurelist:
- SuperSU integrated (2.46)
- DualRecovery by NUT integrated (2.8.3) - Currently not working on Android 5.X!
- Fixed RW (/system) - Thanks to javierdsv
Can be used on locked and unlocked bootloader.
Be careful with encrypted devices. It may cause a softbrick on updating- process and afterwards.
Firmware Files:
D5803 (other Versions will be released asap!)
- Flashable.zip's and FTF files in folders - sorted by devices
(Tanks to javierdsv for sharing the "fixed rw flashable.zip"!)
The Flashable.zip i've created with the mighty tool PRFCreator by zxz0O0.
Installation/Update (short) guide:
0. Downgrade to the firmware 23.0.A.2.93 and root it (with giefroot) (only if you have no root!=
0.1. Install the LockedDualRecovery by NUT with the installer.zip (install.bat)
1. Put the downloaded update file (ROM.zip) on your device. I recommend you to put it directly on the device.
2. Boot into the recovery (While rebooting -> when the info LED flashs -> press shortly the VOL button for the Recovery you prefer)
(On Recovery you may create a twrp/cwm backup of your device if you get any issues on updating process!)
3. Flash the ROM update file (.zip) with "install zip".
4. Wipe cache and dalvik cache (perhaps under advanced).
5. Reboot to system.
You may have to wait some minutes on the first boot because of initializing system for first time (optimizing apps etc.).
What to do if you get permission errors? (While installing for example the Recovery)
Untill NUT updates his DualRecovery you should fix permissions with ADB with the following commands:
(tested with command line from the giefroot_V...\files\ directory -> shift + right mouse -> open cmd "here")
Either you could try the modified DualRecovery (installer) by NUT (modified by monx): http://d-h.st/iM9p
Code:
adb push systemrw.sh /data/local/tmp
adb push modulecrcpatch /data/local/tmp
adb push wp_mod.ko /data/local/tmp
adb shell
chmod 777 /data/local/tmp/systemrw.sh
chmod 777 /data/local/tmp/modulecrcpatch
chmod 777 /data/local/tmp/wp_mod.ko
su
cd /data/local/tmp
./systemrw.sh
Special Thanks to:
[NUT] (DualRecovery and his efforts!)
zxz0O0 (giefroot rooting tool, PRFCreator and his efforts!)
Chainfire (for amazing SuperSU)
XDA: DevDB Information
[STOCK][D58XX][5.0.2] Firmware 23.1.A.0.690 Generic [ROOT/XZDR/SuperSU], Stock Firmware Xperia Z3 Compact
Contributors
meetdaleet
ROM OS Version: 5.0.2 Lollipop
ROM Firmware Required: Stock - 23.0.A.2.93/23.0.1.A.5.77
Version Information
Status: Stable
Release Date: 2015-03-16
Created 2015-03-16
Thanks!!! A question. Is it working Mount R/W; R/O?
Thanks!
PherChe said:
Thanks!!! A question. Is it working Mount R/W; R/O?
Thanks!
Click to expand...
Click to collapse
R/O
sototallycarl said:
R/O
Click to expand...
Click to collapse
Just need to flash a zip, i dont need flash other files with Flashtools like .93 to .77 and to hold root access? Did tu flash it? what about blotware?
thanks thanks,
Yeah, I just flashed the zip. No other steps. I have root but cannot write to /system. I see no additional bloatware. Any disabled/frozen apps I did in 4.4.4 remained that way.
Could I just install the flash.zip from rooted .77?
Does anybody try this way?
Can i flesh the zip on my d5833
is android l worthwhile if i lose xzdualrecovery?
sototallycarl said:
Yeah, I just flashed the zip. No other steps. I have root but cannot write to /system. I see no additional bloatware. Any disabled/frozen apps I did in 4.4.4 remained that way.
Click to expand...
Click to collapse
Did you try the steps for "What to do if you get permission errors? "
i making a own flash.zip i will see.
meetdaleet said:
Required:
- Flashtool in the latest version from: http://flashtool.net
- DualRecovery by NUT as installer.zip: http://nut.xperia-files.com (Download the correct one for your device and at least version 2.8.1+! And only if you have no working recovery on your device. )
- Full Root on 23.0.A.2.93 (Download) for example with this method: http://forum.xda-developers.com/crossdevice-dev/sony/giefroot-rooting-tool-cve-2014-4322-t3011598 / 23.0.1.A.5.77
Featurelist:
- SuperSU integrated (2.46)
- DualRecovery by NUT integrated (2.8.3) - Currently not working on Android 5.X!
Can be used on locked and unlocked bootloader.
Click to expand...
Click to collapse
Im currently on 4.4.4 unlokced bootloader with drm fix. Going to lock it up and restore TA just for this. Im on a custom kernel right now, will this flash a new kernel, propably yes? So i dont have to worry
PherChe said:
Did you try the steps for "What to do if you get permission errors? "
i making a own flash.zip i will see.
Click to expand...
Click to collapse
Should have mentioned I did not. Didn't have a cable handy.
Okay, so right now I'm running the Sony Xperia 4.4.4 ROM with unlocked bootloader and ROOT. But I'm using a custom kernel. Can I apply this update, keep root, and not even wipe data??
bofis said:
Okay, so right now I'm running the Sony Xperia 4.4.4 ROM with unlocked bootloader and ROOT. But I'm using a custom kernel. Can I apply this update, keep root, and not even wipe data??
Click to expand...
Click to collapse
from what i understand you need to restore ta partition and lock up bootloader before updating to stock loli. but you can keep root with the method in the first post
So, just flash the ZIP? Does it overwrite current installed apps? No need to flash kernel and everything else from an ftf file?
How to keep root?
I'm currently on 23.0.1.A.5.77 rooted with no custom recovery installed
Can someone explain me in a simplest way how to upgrage do Lollipop and keep roooted?
Locked bootloader
lamale78 said:
I'm currently on 23.0.1.A.5.77 rooted with no custom recovery installed
Can someone explain me in a simplest way how to upgrage do Lollipop and keep roooted?
Locked bootloader
Click to expand...
Click to collapse
I think you could try to install NUT recovery using the installer for Windows (you have root, so adb commands should work), then flashing this firmware over the one you're using.
Hi guys, thanks for all your posts, I currently have kk version 5.77, pre rooted and dual recovery working, I would like to try this lollipop release pre rooted, I am aware of the inability to use dual recovery, however I will still try it if there is a way to revert back to the release compatible with giefroot, anyone that could help me with this, it will be highly appreciated.
unable to install/boot into recovery
Jac0verflow said:
I think you could try to install NUT recovery using the installer for Windows (you have root, so adb commands should work), then flashing this firmware over the one you're using.
Click to expand...
Click to collapse
I'm trying to install/boot into recovery and nothing works
Downloaded already latest release od xNUT dual recovery installer zip. file , ADB seems to install everyhing, at the end appears: "enjoy recoveries" and that is all,
boots normally as phone always boots. No volume up and down combination works
What I do wrong?
wait for new rec that can work on 5.0
Sent from my D5833
But I have now 4.4
Related
Required:
- Flashtool in the latest version from: http://flashtool.net
- DualRecovery by NUT as installer.zip: http://nut.xperia-files.com (Download the correct one for your device and at least version 2.8.1+!)
- Root on 23.0.A.2.93 (Download) for example with this method: http://forum.xda-developers.com/crossdevice-dev/sony/giefroot-rooting-tool-cve-2014-4322-t3011598
Featurelist:
- SuperSU integrated
- DualRecovery by NUT integrated (2.8.1)
Can be used on locked and unlocked bootloader.
Firmware Files:
D5803 and D5833
- Flashable.zip's and FTF files in folders - sorted by devices
The Flashable.zip i've created with the mighty tool PRFCreator by zxz0O0.
Installation/Update (short) guide:
0. Downgrade to the firmware 23.0.A.2.93 and root it (with giefroot)
0.1. Install the LockedDualRecovery by NUT with the installer.zip (install.bat)
1. Put the downloaded update file (ROM.zip) on your device. I recommend you to put it directly on the device.
2. Boot into the recovery (While rebooting -> when the info LED flashs -> press shortly the VOL button for the Recovery you prefer)
(On Recovery you may create a twrp/cwm backup of your device if you get any issues on updating process!)
3. Flash the ROM update file (.zip) with "install zip".
4. Wipe cache and dalvik cache (perhaps under advanced).
5. Reboot to system.
You may have to wait some minutes on the first boot because of initializing system for first time (optimizing apps etc.).
What to do if you get permission errors? (While installing for example the Recovery)
Untill NUT updates his DualRecovery you should fix permissions with ADB with the following commands:
(tested with command line from the giefroot_V...\files\ directory -> shift + right mouse -> open cmd "here")
Either you could try the modified DualRecovery (installer) by NUT (modified by monx): http://d-h.st/iM9p
Code:
adb push systemrw.sh /data/local/tmp
adb push modulecrcpatch /data/local/tmp
adb push wp_mod.ko /data/local/tmp
adb shell
chmod 777 /data/local/tmp/systemrw.sh
chmod 777 /data/local/tmp/modulecrcpatch
chmod 777 /data/local/tmp/wp_mod.ko
su
cd /data/local/tmp
./systemrw.sh
Special Thanks to:
[NUT] (DualRecovery and his efforts!)
zxz0O0 (giefroot rooting tool, PRFCreator and his efforts!)
XDA: DevDB Information
[STOCK][D58XX][4.4.4] Firmware 23.0.1.A.5.77 Generic [ROOT/XZDR/SuperSU], Stock Firmware Xperia Z3 Compact
Contributors
meetdaleet
ROM OS Version: 4.4.x KitKat
ROM Firmware Required: Stock - 23.0.A.2.93
Version Information
Status: Stable
Release Date: 2015-01-25
Created 2015-01-25
What about d5833 ftf
@muzab a
I'm currently creating the firmware files and will upload them further.
I think they will be available at the evening
Kind Regards
meet
Which ftf to use for d5833?
Great , thanks! In case we can go back to totally stock? (For any case) And for lollipop I imagine will have to flash a rom, right?
Matteo Mazzu said:
Great , thanks! In case we can go back to totally stock? (For any case) And for lollipop I imagine will have to flash a rom, right?
Click to expand...
Click to collapse
You may delete some specific folders on internal SD (sdcard0) and flash a ftf without changing anything (like wipes etc.).
abj2aqua said:
Which ftf to use for d5833?
Click to expand...
Click to collapse
I've just added the D5833 files to the OP.
Kind Regards
meet
The firmware file is D6603, not D5803
Sorry i've just put the wrong link on the OP.
Corrected it right now
Thanks for yozr help!
You can find all my files under:
http://mega.leetbox.net
Kind regards
Meet
Thanks a lot!
i read in the op that this can be flashe don locked bootloaders aswell as unlocked but i also heard that if we want to flash any rom so we must unlock bootloader , so im a bit confused now? can i just flash it on locked bootloader?
pw1nce said:
i read in the op that this can be flashe don locked bootloaders aswell as unlocked but i also heard that if we want to flash any rom so we must unlock bootloader , so im a bit confused now? can i just flash it on locked bootloader?
Click to expand...
Click to collapse
The "ROM" i've opened to you on this thread is a stock rom (just with SuperSU and DualRecovery integrated).
There is the stock kernel inside why it runs on both. Locked and unlocked bootloader!
meetdaleet said:
The "ROM" i've opened to you on this thread is a stock rom (just with SuperSU and DualRecovery integrated).
There is the stock kernel inside why it runs on both. Locked and unlocked bootloader!
Click to expand...
Click to collapse
ok thnx broo , do we need to wipe system , data and then flash or dirty flash ? thanks
edit : i just did as mentioned in op , after flashing i downloaded the recovery and ran install.bat , it installed the new recovery mentioned in op , it rebooted into that recovery , the icons are too damn big , i can only see ''install'' , wipe , backup option on all the screen , now i have no idea how to get out of here , power buttonn evn if i hold wont work , any suggestion?
pw1nce said:
ok thnx broo , do we need to wipe system , data and then flash or dirty flash ? thanks
edit : i just did as mentioned in op , after flashing i downloaded the recovery and ran install.bat , it installed the new recovery mentioned in op , it rebooted into that recovery , the icons are too damn big , i can only see ''install'' , wipe , backup option on all the screen , now i have no idea how to get out of here , power buttonn evn if i hold wont work , any suggestion?
Click to expand...
Click to collapse
Press on Power + high Volume
Two questions, the .93 fw was country specific, this update doesn't require a specific version?
I feel kind of clumsy asking this but i haven't found the meaning of "XZDR", what does it mean?
Thanks!
My root seems to have broke after flashing.Can't mount in root explorer
@pikeylfc,
Did you read the OP?
pikeylfc said:
My root seems to have broke after flashing.Can't mount in root explorer
Click to expand...
Click to collapse
meetdaleet said:
@pikeylfc,
Did you read the OP?
Click to expand...
Click to collapse
There's a problem with RIC on .5.77, making it impossible to mount system r/w. Nothing to do with root, as you can do other root actions just fine.
You just need to update XZDR, [NUT] just uploaded 2.8.1, which has been fixed for Z3C on .77. Also TWRP has been updated.
Edit: Sorry, see that you already updated OP for XZDR 2.8.1.
Sydrox said:
I feel kind of clumsy asking this but i haven't found the meaning of "XZDR", what does it mean?
Thanks!
Click to expand...
Click to collapse
Same question here what is XZDR?
Sydrox said:
I feel kind of clumsy asking this but i haven't found the meaning of "XZDR", what does it mean?
Click to expand...
Click to collapse
ovizii said:
Same question here what is XZDR?
Click to expand...
Click to collapse
XZDualRecovery
What is XZDR? There are two versions one with that and other one without...
Another question: after done all the steps in the op, if we flash another kernel (with locked boot) it will boot?
Thanks
Sent from my D5803 using XDA Free mobile app
Rooting Method for Xperia Z Ultra Lollipop V5.1 .
What You Need :
5.1 .
Root & Recovery Pre-Installed .
Flashtool & PC .
MAKE A BACKUP FIRST​
How To :
As a Start, You Gonna have Lollipop 5.0 with Root & Recovery installed .
Move 5.1 to firmwares folder .
Download This SuperSu Flashable file and move it to SDCard & Internal Storage .
Open Flashtool .
Select The ROM .
Exclude Kernel ONLY .
Flash the ROM .
Boot the Phone and enter Recovery ASAP .
Install the ZIP File, if Flashtool didn't wipe Internal storage yet, then install it from Internal storage, otherwise from SD Card .
Power Off .
Open Flashtool .
Select 5.1 .
Exclude All expect the Kernel .
Un-tick Data / Cache and the third option too .
Flash .
Boot ! .
As a feedback from my friend, he said there was not problem with 5.0 kernel on 5.1 system for first boot ( recovery entering only ) .
Please feedback, and don't forget the backup !
is it 5.1 or 5.1.1?
The quick way to root any ROM, including the newly released 5.1.1 is, if you have an unlocked bootloader:
- Hotboot any custom kernel with a recovery (fastboot)
- Flash SuperSU
- Reboot
If you want CWM/TWRP:
- Flash NUT's Dual Recovery kernel through fastboot
- Reboot
You're now rooted, and you have recovery.
NOTE: If you have no idea how to use fastboot, then you can use QuickIMG. It lets you flash .IMGs very easily without needing to use any commands. Do however read the instructions provided before you use it.
It's also a good idea to learn how to get out of a sticky situation in case something goes wrong. If you want to be on the safe side when testing kernels, hotboot, or boot an IMG/kernel instead of flashing. Once you see that the kernel is indeed working, and you're not experiencing any bootloops or red LED blinking, then you can safely flash it to disk.
Note: Hotbooting means that the device will only boot the kernel once, so it doesn't really flash it to the device. Flashing a kernel writes it to the device, making it permanent until you replace it by flashing a different kernel yourself.
jaime4272 said:
is it 5.1 or 5.1.1?
Click to expand...
Click to collapse
5.1.X
Klaos3000 said:
The quick way to root any ROM, including the newly released 5.1.1 is, if you have an unlocked bootloader:
- Hotboot any custom kernel with a recovery (fastboot)
- Flash SuperSU
- Reboot
If you want CWM/TWRP:
- Flash NUT's Dual Recovery kernel through fastboot
- Reboot
You're now rooted, and you have recovery.
NOTE: If you have no idea how to use fastboot, then you can use QuickIMG. It lets you flash .IMGs very easily without needing to use any commands. Do however read the instructions provided before you use it.
It's also a good idea to learn how to get out of a sticky situation in case something goes wrong. If you want to be on the safe side when testing kernels, hotboot, or boot an IMG/kernel instead of flashing. Once you see that the kernel is indeed working, and you're not experiencing any bootloops or red LED blinking, then you can safely flash it to disk.
Note: Hotbooting means that the device will only boot the kernel once, so it doesn't really flash it to the device. Flashing a kernel writes it to the device, making it permanent until you replace it by flashing a different kernel yourself.
Click to expand...
Click to collapse
The way for locked bootloader not for unlocked .
Anyway, anyone tested it ?
How about using the prf (pre rooted firmware) tool for locked bootloader?
Sent from my C6833 using Tapatalk
ejhayanchorez said:
How about using the prf (pre rooted firmware) tool for locked bootloader?
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
I Didn't see a pre-rooted firmware, that's why i put this guide, if someone can do it and upload the firmware that's would be awesome .
hi there. I just want to say that after following your guide I could not get in to recovery after flashing the 5.1.1 ftf minus the kernel. when turning the phone on it goes straight to normal boot but it doesn't. it goes in to a boot loop. some how it removes dual recovery and can't flash SuperSU there for loosing root and yes I was rooted with dual recovery. could you explain with more details how to please because I did as you said and didn't work
jaime4272 said:
hi there. I just want to say that after following your guide I could not get in to recovery after flashing the 5.1.1 ftf minus the kernel. when turning the phone on it goes straight to normal boot but it doesn't. it goes in to a boot loop. some how it removes dual recovery and can't flash SuperSU there for loosing root and yes I was rooted with dual recovery. could you explain with more details how to please because I did as you said and didn't work
Click to expand...
Click to collapse
Follow this guide : http://forum.xda-developers.com/xpe...ck-rom-5-1-1-lollipop-xperia-z-ultra-t3206107
This guide isn't working on all devices, don't know why.
thanks i'll give it a try
So the OFFICIAL 6.0.1 is already out and this is not the BETA version. It's for consumer release.
So how do you get to this eh?
NOTES: Flashtool can be used for both LB/UB. You won't lose DRM keys or unlock bootloader if you flash via flashtool.
1. Install Flashtool (get it here: http://www.flashtool.net/downloads.php).
2. There is a XperiFirm option there which would allow you to download official FTF files.
3. Navigate your way to Z3 Compact and grab the D5803 version US Variant (since this is configured for GLOBAL-LTE but i might still need to test bands). Or just grab anything you want there as long as it's version: 23.5.A.0.570
3. Flash using flashmode (hit the lightning icon there).
Now there's this "WIPE" Box, you have 2 options!
- Check User data and App logs and hit flash -- this will factory reset phone so you better have a backup!
- Leave them UNCHECKED if you want to retain your apps from your previous STOCK ROM. (might automatically uninstall incompatible apps in the process).
Once it asks for your device to be connected. Do as it says (power down, then hold the vol. down button as you plug the phone in).
-- this should start flashing.
4. After the process you may now boot the phone and there you have it!
-- Things below require unlocked BL --
If you want root, you can use fastboot and TWRP 3.X (I've tested the TWRP version 3.0.2 on the 6.0.1 beta before)
send this command on fastboot:
Code:
fastboot flash recovery <your twrp img here>
and hit enter. It must return 'OKAY'.
Unplug phone then boot into recovery and flash your SuperSU.zip
https://download.chainfire.eu/924/SuperSU/BETA-SuperSU-v2.68-20160228150503.zip
MINE!
Give a link to proper TWRP image please
tRippinthehead said:
Give a link to proper TWRP image please
Click to expand...
Click to collapse
If you have a locked BL, then root and install DualRecovery. There is an excellent thread here on XDA and you'll be on TWRP in no time. It also makes sure you'll have the drivers and flash tool and everything that you'll need for this already configured and ready to go.
If you have an unlocked BL, just go find TWRP and flash through fastboot.
Thanks OP!
P.S. I'm guessing for those with locked BLs, we can use PRFCreator and that FTF from Xperifirm to create a flashable, pre-rooted MM ROM...anyone tried? My Z3c is currently bricked (hopefully fixable) so I can't test at the moment.
Another DEV published a root method, both for the LB and UB:
http://forum.xda-developers.com/z3/general/wip-sony-android-6-0-mm-t3337357/page1
Keep in mind that that method was used for the BETA version of the rom, but yeah it's more likely that it would work with the consumer release. I'll update the OP once I relock my BL and successfully gain root with it.
The UB method there has the same effect as mine
I could not get root with the method, i would get boot img failure on flashing superSU in twrp with unlocked BL but to solve the issue i just flashed the advanced kernel for 6.0.1 and superSU flashed fine..not sure if anyone else is having this problem but this method did not work for me.
Do I keep root with locked bootloader with this method ?
Title of this topic is confusing, it seems that you need BL unlocked to get root.
hayatesan said:
Do I keep root with locked bootloader with this method ?
Title of this topic is confusing, it seems that you need BL unlocked to get root.
Click to expand...
Click to collapse
No you will lose root if you flash ftf on locked BL, you will need to root again using whichever method you used previously. If you flash an ftf file on ANY bootloader locked or unlocked it resets your phone to the contents of the ftf file.
Fictional Reality said:
No you will lose root if you flash ftf on locked BL, you will need to root again using whichever method you used previously. If you flash an ftf file on ANY bootloader locked or unlocked it resets your phone to the contents of the ftf file.
Click to expand...
Click to collapse
And which is the method to root this version with BL??
hv6478 said:
P.S. I'm guessing for those with locked BLs, we can use PRFCreator and that FTF from Xperifirm to create a flashable, pre-rooted MM ROM...anyone tried? My Z3c is currently bricked (hopefully fixable) so I can't test at the moment.
Click to expand...
Click to collapse
I'm giving it a try so I'll let you know.
EDIT: Admittedly I haven't got a clue how to use prfcreator but I tried and whilst it flashed there was no root or recovery.
2nd EDIT: XDR doesn't work on MM yet. I'll give TWRP a try.
TWRP 3.0.2 for Z3C https://dl.twrp.me/z3c/twrp-3.0.2-0-z3c.img.html
Buleste said:
I'm giving it a try so I'll let you know.
EDIT: Admittedly I haven't got a clue how to use prfcreator but I tried and whilst it flashed there was no root or recovery.
2nd EDIT: XDR doesn't work on MM yet. I'll give TWRP a try.
TWRP 3.0.2 for Z3C https://dl.twrp.me/z3c/twrp-3.0.2-0-z3c.img.html
Click to expand...
Click to collapse
Nice that sounds promising, at least it worked with the .zip that you created!
Which version of SuperSU are you using?
Thanks,
hv
hv6478 said:
Nice that sounds promising, at least it worked with the .zip that you created!
Which version of SuperSU are you using?
Thanks,
hv
Click to expand...
Click to collapse
I'm using BETA-SuperSU-v2.71-20160331103524.zip
However I was looking at the PRFCreator thread and it looks like if you add Recroot v2 as the SuperSU it should work. Not sure if it will give a recovery though.
EDIT: Okay. Didn't install the SuperSU binary properly but Kingroot could install the root though. Tried to remove it and replace with SuperSU and got a bootloop. However I have a cunning plan.
Xperia Z3 Compact - UB
I could not get TWRP recovery with the fastboot method.
I tried to install several "recoverys" but none are installed.
Help me please.
Buleste said:
I'm using BETA-SuperSU-v2.71-20160331103524.zip
However I was looking at the PRFCreator thread and it looks like if you add Recroot v2 as the SuperSU it should work. Not sure if it will give a recovery though.
EDIT: Okay. Didn't install the SuperSU binary properly but Kingroot could install the root though. Tried to remove it and replace with SuperSU and got a bootloop. However I have a cunning plan.
Click to expand...
Click to collapse
I love the sound of progress!
rvnlvrz said:
So the OFFICIAL 6.0.1 is already out and this is not the BETA version. It's for consumer release.
So how do you get to this eh?
NOTES: Flashtool can be used for both LB/UB. You won't lose DRM keys or unlock bootloader if you flash via flashtool.
1. Install Flashtool (get it here: http://www.flashtool.net/downloads.php).
2. There is a XperiFirm option there which would allow you to download official FTF files.
3. Navigate your way to Z3 Compact and grab the D5803 version US Variant (since this is configured for GLOBAL-LTE but i might still need to test bands). Or just grab anything you want there as long as it's version: 23.5.A.0.570
3. Flash using flashmode (hit the lightning icon there).
Now there's this "WIPE" Box, you have 2 options!
- Check User data and App logs and hit flash -- this will factory reset phone so you better have a backup!
- Leave them UNCHECKED if you want to retain your apps from your previous STOCK ROM. (might automatically uninstall incompatible apps in the process).
Once it asks for your device to be connected. Do as it says (power down, then hold the vol. down button as you plug the phone in).
-- this should start flashing.
4. After the process you may now boot the phone and there you have it!
-- Things below require unlocked BL --
If you want root, you can use fastboot and TWRP 3.X (I've tested the TWRP version 3.0.2 on the 6.0.1 beta before)
send this command on fastboot:
Code:
fastboot flash recovery <your twrp img here>
and hit enter. It must return 'OKAY'.
Unplug phone then boot into recovery and flash your SuperSU.zip
https://download.chainfire.eu/924/SuperSU/BETA-SuperSU-v2.68-20160228150503.zip
Click to expand...
Click to collapse
It doesn't work, I have trying out for a while, but fastboot doesn't flash anything
hv6478 said:
I love the sound of progress!
Click to expand...
Click to collapse
We have progress of sorts.
With prf creator add superSU and create the prerooted ROM.
In TWRP Wipe everything but SDcard and OTG
Install pre rooted ROM
Then Install RICDefieat.zip, byeselinux_flashable.zip, and BusyBox-v1.24.1-Stericson.zip
Power off the phone.
Open Flashtool
Load ftf of .570 and check the Exclude System box and flash the phone
Install TWRP using Z3C_MM_TWRP_Recovery_V2_By_Serajr
And that should be it.
Managed to get everything working bar the TWRP but I think that was my fault.
A download file of everything you need bar the ROM.
Buleste said:
We have progress of sorts.
With prf creator add superSU and create the prerooted ROM.
In TWRP Wipe everything but SDcard and OTG
Install pre rooted ROM
Then Install RICDefieat.zip, byeselinux_flashable.zip, and BusyBox-v1.24.1-Stericson.zip
Power off the phone.
Open Flashtool
Load ftf of .570 and check the Exclude System box and flash the phone
Install TWRP using Z3C_MM_TWRP_Recovery_V2_By_Serajr
And that should be it.
Managed to get everything working bar the TWRP but I think that was my fault.
A download file of everything you need bar the ROM.
Click to expand...
Click to collapse
Worked?
marlontravagli said:
Worked?
Click to expand...
Click to collapse
It seems to be working for me at the moment. Even TWRP.
Edit: TWRP is unstable and sometimes becomes unavailable . If that happens just find SGP621-RICDefeat.zip to enable R/W again and reinstall.
Buleste said:
We have progress of sorts.
With prf creator add superSU and create the prerooted ROM.
In TWRP Wipe everything but SDcard and OTG
Install pre rooted ROM
Then Install RICDefieat.zip, byeselinux_flashable.zip, and BusyBox-v1.24.1-Stericson.zip
Power off the phone.
Open Flashtool
Load ftf of .570 and check the Exclude System box and flash the phone
Install TWRP using Z3C_MM_TWRP_Recovery_V2_By_Serajr
And that should be it.
Managed to get everything working bar the TWRP but I think that was my fault.
A download file of everything you need bar the ROM.
Click to expand...
Click to collapse
ok...this sims to be right, thanks
superpipo said:
ok...this sims to be right, thanks
Click to expand...
Click to collapse
It seems that updating busybox to 1.24.1 stericson stops R/W permissions and the ability to access TWRP however it is easily fixed.
Hi.
I have a Xperia Tablet Z2 (SGP521) with Android 6.0.1 (build 23.5.A.0.570) without root, and I would like to make the root, how can I do?
Thanks in advance.
I'm sorry for my english.
Only way is:
- come back to original rom 4.4.2, using Flashtool http://www.flashtool.net/index.php
- root using Flashtool,
- flash TWRP http://nut.xperia-files.com/path/XZDualRecovery/Older_Releases/XZDualRecovery_2.8.21
- flash a prerooted rom using TWRP 2.8.21, http://forum.xda-developers.com/xperia-z2-tablet/general/prerooted-zip-vmo-ru-ua-kz-t3362729
- flash TWRP 3.0 can download from here http://forum.xda-developers.com/z3/general/wip-sony-android-6-0-mm-t3337357 Recroot combined v 4
To go on recovery, at the vibration when you turn on your device, push volume down button and recovery will start
I made it all working fine
lorisino said:
Only way is:
- come back to original rom 4.4.2, using Flashtool http://www.flashtool.net/index.php
- root using Flashtool,
- flash TWRP http://nut.xperia-files.com/path/XZDualRecovery/Older_Releases/XZDualRecovery_2.8.21
- flash a prerooted rom using TWRP 2.8.21, http://forum.xda-developers.com/xperia-z2-tablet/general/prerooted-zip-vmo-ru-ua-kz-t3362729
- flash TWRP 3.0 can download from here http://forum.xda-developers.com/z3/general/wip-sony-android-6-0-mm-t3337357 Recroot combined v 4
To go on recovery, at the vibration when you turn on your device, push volume down button and recovery will start
I made it all working fine
Click to expand...
Click to collapse
Hello,
why i need something "flash" after rooting? i dont understand what is the "flash" do?
Paja LT said:
Hello,
why i need something "flash" after rooting? i dont understand what is the "flash" do?
Click to expand...
Click to collapse
"Flash" means installing something to the internal memory.
You need to go back to a "rootable" version and after having your terminal rooted you can flash the latest rooted ROM.
Following the instructions on this thread https://forum.xda-developers.com/xp...lipopprerooted231a128z2-tabletsgp511-t3100821 I suggest you:
Flash the Lollipop 23.1.A.1.28 firmware with Flashtool;
Unlock the bootloader (not sure it is strictly needed but better avoid potential issues) with Flashtool (use the Sony website to get the unlock code as the automatic retrieval of Flashtool did not work for me);
Root using the script mentioned in the thread;
Flash the custom recovery;
Flash the rooted 6.0.1 ROM.
maxlnc said:
"Flash" means installing something to the internal memory.
You need to go back to a "rootable" version and after having your terminal rooted you can flash the latest rooted ROM.
Following the instructions on this thread https://forum.xda-developers.com/xp...lipopprerooted231a128z2-tabletsgp511-t3100821 I suggest you:
Flash the Lollipop 23.1.A.1.28 firmware with Flashtool;
Unlock the bootloader (not sure it is strictly needed but better avoid potential issues) with Flashtool (use the Sony website to get the unlock code as the automatic retrieval of Flashtool did not work for me);
Root using the script mentioned in the thread;
Flash the custom recovery;
Flash the rooted 6.0.1 ROM.
Click to expand...
Click to collapse
Thank you for the reply, as i understant the devise will work fine without any flashing? "Flash" means something installing in internal memory, but I do not understand why should I do it ?
please help me to root devise.
flashTool writing: "ERROR Illegal key size or default parameters."
That can i do?
Andriusss said:
please help me to root devise.
flashTool writing: "ERROR Illegal key size or default parameters."
That can i do?
Click to expand...
Click to collapse
You cant make the root with the flashtool! Copy the SuperSu (download newest zip) on your tablet (anywhere) and proceed with this: "TabZ2-lockeddualrecovery2.8.21-RELEASE.installer" you already downloaded from the tutorial. when you launch the "install.bat", the tablet will be rooted and twrp installed it auto-boot into twrp and now you can isntall your copied supersu zip then you can proceed with the tutorial
Got it fixed. In my first CWM Backup from the Dualrecovery Package (installer) was a working boot.img All fine now!
Hi
Xperia Tablet Z LTE version
Android version : 5.1.1 / kernel version : 3.4.0-perf-gbccb33a / Platform : 32bits / Build number : 10.7.A.0.228
I've still have stock firmware so I don't have option to boot to recovery mode. I've installed flashtool, bootloader is unlocked, device is rooted with kingrot. I've tried to install TWRP with offical app but without success I've tried to install TWRP manually, but also without success.
C:\Users\szm>adb root
restarting adbd as root
C:\Users\szm>adb wait-for-device
C:\Users\szm>adb push C:\twrp\twrp-3.0.2-0-pollux.img /tmp/twrp.img
failed to copy 'C:\twrp\twrp-3.0.2-0-pollux.img' to '/tmp/twrp.img': Permission denied
C:\Users\szm>adb push C:\twrp\twrp-3.0.2-0-pollux.img /tmp/twrp.img
failed to copy 'C:\twrp\twrp-3.0.2-0-pollux.img' to '/tmp/twrp.img': Permission denied
Click to expand...
Click to collapse
I don't know what do do next. I don't want do do something stupid and brick device. I want to install custom rom from here:
https://forum.xda-developers.com/xp...pment/rom-resurrection-remix-n-6-0-0-t3748092
I'm thinking about flashing kernel with TWRP but don't know where to find correct one, old topics are with old firmware . Any advice?
EDITED:
I wasn't understanding the instructions. Firmware kernel doesn't block the TWRP. If someone has similiar problem to mine with TWRP. Just follow steps from this topic:
https://forum.xda-developers.com/xp...de-tutorial-sony-xperia-tablet-z-lte-t3392831
Solution works with different roms and versions of TWRP. TWRP for me booted after installation so there was no need to use buttons. I'm now happy user of android 8.1 on Xperia tablet Z. Thread can be deleted or closed now.