For those in search of a S Pen holder - Galaxy Note Pro 12.2 Accessories

Could not find anything thats ready made for the S Pen and didn't quite like the G2 solution sooo...here it goes:
Get yourself a Lamy Safari, I had a couple of those at hand, they can be found pretty cheap, take out the nib and the ink feed, it comes out from the front. If you're not going to use it again, pull it out with pliers, so much easier. Drill, from the back side, the inside rib that holds the ink feed with a 7mm drill (thats 9/32 approx. but 1/4 inch will do). From the front side, there is a small piece inside of the ink feed holder that makes sure the ink feed system slides in one-way, got to get rid of that. I used a 6mm (15/64") drill from the front, wiggled it a little, that did it.
The great thing is that the inside of the back part of the LAMY case has some ribs that the S Pen slides right into and those ribs hold it in place and prevent the S Pen from twisting, they hold pretty tightly too.
Here are some pictures, it feels really good for those who are wondering:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hope it helps!
Forgot: I am also investigating a solution for the button, will let you know if I find one thats eloquent.

I ended up buying this:, but I got a crazy deal and it was only $22.99, I think because it was on clearance for some reason. I would have never paid $39.99 and would of looked for something like your solution
http://www.bestbuy.com/site/wacom-b...bled-tablets-black/8282053.p?id=1218868675100
the Lamy on amazon http://www.amazon.com/Lamy-Safari-Fountain-Pen-Charcoal/dp/B0002T401Y is $20.98, so I guess its better than paying $40.00 for the bamboo, but with the bamboo, if you got a good deal, you have the side button. Now I have 2 pens, the one included, and the bamboo, so its kind of nice when I need someone else to draw on the screen along with me

Related

Silicone Skin X Rubberized Protector

Hi, i´m new here and I have a doubt.
My old phone was a smt5600 but the first thing a become very used was the joystick.
So i find this silicone skin with joystick(central button) protector but is more ugly than the devil and maybe brings more trouble than protect
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
the second option is this
Black Rubberized Protector
the second option, ins´t hard, so I liked more
if the first one really protect my front buttons I will use.
For screen I will use bestskinsever and for the keyboard I need find something to protect too if possible.
If anyone can give some opinions I will like
Sorry for the english or noob question.
tks
I use something just like your second photo. I like it alot...it makes my phone a tad thicker, but the black looks nice and the grippy surface is great. It doesn't slip out of your hand so much.
Yea, me too. I use a blakc "rubberized crystal" cover that i got from this website
www.pocketsolution.com
and it works fantastic. it does make the phone a littl ebit bigger, but the protection that it has is well worth it, ive drpped my phone onto concrete a few times and nothing happened.
it usually runs around like 14 bucks or so, but i have codes for discounts on pocketsolution.com for free shipping and for like 20% off. send me a pm if you are interested.
That link doesn't work. It's an empty URL with ads and stuff.
...but you can get those black grippy covers on E-Bay for like five bucks. Mine was ten shipped. Not too bad for what you get! Just search for "8525 black case" or something.
tks, I bought the second option.

New York Times branded Bookmobile Cover

I might be one of the few guys around here who remembers bookmobiles as a kid, and since one of the main reasons I bought the Nook Tablet was to use as a reader this cover really appealed to me.
I found it at our local B&N while I was returning two other covers I tried and didn't like. They had just gotten these in and hadn't put them on the shelves yet. Kind of pricey at $40 but I'm happy with it. It has the nice secure clips that the BN branded covers have.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
That looks great. I love covers that make it look like a book. It's the best way to carry around inconspicuously. Also great that it has the B&N clips... I don't like a lot of the third party covers that uses the corner straps (kills the esthetics when opened).
thatdude90210 said:
That looks great. I love covers that make it look like a book. It's the best way to carry around inconspicuously. Also great that it has the B&N clips... I don't like a lot of the third party covers that uses the corner straps (kills the esthetics when opened).
Click to expand...
Click to collapse
Thanks! Even though it's not leather it kind of has a weathered look that I like.
I totally agree on the clips. I almost got a Moleskine cover but I don't like the elastic holders in the corners and although I think they work fairly well for my lighter Nook Simple Touch I was worried that with the much heavier Tablet they wouldn't hold it as securely. The B&N clip mount allows you to pop it in and out very quickly.

DIY Band

Since my job is a bit more physical than most. One thing that I ran across is the occasional tap on the Original wrist band that just makes it come off.
Solving that is all of an $8 leather cuff from Amazon and 2 short cuts (from a $200 knife).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Guys with larger wrists, there's not much chance of this coming off. You can also always buy a strip of leather yourself and a few grommet/snaps and make one.
Hey, that thing cuts like butter and is 9 inches of OTF beauty!
As for the mod, this of course renders the heartrate sensor useless, but it looks much better anyway
apallohadas said:
Since my job is a bit more physical than most. One thing that I ran across is the occasional tap on the Original wrist band that just makes it come off.
Solving that is all of an $8 leather cuff from Amazon and 2 short cuts (from a $200 knife).
Guys with larger wrists, there's not much chance of this coming off. You can also always buy a strip of leather yourself and a few grommet/snaps and make one.
Hey, that thing cuts like butter and is 9 inches of OTF beauty!
As for the mod, this of course renders the heartrate sensor useless, but it looks much better anyway
Click to expand...
Click to collapse
thats actually a very smart idea for those who dont mind wearing cuffs, and have the same issue, may i ask you do you find that the screen gets scratched easy i just bought mine and im wondering if its worth me buying one of those screen protectors

Incipio Area Case Review!

So I decided to try out this new Incipio case called the Area. I went with the frosted version because it's a cool contrast for the black phone, although I like the case so much I might go and try out the black version of it as well!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So when I first got the case, it was a little beefier than I thought from the pictures on Amazon...but it's not a bad thing. The corners are reinforced so that it's definitely protective if it falls. I actually dropped it off my counter in the bathroom and it landed on the floor and protected it fine! (I never drop my phones, so I was lucky I had a beefier case on it this time!!)
The buttons are awesome! They aren't shaped like buttons, but rather, each button has a little raised mark of what it does. The sides of the case are completely flat, but once you're near a button, you feel the outline of it's shape. And on top of it, they're really easy to press, which is hard to find in a gel/tpu case like this.
The frost matte back feels cool, and all of the cutouts are shaped perfectly.
I've got the spigen screen protector on it that wraps around the curve of the device, and there's no issue with this case pulling it up on mine, so that's another plus.
All in all, this is an awesome case for the price.
Amazon link:https://www.amazon.com/gp/product/B01EBFD1W8/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
This case isn't on Incipio website. I believe it's a bit of branding trickery. I ordered one anyways to check it out.

Any good travel cases out there?

Im looking for a travel case/pouch/bag that fits the Tab S4 with Keyboard Cover and S-Pen attached. All I can find are Ipad-cases that are 4:3 format, and I want a snug 16:10 format case in this typical design:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any recommendations? Dont want a case with 4 cm to spare on the sides of the tablet haha.
https://smile.amazon.com/Infiland-M...sr=1-12-spons&keywords=tab+s4+pogo+case&psc=1
Looking for the same thing. Have tried a number of sleeve cases but everything is too small or too big. Yet to find the perfect one.
I think this one may fit well. May still have some wiggle but would think it should be pretty close to size of the Tab.. I actually have a larger one that I use for my Surface Pro 5 and tried it with my Tab. It definitely has room to spare but the tab doesn't move much. On both of these, the interior has a fleece lining that should keep the Tab from sliding too much while inside. I would
https://www.amazon.com/tomtoc-10-5-11-Compatible-Microsoft-Keyboard/dp/B01KHJOXOM?ref_=w_bl_hsx_s_pa_web_18073239011
DanielLee5 said:
Cultofmac posted a great review on the best cases, I personally like one from Logitech, I will atach a pic above the post. Different travel blogs offer very nice reviews on the latest models, I would try to seek one using Google search by pictures.
Click to expand...
Click to collapse
I'd love one like the pic. Do you have a link?
hello, I think the 4:3 iPad covers are a very convenient model, but I have a different-sized iPad. The last time I bought a business flight ticket to Kwajalein this case fit well with my design and the trip as a whole. It is desirable that the cover is loosely held, thanks to which the tablet will be stored longer

Categories

Resources