[CM12][5.0.2][Unofficial][Dior][Stable] Optimized CM 12 for QCOM Redmi Note 4G - Redmi Note Android Development

Optimized CyanogenMod 12 Android 5.0.2 Lollipop for the Redmi Note 4G(QCOM) brought to you by haoyangw
NOTE: This is for the QCOM variant of the Redmi Note, otherwise known as Redmi Note 4G, and NOT the MTK variant of the Redmi Note. In short, this ROM will NOT work on the MTK variant of Redmi Note 4G
NOTE: GApps is NOT provided, use any GApps package you can find. I would recommend Open GApps for Lollipop(link below).​
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Version Number explanation is in the #2 post, changelog and device tree branches for my github repositories explanation is listed in the #3 post
Comment your reviews below or even better, PM me as I won't be regularly monitoring this thread. Thanks again! You will be listed in the credits too ​
Downloads
ROMs
All ScarletRice builds and addons(AndroidFileHost)
All ScarletRice builds and addons(BasketBuild)
ScarletRice selected builds and addons(XDA)
I don't have the time to link specific builds everytime there is a new one anymore, so unfortunately you all have to go into XDA downloads or AndroidFileHost folder and download the latest one. So sorry!
Recoveries(compiled by me )
CWM, Philz touch and twrp recoveries(AndroidFIleHost)
Addons(includes my custom kernels So keep an eye on it)
Addons(AndroidFileHost)
Addons(BasketBuild)
XDA Downloads(Addons and ROMs)
Older downloads:
ScarletRice Beta 0.1
ScarletRice Alpha 0.02: https://mega.co.nz/#!40cXxKQL!Dd-pk41oJOPJbhLILLGnS9yAE09ly6nKIIfgRzLCpak
ScarletRice Beta 0.1 AndroidFileHost mirror
ScarletRice Alpha 0.01: https://mega.co.nz/#!EgN1lIxY!n7f-o9bujoh6eAu0H8iuaiiGrQ1fG3OCxYoodAyuLSA
The battery life so far on this ROM is amazing! It doesn't face any kind of drain issues so far, except maybe for the infamous Google Play Services wakelocks. To quote:
Swordsman0815 said:
Battery life seems to be amazing... I am off the charger for over 12hrs and still have around 46% of charge left
Click to expand...
Click to collapse
Well good/bad battery life is actually really subjective, some people might have higher standards due to their past experience etc so it all depends! Try it out yourself and see
Not working:
Cast screen/Screen mirroring
FM Radio
Compass
Back Camera and front camera video Fixed now
Buggy power detection Fixed
Flashing red borders(chrome only) Fixed
Working:
Back and Front camera(video + photo)(wipe dalvik if doesn't work)
Wifi
Headphones
Touch
Auto brightness
Gyroscope
Alarms
Location
Double tap 2 wake(built into ROM zip's kernel and my custom kernels) Removed due to bugs
Anything else
Installation
Download the ROM from the link above
Download GApps package for Lollipop(Recommended: OpenGapps, for 4.4+ and all architectures)
Download any addons/custom kernels from links above or anywhere else
Put the zip files on your SDCard
Reboot in Recovery(choose one of the 3 above if you wish )
Wipe Data / Factory Reset(ONLY IF you are coming from another ROM/upgrading to beta 0.2.x to get working camera)
Recommended: Wipe dalvik-cache
Select "Install zip from SDCard"
Choose CM12 zip file
Select "Install zip from SDCard"
Choose GApps zip file
Optional: Select "Install zip from SDCard"
Optional: Choose addon/kernel zip
Reboot system
Reporting bugs
If you have found a bug, make sure you fill up a form here: Google Form: Bug reporting This allows me to easily track all bugs reported without scanning the whole thread. Do make SURE that you fill in a VERY detailed description! And don't forget logs! For a tutorial on how to get logs, here you go! Log tutorial Of course, feel free to still report bugs here as I will be monitoring this thread But you MUST fill up a form, reporting on XDA is optional
Sources
Manifest
For those who would like a shortcut to sync all the neccessary repos to build stable cm12, just download/copy the contents of this file into .repo/local_manifest: Local manifest xml and the next time you repo sync everything will be there Then just 'lunch cm_dior-userdebug' and 'make -j4 otapackage'
Manually
I've finally given up making my own trees and fixing the annoying bugs in Xiaomi's kernel sources, so here are all the working tree/sources brought to you by our awesome devs! I take no credit for this! GO AND THANK THEM!
Edit: I've made some minor updates and fixes to the trees, but still credit goes to them!
Updated trees(updated by me but originally created by the following devs)
Device tree
Kernel source
Vendor tree(a.k.a. prebuilt/proprietary blobs tree)
Original trees:
@Silesh.Nair's device tree
@Silesh.Nair's vendor tree
@audahadi's kernel source
@stane1983's kernel source
I've uploaded the device tree I used to compile twrp to my device tree above, the branch name is 'twrp'. It's based on syhost's outdated twrp device tree, with problematic flags removed to fix bugs and also translated back into english, so there you go!
NOTE: Currently this device tree is ONLY for compiling CM12, you can face all kinds of build errors if you compile CM11 with it. For example, you will not be able to compile sepolicy in the device tree. You have been warned. Have fun building
Credits
CyanogenMod
XDA
syhost(for his twrp device tree)
Stane1983(for his first working trees)
Silesh.Nair(for his updated trees)
sm_94(for his suggestions on fixes)
And everyone else who contributed logcats and findings and worked hard for the better of all Note 4G users. Thanks!
XDA:DevDB Information
ScarletRice, ROM for the Xiaomi Redmi Note
Contributors
haoyangw
Silesh.Nair
sm_94
stane1983
sadlmadl(Contributed best and most logs and reports)
Swordsman0815(Contribute working/not working reports and logs )
@suhasgta(contributed logs, suggestions and reports )
And all others who contributed logs and reports! Thanks A LOT!
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Created 2015-03-17
Last Updated 2015-11-29

Version numbers
Version Number explanation
There will be 4 naming conventions for builds, namely Alpha, Beta, Release Candidate and Stable.
Alpha - Build is NOT tested and may not boot
Beta - Build has been tested and boots up, but there are many device-related issues and bugs
Release Candidate, or RC - Build has been tested and device-related issues and most bugs are fixed
Stable - No more than 3 minor bugs and no performance or battery drain issues(caused by ROM on my side)

Changelog + Github Repos' Branches
Changelog:
1.0
Device:
Fixed front and back camera(photo+video) as well as video playback
ROM:
Optimized with O3 and graphite
Enabled optimizing compiler for ART
Kernel:
Added more cpu governors(total 23)
Added gamma control
Added faux sound control
Added alucard and intelli hotplug
Compiled with O2
Maybe more(can't remember)
0.2.4
Device:
Merged changes from sileshn
Fixed some more webview problems(that were not caused by the previous absence of webview completely)
Added FM blobs, FM radio should work properly now (also means you'll need my new local manifest to sync qcom's fm stuff)
Tweaked media configs, hopefully improves some stuff(but playing youtube videos and the like still not working )
0.2.3.1
ROM:
Fixed superuser
Device:
Fixed google play store crashes
Tweaked button brightness, hopefully it isn't too bright nor dim
Old builds' changelogs:
0.2.3
ROM:
Compiled with user instead of eng, should result in increased performance!
Fixed performance issues! Now it's faster than syhost's cm12.1! You know what that means? if we build for cm12.1, then bam, performance will be faster than a rocket! And did I mention Justarchi optimizations and graphite flags?
Many vulnerability fixes like the new Serialization vulnerability
Device:
Bright button lights should now be fixed No light at all Sorry!
Location should be working properly now, without relying on Xiaomi's partners like Qualcomm
Fixed annoying flashing red borders ONCE AND FOR ALL!
0.2.2
Clean install(i.e. with factory reset required for working front camera)
ROM:
Fix Gapps problems(e.g. Play store and google keyboard crashes) by removing system jar compression tweak
Improved performance a little
0.2.1
ROM:
Fix prebuilt WebView that caused browser crashes
Add some missing blobs to increase performance
0.2.0
ROM:
Integrate home button fix
Upstream fixes(most notably stagefright vulnerability fix)
Use prebuilt WebView
System jars 0 compression(store only), but causes problems
Add Open Camera as system app
0.1
ROM:
Finally boots
Fix front camera
Device:
Use Silesh.Nair's device tree to fix problems and make ROM boot
Custom kernel:
V1.2.4:
Updated intelliactive and intellidemand to faux's latest sources, no longer using some outdated files that I got because of laziness So intelliactive is finally working properly(no reboot), and also better performance/battery etc
Added intelli hotplug driver, do check it out!
Updated simple and simpleondemand gpu governors, but they still don't work So do AVOID them!
V1:
Add intelliactive and smartmax governors
Add SIO and ZEN I/O schedulers
Experimental fix for back camera
Github Repository Branch Explanations:
Kernel source repo
cm-12.0: stock cm12 kernel without extra governors and I/O schedulers
cm-12.0-custom: CM12 custom kernel with extra governors and I/O schedulers
stock: Original kernel source from Xiaomi with only fixes for compilation errors
cm-12.0-wip: latest fixes/additions for cm12 that may not work/compile successfully
Upcoming(when it appears on the kernel source repo, cm12.1 is coming ):
cm-12.1: CM12.1 custom kernel with extra governors and I/O schedulers
cm-12.1-custom: stock cm12.1 kernel without extra governors and I/O schedulers
wip-cm12.1: latest fixes/additions for cm12.1 that may not work/compile successfully

Hi, I tried your rom just now on my Redmi Note 4G but it doesn't boot at all.

I wouldn't mind being a tester! I'm installing now and I'll see how it works.

fix
what about camera. fixed or not yet

It's stuck on the MI boot screen.

Finaly
thanks haoyangw for this thread. I would to participate but I just a noob and don't have skill about devs . I just follow and subscribe this thread, hope you can fix any problem about this devices. :good:

i can also help testing,i have min knowledge about what a rom is and logcat.

robreyes07 said:
Hi, I tried your rom just now on my Redmi Note 4G but it doesn't boot at all.
Click to expand...
Click to collapse
Hi, can you send me a logcat please? Or install LiveBoot by ChainFire through recovery and post all the errors you see printed. Thanks a lot! Sorry if the ROM doesn't boot

Good to see someone is working on CM12 for our phone. I tried CM12 syhost version and it's awesome but camera doesn't work and I need it. If you manage to get camera to work that would be awesome.

Thanks for your work. You may want to check the source code for the official cm12 version of the htc desire 816. It has the same gpu/cpu combination so there must be some similarities.

What is the point of this thread when the rom doesn't even boot

i think,
shyampareek said:
What is the point of this thread when the rom doesn't even boot
Click to expand...
Click to collapse
I didn't know but i hv subscribe

shyampareek said:
What is the point of this thread when the rom doesn't even boot
Click to expand...
Click to collapse
The point is to encourage someone to work on device. Right now it gathers little to no interest at all.

shyampareek said:
What is the point of this thread when the ROM doesn't even boot
Click to expand...
Click to collapse
Point is to give support to developer, or this thread will die. I think u shouldn't be on this forum, so ungrateful

haoyangw said:
Hi, can you send me a logcat please? Or install LiveBoot by ChainFire through recovery and post all the errors you see printed. Thanks a lot! Sorry if the ROM doesn't boot
Click to expand...
Click to collapse
Sure, maybe this weekend kind of busy this workdays.

robreyes07 said:
Hi, I tried your rom just now on my Redmi Note 4G but it doesn't boot at all.
Click to expand...
Click to collapse
Nemado said:
Thanks for your work. You may want to check the source code for the official cm12 version of the htc desire 816. It has the same gpu/cpu combination so there must be some similarities.
Click to expand...
Click to collapse
Yeah I thought of that, I copied some bits from the desire 816 device tree for Redmi Note 4G. I've tried building recovery with my sources and device tree and the recovery works perfectly, so I think it must be something in the ROM that is the problem. I'll need a logcat for tracking the malfunctioning part.

robreyes07 said:
Sure, maybe this weekend kind of busy this workdays.
Click to expand...
Click to collapse
Thanks a lot! Hope I can get this ROM working soon, then our beloved device will get Lollipop sweetness.

Have you tried to compile kernel that xiaomi relased for our device?

Related

[ROM][v500][AOSP][5.1.1] Android 5.1.1 Lollipop - 20151012 - LMY48W (CLOSED)

AOSP - Android 5.1.1 - LMY48W​
This is a build of pure AOSP Android 5.1.x Lollipop, the goal is to have a pure AOSP rom, so it is not the objective of this project to include any functionality that is not native to Android AOSP.
THIS PROJECT WILL NOT HAVE MORE UPDATED​
Download:
ROM: https://www.androidfilehost.com/?fid=24052804347836083
Gapps: http://opengapps.org
Instructions:
Install TWRP (http://forum.xda-developers.com/lg-g-pad-83/orig-development/recovery-official-twrp-t3135886)
Boot into recovery and flash the zip of ROM and Gapps.
For Root flash SuperSU (http://forum.xda-developers.com/showthread.php?t=1538053)
Source:
https://github.com/AdrianoMartins/aosp_manifest
To build from source:
Code:
repo init -u https://github.com/AdrianoMartins/aosp_manifest.git -b android-5.1
repo sync
. build/envsetup.sh
lunch aosp_v500-userdebug
make -j4 otapackage
Credits:
The kernel is base on @ckret, @Rick Roll, @franciscofranco and @fefifofum kernel source.
The device repo for the newer version is based on the @fefifofum source.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
XDA:DevDB Information
AOSP Android 5.1 Lollipop, ROM for the LG G Pad 8.3
Contributors
adrianom
Source Code: https://github.com/AdrianoMartins/
ROM OS Version: Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2014-11-15
Last Updated 2016-02-07
Changelog:
20151012
Update to 5.1.1_r24 (LMY48W)
Several bug fix patches (see github)
Replace some AOSP apps:
Music by Eleven
MusiFX by AudioFX
Update some AOSP apps:
Browser
Launcher
20150823
Performance Improvement
New Kernel (see github)
Fix some problems
Update to 5.1.1_r10 (LMY48J)
20150719
Performance Improvement
New Kernel (see github)
Fix some problems
Update to 5.1.1_r8 (LVY48C)
20150628
Performance Improvement
20150627
Rebase the system based on @fefifofum repo device
Update blobs, kernel and other packages with many patchs (see github)
Update to 5.1.1_r5 (LYZ28E)
20150614
New Kernel (a merge of LG, @fefifofum, @Rick Roll and a my work, it is based on the Stock Lollipop kernel)
Update some blobs from Stock Lollipop
Update Wifi and Bluetooth configuration and firmware
Add OV5693 Camera Sensor Support (I don't tested this, I need someone to test and report)
Other changes to make use of the new kernel and for optimization
20150604
Build with personal toolchain (Basic the Google Toolchain with Cortex-a15 and others optimization flags)
Small patches to Framework (bugfix)
Boot image Bumped
Update to 5.1.1_r4 (LMY48B)
Enable Strict Aliasing, Mthumb-interwork and Graphite optimization flags
20150422
Update to 5.1.1_r4 (LMY47V)
20150419
Some minor memory leaks fixes
New Kernel:
Revert some changes made in 20150314 version
Build with 4.9 A15 Toolchain
Add graphite and cortex-a15 optimization
20150415
Update to 5.1.0_r5 (LMY47O)
Update Adreno Libs (from Mako 5.1)
20150327
Update to 5.1.0_r3
20150314
General Performance Improvement
New Kernel (performance e memory manager improvements)
Update Adreno Libs
20150311
Update to 5.1 version (LMY47D)
Rebuild with google toolchain (more stable)
20150106
New Kernel - Fix Gamma Calibration
20150104
Wifi Update (fix connection and speed problem)
New Kernel (rebuild with new toolchain and update gpu driver)
Updated adreno blobs (from mako lrx22c)
Optimization
20150101
Build with Sabermod Toolchain (4.8.5 with cortex-a15 optimization)
Build with 03 and some optimization flags specific for cortex-a15
Apply patchs from master repo to fix memory leaks
Tweaks to WiFi and Network config
20141227
Fix GPS
Fix bluetooth on secondary user
Enable silent and airplane mode in power button options
Optimization and small fixes
20141221
Update to 5.0.2 (LRX22G)
Optimization
20141205
Update to 5.0.1
Add off mode charger (now charge when the device is off)
Fix sensor instability (rotation)
Fix clock reset at reboot
Enable init.d scripts
Enable knock-on (thanks to @forfivo for the tip)
Fix Google Account Backup/Restore
20141123
Location fix (only with google service)
Update Adreno drivers
Several internal changes to fix and optimization
20141119
Update to Android_5.0_r7
Fix media playback (Youtube and other)
Enable Multiuser Support
Remove MPDecision & Thermald (test to fix random reboot)
Change installation to work with all recovery
20141116
Update to Android_5.0_r6
Fix Wifi, Bluetooth, Internal Storage, Sensors and other
20141115
First release
Old Versions:
2015-08-23: https://www.androidfilehost.com/?fid=24052804347800184
2015-07-19: https://www.androidfilehost.com/?fid=24052804347777166
2015-06-28: https://www.androidfilehost.com/?fid=24052804347766452
2015-06-27: https://www.androidfilehost.com/?fid=24052804347765783
2015-06-14: https://www.androidfilehost.com/?fid=24052804347759924
2015-06-04: https://www.androidfilehost.com/?fid=24052804347756835
2015-04-22: https://www.androidfilehost.com/?fid=96042739161891521
2015-04-19: https://www.androidfilehost.com/?fid=96039337900114132
2015-04-15: https://www.androidfilehost.com/?fid=95916177934542265
2015-03-27: https://www.androidfilehost.com/?fid=95916177934547199
2015-03-14: https://www.androidfilehost.com/?fid=95916177934541801
2015-03-11: https://www.androidfilehost.com/?fid=95916177934540292
2015-01-06: http://d-h.st/5DAl
2015-01-04: http://d-h.st/IUW
2015-01-01: http://d-h.st/rch
2014-12-27: http://www.mediafire.com/download/33f4u3cw3s2ic8g/aosp_v500-ota-eng.adrianomartins_20141227.zip - (mirror)
2014-12-21: http://www.mediafire.com/download/ucbt5fc5qh74dqn/aosp_v500-ota-eng.adrianomartins_20141221.zip
2014-12-05: http://www.mediafire.com/download/9bp40glnlnapmo2/aosp_v500-ota-eng.adrianomartins_20141205.zip
-
That is great news. I can't really help you, and I can't even flash it 'cause I use my Gpad daily as a productivity device, but I'm definitely rooting for you !
Great work! What kernel are you using as a base?
Edit: btw your zip doesn't work.
Thanks very much for your effort. Looking forward to a full working function rom
Some help
I want to help, what i must to do?
Great News, thanks ?
Pretty awsome! I Will test this and edit on how it goes later
Looking at the nonworking wifi and internal storage is top priority for me.
Edit1: Looks pretty cool Its a chance to preview of the UI and under the hood stuff. Pretty much none of the apps work though except calculator and the browser and a few other stuff
Edit2: When I go to TWRP recovery to flash back my backup it runs openrecoveryscript and reboots. I cant get into TWRP itself. Any suggestions on what to do here?
Bronando said:
Pretty awsome! I Will test this and edit on how it goes later
Looking at the nonworking wifi and internal storage is top priority for me.
Edit1: Looks pretty cool Its a chance to preview of the UI and under the hood stuff. Pretty much none of the apps work though except calculator and the browser and a few other stuff
Edit2: When I go to TWRP recovery to flash back my backup it runs openrecoveryscript and reboots. I cant get into TWRP itself. Any suggestions on what to do here?
Click to expand...
Click to collapse
You are using the 2.7 version of TWRP, right? Try send a "adb reboot recovery" from pc in the moment that recovery start, this restart the recovery and go back to normal recovery.
I recommend use TWRP 2.8.
Is this only for gpe?
Sent from my LG-V500 using XDA Premium 4 mobile app
This is for v500.
Looking Forward For Full Fix!
Wow I thought there would be more support for this rom. Sorry I'm one of the useless ones that can offer no help. Hope the cavalry arrive soon
Sent from my Nexus 4 using XDA Free mobile app
When Google releases code this next week or so, then this project will get a huge bump. Great start so far though. I can feel the enthusiasm.
adrianom said:
Not working:
Wifi, Bluetooth, GPS, Internal Storage, Sensors and other
Click to expand...
Click to collapse
wifi etc. are propably due to new sepolicy
look into the sources of mako and other devices
maybe you can figure it out
https://android.googlesource.com/device/lge/mako/+/android-5.0.0_r6
https://android.googlesource.com/device/lge/mako/+/3370c7953eb2d1559f5c66a2f6010573d7fe9b9a
they put everything into "sepolicy"
bluetooth, wifi, storage. etc.
you have to fix it up for the awifi
ckret said:
wifi etc. are propably due to new sepolicy
look into the sources of mako and other devices
maybe you can figure it out
https://android.googlesource.com/device/lge/mako/+/android-5.0.0_r6
https://android.googlesource.com/device/lge/mako/+/3370c7953eb2d1559f5c66a2f6010573d7fe9b9a
they put everything into "sepolicy"
bluetooth, wifi, storage. etc.
you have to fix it up for the awifi
Click to expand...
Click to collapse
CM Team is working on an universal sepolicy for all qcom devices. For now you need to set selinux as permissive.
https://github.com/victormlourenco/...mmit/5a20f7d373d61672a4ab3bbe7a9111fb3cbe651f
Rick Roll said:
CM Team is working on an universal sepolicy for all qcom devices. For now you need to set selinux as permissive.
https://github.com/victormlourenco/...mmit/5a20f7d373d61672a4ab3bbe7a9111fb3cbe651f
Click to expand...
Click to collapse
ckret said:
wifi etc. are propably due to new sepolicy
look into the sources of mako and other devices
maybe you can figure it out
https://android.googlesource.com/device/lge/mako/+/android-5.0.0_r6
https://android.googlesource.com/device/lge/mako/+/3370c7953eb2d1559f5c66a2f6010573d7fe9b9a
they put everything into "sepolicy"
bluetooth, wifi, storage. etc.
you have to fix it up for the awifi
Click to expand...
Click to collapse
Yes, I am upload a version with some changes to sepolicy and boot set to permissive, I get almost all working.
New Version:
Download: http://www.mediafire.com/download/25u8mp2ixstk6lr/aosp_v500-ota-eng.adrianomartins_20141116.zip
Changelog - 20141116:
Update to Android_5.0_r6
Fix Wifi, Bluetooth, GPS, Internal Storage, Sensors and other
Great initiative, can't wait for lollipop to become "stable" on the g pad!

[ROM][6.0.1] Cyanogenmod 13.0 N7100 Build 15

Cyanogenmod 13.0 for N7100
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Working:
- OpenGL (CPU rendering)
- MALI blobs (GPU rendering)
- HWComposer and MALI R3P2 drivers
- Rotation
- Camera
- WiFi
- Bluetooth
- NFC (Android Beam)
- Sensors (ALL!)
- Vibration
- Home Button wake
- RIL
- GPS
- Signal Icon
- Soft Keyboard on first boot
- Mouse pointer
- Pin lock
- External media mounting
Not working
- Some video apps have issues with video playback(You might want to use chrome dev)
DO NOT POST BUG REPORTS WITHOUT LOGCAT OR STEPS TO REPRODUCE BUG
(some bugs also require dmesg and/or (last_)kmsg)
Downloads:mega.nz
RomHut
MD5: c43910241c33dcd3325f46fc4e50179c
gapps:http://opengapps.org/
Install gapps right after rom (dont exit recovery) and dont wipe cache/dalvink/data before going thru gapps setup
Based On Android 6.0.1 marshmallow
Changelog
08.09.2016.
Reverted pegasusq changes
Synced with cm source
Misc
21.08.2016.
Allow flashlight to take wakelocks again
Synced with cm source
20.08.2016.
Chnaged way rotation sensor looks for time (Should fix it hopefully)
Updated Doze implementation
Synced with cm source
10.08.2016.
Synced with cm sources
Enabled doze
improved pegasusq logic
improved video handling
Misc changes check my github
16.07.2016.
Synced with cm source (android-6.0.1_r52)
Updated sensors timing flag (this might solve issues with them)
Updated samsung power hal
reintrodouced AdvancedDisplay (Device settings)
Added gello browser to build process (bassed on chromium project and caf browser)
disabled low latency audio (Should resolve some stuttering issues over bt)
Changed pc hostname haha (Like anybody cares but well it can be seen in kernel version)
12.04.2016.
Synced with cm source
Misc updates
Hey things are kinda sorting out in my life so this might mean i am back,
Sorry but gf was more important than updating rom and still is so yeah
but as long as she is alright i will update and improve rom
03.03.2016
Synced with cm source
Updated power hal
Allowed torch to use wakelocks so it cane be enabled when screen is off
Misc updates
22.01.2016
Synced with cm source
Fixed few CVE-s
misc device tree updates
15.01.2016.
Synced with cm source
Switched to Snap camera app
Updated media codecs
Misc device tree and kernel updates (check github)
06.01.2016.
Synced with cm source
Misc changes
29.12.2015.
Fixed custom vibration values
Misc updates
24.12.2015.
Enabled idev emulation (fixes aosp keyboard issues some users had)
23.12.2015.
Synced with cm source
Sdcard (external media handling) updates (It shouldnt work this way but since everyone is complaining.. here you go)
21.12.2015.
External media can be mounted now(sdcards woo)
SIM pin lock is now working
09.12.2015.
First public release
XDA:DevDB Information
[ROM][6.0.1] Cyanogenmod 13.0 N7100 Build 15, ROM for the Samsung Galaxy Note II
Contributors
Ivan_Meler
Source Code: https://github.com/ivanmeler
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.0.x
ROM Firmware Required: XXUFND3 or later baseband
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 12.12.M
Beta Release Date: 2016-09-08
Created 2015-12-10
Last Updated 2016-09-09
Reserved
:good: You ivan, live long and prosper.
YAOUUU.. big thank Ivan
Great job! I was waiting for it. I am gonna test it as soon as possible
Awsome Job Ivan...!
Awesome work Ivan...!:good:
Which version SuperSU to use? 2.61? ...
Yingmu said:
Which version SuperSU to use? 2.61? ...
Click to expand...
Click to collapse
None, Rom comes prerooted you just have to enable root in developer options
Ivan_Meler said:
...
Click to expand...
Click to collapse
You are a hero, hats off :highfive:
Goooooood job Ivan _ Meler .I'll wait for the final.
Where is the donation button? You are the man.
Gesendet von meinem GT-N7100 mit Tapatalk
Oh no Sdcard isnt working. Waiting for next build but its the best rom for n7100. Cheer ?
Sent from my GT-N7100
+1 Best dev of this years
Fisrt look great and work not very well on my phone
I have a crash AOSP keyboard stop woking every 3 secondes.
evilpacer said:
+1 Best dev of this years
Fisrt look great and work not very well on my phone
I have a crash AOSP keyboard stop woking every 3 secondes.
Click to expand...
Click to collapse
Blame gapps
I wouldnt recommand wiping cache/dalvink/data right after installing gapps it will remove some essential permissions from them that will cuase some of gapps to crash its bug in most 6.0.x gapps as of now :/
Ivan_Meler said:
Blame gapps
I wouldnt recommand wiping cache/dalvink/data right after installing gapps it will remove some essential permissions from them that will cuase some of gapps to crash its bug in most 6.0.x gapps as of now :/
Click to expand...
Click to collapse
Thanks, you right.
I install CM13.0 only and AOSP keyboard work well.
Pico Gapps is buggy.
PS: The keyboard bug lock my SIM i need to use my code PUK to unlock it .... :'-(
evilpacer said:
Thanks, you right.
I install CM13.0 only and AOSP keyboard work well.
Pico Gapps is buggy.
PS: The keyboard bug lock my SIM i need to use my code PUK to unlock it .... :'-(
Click to expand...
Click to collapse
Doh will look into it we had same bug in 5.0
tried pico micro mini. keyboard just keeps crashing. open gapps are buggy at this time. Rom is awesome though
---------- Post added at 15:37 ---------- Previous post was at 15:28 ----------
i read in tilak's cm13 google forum about this PUK problem in sim, so i already enquired for it from my carrier and it did ask me PUK code instead of sim pin.
I think you do not a wipe cache and dalvik after rom flash.
I will try and test after sd card fix
Seraphitas said:
I think you do not a wipe cache and dalvik after rom flash.
I will try and test after sd card fix
Click to expand...
Click to collapse
Tried that already. Crashes all over the place. Using OpenGapps Micro.
Does anyone have GApps package that actually does work?
Sent from my GT-N7100 using Tapatalk
SteveDC said:
Tried that already. Crashes all over the place. Using OpenGapps Micro.
Does anyone have GApps package that actually does work?
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
Just tried slim mini gapps. didnt help. tried with and without wiping cache/dalvik. no luck.
Without installing gapps, the keyboard is working fine.

[EOL][ROM][6.0.1] Unofficial CyanogenMod 13.0 for N7105

[ROM][6.0.1] Unofficial CyanogenMod 13 N7105
NOTICE: Support for this ROM has ended, as I can no longer work on this. Take a look at the other Marshmallow ROMs out there.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Working
Graphics
RIL
Wifi
Bluetooth
Sensors
Vibration
Camera
Video Playback
NFC
Audio
Doze
GPS
Ambient Display
Not working/Unknown
Camera occasionally stops working. Reboot to fix or download mediaserver killer and run it.
Data occasionally doesn't work after reboot. Turn airplane mode on and off.
Download
Latest build: 11.03.2016
Older builds: Archive
Gapps: Open Gapps
Installation
Read the FAQ to familiarize yourself with any issues that may come up
Make sure you're using the latest TWRP version (3.0.0)
Download the latest build
If using F2FS, read the F2FS section first
Factory reset in TWRP (Very important! Do not skip)
Flash CM13
Flash Gapps
Reboot
Take a look at the post-install steps. They could fix some errors
For updates, it's OK to dirty flash. If you experience any issues however, it is recommended that you clean flash.
Post-install
Make sure YouTube is really working by playing a video
Enable development settings and enable ADB
If you flashed the Stock gapps package, download this and extract it to /system/app
F2FS
F2FS has been enabled. However, you should not use it unless you know what you are doing. I am not responsible for any data loss or damage that occurs. That being said, it should be OK to use.
YOUR EXISTING DATA WILL BE LOST IF FOLLOWING THESE INSTRUCTIONS. BACK IT UP!
Download this for /data and this for /cache
Flash them in TWRP
Reboot to recovery
Follow the rest of the ROM flashing instructions
Changelog
Changelog: -- 11.03.2016
Synced with CM
Back to my custom repos
Experimental incoming calls fix
Doze reenabled
Accelerometer sensor update
New implementation of Ambient Display: You can now wave your hand to A) show notifications or B) turn on the screen to unlock
Latest kernel updates
Changelog: -- 04.03.2016
Synced with CM
Using upstream smdk4412-common and t0lte repo
Latest kernel updates (supposedly fixes the rotation issues)
Changelog: -- 28.02.2016
Synced with CM
SELinux back to permissive (still causing issues in enforcing)
Changelog: -- 16.02.2016
Synced with CM
F2FS support enabled
Changelog: -- 15.02.2016
Moved Snap building to smdk4412-common
Allow flashlight to have wakelock
Downclock more aggressively (better battery life)
Fix Wifi disconnecting when sleeping
Base for F2FS
Changelog: -- 13.02.2016
Experimental Bluetooth patch
Additional SELinux fixes
Changelog: -- 11.02.2016
Synced with CM
SELinux back to permissive (No more bootloops)
Active Display enabled
Additional Doze stuff
Changelog: -- 08.02.2016
Synced with CM
Removed CM12 chroot hack
Switched to CM's method (with a few minor changes)
SELinux is now enforcing
Changelog: -- 05.02.2016
Synced with CM
Latest security release
Applied latest upstream kernel and system/core changes
Changelog: -- 28.01.2016
Synced with CM
Experimental patch for in call volume
Changelog: -- 25.01.2016
Synced with CM
Switch to BFQ
Boot with noop for faster boot
Changelog: -- 24.01.2016
Synced with CM
Switch to Samsung HAL
Add Snap overlay
Changelog: -- 23.01.2016
Synced with CM
Enabled Doze
Changelog: -- 22.01.2016
Synced with CM
Set SELinux to permissive on stock kernel (should fix the bootloop issues)
Update SELinux policies
Apply additional Netflix patch
Allow ADB on stock kernel
Cleaned up radio access families
Changelog: -- 21.01.2016
Synced with CM (fixes the missing QS tiles)
Fix broken camera
Fix YouTube
Changelog: -- 20.01.2016
Synced with CM
Remove camera2
Test fix for Youtube
Fixed kernel
Changelog: -- 19.01.2016
Synced with CM
Added test code to see if it can stop RIL from crashing
Thanks To/Credits
* CyanogenMod team
* p-an (For the original i9305 RIL code)
* ivan_meler (YouTube and Netflix patches)
XDA:DevDB Information
CyanogenMod 13.0 for N7105, ROM for the Samsung Galaxy Note II
Contributors
PoisonNinja
Source Code: https://github.com/PoisonNinja
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod
Version Information
Status: Stable
Stable Release Date: 2016-03-11
Created 2016-01-20
Last Updated 2016-03-23
Reserved
FAQ:
Root
Enable Developer settings and enable root. You can also flash SuperSU (Beta version) in TWRP, but you'll have to flash it every time you upgrade.
Now on Tap
By default, press and hold the Menu button for Now on Tap. To change it, open Buttons in settings and change the action for the button you want to "Search Assistant"
Wifi Issues
Go to developer settings and turn on "Use Legacy DHCP Client". No longer needed
Reserved
Reporting Bugs
When reporting an issue, please provide the following information:
Device (N7105, i317, 889, etc.)
Build Date (Keep in mind the one in About may not be accurate)
Kernel Build Date
Logcat when the issue occur (http://forum.xda-developers.com/showthread.php?t=1726238)
If it's a random reboot, also provide the following information:
Kernel logs. Run "adb shell su -c cat /proc/last_kmsg > /sdcard/Download/kernel.txt" and grab kernel.txt from the Download folder on your phone
Building CyanogenMod
Follow the instructions https://wiki.cyanogenmod.org/w/Build_for_t0lte until the "Get Prebuilt Apps"
Skip that step and do the next one
Edit roomservice.xml in .repo/local_manifests/ and remove the lines with android_device_samsung_smdk4412-common, android_device_samsung_t0lte, and android_kernel_samsung_smdk4412. It should look like this.
Edit blobs.xml in .repo/local_manifests (create it if it doesn't exist). Edit it so it looks like this.
repo sync --force-sync
Delete any folders if you need to in order to resolve sync errors
Turn on caching
source build/envsetup.sh
brunch t0lte
New build is up.
Build2 is booting up just fine. Will be grabbing all my apps and testing this for the day! Thanks @PoisonNinja!
xxjabberwockxx said:
Build2 is booting up just fine. Will be grabbing all my apps and testing this for the day! Thanks @PoisonNinja!
Click to expand...
Click to collapse
No problem. Remember that Camera won't work. I'll fix it later tonight. Videos also won't work, so if a video tries to play, it will freeze. Just exit the app, and you'll be fine.
Roger that PN...So far, strange thing is that it's not restoring my apps. Poop. Gonna have to download everything manually.
xxjabberwockxx said:
Roger that PN...So far, strange thing is that it's not restoring my apps. Poop. Gonna have to download everything manually.
Click to expand...
Click to collapse
What are you using to restore? Are there any errors? I successfully restored using Titanium Backup.
PoisonNinja said:
What are you using to restore? Are there any errors? I successfully restored using Titanium Backup.
Click to expand...
Click to collapse
oh i was talking about the auto restore google play does... maybe its just the transition from L to M.
New Build
New build is up.
Changes:
Fixed missing QS tiles (CM issue)
Fixed broken camera
Fixed video playback (Not Netflix though)
Synced with latest CM sources
If you want video to work, you MUST factory reset and flash again. Sorry about that.
Also, I'm looking for people to test Netflix for me. I suspect I may need more patches, but I don't have a Netflix account to test.
Downloading and testing. 20160121 right?
gathithow said:
Downloading and testing. 20160121 right?
Click to expand...
Click to collapse
Yup. Be warned, I haven't tested this build with Agni. Flashing it may break YouTube, but I doubt it.
PoisonNinja said:
Yup. Be warned, I haven't tested this build with Agni. Flashing it may break YouTube, but I doubt it.
Click to expand...
Click to collapse
Is necessary flash the boot.img?
gathithow said:
Is necessary flash the boot.img?
Click to expand...
Click to collapse
No. Do not flash the boot.img, as it is from a old build. Link is removed from the main post.
Everything works perfectly ... Thank you for the joy you gave me to have the new version of Android.
diogocpr said:
Everything works perfectly ... Thank you for the joy you gave me to have the new version of Android.
Click to expand...
Click to collapse
No problem.
PS: Agni is confirmed working with the latest build. It doesn't break anything.
I'm unable to boot on the latest build on a i317. I just get a bootloop.
jooprzol said:
I'm unable to boot on the latest build on a i317. I just get a bootloop.
Click to expand...
Click to collapse
Have you clean flashed? Try flashing Agni kernel.
PoisonNinja said:
Have you clean flashed? Try flashing Agni kernel.
Click to expand...
Click to collapse
Yeah, clean flashed. Tried with and without gapps, bootloop both times.
Boots up fine with the Agni kernel.
jooprzol said:
Yeah, clean flashed. Tried with and without gapps, bootloop both times.
Boots up fine with the Agni kernel.
Click to expand...
Click to collapse
Interesting. That should have been fixed with the latest build. Let me know if there's anything else wrong.

[P600][n1awifi][ROM][7.1] Official LineageOS 14.1 - weekly

LineageOS is a free, community built, aftermarket firmware distribution of Android 7 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Screenshots and Videos
Screenshots
Click to expand...
Click to collapse
What works?
Working​Boot
Display/Brightness
Touchscreen
Audio
Wifi
S-Pen
Buttons/Lights
SDCard
USB Storage
GPS
Bluetooth
IR Blaster
Camera
DRM (L3)
SELinux Enforcing
Not working​MHL
Miracast
Not in the list? Report below
Click to expand...
Click to collapse
Other issues
(empty)
Click to expand...
Click to collapse
How to install
This ROM REQUIRES Lollipop bootloader. See this post to learn how to update your bootloader.
1. Download ROM and Gapps and transfer to device
2. Boot into recovery (TWRP recommended)
3. Factory reset
4. Install ROM
5. Install Gapps
6. Reboot to system
You can skip factory resetting ("dirty flash") if you're upgrading from Official LineageOS to a newer Official build.
Click to expand...
Click to collapse
Downloads
Official LineageOS ROM: https://download.lineageos.org/n1awifi
Gapps: http://opengapps.org/ [Recommended: ARM 7.1 Pico or Nano]
Root: https://download.lineageos.org/extras
Exynos5420 team ROMs (UNOFFICIAL builds):
ROM: http://download.exynos5420.com/LineageOS-14.1/n1awifi/
Old downloads:
https://forum.xda-developers.com/devdb/project/?id=16957#downloads
Click to expand...
Click to collapse
Note: n1awifi is the same device as lt03wifi - the SM-P600
Thanks to
Without these people this ROM wouldn't exist:
Exynos5420 dev team ( @deadman96385 @thompatry @ZakooZ @Orion116 @joshndroid @Andmoreagain @thermskin, @javelinanddart, @tincho5588 )
@ShevT - For his work on the P601 (huge contributor to our current device tree)
@Raymanfx - First to bring CM to this device
Click to expand...
Click to collapse
Changelog
Current changelogs: https://download.lineageos.org/n1awifi/changes/
Old changelogs:
Code:
20170302
Fix bug where SetupWizard didn't have buttons
Lockscreen rotation setting added to Display->Rotation settings
20170222
Go official!
Fix video rescaling issue
SEPolicy fixups
Add noise suppression blobs
Enforce SELinux
20170130
Automatic screen brightness no longer enabled by default - zakooz
Enable our cache partition - zakooz
fstab: Mark cache, userdata as formattable - deadman96385
sepolicy: Update policies for media - cryptomilk + deadman96385
Doze fixups and tweaks - BadDaemon + deadman96385 + tincho5588 + zwliew
power: Use our kernel nodes - zakooz
Use NV21 color format instead of nv12tiled - tincho5588
ramdisk: fix s5p-smem ownership - tincho5588
Config: fix audio_effects.conf - tincho5588 + deadman96385
AudioFX: build the package again - tincho5588
20170113
Security patch: 05 January 2017
Enable "Samsung Doze"
GPU: Allow user under/overclock
GPU: Allow user thermal throttling points
GPU: Allow user voltages
20170107
Updated to LineageOS
Fixed microphone (Credit to @thompatry)
Fixed DRM
20161226
Update to final CyanogenMod sources (RIP CM)
Update to Android 7.1.1
December 2016 Security patch
Enable lockscreen rotation
Fix issue where the system was using the wrong audio_effects.conf
Enable advanced low power audio
Include Deathly Aduitor in installation
Increase maximum allowed charging current
No longer using haxes to avoid qualcomm telephony code
Update to 3.4.113 (from 3.4.112)
Update IR driver to samsung LL
Deathly Aduitor no longer complains about outdated kernel
Update Sound effect libs from T705XXU1ANF8 (Samsung MM)
Update mobicore from T705XXU1ANF8 (Samsung MM)
20161201
Major restructure and reorganization (now using exynos5420-common)
Updated audio configuration to official lollipop
Fixed offline charging
Updated audio blobs to official lollipop (kitkat bootloader has no problem with this)
Enabled US 5GHz wifi bands
Updated everything except for GPU driver to samsung's official Marshmallow sources (From klimtlte)
Allow apps to see and control:
USB charging currents
S-Pen Power Saving Mode (turn off S-Pen detection if it is inserted)
All the CPU thermal throttling points
S-Pen booster (increase CPU frequency when the S-Pen touches the screen)
Touchscreen booster (increase CPU frequency when a finger touches the screen)
Capacitive button booster (increase CPU frequency when a finger touches the buttons)
20161113
Fixed bug where buttons would light up even if lights were disabled in settings
Fixed bug where software buttons were enabled by default and restored option to disable them in Settings->Buttons
Camera fully working without crashes
Android security patch: 5 November 2016
20161107
Updated to CM14.1 (Android 7.1)
Fixed camera (but it's quite unstable)
20161030
Fixed battery stand-by problem introduced in previous build
Fixed HD video playback
Audio should crackle less
Now including Cyanogenmod Setup Wizard
Fixed possible system hang and reboot on first-boot
Enabled freeform windows
Improved system UI smoothness
Improved button lights HAL
Enabled strong stack protection
20161008
IR Blaster fixed? I can't test this because my IR emitter is faulty
Disabled doze - our device doesn't properly support this and it will actually decrease battery life
Updated default CPU governor and I/O scheduler configuration - battery life should be vastly improved if you weren't use custom CPU governor settings
Updated and enabled sdcardfs - Testing, storage should work better though
Many clean-ups in the device configuration
Removed system dependency on qualcomm ext-telephony (currently a mess on wifi-only-non-qualcomm devices)
Builds are about 50mb smaller (first boot is longer though) (give me feedback on what you prefer!)
Security patch - October 5, 2016
20160925
Fixed Bluetooth
Fixed Flashlight (and camera preview)
Fixed Settings app crash
Small fixes to RIL (lack of) and WiFi
20160916
Fixed GPS
20160915
Fixed audio
Fixed video rendering
Security patch - September 6, 2016
20160908
Initial release
Click to expand...
Click to collapse
Source code
Device: https://github.com/LineageOS/android_device_samsung_n1awifi
Kernel: https://github.com/LineageOS/android_kernel_samsung_exynos5420
Exynos5420 team: https://github.com/exynos5420
Click to expand...
Click to collapse
XDA:DevDB Information
SM-P600 LineageOS14.1 Official, ROM for the Samsung Galaxy Note 10.1 (2014 Edition)
Contributors
ZakooZ, https://github.com/exynos5420
Source Code: https://github.com/LineageOS/
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: LL bootloader
Based On: LineageOS
Version Information
Status: Stable
Created 2016-09-08
Last Updated 2017-06-22
FAQ
Before using the ROM:
Q. Can I have an ETA for the next build?
A. This ROM is scheduled to build every Thursday at 8 AM GMT. The download becomes available 1 to 5 hours later. If the build fails then you have to wait until the week after.
Q. Does this ROM support custom kernels?
A. No. You can still use them but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter using them.
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP, custom ROM's modify the framework a lot, so Xposed can cause a ton of issues on custom ROM's. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports while using it as Xposed can cause a lot of bugs.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. Xposed is not yet available for nougat, however when it is ready you will need to use the version arm sdk 25.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the install instructions in the first post..
Q. What TWRP versions are supported?
A. ShevT's. Check out this thread for the TWRP download.
Q. Can the builds be dirty flashed over each other?
A. Yes if you're on Official builds.
Q. How do I dirty flash builds on top of old (working) ones?
A. Flash the ROM zip only (no gapps, don't wipe data).
Q. Will this work on Kitkat bootloader?
A. Read the install instructions.
Using the ROM:
Q. How do I enable software buttons?
A. Settings->Buttons.
Q. How do I change my Menu button to a Recents/AppSwitcher button?
A. Settings->Buttons.
Q. Do I need to provide a log if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a log.
Q. How do I get a logcat, and what type should I get, and more questions that can conveniently be answered by my pre-determined answer?
A. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog
Deathly Adiutor App
Deathly Adiutor is an open-source, modified version of Kernel Adiutor made specifically for Exynos 5420 devices.
Features
Power Saving:
S-Pen Power Saving - Same as in Touchwiz, disables S-Pen detection if it's inserted in the slot
S-Pen Input Booster - Instantly increase CPU frequency when the S-Pen touches the screen
Touchscreen Input Booster - Instantly increase CPU frequency when you touch the screen
Touchkey Input Booster - Instantly increase CPU frequency when you touch the capacitive buttons
Touchscreen Glove Mode (Not all screens support this)
CPU Control:
CPU Settings reworked - Deathly adiutor back-end was cleaned up to work specifically with our CPU
CPU Thermal - Control all thermal throttling points for the CPU (make your device run colder... or even hotter)
GPU Control:
GPU Time in States - Same as CPU Time in States (Times in each frequency)
GPU Frequency Control
GPU Voltage Control
GPU Governor Control
Battery control:
Full power statistics - See current and maximum charging currents and current source of power
Unstable power source detection - Lowers current until the power source is stable
Customize charger current limits - Make your device charge faster (safe, if the charger can not supply enough current, the board will dynamically decrease the current)
Screen-On current limiter - Limit charging if screen is on (to avoid overheating)
Speakers:
Privacy mode - Disable main speaker if headphones are plugged in
Earpiece volume
Left/Right speaker volume
Speaker equalizer
Headphones:
Left/Right channel volume
Mono output mode
Headphone equalizer
App Themes:
Light theme - White and Red
Dark theme - Grey and Red
Credits
This post was written by @ZakooZ
This app is brought you by the exynos5420 developer team: @deadman96385 @thompatry @ZakooZ @Orion116 @mosimchah @joshndroid @Andmoreagain @thermskin, @javelinanddart, @tincho5588, @ShevT
Translators:
@ShevT - Russian
The following people deserve distinction for their major contribution:
@tincho5588, responsible for 80%+ of the code for the new features
@deadman96385, the main maintainer of the Deathly kernel and most of the remaining code
Downloads
The app can be found in the Play Store:
Free version (with ads): https://play.google.com/store/apps/details?id=com.exynos5420.deathlyadiutor.ads
Donator version (no ads): https://play.google.com/store/apps/details?id=com.exynos5420.deathlyadiutor.adfree
Helping the developers
You may have noticed there's 2 versions of this app, one ad-free for donators and one with ads.
You can help us by clicking ads you're interested in for the free version, or purchasing the donator version!
We will use the money generated by this app as common money for the developers of the team. It will be used to pay for our web-hosting (we own a gerrit server and a domain name, exynos5420.com). It will also be used to buy a new device if one of ours breaks.
Translating the App
You can also help us by translating the app to your language:
1. You can start by looking at the full english language file: Link
2. Then compare it to your unfinished language file. You can find it here, under values-xx/strings.xml, xx being your language abbreviation.
3. You can then fill-in the missing strings in your language file. Here's an example of what a proper update looks like.
4. Then you can submit your translation by using our gerrit. If you don't know how to use gerrit, just PM the translation to your favorite developer and he'll get it merged!
Thanks for working on CM 14. You will make it compatible with LP Bootloader or you are still on KK Bootloader? Because with the LP and M AOSP roms we had to stay on KK Bootloader to avoid sound, spen and reboot issues.
Stogie87 said:
Thanks for working on CM 14. You will make it compatible with LP Bootloader or you are still on KK Bootloader? Because with the LP and M AOSP roms we had to stay on KK Bootloader to avoid sound, spen and reboot issues.
Click to expand...
Click to collapse
It currently works on top of the CM13 device specific code so it's probably best to use KK bootloader. Making it compatible with LP bootloader is difficult and not a top priority at the moment
The Rom is working in lp Bootloader, unfortunately not so well. Where can I get the kitkat Bootloader?
The Google App is not working for me
wulkanat said:
The Google App is not working for me
Click to expand...
Click to collapse
I don't have issues with google apps. Try flashing KK bootloader like this: http://forum.xda-developers.com/gal...cial-build-t2980604/post65631142#post65631142
Regardless, a more stable build is coming in the next few days, with better compatibility for exynos
ZakooZ said:
I don't have issues with google apps. Try flashing KK bootloader like this: http://forum.xda-developers.com/gal...cial-build-t2980604/post65631142#post65631142
Regardless, a more stable build is coming in the next few days, with better compatibility for exynos
Click to expand...
Click to collapse
Wow, the Rom is now very smooth, only with the standard gapps there are many fc and you cant sign in a google account.
Great work so far, excited for the stable build! No crash on gapps for me , everything felt pretty quick for an early build.
How about for note n8010
Plz
shukenmg said:
How about for note n8010
Plz
Click to expand...
Click to collapse
The new Note 10.1 is completly different from the Old one, so you are in the wrong thread. Don't expect too much, the n8000 is a very Old device.
New build
cm-14.0-20160915-UNOFFICIAL-n1awifi.zip
Fixed:
Audio
Video rendering (in Youtube and such)
Settings app now has cyanogenmod stuff (don't expect the settings to work) (root works)
New build
cm-14.0-20160916-UNOFFICIAL-n1awifi.zip
Fixed:
GPS (with help from @deadman96385)
Links are dead?
Edit, nevermind. Being dumb.
Few things I've run across.
1) Cannot add a second Google account.
2) Status bar battery settings don't take. Tried adding percentage next to portrait icon but won't display.
And FYI, root is baked in. Trying to use SuperSU ended in a boot loop.
angus242 said:
Few things I've run across.
1) Cannot add a second Google account.
2) Status bar battery settings don't take. Tried adding percentage next to portrait icon but won't display.
And FYI, root is baked in. Trying to use SuperSU ended in a boot loop.
Click to expand...
Click to collapse
1) 2) will be fixed by Cyanogenmod in the coming weeks, all I can do about that is wait until they update their code to support Nougat
Yes root is already baked into the developer options
ZakooZ said:
1) 2) will be fixed by Cyanogenmod in the coming weeks, all I can do about that is wait until they update their code to support Nougat
Yes root is already baked into the developer options
Click to expand...
Click to collapse
No problems. I appreciate all the work. I'm just reporting what I've found. Ya never know what might fall through the cracks. :good:
Awesome, dev, thank you!!!! Only for P600? Don't works on P601, right?
kryzeK said:
Awesome, dev, thank you!!!! Only for P600? Don't works on P601, right?
Click to expand...
Click to collapse
Should work on P601, but try at your own risk (RIL won't work for sure)

[6.0.x|SM-T520| Unofficial Lineage/CyanogenMod 13.0 (n2awifi)

Lineage/CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.​
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Lineage/CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). Lineage/CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Important information:
This thread is for Unofficial Lineage/CyanogenMod 13.0 builds for picassowifi/n2awifi (SM-T520). The following will not be supported here:
Custom kernels
Mods
Xposed
I don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
Installation
First time flashing Lineage/CyanogenMod 13.0 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible Recovery
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash Lineage/CyanogenMod
Install the Google Apps addon package (Optional)
Reboot
Other issues?
Before posting in this thread, make sure of a few things:
You used the search function of the forums.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread.
Logs! You can use this: https://play.google.com/store/apps/d....tortel.syslog
Downloads
Lineage:
2017/01/14 build
CyanogenMod:
2016/12/30 build
2016/11/5 build
2016/10/9 build
2016/9/22 build
Changelog:
2017/01/14
migrate from CM to Lineage (better chance to upgrade to CM14.1 soon)
Info: OK-Google/MIC should work. (please feedback!)
2016/12/30
Change to exynos common tree sources (chance to upgrade to CM14.1)
Support of "Deathly Adiutor"
Info: OK-Google/MIC broken!
2016/11/05
Nightly without specific changelog. Just latest sources used.
2016/10/09
IR Blaster fixed
Mic fixed
2016/9/22
Initial Release
Google Apps:
http://opengapps.org/- thanks to the OpenGapps team!
The Lineage/CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Source:
Kernel: https://github.com/exynos5420/android_kernel_samsung_exynos5420
Device Tree: https://github.com/exynos5420/android_device_samsung_n2awifi
Credits:
@UpInTheAir for his kernel magic and misc fixes
@crpalmer (for picassowifi device and kernel gits)
@eousphoros (for his work on klimtwifi)
@nvertigo67 (for his work on chagallwifi)
@Nexorrr (for his work on chagalllte)
@LaCruz (For testing my builds on device)
Exynos5420 Dev Team (@deadman96385 @thompatry @ZakooZ @Orion116 @mosimchah @joshndroid @Andmoreagain @thermskin, @javelinanddart )
@awidawad for his first picassowifi builds
XDA:DevDB Information
[6.0.x|SM-T520| Unofficial Lineage/CyanogenMod 13.0 (n2awifi), ROM for the Samsung Galaxy Tab Pro 12.2, 10.1, 8.4
Contributors
deadman96385, LaCruz
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2016-09-22
Last Updated 2017-01-14
Bugs:
None at this time
Hybrid Build:
I have completely replaced all of the proprietary blobs that were from n2awifi (SM-T520) and replaced them with those from n1awifi (SM-P600). It is pretty much your sister tablet the only differences is it has a different screen that supports the s-pen. Internally they are exactly the same. Crucially it also got official Lollipop which your tablet did not. This build is also now using the M kernel base designed for the Galaxy Tab S this allows it to get the latest kernel updates and drivers.
Kernel Info:
M Kernel base from the Galaxy Tab S
M GPU driver from Galaxy Tab S
CPU Voltage Control
CPU OverClock/UnderClock (Up to 2.1GHZ)
MIF/INT Voltage Control
Wolfson Sound Control (No Yamaha support)
UKSM instead of KSM
Added the following IO Schedulers: fifo, fiops, sioplus, tripndroid, vr, zen, bfq (Default)
Full f2fs support updated off the mainline (Stock cm kernel has limited support)
Modified Thermal Throttling temperatures for all devices so hopefully they won't get as hot
Exynos thermal exposed to sysfs
Android Logger disabled by default can be enabled over sysfs
WQ power efficient workqueues (Still need to apply in more places)
Frandom Support
Readahead bumped to 256 from 128
Currently Disabled:
GPU Voltage Control/GPU OverClock/UnderClock (Needs to be rewriten for the M driver)
Mine just in case
Thanks! Will try soon!
Working really great thanks! A good surprise as it seems everything is working. Even the glitches in recent menu are fixed. Kernel is doing good job.
You've done a huge step for this tablet development ...totally unexpected
I Will use it as daily driver and will signal any issue if encountered
Sent from my SM-T520 using XDA-Developers mobile app
Working great.
Camera and gps active!
Thanks a lot for this rom.
OMG thank you! will try it later
sys log - playstore
working in this case or needed Logcat from adb & fastboot ? (ty & sorry for english)
works great, thanks
daitalos said:
working in this case or needed Logcat from adb & fastboot ? (ty & sorry for english)
Click to expand...
Click to collapse
It doesn't need anything! Flash ROM and gapps in twrp nothing else
Sent from my SM-T520 using XDA-Developers mobile app
man for Logcat I asked
Cosmox_ said:
It doesn't need anything! Flash ROM and gapps in twrp nothing else
Sent from my SM-T520 using XDA-Developers mobile app
Click to expand...
Click to collapse
No for how flashed this ROM...
Very nice work!
daitalos said:
working in this case or needed Logcat from adb & fastboot ? (ty & sorry for english)
Click to expand...
Click to collapse
Camera, gps ,wifi ,sd,bluetooth,adb,all working correct,only sometimes some app closed.... ( I have big problem to upload files,maybe my router, I hope be arrived correctly the Logcat) Ty & sorry for english :good:
Great ROM - camera GPS all working.
Had problem with MIC - not sure if working. OK Google does not response (worked on other version of CM13). Tried voice recorder and file was blank
same problem here
DAVECGC said:
Great ROM - camera GPS all working.
Had problem with MIC - not sure if working. OK Google does not response (worked on other version of CM13). Tried voice recorder and file was blank
Click to expand...
Click to collapse
with Ok google...opens,but is not responding...
A thing of beauty - everything I've tested working, no more random brightness fluctuations.
So, how soon do we get CM14?
(I kid, I kid!! No ETAs, I know)
Sent from my SM-T520 using XDA Premium HD app
I jumped ships from CM 12.1. First experiences are very positive, everything works as expected or better. I will report any stray bugs if found.
Thank you very much!
Will this work on picassowifi (SM-T520) or only n2awifi (SM-T520)? I never heard of n2awifi and the link I got to this page was from picassowifi cm13. Thanks!
WVUTampaAlum said:
Will this work on picassowifi (SM-T520) or only n2awifi (SM-T520)? I never heard of n2awifi and the link I got to this page was from picassowifi cm13. Thanks!
Click to expand...
Click to collapse
n2awifi is the proper name for picassowifi, picasso is from the qcom lte device.
Genesius01 said:
A thing of beauty - everything I've tested working, no more random brightness fluctuations.
So, how soon do we get CM14?
(I kid, I kid!! No ETAs, I know)
Sent from my SM-T520 using XDA Premium HD app
Click to expand...
Click to collapse
Well cm-14.0 is mostly working on n1awifi, once its most things are working i will release a build of it
daitalos said:
with Ok google...opens,but is not responding...
Click to expand...
Click to collapse
DAVECGC said:
Great ROM - camera GPS all working.
Had problem with MIC - not sure if working. OK Google does not response (worked on other version of CM13). Tried voice recorder and file was blank
Click to expand...
Click to collapse
Can you post a log of when you are trying to use ok google?
daitalos said:
Camera, gps ,wifi ,all working correct,only sometimes some app closed.... ( I have big problem to upload files,maybe my router, I hope be arrived correctly the Logcat) Ty & sorry for english :good:
Click to expand...
Click to collapse
What apps are forcing closing also are they force closing while you are doing certain things?
some times ..
I am on playstore and i want to Install a app...Touch screen does not respond & says "app does not respond" & closing...After reboot working correct again...This happens only in playstore ( i hope understand me my english is not good) I sent you before Logcat, i think has records this ( if you want I can sent you & another Logcat if it happens again) Ty ( I use nano gapps perhaps i will try & with mini) and google now from any screen display options but not working (see screenshot) [ I got another dmseg & Logcat from fastboot perhaps to help you ] :good:
This. rom. is. awesome!
Thank you! Everything is working so smoothly and without problems so far. best rom ever!

Categories

Resources