Ok so i have the tmobile sim in my verizon phone I am using the fast.T-Mobile.com apn settings I'm in a 4g area. My issue is my phone rapidly changes from h+ to 3g, to 4g lte and very seldom edge..... Fyi happens as I'm at work so I'm stationary. Data works but kinda lags at times. Any thoughts as to why or what to do??? And I have tried ipv4/6 and just each respectively. Thanks in advance.
If you are set on global try switching to lte gsm utms only and see if that helps
deron37129 said:
If you are set on global try switching to lte gsm utms only and see if that helps
Click to expand...
Click to collapse
I'll give it a go in the morning. Thanks will let u know if it works.
The stock lollipop Rom has an issue with syncing hangouts and gmail. In order to force sync,IPv6 is manually disabled every 1 minute. When that happens, your data connection resets, and you see your phone go up through the speed technologies.
jfsat said:
The stock lollipop Rom has an issue with syncing hangouts and gmail. In order to force sync,IPv6 is manually disabled every 1 minute. When that happens, your data connection resets, and you see your phone go up through the speed technologies.
Click to expand...
Click to collapse
Well that sucks lol. What would you recommend? I'd just like to stop cycling through the data 4g, 3g ect.
SBAKER24 said:
Well that sucks lol. What would you recommend? I'd just like to stop cycling through the data 4g, 3g ect.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=59514506&postcount=2921
This is probably what you seek, but a word of warning; I haven't tried any of this myself. I don't know whether this will work or break your phone. If I were trying to do this, I would probably just comment out that second line (put a '#' in front), but if you start getting sync problems, this will probably be why.
jfsat said:
The stock lollipop Rom has an issue with syncing hangouts and gmail. In order to force sync,IPv6 is manually disabled every 1 minute. When that happens, your data connection resets, and you see your phone go up through the speed technologies.
Click to expand...
Click to collapse
The thread you posted seems to,only refer to Wi-Fi issues and syncing.... I am not connected to Wi-Fi. I read that when they disconnect Wi-Fi there phones are fine with data..... Not sure I wanna delete anything like that off my phone when I'm not,sure off this will help. Of I went back to stock kk would I still have this issue?
SBAKER24 said:
The thread you posted seems to,only refer to Wi-Fi issues and syncing.... I am not connected to Wi-Fi. I read that when they disconnect Wi-Fi there phones are fine with data..... Not sure I wanna delete anything like that off my phone when I'm not,sure off this will help. Of I went back to stock kk would I still have this issue?
Click to expand...
Click to collapse
Theoretically you won't still have this problem if you go back to KK. I haven't gone back to KK since I took the plunge into LP, so don't quote me on that. In fact, if you just install the stock LP ROM, you won't have this problem any more as well.
OR, you could install Jasmine 5.0, and then upgrade it to something like 5.0.7 or 5.0.8, which ever one was before the IPv6 fix started getting baked into the Rom. That's probably what I would do, but I haven't tried SkyDragon yet, so I don't know what I'm missing.
jfsat said:
Theoretically you won't still have this problem if you go back to KK. I haven't gone back to KK since I took the plunge into LP, so don't quote me on that. In fact, if you just install the stock LP ROM, you won't have this problem any more as well.
OR, you could install Jasmine 5.0, and then upgrade it to something like 5.0.7 or 5.0.8, which ever one was before the IPv6 fix started getting baked into the Rom. That's probably what I would do, but I haven't tried SkyDragon yet, so I don't know what I'm missing.
Click to expand...
Click to collapse
Think I'll give jasmine 5.0 a spin. I noticed there is a 5.0.11 changelog says disable the 10 and 1 minute ipv6 not sure if I should try it out or not :/ http://forum.xda-developers.com/showpost.php?p=59517503&postcount=2929
SBAKER24 said:
Think I'll give jasmine 5.0 a spin. I noticed there is a 5.0.11 changelog says disable the 10 and 1 minute ipv6 not sure if I should try it out or not :/ http://forum.xda-developers.com/showpost.php?p=59517503&postcount=2929
Click to expand...
Click to collapse
If you don't like the Edge > 3G > H+ > LTE, don't use 5.0.11, I'm on that, and it happens to me. I'm also Unlocked and on the T-Mobile network, just like you. It didn't happen to me at all before the IPv6 stuff started going into the Rom. And I also didn't have any sync issues.
jfsat said:
If you don't like the Edge > 3G > H+ > LTE, don't use 5.0.11, I'm on that, and it happens to me. I'm also Unlocked and on the T-Mobile network, just like you. It didn't happen to me at all before the IPv6 stuff started going into the Rom. And I also didn't have any sync issues.
Click to expand...
Click to collapse
Trying to get Jasmine 5.0 installed how didbu go about it? Looks like I can't the normal twrp flash way. I'm looking into it now.
SBAKER24 said:
Trying to get Jasmine 5.0 installed how didbu go about it? Looks like I can't the normal twrp flash way. I'm looking into it now.
Click to expand...
Click to collapse
You'll have to follow the steps from the 5.0 post. Extract the files to /sdcard/ and then do some shell commands in TWRP. Takes you out of your comfort zone a little, but it worked for me.
jfsat said:
You'll have to follow the steps from the 5.0 post. Extract the files to /sdcard/ and then do some shell commands in TWRP. Takes you out of your comfort zone a little, but it worked for me.
Click to expand...
Click to collapse
I just got it installed. It was a bit different but its up and running. Now i need to find the versions you said lol.
SBAKER24 said:
I just got it installed. It was a bit different but its up and running. Now i need to find the versions you said lol.
Click to expand...
Click to collapse
This one might be the one you're looking for. And you can install is in TWRP like any normal file
http://forum.xda-developers.com/showpost.php?p=59469705&postcount=2746
jfsat said:
This one might be the one you're looking for. And you can install is in TWRP like any normal file
http://forum.xda-developers.com/showpost.php?p=59469705&postcount=2746
Click to expand...
Click to collapse
Perfect!!! Thanks. I got it loaded up now i am getting all my data back up on the phone.
Related
I have been having an issue with WiFi where it won't disconnect when leaving a hotspot. The device shows that it is still connected even though I'm miles from the router and won't pick up 3G. I performed a hard reset and on a fresh load everything appeared to be fine. When I walked out of WiFi range 3G picked up immediately. This morning, the issue is back.
Based upon doing a factory reset and it working, I believe it must be an app issue. Does anyone know of any apps that would cause a wifi lock or otherwise prevent the hand-off? I have over 150 apps installed and would prefer not to go one by one if someone can point me to any known issues.
browning said:
I have been having an issue with WiFi where it won't disconnect when leaving a hotspot. The device shows that it is still connected even though I'm miles from the router and won't pick up 3G. I performed a hard reset and on a fresh load everything appeared to be fine. When I walked out of WiFi range 3G picked up immediately. This morning, the issue is back.
Based upon doing a factory reset and it working, I believe it must be an app issue. Does anyone know of any apps that would cause a wifi lock or otherwise prevent the hand-off? I have over 150 apps installed and would prefer not to go one by one if someone can point me to any known issues.
Click to expand...
Click to collapse
have you installed the OTA update? (assuming you're still stock) it fixed this issue for most
dangle79 said:
have you installed the OTA update? (assuming you're still stock) it fixed this issue for most
Click to expand...
Click to collapse
Yes, OTA update is installed. I am still rooted and s-off with TWRP as well.
browning said:
Yes, OTA update is installed. I am still rooted and s-off with TWRP as well.
Click to expand...
Click to collapse
how did you get to that point? did you install the pre-rooted updated ROM? if so did you also apply the radio update? (i really don't know if it needed done separately from the ROM, but i know there was a radio update included with the OTA)
dangle79 said:
how did you get to that point? did you install the pre-rooted updated ROM? if so did you also apply the radio update? (i really don't know if it needed done separately from the ROM, but i know there was a radio update included with the OTA)
Click to expand...
Click to collapse
I followed the guide at the following link and it worked perfectly for me. http://forum.xda-developers.com/showthread.php?t=1770501
Thinking through this further I did restore the wifi ssids from a titanium backup. TB restores data only - could there be an issue with that? I'm just really puzzled here.
I just did more testing. If I turn "Best Wi-Fi Performance" off I can get the device to switch to 3g when I'm out of range. I'd like to retain this setting but it obviously doesn't handoff correctly. Is there a timeout setting somewhere?
Sent from my EVO using xda app-developers app
Yes. Its in your wifi/advance settings.
#Root-Hack_Mod*Always\=LTE
laie1472 said:
Yes. Its in your wifi/advance settings.
#Root-Hack_Mod*Always\=LTE
Click to expand...
Click to collapse
I'm not following. There is nothing in the wlan ini file with setting listed like that. I'm assuming I'm missing something and need a little more direction. Thanks
Sent from my EVO using xda app-developers app
I bought my Evo4G LTE about two weeks ago and immediately rooted it. I have S-off with lazy panda and am running CM10 JB rom. Throughout the first week everything was running just fine. I could send and receive picture messages and MMS using both 3G and wifi. However over the past few days this has all changed. Whenever a picture comes in, either on 3G or wifi, the word "downloading" appears greyed out but the message never comes in. I have turned off and back on then back off automatic downloads. I have rebooted the phone, reloaded an earlier nandroid and nothing works. This happened all the time on my OG Evo 4G and I just wrote it off to "being the way it is". But honestly that isn't good enough with a brand new phone. I tried researching this and came up with someone saying to connect to Sprint Zone, which I cannot do because it is a stock app only and let the program troubleshoot for me. I downloaded an apk of this but it will not work.
If anyone has any help with this it would be much appreciated.
Have you tried updating ur profile and prl? I do that anytime and everytime I flash a new rom.....just a thought
vel7wil said:
Have you tried updating ur profile and prl? I do that anytime and everytime I flash a new rom.....just a thought
Click to expand...
Click to collapse
Profile and prl?
rersland613 said:
Profile and prl?
Click to expand...
Click to collapse
settings/system updates update both
bigdaddy619 said:
settings/system updates update both
Click to expand...
Click to collapse
I don't have a system updates tab on my settings drop down? Maybe I'm in the wrong spot?
rersland613 said:
I don't have a system updates tab on my settings drop down? Maybe I'm in the wrong spot?
Click to expand...
Click to collapse
you are looking in quick settings there is a settings icon in the upper right of the screen in the pull down on the notifications side
bigdaddy619 said:
you are looking in quick settings there is a settings icon in the upper right of the screen in the pull down on the notifications side
Click to expand...
Click to collapse
I did that. It is divided into 6 main sections: wireless and networks, interface, device, personal, accounts, and system. But I can't find anything about system updates. Again I am running CM10 Jelly Bean.
rersland613 said:
I did that. It is divided into 6 main sections: wireless and networks, interface, device, personal, accounts, and system. But I can't find anything about system updates. Again I am running CM10 Jelly Bean.
Click to expand...
Click to collapse
it's been a while since i've been on CM try looking in system
You need a sense Rom to update profile and prl
PHP:
om4 said:
You need a sense Rom to update profile and prl
Click to expand...
Click to collapse
Which sense rom do you suggest? So I need to keep one for backup on my phone and switch back over to CM10 after I update? I've only been getting one bar of cell service lately. Is this all pointing to the same issue? Would the prl still be the problem even when on wifi?
Any sense Rom, since its just for updates grab on of the basic stock roms from android development section. All the custom roms are a lot larger due to the various mods and extra stuff
om4 said:
Any sense Rom, since its just for updates grab on of the basic stock roms from android development section. All the custom roms are a lot larger due to the various mods and extra stuff
Click to expand...
Click to collapse
Went ahead and downloaded the stock rom with goodies. Went through settings and updated the prl and profile. Can anyone tell me what the correct prl should be or does it depend on your location? Btw thank you for helping me with this.
Mine is at 25006
I'm on the same prl then. I still don't know what's up. I always have 1 bar of signal and am very frequently on 1x instead of 3g. At the same time my wife will be on 3g with full bars on her iPhone. The part that gets me about not sending and receiving pictures is that I was on WiFi. Should it matter what profile and prl I'm on if I'm trying to receive data via WiFi?
Sent from my EVO using xda app-developers app
Well most ASOP roms have the issue of intermittent mms not downloading but with that said some sense roms don't allow mms over WIFI and some do. If you aren't connected to WIFI and you still can't download mms after profile and prl updates you can get your msl number and do a data reset and go through the process of reregistering your phone with sprints network and that should solve your issue.
Sent from my EVO using Tapatalk 2
Hoping to find some help here. I have searched the web and no definitive answer. I was running CM 10.1.3 on my Razr Maxx for a long while. Just flashed to CM 10.2 with Android 4.3. Since flashing, I no longer get a 4g icon for my signal, I get LTE. In addiiton, the LTE signal fades in and out and most times the bars are white which I have found out means I'm not synced with Google servers. I have played with the APN options to no avail. Is anyone familiar with this problem? Is there a fix? Thanks for any help you can provide.
cigator said:
Hoping to find some help here. I have searched the web and no definitive answer. I was running CM 10.1.3 on my Razr Maxx for a long while. Just flashed to CM 10.2 with Android 4.3. Since flashing, I no longer get a 4g icon for my signal, I get LTE. In addiiton, the LTE signal fades in and out and most times the bars are white which I have found out means I'm not synced with Google servers. I have played with the APN options to no avail. Is anyone familiar with this problem? Is there a fix? Thanks for any help you can provide.
Click to expand...
Click to collapse
The LTE icon replaced the 4G icon in development, that's normal. Are you sure you're losing sync status? Where did you read that is the reason? Do your emails, etc push through notification? If so, there's really no problem other than an icon that isn't 100% representative of its status.
Also, did you do a complete wipe before upgrading to 10.2? Major updates usually recommend full wipes before upgrading for many reasons.
I did a fresh root and install of safestrap 3.65 and CM10.2 stable on my xt912 for verizon. I also have the same issue. Coming from the stock rom I now get terrible service and if I change the network to anything with LTE (global or cdma/evdo +LTE) I cannot send or receive picture messages. I tried to change the APN and it makes no difference. Lastly if I try to edit the APN it will disappear from the list.
I stopped editting the apn because when I limit the service to cdma/evdo I can send and recieve picture messages, but I get no LTE/4g service.
I am starting to wonder if the rom slot 1 conflicts somehow with the original stock rom.
After installing safestrap I did a factory wipe (not advanced) and installed the rom and gapps.
If there is something I am missing please do inform me. Perhaps the op's issue is the same.
owenfred said:
I did a fresh root and install of safestrap 3.65 and CM10.2 stable on my xt912 for verizon. I also have the same issue. Coming from the stock rom I now get terrible service and if I change the network to anything with LTE (global or cdma/evdo +LTE) I cannot send or receive picture messages. I tried to change the APN and it makes no difference. Lastly if I try to edit the APN it will disappear from the list.
I stopped editting the apn because when I limit the service to cdma/evdo I can send and recieve picture messages, but I get no LTE/4g service.
I am starting to wonder if the rom slot 1 conflicts somehow with the original stock rom.
After installing safestrap I did a factory wipe (not advanced) and installed the rom and gapps.
If there is something I am missing please do inform me. Perhaps the op's issue is the same.
Click to expand...
Click to collapse
You need to update to kitkat stock messaging app & delete old, how to here:
http://forum.cyanogenmod.com/topic/80704-mms-not-sending-issues-editing-apn-settings/
crackerjack1957 said:
You need to update to kitkat stock messaging app & ...
Yes I did that. That is why I can send them when on cdma/evdo. It has never worked with global or any lte network.
Thinking of trying cm11m4 on rom slot 2 to see if that is better...
Click to expand...
Click to collapse
owenfred said:
crackerjack1957 said:
You need to update to kitkat stock messaging app & ...
Yes I did that. That is why I can send them when on cdma/evdo. It has never worked with global or any lte network.
Thinking of trying cm11m4 on rom slot 2 to see if that is better...
Click to expand...
Click to collapse
It worked for me & all the others that read & followed guidelines.
Click to expand...
Click to collapse
crackerjack1957 said:
owenfred said:
It worked for me & all the others that read & followed guidelines.
Click to expand...
Click to collapse
Read #15 & others
http://forum.cyanogenmod.com/topic/80704-mms-not-sending-issues-editing-apn-settings/
Setup (2) droid razrs with 8sms & Network mode on CDMA+LTE+EVDO
Global works also
Click to expand...
Click to collapse
crackerjack1957 said:
owenfred said:
It worked for me & all the others that read & followed guidelines.
Click to expand...
Click to collapse
It is fine to get mms to send on CDMA. If the phone is on a 4G or LTE antenna it doesn't work for me. Also, this does not solve the issue of the APN's disappearing. This is a fix for some cases not a solution.
In my case I created Rom slot #2 and installed CM11 M4 snapshot and all is working there. LTE works fine, MMS sends... I didn't find any immediate other issues in the 2 hrs I played with it last night. Looks like this may be the daily driver for a while until CM11 stable comes out.
I still have 10.2 available in Rom slot #1 so I can test if anyone cares to find the real "solution"
Owen
Click to expand...
Click to collapse
owenfred said:
crackerjack1957 said:
It is fine to get mms to send on CDMA. If the phone is on a 4G or LTE antenna it doesn't work for me. Also, this does not solve the issue of the APN's disappearing. This is a fix for some cases not a solution.
In my case I created Rom slot #2 and installed CM11 M4 snapshot and all is working there. LTE works fine, MMS sends... I didn't find any immediate other issues in the 2 hrs I played with it last night. Looks like this may be the daily driver for a while until CM11 stable comes out.
I still have 10.2 available in Rom slot #1 so I can test if anyone cares to find the real "solution"
Owen
Click to expand...
Click to collapse
I would not have thought this would be an issue on a stable build either.
With kitkat in development, CM10.2 will be abandoned.
Probably will try CM11 nightly myself in about a month unless there is another snapshot or even stable build by then.
Click to expand...
Click to collapse
Sorry guys, thought we had one of these already.
Just curious about the V_2.3.1? Mostly the reception, but....
Is the Reception any better - mainly for those that have lousy reception to start with.
Are you having any issues?
I haven't heard anything yet so let me know :good:
I have decent reception at my house but I think the beta added a bar to it (from 3 to 4). Definitely better at my son's school. I was only getting 3g there but now get LTE. The big test will be at work but I'm on vacation and don't go back until next week.
I was so amazed that I actually noticed a better internet connection I never looked at my signal bars there is an extra bar or two in my house, which I swear I only had one if that all the time one thing is that I'm not sure if it is the ROM or me but shutdownani is really choppy, every since 2.2 but I try modules sometimes that make my phone unstable like xprivacy& cool tool which I immediately remove but deff noticed improved signals, like I actually see the difference
Updated to 2.3.1 to check apn, I checked apn setting. They didn't change, so I selected reset to default. Then I lost internet and apn kept selecting VM. On reboot phone app fc. Had to revert apn.config and do ##scrtn
jcfunk said:
Updated to 2.3.1 to check apn, I checked apn setting. They didn't change, so I selected reset to default. Then I lost internet and apn kept selecting VM. On reboot phone app fc. Had to revert apn.config and do ##scrtn
Click to expand...
Click to collapse
Did you use the ,DUN METHOD via master shortcut lite, hidden menu #2 4th on list, internet•, launch
Here is a screen shot. If I hit reset it will fill in the new apn added by 2.3.1 then my internet stops, and on restart phone app fc,
jcfunk said:
Here is a screen shot. If I hit reset it will fill in the new apn added by 2.3.1 then my internet stops, and on restart phone app fc,
Click to expand...
Click to collapse
You don't create a new one. You edit the top two. Just tap them and
add ,dun to the APN.
engine95 said:
You don't create a new one. You edit the top two. Just tap them and
add ,dun to the APN.
Click to expand...
Click to collapse
Yes, I already did that edit. 4 me in a specific area the 4G is slower than the 3G. I wanted to try different apns. But those APN would not connect for Sprint at all
What is the intended effect of that file? Sprint has its own APN on a profile update
Works Well for me, definitely see improvement with Switching from 3g to LTE. I also find an LTE signal much quicker. I work in NYC, before the 2.3.1 update I would struggle to get an LTE signal once I left Penn station, now As soon as I walk out it grabs a signal. engine95 you are the Man Bro.
@engine95
I think the apn.config has bad settings for Sprint OTA, I've edited going to test, should be able to activate phone with the edits.
jcfunk said:
Yes, I already did that edit. 4 me in a specific area the 4G is slower than the 3G. I wanted to try different apns. But those APN would not connect for Sprint at all
Click to expand...
Click to collapse
I'm not sure what you were trying to do prior to the above.
If you're talking the apn in the beta, It seems to work better for all of us.
If you're talking about modifying that apn for hotspot, it works also.
jcfunk said:
What is the intended effect of that file? Sprint has its own APN on a profile update
Click to expand...
Click to collapse
See above
jcfunk said:
@engine95
I think the apn.config has bad settings for Sprint OTA, I've edited going to test, should be able to activate phone with the edits.
Click to expand...
Click to collapse
The original, and the beta do the update profile/prl as they should. And "Activate device" is the telltale.
But, you can't use the beta on a fresh install. Meaning on a full ROM. It'll only work as an update.
Remind me again what issue you're trying to fix and I'll see if I can help.
Edit: In V3, it has a new zipalign binary that does what you want.
Did some testing, updating profile/prl works because it uses apn settings from activation, but if you do ##72786# which erases everything then reboots and does an activation using apn.conf.xml to connect to ota. But the setting don't work for ota. Crashes phone app and then only way to fix by wiping and doing clean install.
jcfunk said:
Did some testing, updating profile/prl works because it uses apn settings from activation, but if you do ##72786# which erases everything then reboots and does an activation using apn.conf.xml to connect to ota. But the setting don't work for ota. Crashes phone app and then only way to fix by wiping and doing clean install.
Click to expand...
Click to collapse
That would be right because it has to go through the setup all over again. Just like a clean, full rom install. And it can't find the apn it needs.
Yes, all that file is, is a hack. Not a fix.
Well I'm going to keep working on trying to make the hack safe,
The new native hosts file appears to be blocking random pictures in the play store. Not sure which URL is the culprit but I disabled the file temporarily and the pictures come back. Other than that v3 is running great. Thank you.
I didn't experience any data or APN issues, rom running good, battery real good, only thing I noticed, LEDs aren't working for any app, for me.
Visionikz03 said:
The new native hosts file appears to be blocking random pictures in the play store. Not sure which URL is the culprit but I disabled the file temporarily and the pictures come back. Other than that v3 is running great. Thank you.
Click to expand...
Click to collapse
I've seen that, too. It used to happen with the Mother of all Ad Blockers until that dev removed some entries. Some of the devs apparently host their images on sites that also serve ads.
Here's MoaAB if you're interested: http://forum.xda-developers.com/showthread.php?t=1916098
Visionikz03 said:
The new native hosts file appears to be blocking random pictures in the play store. Not sure which URL is the culprit but I disabled the file temporarily and the pictures come back. Other than that v3 is running great. Thank you.
Click to expand...
Click to collapse
Thanks.
That can happen. If they are too restrictive, then you might have to use the stock Sprint one.
joeyhdownsouth said:
I didn't experience any data or APN issues, rom running good, battery real good, only thing I noticed, LEDs aren't working for any app, for me.
Click to expand...
Click to collapse
Mine are but the timing is about 10 sec between blinks.
I guess check your settings, and maybe wipe cache and dalvic?
I just realized I don't have the native Wi-Fi calling app. Can I ##72786# from v 3.01 and get it to download or is that only on factory ROM?
I just made a call and my LTE didn't drop and I was able to surf the internet while on the call so I think the official OTA is about to drop and they've activated the advanced calling features.
on prerooted .509 btw
I just gave mine a try on .485 and it dropped my LTE as soon as the call began. Can anyone else confirm that it is working on the alternate lollipop?
You can see the ongoing call in the status bar as well as the active LTE
BladeRunner said:
You can see the ongoing call in the status bar as well as the active LTE
Click to expand...
Click to collapse
Interesting. I have rooted .485, and want to keep root to get the same firmware as you. Is it a simple upgrade to the new software through TWRP recovery to jump from .485 to yours?
mpeclipse03 said:
Interesting. I have rooted .485, and want to keep root to get the same firmware as you. Is it a simple upgrade to the new software through TWRP recovery to jump from .485 to yours?
Click to expand...
Click to collapse
yes, you should be able to dirty flash it
BladeRunner said:
yes, you should be able to dirty flash it
Click to expand...
Click to collapse
By dirty flash you mean simply download the software zip onto the SD card similar to the first update?
mpeclipse03 said:
By dirty flash you mean simply download the software zip onto the SD card similar to the first update?
Click to expand...
Click to collapse
yes, just download the pre-rooted flashable and flash with recovery.
BladeRunner said:
yes, just download the pre-rooted flashable and flash with recovery.
Click to expand...
Click to collapse
Is there a link to the .509 download? I know it used to be on the Dev section, but I think the thread disappeared.
mpeclipse03 said:
Is there a link to the .509 download? I know it used to be on the Dev section, but I think the thread disappeared.
Click to expand...
Click to collapse
http://forum.xda-developers.com/z3/...ment/5-0-2-sony-xperia-z3v-prerooted-t3214182
I am on .509 and Advanced Calling is not activated. Been trying all morning to get it to work with no success.
dachao said:
I am on .509 and Advanced Calling is not activated. Been trying all morning to get it to work with no success.
Click to expand...
Click to collapse
was it active on your line before with another device? Mine was, and I suppose it could be location specific. Who knows for sure, but it is definitely working for me. Simultaneous voice/data and HD calling.
BladeRunner said:
was it active on your line before with another device? Mine was, and I suppose it could be location specific. Who knows for sure, but it is definitely working for me. Simultaneous voice/data and HD calling.
Click to expand...
Click to collapse
No, it wasn't active on my line before but we have over 40 phones on the business account and there is no way to activate it on our side of the account management.
Coworkers with the GS5/6 iPhones have advanced calling.
I can't seem to get it working either. Hmmm, I wonder if it is a regional thing or why one person can the feature over the others.
mpeclipse03 said:
I can't seem to get it working either. Hmmm, I wonder if it is a regional thing or why one person can the feature over the others.
Click to expand...
Click to collapse
I think unless you had it active already on a different device it won't work. I suspect they have activated it for testing prior to the lollipop update.
Again it's possible they've only activated it for testing it in limited areas.
BladeRunner said:
I think unless you had it active already on a different device it won't work. I suspect they have activated it for testing prior to the lollipop update.
Again it's possible they've only activated it for testing it in limited areas.
Click to expand...
Click to collapse
I have a note5 with it active on my current line and it the interesting thing, is that it shows up when you go into my MyVerizon account as an active feature. Could it be a SIM card issue that only certain ones are supported?
mpeclipse03 said:
I have a note5 with it active on my current line and it the interesting thing, is that it shows up when you go into my MyVerizon account as an active feature. Could it be a SIM card issue that only certain ones are supported?
Click to expand...
Click to collapse
I know it was showing as active for me on the .485 firmware last week, but wasn't working, so I don't think it is a SIM issue.
BladeRunner said:
I know it was showing as active for me on the .485 firmware last week, but wasn't working, so I don't think it is a SIM issue.
Click to expand...
Click to collapse
did this just start working for you or did you get it to activate. On my girlfriends druid turbo after you activate advanced calling it has a menu below where you can check video and voice do you have these options.
Tigerhoods said:
did this just start working for you or did you get it to activate. On my girlfriends druid turbo after you activate advanced calling it has a menu below where you can check video and voice do you have these options.
Click to expand...
Click to collapse
I flashed the. 509 firmware last night and tried the advanced calling this morning and it was just working. I have the advanced calling, HD and video toggles.
BladeRunner said:
I flashed the. 509 firmware last night and tried the advanced calling this morning and it was just working. I have the advanced calling, HD and video toggles.
Click to expand...
Click to collapse
Still nothing on .485. I have the option for advanced calling and when I hit it, it says to restart my phone in 5 minutes, but when I restart, there is no options available and it says I have to activate it again.