Related
I noticed a lot of people want a fast charger for the Note. This charger is for the Touchpad. I have this and it works really well. It charges faster than the OEM charger that came with the Note.
Not to mention, it is on sale right now for less than $5. Go grab one. From past experience, I used this at 15% battery life and charged for an hour and I was back over to 80%.:victory:
http://www.shopping.hp.com/en_US/ho.../FB341AA?HP-TouchPad-Power-Charger&aoid=35252
Is the usb cable that comes with it the same as the note takes?they don't show a pic of the other end and is it a charge only cable?If yes and yes I'm a gonna get one.Thanks
technut said:
Is the usb cable that comes with it the same as the note takes?they don't show a pic of the other end and is it a charge only cable?If yes and yes I'm a gonna get one.Thanks
Click to expand...
Click to collapse
Yes, it is a micro USB cable. One end is USB and other is micro USB. The cable length is longer than most phone cables. I haven't measured it, but from my plug to my desk, I still have excess cable compared to the original one from the phone.
Thank you, getting one!
This have been discussed hundreds time before....
That 1amp is the output of the charger which forwards the current to kernel of the device... NOTE can only intake 1 amp current... ( remove your battery and read the dam sticker :thumbup
Even though you will supply 2 3 4 5 amp... The maximum in would be 1 amp ONLY...
SECONDLY, micro usb cables have a restriction of carrying current... They cannot pass more than 1 amp current successfully... Therefore galaxy tab series does not come with micro usb slots....
Lastly my recommendation would be NOT to waste money on any other chargers...
Noted by the BEAST!!
dx.varun said:
This have been discussed hundreds time before....
That 1amp is the output of the charger which forwards the current to kernel of the device... NOTE can only intake 1 amp current... ( remove your battery and read the dam sticker :thumbup
Even though you will supply 2 3 4 5 amp... The maximum in would be 1 amp ONLY...
SECONDLY, micro usb cables have a restriction of carrying current... They cannot pass more than 1 amp current successfully... Therefore galaxy tab series does not come with micro usb slots....
Lastly my recommendation would be NOT to waste money on any other chargers...
Noted by the BEAST!!
Click to expand...
Click to collapse
It has been discussed, but it DOES charge faster than a conventional 1amp charger. If you don't have the charger and have nothing to compare with, then I don't think you can say it does not work.
Go check FCC about the charge. Also, the cables provided DOES carry a 2amp charge. Our note can handle fast charging but throttles down to a slower charging rate after 80%.
having a micro usb slot or not have a micro usb slot has nothing to do with the current it can handle.
Ipads and Iphones have the same connector but yet one has a 1amp charger and the other a 2amp charger.
deliriousbb said:
It has been discussed, but it DOES charge faster than a conventional 1amp charger. If you don't have the charger and have nothing to compare with, then I don't think you can say it does not work.
Go check FCC about the charge. Also, the cables provided DOES carry a 2amp charge. Our note can handle fast charging but throttles down to a slower charging rate after 80%.
having a micro usb slot or not have a micro usb slot has nothing to do with the current it can handle.
Ipads and Iphones have the same connector but yet one has a 1amp charger and the other a 2amp charger.
Click to expand...
Click to collapse
Firstly, I have tried to use with a 2amp charger that came with my SGT P1000.. NO DIFFERENCE...
SECONDLY, PULL OUT BATTERY AND READ!
Google for micro usb cable max output... You will get your answers...
Noted by the BEAST!!
dx.varun said:
This have been discussed hundreds time before....
That 1amp is the output of the charger which forwards the current to kernel of the device... NOTE can only intake 1 amp current... ( remove your battery and read the dam sticker :thumbup
Even though you will supply 2 3 4 5 amp... The maximum in would be 1 amp ONLY...
SECONDLY, micro usb cables have a restriction of carrying current... They cannot pass more than 1 amp current successfully... Therefore galaxy tab series does not come with micro usb slots....
Lastly my recommendation would be NOT to waste money on any other chargers...
Noted by the BEAST!!
Click to expand...
Click to collapse
deliriousbb said:
It has been discussed, but it DOES charge faster than a conventional 1amp charger. If you don't have the charger and have nothing to compare with, then I don't think you can say it does not work.
Go check FCC about the charge. Also, the cables provided DOES carry a 2amp charge. Our note can handle fast charging but throttles down to a slower charging rate after 80%.
having a micro usb slot or not have a micro usb slot has nothing to do with the current it can handle.
Ipads and Iphones have the same connector but yet one has a 1amp charger and the other a 2amp charger.
Click to expand...
Click to collapse
Well its $5, which is not worth this discussion, I'll gladly give this money even for the stock samsung charger.
i_max2k2 said:
Well its $5, which is not worth this discussion, I'll gladly give this money even for the stock samsung charger.
Click to expand...
Click to collapse
Agreed! A good charger for cheap.
dx.varun said:
Firstly, I have tried to use with a 2amp charger that came with my SGT P1000.. NO DIFFERENCE...
SECONDLY, PULL OUT BATTERY AND READ!
Google for micro usb cable max output... You will get your answers...
Noted by the BEAST!!
Click to expand...
Click to collapse
You don't have to get your panties in a twist. Rather than just read forums and assume the worst of everything try it for yourself. I've tried both and it is faster. Just trying to help my fellow Note users to get the best out of their phones.
btw, what are you screaming about pull out the battery and read? you tell me what you want us to know. RATED: 3.7V; 1500mA... WOW ok that proves your point...sigh:silly:
dx.varun said:
This have been discussed hundreds time before....
That 1amp is the output of the charger which forwards the current to kernel of the device... NOTE can only intake 1 amp current... ( remove your battery and read the dam sticker :thumbup
Even though you will supply 2 3 4 5 amp... The maximum in would be 1 amp ONLY...
SECONDLY, micro usb cables have a restriction of carrying current... They cannot pass more than 1 amp current successfully... Therefore galaxy tab series does not come with micro usb slots....
Lastly my recommendation would be NOT to waste money on any other chargers...
Noted by the BEAST!!
Click to expand...
Click to collapse
As an HP TouchPad owner, I can confirm that the cable provided with the charger are 'special'. My TP will not charge with any other MicroUSB cable connected to the official charger, the same cables which won't charge the TP will charge the Note. (I also own the HP touchstone dock, which the TP spends most of it's life sitting on.)
deliriousbb said:
It has been discussed, but it DOES charge faster than a conventional 1amp charger.
Click to expand...
Click to collapse
I have four different wall chargers, including two of this HP barrel adapter (one that came with the TouchPad, one that came with the Touchstone). With the supplied cable, it does charge the TouchPad very quickly. From webOS, the net charge rate is about 1.6 A with the screen on, so probably close to 2 A coming out the USB port.
However, when you plug a Note into this charger, the Note will still only draw 1 A. I have other AC chargers that are also able to supply 1 A to the Note, so in that respect this HP charger isn't anything special. However, it is only $5, which is a good deal.
---------- Post added at 11:39 PM ---------- Previous post was at 11:14 PM ----------
pTeronaut said:
My TP will not charge with any other MicroUSB cable connected to the official charger, the same cables which won't charge the TP will charge the Note.
Click to expand...
Click to collapse
I've found that the microUSB cable that comes with the Note, when paired with the HP TouchPad's AC charger, will supply 2 A. At least, that's what the OS reports: /sys/devices/platform/usb_gadget/current-mA shows "2000". Plugging the TouchPad into the Note's AC charger shows a value of "900". Plugging it into my laptop's USB port drops that value down to "500", as expected.
I bought two a week ago off Amazon for $10 each. $5 each with free shipping is a steal. I picked up three more. Thanks for posting this deal. I get 1A charging with either the stock charger or TP charger. I like to have a few extra chargers to sprinkle around at home or work (for my Note and the other devices I own that charge off USB.... including a TP).
deliriousbb said:
Yes, it is a micro USB cable. One end is USB and other is micro USB. The cable length is longer than most phone cables. I haven't measured it, but from my plug to my desk, I still have excess cable compared to the original one from the phone.
Click to expand...
Click to collapse
When you charge your phone using this HP microUSB cable, do you have issue with NO DEEP SLEEP when unplugging the Note from the charger?
There has been issues reported in XDA where, depending on the USB cables used to charge the Note (connected to computer OR power charger), if you unplug the Note, it will not go DEEP SLEEP, causing significant power drain.
This does NOT happen when the Note is charged using the cable that came with the Note.
Download Current Widget from the play store. Add widget to home screen and you will realize that your phone is not charging any more than 1 amp as designed.
Try the usb out from your pc and you will see about half an amp.
Sent from my SAMSUNG-SGH-I717 using xda premium
I have the galaxy tab brick charger the HP touch pad charger and my note charging brick....the touchpad charger works faster...but I feel like it doesn't get fully charged..seems to die faster?. I used the galaxy tab brick...slow to charge warms my phone up nicely...I'd stick with the original note charger.
Sent from my SAMSUNG-SGH-I717 using xda premium
lanwarrior said:
When you charge your phone using this HP microUSB cable, do you have issue with NO DEEP SLEEP when unplugging the Note from the charger?
There has been issues reported in XDA where, depending on the USB cables used to charge the Note (connected to computer OR power charger), if you unplug the Note, it will not go DEEP SLEEP, causing significant power drain.
This does NOT happen when the Note is charged using the cable that came with the Note.
Click to expand...
Click to collapse
I charge my Note overnight using my Touchpad's MicroUSB cable plugged into the Samsung charger, and I don't experience any difference in power drain.
Where is that post from the guy who put all these petty arguments to rest with scientific tests of all the various options and results??
Good lord people it's a charger for a phone .. no need to get so heated!
(unlike my stock charger.. which gets very heated!)
great price!!!
ordered 3 of them
the price is way cheaper than just a single micro usb cable shipped from other stores
i have 3 already
1 at work, 2 for home.
definitely faster than OEM. I charge overnight, no issues. had for around 5-6 months now. and i can use the phone while charging.
fact is that it DOES charge faster.
i recommend it
WOW***
Great price I bought 2!
I just wanted to let people know that Scosche just released a new dual 2.4A car charger. This is not a car charger that splits 2.4A between two ports, but one that has full 2.4A per port. You can charge tablets and phones at the same time. What I love about this charger, is that it sits flush in the car. No stick protruding out.
I used to have their older model, the 2.1A dual car charger USBC202M. I purchased it in May. When I saw that they had this one available on their site, I asked a representative through chat if I could exchange my USBC202M for the USBC242M one. He said sure and gave me the info on how to do the exchange. I only paid the shipping to them and got a brand new item. I did not send the original box or anything. Great customer service!
I will try this later on. I have a dedicated USB charge only cable so I will not run into any of the charging issues that some people might have using a data/charge cable.
The USBC202M and USBC242M are listed as the same price on SCOSCHE's website. The USBC242M is not up on Amazon yet, which is where I purchased the original charger.
Link to USBC242M: http://www.scosche.com/chargers/ipad-usb-car-charger-two-port
Link to the charge only cable I am using (nice 5ft): http://www.amazon.com/Specialised-M...=UTF8&qid=1385138950&sr=8-1&keywords=portapow . I like how it is a little thinner than the Mediabridge 6ft one that everyone seems to be using. And the connections are a little less bulkier as well so I am able to connect with my phone that is using a Spigen Slim Armor.
Pics up soon.
How do you use that micro usb charging only cable with the Note 3?
CreekDirt said:
How do you use that micro usb charging only cable with the Note 3?
Click to expand...
Click to collapse
It's like any other USB cable, you just plug it in to a USB port. It allows AC charging regardless if you plug it into an AC adapter or a USB port on your PC. This will not allow any data when used in a PC.
CreekDirt said:
How do you use that micro usb charging only cable with the Note 3?
Click to expand...
Click to collapse
http://www.mobilefun.co.uk/blog/2013/11/samsung-galaxy-note-3-usb-3-0-and-microusb-compatibility/
Just look at your Note 3's USB 3.0 port on the phone. See that one slot is bigger. Thats where you plug the USB 2.0 cable into. It will work just fine.
USBC202M
That same model number is on Amazon. it lists it differently though..
Dual 10 WATT (2.1A) USB Ports
http://www.amazon.com/Scosche-USBC202M-Charger-works-iPhone/dp/B0077PM3KG
It is only $16 which is a lot less than $24
UPDATE
I see the difference. The packaging you have a picture of has that Model number listed as USBC242M not USBC202M
The lesser should be more than adequate for the Note 3 as it exceeds the 1.8A it will really use at the most.
krelvinaz said:
USBC202M
That same model number is on Amazon. it lists it differently though..
Dual 10 WATT (2.1A) USB Ports
http://www.amazon.com/Scosche-USBC202M-Charger-works-iPhone/dp/B0077PM3KG
It is only $16 which is a lot less than $24
UPDATE
I see the difference. The packaging you have a picture of has that Model number listed as USBC242M not USBC202M
The lesser should be more than adequate for the Note 3 as it exceeds the 1.8A it will really use at the most.
Click to expand...
Click to collapse
Yeah. I had the original USBC202M that you see on Amazon. I paid that back in May. I contacted Scosche through chat on their website (took about 30 min before someone was even available) and asked if I could just swap it with the newer model since they were selling it for the same price. He just needed the receipt (which showed my cost of $16) when I send my original one. It was done as a warranty exchange since it was within a year.
I know 2.4A is more than enough but this is great if you also wanted to charge a tablet as well. Or if people were running kernels that allowed more than 1.8A charging.
Here's a much cheaper Anker dual 2.4A that I was looking at but hate how large it is. The price is soooo nice too. $11.99
http://www.amazon.com/Release-Anker...5144055&sr=8-1&keywords=2.4a+car+charger+dual
jteran5 said:
Here's a much cheaper Anker dual 2.4A that I was looking at but hate how large it is. The price is soooo nice too. $11.99
http://www.amazon.com/Release-Anker...5144055&sr=8-1&keywords=2.4a+car+charger+dual
Click to expand...
Click to collapse
The Anker is good and the price is right.
cpufrost said:
The Anker is good and the price is right.
Click to expand...
Click to collapse
Anker makes quality products. The price is great but I was really looking for a flush look when installed in my car. Most of my interior is black and this is a bright pearl white. Is there an advantage of a stick design as opposed to a flush?
jteran5 said:
Anker makes quality products. The price is great but I was really looking for a flush look when installed in my car. Most of my interior is black and this is a bright pearl white. Is there an advantage of a stick design as opposed to a flush?
Click to expand...
Click to collapse
Yes, looks aside the compact version is going to run much hotter if both outlets are used at capacity.
jteran5 said:
Anker makes quality products. The price is great but I was really looking for a flush look when installed in my car. Most of my interior is black and this is a bright pearl white. Is there an advantage of a stick design as opposed to a flush?
Click to expand...
Click to collapse
Spray paint.
KroniK187 said:
http://www.mobilefun.co.uk/blog/2013/11/samsung-galaxy-note-3-usb-3-0-and-microusb-compatibility/
Just look at your Note 3's USB 3.0 port on the phone. See that one slot is bigger. Thats where you plug the USB 2.0 cable into. It will work just fine.
Click to expand...
Click to collapse
Yeah I had totally missed that until I saw this thread. After posting the question I looked at the port and saw that it is a two in one port. Just the other day I was bummed that I forgot the N3 charging cable at home. I spent all day reserving battery when I had my S4 cable in my bag the whole time. Doh!
I am getting one of these. So basically this is overkill right? Since 1.8a is max? Does the charge only cable benefit more in any way than a charge/data cable or are the charging amps the same?
Update.
I ended up getting the less amp USBC202M via Amazon http://www.amazon.com/gp/product/B0077PM3KG and ordered two Charging MicroUSB cables also from Amazon http://www.amazon.com/gp/product/B009W34X1I
The cables are designed for full charge (just like being plugged into an AC charger) but in the car. I can charge my Note 3 and Tablet both with 1800mA each. The cables are straight 6FT heavy cables which are hard to break, and give you lots of room to use the phone or tablet while it is plugged in.
Just like having AC power in the car/truck with fast charge times
The difference between wall charging and usb charging, is that the wall charger ties the two usb data pins together. Phones detect that and charge slower on usb to protect computer ports from high current drain. Good car chargers solder together the two data pins to cheat the phone into thinking that is connected into a wall charger and thus charge the fastest possible.
You could find usb cables that internally connect the data pins, however that cable won't allow you to send data.
This applies to most usb charged devices, like android, iphone, ipad, etc.
---------- Post added at 10:37 AM ---------- Previous post was at 10:15 AM ----------
The Scosche does not work with the galaxy s5; the anker does but is larger physically.
I found my dual micro high current car charger on boxwave. It was cheap, and works great. No problems at all. The phone shouldnt pull more power then it needs. If so id check with tech services.
Thinkfreshdell said:
I found my dual micro high current car charger on boxwave. It was cheap, and works great. No problems at all. The phone shouldnt pull more power then it needs. If so id check with tech services.
Click to expand...
Click to collapse
Don't worry. If the charger is required more power than is able to provIde it will just cut to the top.
Output of that plug states 10v 12w
Official note 3 charger is 5.3v 2amp I cant see how this could be good for your phone/battery.
idone said:
Output of that plug states 10v 12w
Official note 3 charger is 5.3v 2amp I cant see how this could be good for your phone/battery.
Click to expand...
Click to collapse
Where does it say 10v?
Anyway, I've finally bought the Anker 24W, which is compatible with the Galaxy S5, so there are much higher probability to be compatible with newer devices like Galaxy Tab S, Galaxy note 4, etc.
scandiun said:
Where does it say 10v?
Anyway, I've finally bought the Anker 24W, which is compatible with the Galaxy S5, so there are much higher probability to be compatible with newer devices like Galaxy Tab S, Galaxy note 4, etc.
Click to expand...
Click to collapse
Second picture in the first post, twards the bottom left.
idone said:
Second picture in the first post, twards the bottom left.
Click to expand...
Click to collapse
Obviously this is a mistake, it's referring to input voltage.
12V USB Adapter
Input Voltage: 10-16V
USB Output Voltage: 5VDC, Dual 12 Watt (2.4A)
http://www.scosche.com/chargers/ipad-usb-car-charger-two-port
Note that some car chargers allow 12-24V because you can use also trucks and vans for charging. Doesn't seem the case for Scosche.
Is there a cable longer then the original that will charge like the original?
The cable is too short, and i cant find a longer one anywhere. I need one that would charge the phone fast like the original.
I use a 3 foot usb cable extension with mine
Sent from my SM-N900P using XDA Premium 4 mobile app
motixlost said:
Is there a cable longer then the original that will charge like the original?
The cable is too short, and i cant find a longer one anywhere. I need one that would charge the phone fast like the original.
Click to expand...
Click to collapse
There is nothing special about the original cable, it is just a data cable/charge cable. It is the charger that is special. The stock charger is internally shorted to charge [email protected]?2 amps not [email protected] Get a good quality 6 foot data/charge cable from monoprice. The monoprice cables have small ends that fit on almost all cases with smaller USB holes. EBay cables are hit or miss.
Sent from my ME302C using Tapatalk 4
tdamocles said:
There is nothing special about the original cable, it is just a data cable/charge cable. It is the charger that is special. The stock charger is internally shorted to charge [email protected]?2 amps not [email protected] Get a good quality 6 foot data/charge cable from monoprice. The monoprice cables have small ends that fit on almost all cases with smaller USB holes. EBay cables are hit or miss.
Sent from my ME302C using Tapatalk 4
Click to expand...
Click to collapse
Grab your stock charger, install Galaxy Charging Current on your phone and test different cables. You'll see that the stock cable charges much faster. This goes for car chargers too. I have a Samsumg OEM 2 A car charger that I tested with different cables. The difference between the stock cable and even good quality cables is notorious. What really isn't that special is the charger. Even a USB charging port from a laptop can provide more than 500 mA. By the way, you are confusing DC and AC currents.if you are referring to the 500 mA of the USB standard, they are DC too.
That being said, I too wish there was a 3 meter cable that could charge as fast as the Samsung original.
Alexei Volkoff said:
Grab your stock charger, install Galaxy Charging Current on your phone and test different cables. You'll see that the stock cable charges much faster. This goes for car chargers too. I have a Samsumg OEM 2 A car charger that I tested with different cables. The difference between the stock cable and even good quality cables is notorious. What really isn't that special is the charger. Even a USB charging port from a laptop can provide more than 500 mA. By the way, you are confusing DC and AC currents.if you are referring to the 500 mA of the USB standard, they are DC too.
That being said, I too wish there was a 3 meter cable that could charge as fast as the Samsung original.
Click to expand...
Click to collapse
I bought my phone brand new from a local Verizon Corporate store and obviously my phone came with the Galaxy Note 3's standard white Samsung 2.1amp charger and white USB 3.0 charging cable. I needed extras and wanted to order something as close to stock performance and charging speeds that I could get without paying out the a$$ for a couple of real OEM wall chargers and cables from Verizon, so I did a little research and found a couple of good combos off Amazon that matched the same charging rates that the OEM charger/cable combo gives me.
I ordered an Amazon Basics 2.1amp output wall charger, this Amazon Basics 9ft long USB 3.0 cable, this small/low profile PNY 12volt/2.1amp "Rapid Charge" Car Charger, and this 8ft long Mediabridge USB 3.0 "SuperSpeed" Cable.
I tested combos of each cable(OEM White Samsung Galaxy Note 3 Cable, Amazon Basics Cable, and the Mediabridge Cable) with EACH charger(OEM White Samsung Galaxy Note 3 Wall Charger, Amazon Basics 2.1amp Wall Charger, and the PNY 2.1amp Car Charger) using the "Galaxy Charging Current" app and got the same results all across the board with each combo, even the Samsung Charger/Samsung Cable combo. So unless that app spits out skewed numbers on a consistent basis, I believe it's safe to say that as long as you get a decent quality charger that can truly pump out 2.1amps like the OEM Samsung Charger and a decent cable to pair up with whatever charger you purchase, there's no need to spend the big bucks and go OEM....unless you're just one of those kinds of people that HAS to have OEM everything just for the extra peace of mind and to make sure all of their accessories are of the same matching Samsung brand. I see no reason to spend that kind of money when a MUCH cheaper alternative will get the job done just the same, PLUS the "craftsmanship" and quality of the aftermarket chargers/cables I mentioned appears to be outstanding, if not maybe even a little better than the OEM Samsung combo...besides the fact that the fancy OEM cable has the glossy, white, square-shaped plugs at the each end of the cable with the "SAMSUNG" name emblazoned on them and those aftermarket cables gave me a hard time squeezing past the charger cutout on my Spigen Slim Armor Case(some shaving of the plug is necessary in order for them to fit through my Slim Armor charging cutout).
If you're not concerned with all that fanciness, save yourself quite a few bucks and opt for the cheaper alternatives...just do yourself a favor and do your research first...you WON'T be disappointed. :good::good::good:
You got lucky. I've tested about half dozen cables by now and none of them managed to deliver the same current as the stock cable. Out of curiosity, what current did you get? 1800 mA?
Yeah, it's mostly testing with the Galaxy Charging app on whether or not you get the max current or not. I got lucky that my wife's Lumia's data cable is at par with the stock cable and use that for Ingress sessions. I also use the HP Touchpad wall charger as a secondary charger, it gives out 2.1 amps, one of the best chargers around.
harveydent said:
Yeah, it's mostly testing with the Galaxy Charging app on whether or not you get the max current or not. I got lucky that my wife's Lumia's data cable is at par with the stock cable and use that for Ingress sessions. I also use the HP Touchpad wall charger as a secondary charger, it gives out 2.1 amps, one of the best chargers around.
Click to expand...
Click to collapse
I have also tested with various combinations of the OEM sammy cable and charger, AmazonBasics 3' and 9' USB3 cables, a nexus 7 wall charger and an Anker 2.4W car charger. All did very well and charged around 1800mA. My laptop charges it at a little under 500mA.
I also had to shave the AmazonBasics end to fit with my Slim Armor case. I don't get why they made it so large in the first place, its HUGE. Also, the AmazonBasics cord is very thick and stiff, more like cable TV cable.
jsdecker10 said:
I bought my phone brand new from a local Verizon Corporate store and obviously my phone came with the Galaxy Note 3's standard white Samsung 2.1amp charger and white USB 3.0 charging cable. I needed extras and wanted to order something as close to stock performance and charging speeds that I could get without paying out the a$$ for a couple of real OEM wall chargers and cables from Verizon, so I did a little research and found a couple of good coimbos off Amazon that matched the same charging rates that the OEM charger/cable combo gives me.
I ordered an Amazon Basics 2.1amp output wall charger, this Amazon Basics 9ft long USB 3.0 cable, this small/low profile PNY 12volt/2.1amp "Rapid Charge" Car Charger, and this 8ft long Mediabridge USB 3.0 "SuperSpeed" Cable.
I tested combos of each cable(OEM White Samsung Galaxy Note 3 Cable, Amazon Basics Cable, and the Mediabridge Cable) with EACH charger(OEM White Samsung Galaxy Note 3 Wall Charger, Amazon Basics 2.1amp Wall Charger, and the PNY 2.1amp Car Charger) using the "Galaxy Charging Current" app and got the same results all across the board with each combo, even the Samsung Charger/Samsung Cable combo. So unless that app spits out skewed numbers on a consistent basis, I believe it's safe to say that as long as you get a decent quality charger that can truly pump out 2.1amps like the OEM Samsung Charger and a decent cable to pair up with whatever charger you purchase, there's no need to spend the big bucks and go OEM....unless you're just one of those kinds of people that HAS to have OEM everything just for the extra peace of mind and to make sure all of their accessories are of the same matching Samsung brand. I see no reason to spend that kind of money when a MUCH cheaper alternative will get the job done just the same, PLUS the "craftsmanship" and quality of the aftermarket chargers/cables I mentioned appears to be outstanding, if not maybe even a little better than the OEM Samsung combo...besides the fact that the fancy OEM cable has the glossy, white, square-shaped plugs at the each end of the cable with the "SAMSUNG" name emblazoned on them and those aftermarket cables gave me a hard time squeezing past the charger cutout on my Spigen Slim Armor Case(some shaving of the plug is necessary in order for them to fit through my Slim Armor charging cutout).
If you're not concerned with all that fanciness, save yourself quite a few bucks and opt for the cheaper alternatives...just do yourself a favor and do your research first...you WON'T be disappointed. :good::good::good:
Click to expand...
Click to collapse
I'm with you. I've been using that cheap sprint 2amp dual use ac/car charger with the monoprice cables and it charges just as fast as the stock samsung combo.
By the way, ~9 feet (3 meters) is a long ways to charge something.
If you ever notice if you buy one of the cheap cigarette lighter chargers it shows USB charging in the battery properties. This limits it to around 500ma. It must be internally wired to charge at the USB standard. Now buy cigarette Lighter 'fast charger' and it will show AC charging in the battery properties. It must be internally wired to charge at a higher amperage.
Sent from my SM-N9005 using Tapatalk
In the bottom line, only the samsung original cable can charge with maximum power?
No, just a good quality cable imho. Monoprice 6 footer or similar. Only one thing that bothers me with monoprice cable is the wire tends to pull out of the terminated end if you pull at it too much. What I love about them is the terminated ends are small.
Sent from my SM-N9005 using Tapatalk
I just bought two sets of SONICable,The World's Most Advanced Charging Cable, for $49.00. Supposedly, they will increase you charging speed by 2x. It's a crowdfund project, and the cables will supposedly be delivered in March 2015.
I'm not affiliated with the project. I only think it sounds like an exciting product and decided informing the community about it.
Does it work on the same principle as this video for doubling your WiFi speed?
Code:
https://www.youtube.com/watch?v=lG5cEik2ABY
Well while surely there are better and worse cables, doesn't charging speed depends on the output of the wall piece and the charging circuitry?
On bad cables i get at most 1 Amp to charge the tablet, but with the original samsung cable i do get around 2 amps which is the designed output of the wall piece.
Maybe it works like the "Fast Charge" mode on custom kernels.
Charging is limited by 3 factors
1. Stock charger 5 Volts, then most importantly is the Amps - 2A for typical Samsung charger so going faster then this is unlikely with the stock charger, and tablets can already charge at 1890mA so probably 90% of its rated current.
2. Cable quality and length most Samsung cables are already high-quality and have copper wires with two bigger wires for the 5v and Ground line and they are short length (3-6ft) so they can easily handle 2A output (probably higher).
3. Probably the most important is the phone / tablet, usually they have several circuitry and software (kernel) protections to limit the charging speed for several reasons since lithium-ion / poly are extremely dangerous if they are overcharged or overheated or otherwise improperly charged (you can see videos of people overcharging lithium battery's then tapping them causing a huge fireball )
So it is very unlikely for a cable to achieve better charging speed, it probably just has the Data + - pins shorted to tell the charger / phone to charge at full speed (though this is unnecessary nowadays since most chargers already do this, but it could be beneficial for older phones / tablets)
arcadia2uk said:
I just bought two sets of SONICable,The World's Most Advanced Charging Cable, for $49.00. Supposedly, they will increase you charging speed by 2x. It's a crowdfund project, and the cables will supposedly be delivered in March 2015.
I'm not affiliated with the project. I only think it sounds like an exciting product and decided informing the community about it.
Click to expand...
Click to collapse
You seriously spent $49 on a usb lead
From the link you supplied:
'When the switch is ON: All of the power is focused on charging, sync/data is disabled'
What, like using a mains charger where there is no sync connection (or buying a cheap charging cable where the data pins aren't connected)
Hes either a bot or someone paid to advertise that "product". It did remind me of "double your network speed" video from youtube where dude wraps one ethernet cable with another one and doubles his internet speed.
I saw this post a while back, and it was immediately clear to me that it was a scam. I can't BELIEVE that they actually raised over $400k on this thing. Indiegogo seems like it's becoming a scammer's conduit to gullible/uninformed buyers.
When did commercial posts get so frequent in here?
ssmr2t said:
When did commercial posts get so frequent in here?
Click to expand...
Click to collapse
Apparently, there's a difference between buying a sd-card on amazon, or a glass protector on amazon compared with a pair of cables on Indiegogo. Although, I can't really see the difference.
Anyway, if and when I receive the cables I will let you know how it worked out.
Did you get your cables yet? Your OP says they were due in March 2015
Edit: I like this better http://www.google.com/url?sa=t&sour...9QNSmGzx8GP_qMGpQ&sig2=O-5lUKoBFozTFf-A2spM6A
ssmr2t said:
Did you get your cables yet? Your OP says they were due in March 2015
Edit: I like this better http://www.google.com/url?sa=t&sour...9QNSmGzx8GP_qMGpQ&sig2=O-5lUKoBFozTFf-A2spM6A
Click to expand...
Click to collapse
No news as of yet, who knows maybe it is as suggested a hoax. But, as I'm enjoying gadgets I'll take the risk.
arcadia2uk said:
No news as of yet, who knows maybe it is as suggested a hoax. But, as I'm enjoying gadgets I'll take the risk.
Click to expand...
Click to collapse
Keep us posted! Im interested in the results.
I'll probably buy when the price goes down.
Seems like an interesting concept. I'd like to see the cable in real-world action. Assuming they actually make it to market, i'll buy when the price goes down.
Believe it, or not, but I actually received my cables last week. The charging speed is substantially improved, but definitely not 2x. However, I still haven't tried charging by connecting over the PC, where this might show up. Anyway, as a fan of gadgets I still satisfied with my purchase.
I'm glad your happy with your purchase.
Charging speed is limited by the circuitry in the tablet itself. There's a limit in the amount of amps it can pull from anything (charger/computer or any USB port). I have an extremely powerful charger so I'm sure I hit the max charging rate of my devices. This cable will not improve that. I'm also sure that it's actually charging faster and drawing more power than my original chargers as some devices act a bit weird when charged fast.
The "twice as fast" charging rate will be the exact same charging rate as you get from a "charge only" cable if (and only if) you connect it to a computer or another device that syncs data. In every other scenario you'll get the exact same charging rate.
Note that your computer typically has a USB port for charging that's capable of drawing more power than the standard 500 mA that USB 1 and 2 offer. (USB3 can draw 900 mA, up to 1500 mA if it's a charging port)
Keep in mind that the stock charger output is 5.3 volts.
Lower impedance cable helps.
Samsung stock cable is good enough, and PNY cable also does a good job.
You can have the same thing on eBay for $6 ...
http://www.ebay.com/itm/USB-smart-c...-Apple-Android-With-V-A-display-/141342314642
A charge only cable so you get maximum charge speed starts at only £5
http://www.portablepowersupplies.co.uk/portapow-fast-charge-micro-usb-cable/
An choice of USB Charging adapter, but do you really need these?
http://www.portablepowersupplies.co.uk/portapow-fast-charge-data-block-usb-adaptor/
John.
If you have 5 port 8 amp IQ charger, you can charge T520 faster.
ssmr2t said:
Did you get your cables yet? Your OP says they were due in March 2015
Edit: I like this better http://www.google.com/url?sa=t&sour...9QNSmGzx8GP_qMGpQ&sig2=O-5lUKoBFozTFf-A2spM6A
Click to expand...
Click to collapse
Yes I got my cable, and the 2x works if you charge through your computers USB, as what the cable does is cutting off the communication to charge only. I saw a post at XDA that explain how to do this by yourself in about 5-10 min.
I'm looking for a good QC 2.0 cable that is either equal or better than the stock cable. I'd like it to be at least 6 ft. Any suggestions?
xxSHADYxx said:
I'm looking for a good QC 2.0 cable that is either equal or better than the stock cable. I'd like it to be at least 6 ft. Any suggestions?
Click to expand...
Click to collapse
Portapow make one:
www dot portablepowersupplies dot co dot uk/portapow-20awg-fast-charge-sync-micro-usb-cable/
Not available on there yet, but they are on Amazon US: Search for PortaPow Specialised 3.3ft 20AWG Charge Only Micro USB Cable for Blackberry, or item code B00RL68RNS
(Sorry about the url formatting - I'm too new to be able to post them)
If the Cable does Charge ONLY, then it wont work for QC charging......QC charging requires the cable to have both power and data.....
I've been using mono price premium cables. Turbo charger charges noticeably faster then a standard charger. Never compared vs the stock cable
I have been using these by media bridge. Have had them for a while, before I had my nexus. Works great and nice quality, seems to charge as fast if not faster.
Mediabridge USB 2.0 - Micro-USB to USB Cable (6 Feet) - High-Speed A Male to Micro B with Gold-Plated Connectors - 2 Pack https://www.amazon.com/dp/B00KLI62BM/ref=cm_sw_r_awd_gQGdvb0BNNAYF
I'm using an extra cable from a GS4 wall charger. They are long. Don't know why nexus devices ship with such short cables.
Edit: official Samsung GS4 wall chargers are on amazon for like 9 dollars.
Search is your friend
http://forum.xda-developers.com/nexus-6/accessories/usb-cable-quick-charge-2-0-t3013942
Anker hands down is the best and it has a warranty and customer service to back it. Not all cables are created equal.
http://www.amazon.com/Anker%C2%AE-Extra-Premium-Android-Samsung/dp/B00MLP3JMS/ref=sr_1_3?ie=UTF8&qid=1427076204&sr=8-3&keywords=anker+micro+usb
I picked up one of the anker ones and i am impressed with its build quality! I cant really tell if it charges at the same rate as the stock cable, but it doesnt feel terribly slow or extremely fast. Im very happy with it though!
I second Anker. I have two 5ft and work just fine with quick charger.
interesting...I always thought that the QC ability came from the wall connector..not the actual cable. I used regular plain jane cables with my QC wall adapter, and they worked just as well as the one that came with the phone...hrmm
Tower1972 said:
interesting...I always thought that the QC ability came from the wall connector..not the actual cable. I used regular plain jane cables with my QC wall adapter, and they worked just as well as the one that came with the phone...hrmm
Click to expand...
Click to collapse
It's built into the phone and the charger. The cable has little to do with it. Other than that all of the pins must be connected, no charge-only cables. The device and charger have to agree on the voltage, and they talk over the data pins to do that. That way, the QC chargers don't destroy devices that can't handle the extra voltage. The thicker power wires have a lower voltage drop, which is nice, and very important for non-QC devices. For QC it's less important, but if they are available, get them. I happened to already have the ones I'm using, so I tried them. They work great.
I'm using a 5' cable from amazon (bought a while ago) and a 5' extension cable from an old USB WiFi adapter I think. Quick charge still shows up and charges real fast.