Lollipop High Volume Sound MOD
From much people, i have heared, that the sound of the Z Ultra, is not very loud, but i have fixed that for Lollipop ROMS
That are only modified mixer_paths.xml and audio_policy.conf (only V2) documents
You find 3 Categories: Loud, Louder and Loudest
Loud: is louder than normal but not too high
Louder: is very loud, only use at your risk
Loudest: is very very loud, only use at your risk
Installation Guide:
Rename the original mixer_paths.xml on /system/etc/ to mixer_paths.xml.bak
Copy the modded mixer_paths.xml file to /system/etc/ and set the permissions to rw-r--r-- or 0644
Do the same with the audio_policy.conf file
Rename the original audio_policy.conf on /system/etc/ to audio_policy.conf.bak
Copy the modded audio_policy.conf file to /system/etc/ and set the permissions to rw-r--r-- or 0644
Reboot your system
Sorry for my very Bad english
Changelog:
V1:
Initial Release
V2:
Added high Sampling Mod (192kHz 24bit PCM)
Added bugfixes
V3:
Added Support for Sony Lollipop Stock Rom (14.5.A.0.242)
Soundmod Add-on V1:
WARNING!!! That is a flashable zip and Lollipop soundmod V3 is not included in there.
It is only a Add-on
Before Flashing do a Nandroid Backup
This includes MaxxAudio, Xloud and DSEE-HX
I think it works on all roms, I have tested it with stock Lollipop and iT works well
V5:
Includes new way to boost speaker sound clearly
High Sampling added on Sony Stock Version
Speaker & Headphone Hi-Res Playback on Sony Stock version
Speaker Regulation enabled
Headphone Regulation enabled (Sony Stock)
V6:
Bass Regulation Enabled
SLIMBUS_0_RX enabled
V7:
Higher SampleRate and Bit deepness (384kHz 32 bit)
Check my new Soundmod :
http://forum.xda-developers.com/xpe...undmod-lollipop-sound-enchantment-v1-t3105044
Thank you for 2000 Downloads, you are the best
Thanks @pretty pixel who tests for me the soundmod before uploading on XDA
Please share this project, like that Project and keep cool
And thanks to my Friend Carla��, who gave me the power to do this soundmod and more, who makes me happy every time, who helps me on bad times:��
I will never forget that, thank you so much...
You are so beautiful
Your the-cortana-project
Editing system files
Installation Guide:
Rename the original mixer_paths.xml on /system/etc/ to mixer_paths.xml.bak
Copy the modded mixer_paths.xml file to /system/etc/ and set the permissions to rw-r--r-- or 0644
Reboot your system
I hope that works, when not, i will fix that
Sorry for my very Bad english[/QUOTE]
Followed these steps but ES File Explorer fails to rename mixer_path.xml.
Rooted, C6833, CM 12.1, all features enabled in ES File Explorer.
PS: I have the same issue when trying to move app to system/app, it fails constantly. I used to do it with ease in Kitkat but dosen't seem to work in Lollipop.
Thanks.
halifage said:
Installation Guide:
Rename the original mixer_paths.xml on /system/etc/ to mixer_paths.xml.bak
Copy the modded mixer_paths.xml file to /system/etc/ and set the permissions to rw-r--r-- or 0644
Reboot your system
I hope that works, when not, i will fix that
Sorry for my very Bad english
Click to expand...
Click to collapse
Followed these steps but ES File Explorer fails to rename mixer_path.xml.
Rooted, C6833, CM 12.1, all features enabled in ES File Explorer.
PS: I have the same issue when trying to move app to system/app, it fails constantly. I used to do it with ease in Kitkat but dosen't seem to work in Lollipop.
Thanks.[/QUOTE]
It works with Root Explorer, maybe with another File Explorers, really that issue is New for me
I am looking to fix that permanently
It works with Root Explorer, maybe with another File Explorers, really that issue is New for me
I am looking to fix that permanently[/QUOTE]
Does it work with the free version or only with the paid version?
Because i tried the free version but couldn't get it to work, gives me same error as ES: "the file is read only" or something like that.
halifage said:
It works with Root Explorer, maybe with another File Explorers, really that issue is New for me
I am looking to fix that permanently
Click to expand...
Click to collapse
Does it work with the free version or only with the paid version?
Because i tried the free version but couldn't get it to work, gives me same error as ES: "the file is read only" or something like that.[/QUOTE]
You must Mount To R/W on the "Mount R/W button" , maybe you must change SELinux mode to permissive
Sorry but that is a very New issue
the-cortana-project said:
Does it work with the free version or only with the paid version?
Because i tried the free version but couldn't get it to work, gives me same error as ES: "the file is read only" or something like that.
Click to expand...
Click to collapse
You must Mount To R/W on the "Mount R/W button" , maybe you must change SELinux mode to permissive[/QUOTE]
How do i change SELinux to permissive?
Thanks
halifage said:
You must Mount To R/W on the "Mount R/W button" , maybe you must change SELinux mode to permissive
Click to expand...
Click to collapse
How do i change SELinux to permissive?
Thanks[/QUOTE]
With SELinux Mode Changer
Link: http://forum.xda-developers.com/showthread.php?t=2524485
Download it, give them Root Access and set to permissive
the-cortana-project said:
How do i change SELinux to permissive?
Thanks
Click to expand...
Click to collapse
With SELinux Mode Changer
Link: http://forum.xda-developers.com/showthread.php?t=2524485
Download it, give them Root Access and set to permissive[/QUOTE]
thanks a lot man :good:
halifage said:
With SELinux Mode Changer
Link: http://forum.xda-developers.com/showthread.php?t=2524485
Download it, give them Root Access and set to permissive
thanks a lot man :good:
Click to expand...
Click to collapse
Does it work ?
the-cortana-project said:
Does it work ?
Click to expand...
Click to collapse
Nope.
Here is what i did:
- installed the SELinux permission changer
- set it to permissive
-rebooted
-opened ES File Explorer and tried to rename the mixer_paths.xml file but failed (read only)
- installed root explorer (free version) and did the same but got the same error.
Is it something i'm doing wrong?
halifage said:
Nope.
Here is what i did:
- installed the SELinux permission changer
- set it to permissive
-rebooted
-opened ES File Explorer and tried to rename the mixer_paths.xml file but failed (read only)
- installed root explorer (free version) and did the same but got the same error.
Is it something i'm doing wrong?
Click to expand...
Click to collapse
Okay than do it in another way
Copy the mixer_paths.xml From /system/etc/ to your internal Storage and rename It From there, than copy the renamed file back to /system/etc/
To rename the mixer_paths.xml is not recommend but it is useful when my modded mixer_paths.xml doesn't work, to restore the old mixer_paths.xml )
the-cortana-project said:
Okay than do it in another way
Copy the mixer_paths.xml From /system/etc/ to your internal Storage and rename It From there, than copy the renamed file back to /system/etc/
Click to expand...
Click to collapse
Nope unfortunately :crying:
halifage said:
Nope unfortunately :crying:
Click to expand...
Click to collapse
So that is the last idea I have:
I created a flashable zip only for cm12.1
Flash that in a recovery and reboot, that is my last idea
MAKE A NANDROID BACKUP before flashing
What version should I use on CM12?
the-cortana-project said:
So that is the last idea I have:
I created a flashable zip only for cm12.1
Flash that in a recovery and reboot, that is my last idea
MAKE A NANDROID BACKUP before flashing
Click to expand...
Click to collapse
Thanks
Will try it when i go back to CM12.1.
For now I'm on blisspop which has loud sound enabled by default?
Aphex13 said:
What version should I use on CM12?
Click to expand...
Click to collapse
I Think the same then LiquidSmooth (SlimLP) but i am not sure, please backup your original mixer_paths.xml when something goes wrong
the-cortana-project said:
I Think the same then LiquidSmooth (SlimLP) but i am not sure, please backup your original mixer_paths.xml when something goes wrong
Click to expand...
Click to collapse
The LiquidSmooth (SlimLP) version works perfectly on CM12. Thank you for your work!
i test it on cm12
with " solid explorer"
and yes ..WORKED
Tomorrow I will upload a New Version of my Soundmod, it will fix some Problems with the mic and allows high sampling to 192kHz with 24 Bit coding on r_Submix
I have tested it and it works perfectly with Sony MDR ZX600
If i have my Sony MDR 1ADAC, i will do the same for USB Devices
Lollipop Sound Mod V2 Uploaded
Related
Hello, this is my first post on XDA
in the "Development" section I've read about a camera mod: http://forum.xda-developers.com/showthread.php?t=1104051.
It add some good feature to the camera stock app like:
Records Audio in 192kbps/44.1Khz quality (CD Quality) rather than stock (64kbps/16khz quality)
Increased Video Bitrate in 1080 and 720p modes* (See 2nd post for info and download link for this version)
I would to try this hack, but I am confused on witch APK to download and use, the Potatoman and the hyperX-'s release are identical or not?
i believe there is only one mod as of right now. The mod you posted above is based off of the original and does nothing but improve the camera. Safe to say this is THE mod to use my friend!
blunted09 said:
i believe there is only one mod as of right now. The mod you posted above is based off of the original and does nothing but improve the camera. Safe to say this is THE mod to use my friend!
Click to expand...
Click to collapse
Thank you!
So I can download the modded APK from here without problems? Is it THE mod?
You can dl it from here or glash one of the fantastic roms that have it included.
Now I am trying to install the camera hack on my phone, I renamed the original Camera.apk in Campera.apk.bak and copied the hacked Camera.apk in /system/app, but when I try to execute it to install, the installation starts but it ends with message "Application not installed", why?
What'is my error?
I use Root Explorer...
You don't have to install it after copying to system/app, just copy, then set permissions correct and reboot..
DruNKfuX said:
You don't have to install it after copying to system/app, just copy, then set permissions correct and reboot..
Click to expand...
Click to collapse
Thank you, now I try, but witch are the correct permissions?!?
EDIT: I set permissions to rx-r--r-- like the original app, now it seems work!
I recorded a video at 720p with the hacked Camera.apk, I controlled media info with VLC and with Windows Explorer "Property->Details" tab, the value they show are 11880 kbps for the video bitrate and 16 kHz, 60 kbps, mono for audio. I think that there are the value for a video recorded with default app, or not?
Help pleaseee!!!
hey, i am trying to hack my camera too, how do you move the camera.apk to system/app if i have it in my file/download, thanks
thomasching said:
hey, i am trying to hack my camera too, how do you move the camera.apk to system/app if i have it in my file/download, thanks
Click to expand...
Click to collapse
You must have rooted your phone and you must use a file manager like Root Explorer!
i know, my phone is rooted and have root explorer installed. But i can't paste anything on system/app from my file/download, i could just move files around in my file
thomasching said:
i know, my phone is rooted and have root explorer installed. But i can't paste anything on system/app from my file/download, i could just move files around in my file
Click to expand...
Click to collapse
Mount the filesystem in R/W mode (read and write), default setting is RO (read only), use the button in the upper side of the screen.
i know this step, i mean, how do you paste the .apk to system/app from the bluetooth folder in my file? because i use bluetooth to transfer the .apk into my phone, but i have no idea how to paste it into root explorer, seems like i can only move it around to those folders in my file. i know i am such a noob, sorry for asking so many silly questions.
thomasching said:
i know this step, i mean, how do you paste the .apk to system/app from the bluetooth folder in my file? because i use bluetooth to transfer the .apk into my phone, but i have no idea how to paste it into root explorer, seems like i can only move it around to those folders in my file. i know i am such a noob, sorry for asking so many silly questions.
Click to expand...
Click to collapse
You must navigate throught your phone's filesystem with Root Explorer, find the folder where the file Camera.apk is (I think it is /sdcard/bluetooth) copy the file and paste it in /system/app (all operation of copy/move/paste are possible with Root Explorer).
I hope I help you, I'm Italian and I'm not a native speaker of English...
i am not native english speaker either, haha
i am from Hong Kong
i am gonna try it, but i messed it up this afternoon and i had to reset everything on my phone lol because the camera didn't work
I tried replace the Poweron.wav in sys/etc
but it said copy failed.
I'm on the latest siyah kernel
wanewon said:
I tried replace the Poweron.wav in sys/etc
but it said copy failed.
I'm on the latest siyah kernel
Click to expand...
Click to collapse
take it you have set correct permissions and changed ownership of file ??
and the file is poweron.ogg not wav
DJBoxer said:
take it you have set correct permissions and changed ownership of file ??
and the file is poweron.ogg not wav
Click to expand...
Click to collapse
how do I do that? I just watched a youtube video on how to change the boot sound. and I failed..: (
and I downloaded the original S2 boot animation and sound from this thread:
http://forum.xda-developers.com/showpost.php?p=24910851&postcount=22359
and it's in wave format..
wanewon said:
how do I do that? I just watched a youtube video on how to change the boot sound. and I failed..: (
and I downloaded the original S2 boot animation and sound from this thread:
http://forum.xda-developers.com/showpost.php?p=24910851&postcount=22359
and it's in wave format..
Click to expand...
Click to collapse
yes most prob wav not used cm9 myself but on most sammy ones it ogg but anyways try this navigate to system/etc using root explorer make sure its set to RW then copy/move/paste file into location then change owner to root/root and set permissions to RW-R-R .
hopefully this will work for you if not trying renaming file to ogg
DJBoxer said:
yes most prob wav not used cm9 myself but on most sammy ones it ogg but anyways try this navigate to system/etc using root explorer make sure its set to RW then copy/move/paste file into location then change owner to root/root and set permissions to RW-R-R .
hopefully this will work for you if not trying renaming file to ogg
Click to expand...
Click to collapse
ahh. I got the problem fixed. I didn't enable root access and system files as writable. now it worked.
I replaced the poweron.wav successfully.
but,
the sound doesnt play during the boot animation...-__-
wanewon said:
I replaced the poweron.wav successfully.
but,
the sound doesnt play during the boot animation...-__-
Click to expand...
Click to collapse
yes but do all the steps i stated even tho you added the file dosent mean its gonna work set the permissions correctly etc and also i mentioned to change file from wav to ogg as a last resort but hmmm i swear that it is ogg for power on but not sure as i find it annoying upon boot lol
DJBoxer said:
yes but do all the steps i stated even tho you added the file dosent mean its gonna work set the permissions correctly etc and also i mentioned to change file from wav to ogg as a last resort but hmmm i swear that it is ogg for power on but not sure as i find it annoying upon boot lol
Click to expand...
Click to collapse
Root explorer as in the one thats $3.99 at the playstore??
You can't just rename the file from wav to ogg. They are different file formats. You need to convert it.
ctomgee said:
You can't just rename the file from wav to ogg. They are different file formats. You need to convert it.
Click to expand...
Click to collapse
so it is really ogg?
the default one that was already in the folder is in wav
wanewon said:
so it is really ogg?
the default one that was already in the folder is in wav
Click to expand...
Click to collapse
Depends. Apparently it should be wav for GB, ogg for ICS.
well I'm using resurrection ICS remix 2.0 if that helps.
and waiting for the root explorer reply.
wanewon said:
well I'm using resurrection ICS remix 2.0 if that helps.
and waiting for the root explorer reply.
Click to expand...
Click to collapse
So... Given the name of the ROM, surely you can determine if it's GB or ICS... Yes?
You can use any file explorer that gives root access. Root Explorer is just one of them. ES File Explorer is another.
However, I don't think Resurrection Remix supports boot sounds at all, but I'm not positive about that. Someone who uses that ROM will have to answer that.
ctomgee said:
So... Given the name of the ROM, surely you can determine if it's GB or ICS... Yes?
You can use any file explorer that gives root access. Root Explorer is just one of them. ES File Explorer is another.
However, I don't think Resurrection Remix supports boot sounds at all, but I'm not positive about that. Someone who uses that ROM will have to answer that.
Click to expand...
Click to collapse
downloaded a Poweron.ogg as well. and I just figured out the permission management thing and I turned on all the permissions. still no luck. As for the ownership thing that the other poster was talking about. I dont know how to do in es explorer.
anyway, I tried both ogg and wav. maybe you could be right that ICS remix doesnt support boot sounds
OK everyone, there seems to be mass confusion on what to do to get Viper4Android running, this guide should help clear that confusion.
DO NOT USE THESE FILES UNLESS YOU HAVE A NEXUS 6P. SO MANY PEOPLE HAVE ISSUES BECAUSE THEY USE FILES DESIGNED FOR OTHER PHONES.
Firstly: Are you running normal root or systemless root?
If you are running systemless root I suggest you switch over to normal root to get things working. So far, systemless root has been a roadblock for some people and Viper4Android starts acting up with systemless root installed.
Secondly: Have you flashed any of the billion V4A recovery flashable zips?
If yes, restore your system partition as those have a billion and one differently modified files that will probably screw over how your phone functions.
Thirdly: Do you have enough room in the /system and /vendor partitions?
Install the Busybox binaries (linked below) and open a terminal (using your favorite terminal app, or Terminal Emulator) and run
Code:
df
and make sure that you have enough room for the files.
If your /system partition is full, try deleting common apps like Chrome or Drive and install them from the Play Store as user apps instead.
If your /vendor partition is full, there isn't much to fix other than if you installed overlays for Layers, try uninstalling one (some overlays can go up to 400KB, like ones for Chrome). However, it may seem that you don't need to worry about the /vendor partition, more on that below.
OK, now it is time to continue.
If you don't want to follow this guide, then you can use Lollviper's recovery flashable zip, as it works just fine. Use the standard zip, and not the surround zip: http://forum.xda-developers.com/google-nexus-5/themes-apps/discussion-viper4android-t2543796
Choose your favorite v2.3.4.0 version of V4A and install it to /system/priv-app/. Just create a folder with the same name as the APK, give it the same permissions as the other folders, and drop the APK in it making sure to also give it the permissions that the other APKs get. If you encounter issues with a customized version of V4A, I suggest you use the standard version. So far, Lolliviper seems to work.
Make sure to install BusyBox, I recommend this one: https://play.google.com/store/apps/details?id=stericson.busybox
If the files linked below can't be downloaded, use the zip file at the bottom of this post and continue following the guide.
Now, download this file (49_viper4android.sh) : https://www.dropbox.com/s/rcp77ul41m...ndroid.sh?dl=0
And create a folder called su.d in /system/. The path should be /system/su.d/, and then give it permissions 0700 with root:root, and drop the script into the folder with permission 0755 with root:root. This script will allow V4A access to mediaserver, so it can see audio to do it's magic. You can make sure that the script worked on boot by checking /data/v4a_script.txt for if it exists, or, was modified recently to correlate with you booting your phone.
Now do the same for this file (audio_effects.conf) : https://www.dropbox.com/s/57y44o74dk...ects.conf?dl=0
And drop the file in /system/etc/ AND in /system/vendor/etc/ (alternatively you can go to /vendor/etc/ as it's actually the same folder). Both of the files should have permissions 0644 with root being the owner and group. This modified file will allow V4A to be used as an equalizer and allow it to do magic in your audio. Quick note, if V4A keeps asking to install the driver, then delete the audio_effects.conf in /system/vendor/etc/ and don't worry about it.
Now the file which will allow V4A to work system-wide, like in YouTube (audio_policy.conf) : https://www.dropbox.com/s/yi8u3j91z3...licy.conf?dl=0
And drop it in /system/etc/ and give it permissions 0644 with root being owner and group, and you are good to go. This modified file removes the "deep_buffer" module that made it so apps that don't hook into Viper4Android (apps that aren't music players) wouldn't have their audio processed. Some of the flashable zips included modified files, but usually only for the Nexus 5.
Now disable or delete the app MusicFX:
This is necessary as Google Play Music will use MusicFX over Viper4Android if the app isn't disabled.
That should be it, you can now continue with your installation of Viper4Android and it should work.
Issues:
Viper4Android still doesn't work!
Click to expand...
Click to collapse
Are you sure you followed the guide correctly? Wipe everything and start fresh because if you used recovery flashables they do stuff they really shouldn't.
My headphones don't work.
Click to expand...
Click to collapse
Another potential issue with random recovery flashables, suggest you wipe and start again.
Viper4Android's driver doesn't stick.
Click to expand...
Click to collapse
Install Viper4Android to /system/priv-app/ and that should fix your issue.
OR
Delete the audio_effects.conf file from /system/vendor/etc/.
Viper4Android doesn't work in Google Play Music.
Click to expand...
Click to collapse
Remove the MusicFX app.
Viper4Android doesn't work in YouTube.
Click to expand...
Click to collapse
Make sure you did the proper steps for the audio_policy.conf file.
worked like a charm. Thanks mate!!!
Why do you guys need this? Audio reproduction is excellent and this will only make it sound worse. The only way to improve the sound would be better headphones and/or amp.
Thanks @Namelesswonder for the help .. I have not used your steps might use them based on other users findings and plus these steps will have to redone upon every ROM flash..
I believe all this could be done with a flashable zip , I know we had flashable zips for Nexus5.
@AndrasLOHF I see you have Nexus6P now , will you be able to help us out
Thanks
likonvampire said:
Thanks @Namelesswonder for the help .. I have not used your steps might use them based on other users findings and plus these steps will have to redone upon every ROM flash..
I believe all this could be done with a flashable zip , I know we had flashable zips for Nexus5.
@AndrasLOHF I see you have Nexus6P now , will you be able to help us out
Thanks
Click to expand...
Click to collapse
I haven't rooted or anything yet. From my experience on all the dev previews I would think the Lolliviper zips would still install fine just as they used to. Just don't use the Surround Sound zip.
Thank you! Works great on Nexus 6p. Can't live without the Viper.
designgears said:
Why do you guys need this? Audio reproduction is excellent and this will only make it sound worse. The only way to improve the sound would be better headphones and/or amp.
Click to expand...
Click to collapse
You must be unaware the audio sound is completely subjective.
AndrasLOHF said:
I haven't rooted or anything yet. From my experience on all the dev previews I would think the Lolliviper zips would still install fine just as they used to. Just don't use the Surround Sound zip.
Click to expand...
Click to collapse
Yeah, I just checked it and Lolliviper flashable does work just fine, I'll put it up in the post. My intent for this post was to just outline how to install it without using flashable zips as people were using the wrong ones and having troubles.
Shockz said:
You must be unaware the audio sound is completely subjective.
Click to expand...
Click to collapse
You misread what I said. If you like crappy sound, you like crappy sound, nothing can be done about that. Running audio thru any software filter will degrade the quality, period.
I flashed the lolliviper zip, but viper4android keeps asking me to install drivers (even after install and reboot).
Edit: I'll re-flash and wipe dalvik/cache and try again.
Edit 2: Yup, still having the same issue. It also takes awhile for the driver install to happen too (even though it doesn't actually work).
mugenga said:
I flashed the lolliviper zip, but viper4android keeps asking me to install drivers (even after install and reboot).
Edit: I'll re-flash and wipe dalvik/cache and try again.
Edit 2: Yup, still having the same issue. It also takes awhile for the driver install to happen too (even though it doesn't actually work).
Click to expand...
Click to collapse
OK then, try using my way instead. Weird, because flashing the zip worked for me. Do you have systemless root? Try renaming the audio_effects.conf in /vendor/etc/, checking the permissions on audio_effects.conf and audio_policy.conf in /system/etc/, and checking that the 50viper.sh file in /system/su.d/ at least has permissions 0755.
Namelesswonder said:
OK then, try using my way instead. Weird, because flashing the zip worked for me. Do you have systemless root? Try renaming the audio_effects.conf in /vendor/etc/, checking the permissions on audio_effects.conf and audio_policy.conf in /system/etc/, and checking that the 50viper.sh file in /system/su.d/ at least has permissions 0755.
Click to expand...
Click to collapse
I don't have systemless root, but I'll look into the permissions.
Edit: All my permissions look fine. I'll try and tinker around some more. Still not sure why the driver isn't installing.
You probably need more space in the system partition. Delete an app and reinstall from there play store.
---------- Post added at 19:46 ---------- Previous post was at 19:46 ----------
You probably need more space in the system partition. Delete an app and reinstall from the play store.
AndrasLOHF said:
You probably need more space in the system partition. Delete an app and reinstall from there play store.
---------- Post added at 19:46 ---------- Previous post was at 19:46 ----------
You probably need more space in the system partition. Delete an app and reinstall from the play store.
Click to expand...
Click to collapse
I have 1.8GB free in my system/root partition.
Edit: I solved my issue. I had to delete audio effects conf from system/vender/etc
mugenga said:
I have 1.8GB free in my system/root partition.
Edit: I solved my issue. I had to delete audio effects conf from system/vender/etc
Click to expand...
Click to collapse
Thanks a lot for this. I was having same issue and this worked for me.
I did flash the lolliviper zip , the processing worked with pocketcast app but no go with SoundCloud...
Sent from my Nexus 6P using Tapatalk
mugenga said:
I have 1.8GB free in my system/root partition.
Edit: I solved my issue. I had to delete audio effects conf from system/vender/etc
Click to expand...
Click to collapse
Yes worked like a charm!
Hi guys,
How does this improve audio quality from the speakers? Coming from Boomsound the speakers on the 6P seem to lack any kind of bass. Could viper help in that department?
Sent from my HTC One using XDA Free mobile app
tgeza said:
Hi guys,
How does this improve audio quality from the speakers? Coming from Boomsound the speakers on the 6P seem to lack any kind of bass. Could viper help in that department?
Sent from my HTC One using XDA Free mobile app
Click to expand...
Click to collapse
Anyone?
Sent from my HTC One using XDA Free mobile app
tgeza said:
Anyone?
Sent from my HTC One using XDA Free mobile app
Click to expand...
Click to collapse
Because you can tune the way the speakers sound to your liking. It makes the phones speaker and any headphones sound much better than they normally do.
is it possible to change dpi in miui without having weird icons .
Camlin3 said:
is it possible to change dpi in miui without having weird icons .
Click to expand...
Click to collapse
Use any file explorer like Es explorer etc.
Go to /system/build.prop
Add this line in the build.prop
ro.sf.lcd_density=the value you want.
Save the file and reboot
gulshanstrider said:
Use any file explorer like Es explorer etc.
Go to /system/build.prop
Add this line in the build.prop
ro.sf.lcd_density=the value you want.
Save the file and reboot
Click to expand...
Click to collapse
Done already cause icon got distorted like a small square protude seperate from whole icon.
Use easy dpi changer from playstore. Then add/modify ro.sf.lcd_density=x in build.prop in case the dpi change messes up icons and images in apps.
adizz4 said:
Use easy dpi changer from playstore. Then add/modify ro.sf.lcd_density=x in build.prop in case the dpi change messes up icons and images in apps.
Click to expand...
Click to collapse
Ok i will try again,but i ran into other problem in nougat roms ,i cant edit any txt file via es file explorer integrated text editor,pls have a look ,is it app bug ? Sorry screenshot not uploading .it says error occured while saving file and create a tmp file with same name in directory.
Camlin3 said:
Ok i will try again,but i ran into other problem in nougat roms ,i cant edit any txt file via es file explorer integrated text editor,pls have a look ,is it app bug ? Sorry screenshot not uploading .it says error occured while saving file and create a tmp file with same name in directory.
Click to expand...
Click to collapse
Flash latest supersu and try, someone else had the same problem.
I use root explorer and sr1 2.79 ssu and everything works fine.
(assuming you're trying to edit build.prop)
Use imgur or some other image host to share images, xda upload seems to be broken rn.
adizz4 said:
Flash latest supersu and try, someone else had the same problem.
I use root explorer and sr1 2.79 ssu and everything works fine.
(assuming you're trying to edit build.prop)
Use imgur or some other image host to share images, xda upload seems to be broken rn.
Click to expand...
Click to collapse
No ,its in nougat ,even a txt file in sdcard cant be edited with es file explorer.in mm ,it works fine.
Camlin3 said:
No ,its in nougat ,even a txt file in sdcard cant be edited with es file explorer.in mm ,it works fine.
Click to expand...
Click to collapse
That's really weird.
You could try a different app I guess.
adizz4 said:
That's really weird.
You could try a different app I guess.
Click to expand...
Click to collapse
Ya i know ,it seems like app bug,i used fx file explorer.
Camlin3 said:
No ,its in nougat ,even a txt file in sdcard cant be edited with es file explorer.in mm ,it works fine.
Click to expand...
Click to collapse
Use Kernel Auditor or Build prop editor app
gulshanstrider said:
Use Kernel Auditor or Build prop editor app
Click to expand...
Click to collapse
I am only enquiring abt es file explorer ,other goes well
Thanks for reply
here's a full youtube tutorial that doesn't affect icons
https://www.youtube.com/watch?v=btabIccFrHY
This is the all in one zip file with some extra functionality for honor 6x.
The file will give you some useful utilities like hw intelligent , call record , autorun, hp plugin, music with cutter, parent control.
REQUIREMENT:
1. ROOT , TWRP RECOVERY.
2. ANY ROOT EXPLORER.
STEPS:
1. OPEN ANY ROOT EXPLORER AND NAVIGATE TO SYSTEM/PRIV-APP/GOOGLE PACKAGE INSTALLER
2. DELETE THE FOLDER GOOGLE PACKAGE INSTALLER.
3. REBOOT TO RECOVERY , FLASH THE DOWNLOADED ZIP .
THATS IT , YOU HAVE DONE IT.
Download links below :
http://gestyy.com/wrLHXH
screenshots
http://gestyy.com/wrLGLz
Thanks
XDA:DevDB Information
EXTRA UTILITIES FOR HONOR 6X, Tool/Utility for the Honor 6X
Contributors
Khan ubaid
Version Information
Status: Testing
Created 2017-11-05
Last Updated 2017-11-05
It doesn't work on 6X BLN21, bootloop on start after flashed the zip !
MiPiMok said:
It doesn't work on 6X BLN21, bootloop on start after flashed the zip !
Click to expand...
Click to collapse
You can go for manual setup ,
1. Extract the zip file, you will get HwCallrecord, HwParent, HwIntelligent under system/app
and PackageInnstaller, HwMediacenter, HpPlugin under system/priv-app.
2. Copy these files in corresponding directory by using any root explorer under root/system/app and root/ystem/priv-app.
3. If you want package installer with autorun and backgroung run facility, you have to delete the GooglePackageInstaller under /root/system/priv-app/GooglePackageInstaller.
4.Give permission to the apk files as well as folders, How? go through screenshots.
5. Reboot, Enjoy
Any queries, you can ask....
Remember to give permission to every folders and files you place or replace...
MiPiMok said:
It doesn't work on 6X BLN21, bootloop on start after flashed the zip !
Click to expand...
Click to collapse
Permission to odex file also...
http://q.gs/Dx2KW
Done ! And it works, thanks.
Welcome buddy...
Hi, I've got problem with HwParent and HwIntelligent, how install them if they are not installed in the original ROM...because I can't install them normally...package corrupt it says me....
you cannot install them normally, they have to be placed in the system partition and changing the permission as i have already given the screenshots...
Thank you
Hey,
thank you for explaining the manual way - that helped me a lot and also fixed a second problem i have had.
The problem was, that after the update my FM Radio was gone.
I found the app here but i cant push files by ADB as root. So i just installed doing the same way:
i copied the apk to an own folder to /system/app/ , set permissions, rebbooted and it worked perfect.
all your apps are working too.
Except the parental controll - i didnt install it because nothing planned yet... ^^
starkeeper2018 said:
Hey,
thank you for explaining the manual way - that helped me a lot and also fixed a second problem i have had.
The problem was, that after the update my FM Radio was gone.
I found the app here but i cant push files by ADB as root. So i just installed doing the same way:
i copied the apk to an own folder to /system/app/ , set permissions, rebbooted and it worked perfect.
all your apps are working too.
Except the parental controll - i didnt install it because nothing planned yet... ^^
Click to expand...
Click to collapse
Thats good.... keep it up,,
and about parent control should work too, after installing by the given procedure is done,,, you will find it under setting/additional setting /student mode
Khan ubaid said:
you cannot install them normally, they have to be placed in the system partition and changing the permission as i have already given the screenshots...
Click to expand...
Click to collapse
OK sorry, it was badly asked... I did it as you explained and I succeed to install them but I can't find where to activate them... Now, I find the parent control in the advanced settings with the "student app" with the last post and it works but where I can find or activate the "intelligent" smart assistance app ? And about the package installer, I pasted it in the priv-app file but what happens now ?
MiPiMok said:
OK sorry, it was badly asked... I did it as you explained and I succeed to install them but I can't find where to activate them... Now, I find the parent control in the advanced settings with the "student app" with the last post and it works but where I can find or activate the "intelligent" smart assistance app ? And about the package installer, I pasted it in the priv-app file but what happens now ?
Click to expand...
Click to collapse
After you paste the package installer and gave permission , you have to delete( or cut to make a copy of ) google package installer,,, it will be activated when you remove google package installer folder in the same directory
link dead
Link dead need mirror for the same
.
does anybody have the apps from the link?
can someone reupload it?