First of all, I'd like to say that I am not a developer. I am just a normal user here.
As you know, just because of our device N900A's boot loader is locked by AT&T and Samsung, we are not as lucky as other Note 3's users to enjoy Lollipop updates since the early of Feb 2015. Finally, we have been waiting until the end of Mar 2015 to get Lollipop updates. It is lucky enough for us to have Lollipop kernel to make the Lollipop roms for other Note 3 devices working on our N900A.
A very big thanks to @nambavuong for a great Note 4 ported rom for Note 3. With his permission, I have re-ported DarkLord Rom v2.2 by removing aroma installer from the rom so that it can be installed via Safe Strap.
You can find the original thread of DarkLord rom v2.2 here http://forum.xda-developers.com/gal...-tw-note-4-port-5-0-1-darklord-rom-1-t3017604. It is useful to find solutions for any bugs which you may be faced with.
How to install
Flash the DarkLord rom v2.2 from 4.4.2, 4.4.4 or 5.0 rom base with lasted SafeStrap. Both stock or custom based roms are fine. You can find step by step installation as followed.
Download the DarkLord rom v2.2 ROM from the download section below to micro sd card
Reboot to SafeStrap. If you are not on NC2, please follow this guide to know how to boot into SafeStrap http://forum.xda-developers.com/note-3-att/general/att-nj5-safestrap-t2957471
Wipe everything except micro sd card
Install DarkLord rom v2.2 ROM downloaded in step 1
Install the fixes on download section
Install the mods for the rom as you wish from here http://forum.xda-developers.com/showpost.php?p=58541397&postcount=3
Flash supersu from here http://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip UNLESS PHONE NEVER BOOTS UP
Reboot your phone into download mode
Connect your phone into the computer and flash the file "N900A_OC1_ALL_Other_Stock_Partitions.tar.md5" using Odin 3.10's AP slot
Phone will take up to 10' to boot. It depends on how many mods you install with the rom. Just be patient.
Download
The rom
- DarkLord rom v2.2 with modded systemUI as in Screenshots: https://drive.google.com/file/d/0B_fyaS59T7OEOUFWWFUwTFJUd1U/view?usp=sharing or http://www.mediafire.com/download/dexofoveuv2f4m3/Rom_DarkLord_2.2_for_N900A.zip
- DarkLord rom v2.2 with stock systenUI: https://drive.google.com/file/d/0B_fyaS59T7OEazdvcVF4empmaFk/view?usp=sharing
N900A_OC1_ALL_Other_Stock_Partitions.tar.md5 file: https://www.androidfilehost.com/?fid=95916177934545887
Fixes
NFC fix: https://drive.google.com/file/d/0B_fyaS59T7OENzJhNUF6QTBoSTQ/view?usp=sharing
Lock sound: https://drive.google.com/file/d/0B_fyaS59T7OEb1lHVGZCX2Qtb0E/view?usp=sharing
Note4 .video.timer.fix.zip tks @filchi756: https://drive.google.com/file/d/0B_fyaS59T7OEOGpvZkoxRmV0M0U/view?usp=sharing
Memory leak fix: https://drive.google.com/file/d/0B_fyaS59T7OEaFV6SmtFX2JMd0E/view?usp=sharing
Camera fix for dl 2.2
https://mega.co.nz/#!xV8iUCgb!vhefEx3fX9oNRpGIFU4MU9xUTNWP8aEWvOfOWZ6IWk0
Mods
-From the original thread.
Bugs
Proximity sensors does not work properly. Some users have reported it broken but some not. Please share your experience. If you face with this bug, please follow step by step here http://forum.xda-developers.com/showpost.php?p=47248099&postcount=18 to fix it.
You tell me.
All credits and Thanks to:
@carl1961
@Walter.White
@nambavuong
and the others from SamsungViet.
You are NOT Allowed to use ANY PART of @nambavuong's Darklord Rom without HIS PERMISSION
Screen shots
https://drive.google.com/file/d/0B_fyaS59T7OEblpmaEFZeW9CYzQ/view?usp=sharing
https://drive.google.com/file/d/0B_fyaS59T7OEdUtvRW5wd0l4ME0/view?usp=sharing
https://drive.google.com/file/d/0B_fyaS59T7OENzVTUEFXdUN5aTg/view?usp=sharing
https://drive.google.com/file/d/0B_fyaS59T7OEMF9kVDdnYzh1cmc/view?usp=sharing
https://drive.google.com/file/d/0B_fyaS59T7OEYmZRaDg1TGtwcWs/view?usp=sharing
https://drive.google.com/file/d/0B_fyaS59T7OEMjRPQV8wUFJ6elk/view?usp=sharing
ROM REVIEW BY USER
YouTube Video
Good job mate
Why dont u post mod systemui with potato clock its âmzing mod from @lâm1990
looks good .. one question hows the battery on it ?
nambavuong said:
Good job mate
Why dont u post mod systemui with potato clock its âmzing mod from @lâm1990
Click to expand...
Click to collapse
I just pick up some mods which I found them in ur thread and posted what I have been experienced with. All the other mods were recommended to have a look on your thread. [emoji6]
sanguinevn said:
Fixes
NFC fix: https://drive.google.com/file/d/0B_fyaS59T7OENzJhNUF6QTBoSTQ/view?usp=sharing
Lock sound: https://mega.co.nz/#!wN1CEQwR!l54mwT...-81TDa_F3O_2J8
Note4 .video.timer.fix.zip tks @filchi756: https://mega.co.nz/#!YUFnEKJC!l4Cdbs...1ASFHC3VkG0ISY
Memory leak fix: https://drive.google.com/file/d/0B_fyaS59T7OEaFV6SmtFX2JMd0E/view?usp=sharing
Gallery Photos Rotation Fix: FAQ v2.2 from post #1 of the original forum.
Q: Gallery Photos Rotation not work N9005
A: Go to system/csc/feature.xml, find gallery rotation icon, change TRUE to FALSE, then reboot.
Click to expand...
Click to collapse
The Locksound/Note 4 .video.timer.fix, downloads, when I try to download any of them, Mega is asking for a Decryption Key
***Edit, but if I go to the link http://forum.xda-developers.com/showpost.php?p=58541397&postcount=3, I can download it fine
samsung logo stuck
no boot, its been close to 20 min. on clean flash, followed instructions, maybe something is missing
dnp77 said:
no boot, its been close to 20 min. on clean flash, followed instructions, maybe something is missing
Click to expand...
Click to collapse
I just installed, and it booted fine for me
kangi26 said:
I just installed, and it booted fine for me
Click to expand...
Click to collapse
I wonder why it hangs on me, i have tried 3 times the last time I flashed back to nc2, factory reset, installed rom just like you posted, and almost 30 min later still on samsung logo, I'm stumped because I can get 3 international roms that I removed the aroma from to get them to work
xposed doesn't work on this lollipop does it?
Bryanphamx said:
xposed doesn't work on this lollipop does it?
Click to expand...
Click to collapse
Not yet, it'll bootloop
***Edit - The Default APN, is set to Cingular. I set mine to the one here https://apn.gishan.net/settings/751_4_att_apn_settings_for_samsung_galaxy_note_3.php
---------- Post added at 11:23 AM ---------- Previous post was at 11:07 AM ----------
May be just me, but when my install completed, it was REALLY difficult getting the system to update or install any apps from the Playstore. I also noticed that none of the Google apps were installed. Gmail, Drive, Maps, Voice etc. Once I was able to get the Playstore to download, I was able to install them
dnp77 said:
I wonder why it hangs on me, i have tried 3 times the last time I flashed back to nc2, factory reset, installed rom just like you posted, and almost 30 min later still on samsung logo, I'm stumped because I can get 3 international roms that I removed the aroma from to get them to work
Click to expand...
Click to collapse
You must flash supersu as the final step to have the phone boot.
Is it possible to go back to nc2 with Rodin after flashing this
Sent from my LG-V410 using XDA Free mobile app
ryant100 said:
Is it possible to go back to nc2 with Rodin after flashing this
Sent from my LG-V410 using XDA Free mobile app
Click to expand...
Click to collapse
Definitely possible.
No issues so far except for having to setup the proper APN. Other than that.... Running smoothly. Thank you for the porting this over.
sanguinevn said:
You must flash supersu as the final step to have the phone boot.
Click to expand...
Click to collapse
Thanks, I finally got it to boot, that last step fixed it
When I did my install, I stacked the installations in TWRP, ROM first then the Fixes/Mods, then last the SU install package. It installed everything in one shot
kangi26 said:
When I did my install, I stacked the installations in TWRP, ROM first then the Fixes/Mods, then last the SU install package. It installed everything in one shot
Click to expand...
Click to collapse
Just install everything together, rom, fixes and mods or you have to go back and forth with flashing NC2 kernel for every single zip file. So painful.
I'm using these APN settings
Name: ATT LTE
APN: pta
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: http://mmsc.mobile.att.net
Mulitmedia message proxy: proxy.mobile.att.net
Multimedia message port: 80
MCC: 310
MNC: 410
Authentication type: Not Set
APN type:default,admin,fota,mms,supl,hipri,internet
APN protocol :IPv4
APN Roaming Protocol: IPv4
BEARER: Unspecified
Mobile virtual network operator type: none
CLICK MENU button and Save
---------- Post added at 10:09 PM ---------- Previous post was at 10:06 PM ----------
By the way sanguinevn, GREAT looking rom. It's running really well.
Thanks for getting this together and out there for us to play with
Works great! Only issue I have is that SafeStrap no longer shows up in the boot cycle. It still shows as installed, and when uninstalled and reinstalled, nothing changes. BB is installed as well
Do we really need step 9? Or is there another way in SS to do it?
I just want to not use computer / odin
Other working ROMs on AT&T: http://forum.xda-developers.com/showthread.php?t=2938919
Related
[ROM][Nov 09] Navalynt's Optimized Base | RC1 Update 2 | 1.23.1540.1 | T6UL (GSM Only)
Introduction
My intention with this ROM is to create an optimized but stable base that I can use for my daily ROM and from which others can customize for their own ROM releases. I have no intention of spending large swathes of my time with programming and debugging for custom features, many of which can be added through the Xposed Framework. As much as I would like to do that I just don't have the time so please don't take offense to the fact that I have no feature request section and may just plain say no if asked to add something.
Click to expand...
Click to collapse
Please feel free to take this base and build off of it to create your own custom ROMs!
Features
Android 4.3 "Jelly Bean"
HTC Sense 5.5
ROMSoftware Version 1.23.1540.1
Kernel Version 3.4.10
Unsecure Kernel
Deodexed
* Rooted w/ Koush's opensource Superuser
Most HTC logging stuff removed (not sure if I got it all)
wifi.supplicant_scan_interval=180 (battery savings)
ViPER4Android FX
1% Incremental Battery and Charging Animation (thank you Onepagebook!)
Init.d script support
Init.d scripting from baadnewz from his InsertCoin series of ROMs which does the following:
zipalign /data, /system/app, and /system/framework on boot for APKs that have not been zipaligned already
SQLite database vaccum
Fixing permissions on boot
Unmounting the debug filesystem
Click to expand...
Click to collapse
ViPER4Android FX
Version 2.3.1.3
A special shout-out and thank you to ViPER520 and zhuhang for creating such an awesome audio enhancement and giving me permission to include it with my ROM!
Official Website for ViPER4Android FX
XDA-Developer thread
It is HIGHLY RECOMMENDED that if you are not already familiar with ViPER4Android FX that you read through the SETTINGS EXPLAINED and FAQ sections of their website!
Click to expand...
Click to collapse
Apps installed to /data (so you can easily uninstall them):
ES File Explorer
Xposed Framework Installer
Adaway
Google Keyboard (from KitKit)
** Apps installed to /system/app for security reasons:
Cerberus
** KitKat Apps on /system/app:
Updated Google Play Books
Updated Gmail
Updated Hangouts
Updated Play Games
Calculator
Gallery
Camera (in addition to the Sense 5.5 camera, currently FC on PhotoSphere though)
QuickOffice (replaces Polaris)
Google Keep
Desk Clock
* If you want to use SuperSU instead, click HERE to download the zip for version 1.65 and flash it after the ROM
** system/apps stuff can be removed using TitaniumBackup if there is something you don't want
The associated baseband with this ROM is 4T.21.3218.04_10.15.1718.01L. I have a copy of the firmware to flash, however, this will only work if your device is S-OFF. If you have an S-OFF device please PM me and I can provide this for you.
Click to expand...
Click to collapse
**WARNING**
Currently if you unlock the bootloader using HTCDev.com it will disable your fingerprint scanner! You will need to use scotty1223's method HERE to fix the problem.
YOU HAVE BEEN WARNED
Click to expand...
Click to collapse
How to Unlock the Bootloader:
http://forum.xda-developers.com/showthread.php?t=2540004
How to install a Custom Recovery
There are two current options from Flyhalf205
TWRP v2.6.3.0
CWM v6.0.4.4 (touch or classic)
It doesn't really matter which one you use, it's all personal preference. Just download one, reboot to the bootloader (Power + Vol Up), and flash using the command fastboot flash recovery recovery.img
After flashing the recovery you'll want to reboot into the recovery and IMMEDIATELY make a NANDROID BACKUP. There are no RUUs available (that I know of) so if something goes wrong you need a backup you can restore! My personal recommendation is that you backup to an external SD card and also keep a copy of the clockworkmod or twrp backup store on your computer for safe keeping.
Click to expand...
Click to collapse
How to Install the ROM
ROM performs a FULL WIPE (except for internal/external SD storage)
First of all, have you made your NANDROID BACKUP yet?
Copy the ROM to either Internal or External SD (doesn't really matter)
Reboot to recovery and flash the zip file!
FULL ROM DOWNLOAD (RC1 Build 2)
Update from RC1 Build 1 to RC1 Build 2
Hotfix 1 for Build 2 - Flash this if you are having issues with SystemUI force closing after a clean install of RC1 Build 2
Click to expand...
Click to collapse
No source links available for kernel or ROM as they are stock from HTC which has not yet released source.
XDA:DevDB Information
Navalynt Optimized Stock, a ROM for the HTC One Max
Contributors
navalynt
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.4.x
Version Information
Status: No Longer Updated
Current Beta Version: RC1 Update 1
Beta Release Date: 2013-11-09
Created 2013-11-03
Last Updated 2014-02-03
Reserved
Changelog
Initial release as RC1
RC1 Update 2
Added ViPER4Android
Updated SystemUI for 1% battery mod with full 100 charging animations
Removed fstrim on boot (redundant)
Removed Kid Mode (wasn't working right under /data/app)
Removed Titanium Backup (please install from the Play Store if needed)
Updated OP to reflect that Google Keyboard is in /data/app not /system/app
Full ROM now wipes Cache and Dalvik-Cache only (so do a FULL WIPE manually if coming form stock)
Full ROM download updated and an incremental update from Build 1 to Build 2 is also posted
Click to expand...
Click to collapse
Known Issues \ Bugs \ Problems \ Weird S**t
First reports are that this ROM will install on an O2 based handset but the cellular radio does not work unless the ROM is installed with TWRP recovery.
Special Thanks
First to baadnewz for always answering my questions and just being an all around excellent person
Flyhalf205 for making the custom recoveries, without which you would not be able to flash my ROM
Onepagebook for providing the 1% battery mod
dsixda for a most excellent Android Kitchen which allowed me to very quickly customize and deodex
ViPER520 and zhuhang for ViPER4Android FX and permission to include it with my ROM
The Moderators d Staff of XDA-Developers for continued support to the entire community
Donations
Nope, sorry, I don't accept them. Just hitting the thanks button is enough to let me know I'm appreciated.
Reserved
where did you get the base ?
was it preloaded on your phone ?
can i use this rom on a german o2 phone ?
my base is 1.20.207.1
B-Man2005 said:
where did you get the base ?
was it preloaded on your phone ?
can i use this rom on a german o2 phone ?
my base is 1.20.207.1
Click to expand...
Click to collapse
I can't really talk about the base except that the 1540 designation in the build number says it's a developer edition. The only way to know if it's going to work on your phone is to try it out. Just make a nandroid first so if it doesn't work you can just restore your stock ROM.
It should work so long as your phone model is t6ul.
Uh oh
Hoping you can help me Mr developer
Flashed with success, no bootloop, howether,
I've got no SIM or network access and in mobile data tab everything is blacked out. Upon further investigAting I've also lost my imei
---------- Post added at 03:46 AM ---------- Previous post was at 03:10 AM ----------
Flashed my backup back and network is working so all good
I'll still await your input as to how to get around the issue when flashing that rom
This is a new phone so people please back up like op said, it will save you
garyfl said:
Uh oh
Hoping you can help me Mr developer
Flashed with success, no bootloop, howether,
I've got no SIM or network access and in mobile data tab everything is blacked out. Upon further investigAting I've also lost my imei
---------- Post added at 03:46 AM ---------- Previous post was at 03:10 AM ----------
Flashed my backup back and network is working so all good
I'll still await your input as to how to get around the issue when flashing that rom
This is a new phone so people please back up like op said, it will save you
Click to expand...
Click to collapse
What wireless network are you on?
navalynt said:
What wireless network are you on?
Click to expand...
Click to collapse
If you mean phone network then it's giffgaff which runs on the o2 network
UK unlocked 16gb max
garyfl said:
If you mean phone network then it's giffgaff which runs on the o2 network
UK unlocked 16gb max
Click to expand...
Click to collapse
The RIL files within the ROM are for US bands, so from what you are describing it's possible this ROM simply will not work with your carrier.
Edit: Added as a known issue for now. It would be awesome if at least one more person on O2 or an O2 based MVNO would test and verify.
After half day running, the Rom is quite stable, smooth, thanks guy.
Sent from my HTC One max using xda app-developers app
navalynt said:
The RIL files within the ROM are for US bands, so from what you are describing it's possible this ROM simply will not work with your carrier.
Edit: Added as a known issue for now. It would be awesome if at least one more person on O2 or an O2 based MVNO would test and verify.
Click to expand...
Click to collapse
Because my phone is unlocked it wouldn't matter if I used Vodafone, tmobile or 3, the mobile internet settings were completely greyed out and, when I inputted a code into dialer and went to phone settings it was set to wcdma
garyfl said:
Because my phone is unlocked it wouldn't matter if I used Vodafone, tmobile or 3, the mobile internet settings were completely greyed out and, when I inputted a code into dialer and went to phone settings it was set to wcdma
Click to expand...
Click to collapse
Unlocked just means you can put in another carriers SIM card. If your phone wasn't unlocked you would get a popup asking to enter a subsidy code.
The RIL is the radio interface layer. In simplest terms it acts as the go-between for the operating system and the actual cellular radio on the phone. If the ROM has a RIL file that is not compatible with the radio in your phone then cellular data will simply not work.
That is what the problem sounds like to me because restoring your nandoid (going back to stock) fixed the issue. I've tested this ROM on several handsets with several SIM cards and had reports via PM from several users that this ROM is working fine for them so the only thing I can think of an incompatibility between the RIL and cellular radio.
We're still in the infant stages of development for the HTC One Max so there's probably going to be several other pronounced differences between handsets depending on where they are sold.
One thing you could try is pulling these files from your stock ROM and pushing them to the custom ROM:
/system/lib/libhtc_rilhook.so
/system/lib/libril.so
/system/lib/libril-qc-qmi-1.so
/system/lib/libril-qcril-hook-oem.so
The easiest way to do this would be use adb pull on your computer while booted as stock, then replace those files in the ZIP for the custom ROM before transferring it to your phone to flash.
If you try this please post what happens!
could you include beats from the 4.3 rom of the htc one ?
B-Man2005 said:
could you include beats from the 4.3 rom of the htc one ?
Click to expand...
Click to collapse
How about Viper4Android instead. There are A LOT of extra options to customize the audio with that than with Beats (which is really just a equalizer preset). Plus it's still being actively developed and the developers don't mind integration with custom ROMs so long as proper credit is given for the work.
navalynt said:
How about Viper4Android instead. There are A LOT of extra options to customize the audio with that than with Beats (which is really just a equalizer preset). Plus it's still being actively developed and the developers don't mind integration with custom ROMs so long as proper credit is given for the work.
Click to expand...
Click to collapse
oh SOUNDS ^^ promissing
come on ... build it in
thanks
B-Man2005 said:
oh SOUNDS ^^ promissing
come on ... build it in
thanks
Click to expand...
Click to collapse
I'll see if I can put together a supplimental ZIP file tomorrow which adds Viper4Android and update a FAQ section with info on it as well some info on using ROM Cleaner v2.0 to get rid of the Sense elements that are unwanted. I personally get rid of most of it but I don't want to maintain a separate "slim" rom or start maintaining a fancy Aroma installation unless it's absolutely necessary.
Sent from my HTC One using Tapatalk
navalynt said:
I'll see if I can put together a supplimental ZIP file tomorrow which adds Viper4Android and update a FAQ section with info on it as well some info on using ROM Cleaner v2.0 to get rid of the Sense elements that are unwanted. I personally get rid of most of it but I don't want to maintain a separate "slim" rom or start maintaining a fancy Aroma installation unless it's absolutely necessary.
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
i normally delete stuff i dont want manually in titanium ... but thanks could be halpfull for all others
Wow the first rom for the phone.. Wow
Sent from my HTC One X+ using XDA Premium 4 mobile app
pradeepvizz said:
Wow the first rom for the phone.. Wow
Sent from my HTC One X+ using XDA Premium 4 mobile app
Click to expand...
Click to collapse
btw... you can disable your fstrim mod...
its on android by default since 4.3
B-Man2005 said:
btw... you can disable your fstrim mod...
its on android by default since 4.3
Click to expand...
Click to collapse
Oh yeah
This is an port of Sky Note from our sister AT&T Note 2 variant.This ROM is developed by seanzscreams and wouldn't have been possible to be working on our Verizon Note 2 without the hard work of runandhide05 along with several others. Keep in mind that while this runs pretty well there are naturally bugs so be forwarded. I'll try to keep this updated as more bugs are found but so far from my time running this it's pretty smooth with a few exceptions.
I want to give thanks to lacoursiere18, scoobiesnack, runandhide05, WarlockLord (if I forgot to add your name let me know) for the hours of frustrating futile attempts to fix sms and for the logs and ideas that were passed around which eventually led me to the right fix for sms.
AngryManMLS originally started this port so if you like this rom be sure to give him a HUGE thanks for all of the hard work he put into this. He has moved on now to help on other projects and I will be continuing the development on the port.
Original Sky Note ROM thread by seanzscreams with info, pictures, etc.
TouchWiz 4.3 Base Thread by runandhide05
BUGS AND NOTES (UPDATES) :
- Wifi does not work without applying the Wifi Fix that I have detailed below.
- Signal bars not working
-potential rootloss ( some are experiencing root loss while others are not at the moment)
-About Phone - About device force closes. (FIXED BY PATCH - Thanks scoobysnack ! Link below)
Click to expand...
Click to collapse
If there's anything else in terms of bugs etc I'll update this accordingly.
ROM DOWNLOADS
RC9Z-3.9.1 AROMA BUILD
This build is the newest build posted. Do not choose the 62 db mod as it breaks speakerphone. ( Viper audio is my suggested audio mod - choose NEON processor )
DOWNLOAD:
md5: 7031a6d15d541878a13609907bdba6e4
url: http://www.androidfilehost.com/?fid=23269279319195669
Mirror: https://drive.google.com/file/d/0Bwal6uiTcz28emNhQ0dnTFlNZVE/edit?usp=sharing
Mirror 2: https://www.dropbox.com/s/kf7b4w7b6h3mq70/Base_Sky_Note_4.3_R9Z3.9.1_N3.zip
Click to expand...
Click to collapse
Then
Flash the new firmware: mj9 in odin
link
Click to expand...
Click to collapse
B]R9Z-3 Aroma N3 Features[/B] ( Special thanks to fkfmfz for the first aroma installer and teaching me how to AROMA ! )
DOWNLOAD LINK
MD5: f042e4acf0f1dc9037913c0d5a8e7650
Older Builds:
[
B]R9Z-3 Aroma N3 Features[/B] ( Special thanks to fkfmfz for the first aroma installer and teaching me how to AROMA ! )
DOWNLOAD LINK
MD5: f042e4acf0f1dc9037913c0d5a8e7650
Ill do a changelog as soon as I have a chance. I'm working long hours this weekend.
NOTE: this build is themed by fkfmfz I'll be adding a choice for stock theme soon.
R9Z-2 with N3 Features
-- Copy Host --
Google-Drive
Android-File-Host
MD5 checksum : 350bd65acbbf4d0c8897c747eeda8bbd
If you like toggles, after installing open the app named: "MasterToggleMod" to get all toggles activated.
RC9Z with N3 Features (11/26/13)
Copy host
Note: You shouldnt need the Devil2 kernel or the AirCommand addon for this build. But if you don't have wifi try using this kernel.
Also worth mentioning I forgot to change the build # in build prop on this build so it will still show as R9X.
Instructions: Flash rom ---> hold on tight.
RC9x (11/26/13)
Copy host
Instructions:
Clean flash only.
Install rom and upon first boot you should have instant data.
If your wifi doesn't turn on flash this kernel.
If you would like the spen features flash the AirCommand addon.
RC9-1 (11/22/13)
Copy host
RC8-2 (11/14/12)
Android File Host
Dev-Host
RC8 (11/11/13)
Android File Host
Dev-Host
MD5: c7bf06fee5c4b4af19b2bf0ce66de935
AirCommand:
AirCommand Link (Updated Link 11/29/13 ) ******
REMEMBER:
This ROM is still a work in progress. It has however proven to be very solid and quite acceptable for use as a daily driver. Still I'm not responsible if you brick your phone or if your dog catches on fire when you flash it. Its all on you. Enjoy
WIFI FIX Flashable MJ9 Modem/Params
Flash THIS in recovery
scoobysnack and I made this flashable so devs if you want to use this zip in your thread no need to ask , just give us proper credit
Click to expand...
Click to collapse
CHANGE LOG
Changes done on each version by seanzscreams are in his notes.
R9Z-3.9.1
* Updated AROMA
* Reverted Base layer of n3 apps to same base used in R9Z-2
* Slipstreamed newest R9Z Update
* Added more options to AROMA
* Small bug fixes
* Added choice of launchers ( Stock , 5x6, APEX, Nova, KitKat Launcher)
R9Z-3.5-
* Updated Xposed Module Wanam
* Reverted theme to stock
* Updated GMScore
* Fixed Aroma Installer
* Updater-script Edits
* Changed Devil2 kernel installation to Raw image.
* Updated SuperSU to 1.80
* Added xposed module Status bar tint and per app DPI
* VIPER Audio Mod option in aroma
* Some other small edits / tweaks/ changes
R9Z-2 - settings FC fixes - (scoobysnack)
- Integrated some sprint framework via smali swaps
- integrated MasterToggleMod and activator app
Verizon Port Changes
R9Z
- added note 3 features
- small bug fixes
R9x
- Fixes to build prop
- New ril
- Fixed sms
- Fix dialer pad
- Fixed rootloss ( mixed results)
R9-1
- Slipstreamed R9 base
- Prepare rom for note 3 features
R8-2
- Integrated MMS fix by stvn1337. Worked for me but others are reporting its not working.
- Slipstreamed the R8-2 update into the R8-1 ROM release.
- Removed the Lightsaber S-Pen sounds added into R8-1/R8-2.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Other Credits:
Click to expand...
Click to collapse
Thanks to seanzscreams for the ROM and Wifi fix, runandhide05, lacoursiere18, and 1Brite1 for the Verizon data fix, AngryManMLS for the port stvn1337 for confirming the Wifi fix works and for the MMS fix, moosiemooses for contributing to helping with the send SMS as MMS fix, and anyone I forgot to mention for all the hard work that has went into this.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Click to expand...
Click to collapse
MODS & ADDONS:
Signal Bars SUDOFix by scoobysnack
http://www.mediafire.com/download/ratv331x2uesld0/Signalbar_R9Z3.9.1.zip
Note: this fix is purely aesthetic. It does not actually fix the status bars.
Click to expand...
Click to collapse
MMS MODS
This flashable MMS mod includes:
* Split mode in landscape option
* SMS 1000/UNLIMITED RECIPIENT LIMIT
* Some group messaging patches
* Scheduled Messaging
Split-View in portrait is my next mod. Enjoy
Click to expand...
Click to collapse
Alternative System UI
Sprint UI - (Source: locolbd )
LINK
Stock UI with Network Meter
Copy Link
Revert to normal UI - LINK
Click to expand...
Click to collapse
Alternative Launchers
Touchwiz 5x6 Mod
- Link
Return to Stock
Link
Click to expand...
Click to collapse
Weather Mods
Transparent Weather Mod:
- Link
Click to expand...
Click to collapse
Toggle Activators
Download Master of the toggles - HERE:
- Mirror -
Steps: Flash, Profit
One step Mod
Click to expand...
Click to collapse
Volume Mod
(60db) - LINK
(62db) - LINK
Click to expand...
Click to collapse
MasterToggleMod - for any Touchwiz 4.3 Rom
Developers, feel free to use this mod or link to it in your thread just remember to give proper credit for it
This mod should give you 24 toggles, and its so easy even a caveman can do it.
Instructions -
1. Flash zip.
2. Open app "MasterToggleMod"
3. Profit.
---------- LINK ----------
Mirror
MD5- 5ea7baaf0820be8007061b9862edf015
Note: This mod is cooked into roms R9Z-2 + , no need to flash it.
Just to maybe help or just to give a heads up but i have been able to backup and restore this rom multiple times with success. Not sure if the op just needs updated our not on this?!? Thank you for the rom and thank everyone who is helping to make things better...
chiefsfan69 said:
Just to maybe help or just to give a heads up but i have been able to backup and restore this rom multiple times with success. Not sure if the op just needs updated our not on this?!? Thank you for the rom and thank everyone who is helping to make things better...
Click to expand...
Click to collapse
Thanks for letting me know. I'll update the main post.
Sent from my SCH-I605 using Tapatalk 4
Oddly enough I was never able to restore properly. It would just boot loop on me.
AngryManMLS said:
Oddly enough I was never able to restore properly. It would just boot loop on me.
Click to expand...
Click to collapse
I just tried it and it did take forever to get past the boot screen but it finally came up. It is odd that some people are having trouble and others aren't. I may look into the boot.img , I will note that I did my Nandroid with note 3 features installed.
Sent from my SCH-I605 using Tapatalk 4
Just so I can follow... Looking good guys
Sent from my SCH-I605 using Tapatalk 2
stvn1337 said:
I just tried it and it did take forever to get past the boot screen but it finally came up. It is odd that some people are having trouble and others aren't. I may look into the boot.img , I will note that I did my Nandroid with note 3 features installed.
Click to expand...
Click to collapse
Yeah I think I had it sit for close to 10 minutes then gave up. Tried on R8-2 when I had the Note 2.
And for those who are wondering why the change in things here's my post from the previous thread...
AngryManMLS said:
I want to thank everyone who has used this port, everyone who has contributed, and everyone who has posted in this thread. I've been very overwhelmed with all the positivity you have all given on the work that has been done. I can't emphasis on how many hours I've spent on this between testing builds, figuring out things, and what not let alone communicating with several of you privately on fixes. With that being said I'm officially handing the continuation of this ROM port over to stvn1337 as I've recently moved on to the Note 3.
Thank you everyone once again. It's been a great honor to have been able to for a small bit of time find a way to contribute a bit for our Galaxy Note 2 (outside of helping with Vanir ROM as well during the early days of 4.3 AOSP ROMs).
Click to expand...
Click to collapse
AngryManMLS said:
Yeah I think I had it sit for close to 10 minutes then gave up. Tried on R8-2 when I had the Note 2.
And for those who are wondering why the change in things here's my post from the previous thread...
Click to expand...
Click to collapse
Well sad to see you go but thank you for bringing this over and sharing the goods. .. I think the will be good things for this rom
---------- Post added at 06:37 PM ---------- Previous post was at 06:36 PM ----------
stvn1337 said:
I just tried it and it did take forever to get past the boot screen but it finally came up. It is odd that some people are having trouble and others aren't. I may look into the boot.img , I will note that I did my Nandroid with note 3 features installed.
Sent from my SCH-I605 using Tapatalk 4
Click to expand...
Click to collapse
By note 3 features you mean air command? I'm just making sure I am not missing some features lol
chiefsfan69 said:
Well sad to see you go but thank you for bringing this over and sharing the goods. .. I think the will be good things for this rom
---------- Post added at 06:37 PM ---------- Previous post was at 06:36 PM ----------
By note 3 features you mean air command? I'm just making sure I am not missing some features lol
Click to expand...
Click to collapse
Yep , air command.
Sent from my SCH-I605 using Tapatalk 4
AngryManMLS said:
Yeah I think I had it sit for close to 10 minutes then gave up. Tried on R8-2 when I had the Note 2.
And for those who are wondering why the change in things here's my post from the previous thread...
Click to expand...
Click to collapse
Well I have a note 3 also so I guess I'll see you on the other forums also. Thanks again for this rom it got me started on trying to make a custom rom of my own.
I backed up my entire phone... with my usb otg cable.. formatted the int sd card and ext sdcard. Then loaded this rom. Flawless other than no sms.. but sending as mms works. However how can I set it to always send as mms.
Sent from my SCH-I605 using Tapatalk
stvn1337 said:
Yep , air command.
Sent from my SCH-I605 using Tapatalk 4
Click to expand...
Click to collapse
OK cool Thank you, yes I've got air command working here also. Wierd though cause I've been able to backup and restore like 3 or 4 different timHaes to and from this rom. The one thing that I can't get working on this rom is any handwriting? It won't let me pull up the handwriting pad at any time at all?
---------- Post added at 08:00 PM ---------- Previous post was at 07:56 PM ----------
drarkanex said:
I backed up my entire phone... with my usb otg cable.. formated the int sd card and ext sdcard. Then loaded this rom. Flawless other than no sms.. but sending as mms works. However how can I set it to always send as mms.
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
I don't know that you can? But if you do the "add slide" it will convert it everytime. The extra step is just a minor inconvenience until we can figure out the fix
Well people I have some good news and some bad news. I have the dialer working the bad news is I can no longer send MMS. I'm still working on it and hope to have it working in the morning.
scoobysnack said:
Well people I have some good news and some bad news. I have the dialer working the bad news is I can no longer send MMS. I'm still working on it and hope to have it working in the morning.
Click to expand...
Click to collapse
You mean to dial in a call? If you go to *#*#4636#*#* and choose LTE/gsm/CDMA as your preferred network and then toggle airplane mode on and off , both dialer and MMS should work.
Sent from my SCH-I605 using Tapatalk 4
stvn1337 said:
You mean to dial in a call? If you go to *#*#4636#*#* and choose LTE/gsm/CDMA as your preferred network and then toggle airplane mode on and off , both dialer and MMS should work.
Sent from my SCH-I605 using Tapatalk 4
Click to expand...
Click to collapse
That never worked for me. Now if I can just get me MMS back I'm golden
scoobysnack said:
That never worked for me. Now if I can just get me MMS back I'm golden
Click to expand...
Click to collapse
Okay , well let me know when you get it working and I'll either fix a flashable patch or just update the rom if possible, to include your fix
Sent from my SCH-I605 using Tapatalk 4
I didn't get to try them, did the note 3 features work?
Sent from my SCH-I605 using XDA Premium HD app
Do third party SMS apps work?
Sent from my SCH-I605 using Tapatalk
I am pleased to announce @kmokhtar79 has allowed me to share the non-aroma version of his incredible rom for our bootloader-locked note 3.
This rom has a few different install options in aroma, so I made it as simple as possible and added some update.zips so you can flash separately to add exactly what you want.
Rom main page - [ROM]AryaMod V7.2 TW Lollipop Official POF3 | OTA Update [14 August 2015]
Visit the main rom page to thank the dev for this great rom and to view all the features it bring us. I didn't list them all here, so it's a must to visit rom page to see everything...
especially the ROM CONTROL MOD
MOD your System UI, status bar, Phone and In Call UI settings, Framework, Sound and Notification, and much more on the fly.
Notable features of the non-aroma version version
Rooted, Deodexed, Zipaligned, De-Knoxed
Installed Busy Box, su, sqlite
AT&T CSC - thanks to @carl1961
Fully de-bloated (all Samsung bloatware, Google bloatware (List of bloatware removed and link to download bloatware in the download section))
Note 3 Stock Gallery
3 dot menu with Note 4 key mapping
Note 3 Stock Launcher
Call Log (enabled)
MultiWindows - All apps enabled
Camera (Modded)
SystemUI (3Minit Battery and 3Minit Quick Launcher w/ Signal Cluster mod)
Viper for Android Sound Mod
Weather Widget S6
CSC Features
Data Icon type for mobile data: LTE/H+/H/3G/2G/E (none of those ugly AT&T data icons)
Enabled Sub Symbol on Keyboard
Enabled Manual Call Recording
Enabled Call Button in Contact List
Enabled Message Block Menu in Settings
Downloads
ROM - Aryamod v7.4 for N900A
Wifi Fix - http://forum.xda-developers.com/attachment.php?attachmentid=3022901&d=1416382970
Lollipop modem and non-hlos - d-h.st/NrxI
-------------------------------------------------------------------
Older Version Downloads
Rom v7.3 - https://mega.nz/#!GFlHhKYC!w9JxArT01rxUCqe1zYUxDtt4-FJ28LFMsuiDADgPRB8
ROM v7.2 - https://mega.nz/#!HEk0wAqS!4ClgjbtwzEmres_42p_uBRrWZmXdMsalrZbOdTN9hp4
Only use these mods on v7.2... they will not work on v7.3
Note 3 Hardkey w/o 3 dot menu - https://mega.nz/#!zd1i0YAI!KZ02DUl_5YeZ6SMqFY3HPQy6L61LDRfod-FVLUA_ZCU
System UI with 3 minit battery (no quicklaunch) - https://mega.nz/#!bMFD3QhS!aZGmgUlvt9rgvNYR-7xv6MGPdgnhS48U3DNvMk2tBS4
Stock System UI without 3 minit battery - https://mega.nz/#!WF9m2DpZ!TL-shix3UKE5VfM2fyn1T47lpa4FbTiEC0xlviPp3es
DARK MATERIAL THEME (personal favorite thanks @ikrom) - http://forum.xda-developers.com/showpost.php?p=62433899&postcount=12163
Bloatware - https://mega.nz/#!ydNw2IzD!Sa2aUHG-6dpk3Jmf4XCNpfyfGAmFtTy7XG8RT4Cso0Y
GOOGLE BLOAT
-------------------------------
Books
Chrome
Gmail
Google_Maps
Google_Music
Google_PlayGames
Google_Plus
Google_Search
Hangouts
YouTube
Google_Drive
Google_Camera
Videos
SAMSUNG BLOAT
------------------------------------
Bloomberg
ChatON
ColorBlind
Dropbox
Evernote
Flipboard
GroupPlay
InteractiveTutorial
Kies
LiveWallpapers
MobilePrint
MusicLiveShare
PhotoRetouching
PolarisViewer
amsungApps
SamsungLink
SamsungWatchON
Samsung_Fonts
SHealth
SketchBookStub
SecKidsModeInstaller
Story_Album
STranslator
SVoice
Talkback
TripAdvisor
VideoEditor
VoiceRecorder
YahooStocks
Custom 300 Fonts
WIDGETS
---------------------------------------------------
DigitalClock
DualClockDigital
EasyFavoritesContactsWidget
Samsung_Apps_Widget
SamsungWidget_ActiveApplication
SPlannerAppWidget
Xposed - Click this link and download the xposed-v65-sdk21-arm-arter97-V5-krait.zip version
Now click this link for XposedInstaller_3.0_alpha4.apk
Flash the v5-krait.zip in recovery and just install the XposedInstaller_3.0_alpha4.apk like a normal application
The dev has requested that all xposed talk remain out of his thread and it isn't to be discussed. This is because the rom uses heavy on the fly themeing options that might not be compatible.
I personally do use xposed on this rom, just not theme modules. Works great with modules such as Greenify, Powernap, Amplify, etc.
Installation
1. Download ROM and/or extra mods to sd card
2. (If already on Lollipop, flash NC2 kernel via NC2 Flashed by benwaffle or using Odin) (If on KitKat, then reboot to safestrap recovery)
3. Advance wipe everything except Micro SD card x 3 times
4. Flash ROM
5a. Flash Wifi Fix
5b. Flash modem (ONLY needed if you are coming from KitKat/NC2))
6. Flash any other mods if you downloaded them
7. Flash OC1 Lollipop kernel
8. Reboot system
Screenshots
ROM SCREENSHOTS - CLICK HERE
I just installed and wifi doesn't work, is there a fix?
Thanks @swapavi for your hardwork. Downloading now...lets see maybe wifi works for me...
Do you have to flash the oc1 kernel if you're on nc2 still?
I found a solution for the wifi problem if anyone else has it just need to flash the file provided here http://forum.xda-developers.com/showpost.php?p=56717531&postcount=1 cheers
Sorry I forgot about the WiFi fix... I've been on this rom for a while now so I didn't even remember I need it lol
Added to OP.. thanks @ramirnuel
swapavi said:
Sorry I forgot about the WiFi fix... I've been on this rom for a while now so I didn't even remember I need it lol
Added to OP.. thanks @ramirnuel
Click to expand...
Click to collapse
you're welcome bro we are here to help each other
OMG_VTEC said:
Do you have to flash the oc1 kernel if you're on nc2 still?
Click to expand...
Click to collapse
Yes you do because this is a lollipop rom and you need the lollipop kernel to boot your phone up. You might need the lollipop modem if your signal isn't strong enough but it should be..
What's the memory usage at after you boot, and what's it at after a day of usage?
Namelesswonder said:
What's the memory usage at after you boot, and what's it at after a day of usage?
Click to expand...
Click to collapse
Not sure about right after I boot... but this is a after 61 hours of up time....
Note: the memory info in the notification panel is not correct... go by my screenshot of the task manager
working good so far without any issues..great rom.. thanks
---------- Post added at 12:58 PM ---------- Previous post was at 12:26 PM ----------
after installing DARK MATERIAL THEME...phone won't boot up...stuck at google logo..
[ROM] [5.0] Aryamod v7.2_bykmokhtar79 for N900A
babbar559 said:
working good so far without any issues..great rom.. thanks
---------- Post added at 12:58 PM ---------- Previous post was at 12:26 PM ----------
after installing DARK MATERIAL THEME...phone won't boot up...stuck at google logo..
Click to expand...
Click to collapse
In the process of downloading the dark theme, but it looks like an Aroma installer. If so, you'd have to install via FlashFire
EDIT: Nvm I guess. I saw him mention Aroma settings and assumed.
We all know what they say about people that assume, of course...
Is there a way to boot into Safestrap after installing?
KTownGT said:
In the process of downloading the dark theme, but it looks like an Aroma installer. If so, you'd have to install via FlashFire
Click to expand...
Click to collapse
Dark theme isn't aroma... just flash and you're good to go.
System UI
I get the error message "Unfortunately, System UI has stopped" after installation and boot to the setup screen...
Loving the rom . Does anyone know how to fix nfc?
Hey, great rom. Love the removal of all the bloat. One problem for me, though. I like to use live wallpapers. Can you provide the necessary files to get my live wallpapers up running, without having to flash the full "Bloatware" zip you provided? Thanks.
nuvision said:
I get the error message "Unfortunately, System UI has stopped" after installation and boot to the setup screen...
Click to expand...
Click to collapse
Did you do a full wipe? Without restoring any data after the flash?
fireman1937 said:
Loving the rom . Does anyone know how to fix nfc?
Click to expand...
Click to collapse
I have several NFC fix files laying around.. at work atm but I'll check em out when I get home.
PantherCat said:
Hey, great rom. Love the removal of all the bloat. One problem for me, though. I like to use live wallpapers. Can you provide the necessary files to get my live wallpapers up running, without having to flash the full "Bloatware" zip you provided? Thanks.
Click to expand...
Click to collapse
Yep np, I'll get that later on today.
babbar559 said:
working good so far without any issues..great rom.. thanks
---------- Post added at 12:58 PM ---------- Previous post was at 12:26 PM ----------
after installing DARK MATERIAL THEME...phone won't boot up...stuck at google logo..
Click to expand...
Click to collapse
Dirty flash the rom again and flash dark theme right after that
After flashing the rom I can no longer access safestrap. When rebooting I don't have the option to load recovery nor is there an option once the phone has booted up (via the power menu or other). Can anyone help me with this? Am I missing something? Any insight would be appreciated.
Disclaimer. I am not responsible for anything that happends to you, your phone or dog. Im not responsible for anything that may happen if you flash this rom on your device. Flash at your own risk. First time me modding anything in life. You take full responsibility for your actions and consequences.
ROM DATE 11-12-2016 ANDROID 6.0.1 V4
UPDATED ROM 1/22/17 to V5
1. Darklord N5 modded with N7 apps. July Security patch. Sprint VVM Working and no FC on hangup!!! This rom is Universal for most carriers
2. Xposed included but not system wide must install files needed thru twrp I will provide the file.
3. Latest Viper included with adaway and some updated N7 apps.
4. Debloated as much as i could.
5. UBER Battery life
6. Latest VVM For Sprint
7. Super Smooth no lag
8. 6x5 Dock with 5x5 page
9. Hotspot
10. Themes
DOES NOT INCLUDE A KERNEL!!!!!
MUST FLASH USING TWRP 2.8.7.0!!!!
I RECOMMEND DARKLORD UX 2.0 hltespr its super smooth i get 15 hours Battery life without powersaving!!! about 40 on max settings 33 on mid. With white color theme. Black out device get up to 85 hours on max power save and 25 hr without power save.
Id like to thank the Darklord for his hard work and for letting me use his rom as a base.
Thank Audax for his kernel cleaner
Thank Buzbee for his Apns MNVO
I personally worked on this for months as you see the base is from july and that was the base i took.
I also included a MM Fix for SD card as some apps have an issue writing to SD you must install xposed to use it.
There will not be any updates for this rom unless i get some help please do not use my work without asking first.
I need someone who can help update the security patches as well as some of the base apps.
MUST USE LATEST BASEBAND AND FIRMWARE FROM SPRINT!!! which is PH1 if not upgrade to it reroot and then flash this rom.
Rom Video Installation Link
https://youtu.be/A3AbQHEjkRo
1. Watch Video (if downloaded old rom before V5)
1A. If downloaded V5 install as any other ROM use XAS or SPR CSC in aroma, reboot into recovery, clean kernel with cleaner, then install kernel of choice, reboot to system, wait 15 min. Profit.
2. Activate VM [email protected]
3. Give thanks or donate thanks for any donations
4. Enjoy
Note. Regular Message app wont work fully please use Textra or another alternate to the base one as it can send text and receive but cannot send Multimedia text. I recommend Textra Its beautiful and it automatically picks up Sprint APN Settings
PH1 Download
http://forum.xda-developers.com/note-3-sprint/general/rom-odin-ph1-update-t3463178
Rom Link below
New Link 1/22/2017 ALL In One Rolled UP TY @taijidude For This V5!
https://mega.nz/#!kYgzxZCT!YjDcaNfK4ec-1PNs3glWFU4NHFrNOxdaGVSfiBXjbXA
V5 Changelog
Here are the changes included:
- updated apns-conf.xml for both SPR and XAS so the network connects
- updated build.prop to include some Sprint specific configurations
Added
FlipboardBriefing (I like this app and use it daily... saw where others made comment so added it)
VVM
Miscellaneous Downloads Section
Kernel Cleaner
https://mega.nz/#!UMRFia6T!oU0uPaaTEdenkICyEoZZApfHa1-posmfzZFLL-0v8Ms
MVNO APNS
https://mega.nz/#!oEAjXLhI!bI1-MVMDOCpELXrRCMmLJ7O_ApK0kCTz-yfKLeCpqA8
Sprint VVM Version 8.0
https://mega.nz/#!RAgymRZA!e6kXAcwuL_q5der64E07Z6XPBRfgtky0El9Xr1jPzlE
3minit flashable by @Sczar Thank you so much for your help (use gravity box to get rid of the regular battery icon) also clear cache after installing the mod
https://mega.nz/#!0EVg0Cjb!gI_xodtl_MwfUKfkA5f89XIdqIe4W_8Rz7OhSmSVJQI
*Download Latest Adreno Drivers for 30% Increase in graphics here*
https://forum.xda-developers.com/galaxy-note-3/orig-development/adreno-330-drivers-note-3-t3523915
where do i get PH1 firmware
quietmode01 said:
where do i get PH1 firmware
Click to expand...
Click to collapse
http://forum.xda-developers.com/note-3-sprint/general/rom-odin-ph1-update-t3463178
HERE =)
Does SMS/MMS and data work with this? Are there any quirks like some of the other ROMs, like if the other person hangs up first you lose data? Or is this like a Sprint based port similar to Sac's, where all native things work including updating PRL/Profile etc? If so that would be AWESOME.
Thank you. I've been waiting for something new for my note 3. Will try when off work
Sent from my SM-N900P using XDA-Developers mobile app
12gage said:
Does SMS/MMS and data work with this? Are there any quirks like some of the other ROMs, like if the other person hangs up first you lose data? Or is this like a Sprint based port similar to Sac's, where all native things work including updating PRL/Profile etc? If so that would be AWESOME.
Click to expand...
Click to collapse
Please read the original post. This is not like sacs. I dont have that kind of time to have that correctly fixed but its in there I just dont know how to activate those feature (PRL, Profile Update). SMS works but again not fully for Multimedia. Use alternate app for text like Textra if you want full capabilities. I did reach out to Sac23 for advice but he stated and i quote "Its not as simple as copy and paste" "Plus i no longer have a note 3 with Sprint to be able to test" Yet if any other developer has the time to help me fix it id gladly welcome it. It does not have FC on hangup
quietmode01 said:
Thank you. I've been waiting for something new for my note 3. Will try when off work
Sent from my SM-N900P using XDA-Developers mobile app
Click to expand...
Click to collapse
NP. Let me know what you think.
Thanks for your work on this ROM, i myself can not get it to work tried 3 times with both kernels and it just hangs on the Samsung splash. truly a bummer was really excited to try out something diffrent.
binaryimage said:
Thanks for your work on this ROM, i myself can not get it to work tried 3 times with both kernels and it just hangs on the Samsung splash. truly a bummer was really excited to try out something diffrent.[/QUOTE
it takes about 15-20 minutes to boot did you flash specifically as i instructed? I just reflashed it myself and it worked. Ill try and post a video of going thru the flashing process. Sorry it didnt work out for you
Click to expand...
Click to collapse
What recovery did you use to install this rom?
When I tried installing it, it sat for well over 20 minutes on the Samsung Splash Screen.
TWRP 2.8.7.0
I have made a video of the installation boot up time was 9 minutes after the install of rom. ill post the video tomorrow after i edit it it has my phone number and i need to block it
Im on 2.8.7.0 twrp, ph1 firmware, ill try again. Dont understand, maybe its just taking longer then most. So it is supposed to sit on the samsung splash screen?
binaryimage said:
Im on 2.8.7.0 twrp, ph1 firmware, ill try again. Dont understand, maybe its just taking longer then most. So it is supposed to sit on the samsung splash screen?
Click to expand...
Click to collapse
Sits on Samsung for about 10 min on mine first boot. Not when it says Samsung galaxy note 3 it just says Samsung by itself
Mine might just take a little longer then normal ill give it another shot.
binaryimage said:
Mine might just take a little longer then normal ill give it another shot.
Click to expand...
Click to collapse
I added the video on the OP. Enjoy
Thanks for posting the video. I followed along exactly, and my phone gets stuck at the "Samsung Galaxy Note 3" screen. It never advances to the plain Samsung screen.
spaceshipunicorn said:
Thanks for posting the video. I followed along exactly, and my phone gets stuck at the "Samsung Galaxy Note 3" screen. It never advances to the plain Samsung screen.
Click to expand...
Click to collapse
Maybe its a bad upload. I will upload v4 and after I make sure it work it will be uploaded tonight sorry for the inconvience
spaceshipunicorn said:
Thanks for posting the video. I followed along exactly, and my phone gets stuck at the "Samsung Galaxy Note 3" screen. It never advances to the plain Samsung screen.
Click to expand...
Click to collapse
Same thing happened to me using Darklord kernel, tried the other kernel and would get to samsung screen and just sit, i left it alone for 40 min. Had to pull battery to shut it off, glad to know its not just me. It was driving me nuts especially after watching the video and knew i did it right.
Guys i figured out it was bad coding in the build prop i have fixed and retested on 2 different note 3s its working now im re-uploading the rom. I apologize for all the inconvenience @spaceshipunicorn @binaryimage
[ROM]DarkLord Reborn
Disclaimer: I am not responsible for anything that happens to you, your phone, your children, or your long lost uncle Louie. Flash at your own risk. You bought it, you broke it.
SPRINT ROM UPDATE: 16 May 2017
Original ROM DATE: 29 Mar 2017
Darklord is back!
The masterpeice, this outstanding S7E MM port is being reborn with the power of NXTeam. This rom was ported from [bold][ROM][NXTeam][6.0.1][S7E Port][29.Mar.2017] DarkLord Reborn[/bold]. It has been updated to support SPRINT data and works upon boot. No need to flash MVNO buzbee, replace apns, or replace eri.xml. Upon initial boot, you need to enable mobile data toggle to use data.
The stock MMS/SMS app works. There is no need to use a third party app like textra to send mms.
I have tested this with LSS3.8 and DarkLord UX kernel. LSS 3.8 is included with rom.
Galaxy S7 Edge MM Port ROM
Credit
=========================================
@@Patrick.H - his rom port to modify data to work out of the box.
NXTeam Staff @karkasss
NXTeam Staff @gugu0das (E330, E470, N900K/S, N9005 Kernel) @qwerty123258/세나
@darkera13 (porting roms, please thank him in his original thread)
@Kamy (AryaMOD / GraceUX Pack / Sound Control MOD) @lss1977 (lsskernel) @Sczar (Fixed for Verizon/Sprint device)
@Chainfire(SuperSU app)
@amarullz (aroma installer)
@topjohnwu (Magisk)
@daxgirl & @Wuby986 for sharing a wonderful project; ROM Control App
@tdunham, @rompnit,
@xperiacle,
@asc1977 , @DaOldMan (AOD brightness control)
@Ticklefish for his cool tool @not-i for his helps and being a great developer inspiring with his Sweet Rom
@gharrington for 3Minit battery mod
@venkat kamesh
@thereassaad @lijianjunyonghu (Norma ROM Dev)
@txr33
@jovy23 @tamirda
@ikrom
@zhuhang
@worstenbrood
@ambasadii
@Eleo for his amazing contribution, help and support
And everybody using this ROM Please let me know if I am missing your name on credit section.
=========================================
Changelog
=========================================
=========================================
release V.4 - Sprint [16.May.2017] - Mid3vil
** Fixed data to work on Sprint
** Updated Carrier notification to correctly identify Sprint
Previous Changelog
=========================================
release Ver.4 [29.Mar.2017]
** Fixed Speaker phone issue
(Build.prop edited by Mike B.)
** Kernel updated (Release-2 29.Mar)
(E330, i9506, E470, N900K/S, N9005)
** Fixed Galaxy J system files (Wifi..)
** Fixed Olleh-wifi/T-wifi for Korea
release Ver.3.1 [23.Mar.2017]
1.Added Sprint variant (Thanks @Sczar)
- but Mobile data is not working yet
release Ver.3 [22.Mar.2017]
1.Fixed the thumbnail of default theme on ThemeCenter
(Thanks @Subin khan)
2.Restore Statusbar color to grey when PowerSavingMode enabled
3.Fixed SystemUI FC when choose swipe lock menu again(AryaMOD)
4.Fixed network manual searching
5.Kernel changed (gugu0das) - Incall delay is not fixed yet
6.Fixed Manage app data FC
release Ver.2 [12.Mar.2017] KST Time - UTC+09
■ Thanks @Sczar
1.Finally working on Verizon/Sprint device
2.Fixed (Roaming Indicator Off) to Show Verizon wireless. (Need to flash the separated zip, provided by Sczar. Download link will be updated)
■ Thanks @qwerty123258/세나
1.AOD Touch
(Only for Music contol)
2.Bluelight Filter
(Only enable from setting-display)
3.Charging time notification
■ Others
1.Nougat icons for SystemUI-Colored
(Stock/AryaMOD)
2.Replaced new Calculator
3.Fixed Calendar on EdgeScreen
release Ver.1 [03.Mar.2017] KST Time - UTC+09
1.NXTeam Aroma Installer
- Stock / AryaMOD
- Camera (N4 / S7 / N7)
- Multi-CSC
- GPS locale
- User features
- Debloat apps
- Root (SuperSU / Magisk / NoRoot)
- XPOSED
- SoundMOD
2.Fixed NFC
3.Fixed AOD flickering
4.AOD brightness control by manual
5.Fixed 3dot menu lag for 3rd party apps
6.Fixed all brightness bug
7.Latest system apps
=========================================
Support Device
=========================================
>> Samsung Galaxy Note3 Sprint
=========================================
Not working
=========================================
- Sidesync (black screen but presentation mode is working)
- VoLTE
- Sview camera FC
- Video call is not working on some variants
=========================================
Installation
=========================================
Root permission and Custom recovery
Galaxy Note3 : [PhilZ Touch / CWM 6.0.5.0 / TWRP 2.8.7.0]
Make sure your phone is fully charged to 100%.*
READ ME
1. Select XAS for CSC. I have not patched SPR CSC.
2. While data is 100% operational out of the box, mobile data is turned off. You will need to turn on mobile data toggle! Please do not post saying your data doesn't work, until you have enabled the mobile data toggle.
=========================================
Download
=========================================
ROM - Release V4
Android FileHost
MD5: 32658a8079c28696d203628f6560c0dc
=========================================
GPS FIX
=========================================
GPS Fix by @tajidude
Original File URL
gps-fix-sprint.zip[/QUOTE]
Backup File URL
Download GPS FIX
MOD
=========================================
Grace UX Pack
Show thread
Note7 SystemUI / Settings Pack
Show Thread
S8 Icon Pack
Show thread
S8 TouchWizHome
Download
Original post
=========================================
Source Code
Lss Kernel Thread
Lss kernel GitHub
ROM Control Source
-------------------------------
gugu0das BLOG
gugu0das kernel GitHub
Original Thread Link
DarkLord pek Thread
https://samsungvn.com/threads/6-0-1-english-n900x-snapdragon-darklord-s7-edge-full-port.16761/
-----------------------------------------------------------------------
Aryamod Thread
https://forum.xda-developers.com/ga...t/rom-aryamod-v1-3-tw-lollipop-5-1-1-t3326976
[NXTeam][6.0.1][S7E Port][29.Mar.2017] DarkLord Reborn
https://forum.xda-developers.com/galaxy-note-3/development/nxteam-darklord-s7e-reborn-t3565866
Version Information
Status: Stable
Created 2017-05-16
Last Updated 2017-05-16[/QUOTE]
Screenshots will be uploaded at a later time - I'm in a hurry to get home to my wife
If you need screenshots right now go check out the origional thread that this rom was pulled from.
Have fun flashing another Note 3 rom
Mid3vil One
Thank you so much
Thank you for keeping this phone live with this amazing updated ROM
Any of the mods that require a replacement of the framework-res.apk will break the Carrier information. Basically the updated framework-res.apk doesn't contain the correct ERI.XML to show "SPRINT"
as such, if you use a mod that breaks it.. just flash one of the MVNOBuzbee found @ https://mega.nz/#!oEAjXLhI!bI1-MVMDO...CTz-yfKLeCpqA8
I may look at repacking those apk's with the correct information if anyone is interested.
The voicemail is not included?
luckymichael said:
The voicemail is not included?
Click to expand...
Click to collapse
It is not.. I could add it but didn't right now because I use google voice
The APN setting is disable (grey). How to edit APN settings?
luckymichael said:
The APN setting is disable (grey). How to edit APN settings?
Click to expand...
Click to collapse
If you are on sprint, you shouldn't need to edit the APN settings. What CSC Did you select?
Thanks @mid3vil. I am using it on Tello, a MVNO of Sprint. So I need to edit APN setting for mms and LTE.
mid3vil said:
If you are on sprint, you shouldn't need to edit the APN settings. What CSC Did you select?
Click to expand...
Click to collapse
Does this pass Safetynet if you hide root with magisk? Can you disable this xposed framework (in the app itself) to pass safetynet or do you have to uninstall? If you have to uninstall, does it come with the uninstall file and will it break this mod?
AzzidReign said:
Does this pass Safetynet if you hide root with magisk? Can you disable this xposed framework (in the app itself) to pass safetynet or do you have to uninstall? If you have to uninstall, does it come with the uninstall file and will it break this mod?
Click to expand...
Click to collapse
Never tried any of the proposed ideas. Best solution would be to try it for yourself and see what the outcome is.
mid3vil said:
Never tried any of the proposed ideas. Best solution would be to try it for yourself and see what the outcome is.
Click to expand...
Click to collapse
Does this come with the uninstall file for xposed? Will it break the rom? If it doesn't come with the rom, can you link me to the xposed version you used?
Great rom. Just what I needed for a daily driver. Everything works. Thank you for your hard work.
luckymichael said:
Thanks @mid3vil. I am using it on Tello, a MVNO of Sprint. So I need to edit APN setting for mms and LTE.
Click to expand...
Click to collapse
You need to select XAS under the CSC selection during install if you want to edit the APNs. Selecting SPR does not allow for editing of APNs.
---------- Post added at 07:41 PM ---------- Previous post was at 07:35 PM ----------
AzzidReign said:
Does this come with the uninstall file for xposed? Will it break the rom? If it doesn't come with the rom, can you link me to the xposed version you used?
Click to expand...
Click to collapse
Unless this ROM installs differently than the unmodified v4, you should have the option to not install exposed or uninstall exposed with an update reinstall... these options are in the Aroma installer.
---------- Post added at 08:11 PM ---------- Previous post was at 07:41 PM ----------
Hey Mid3vil...
Thanks for exposing this ROM to the N3 Sprint section. I just found this thread but have been using this ROM since the beginning of March when V1 was released. This is by far the best MM ROM for the Sprint Note 3, and with the N7 SystemUI it provides a near Note 7 experience.
I assisted sczar with some information and feedback in making V2 work with Sprint, the final changes went into V4. The APNs should have been fine and did not need to be altered to get V4 to work. There are still some minor irritations that maybe can be addressed, but some of them may be just my phone acting up.
You already addressed one of them by tweaking the the framework-res.apk to update the eri.xml to show Sprint. I have been manually applying the fix after install by copying the eri.xml file to /data.
Another is the gps.conf file is wrong for Sprint (at least me and some others) and does not allow the gps to locate properly. I thought it was just me and ended up extracting the gps.conf file from the stock PL1 ROM, but then ended up making it into a flashable zip when someone else had the same issue and was looking for a fix.
Lately I have been getting an issue with the wifi disconnecting when screen is off and then trying to connect when screen is turned on... sometime is cannot reconnect and I have to turn off the phone and reboot it in order to get wifi to connect (just rebooting does not seem to work??). I have researched this issue on the internet and have tried every solution I could find... nothing seems to permanently fix it. Went back to stock for a few days and it would also disconnect when screen is off but would always reconnect again. Since this is a new issue I picked up in mid April, it might be a hardware glitch since my phone is now just over 4 years old.
Have been using the latest Phantom kernel with this ROM and it is fantastic... great battery life and performance.
Again, thanks for sharing this ROM with the Sprint community!
mid3vil said:
Any of the mods that require a replacement of the framework-res.apk will break the Carrier information. Basically the updated framework-res.apk doesn't contain the correct ERI.XML to show "SPRINT"
as such, if you use a mod that breaks it.. just flash one of the MVNOBuzbee found @ https://mega.nz/#!oEAjXLhI!bI1-MVMDO...CTz-yfKLeCpqA8
I may look at repacking those apk's with the correct information if anyone is interested.
Click to expand...
Click to collapse
taijidude said:
You need to select XAS under the CSC selection during install if you want to edit the APNs. Selecting SPR does not allow for editing of APNs.
---------- Post added at 07:41 PM ---------- Previous post was at 07:35 PM ----------
Unless this ROM installs differently than the unmodified v4, you should have the option to not install exposed or uninstall exposed with an update reinstall... these options are in the Aroma installer.
---------- Post added at 08:11 PM ---------- Previous post was at 07:41 PM ----------
Hey Mid3vil...
Thanks for exposing this ROM to the N3 Sprint section. I just found this thread but have been using this ROM since the beginning of March when V1 was released. This is by far the best MM ROM for the Sprint Note 3, and with the N7 SystemUI it provides a near Note 7 experience.
I assisted sczar with some information and feedback in making V2 work with Sprint, the final changes went into V4. The APNs should have been fine and did not need to be altered to get V4 to work. There are still some minor irritations that maybe can be addressed, but some of them may be just my phone acting up.
You already addressed one of them by tweaking the the framework-res.apk to update the eri.xml to show Sprint. I have been manually applying the fix after install by copying the eri.xml file to /data.
Another is the gps.conf file is wrong for Sprint (at least me and some others) and does not allow the gps to locate properly. I thought it was just me and ended up extracting the gps.conf file from the stock PL1 ROM, but then ended up making it into a flashable zip when someone else had the same issue and was looking for a fix.
Lately I have been getting an issue with the wifi disconnecting when screen is off and then trying to connect when screen is turned on... sometime is cannot reconnect and I have to turn off the phone and reboot it in order to get wifi to connect (just rebooting does not seem to work??). I have researched this issue on the internet and have tried every solution I could find... nothing seems to permanently fix it. Went back to stock for a few days and it would also disconnect when screen is off but would always reconnect again. Since this is a new issue I picked up in mid April, it might be a hardware glitch since my phone is now just over 4 years old.
Have been using the latest Phantom kernel with this ROM and it is fantastic... great battery life and performance.
Again, thanks for sharing this ROM with the Sprint community!
Click to expand...
Click to collapse
Thank you for the response. Sadly I couldn't get the V4 APN's to work correctly for me, so just replaced them. If I remember correctly, I made a few modifications to the build.prop (but i was messing around with a couple of roms at the time, so I cant guarantee that). As for a GPS lock, I have not had this issue, it has been working like a champ for me with the config from the V4.
I didn't modify the installer. I started to debloat the extra CSC's and options that dont pertain to Sprint, but wanted to keep as close to the initial release as possible.
I'm currently using Darklord Kernel (3.4.0-DarkLord-Kernel-Marshmallow-hlte-spr-V1.9)
This is really a nice ROM but I noticed one of the features that I love about my Sprint Note 3 stop working at some point. It's the ability to talk on the phone and surf the internet at the same time without Wi-Fi needed, total data usage. So I switch back to my previous ROM and noticed I was not receiving phone calls and lost the ability to call out yet data was still working. So I switch back to the stock ROM and did the PRL and profile update and still no ability to make or receive phone calls. So I called Sprint and they gave me a special telephone number of tech support to call. They notice my phone somehow
switched Networks They even asked me if I done something recently like trying to reset my phone or switching Networks providers. The tech support person said to give him a minute and said the phase " they will put my phone back in line" so It will work properly. They asked me to turn off my phone and wait 2 minutes and turn it back on and my calling service was restored. I'm not sure how that happened other than when I tried to use the voicemail by pressing one I heard a Verizon recording but then went into settings and put my own number in it for voicemail. So I'm back on the stock for now but I really miss the nice features. Keep up the good work.
I was not having any issues with GPS lock issues. I saw a post 2 years ago about taking the back cover off of the Note 3 and removing the black cover and you will see a tab for the GPS that may have popped off if the phone was dropped. I secured it with a piece of tape and GPS has been spot-on ever since going on 2 years now. I hope this help with other Note 3 users
Does Samsung Pay work? Mine doesn't and I am not sure what the problem is. It hangs on the 'Samsung Rewards' windows.
I have read where Samsung Pay does not work with a rooted phone... but there may be some workarounds using Magisk systemless interface and the AutoMagisk app to toggle off root... I have not tried this though as I do not use Samsung Pay.
luckymichael said:
Does Samsung Pay work? Mine doesn't and I am not sure what the problem is. It hangs on the 'Samsung Rewards' windows.
Click to expand...
Click to collapse
---------- Post added at 02:18 PM ---------- Previous post was at 02:09 PM ----------
Thanks for the idea of using DL kernel... I haven't used it for some time since experimenting with tweakable kernels (LSS, shinto, phantom)... have been using the DL 2.0 kernel for over a week and have not had any wifi issues... went back to try the new LSS and phantom releases and wifi issues returned with both... interesting that DL kernel does not have this issue but the other kernels do... also interesting that I did not have any wifi issues with the other kernels for over 6 months, then began having issues during the beginning of May... I still suspect a hardware issue, but the DL kernel seems to be more forgiving than the others.
Is there any reason you are using v1.9 instead of v2.0?
luckymichael said:
Does Samsung Pay work? Mine doesn't and I am not sure what the problem is. It hangs on the 'Samsung Rewards' windows.
Click to expand...
Click to collapse
mid3vil said:
Thank you for the response. Sadly I couldn't get the V4 APN's to work correctly for me, so just replaced them. If I remember correctly, I made a few modifications to the build.prop (but i was messing around with a couple of roms at the time, so I cant guarantee that). As for a GPS lock, I have not had this issue, it has been working like a champ for me with the config from the V4.
I didn't modify the installer. I started to debloat the extra CSC's and options that dont pertain to Sprint, but wanted to keep as close to the initial release as possible.
I'm currently using Darklord Kernel (3.4.0-DarkLord-Kernel-Marshmallow-hlte-spr-V1.9)
Click to expand...
Click to collapse
taijidude said:
Is there any reason you are using v1.9 instead of v2.0?
Click to expand...
Click to collapse
Yes there is a very good reason I don't use 2.0. I've been too lazy to grab a copy and test it out
Do you still have that flash able zip for gps? I constantly have issues w it the gps not getting a complete lock and it is off by a block or 2 so I am getting delayed directions or constant route changes.
taijidude said:
You need to select XAS under the CSC selection during install if you want to edit the APNs. Selecting SPR does not allow for editing of APNs.
---------- Post added at 07:41 PM ---------- Previous post was at 07:35 PM ----------
Unless this ROM installs differently than the unmodified v4, you should have the option to not install exposed or uninstall exposed with an update reinstall... these options are in the Aroma installer.
---------- Post added at 08:11 PM ---------- Previous post was at 07:41 PM ----------
Hey Mid3vil...
Thanks for exposing this ROM to the N3 Sprint section. I just found this thread but have been using this ROM since the beginning of March when V1 was released. This is by far the best MM ROM for the Sprint Note 3, and with the N7 SystemUI it provides a near Note 7 experience.
I assisted sczar with some information and feedback in making V2 work with Sprint, the final changes went into V4. The APNs should have been fine and did not need to be altered to get V4 to work. There are still some minor irritations that maybe can be addressed, but some of them may be just my phone acting up.
You already addressed one of them by tweaking the the framework-res.apk to update the eri.xml to show Sprint. I have been manually applying the fix after install by copying the eri.xml file to /data.
Another is the gps.conf file is wrong for Sprint (at least me and some others) and does not allow the gps to locate properly. I thought it was just me and ended up extracting the gps.conf file from the stock PL1 ROM, but then ended up making it into a flashable zip when someone else had the same issue and was looking for a fix.
Lately I have been getting an issue with the wifi disconnecting when screen is off and then trying to connect when screen is turned on... sometime is cannot reconnect and I have to turn off the phone and reboot it in order to get wifi to connect (just rebooting does not seem to work??). I have researched this issue on the internet and have tried every solution I could find... nothing seems to permanently fix it. Went back to stock for a few days and it would also disconnect when screen is off but would always reconnect again. Since this is a new issue I picked up in mid April, it might be a hardware glitch since my phone is now just over 4 years old.
Have been using the latest Phantom kernel with this ROM and it is fantastic... great battery life and performance.
Again, thanks for sharing this ROM with the Sprint community!
Click to expand...
Click to collapse