CAMERA MOD for G900F/H/901F [UPDATED 21 Dec] : Improved Quality; Removed Restrictons - Galaxy S 5 Themes and Apps

CAMERA MOD FOR S5 G900F, G901F AND G900H TW STOCK LOLLIPOP 5.0​YOUR DEVICE SHOULD HAVE ROOT ACCESS​​
If anybody want me to port this mod to stock Marshmallow 6.0.1,
Then PM me and send the SamsungCamera3.apk and media_profile.xml after deodexing.​
CHANGE LIST:
IMAGE QUALITY:
• Increased to 100% for Normal Mode (Now you will get 100% quality, Uncompressed).
• Increased to 100% for Burst Mode.
VIDEO QUALITY:
Video Bitrate:
• UHD 4K (3840x2160) : Increased to 70Mbits from 48Mbits.
• FHD (1920x1080) [FRONT, BACK & DUAL-MODE CAMERA; FAST MOTION : 1/2, 1/4, 1/8] : Increased to 25Mbits from 17Mbits.
• FHD (1920x1080)@60FPS : Increased to 50Mbits from 28Mbits.
• HD (1280x720) [FRONT, BACK & DUAL-MODE CAMERA] : Increased to 17Mbits from 12Mbits.
• SLOW MOTION (1/2): Increased to 17Mbits from 12Mbits.
• SLOW MOTION (1/4): Increased to 17Mbits from 12Mbits.
• SLOW MOTION (1/8): Increased to 8.5Mbits from 6Mbits.
VIDEO RECORDING TIME:
• Increased to 30:00 Minutes from 5:00 Minutes for UHD. (Maximum upto 4GB = 8 Minutes : 09 Seconds)
• Increased to 30:00 Minutes from 10:00 Minutes for FHD_60FPS and DUAL_FHD.
SNAPSHOT RESTRICTION REMOVED:
• Now you can Take a Snapshot while recording UHD and FHD_60FPS videos.
• While recording UHD video, 15.9 MegaPixel (5312x2988) stills will be captured.
• While recording FHD_60FPS video, 2.0 MegaPixel (1920x1080) stills will be captured.
FLASH RESTRICTION REMOVED:
• Now you can use Flash even when the Battery is lower than 15%.
NOTE: If the battery is below 15%, then everytime you open Camera app, a Warning pop-up will appear "Flash is turned off to save battery (Below 15%). However you can turn on the flash manually." and the Flash will be Off every time you open the camera when battery below 15%, you have to manually change the Flash.
BATTERY LOW RESTRICTION REDUCED TO 1% FROM 5%:
• Now you can use Camera even if the battery is lower than 5%. (and Greater than 0%).
*********************************************
*** TAKE BACK UP OF EXISTING CAMERA APK AND XML FILE ***​
Steps for replacing Manually.
• Delete all the .odex [If Exist] files (SamsungCamera3.odex and SamsungCamera3.odex.art) present in "arm " folder (system/app/SamsungCamera3/arm).
• Replace SamsungCamera3.apk (system/app/SamsungCamera3) with the one provided in below attached .zip file, based on your device model.
• Replace media_profiles.xml (system/etc) with the one provided in below attached .zip file, based on your device model.
• Set Correct permissions:
• Folder Permission: 0755 [rwxr-xr-x]
• File permission: 0644 [rw-r--r--] for SamsungCamera3.apk and media_profiles.xml
• After replacing the files and setting correct permissions. Wipe Camera data from App Manager; Please go to recovery and wipe the cache then Reboot.
*********************************************
I have slightly modified the Camera icon to confirm that you are having the Modded Camera on your phone.
Modded Icon:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Stock Icon:
*********************************************
If you like this Mod; consider Hitting Thanks
Button.​

there is option for image stabilization?

Thanks for sharing
Is it safe to flash with recovery
G900f boc7

mtayabkk said:
there is option for image stabilization?
Click to expand...
Click to collapse
under lollipop it's known as "Auto night detection"

rami2013 said:
Thanks for sharing
Is it safe to flash with recovery
G900f boc7
Click to expand...
Click to collapse
I change manually the apk and the file and wipe flash, reboot and it's working fine no issue
but what's the difference in term of what whe see picture or video

Work on POD1?

warboss said:
under lollipop it's known as "Auto night detection"
Click to expand...
Click to collapse
thanks bro:good:

Thanks
@rami2013
Stock apk compress the Jpeg images to 96% for Superfime and 92% for Burst mode.
As a result there will be a slight decrease in image quality.
I have changed the compression value to 100%, so we can get full quality image.
You can test this scenario. Just take picture with stock Camera apk and then take the picture in same condition and position with Modded Camera apk.
You'll see the size of the image is high.
Regarding video. It just increase the recording bit rate.
Please read this link Understanding Video Bit Rates and Why They Matter
@igi97
It should work on all unbranded firmware for sure.
Give a try.
@dbowmanda115
I don't have time to make it support Multi DPI. Sorry buddy.
@Sheyder2
Okay. I'll try for it when I get time. Maybe on weekend..

Thanks for this great work! Could you make an app compatible with 400 dpi please?

Nice work.!!!! Try to increase the quality of the video in slow motion.
@MOD work on latest Firmware XXU1POD1 @

Will this work on CM12?

Morph9090 said:
Will this work on CM12?
Click to expand...
Click to collapse
only stock rom

This mod is only on G900F is it? And the G900H will not work on?

Failed when try to flash via twrp

NeoDJW said:
Failed when try to flash via twrp
Click to expand...
Click to collapse
Goodmorning, just replace the apk manually then the other file and reboot
this is a stock camera apk so it work only with touchwiz rom not with CM12 and others
after some test id like to share result:
with modified stock: the quality is little increased when you zoom in the picture you can see the difference
the video is also good but the size is so big and I don't know if it's different mayby more smooth

rami2013 said:
Goodmorning, just replace the apk manually then the other file and reboot
this is a stock camera apk so it work only with touchwiz rom not with CM12 and others
after some test id like to share result:
with modified stock: the quality is little increased when you zoom in the picture you can see the difference
the video is also good but the size is so big and I don't know if it's different mayby more smooth
Click to expand...
Click to collapse
Very nice instructions, what about permissions dude ? Don't talk if you don't know, someone will read this, do it and have no camera because you said '' just replace the apk manually then the file and reboot '' you need to change permisions too!

NeoDJW said:
Very nice instructions, what about permissions dude ? Don't talk if you don't know, someone will read this, do it and have no camera because you said '' just replace the apk manually then the file and reboot '' you need to change permisions too!
Click to expand...
Click to collapse
Seriously it tells you what to do in the OP
both about how to install AND permission changes
you should really read before being a **** to people

Will this mod work on 900m?
Sent from my SM-G900F using XDA Free mobile app

I say it is a matter fail.
no change to the camcorder.
I want to see a screen that shows 8 minutes of shooting full k.

For anyone looking for a multiDPI modded one.
https://www.mediafire.com/?5k00hn86hfhqjpk

Related

[ROM][R800X][2.3.3]-Cola- Geared Towards Speed

Made for locked bootloader R800x. I haven't tested this on anything else
Use at own risk
This ROM is made for gaming.
(archive is 54 megabytes)
this is stripped down and geared to speed. No fancy UI. No lag causing effects.
App drawer opens and closes in 1 fraction of a second.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Banners to show your support. Feel free to use
Features:
Based on 2.3.3 R800X Stock ROM
------------------------------------------------------------------------
Code:
numerical battery bar
fast photo gallery
host file edited to block advertisements
Script manager integrated
Hard to kill launcher
Supercharger script integrated and activated to run on boot
CWM Recovery Pre-installed
All bloatware removed.
boot animation replaced
optimized for speed
optimized file size
removed camera shutter sounds, removed video shutter sound
remove lag causing elements
file manager built in
usb debug and unknown sources turned on
Install guide:
-Make sure your battery is atleast 50% for saftey reasons.
-Make sure you are rooted & have CWM Installed
- Extract Cola_X.X.X Archive File
-Place Cola_X.X.X Folder inside clockworkmod/recovery/ located on your SD card. (If the folders dont exist create them)
-Reboot phone and push down on volume button till Recovery screen comes up.
-Select - "Backup and Restore" option with volume rocker and hit HOME.
-IMPORTANT: Make a backup of your current ROM incase you want to revert later.
-Hit back to main menu of recovery and select wipe cache partition.
-select -Backup and Restore/ Restore / Cola_X.X.X then hit HOME
-Wait for the files to finishing flashing and REBOOT SYSTEM NOW option.
Click to expand...
Click to collapse
Known Bugs:
ROM breaks with factory data reset. do not perform it.
just restore nandroid if you need to clear data / restart fresh
Hope you Enjoy.
If you have any questions just ask here I will try to help.
If you have any suggestions to make ROM faster or smaller please let me know.
Future plans:
Integrate latest market into rom
Integrate other tools and spare parts
Optimize for more speed
New Version Cola6
http://www.sendspace.com/file/heowpx
second download location.
http://tinyurl.com/6uwywwf
1.0.2 changelog:
Integrated persistant supercharge script (faster multi task and such)
Integrated Script manager
Added hard to kill launcher
Removed unnecisary files for lower size
Fixed app drawer problem
Lowered archive size.
1.0.3
changelog:
added numerical %' battery bar
removed 3d photo gallery (creates lag) replace with low memory/ low size photo gallery
removed other file systems not needed
fixed few minor bugs
total archive size reduced to 56 megabytes
1.0.4 changelog:
integrated latest market.
made archive smaller (54mb)
1.0.5 changelog:
fixed google talk error that was making rom unusable.
​
Thanks, I feel bad for r800x owners they need more stuff.
Sent from my R800i using Tapatalk
Clienterror said:
Thanks, I feel bad for r800x owners they need more stuff.
Sent from my R800i using Tapatalk
Click to expand...
Click to collapse
You're welcome
If you have any improvements please let me know.
Please upload some pictures of this room.
And thank you
New pictures coming soon.
If you do a factory data reset you will loose super charge and hard to kill launcher properties
Also it will remove home button binding in /system/usr
If you need to reset do it from CWM not in privacy options.
Awesome! Will try this out this weekend.
TheAugust said:
Awesome! Will try this out this weekend.
Click to expand...
Click to collapse
cool! hope you like!
Can someone upload as zip instead of 7z
doua27 said:
Can someone upload as zip instead of 7z
Click to expand...
Click to collapse
I would help but I'm not at the computer right now.
Just use winrar or 7zip if your on windows
both are free
does this optimises the battery?
Hogwarts said:
I would help but I'm not at the computer right now.
Just use winrar or 7zip if your on windows
both are free
Click to expand...
Click to collapse
Thanks but I'm not at a computer too but I want to test it right now lol
Nice ROM mate, how about making the same for R800i too?
Magnumutz said:
Nice ROM mate, how about making the same for R800i too?
Click to expand...
Click to collapse
I would but I don't have a 800i to test with
sorry!
Also tomorrow I'm adding percentage battery for
Ease of use / function
Trancicted said:
does this optimises the battery?
Click to expand...
Click to collapse
Yes and no.
Ill add a script tomorrow that will improve battery life
But yes it already does because of low memory use
I have an R800i, so it won't work with mine?
Trancicted said:
I have an R800i, so it won't work with mine?
Click to expand...
Click to collapse
Well the R800x uses CDMA instead of Gsm so you wouldn't have phone service lol
other than that I don't know.
You could test for me. I'm sure the phone wont work tho. Just make a backup before you flash
Can over clock on this rom
nick4nick said:
Can over clock on this rom
Click to expand...
Click to collapse
Not yet. but I hope we can soon.
It's setup to be very fast tho. probably the fastest that it can be without overclocking.
I just added images and other new information to the first page.
Here is one I just added
The next update coming is going to integrate new market into rom
You know what would be missing in there aswell?
the T-Mobile Theming Engine >_<
Thanks for your hard work

CAMERA MOD FOR N910F/C/G/H 5.1.1 [UPDATED 18 Dec]: Improvd Qualty; Removd Restrictons

CAMERA MOD : NOTE 4 N910C-N910F-N910G-N910H LOLLIPOP 5.1.1
THIS MOD IS ONLY FOR SAMSUNG TOUCHWIZ BASED ROM (STOCK/CUSTOM)​YOUR DEVICE NEED ROOT ACCESS
PLEASE READ COMPLETE POST BEFORE POSTING ANY QUESTION
I have attached the instructions and new modified files in Post #262.
If somebody interested to try and test then do it.
And let me know if it works or not. (Stock ROM preferred)
None of the Camera Mod apk are tested.
As I can see that many user are saying Mod is not working.
​
CHANGE LIST:
IMAGE QUALITY:
• Increased to 100% for Normal Mode (Now you will get 100% quality, Uncompressed).
• Increased to 100% for Burst Mode.
VIDEO QUALITY:
Video Bitrate:
• UHD 4K (3840x2160) : Increased to 70Mbits from 48Mbits.
• FHD (1920x1080) [FRONT, BACK & DUAL-MODE CAMERA; FAST MOTION : 1/2, 1/4, 1/8] : Increased to 25Mbits from 17Mbits.
• FHD (1920x1080)@60FPS : Increased to 50Mbits from 28Mbits.
• WQHD (2560x1440) [FRONT & BACK CAMERA] : Increased to 40Mbits from 25Mbits.
• HD (1280x720) [FRONT, BACK & DUAL-MODE CAMERA] : Increased to 17Mbits from 12Mbits.
• SLOW MOTION (1/2): Increased to 17Mbits from 12Mbits.
• SLOW MOTION (1/4): Increased to 17Mbits from 12Mbits.
• SLOW MOTION (1/8): Increased to 8.5Mbits from 6Mbits.
VIDEO RECORDING TIME:
• Increased to 30:00 Minutes from 5:00 Minutes for WQHD and UHD. (Maximum upto 4GB = 8 Minutes : 09 Seconds)
• Increased to 30:00 Minutes from 10:00 Minutes for FHD_60FPS and DUAL_FHD.
SNAPSHOT RESTRICTION REMOVED:
• Now you can Take a Snapshot while recording UHD, WQHD and FHD_60FPS videos.
• While recording UHD & WQHD video, 15.9 MegaPixel (5312x2988) stills will be captured.
• While recording FHD_60FPS video, 2.0 MegaPixel (1920x1080) stills will be captured.
FLASH RESTRICTION REMOVED:
• Now you can use Flash even when the Battery is lower than 15%.
NOTE: If the battery is below 15%, then everytime you open Camera app, a Warning pop-up will appear "Flash is turned off to save battery (Below 15%). However you can turn on the flash manually." and the Flash will be Off every time you open the camera when battery below 15%, you have to manually change the Flash.
BATTERY LOW RESTRICTION REDUCED TO 1% FROM 5%:
• Now you can use Camera even if the battery is lower than 5%. (and Greater than 0%).
*********************************************
*** TAKE BACK UP OF EXISTING CAMERA APK AND XML FILE ***​
Steps for replacing Manually.
• Delete all the .odex [If Exist] files (SamsungCamera3.odex and SamsungCamera3.odex.art) present in "arm " folder (system/app/SamsungCamera3/arm).
• Replace SamsungCamera3.apk (system/app/SamsungCamera3) with the one provided in below attached .zip file, based on your device model.
• Replace media_profiles.xml (system/etc) with the one provided in below attached .zip file, based on your device model.
• Set Correct permissions:
• Folder Permission: 0755 [rwxr-xr-x]
• File permission: 0644 [rw-r--r--] for SamsungCamera3.apk and media_profiles.xml
• After replacing the files and setting correct permissions. Wipe Camera data from App Manager; Please go to recovery and wipe the cache then Reboot.
NOTE:
Fix Shooting Mode FC Problem See Post #66 by @lenidomauricio. Thank You lenidomauricio
*********************************************
I have slightly modified the Camera icon to confirm that you are having the Modded Camera on your phone.
Modded Icon:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Stock Icon:
*********************************************
If you like this Mod; consider Hitting Thanks
Button.​
is only valid for version BOB4 ??
If you installed on BOC3 version, it would ?? It is valid for odex and deodex ??
A greeting and thanks for your work
N910C did not work....
N910F it works. Dont forget to set permissions and clean the Cache. Direct after put the Files i had a FC from the Camera, but after doing the steps from OP the camera works.
Thank you
@farid1979
Thanks for confirming that it's working fine.
Can you please check the video bitrate of Slow Motion recording (1/2, 1/4 and 1/8) and let me know the bitrate.
@kikiri
I will update the N910C camera by tomorrow or day after tomorrow.
Sorry for the inconvenience caused. I thought it will work on both N910F and N910C.
Please send me the SamsungCamera3 folder for N910CXXU1BOC3 for XEO (Poland), I will upload Mod by Tomorrow.
@ang3lical
It should work on both odex and Deodex firmware. And the camera file that I have Modded is from N910FXXU1BOB4, But it should work absolutely fine for BOC3 as well.
@cosi2707
If you are on Custom ROM the you might not have arm folder (odex files).
No need to worry about it,
Just take a back up of it and then replace it with the files provided in attachment, and set correct permissions.
Ok, wait few minutes. I check it.
Hi guys, please helpme. Where is the odex file camera for delete it. I can't found this file. Thanks
Sent from my SM-N910F using XDA Free mobile app
Ok, i have look for the bitrate :
1/8 = 2,6Mbit with 15fps
1/4 = 2,1 Mbit with 15fps
1/2 = 1,8 Mbit with 15fps
The Resolution is 1280x720
The quality of the Video is very bad, it's laggy like a 10 years old mobile Phone.
@farid1979 , @dehnhaide
I have attached flashable zip, please confirm whether flashing is working fine or not.
Slow motion video recording is Fixed.
@kikiri , @TEOKARAFOU , @kouklakis
First Post (OP) updated with Flashable zip for N910F and N910C.
@willowpc
It should work on all N910F and N910C base.. All unbranded firmwares.
No Problem. I never use slow motion. After the slow motion videos i make a Video in Full HD 60fps Modus.
Here the result :
59,1 Mbit, 59fps, 254kBits/s 2channel 48 kHz Sound
This is perfect [emoji4]
And I see, you have increased the time from 5 to 30 minutes in UHD Mode
Working on BOC3
I can confirm that is working on [ROM][N910F][ALEXNDR] ★ BOC3 ★ with BTU CSC Code (UK & IRE)! Good job!
Will try on BOC6 910g Rom
Good job my friend @amk19 I will wait for the 910C.
Let's take some quality photos ?
Waiting for 910c
affa112
its working on my note 4 910h(simplerom 910c)
great job!!
@amk19 : Can you build a flashable zip from your great work?
Farid
Is there any possibility to your N910C BOC3 mod work too on the BOC5 base ?
willowpc said:
Is there any possibility to your N910C BOC3 mod work too on the BOC5 base ?
Click to expand...
Click to collapse
should working ... just make a backup ... just in case , mate !
@amk19
N910C working...
flashed in recovery...
Thanks....
I cant understand the description can anyone help with the step by step method of how to carry out this. I think the developer jumped step forgetting that we still have noobs all around. Lol

new gcam for nokia 7.1

does anyone have gcam for nokia 7.1 based on android 10.
Gcam for nokia 7.1 android 10 pls
Check https://www.celsoazevedo.com/files/android/google-camera/dev-parrot043/.
it doesn't work. shutter button freezes.
I haven't found a Gcam that work on our Nokia 7.1 running Android 10.
By default they do nothing or freeze if pushing the shutter button.
If changing the output folder to the common DCIM/Camera, they save a fully green picture. So there was probably a folder access right issue at first. Now there is still a problem with the GCam's config vd or phone.
Can you please post the link of a working gcam mod for nokia
ASHWANI189 said:
Can you please post the link of a working gcam mod for nokia
Click to expand...
Click to collapse
None works at the moment.
I've had a look at my logcat, and I think it's an issue with SELinux - several related errors appear when clicking the shutter button:
Code:
E SELinux : avc: denied { find } for interface=vendor.qti.hardware.servicetracker::IServicetracker sid=u:r:system_server:s0 pid=1440 scontext=u:r:system_server:s0 tcontext=u:object_r:default_android_hwservice:s0 tclass=hwservice_manager permissive=0
E SELinux : avc: denied { find } for interface=vendor.qti.hardware.servicetracker::IServicetracker sid=u:r:system_server:s0 pid=1440 scontext=u:r:system_server:s0 tcontext=u:object_r:default_android_hwservice:s0 tclass=hwservice_manager permissive=0
I QCamera : <HAL><INFO> handleMetadataWithLock: 4347: End of reporting error frame#=805, streamID=5 mCameraId: 0
I QCamera : <HAL><INFO> handleMetadataWithLock: 4498: Stream STATUS_ERROR frame_number=805,streamID=5 mCameraId: 0
I QCamera : <HAL><INFO> handleMetadataWithLock: 4507: CAMERA3_BUFFER_STATUS_ERROR frame_number=805,buffer=0xeb208f80 mCameraId: 0
Maybe setting SELinux to permissive will improve the situation? I cannot test this, due to some remotely administered apps on my phone.
Before, there's also some OIS related error (the Nokia 7.1 doesn't have optical stabilization), but I think that's fine, as they appear during the view targeting too.
There's also more errors about a linearization module:
Code:
E mm-camera: <ISP ><ERROR> 281: module_linearization40_update_sudmod_enable: failed !! linearization40_update_base_tables
E mm-camera: <IFACE ><ERROR> 2473: iface_axi_handle_output_error: iface_axi_handle_output_error: OUTPUT_ERROR session_id 3
E mm-camera: <IFACE ><ERROR> 2291: iface_axi_fill_framedrop_struct_from_bufq_handle: Error! Uncleared Error mask 0x200 frame_id 9
ASHWANI189 said:
Can you please post the link of a working gcam mod for nokia
Click to expand...
Click to collapse
Yesterday's December security update fixed the issue for me!
EDIT - and it's gone. It worked the first time I opened the app, saving photos; and now it got broken again. Really weird.
Exactly man
Also when I reboot my phone ,it works and then again it breaks.
Hi, In my case the app cannot write in the gallery. I take the photo but is not written in the folder....
Gcam was so perfect, I hope we can get it back.
ASHWANI189 said:
Exactly man
Also when I reboot my phone ,it works and then again it breaks.
Click to expand...
Click to collapse
Same here. When I restart the device, the Gcam works for some time, it can take a few shots. Then after a while, it again stops working. Nokia 7.1 TA-1097.
Gcam- Tried with all compatible ones.
sylarm said:
Hi, In my case the app cannot write in the gallery. I take the photo but is not written in the folder....
Gcam was so perfect, I hope we can get it back.
Click to expand...
Click to collapse
Try to select Google Photo Gallery in Gcam settings. If I select it, HDR+ is working for me (but not the Night Shot - if I use it, it stops saving again). I'm using Cstark's mode.
Hi,
I heard this one is working:
https://www.cyanogenmods.org/downloads/cstark27-google-camera-7-2-014-pxv4-1-1/
At N6.1, N6.1+, N7.1, N7.1+ it works good! Android 10.
https://4pda.ru/forum/index.php?showtopic=896941&view=findpost&p=92736092
Download https://mega.nz/#!4YYmXKzR!kJ7eMJl_Abqi-qEBG5pebk3S3daE-4I2LhiJ1a1HAH4
From Nokia 7 plus google camera HDR+ ZSL
This might be the one. A few hours after install, it still hasn't blown out, and is saving proper pictures. After following the "Instalation and crucial settings tutorial"
Google CAMera v7.2.014 PX MOD v4.3 port by @cstark27
This has turned into a collaboration between @cstark27 @back.rider555 @johngalt1
Changelog:
Add "PX" to EXIF software tag to help differentiate photos from PX Mod
Enable HDR+ Enhanced on Pixel 4 (turn on in Settings>Advanced)
Add manual exposure slider which will hide when appropriate. You must enable the slider in PX Mod Settings>Manual Exposure Control near the bottom. You must use Night Sight, Portrait Mode (with PX Mod Settings>Portrait HDR+ Enhanced), or Camera Mode (use HDR+ Enhanced).
Download:
https://www.celsoazevedo.com/files/android/google-camera/f/changelog959/
Instalation and crucial settings tutorial:
Uninstall previous Camera PX and Camera P3 if you still have it.
After uninstall delete whole DCIM folder in a phone internal memory (non-mandatory)
Then after installation, clear app data of Camera PX.
Disable Motion Photos (mandatory)
Disable Super Resolution Zoom (mandatory)
Disable Force Sabre Merge Method (OFF) (mandatory)
Restart phone!
Complete settings tutorial:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note:
Video stabilization: Nokia 7+ doesn't have Optical Image Stabilization (OIS) so disable this option.
Also sound is garbage on every GCam port, so for video purposes is better to use a Nokia camera app.
NON-ZSL frame count: Choose between 5 or 7 or 10 or 15 (test yourself - 7 is my choice now)
Selfie illumination for the front camera: your choice
Face retouching for the front camera: OFF or Natural
Click to expand...
Click to collapse
A small update about this "Google CAMera v7.2.014 PX MOD v4.3 port by @cstark27" :
It works quite well!
After a few days (and not 10mn like the previous version), it will stop working. But instead of not taking photo, it reboots my phone. Weird, but on the other hand it kind of auto-resolves the issue.
This one works:
Hi guys. I tested this one (v7.2) on my Nokia 7.1 and it works all fine, excepet the slow motion. The potrait works, the camera works, video works, night sight too, all of this with all the hdr options.
Link:
I can not post the link, as i am 10 posts back...i'll provide it afterwards, btw, the mod is of the cstar developer (cynogen mod).
This has been working well for me on my T-185 version of the Nokia 7.1
https://www.celsoazevedo.com/files/android/google-camera/dev-arnova8G2-beta/
The newest update as of this post is
GCam_5beta9.200130.0245build-7.3.018.apk (Arnova8G2, 2020-01-30
I have not yet tried this one, but the previous version works like a charm.
UPDATE: The 7.3 update mentioned above DOES NOT work on my phone. I've reverted back to the last 7.2 release.
akshat_mishraa.__ said:
Hi guys. I tested this one (v7.2) on my Nokia 7.1 and it works all fine, excepet the slow motion. The potrait works, the camera works, video works, night sight too, all of this with all the hdr options.
Link:
I can not post the link, as i am 10 posts back...i'll provide it afterwards, btw, the mod is of the cstar developer (cynogen mod).
Click to expand...
Click to collapse
Can you share the link please?
Now Google CAMera v7.2.014 PX MOD v4.3 port by @cstark27 stop working for me.
I hope we can have one gcam working soon....

[MAGISK MOD] ButterMinimal v4.5.1 for Any Android 10/11 | Minimal Version of ButtersExtended

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​ButterMinimal​
ButterMinimal is a Minimal Version of ButtersExtended/Limits/Fly that is made for the OnePlus 7 Pro Series and can be found here on OP7P Thread
=======​-ButterMinimal comes with-​
-Prop Tweaks - Includes Smooth UI, Smooth Scroll, Some battery tweaks.
-Mount Tweaks - Good for Performance balance
-Database Optimization Tweaks
-UGMS Doze
-Some More Doze (This will not affect your daily driving (bug-free))
-Disables some Idle servers
-Removes Logs, Cache files, Temp. Files, etc. on each boot
This Minimal version comes with Butters's good and essential tweaks that will increase some battery backup, UI Smoothness, performance, and scrolling touch experience altogether in some amount.
=======​-Requirements-​
Any Android 10 or 11 ROM with any Kernel
Latest Magisk
=======​-Installation-​
Download and install it in Magisk Manager, then reboot.
NOTE:
-If you have any Butter Installed then installation will take care of it automatically.
=======​-Uninstallation-​
Please find Butter uninstaller zip file in your phone storage and Install that in Magisk Manager to completely uninstall any Butter
-If you remove it from Magisk Manager or delete Module folder directly then it will not remove Butter completely, you may get messed up. In case you do this, you will need to install Butter again reboot and then use Butter Uninstaller.
OR
You can find uninstaller in attached file with this post
=======​-What if you already have UGMS Doze?-​
You should remove it first. Actually, it will not give any issues but will give the same results
Remove it just to be for some case conflictions
=======​-Download Here-​v4.5.1
AndroidFileHost Server
(Please Don't make mirrors)
=======​CREDITS:​
Any Credits are coming from here
=======​
If you Like my works or like ButterLimits​- You can donate to me by buying me a coffee of your choice​Or​- You can Donate to me here - Playstore Link​
Changelogs​
Changelogs v4.5.1​Changes from v2.0 to v4.1​-Some Options Added-
--AdAway
--Busybox Android-NDK
--Force Highest Display Refresh Rate available
--SELinux Enforce or Permissive
--Disable Secure Flag
You can use Volume buttons to select your option
-Other Changes-
--Many Internet Tweaks for Internet
--Many Internet Tweaks to save battery and memory
--Safely selected Mount Tweaks for better balance [Smooth Performance and Battery]
--Some more kernel-level I/O tweaks were added [safe]
--Optimizations for some launchers, SystemUI, and some more apps.
--ButterMinimal version will show in device settings About Screen
--You will get the ButtersUninstaller zip with it
Latest Verison 4.1​
You can check change logs in Post #2
Download Link updated
Regards
Mohitash
Hello,
After installing this module on OP6, there is no additional options to change the settings? For me there is no application that allow to change anything, I understand that this minimal version allows to influence a few options during installation (exactly 5 indicated in the post no. 2)?
I prefer to make sure my phone / installation is ok.
piekny said:
Hello,
After installing this module on OP6, there is no additional options to change the settings? For me there is no application that allow to change anything, I understand that this minimal version allows to influence a few options during installation (exactly 5 indicated in the post no. 2)?
I prefer to make sure my phone / installation is ok.
Click to expand...
Click to collapse
Installation should be ok for sure same as you install other magisk modules
You can find the Magisk Module folder ib /data/adb/modules/
All files will be at their place.
All tweaks will be working
And options to install like AdAway, if you selected yes then you can see that in your phone (AdAway App pre-activated.
Regards
Mohitash
Can I use this with fde.ai?
Mohitash said:
Changelogs​Changes from v2.0 to v4.1​-Some Options Added-
--AdAway
--Busybox Android-NDK
--Force Highest Display Refresh Rate available
--SELinux Enforce or Permissive
--Disable Secure Flag
You can use Volume buttons to select your option
-Other Changes-
--Many Internet Tweaks for Internet
--Many Internet Tweaks to save battery and memory
--Safely selected Mount Tweaks for better balance [Smooth Performance and Battery]
--Some more kernel-level I/O tweaks were added [safe]
--Optimizations for some launchers, SystemUI, and some more apps.
--ButterMinimal version will show in device settings About Screen
--You will get the ButtersUninstaller zip with it
Click to expand...
Click to collapse
did the mode increase the refresh rate from 60 to any other?
When my Phone get 25% or less Battery, then a few apps like tiktok, clash Royale or pubg mobile crash always after a few seconds
Gamlerr said:
When my Phone get 25% or less Battery, then a few apps like tiktok, clash Royale or pubg mobile crash always after a few seconds
Click to expand...
Click to collapse
I don't think that's by this mod.
vyshnav said:
did the mode increase the refresh rate from 60 to any other?
Click to expand...
Click to collapse
This forces to highest display refresh rate whatever highest available
v4.5​
Changes-​-Updated AdAway
-Fixed Force Highest Display Refresh Rate globally (in all apps/games)
-Fixed Long delay on Unlocked Bootloader warning screen while booting
Mohitash said:
v4.5​​Changes-​-Updated AdAway
-Fixed Force Highest Display Refresh Rate globally (in all apps/games)
-Fixed Long delay on Unlocked Bootloader warning screen while booting
Click to expand...
Click to collapse
New version not installing... Its showing as installation failed
vyshnav said:
New version not installing... Its showing as installation failed
Click to expand...
Click to collapse
Tried before uninstallation of old one. Tried after uninstallation of old one.. still this window
Mohitash said:
I don't think that's by this mod.
Click to expand...
Click to collapse
I think it is, because I uninstalled the module and now the apps are not crashing anymore
This post is Useless now...so Content deleted.
vyshnav said:
Tried before uninstallation of old one. Tried after uninstallation of old one.. still this window
Click to expand...
Click to collapse
Thank you for the report
Package Re-uploaded with v4.5.1 code with a fix for installation failed.
Please Download again
Regards
Mohitash
Mohitash said:
Thank you for the report
Package Re-uploaded with v4.5.1 code with a fix for installation failed.
Please Download again
Regards
Mohitash
Click to expand...
Click to collapse
Working fine
This app seems great, but anyway, where can I find that uninstallation package? I can't find it in my internal storage.
kouzelnik3 said:
This app seems great, but anyway, where can I find that uninstallation package? I can't find it in my internal storage.
Click to expand...
Click to collapse
Same here
I have Attached the Uninstaller with the first post.
Install in Magisk and reboot
Regards
Mohitash

General [Update].[A13] SparkOS GSI v.13.4 Build 16-01-2023 Unofficial. (New Spark Launcher) (Base T225XXU1CVL5)

Why? Used Android 13 Base.
1. MTP works
2. Offline Charging works
3. Google Assistant can call for you.
<This topic is about new GSI's introduction not howto or tutorial.>
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Changelog for the version v13.4 based on the January security patch
# Version 13.4
- Merged the January Security Patch
- Corrected the unlocking animation for sideFps devices
- Improved Battery level detection for bt Devices
- Adressed some crashes when using the recording button in gamespace
- Improved the Auth ripple animation
- Introduced AOSP boost and memory optimization framework API
- Added support for strict standby policy
- Synced anim durations with Nothing Phone 1
- Added back our weather implementation
- Added selectable ls clock fonts
- Brought back the old media player seekbar animation
- Made the squiggle animation optional
- Added a toggle for hiding notification icons
- Added configurable lockscreen clock color option
- Made more elements follow the systems font
- Added optional haptic feedback to volume panel
- Improved the Bt tile
- Fixed double tap to wake on doze
- Fixed an issue where a white tint would appear in yt videos when adjusting the volume
- Fixed an issue where old settings panel would overlap the volume dialogs default one
- Added an option to pulse on new tracks
- Improved the charging info impl
- Majorly Reworked our Launcher: It includes plenty of redesigns and a bunch of new options
- Added support for custom themed icon pack selection
- Introduced our SparkThemedIcons icon pack
- Merged Crowdin translations
- Revamped the Fireworks Ui
- Added support for googles ultra battery saver
- Added support for googles security hub
- Added a toggle to switch between aosp and pixel battery graphs
- Fixed an issue where battery page would appear empty
- Added a new animation on dark mode settings
- More under the hood improvements aimed to improve the overall systems stability
-Download here :
Gsi_projects - Browse /A13/SparkOS/16012023 at SourceForge.net
sourceforge.net
*Note: Variant "slim" = Read only system.
✓ Supported exFAT micro sdcard.
✓ Default Nazim's GSIs are R/W except "slim" variant
✓ Make CustomAP & Flash with odin.
✓ Changes Display smallest width= 598 dp
*Now you are good to go.
Options
✓ install PHH-SU though Magisk + Root Explorer. (Cause no TWRP)
*I don't use Magisk
✓ Compatible with Vaga Bobo DSU sideloader v2.01
Example: new launcher
you can install NetHunter
https://www.maketecheasier.com/install-kali-linux-nethunter-android-phone/
Offline-Charging
Turn off display alert.
- Setting>>Display>>off Wake on plug
- Fireworks>>Lockscreen>> off Charging animation
@tom.android as you may remember, we recently had a conversation about placeholder threads. You need to post a description as well as a download link as soon as possible, otherwise this thread will be locked.
Taking launcher a ride , looks good
Can someone make a tutorial to make a custom ap? I never flash a GSI before
Lizsca said:
Can someone make a tutorial to make a custom ap? I never flash a GSI before
Click to expand...
Click to collapse
[GUIDE] [T220/T225] Flash a GSI on the A7 Lite (without TWRP)
Hi everyone, this is a short guide on how to flash a GSI on the A7 Lite (without TWRP). Its a nice little tablet for the price but it doesn't have a very powerful SOC and for me the One UI is barely usable on this device. The launcher and the...
forum.xda-developers.com
update new launcher.
I tried but odin failed. I can't seem to get this going working on my tablet (t220XXU1CVL5 android 13) . I gave up. I tried many times. Everything worked good with custom AP. But failed in odin 3.14.1.3B patched.
Putting back my custom AP pixel experience plus arm64 vndkite 13.0 20230104 unofficial. It works very well on my T220 XAR.
Here is the odin failed picture
abc1054 said:
Here is the odin failed picture
Click to expand...
Click to collapse
Please check your customAP(super.img) write fail to partition.
name may be wrong filename
-must be " super.img.lz4" not super_new
Ok thank you
There's only two files in the custom ap , when I opened it. The files were super.img.lz4 and vbmeta.img.lz4. Is that right...? when I did another custom ap it had lots of other files in it.
Is my app batch file problem?. The file is tar-md5-script-tool.zip. I got it in custom AP forum. I know I made a mistake. Missed a step. Lol
Thank you tom...your the best
Well, it still didn't work. Stays on the setup splash screen and that's it. Oh well. Back to the drawing board.
Had more problems .
abc1054 said:
There's only two files in the custom ap , when I opened it. The files were super.img.lz4 and vbmeta.img.lz4. Is that right...? when I did another custom ap it had lots of other files in it.
Click to expand...
Click to collapse
Not at all.
abc1054 said:
Is my app batch file problem?. The file is tar-md5-script-tool.zip. I got it in custom AP forum. I know I made a mistake. Missed a step. Lol
Click to expand...
Click to collapse
Lots of steps on how to build a GSI actually. That batch file is literally one of the last steps. You need to review the GSI guide thread carefully. It's not easy for beginners. Firmware VL7 is now available for the XAR region so you can use that base instead. Good luck.
Ok thanks
abc1054 said:
Ok thanks
Click to expand...
Click to collapse
Or use the automated WSL/Linux script thread.
nirogu325 said:
Not at all.
Lots of steps on how to build a GSI actually. That batch file is literally one of the last steps. You need to review the GSI guide thread carefully. It's not easy for beginners. Firmware VL7 is now available for the XAR region so you can use that base instead. Good luck.
Click to expand...
Click to collapse
Sorry to heard that my topic is not "Howto or Guide or Review but only General information only . please re-read it. Thanks

Categories

Resources