So, every now and again, usually while I'm scrolling through a page (up and/or down), it's like the screen registers a touch or even a movement in a different location of the screen, often leading to the statusbar pulling down (even though I wasn't touching anywhere near the statusbar), or, if I'm scrolling through the app drawer, the phone will launch an app that I never even placed my finger over while scrolling.
It's kind of driving me bonkers, and I'm wondering if this is something software related that is affecting multiple users, or if I have some sort of wonky hardware issue with my own device that isn't affecting other people.
Any input is appreciated. Thanks!
Just an update on the situation. I had the phone replaced and still noticed finicky touch screen response.
Determined that there was a common denominator between both phones, that being the BodyGuardz screen protector.
After removing that screen protector, touch response is now crisp, precise, and consistent.
Related
Hi
There's allot of improvements, shells, skins..... that are finger-friendly...
I Really like it finger-friendly, it is more comfortable and usually looks good.
I've noticed that the TOUCH PAD of the IPhone is very sensitive for finger touch, while the Hermes needs a very hard touch (Relatively).
Is there a (hard) sensitive touchpad (Digitizer) for heremes ? (something more finger-touch friendly...)
I was looking in ebay, and noticed that there are 2 kinds of Digitizers, does someone knows the difference ?
Digitizer G1
Digitizer G2
Tnx.
I'm afraid neither of those will do what you might think they'd do. The term digitizer refers to a module that consists of a matrix to sense particular change of state in one (or more) given point(s) and translate that as coordinates data in digital form.
There are maybe 2 revisions of them in the ebay links you attached but I don't think they work differently, perhaps one has better sensitivity or responsiveness.
Digitizers activated by pressure works differently than ones activated by mere touch (capacitance). The first is noticable by the requirement of stylus or something to "press" a point to "short circuit" a tiny area in 2 thin layers that are stacked together, they know where the "short circuit" is and report that as the touch point. The latter is activated by the fact that the touch actually alters the "electrical charge" of that particular area.
Common portable devices nowadays still use the press-type, usually it is completely separated from and installed on top of the LCD (if you look closely to your screen when it's turned off you'll notice tiny dots which is the matrix), that's why sometimes they slide around and you have to recalibrate your touch screen. I hope this makes sense.
KaiserVideoDriver has it correct. That's why the iPhone has such a sensative touch screen. Also, I believe that the resistance based touch screens that our phones use are not capable of registering mulitple touch pionts, which is why Apple had to go the opposite route...in order to facilitate the multi touch interface.
From time to time I try and use my Hermes without the stylus, but I constantly find myself either tiring of the constant finger prints and smudges, or I get aggrevated over the touch screen seeming to have a fit from time to time and register touches wrong. It seems to be calibrated for the stylus (i.e. a small, firm touch point); the larger, spread out touch point of a meaty fingertip seems to drive the screen crazy and cause it to register the touch to either of the upper corners. Infuriating when it closes a program or tries to cancel an SMS on you.
Wow. Just noticed something really odd with the keyboard/screen, but then it could be my phone!
If put your phone on a flat surface (ie table) - try type some letters on the right/left/bottom edge - i find it not as responsive as if you typed in the middle part of the screen. But if you hold the phone in your hands, its perfectly fine!
Anyone else getting that weird problem?
Yep
Noticed the problem to.
I'm guessing there is some screen sensitivity changes when it knows its flat on a surface.
I guess its another on the list of things to fix when the release a new build (or some devs release soem cooked ROMs).
I wonder if this is related to the capacitive nature of the touchscreen? I can replicate the effect if the phone is flat on the surface and I'm only touching it with my typing finger. However, if I rest another finger on the device, or hold it lightly by the edges (still sitting flat on the surface) it works fine.
If this is the case, I doubt any rom will be able to fix it since it is likely to be the capacitive touch screen technology and not a software "fault" per se.
Regards,
Dave
I have seen this too. I wondered if it was a perspective thing - are you pressing the right part of the screen?
are you pressing the right part of the screen?
Click to expand...
Click to collapse
Oh yeah, looks like I am pressing the right part. It just have to be more firmer pressing those edge buttons. It doesn't matter which way the keyboard layout is.
Anyway, thanks to everyone confirming that you got the same problem. I would have thought it was hardware related, but it could be software related I suppose. Perhaps whatever software is trying to rotate the keyboard is having a hard time to work out what direction to show the keyboard is causing that weird problem
Try holding the phone between thumb and forefinger whilst it is on a flat surface and then typing. If I do this, I have no issues, but the second I remove my fingers, I then get the lack of response for the keys on the bottom row of the device.
Regards,
Dave
mines the same may be to avoid key presses in your pocket?
I have the same problem too. It isn't a problem with all capacitive screens as the iphone never used to do this (l know, I know)
So far I've found no solution, let's hope it gets a quick fix
wow, and I thought it was only me, when I put the phone on the desk, and try use my fingers it becomes really unresponsive but when I'v got it in my hand and I'm using my thumb its all fine, hmmm really weird
it's not really a fault, but more of the nature of the capacitive screen and/or software. In comparison with the iPhone, the iPhone's capacitive screen lets you type/navigate with the phone lying on a flat surface. I find that the Hero's screen requires you to apply a tiny bit more pressure and more surface-area of your finger/thumb, for it to respond. I hope HTC somehow tweak the software for this to be more responsive with less pressure/surface-area contact required so it is usable on a flat surface - don't always want to be picking my phone up to use it at work.
i confrim, using hero without touch the metal edge result in less responsivity and difficult on multitouch operation
hope new firmware can solve this, too many errors using it like a normal keyboard on a table!
Noticed the same problem when using the Hero in my In Car Holder. Makes data input into CoPilot very difficult indeed.
A couple of observations...
I actually have mine in one of those Silicon Covers - the new style 'Gel' ones (work really well and looks good too, unlike old Silicon ones). So it's not actually about having contact with metal as such.
Problem does not occure when plugged into USB.
Now this bit could just be perception rather than reality, but I tried typing while flat (USB disconnected) when touching the coated surface around the trackball and it did not seem to improve things. Trying to do the same while touching the metal area around the speaker grill did seem to improve things. You guys observing similar ?
Anyway, I'm hoping that when I have my car charger, it will fix my CoPilot problem since this should be the same as having the USB plugged in.
Zuber
Am I the only one having really poor touch recognition on my A43? Whether I use a finger or stylus, it often happens--about once in five keystrokes or more--that after releasing the touch on an on-screen keyboard, a different key additionally gets registered, sometimes not even a neighboring key. It is very hard to type in a password.
My touchscreen also has this problem. I'll hit one key and it will add another key somewhere entirely else on the screen. Menus will spaz out when I try and scroll through them.
Oh yeah, remember that problem I was having where strange spots showed up on the screen and I had to get it RMA'd? That came back on my BRAND NEW unit. I'm getting sick of the crappy screen on this otherwise great unit =[ Maybe Archos will just give me a refund and I can spend my funds on an unlocked/off contract phone with similar specs.
Sadly, I think this is a hardware issue. I'm not sure there's anything firmware can do besides ignore half of the inputs. But then, you have a non-responsive issue ...
Have you guys tried to calibrate the screen through SDE?
I have a similar issue with my A101, although it's not as bad as you guys describe - sometimes the screen just won't register my touch at all, mostly in the edges of the screen - sometimes I think it's the calluses on my fingers from playing guitar, sometimes I think it's the horrible screen they gave us....
My $0.02
So does anyone not have this problem with an A43?
wokker666 said:
Have you guys tried to calibrate the screen through SDE?
I have a similar issue with my A101, although it's not as bad as you guys describe - sometimes the screen just won't register my touch at all, mostly in the edges of the screen - sometimes I think it's the calluses on my fingers from playing guitar, sometimes I think it's the horrible screen they gave us....
My $0.02
Click to expand...
Click to collapse
You might be having better luck because the A101 has a capacitive screen with multi-touch capabilities. They're known to be more reliable than the resistive screens the 43IT's have.
arpruss said:
So does anyone not have this problem with an A43?
Click to expand...
Click to collapse
I have a 43IT, which is why I posted Sorry I wasn't clear. I feel your pain. Also, I suggest using your nail or a stylus, as the pinpoint hardness of either are better than the soft, blob your fingertip makes on the screen sensor array.
ddukki said:
I have a 43IT, which is why I posted Sorry I wasn't clear. I feel your pain. Also, I suggest using your nail or a stylus, as the pinpoint hardness of either are better than the soft, blob your fingertip makes on the screen sensor array.
Click to expand...
Click to collapse
I generally use a stylus. The problem is probably due to the way the plastic digitizer flexes which generates ghost movement data on release. A glass digitizer would be much better.
By the way, it is possible to ameliorate the problem slightly in software. I did that in the myKbd app for PalmOS. Basically, you filter out some very rapid motions. It doesn't affect sensitivity in any significant way.
The reason I'd like to know if everyone has this problem is because I'm going to send my A43 in for warranty repairs, and I am wondering if I should include this problem (in addition to the annoying bright 1/4" area on the screen, and the occasional timeouts when writing to internal flash that result in the device hanging).
So, I have the HTC Desire 610 and i have had it for around 5 months now. I use a body glove case that sometimes comes off in my pocket. However, on the actual phone there is a "dead spot" which is a vertical line about a finger width in width going down the right side of my screen. it does not respond to touch, but acts like i am pressing both sides simultaneously on either side of the column. Also, the rest of the screen is becoming less responsive, requireing multiple taps to select something. Why? How do i fix this?
This is a common problem a lot of people have and the simply don't know why. Under the screen is something called a digitizer, which maps where you fingers are and sends the data to your phone, telling it what to do when you touch it. If it gets damaged, you get things like unresponsive spots on the screen and sometimes the screen will go crazy, and go all over the place. A new digitizer is needed, although there hard to put in and time consuming, so I recommend getting a new screen entirely.
Problems with the touch screen. Apparently 1+ did it as a protection for accidental touches. Along the entire perimeter 2-3 mm from the edge, the screen responds to pressing with a delay of 1-2 seconds! Check and comment please.
OxygenOS v.11.2.3.3
I checked it again, the problem is as in the video above, the delay around the perimeter. But at the same time, there are no delays in the keyboard when typing. Apparently this is a software limitation of some kind from phantom touches, and if an application is open, for example a keyboard, then the touch reacts 100%
Plus I still have my phone in a case,
so I had to get it out of the case to repeat the test as in the video above. There are almost no delays in the case.
Anyone else? Please comment ...
I think I remember having something similar on the 7 Pro. Don't think there was ever a fix for it or anything.
Barmenchik said:
Problems with the touch screen. Apparently 1+ did it as a protection for accidental touches. Along the entire perimeter 2-3 mm from the edge, the screen responds to pressing with a delay of 1-2 seconds! Check and comment please.
OxygenOS v.11.2.3.3
I checked it again, the problem is as in the video above, the delay around the perimeter. But at the same time, there are no delays in the keyboard when typing. Apparently this is a software limitation of some kind from phantom touches, and if an application is open, for example a keyboard, then the touch reacts 100%
Plus I still have my phone in a case,
so I had to get it out of the case to repeat the test as in the video above. There are almost no delays in the case.
Anyone else? Please comment ...
Click to expand...
Click to collapse
Any OTA updates/fix since?