How to Play Android Games with Xbox 360 Controller? I have USB OTG Cable and Wired Xbox 360 Controller not working on Samsung I9100 Galaxy S II, Gigabyte GSmart Roma R2 (Plus Edition) and Samsung I9000 Galaxy S.
I ran into a similar issue........
Not all games are external controller compatible........
At the very least you will need an app similar to sixaxis controller (this app is designed to work with ps3/4 pads) to act as interface between the game, device and pad. And IF you can find a suitable app, you'll need to configure the pad in order for it to work.
I only found out about all of this because I use ePSXe to play PS1 games on my phone......ePSXe allows you to configure a wired OTG pad within it's settings, but you're limited to playing only the games that work with the app (ripped PS1 isos). You'll need to research which 'interface' app will do the job.......i was hard pressed to find one.......
Sent from my rooted, debloated stocKK kn0x0 SM-G900F
I found this.
https://www.youtube.com/watch?v=GLAVV_6mUjs
I install USB/BT Joystick Centre, but Buttons on Xbox 360 Controller not working in Games.
Sandi1987 said:
I found this.
https://www.youtube.com/watch?v=GLAVV_6mUjs
I install USB/BT Joystick Centre, but Buttons on Xbox 360 Controller not working in Games.
Click to expand...
Click to collapse
As I mentioned in my previous reply, you will need to configure (map) the pads buttons within the apps settings......and remember a lot of Android games simply won't accept an external controller.......
Also, don't forget that 'IME' part shown in the video........
Then it's just a case of trying it out with your chosen game to see if it works......
Sent from my rooted, debloated stocKK kn0x0 SM-G900F
Related
so...i read on a bunch of forums that you can just plug and play a 360 controller to the prime's dock via usb to play games
i have tried with shadowgun thd and snesoid....a game and an emulator that i have seen work in other threads and neither acknowledge the controller
snesoid does acknowledge the controller when i try to map the keys and shadowgun just doesn't do anything...
so is there an app i need to make it so that the prime uses the controller? i'd love to get this going..
thanks!
Try out USB/BT joystick center in app store. I've seen others say it works great for mapping controls properly.
From my understanding you can only used the wired xbox controllers. You cannot use the plug and charge remotes.
Thanks...that's what I was using (plug and charge)...I'll look for the guides for using the controller wirelessly
Sent from my Galaxy Nexus using Tapatalk
You can use wireless controllers if you have the wireless receiver for PC/Windows. Plug that into the Prime and it detects wireless 360 controllers fine. Used it on mine with no problems.
I'm investigated .15 firmware and found game controllers and BT devices than TF-201 supports. Here's list of them. Please try them out and post yours here
Apple Wireless Keyboard
Thrustmaster T Mini Wirele
Logitech Dual Action Controller
Logitech G25 Racing Wheel (in Compatibility Mode)
Logitech G25 Racing Wheel (in Native Mode)
Logitech Revue Wireless keyboard
Bluetooth AVRCP
Confirmed by XDA users, and 4pda
OnLive Universal Wireless Controller
XBox 360 USB Controller
iControlPad
Sony Playstation®3 Controller (Dualshock3 from PS3)
Logitech Gamepad F310 (USB).
Logitech Wireless Gamepad F710
Motorola Bluetooth Wireless Keyboard (the one styled after the xoom)
Wii Remote (WiiMote), Nunchuk and Classic Controller. (with Wii Controller IME)
GameStop Wireless Controller
Super Nintendo Controller
post will updates by comming new info
thx 4all
OnLive Universal Wireless Controller works too
Thanks. Perhaps this should be moved to Prime accessories.
Are these controllers supported natively, or is it necessary to use 3rd party apps to connect to them?
jkvato said:
Are these controllers supported natively, or is it necessary to use 3rd party apps to connect to them?
Click to expand...
Click to collapse
I get the list of controllers from .15 firmware, so they supported natively.
But alsow game must fully support games controller.
Some times, not all buttons works. For example only moves or fire and jump button,
etc
I have a wired Xbox 360 controller I used with mine (requires keyboard) and it works incredibly well - if the software supports it. You can navigate the home screens easily, just like the touchpad. But, game support is dependent on the game, not OS. For example, Shine Runners works very well, but Dungeon Defenders doesn't see it.
The nVidia marketplace does a good job of specifying controller support.
Hey I'm a noob. How do I pair the PS3 remote with the Prime?
abahimself said:
Hey I'm a noob. How do I pair the PS3 remote with the Prime?
Click to expand...
Click to collapse
Just plagin PS3 remote to the dock
just tried my iControlPad, works with bluez ime app from market (free) and any ''oid'' emulatore (snesoid, gameboid, etc) have not tried other setups
I meed to get a dock n USB controller or a BT controller. these ps1 games is killing me with touch screen controls. I got final doom, quake 2, R-type Delta, Marvel vs. Capcom, XMen vs. Street Fighter, and Einhander all on my prime. they look n play great with the gpu plugin. now I need a damn controller. Hard to play some of those with touchscreen..lol
which one is the one you can buy at Gamestop that's said to work with prime?
the motorola bluetooth keyboard (the one styled after the xoom) work like a dream, shortcut keys, home/back, its one of the less expensive and well made bluetooth android oriented keyboards, and it has function keys for use with a pc as well, well worth the 45$ i paid for it.
stretchwookie said:
just tried my iControlPad, works with bluez ime app from market (free) and any ''oid'' emulatore (snesoid, gameboid, etc) have not tried other setups
Click to expand...
Click to collapse
Can you give me a link on that controller (iControlPad)?
demandarin there's no answer yet, only testing
Hi,
I tried to connect my WiiMotes.
Even though it suggests the codes 0000 and 1234 ,neither seems to do the trick.
Any help would be appreciated.
I've been using the GameStop branded controller. The system seems to treat it as a bluetooth keyboard. If you launch a notepad type app, you can see what buttons map to which keys. But it seems to work to some degree at least in those apps that nvidia labels as "controller" supported.
I think this is already known but the Sixaxis PS3 controller works without any 3rd party apps.
Just plug it in via USB then turn on bluetooth. From then on it is paired and will work without needing USB.
demandarin said:
I meed to get a dock n USB controller or a BT controller. these ps1 games is killing me with touch screen controls. I got final doom, quake 2, R-type Delta, Marvel vs. Capcom, XMen vs. Street Fighter, and Einhander all on my prime. they look n play great with the gpu plugin. now I need a damn controller. Hard to play some of those with touchscreen..lol
which one is the one you can buy at Gamestop that's said to work with prime?
Click to expand...
Click to collapse
noob question, but what do you mean gpu plugin? are you having to use chainfire 3d? or is it a plugin in the ps1 emulator? i just got my icontrolpad so im interested in getting diablo from ps1 to work on it
dime_veyron said:
Can you give me a link on that controller (iControlPad)?
Click to expand...
Click to collapse
http://www.icontrolpad.com/
i bought it directly through them, dont let the iphone on the main page scare ya, this DEFINITELY works on android, both my prime AND epic 4g touch
malybru said:
Hi,
I tried to connect my WiiMotes.
Even though it suggests the codes 0000 and 1234 ,neither seems to do the trick.
Any help would be appreciated.
Click to expand...
Click to collapse
i use Wii Controller IME and its fantastic
demandarin said:
I meed to get a dock n USB controller or a BT controller. these ps1 games is killing me with touch screen controls. I got final doom, quake 2, R-type Delta, Marvel vs. Capcom, XMen vs. Street Fighter, and Einhander all on my prime. they look n play great with the gpu plugin. now I need a damn controller. Hard to play some of those with touchscreen..lol
which one is the one you can buy at Gamestop that's said to work with prime?
Click to expand...
Click to collapse
Hi, you may buy this one
Anyone able to get the right analog sticks on any brand of controller to properly register with emulators (such as N64oid, SNESoid, Gensoid etc.)?
PS3 won't, either hooked up native or through a third-party such as SixAxis Controller. Therefore I'm wondering if any others will, or if it's an issue that will be present regardless.
HowTo
Here is manual
How to connect and use the Wii Classic Controller Pro + Wiimote(you will need both)
Click to expand...
Click to collapse
buxtahuda said:
Anyone able to get the right analog sticks on any brand of controller to properly register with emulators (such as N64oid, SNESoid, Gensoid etc.)?
PS3 won't, either hooked up native or through a third-party such as SixAxis Controller. Therefore I'm wondering if any others will, or if it's an issue that will be present regardless.
Click to expand...
Click to collapse
N64oid only looks for analog input from the left analog stick and ignores the right analog completely. In order to get the C-buttons working, you can use the Sixaxis app in native gamepad mode, disable the 'Right Analog x-axis' and 'Right Analog y-axis', then use the keyboard emulation to configure the right analog stick as digital button presses (you must also have your IME set to Sixaxis Controller). Most other emulators don't use analog, so you can just use the keyboard emulation exclusively.
Hi, i got and Galaxy S3 with no root.
I bought an fake PS3 controller that works directly with an OTG cable. It work very well and I can directly navigate and use it in games.
But with some games, i need to remap the controller to be able to play (for example the analog sticks). I downloaded USB/BT Joystick Center 6, but it dosent find the controller when i tap "search". I wonder if I need somehow disable the native support for the PS3 controller so the USB/BT app will recognize it? If so, how can i do that?
Rammoshe said:
Hi, i got and Galaxy S3 with no root.
I bought an fake PS3 controller that works directly with an OTG cable. It work very well and I can directly navigate and use it in games.
But with some games, i need to remap the controller to be able to play (for example the analog sticks). I downloaded USB/BT Joystick Center 6, but it dosent find the controller when i tap "search". I wonder if I need somehow disable the native support for the PS3 controller so the USB/BT app will recognize it? If so, how can i do that?
Click to expand...
Click to collapse
The only real games you can play will be native ones and emulators. Remapping the keys isn't going to work unless its an official ps3 controller and your using the six axis app. Then create some touch profiles.
USB joy center is best used for Xbox 360 controllers. I've never had to use anything else with my ps3 controllers besides six axis app.
Also did you buy the app? (I'm not accusing you either) the cracked version won't work properly.
Sent from my GT-I9300 using xda premium
I want to buy a PS3 controller but i want to know if the is any issue or problem that i need to know before i buy it.
Thanks you and sorry for my bad english :B
Sent from my SHIELD Tablet using XDA Free mobile app
I'm not sure how much research you've done on this already, so I'll cover the basics.
You will need to use either a USB OTG to connect the controller with a cable, or be rooted and use the SixAxis app to connect using the PS3 Bluetooth system.
The last time I used the SixAxis app, it wasn't compatible with Android 5.0. Check this out first before purchasing.
jorgemariel said:
I want to buy a PS3 controller but i want to know if the is any issue or problem that i need to know before i buy it.
Thanks you and sorry for my bad english :B
Sent from my SHIELD Tablet using XDA Free mobile app
Click to expand...
Click to collapse
The other guy is right, get an OTG cable if you aren't rooted, or you can go wireless and use the SixAxis app. I use the SixAxis app(I'm rooted) and it works flawlessly on 5.0.1. If you go to Gamepad Settings and pick that you want the PS3 controller to be read as a gamepad, it even works natively with the shield tablet, the buttons are mapped on the controller as they are with the shield controller, and when you launch games, it acts like you have a shield controller setup! You can even do the hold-start-to-open-button-mapping with the PS3 controller!
Thanks you very much! Can you confirm me that all games are compatible? Or there is one that have any problem...?
Sent from my SHIELD Tablet using XDA Free mobile app
jorgemariel said:
Thanks you very much! Can you confirm me that all games are compatible? Or there is one that have any problem...?
Sent from my SHIELD Tablet using XDA Free mobile app
Click to expand...
Click to collapse
All games that are compatible with the shield controller is compatible, because like I said, when you connect the PS3 controller, the system acts like you just connected an nvidia shield controller. For games that don't have gamepad compatibility, you can hold the start button to bring up an on screen button mapper and place buttons and joysticks in the locations you want.
Excelent! I will buy it
Sent from my SHIELD Tablet using XDA Free mobile app
rejectedjs said:
All games that are compatible with the shield controller is compatible, because like I said, when you connect the PS3 controller, the system acts like you just connected an nvidia shield controller. For games that don't have gamepad compatibility, you can hold the start button to bring up an on screen button mapper and place buttons and joysticks in the locations you want.
Click to expand...
Click to collapse
For NVidia Game Mapper, the game you are trying to set up controller maps for must at least have some sort of native controller code implemented.
For example, there are some pinball games that I tried to create a game map for using the Game Mapper. The button assignments would not work. At all.
In some ways, the NVidia Controller is limited by the Nvidia Gamepad Software. Which is a real shame, because the Shield Controller is a great piece of hardware.
If you are using SixAxis, you can set the app to treat all connected PS3 controllers as "Native Controllers".
You can also set up both a touch profile and use the native controller features already included in some games (this is referred to as "hybrid controller mode"). For example, Zen Pinball HD has basic native controller support implemented. But it doesn't have analog plunge for the ball launch. You can set up just the Right Analog Stick as a touch profile, and use the native features to control everything else.
jaredmorgs said:
For NVidia Game Mapper, the game you are trying to set up controller maps for must at least have some sort of native controller code implemented.
For example, there are some pinball games that I tried to create a game map for using the Game Mapper. The button assignments would not work. At all.
In some ways, the NVidia Controller is limited by the Nvidia Gamepad Software. Which is a real shame, because the Shield Controller is a great piece of hardware.
If you are using SixAxis, you can set the app to treat all connected PS3 controllers as "Native Controllers".
You can also set up both a touch profile and use the native controller features already included in some games (this is referred to as "hybrid controller mode"). For example, Zen Pinball HD has basic native controller support implemented. But it doesn't have analog plunge for the ball launch. You can set up just the Right Analog Stick as a touch profile, and use the native features to control everything else.
Click to expand...
Click to collapse
You just repeated everything I said in a long, drawn out format..
rejectedjs said:
For games that don't have gamepad compatibility, you can hold the start button to bring up an on screen button mapper and place buttons and joysticks in the locations you want.
Click to expand...
Click to collapse
The on-screen NVidia Key Mapper, like I specifically pointed out, only works for some games. Which is why...
rejectedjs said:
You just repeated everything I said in a long, drawn out format..
Click to expand...
Click to collapse
...I provided a "long, drawn out" answer. For someone not used to SixAxis and the powerful options it offers for game mapping (hybrid mode/native controller mode) it is long, drawn out info like this that will allow folks to get the most out of the app.
I also don't feel I repeated your information. I added specific information relating to SixAxis features that your two posts didn't contain.
Sorry to bother you guys but I'm looking for a way to use a gamepad without spending 70 euros on Nvidia's right now. So to see if I got what you said before right, if I'm rooted and install SixAxis I can use a PS3 controller as if it were an Nvidia controller with the device?
Just to clarify your understanding... you DO NOT have to root the device. You only need to root it if you want to use it wirelessly. You can use a USB OTG(which is a few $/€ on amazon) without rooting your device and plug it in directly.
Just to clarify your understanding... you DO NOT have to root the device. You only need to root it if you want to use it wirelessly. You can use a USB OTG(which is a few $/€ on amazon) without rooting your device and plug it in directly.
Click to expand...
Click to collapse
I have an OTG cable and I tried plugging it in this way, it works but the mapping isn't very good, for example Mimpy which is also supposed to be Tegra optimized doesn't work, I can go back and forth with the left joystick (or the arrows) but I can't use the other side of the gamepad to jump as I should. If I connect it wirelessly and use SixAxis does the mapping resemble Nvidia's own gamepad or will I still have the same issues?
hi!
I've recently bought the fire HD 6, and was thinking if there are any compatible bluetooth game controllers.
I was thinking to connect it to the TV and use it as a sort of android game console.
Thank you very much
Root and use a PS3 controller is probably your best bet.
The Ouya controller work just fine. Just press the OUYA button (located on the low center in the controller), and when two light start blinking, search as any device at bluethooth menu.
The Ouya controller has an integrated touchpad and can be used as a mouse on your screen. But if you're planning to play a game, remember it's depend if that game has the controller button mapping or you'll need to use Tincore Keymapper to do it manually.
I already rooted my KHD6, so I did the controller test after root, but I'm pretty sure you don't need the root to make it work. I use the same controller on my NON-ROOTED Fire Stick TV and works just fine.
PS4 Controller works like a charm, Played Pokemon On Myboy for a little while, while it was linked to my Chromecast.
I would say a PS4 Controller works out of the box as well, as I wasent rooted at the time.
edoardog said:
hi!
I've recently bought the fire HD 6, and was thinking if there are any compatible bluetooth game controllers.
I was thinking to connect it to the TV and use it as a sort of android game console.
Thank you very much
Click to expand...
Click to collapse
I just bought this controller about week ago and it work with HD6 (I only use GBC,GBA, and Drastic emulators). They work good so far. I haven't test any Android games yet, but I assume it work fine. This controller is awesome. I used with my HD6, phone, and laptop. Recommended!
https://www.amazon.com/GameSir-Blue...e=UTF8&qid=1483042581&sr=8-2&keywords=gamesir