[29-06-15] Mokee Lollipop | mkl-mr1 |64bit | Unofficial - YU Yureka Android Development

Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Working:
Everything
Requirements:
You need to be on official Cyanogen OS 12 or CM12.1 (both 64 bit) before flashing this.
Use TWRP to flash this ROM.
Download:
ROM: Mokee mkl-mr1 64 bit for Yureka
MD5: MD5Sum of Mokee mkl-mr1 64 bit for Yureka
Installation
- Factory Reset
- Flash this ROM
- Wipe Dalvik/Cache
For ScreenShots, please click screenshot tab at top.
XDA:DevDB Information
MokeeLP, ROM for the YU Yureka
Contributors
dumtara
Source Code: https://github.com/mokee
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock 12s (64 bit)
Version Information
Status: Testing
Created 2015-05-08
Last Updated 2015-06-29

thank u
flashing procedure
some screen shot pls

gsunil said:
thank u
flashing procedure
Click to expand...
Click to collapse
Copy ROM zip & MD5Sum zip to sdcatd (root folder).
Boot into TWRP recovery.
Backup OLD ROM.
Wipe / Factory reset.
Install & select zip from external_sd.
wipe cache. & Reboot.
First boot would take 4-5 minutes.
Complete setup wizard & enjoy Mokee ROM.
gsunil said:
some screen shot pls
Click to expand...
Click to collapse
Click Screenshot tab for SS.

hi developer,
please clarify role of " MD5: MD5Sum of Mokee mkl-mr1 64 bit for Yureka" and how to install with rom
best regards

sunilnair007 said:
....please clarify role of " MD5: MD5Sum of Mokee mkl-mr1 64 bit for Yureka"....
Click to expand...
Click to collapse
my understanding is: if the md5 file is available in the same location as the rom file, an md5 checksum verification is carried out by twrp recovery. if there's a mismatch, the rom installation is aborted and the user is safe from bootloop or other catastrophe. read the op and post #3 well.
but, "You need to be on official Cyanogen OS 12 or CM12.1 (both 64 bit) before flashing this." is confusing. can't install this if you're already on some custom rom?

m0han said:
but, "You need to be on official Cyanogen OS 12 or CM12.1 (both 64 bit) before flashing this." is confusing. can't install this if you're already on some custom rom?
Click to expand...
Click to collapse
Its a recommendation. Though I flashed this ROM after namelessrom (64bit) & no issues.
So you can add NamelessRom 64bit to that list.
I have tested with these ROMs only, thats why written that recommendation.
If tester wants, they can test & can flash this ROM over other ROM (64 bit only) & give reviews in this thread. But its risky.

dumtara said:
....I flashed this ROM after namelessrom (64bit) & no issues.....
Click to expand...
Click to collapse
does this rom also have the silly 'call-waiting bug'? like to see some more screenshots, like 'display' and 'navigation bar options'. wanna know the extent of customisation possible compared to resurrection remix rom. :good:

dumtara said:
Its a recommendation. Though I flashed this ROM after namelessrom (64bit) & no issues.
So you can add NamelessRom 64bit to that list.
I have tested with these ROMs only, thats why written that recommendation.
If tester wants, they can test & can flash this ROM over other ROM (64 bit only) & give reviews in this thread. But its risky.
Click to expand...
Click to collapse
just for info : I flashed the ROM on PAC man rom and installation was without any error but while installing any app it take unexpected extra time, which irritates. no such issue on nameless as well PACman rom.
Regards

Users r advised to answer important questions first ....DOES THIS ROM HAS CALL WAITING BUG???
Sent from my AO5510 using XDA Free mobile app

Can I know the major bugs in this ROM #members
[emoji22]

#akadroid said:
Can I know the major bugs in this ROM....
Click to expand...
Click to collapse
the top of the page says "Announcement from dumtara: Test build. Only for tester."
if you're a tester, you wouldn't be bothered to know about bugs; you'd be eager to test and report.

Mokee update is ready, but I have not tested it.
If any one wiling to test it, tell me, I will PM the link to updated ROM.
Based on test report, I will release the ROM.

dumtara said:
Mokee update is ready, but I have not tested it.
If any one wiling to test it, tell me, I will PM the link to updated ROM.
Based on test report, I will release the ROM.
Click to expand...
Click to collapse
I am willing to test it

tazo08 said:
I am willing to test it
Click to expand...
Click to collapse
Thanks buddy. Somehow I able to test it by myself with help from simransingh.
ROM is booting.
I am uploading ROM soon. Browser FC.

Update:
https://www.androidfilehost.com/?fid=23991606952612010

I'm using your latest cm12.1 . whether this rom is best than your cm12.1? also whether notification LED works??

Update 29-06-15
ROM: Mokee Lollipop Unofficial

Related

[ROM][5.1.1_r26][UNOFFICIAL]Temasek cm12.1 build for ms013g[BETA]

Introduction
Temasek is based on Cyanogen Mod rom ,and added more feature than Cyanogen Mod
DISCLAIMER
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, or dead SD cards,
* nuclear war, penguin invasions or that you are getting fired because the alarm app failed.
* before flashing it! YOU are choosing to make these modifications, and
* If you point your finger at me for messing up your device, I will laugh at you. Hard
*/
Samsung Galaxy grand device-specific source code :
Devicefrom aapav01,will change to msm8226-samsung
Kernel: https://github.com/MSM8226-Samsung/android_kernel_samsung_ms013g/tree/cm-12.1
Vendor: github
Not Working:
Same like CM12.1
RILD for a moment,try to use RILD from blisspop or cm12.1
wifi :/
Working:
everything is not listed at not working
Q:is this rom support F2FS
A: of course yes,thanks to msm8226 team
Installation instructions
Should have Kitkat firmware preinstalled
Download ROM and place it at ur internal or external storage
Reboot device into recovery any existing KITKAT supported Recoveries (CWMod 6.0.4.8 + or TWRP 2.7 + or Philz)
Wipe Data, Cache, Dalvik Cache
Format System and Boot
Select Install ROM
Install GAPPS
After successful installation, reboot device
First boot will take 2-3 minutes time
ROM
go here
Gapps
use Open Gapps
How do I logcat?
See this thread how to logcat it's very easy, I suggest to be also newb friendly to use the logcat apps.
http://forum.xda-developers.com/showthread.php?t=1726238
Credits:
Google for Android before Cyanogenmod will slice them off.
The Android community for their contributions
Cyanogenmod for their Branch
@mukulsoni
@aapav01
@Rox
@Rutvikvr
@##W4TCH0UT##
MSM8226 Team
XDA:DevDB Information
Temasek 5.1.1 ms013g, ROM for the Samsung Galaxy Grand 2
Contributors
faizauthar12
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: latest firmware
Based On: Temasek
Version Information
Status: Beta
Beta Release Date: 2015-12-18
Created 2015-12-17
Last Updated 2015-12-26
Specific build info:
Used uber 4.9 both,kernel and rom
Used ArchiDroid optimization
Feel it :v
for screenshot
http://forum.xda-developers.com/devdb/project/?id=13017#screenshots
Changes:
20151217 : Initial Release
20151218 : Try to fix Wifi and some people including me didn't got fixed :v
20151226 : Fixed Wifi
Any screenshots bro
Thanks for your hard work man
Sent from my SM-G910F using Tapatalk
MDabrar said:
Any screenshots bro
Click to expand...
Click to collapse
already at screenshot section ^_^
buggaty said:
Thanks for your hard work man
Sent from my SM-G910F using Tapatalk
Click to expand...
Click to collapse
Great
faizauthar12 said:
Introduction
Temasek is based on Cyanogen Mod rom ,and added more feature than Cyanogen Mod
DISCLAIMER
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, or dead SD cards,
* nuclear war, penguin invasions or that you are getting fired because the alarm app failed.
* before flashing it! YOU are choosing to make these modifications, and
* If you point your finger at me for messing up your device, I will laugh at you. Hard
*/
Samsung Galaxy grand device-specific source code :
Devicefrom aapav01,will change to msm8226-samsung
Kernel: https://github.com/MSM8226-Samsung/android_kernel_samsung_ms013g/tree/cm-12.1
Vendor: github
Not Working:
Same like CM12.1
RILD for a moment,try to use RILD from blisspop or cm12.1
u can tell me
Working:
everything is not listed at not working
Q:is this rom support F2FS
A: of course yes,thanks to msm8226 team
Installation instructions
Should have Kitkat firmware preinstalled
Download ROM and place it at ur internal or external storage
Reboot device into recovery any existing KITKAT supported Recoveries (CWMod 6.0.4.8 + or TWRP 2.7 + or Philz)
Wipe Data, Cache, Dalvik Cache
Format System and Boot
Select Install ROM
Install GAPPS
After successful installation, reboot device
First boot will take 2-3 minutes time
ROM
Android File Host
Gapps
use Open Gapps
How do I logcat?
See this thread how to logcat it's very easy, I suggest to be also newb friendly to use the logcat apps.
http://forum.xda-developers.com/showthread.php?t=1726238
Credits:
Google for Android before Cyanogenmod will slice them off.
The Android community for their contributions
Cyanogenmod for their Branch
@mukulsoni
@aapav01
@Rox
@Rutvikvr
@##W4TCH0UT##
MSM8226 Team
XDA:DevDB Information
Temasek 5.1.1 ms013g, ROM for the Samsung Galaxy Grand 2
Contributors
faizauthar12
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
ROM Firmware Required: latest firmware
Based On: Temasek
Version Information
Status: Beta
Beta Release Date: 2015-12-17
Created 2015-12-17
Last Updated 2015-12-17
Click to expand...
Click to collapse
screenshots bro
faizauthar12 said:
Specific build info:
Used uber 4.9 both,kernel and rom
Used ArchiDroid optimization
Feel it :v
Click to expand...
Click to collapse
What is Uber?
Wifi not work.
faizauthar12 said:
already at screenshot section ^_^
Click to expand...
Click to collapse
Mate thanx for ur hard work.....
Btw just a suggestn.......plz add the screenshot link to the screenshot section in the op .....for those who are using tapatalk or xda or any such app to acces this forum....they cant see this..........have to go to browser and then screenshot.....but if u add link then they will directly be redirected to that section.....
I hope u will not take this -vely....
Once again well done mate for this great job...keep going
Great man but I cant understand this line RILD for a moment,try to use RILD from blisspop or cm12.1
And are change data from. Sim. 1 to sim. 2 work ?
Good work
I just wonder if this rom support navigation bar modding like adding new buttons ...
Sent from my SM-G7102 using Tapatalk
powerp said:
Wifi not work.
Click to expand...
Click to collapse
added to not working list
riasat.sheikh said:
Mate thanx for ur hard work.....
Btw just a suggestn.......plz add the screenshot link to the screenshot section in the op .....for those who are using tapatalk or xda or any such app to acces this forum....they cant see this..........have to go to browser and then screenshot.....but if u add link then they will directly be redirected to that section.....
I hope u will not take this -vely....
Once again well done mate for this great job...keep going
Click to expand...
Click to collapse
alright,i will post the screenshots at 2nd post
medozse7s said:
Great man but I cant understand this line RILD for a moment,try to use RILD from blisspop or cm12.1
And are change data from. Sim. 1 to sim. 2 work ?
Click to expand...
Click to collapse
not stable ,don't use as daily driver
salimtn said:
Good work
I just wonder if this rom support navigation bar modding like adding new buttons ...
Sent from my SM-G7102 using Tapatalk
Click to expand...
Click to collapse
,well i never tried navbar,maybe u can explore at temasek spare part section
all feature request goes to Temasek
Anzd said:
What is Uber?
Click to expand...
Click to collapse
u can read it here http://forum.xda-developers.com/chef-central/android/guide-switching-to-custom-toolchain-t2927662
========================================================
alright,update
need someone to test the new build
my grand 2 is my father phone ,he at office right now ._.
test it,maybe it fix wifi,sim and offline charging
TEST TEST TEST :v
Android File Host
sorry, will continue later .....
Downloading now!
Will try tonight and review tomorrow.
#flashaholic
[baseband=h3,ext4,on rr5.5.9]
This rom is great but Wifi and Sim card still not detected on the latest build.
I got WiFi working :good:
But couldn't test data correctly
Ie. Roms updated after release of Blisspop_r24 has problem detecting sim ie. Sometimes after restart it will show no sim card.
https://www.androidfilehost.com/?w=files&flid=46252
Puft,mysterious link :v
still no answer for SIM :/
even Temasek is based on CyanogenMod ,and always follow the latest commit each of the repo
screenshot attached at attachment section
"have u ever heard multi rom?"
faizauthar12 said:
https://www.androidfilehost.com/?w=files&flid=46252
Puft,mysterious link :v
still no answer for SIM :/
even Temasek is based on CyanogenMod ,and always follow the latest commit each of the repo
screenshot attached at attachment section
"have u ever heard multi rom?"
Click to expand...
Click to collapse
Multi ROM coming for Grand 2? R u building it bro?
let's try :v :v

[16/05][6.0.1_r43] Temasek's UNOFFICIAL BUILD v8.3(Based on CM13)

Temasek's UNOFFICIAL CM13 BUILDS
This is the UNOFFICIAL Build of Temasek based on CM13.​
DISCLAIMER
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
**Note**
YOU NEED TO HAVE AN UNLOCKED BOOTLOADER TO FLASH THIS ROM!!
Now Welcome To Download Section
Here is The Link: https://www.androidfilehost.com/?w=files&flid=53999
Now to the INSTALLATION part
**The lastest version TWRP (3.0) is recommended or Philz CWM.
1. Download the ROM.
2. Download the appropriate GApps. (Personally I use open GApps)
3. Back up any and all important data.
5. WIPE DALVIK/CACHE/DATA/FACTORY RESET.
6. WIPE SYSTEM.
7. Flash the ROM in recovery.8. Flash the GApps.
9. WIPE DALVIK/CACHE (for good measure).
10. Reboot your device.
11. And Enjoy/
CHANGELOG​
Source Code: https://github.com/temasek
Kernel Source: https://github.com/CyanogenMod/android_kernel_sony_msm
Device Tree: https://github.com/CyanogenMod/android_device_sony_togari/tree/cm-13.0
CREDITS
@temasek
@CyanogenMod​
** I will try to provide updates as soon as new build comes. And as I am just 15 I need to concentrate on my school also.**​​** I don't own this device so PLEASE report issues and bugs so that i can fix them **​​
Please THANK if you like this ROM and my WORK.​
XDA:DevDB Information
Temasek's UNOFFICIAL BUILD - Togari, ROM for the Sony Xperia Z Ultra
Contributors
markakash
Source Code: https://github.com/temasek
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Unlocked Bootloader
Based On: CyanogenMod
Version Information
Status: Testing
Created 2016-04-11
Last Updated 2016-05-15​
Reserved
Systemui fc
Keyvannn said:
Systemui fc
Click to expand...
Click to collapse
Everything works perfect????
drmagesh7 said:
Everything works perfect????
Click to expand...
Click to collapse
i tried to test the rom , but i have been got a systemui fc error continuously
Keyvannn said:
i tried to test the rom , but i have been got a systemui fc error continuously
Click to expand...
Click to collapse
@Keyvannn dont worry buddy I will soon upload a new build with system.ui fc fixed and will also try to merge the new Binaries v4 released by Sony on April 6. It has camera, connectvity and security improvements.
markakash said:
@Keyvannn dont worry buddy I will soon upload a new build with system.ui fc fixed and will also try to merge the new Binaries v4 released by Sony on April 6. It has camera, connectvity and security improvements.
Click to expand...
Click to collapse
Am waiting bro ....:good::highfive:
#NEW UPDATE IS AVAILABLE#
- Temasek Updated to v 6.6
Here is Download link: https://www.androidfilehost.com/?fid=24499762636000068
Enjoy
Regards,
Akash
Any bugs?
Does camera work?
markakash said:
#NEW UPDATE IS AVAILABLE#
- Temasek Updated to v 6.6
Here is Download link: https://www.androidfilehost.com/?fid=24499762636000068
Enjoy
Regards,
Akash
Click to expand...
Click to collapse
thanks bro..i will test tonight..
thanks for your hard work
c6802
clean flash with twrp 3.0.2
"systemui hast stopped "
Keyvannn said:
c6802
clean flash with twrp 3.0.2
"systemui hast stopped "
Click to expand...
Click to collapse
@Keyvannn did u try just clean flashing the rom without gapps? If it still gives 'fc' then cand u take a logcat of ur error and send it so that i can look where the error is.
markakash said:
@Keyvannn did u try just clean flashing the rom without gapps? If it still gives 'fc' then cand u take a logcat of ur error and send it so that i can look where the error is.
Click to expand...
Click to collapse
yes I've tried with/whithout gapps but the result was the same.
ok bro.. how can i take a logcat ?
sorry for my bad english
Awesome. I loved themaseks rom on my old sgs3. Never thought I would see it on my Ultra
Keyvannn said:
c6802
clean flash with twrp 3.0.2
"systemui hast stopped "
Click to expand...
Click to collapse
----
same here
clean flash with twrp 3.0.2 (phone c6833)
systemui has stopped
Keyvannn said:
c6802
clean flash with twrp 3.0.2
"systemui hast stopped "
Click to expand...
Click to collapse
shehzadshaukat said:
----
same here
clean flash with twrp 3.0.2 (phone c6833)
systemui has stopped
Click to expand...
Click to collapse
If you could provide logcat for the developer it would be very helpful for the developer to fix it.
Is this stable z ultra c6802
Hey Everyone, its been a while i uploaded a new build.
So here it is temasek 7.9 for Togari!
Changelog:
- Aosp tree used.
- r43 merged
- v5 sony binaries merged.
- CM source updated
Here is download link: https://www.androidfilehost.com/?fid=24533103863137682
Do let me know if u have any issues or abt how the performance is n camera also.
As always,
Regards,
Akash
markakash said:
Hey Everyone, its been a while i uploaded a new build.
So here it is temasek 7.9 for Togari!
Changelog:
- Aosp tree used.
- r43 merged
- v5 sony binaries merged.
- CM source updated
Here is download link: https://www.androidfilehost.com/?fid=24533103863137682
Do let me know if u have any issues or abt how the performance is n camera also.
As always,
Regards,
Akash
Click to expand...
Click to collapse
Thenk you for your builds. I wanted to ask you if you could make build for Exodus Rom for togari?
fnldstntn said:
Thenk you for your builds. I wanted to ask you if you could make build for Exodus Rom for togari?
Click to expand...
Click to collapse
@fnldstntn i would like to bring many roms to Togari but i want someone who can test my builds as i dont own Z ultra only Z1.
If someone agrees to test my builds i may build other roms aswell.

[NAMELESS][MM]

What is NamelessRom?
Simple - NamelessRom is opportunity.
An opportunity to have a voice to the development team of the after-market firmware that you run on your device.
The main goal of NamelessRom is to provide quality development for android devices, phones and tablets alike.
NamelessRom developers are available nearly 24/7 and respond to bug reports and feature requests almost instantly.
This availability will allow you, the end-user, to have direct input into exactly what features and functions are included on the firmware that YOU run.
NamelessRom maintains features and functions of several well-known open-source, AOSP-based ROMs, as well as many features of our own.
See the screenshots in the 3rd post, and visit our website for more detailed information.
NamelessRom = endless possibilities. Unless you have an iPhone, then you're out of luck.
DISCLAIMER
#include <std_disclaimer.h>
/**
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
**/
Copy the Code
Installation Instructions
PLEASE HAVE A LOOK AT IMPORTANT NOTICES BELOW FIRST!
(Optional) Unifying
Please look at the PRE Installation above
FROM OTHER ROMS OR FROM OLDER VERSIONS (eg. 5.x to 6.x)
Factory Reset/Wipe Data
Format System
Format Dalvik Cache
Install Rom
(Optional) If you install GAPPS, do it IMMEDIATLY after you have flashed the ROM.
Reboot
Profit
This should be always working, if you have your own procedure, it is fine as well.
These steps are just recommended, if you run into any troubles
Update From Nameless Rom To A Newer Release (Nightlies etc)
Download the zip, flash it and wipe the dalvik cache.
You will NOT need to wipe anything else.
DOWNLOADS
https://drive.google.com/open?id=0B9oajYklNKkjVDNpMmd6MWtFMTg
BUGS
-You tell me
Kernel Source- https://github.com/kumajaya/android_kernel_cyanogen_msm8916/tree/cm-13.0-amss-2.1-wt88047
Credits- Nameless team,CM, @ketut.kumajaya,everyone who helped
XDA:DevDB Information
[NAMELESS][MM][UNOFFICIAL][WT88047], ROM for the Xiaomi Redmi 2
Contributors
arpit_deshpande
Source Code: https://github.com/NamelessRom
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP
Based On: CyanogenMod
Version Information
Status: Stable
Created 2016-04-20
Last Updated 2016-04-20
Post some screenies...
Waiting for screenshots.
Downloading now...will post some screenshots , Again thanks to u mr. @arpit_deshpande
Screenshots...
Can Write Eksternal sd ?
unfat said:
Can Write Eksternal sd ?
Click to expand...
Click to collapse
yes
Great rom. Haven't experienced single fc till now. smooth and stable
Every single ROM with MM is looking the same. I don't know, why you still ask for screenshoots
Does it work well with 2014017 variant .
mario_R said:
Every single ROM with MM is looking the same. I don't know, why you still ask for screenshoots
Click to expand...
Click to collapse
Because some rom's gives additional features too ,like in this rom data traffic view is an additional feature with the stock CM rom. People dont want to see the UI of the rom they want to see the extra features .
They want a reason to differentiate the roms, a reason to change the current installed rom.
sandeep_7 said:
Because some rom's gives additional features too ,like in this rom data traffic view is an additional feature with the stock CM rom. People dont want to see the UI of the rom they want to see the extra features .
They want a reason to differentiate the roms, a reason to change the current installed rom.
Click to expand...
Click to collapse
yes i'm agree with you bro....important point to show screenshoots is for extra feature like data speed connection status bar, more option on reboot mode....Nice follow bro....
@arpit_deshpand i like your rom....i use 20160420 nameless rom....i have'nt no issue till now,i had been use 7 day with your rom
Nice rom bro....go better and keep developing.....:good::good:
And you really should add the name of the device in the title of the thread.
sajed98 said:
And you really should add the name of the device in the title of the thread.
Click to expand...
Click to collapse
Isn't this the Redmi 2 thread?
arpit_deshpande said:
Isn't this the Redmi 2 thread?
Click to expand...
Click to collapse
Yes. But it was a suggestion.
Because I have added it to my subscribed posts. Then it doesn't show if it's for redmi 2 or what. I also have a Mi 3. I got confused.
sajed98 said:
Yes. But it was a suggestion.
Because I have added it to my subscribed posts. Then it doesn't show if it's for redmi 2 or what. I also have a Mi 3. I got confused.
Click to expand...
Click to collapse
No worries I'll edit it when I get some time
Great, stable rom, without fc, and bugs. Thanks for Your work.
javdyaba said:
Great, stable rom, without fc, and bugs. Thanks for Your work.
Click to expand...
Click to collapse
Can you give upload the file? Link is not working..

[ROM] [7.1.2] ResurrectionPixel [OFFICIAL] [31.05.2017]

ResurrectionPixel​OFFICIAL ROM DEVELOPED BY RBNLA & LUCASTANCIU​
Code:
/*
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Informations:
ResurrectionPixel is based on Resurrection Remix and is supposed to bring the full Google Pixel Experience to your Device. Resurrection Remix is a free, community built, aftermarket firmware distribution of Android, which is designed to increase performance and reliability over stock Android for your device. More Informations on Telegramm.
Support:
Samsung Galaxy S6edge+ [F/C/7]
Samsung Galaxy Note5 [G/C/T]
Click to expand...
Click to collapse
Features:
Pixel: Launcher, Wallpaper, Dialer, Messenger, Contacts, Gmail, Calender, Camera, Settings, Sound, Bootanimation (and a lot more...)
Rooted with Magisk.
Security Patch Level: 05.05.2017.
Resurrection Remix Base / Android 7.1.2
All Resurrection Features.
Substratum support.
A lot that i dont remember...
Click to expand...
Click to collapse
Instruction:
It is recommended to install the ROM always clean and not dirty. If you find a bug/Issue, please tell if you have flash clean or dirty.
Flash ROM
Flash Update
Flash GApps
Boot your Device.
Go back to TWRP and flash your Kernel.
Please check THIS POST for more Informations!​
Click to expand...
Click to collapse
Issue/bug Report:
If you find an Issue/bug, please name your device you are using in your report. That helps us alot to fix your problems.
Issues/bugs:
you tell..
Click to expand...
Click to collapse
Downloads:
Please remember to select the correct kernel in the 2nd post. The Changelog you can fine in the 3rd post of this Thread. Please do not ETA for Updates. Update need to flash dirty over the latest ROM.
ROM
ResurrectionPixel 14.2-20170520 [G928F/G/C/7 I N920C/G]
ResurrectionPixel 14.2-20170520 [G928T I N920T]
UPDATE
ResurrectionPixel 14.2-20170520 -> 14.2-20170531 [G928F/G/C/7 I N920C/G]
ResurrectionPixel 14.2-20170520 -> 14.2-20170531 [G928T I N920T]
Click to expand...
Click to collapse
XDA: Information
ResurrectionPixel 14.1 , ROM for the Samsung Galaxy Note 5 & Samsung Galaxy S6edge+
Contributors & Developers
lucastanciu & rbnla
Special Thanks to the Tester's..
@neondragon1909
@LeoDS
@bill_kevin
@hamza steif
Telegram: https://t.me/joinchat/AAAAAEJyrL36j8D7qfgQPg
Resurrection Remix: https://forum.xda-developers.com/s6-edge-plus/orig-development/rom-resurrection-remix-t3605276
ROM OS Version: 7.x Nougat
ROM Kernel: android_kernel_samsung_zenlte
Version Information
Status: Stable
Created 2017-05-17
Last Updated 31.05.2017
Pixel+ [ N920T / N920C ]
Pixel+​OFFICIAL ADDON DEVELOPED BY RBNLA​
Many N920C and N920T users have many problems with the base of my ROM.
The base of RaymanFX, however, seems to work without bugs,
Therefore I would advise you to use its LineageOS ROM
and to flash the new Addon Pixel + in hindsight.
Pixel + brings the full Pixel Experience to this ROM.
Please do not forget that this was a lot of work.
So I would be glad if you would hit Thanks for the work!
Also hit thanks for RaymanFX as it is his lineageOS build.
Pixel + is an alternative as long as there is no well functioning C/T base.​
Instruction [N920T]:
Please follow the instructions carefully. Errors can lead to problems! If you want to report an error, please name your device.
Flash this LineageOS build.
Flash Pixel+ Addon.
Flash GApps
Reboot your device.. done!
Click to expand...
Click to collapse
Instruction [N920C]:
Please follow the instructions carefully. Errors can lead to problems! If you want to report an error, please name your device.
Flash this LineageOS build.
Flash Pixel+ Addon.
Flash GApps
Reboot your device.. done!
Click to expand...
Click to collapse
( The orange texts are also the download links. )​
Some Pixel Extras...
Live Wallpaper Force Close FIX
Substratum Theme Engine
Pixel UI Substratum Theme
XDA: Information
Pixel+ 2.0 , Addon for the Samsung Galaxy Note 5
Contributors & Developers
@RaymanFX, @rbnla
Telegram: https://t.me/joinchat/AAAAAEJyrL36j8D7qfgQPg
RaymanFX Thread: https://forum.xda-developers.com/note5/orig-development/rom-lineageos-14-1-t3572047
Version Information
Status: Testing
Last Update: 08.06.2017
Changelog & Kernels..
Kernels
How to flash .img Files in TWRP?​​Select img File in TWRP/Install. Now you can install .img files.​
Samsung Galaxy Note 5​
1) Flash the ROM and your GApps. Boot your device and after it boot's, go back to TWRP.
2) Flash this Kernel [boot1.img] with TWRP and reboot.
Samsung Galaxy S6 Edge Plus​
1) Flash the ROM and your GApps. Boot your device and after the boot, go back to TWRP.
2) Flash this Kernel [muffykeys.img] with TWRP and reboot.
__________________________________________________________________________________________​
Changelog
DATE I VERSION
13.07 I END OF DEVELOPMENT
31.05 I 14.2-20170531 ( Only Update - NO ROM! Flash it dirty over RP-20170520! )
Updated to latest Pixel Experience.
Updated Resurrection Pixel Tweaks.
Try to fix frezze error after calling.
Better Battery life. ( needs to be testet )
28.05 I 14.2-20170520
Added TMO ( G928T / N920T ) Build
It includes all changes to the version 14.2-20170520
20.05 I 14.2-20170520
Based on latest Ressurection Remix Build.
Fixed Bootloop.
Fixed Fingerprint not working.
Fixed root issue.
Fast reboot & boot tweak added.
Better ram managmant tweak added.
logcat disabled.
19.05 I 14.2-20170519
Intl. Release
Thx i will try as soon as posible
bill_kevin said:
Thx i will try as soon as posible
Click to expand...
Click to collapse
thank you
Awesome!!!! Can't wait to try it
by any chance would you happen to know how stability is looking like so far?
lumikin said:
by any chance would you happen to know how stability is looking like so far?
Click to expand...
Click to collapse
It is stable as well. If you want to be an tester please PM me on Telegramm!
Wow cnt wait...!!!! Thnx so much!!
Would love to test. lmk. Thanks!
Thanks for your feedback
Thread will be locked shortly. Xda does not allow placeholders. Hope you get something up before they lock it.
Does this ROM work on 9208?
rbnla said:
It is stable as well. If you want to be an tester please PM me on Telegramm!
Click to expand...
Click to collapse
Sure, I can test. What's your id in telegram?
cidxtc said:
Thread will be locked shortly. Xda does not allow placeholders. Hope you get something up before they lock it.
Click to expand...
Click to collapse
This thread has a function and will be provided soon with the first build.
Kernels are also available
Post poste no pointless stuff like ** The thread will be locked ** in my thread. I thank!
lumikin said:
Sure, I can test. What's your id in telegram?
Click to expand...
Click to collapse
Go into Telegramm Group and PM rbnla
This is my experience so far: I installed this on my N920W8 (obviously Canadian variant, on Rogers) and following the instructions the ROM booted up and at first glance it looks great. I was able to phone my cell, but couldn't hear anything in or out. Then it showed that the device is not rooted. I rebooted in recovery, installed "SR3-SuperSU-v2.79-SR3-20170114223742.zip", wiped Dalvik/Cache, now it's stuck in the animation boot thingy. I'm tempted to try again, this time try to root with Magisk.
++++++EDIT+++++
I tried every each way. I can't get it rooted, nor can I make voice work. Too bad. Not seeing TW was a joy.
pitaru said:
This is my experience so far: I installed this on my N920W8 (obviously Canadian variant, on Rogers) and following the instructions the ROM booted up and at first glance it looks great. I was able to phone my cell, but couldn't hear anything in or out. Then it showed that the device is not rooted. I rebooted in recovery, installed "SR3-SuperSU-v2.79-SR3-20170114223742.zip", wiped Dalvik/Cache, now it's stuck in the animation boot thingy. I'm tempted to try again, this time try to root with Magisk.
++++++EDIT+++++
I tried every each way. I can't get it rooted, nor can I make voice work. Too bad. Not seeing TW was a joy.
Click to expand...
Click to collapse
The ROM is not only yet.. How you can install an not released rom?
Pardon me? I installed this: RR-N-v5.8.3-20170511-zenltexx-Unofficial.zip
++++EDIT++++
I installed from here: https://forum.xda-developers.com/s6-edge-plus/orig-development/rom-resurrection-remix-t3605276
Please release me from my darkness.
+++++EDIT2++++
I get it now. I installed a different ROM, the one your ROM will be based on. Going back to TowchWiz until you release your ROM.
where is the rom download link?

[ROM][PIE/9.0.0][UNOFFICIAL]Resurrection Remix v7.0.2 [A6020]

Resurrection Remix P
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Here is Resurrection Remix Pie based compiled using LineageOS sources from @YashGarg10 and @Harry8242. All the credits goes to these awesome developers. And of course, to the previous ones who have done every work on this device.
Current Status: Testing
What's Working/Not Working
My A6020a46 broke down completely a few months ago. I gave this ROM to my friend who has the exact same device so I wasn't able to test it completely.
I want you to report the bugs here. I will add them and try to fix them as soon as possible.
Not working
Camera
FM Radio
Sources
ROM: https://github.com/ResurrectionRemix
Device: https://github.com/wowufoundme/pie_device_lenovo_A6020
Kernel: https://github.com/wowufoundme/android_kernel_lenovo_msm8916
Vendor: https://github.com/wowufoundme/pie_vendor_lenovo_A6020
Downloads
TWRP 3.3.1.0 - A6020 (Flash in fastboot mode using fastboot flash recovery twrp-3.3.1-0-A6020.img)
Latest Build - AFH
OpenGApps
Installation (Clean Flah/If coming fro any other ROM)
1. Make sure you have the latest TWRP from Shreps (3.3.1.0).
2. Reboot into recovery mode
3. Select Wipe > Advanced Wipe
4. Tick mark Dalvik/ART Cache, Cache, System and Data
5. Swipe to wipe.
6. Select Install and select ROM zip
7. After flashing succeeds, wipe cache/dalvik cache, then Reboot system
8. After reboot completes, boot again into recovery and flash GApps package
9. Flash Magisk for root(optional) then reboot.
Installation (Dirty Flash)
1. Reboot into recovery mode
2. Select Install and select ROM zip
3. Flash TWRP zip but don't flash GApps.
4. After flashing succeeds, then Reboot system
Important Information
The ROM is currently under testing stage. I may not be able to provide changes very fast due to my placements but will try to release ASAP.
Screenshots
--See attachments--
Credits
Resurrection Remix Team
Lineage OS Team
YashGarg10, Harry8242, Shreps, scritch007 and all the awesome developers behind it.​
Thanks for the rom ?
Why do we need to flash gapps after first boot? Can we flash with the rom?
hayalmalikanesi said:
Thanks for the rom ?
Why do we need to flash gapps after first boot? Can we flash with the rom?
Click to expand...
Click to collapse
You can! Just to be on a safe side. Let the ROM get into your phone.
sorry, but i cant find (latest TWRP from Shreps (3.3.1.0) ) could u provide a link for us?
thanks.
Leozaors said:
sorry, but i cant find (latest TWRP from Shreps (3.3.1.0) ) could u provide a link for us?
thanks.
Click to expand...
Click to collapse
--Updated in the OP--
hi so glad to finally see a different version of android pie.but fm radio does not work, but always 100.00 channel does not have a fixed voice, but even though I did not see a problem Start TV broadcasting may be problematic
bro, no link, update pls. wanna test very much
Camera dont work
raynofff said:
bro, no link, update pls. wanna test very much
Click to expand...
Click to collapse
Link not work!
raynofff said:
bro, no link, update pls. wanna test very much
Click to expand...
Click to collapse
--Link Updated--
hiltonjr.lucas said:
Link not work!
Click to expand...
Click to collapse
^^
bro, at first sight, rom is smooth, fast and may be (at first sight) one of the best 9 roms i tried, device A6020a40.
one thing: quick unlock when correct pin is entered- i can't find where to activate, bcoz fingerprint unlock is useless in this device, face unlock is useless 4 me. this are only bugs i mentioned until now... Please make keylock work correct, or tell how to change it. (sorry 4 my bad english, it is not my native).
Thnks 4 ur work, looking forward for new in future. big respect.
---------- Post added at 09:45 AM ---------- Previous post was at 09:43 AM ----------
raynofff said:
bro, at first sight, rom is smooth, fast and may be (at first sight) one of the best 9 roms i tried, device A6020a40.
one thing: quick unlock when correct pin is entered- i can't find where to activate, bcoz fingerprint unlock is useless in this device, face unlock is useless 4 me. this are only bugs i mentioned until now... Please make keylock work correct, or tell how to change it. (sorry 4 my bad english, it is not my native).
Thnks 4 ur work, looking forward for new in future. big respect.
Click to expand...
Click to collapse
sorry, i forget- camera and sound - ewerything works good
are this smooth for gaming?
muhtarialdi said:
are this smooth for gaming?
Click to expand...
Click to collapse
This device itself ain't that good for gaming. Do yourself a favor and buy an OP
shubhkirtisharma said:
This device itself ain't that good for gaming. Do yourself a favor and buy an OP
Click to expand...
Click to collapse
i use mokee rom 7.1.2 now in my lenovo vibe k5. it was very smooth for gaming better than the other rom (include 8.1 and 9.0).
my question is, are this rom better than the other rom oreo and pie?
thank you
shubhkirtisharma said:
This device itself ain't that good for gaming. Do yourself a favor and buy an OP
Click to expand...
Click to collapse
Yes k5 plus isn't that much good but game like pubg u can play it smooth on some roms and lag on other
muhtarialdi said:
i use mokee rom 7.1.2 now in my lenovo vibe k5. it was very smooth for gaming better than the other rom (include 8.1 and 9.0).
my question is, are this rom better than the other rom oreo and pie?
thank you
Click to expand...
Click to collapse
try it and tell us
Thank you for this Rom, everything is working fine i havent found bugs yet except that the battery drains a little fast
shubhkirtisharma said:
--Link Updated--
Click to expand...
Click to collapse
Thanks for providing new Pie Rom for Lenovo A6020. Rom is fine and smooth. Since you are taking care of many wonderful Roms, I just want to know (Request), whether we can expect Pixel Experience Pie Rom for Lenovo A6020. Thank you once again for the efforts and support for this device.
youkrish said:
Thanks for providing new Pie Rom for Lenovo A6020. Rom is fine and smooth. Since you are taking care of many wonderful Roms, I just want to know (Request), whether we can expect Pixel Experience Pie Rom for Lenovo A6020. Thank you once again for the efforts and support for this device.
Click to expand...
Click to collapse
Pixel Experience Alpha build is there for A6020.

Categories

Resources