Post your current phone setup - G2 General

One of the things that I think is the most challenging about customizing your phone is knowing how to set it up. I believe that a good way to learn is by knowing what others are using. Please use the same formatting to make it as user friendly as possible.
Model: d800 (AT&T)
File system: Ext4
Bootloader: Jelly Bean
Baseband/modem: 10O
ROM: Cyanogenmod 12 [Lollipop 5.0.2] (latest build)
Kernel: Render R11
Gapps: Package 20141212
Camera: Main Camera [Older modded LG camera] *Note: I flashed the file and did not install the program. Works much better in my opinion. My backup camera is the Motorola Camera. All options work for it.
Theme: Material Glass
Icons Package: Whicons
Add-ons: LG G3 Quick Remote
Tweaks: Fix for battery drain due to wakelock issues with Google Services - Here
Issues: Main Camera - Most of the settings work; however, there are a couple options that will cause the app to FC. There is one setting that causes the app to FC and then FC every time you try to open it. You can fix this issue by going to App Info for the Camera app and clicking Clear Data. Also, the front facing camera does not work with the app...I never use it so it isn't a problem for me. Be sure to change the settings to get the highest quality pictures.
Suggestions: I'm not sure if it is necessary, but I always flash SuperSu as well. When I dirty flash, I flash all zip files again (e.g., camera, gapps, etc.)

Related

[ROM][UNOFFICIAL][KitKat 4.4.4][SM-T530NU] CyanogenMod 11 [04/26/2015]

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KK), which is designed to increase performance and reliability over stock Android for your device.
------------THIS IS AN UNOFFICIAL UNSUPPORTED BUILD-----------
This is my attempt at porting CyanogenMod 11 to the Galaxy Tab 4 10.1. I use a SM-T530NU, so that is the only device I have tested.
Any other device variations have not been tested and are at your own risk. I will not be able to support other variations as I don't own them for testing.
Special thanks to MetaIIica - I have been using his Alpha build of PAC-ROM KitKat since December. I studied the code for that, along with stock and some other ROMs before starting this port. This is my first time doing any work with Android, so I'm not sure if I'm technically doing things correctly or not.
I know CyanogenMod 12 is under development already, but I have decided to do a CM11 based build in hopes of a making a stable daily driver offering. I have fixed many of the issues present that were present in the PAC-ROM build. They can probably be backported to PAC-ROM easily if its built with my tree, but I prefer the plain CM-based offering myself.
You may get the source of my changes for this ROM on my github. If you'd like to help and submit a patch, feel free to open a pull request. You will of course be credited accordingly.
See below for instructions, what's working, and issues I fixed over the PAC-ROM Alpha.
For any bug reports or feature requests, please use the appropriate tabs at the top of the thread. Please include as much information as possible and if possible a logcat or other debug information in the case of bugs. Requests for supporting other device variations will not be honored - sorry,
Feedback and constructive criticism is always appreciated. I hope you enjoy using the ROM; if you use the ROM, please consider leaving a thanks, rating, and/or review
CURRENT VERSION:
DOWNLOAD LINK - 04/26/2015
OLD VERSIONS:
DOWNLOAD LINK - 04/20/2015
DOWNLOAD LINK - 04/19/2015
DOWNLOAD LINK - 04/07/2015
DOWNLOAD LINK - 04/05/2015
DOWNLOAD LINK - 04/04/2015
DOWNLOAD LINK - 04/03/2015
DOWNLOAD LINK - 03/29/2015
DOWNLOAD LINK - 03/24/2015
DOWNLOAD LINK - 03/23/2015
DOWNLOAD LINK - 03/22/2015
INSTRUCTIONS
- Install PhilZ Touch Recovery (recommended)
- Copy CM11 & GAPPS (Optional) ZIPs to your SDCard
- Boot into Recovery
- Do "Clean to Install a New ROM" (FULL WIPE REQUIRED INCLUDING SYSTEM, NOT JUST DATA/CACHE - even if coming from another CM-based ROM, as my device tree is different)
- Flash CM11 ZIP
- Flash GApps zip from SDCard
- Reboot
UPGRADING
-In general, you should be able to just flash over the previous build, but if you encounter any weird issues please clean using the steps above
Working that I've tested:
Audio: Speakers, Headphones, Bluetooth
Bluetooth
CIFS/NFS (Network File Systems - see notes below)
Front Camera
GPS
IR Blaster [SM-T530NU Only]
Magnetic Cover Sleep/Wake
MTP
Rear Camera
USB OTG
Video (w/ Hardware Decoding)
WiFi (2.4ghz & 5ghz)
NOTE ON BUTTONS: This ROM is configured to use the hardware buttons-- so you won't see the software buttons taking up space at the bottom of the screen, as they are disabled. This is not a bug. Use the hardware buttons, as they are the same. If you really want the software buttons for some reason, edit /system/build.prop, change qemu.hw.mainkeys to 0, save, and reboot. If you map the menu button to a long press of another button, some apps such as TitaniumBackup will count this as a hardware key and hide their soft menu button - but only after a reboot.
NOTE ON CIFS/NFS: Many of the mounting utilities on the play store are outdated and broken due to changes in the linux kernel. For best luck, mount using the command line. For CIFS, you can tweak CIFSManager into working - see this thread
CHANGELOG:
[04/26/2015]
-Fix reading MAC address from EFS
-Fix suspending charging while the device is off (special thanks to @sub77 for pointing out the right config option)
[04/20/2015]
-Enable physical keyboard menu for use with BT/USB keyboards. Auto hides soft keyboard & allows selection of layout.
[04/19/2015]
-Add support for magnetic cover sleep/wake
[04/07/2015]
-Roll back to using the Non-CAF Display HAL Fixes SurfaceFlinger constantly eating 100% CPU
[04/05/2015]
-Fix issues with reconnecting Bluetooth Devices after a reboot (if upgrading, break pairing and re-pair all devices)
-Fix mounting /efs
-Fix persistant Bluetooth MAC Address
[04/04/2015]
-Fix issues with detecting whether or not the device has a hardware menu button.
[04/03/2015]
-Fix the Time Service, allowing Date & Time to persist during a reboot without a wifi connection. Special Thanks: sub77 for pointing the discussion in the thread in the right direciton on this
[03/29/2015]
-Support Bluetooth Audio & AVRCP
-Support Consumer IR [SM-T530NU Only]
-Upgrade Display HAL to CAF Version
-Misc Bugfixes and Cleanup
[03/24/2015]
-Fix Missing Sensors HAL (Fixes Autorotate regression from the last build)
-Behind the scenes work for IR (need someone to test on plain 530 as IR is NU only). Does not actually work yet because its using the stub HAL, but the kernel drivers are loaded, and the IR service runs.
[03/23/2015]
-Fix lighting issues with rear camera
-Reduce some dependencies on vendor libs.
[03/22/2015]
-Added support for Front/Back Camera
-Added support CIFS/NFS
-Fixed 5 ghz WiFi
-Fixed Duplicate VSYNC spam in logcat
-Fixed issues with video decoding (YouTube HD, MXPlayer HW+ Video, etc)
-Fixed various Bluetooth issues
-Fixed wallpaper issues with Trebuchet
-Identify device correctly as MSM8226 chipset
-Use Hardware Buttons by Default
XDA:DevDB Information
CyanogenMod 11 Unofficial [TM-530NU], ROM for the Samsung Galaxy Tab 4
Contributors
starlightknight
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Stable Release Date: 2015-03-29
Beta Release Date: 2015-03-22
Created 2015-03-29
Last Updated 2015-04-25
Congratulations ! :good:
Nice ROM, it installed fine on my T530 will test some more, thanks for the hard work
I got this installed but the back button and recents button didn't work at all. Its a fast rom though but it would be nice if it was a barebones CyanogenMod without the Pac Rom extras installed too.
Time for a new test, i'll test it in my t530 and report back the results.
Sent from my GT-I9300 using XDA Free mobile app
steve30x said:
I got this installed but the back button and recents button didn't work at all. Its a fast rom though but it would be nice if it was a barebones CyanogenMod without the Pac Rom extras installed too.
Click to expand...
Click to collapse
It is a pure Cyanogenmod without the Pac extras. If you're seeing them, make sure you did a full wipe before flashing as noted in the original post - you may have remnants of PAC-ROM in /system. The best way is to use PhilZ option to "Clean to Install a new ROM" as that wipes everything correctly. That could also be causing your issues with the back button as well. I completely rebuilt the device tree for this rom over the pac build, as that was based on MSM8974 when this is an MSM8226 device. If a full wipe wasn't done, you have stuff for the other device tree in /system that will mess things up. If the issue persists after a full wipe, please let me know what varient of 530 you're using, and pastebin a logcat of what happens when you press the back or recent events buttons.
starlightknight said:
It is a pure Cyanogenmod without the Pac extras. If you're seeing them, make sure you did a full wipe before flashing as noted in the original post - you may have remnants of PAC-ROM in /system. The best way is to use PhilZ option to "Clean to Install a new ROM" as that wipes everything correctly. That could also be causing your issues with the back button as well. I completely rebuilt the device tree for this rom over the pac build, as that was based on MSM8974 when this is an MSM8226 device. If a full wipe wasn't done, you have stuff for the other device tree in /system that will mess things up. If the issue persists after a full wipe, please let me know what varient of 530 you're using, and pastebin a logcat of what happens when you press the back or recent events buttons.
Click to expand...
Click to collapse
I always completely wipe everything before installing a new rom. Never wiping the tablet before installing a new rom might cause problems. I no longer have the rom installed. I will install it again and see if it was just a flike that it didnt work properly the last time. I also have Philz recovery installed because its the only one that has full brightness on the screen.
Simply great. Everything i need works great. Finally a kitkat aosp rom that given me everything i need. Flashed in TWRP on a t530 (wifi only) and running perfectly fine. Good job mate. If you want me to test anything on t530 just tell me.
Btw, otg works, so my usb keyboard is working.
Otg works, YouTube and twitch.tv works, BT works, rotation works, camera works, xposed works, everything i have tested works
Sent from my GT-I9300 using XDA Free mobile app
pirulazul said:
Simply great. Everything i need works great. Finally a kitkat aosp rom that given me everything i need. Flashed in TWRP on a t530 (wifi only) and running perfectly fine. Good job mate. If you want me to test anything on t530 just tell me.
Btw, otg works, so my usb keyboard is working.
Otg works, YouTube and twitch.tv works, BT works, rotation works, camera works, xposed works, everything i have tested works
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks! Glad to hear that it is working well for you. I believe the only difference between the SM-T530 and the SM-T530NU is the the NU has an IR blaster, which I haven't actually enabled yet. I need to figure out how to test that because I never use it. After i do that and post a build with IR, it will be useful if you check and make sure it doesn't break the regular 530. Those two from what I can tell are vary similar, its more of any celluar varients that I would be worried about, because this is build for wifi only..
Let me know if you find anything broken
I got this to work properly. I have one question though. Is there a way to get youtube working without having all the other GAPPS rubbish installed. I noticed that the tablet got slower as soon as I installed GAPPS. The tablet flies along without GAPPS installed and I only want youtube working without all that other rubbish bogging down the tablet.
steve30x said:
I got this to work properly. I have one question though. Is there a way to get youtube working without having all the other GAPPS rubbish installed. I noticed that the tablet got slower as soon as I installed GAPPS. The tablet flies along without GAPPS installed and I only want youtube working without all that other rubbish bogging down the tablet.
Click to expand...
Click to collapse
Glad its working for you now
To be honest, I'm not sure - you could try copying the Youtube APK off of the device and then side-loading it on a fresh install without installing all of GAPPs, but I'm not sure if that will just prompt you to install all of them or not if you do that.
Are there particular use cases you are noticing are slower? I did not really notice any difference with or without GAPPs, other than the initial boot time as they were unpacked and installed. If there are particular situations that cause this, then we could dump some logs to see if there is something that could or needs to be optimized.
starlightknight said:
To be honest, I'm not sure - you could try copying the Youtube APK off of the device and then side-loading it on a fresh install without installing all of GAPPs, but I'm not sure if that will just prompt you to install all of them or not if you do that.
Click to expand...
Click to collapse
I have youtube backed up with all my other apps with Titanium Backup and when I try running youtube without GAPPS it fails and a popup states Youtube has failed to start (or something similar) and if I install the GAPPS I have which is older than the version that is needed it tells me that google needs to be updated. So then I update that and tried freezing the google apps I dont want or use but youtube fails.
starlightknight said:
Are there particular use cases you are noticing are slower? I did not really notice any difference with or without GAPPs, other than the initial boot time as they were unpacked and installed. If there are particular situations that cause this, then we could dump some logs to see if there is something that could or needs to be optimized.
Click to expand...
Click to collapse
The whole tablet is slightly slower with GAPPS installed. I've opened a gapps zip with WINRAR and removed some of what I dont want and only left whats needed for play store to run so it improved a bit.
Hi,
I didn't try it for now...
But thanks for the good work!!
For the Gapps, have you try PAGapps?
It has different package with a lot of options.
The smallest one should be around 136Mo. You can also remove some apk with a config file.
All other apps are available on Play Store...
Gustave17 said:
Hi,
I didn't try it for now...
But thanks for the good work!!
For the Gapps, have you try PAGapps?
It has different package with a lot of options.
The smallest one should be around 136Mo. You can also remove some apk with a config file.
All other apps are available on Play Store...
Click to expand...
Click to collapse
The GAPPS package I modded is only 76MB. Its just the bare essentials
steve30x said:
The GAPPS package I modded is only 76MB. Its just the bare essentials
Click to expand...
Click to collapse
Oh ok, so it's what we need...
Y
steve30x said:
I have youtube backed up with all my other apps with Titanium Backup and when I try running youtube without GAPPS it fails and a popup states Youtube has failed to start (or something similar) and if I install the GAPPS I have which is older than the version that is needed it tells me that google needs to be updated. So then I update that and tried freezing the google apps I dont want or use but youtube fails.
The whole tablet is slightly slower with GAPPS installed. I've opened a gapps zip with WINRAR and removed some of what I dont want and only left whats needed for play store to run so it improved a bit.
Click to expand...
Click to collapse
I used an aroma based gapps. You can install only what you need. About using YouTube without gapps, i dont know if tubemate could do the trick. Use aptoide to install it if you dont like play store. Here is the link for the aroma gapps: http://forum.xda-developers.com/showthread.php?t=2547250
Sent from my GT-I9300 using XDA Free mobile app
---------- Post added at 11:01 PM ---------- Previous post was at 10:45 PM ----------
Oh, forgot one thing, rear camera is too dark but frontal camera is fine.
Sent from my GT-I9300 using XDA Free mobile app
pirulazul said:
Oh, forgot one thing, rear camera is too dark but frontal camera is fine.
Click to expand...
Click to collapse
It has something to do with the lighting detection or some other initial initialization that I haven't figured out yet, but as a workaround if you toggle between camcorder mode and back it'll brighten up.
starlightknight said:
It has something to do with the lighting detection that I haven't figured out yet, but as a workaround if you toggle between camcorder mode and back it'll brighten up.
Click to expand...
Click to collapse
Tested and working fine. Is a nice workaround. I dont mind about this bug as I only use front camera for Skype and such things, but im glad this workaround is pretty easy and fast
Sent from my GT-I9300 using XDA Free mobile app
Hi Everyone,
I updated the original post with a new build. This build should fix the lighting issues with the rear camera the first time it is used. After I debugged the mode switching with logcat I was able to find out what the issue was. I also am working on reducing dependencies on vendor libs where possible by getting more of the modules that can be built from source building from source.
I've started exploring IR blaster support for NU users and I am continuing to look for a solution for bluetooth audio, but I don't have either yet. Stay tuned for future updates
If you already installed the ROM most times you should be able to flash over it, but if you see anything weird after, try wiping to confirm if its a bug or weirdness after upgrading (you can always nandroid before wiping if you're unsure and roll back if its not related to upgrading).
Please let me know if you find any issues. Include model number and if possible a logcat as well.
Enjoy!
Congrats starlightknight!
Anyone tried this on the SM-T530?

[ROM][LINEAGEOS][7.1.2][OMS][microG][UNOFFICIAL] Samsung Galaxy Tab A 7.0 LTE SM-T285

This is a port of LineageOS 14.1 for the Samsung Galaxy Tab A 7.0 (2016) LTE SM-T285. LineageOS needs no introduction, it essentially a rename from CyanogenMod due to naming issues.
5.1.1 is the best that you can get from samsung right now and it is not known if they plan to do any upgrades. I have absolutely no idea why samsung chose to stay with the outdated 5.1.1 mid 2016 when we already got 7.1 coming out. This custom rom is probably the best you can get if you want an upgrade from Lollipop. Performance on the latest build is also better, you be the judge.
I don't recommend you use this as a daily driver, but it should be good enough for some. Make sure you read the pending issues below and decide if this is acceptable to you before you flash this rom.
Based off on LineageOS 14.1 sources which is based on Nougat 7.1.2
Device Tree:
=========
https://github.com/jedld/android
https://github.com/jedld/device_samsung_gtexslte.git
https://github.com/jedld/vendor_samsung_gtexslte.git
https://github.com/jedld/kernel_samsung_gtexslte.git
Note: June 27+ builds uses a special kernel that uses newer mali 400 libs https://github.com/jedld/kernel_samsung_gtexslte/tree/performance_2
Update October 17, 2018
====================
Released maintenance patch - Latest security patches + latest lineageos 14.1 patches
Update December 9, 2017
====================
- November Security Patches
- Latest changes from upstream Lineageos
Update October 5, 2017
==================
- Security updates (October 5 patches, blueborne fix)
- updated kernel to 3.10.107
Update September 27, 2017
======================
This is more of an upstream refresh release and some updates to graphics
- Latest upstream changes from Lineageos
- Using source compiled gralloc build. Seems to speed things up
- now using Android N audio policy config xml files. This should allow for a bit more options for tweakers
- Linux kernel now updated to 3.10.106
Update August 21, 2017
=================
hotfix release: fixed audio_policy.conf file which causes earphones not to register.
Update August 20, 2017
=================
Minor updates:
- alarm clock bug seems to have been fixed
- Update android build to NJH47F
- Added microG patches (https://github.com/microg/android_packages_apps_GmsCore/blob/master/patches/android_frameworks_base-N.patch)
Update June 27, 2017
================
Added a build with Substratum OMS support. Please visit the download section, OMS builds should have a -OMS in its archive name. Use this build if you are into themes and want to use Substratum. For details on substratum please visit the relevant forums.
Update June 26, 2017
================
- Enabled hw decoders (should speed up videos and reduce cpu usage), some glitches can still occur though
- Updated Mali userspace and kernel drivers, use updated gralloc and hwcomposer (Should speed up UX)
- Added NTP settings for GPS
- Updated to LineageOS build NJH47B with June 5 security patches
- Fixed KSM causing a battery drain
- A number of tweaks that I can't remember
- issues: Camera won't work with the stock camera app. Seems to work under third party apps. Video is still broken though.
As usual hit the download section for both the newest and oldest builds. This build also uses an experimental kernel under the performance_2 branch:
https://github.com/jedld/kernel_samsung_gtexslte/tree/performance_2
This build is still alpha so there might still be issues.
Update June 5, 2017
================
minor fixes
- Fix wifi hotspot
- Added GPS patches by @Vagr9K (gps should at least load in apps)
Update May 28, 2017
================
- Fix lock screen
- Incorporate kernel fixes c/o @Vagr9K
- Fix bluetooth
- Update to 7.1.2 Nougat N2G470
Update Feb 12, 2017
===============
- really fix mtp and usb connectivity
- There is a bug where pattern unlock won't show up even when you swipe up in the lockscreen. As a workaround make sure you select "Directly show pattern view" in the "pattern unlock settings" page (Click on the settings knob besides the Screen Lock option). If you somehow forget to do this, you can click on a notification to force pattern unlock to show up, if you don't have notifications, connect your device to USB and the charing notification should show up.
Update Feb 11, 2017
===============
- Improved graphics, HW composer, gralloc built from source and updated Mali drivers
- F2FS support for data partition
Update Jan 31, 2017
===============
Bundled with the new perf+ kernel that I am using for the CM-13 buids
Works:
- Wifi/SMS
- Mobile Data (Need to restart once after first boot)
- Audio
- Graphics
- Incoming/Outgoing Calls
- MTP
- Camera (Stills capture works with 3rd party apps)
- Bluetooth
- Wifi Hotspot
Does not work:
- video recording (sometimes works with 3rd party apps like open camera)
- GPS (no fix)
Issues
* Stability issues and some boot loops (Try to disable hardware GPS, or location services which may solve it)
* Wifi and network performance issues when both bluetooth and wifi is on and vice versa (needs confirmation from testers). I'm not sure if this problem also happens under stock. So if someone can give me feedback that would be appreciated.
* Setting alarms using the stock clock app will crash your tablet, use third party apps instead (this is a bug in upstream LineageOS and not related to this device)
Not essential but still needs to worked on
- HW encoders (06/26/2017 hw decoders now supported)
Other Notes:
- selinux permissive
Most of the issues are fixable, I just need more time and encouragement
SM-T280 Users: Unfortunately this rom would probably not work on it since the SM-T285 and SM-T280 have different kernels and slightly different hardware. I don't have access to this device so it would be hard for me to port it over. However I believe there are a lot of similiarities in the device tree that can be shared. If a dev with the SM-T280 is interested I can probably help.
Download
========
Remember flashing an unofficial ROM on your samsung device will probably void your warranty, Samsung representatives will probably not be able to help you as they are still stuck at 5.1.1 land as of now and have no idea how to handle a SM-T285 that is running 7.1.
As always flash this at your own risk. Make sure you have a copy of the stock ROM so that you have something to fall back to, which is highly the case when using an experimental rom.
See DevDB download section. Or get the latest version LINEAGE-OMS-14.1-20181117-UNOFFICIAL-SMT285-ALPHA.zip
For Older Versions/OMS builds see downloads sections:
All Downloads
Note that this rom is pure stock and does not come with the Play Store or any Gapps, I suggest you download a micro gapps package separately and install it via recovery.
There have been reports that recent versions of open gapps don't work properly, it is advised to use older versions instead (e.g. open_gapps-arm-7.1-nano-20161109.zip)
Installation Instructions
==================
Perform a backup of all of your important files. This ROM is experimental and I will not be responsible for your loss of data.
Download the zip file and extract the tar.
Use Odin/Heimdall to flash the tar file to your device. If you are coming from stock or another rom make sure you wipe first using TWRP. DO NOT USE twrp to flash these zip files, they are not configured for that.
Root and customization/ Build Guide
===================
LineageOS unlike Cyanogenmod does not come with root. However you can easily root it by using TWRP to install the latest version of SuperSU.
If you want to customize this ROM and/or repackage it you may use this guide as a reference.
XDA:DevDB Information
LineageOS-14.1 Samsung Galaxy Tab A 7.0 LTE (SM-T285), ROM for the Samsung Galaxy Tab A series
Contributors
jedld
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: LineageOS
Version Information
Status: Alpha
Created 2017-01-31
Last Updated 2018-10-17
Awesome work!
wow! Thanks jedid!
EDIT 2 amazing...wifi, cellular data for internet, sms, mms, calls all work (and no echo!)
as you wrote...mms (data) and internet (data) work after the 1st reboot
not yet installed gapps
slower than cm13 but an incredible start! (compare with tab s, s2 that even have official marshmallow and even nougat coming or already there for the tab s2 that have all call and data issues...this one is simply a great feat!)
only thing for some reason it will not automatically get the time and day from the cellular network
EDIT 3
a TWRP backup would not restore properly-android.phone.com errors (no root no gapps just basic setup)
strange thing when I flashed gapps (full not pico from Oct for 7.1) had all kinds of google apps force-closes and the network would not connect easily-it did but the errors never ended so I ended up trying to go back to the twrp backup which is when I got the android. phone.com stopped error (repeatedly coming)
am redoing the installation now (maybe was a bad twrp backup cannot know for sure)
mac231us said:
wow! Thanks jedid!
EDIT 2 amazing...wifi, cellular data for internet, sms, mms, calls all work (and no echo!)
as you wrote...mms (data) and internet (data) work after the 1st reboot
not yet installed gapps
slower than cm13 but an incredible start! (compare with tab s, s2 that even have official marshmallow and even nougat coming or already there for the tab s2 that have all call and data issues...this one is simply a great feat!)
only thing for some reason it will not automatically get the time and day from the cellular network
EDIT 3
a TWRP backup would not restore properly-android.phone.com errors (no root no gapps just basic setup)
strange thing when I flashed gapps (full not pico from Oct for 7.1) had all kinds of google apps force-closes and the network would not connect easily-it did but the errors never ended so I ended up trying to go back to the twrp backup which is when I got the android. phone.com stopped error (repeatedly coming)
am redoing the installation now (maybe was a bad twrp backup cannot know for sure)
Click to expand...
Click to collapse
Also happened to me. What I did was to rewipe after Gapps and it worked OK after that. Also set GPS to power saving
issues just reporting...updates
by rewipe do you mean wipe dalvik and cache? thx
edit
for time i just unchecked the auto time zone and manually selected my time zone...the time and day are now correct (but it is an issue..understand way early)
few things
the file manager seems to be missing the root option in general settings and prompts to add root permissions when the option does not show up (maybe because it has no CM root? and that an SU root is secondary? even if cm root is not set?)
the clock has the similar type of error as in cm13 (extreme only?)..try setting up alarm and it freezes when tapping OK to set alarm and then reboots (bootloops just as getting to android is starting message) (need to delete clock data in twrp)
no speakerphone but that has been absent anyway in cm13 and omni as well and the previous cm14
also problem connecting to the computer choosing mtp protocol the usb debugging and the connection option notifications vanish (even if set to always show) (think it does not do anything and remains in charge mode) through dev menu in settings it appears picture transfer may be set
the above are minor irritants given all the other things that are working! thanks
EDIT3
gapps 7.1 pico 20161024 worked no need for dalvik and cache wipe
Hello
Can you fix GPS? The Rom is nice but i really Hard ned GPS. Or give IT nö Chance to fix GPS?
Kevinkuensken said:
Hello
Can you fix GPS? The Rom is nice but i really Hard ned GPS. Or give IT nö Chance to fix GPS?
Click to expand...
Click to collapse
I see a path forward to fix it, but it will require more time to do so.
mac231us said:
by rewipe do you mean wipe dalvik and cache? thx
Click to expand...
Click to collapse
I did a full data wipe after gapps, then it worked. Flashing gapps after going through a first boot seems to cause problems.
@jedid
Ok i hope IT give a fix for GPS. Then ist Use it as Daily.
jedld said:
I did a full data wipe after gapps, then it worked. Flashing gapps after going through a first boot seems to cause problems.
Click to expand...
Click to collapse
the gapps 7.1 pico 20161024 worked without any dalvik wipe (not sure what happened earlier but suspect it was because i used a full stock although of the recommended timeframe of oct 2016 (7.1 only goes back to that month anyway)
Used it the whole day..calls text mms browsing
root explorer would not work (blank screen upon opening)-am using Fx explorer (root which does a great job anyway especially if pasting entire folders into system app/priv-app folders-sets the permissions automatically and correctly)
camera does not work known anyway (was not coming up on 2nd/3rd try)
lte signal similar to cm13 (omni is still fastest to get on and stick)
but at times happened at least 5 times and in static position that the internet signal would drop and then come back (so somewhat finicky there)
lag is there when opening certain apps-just sits there
happens at times when pressing ok button in say some app where you have to accept or reject
but alpha...known and/or expected
don't about bluetooth headset, netflix, audio sophisticated stuff..not into these/kept up with the times
youtube works no issues
odd thing if some app or function fails for some reason it says browser stopped...will have to note down which ones gave that error that had nothing to do with the internet browser (opera beta that I use works no issues as does the built-in browser...unless the data signal drops for some reason-then have to turn off and on the data/or even toggle airplane mode to restart the radio)
Just like your other alpha builds, this is really good; great work! Subjectively, the ROM feels quite fast.
The bugs I noticed were:
1. MTP is not working for me
2. Scrolling was smooth, but slow, and eventually got jerky over time
3. The tablet can be detected by other devices when Bluetooth is on, but it cannot receive any files
4. For some reason, CM Transfer - I did not test other apps that use the same approach to transfer files - is not working
---------- Post added at 12:23 PM ---------- Previous post was at 12:17 PM ----------
Was this device made with Android 7.1 in mind? Some time last year, when I was trying to install a ROM using Flashfire, I noticed that this device seems to have two data partitions. After installing this ROM, the tablet reported that the total 'shared' internal memory was around 8GB, rather than the usual five-or-so gigabytes. I was very surprised
acornkenya said:
Just like your other alpha builds, this is really good; great work! Subjectively, the ROM feels quite fast.
The bugs I noticed were:
1. MTP is not working for me
2. Scrolling was smooth, but slow, and eventually got jerky over time
3. The tablet can be detected by other devices when Bluetooth is on, but it cannot receive any files
4. For some reason, CM Transfer - I did not test other apps that use the same approach to transfer files - is not working
Click to expand...
Click to collapse
Didn't notice MTP wasn't working will take a look at it.
As for bluetooth it is still essentially broken in this build.
---------- Post added at 12:23 PM ---------- Previous post was at 12:17 PM ----------
Click to expand...
Click to collapse
Was this device made with Android 7.1 in mind? Some time last year, when I was trying to install a ROM using Flashfire, I noticed that this device seems to have two data partitions. After installing this ROM, the tablet reported that the total 'shared' internal memory was around 8GB, rather than the usual five-or-so gigabytes. I was very surprised
Click to expand...
Click to collapse
There are changes to how /data is structured but it is still one partition from what I know. It is still a mystery to me how it computes storage especially if you set your external sd card as adoptable, it could probably combine the size of both system and data in that report.
jedld said:
Didn't notice MTP wasn't working will take a look at it.
As for bluetooth it is still essentially broken in this build.
There are changes to how /data is structured but it is still one partition from what I know. It is still a mystery to me how it computes storage especially if you set your external sd card as adoptable, it could probably combine the size of both system and data in that report.
Click to expand...
Click to collapse
.now on a 2nd installation..TWRP backup restore runs into issues (twice now) (only on lineage not cm14.1/13.1/omni) get android.phone stopped issue.
mtp issues..yes in #4 "also problem connecting to the computer choosing mtp protocol the usb debugging and the connection option notifications vanish (even if set to always show) (think it does not do anything and remains in charge mode) through dev menu in settings it appears picture transfer may be set"
it shows up for selection but does not work (sits in charge mode)...I think the picture transfer appears to get set...will check again and try to restore the backup without data
acornkenya said:
Just like your other alpha builds, this is really good; great work! Subjectively, the ROM feels quite fast.
The bugs I noticed were:
1. MTP is not working for me
2. Scrolling was smooth, but slow, and eventually got jerky over time
3. The tablet can be detected by other devices when Bluetooth is on, but it cannot receive any files
4. For some reason, CM Transfer - I did not test other apps that use the same approach to transfer files - is not working
---------- Post added at 12:23 PM ---------- Previous post was at 12:17 PM ----------
Was this device made with Android 7.1 in mind? Some time last year, when I was trying to install a ROM using Flashfire, I noticed that this device seems to have two data partitions. After installing this ROM, the tablet reported that the total 'shared' internal memory was around 8GB, rather than the usual five-or-so gigabytes. I was very surprised
Click to expand...
Click to collapse
anyone here having issues restoring from twrp backup (tried 3 times now each time it fails with looping android.phone crashes-muting the app then toggling airplane mode to restart the radio does not work) basically have to set it up and use it (the rom) but cannot try anything else (or have a backup that can be used in case things go wrong)...ran into the same clock issue as on cm13 (extreme only?) ...could not get out of the rebooting loop (tried deleting data for the desk clock) and then twrp backup would not work either
thanks
edit
I am able to restore without data (so have to set up again including supersu but at least it avoids the odin flashing part)
Seems the alarm clock issue happens on all LineageOS roms and not just mine. Their advice is to just get another app from the app store while they are fixing it.
Hi, thanks for continuing to work on this device.
Sadly, I have (or rather my granny does) a SM-T280... In the last thread there was someone who wanted to try to port to the T280, is there still work going on?
Also can I help? I am not really a developer, but a tinkerer; and I am fed up enough by the Samsung nonsense to try and help (as long as I can be reasonably certain to be able to restore the tablet to a working state even if I mess up, it's not mine after all^^)
SM-T285
:crying:
Just bought SM-T285 yesterday.
Last night I look in youtube on how to root my Samsung Tab A 7.0.
Me, as the stupid human followed the tutorial installing the img then poof! BOOTLOOP.
(looking for stock rom to flash it tru Odin)
Newbie here guys!
I know you can find ways to fix it.
We can wait..
Hello, can you port this for the T580? I kinda really hate CrapWiz
TrapCard said:
:crying:
Just bought SM-T285 yesterday.
Last night I look in youtube on how to root my Samsung Tab A 7.0.
Me, as the stupid human followed the tutorial installing the img then poof! BOOTLOOP.
(looking for stock rom to flash it tru Odin)
Newbie here guys!
I know you can find ways to fix it.
We can wait..
Click to expand...
Click to collapse
Search on the internet.. Several sites updato (very fast), Sammobile.com, Samsung-updates.com
Sent from my SM-T285 using XDA Free mobile app
build 02112017 LineageOS 7.1.1 just released. Hop over to the OP or Downloads section. Enjoy!
couple of issues?
jedld said:
build 02112017 LineageOS 7.1.1 just released. Hop over to the OP or Downloads section. Enjoy!
Click to expand...
Click to collapse
Awesome!
Sent from my SM-T285 using XDA Free mobile app
edit
sorry if not valid here..
jedid, it seems the ftp issue is still there? as before checking or selecting the ftp option simply removes the toggle from the notification (does not show up until next reboot) and does not connect the drives to the computer
also not sure if you were looking at this issue but need to manually select the network time zone (does not automatically detect)
automatic takes it to GMT

[MOD][6.0/7.1/8.0][V16.0] Enhance Experience

Hello, This is my first MOD which actually works.
Visit my new website here for detailed info: https://chetzjain1215.wixsite.com/enhancexp (currently the site isn't optimised for phones, but working on it. )
Code:
I am not responsible if you brick your devices or other issues because of my MOD.
Do some research or ask me if you have any concerns about it.
​
Q:So, What is this thing?
A: It basically Replaces stock LineageOS apps with the Google apps.
Q:Why do we need this?
A: If you're using Nova launcher or Pixel launcher i'm sure you would have come across ''force 3D touch". That thing doesn't take place in Stock lineage apps like Phone, Messaging or Clock etc. Also the UI of Calendar app isn't good as compare to Google calendar app, however Google apps is the solution.
Q:What else does it do?
A: It will install Sony Music player (Beta version), trust me it isn't bloatware but something better than Eleven (stock lineage music player), also it adds a nice unlock sound effect.
Features: 1) Removes Lineage apps: Calendar, Clock, Eleven, Calculator, Messaging, Contacts and Phone.
2) Adds Google apps of: Calendar, Clock, Calculator, Messaging, Contacts and Phone, Beta version of Sony Music.
3) Unlock Sound effect from MIUI.
**CAUTION**: I've tested the MOD only with Official RR 5.8.3 and with NANO open gapps package.
THINGS YOU SHOULD DO AFTER INSTALLING: 1) Set Phone as default app by going in Settings>Apps>Setting icon (Top right corner), under default, select Phone app. That's it.
**Installation For recovery flashing***
1) Flash your Favourite (7.1.1/7.1.2) ROM and then flash Nano Gapps.
2) Go back in TWRP and select "MOUNT" and tick system.
3) Select my MOD and flash and reboot.
**Installation For recovery flashing***
1) Take a backup seriously.
2) Open magisk and select my module and flash it. ​
Download for Stable Recovery Flashing: STABLE VERSIONS
Download for Beta Recovery Flashing: BETA VERSIONS
Download for Magisk flashing: not supported anymore
Source: Github
Credits :LineageOS
: @nicesoni_ash
:Google
:Me
(download the zip file which has high number, if possible.)
Current Version-
Stable: V16.0
Beta: V15.1
Some screenshots!
Changelogs:
To See older version of changelogs, Visit here! Older Changelogs
*For Mod*
V16.0
-
1) Fixed Clean and Dirty flash option.
2) Updated apps. (Phone, Calendar)
3) Updated Sony Music to latest beta.
4) Selecting Dirty flash will redirect you on installation.
5) Selecting Clean flash will be normal as before. (Delete apps and then installation)
6) Used Flux font.
7) Fetch system information and shows you.
8) It will show you what cpu you running, and warning above.
9) Align many texts.
10) Added option whether you want bubble patched dialer in MISC
11) Updated Changelog and Credits txt
12) Used new icons for clean and dirty flash option
13) Remove conflicting lines during installation
14) It will show the app version no.
15) Done many underhood changes
16) some small text and other fixes.
Bugs: so far none
#Enjoy!
Please consider reading some frequently asked questions before flashing it.
FAQS
look nice. btw what icon pack is that in the screenshot?
keaheng said:
look nice. btw what icon pack is that in the screenshot?
Click to expand...
Click to collapse
Thank you! and this one
Update the site for mobile, still there are many problems with it. Like slideshow and other problems like unable to see some texts in last pic. And update coming soon
New Update is up. https://www.androidfilehost.com/?fid=673368273298951161
If anyone here facing issue like phone app unable to see in app drawer, then it means you probably have dirty flash my new version of mod over old one. In order to remove this issue, either do clean flash or open root browser go in system/priv-app/GoogleDialer and remove the older version, it's something with ''8.0.1...'' and reboot
New stuff coming, tested well before implementing.
New update: https://www.androidfilehost.com/?fid=745425885120732628
So i finally "tried" to make git, i'm still new so dunno know much stuffs. but you can check the mod git here: https://github.com/chetz1215/Enhance-Experience-Global
I was not able to upload systen folder cause of bad internet connection but will do once it's stable
Nice work ? i will give feedback when i try it
Only for OP3T or other devices can try as well ?
ProudRed said:
Only for OP3T or other devices can try as well ?
Click to expand...
Click to collapse
For everyone
Some new stuffs may come soon, like mounting automatically and some apps from android O dev preview.
Clock app crashed. BTW i'm on sultan linage rom
Noob02 said:
Clock app crashed. BTW i'm on sultan linage rom
Click to expand...
Click to collapse
Please specify more, is it your first time you installed this mod? If you have flashed my mod before too, either do clean flash or go in system/app and search for related words to clock, there must be conflicting apps.
Clean cache n force stop.. now work well. Thanks ,bro?
New Update https://www.androidfilehost.com/?fid=961840155545575989

[ROM][PORT][SM-T580][SM-T585] TW Port 9.0 Pie ONE UI from SM-A600N 20190316

I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup. Better to store all partitions, at least efs and may be modem.
Instructions
1. Install custom recovery - use my twrp
2. Download the zip - firmware
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware
Information
My port based on:
firmware: A600NKSU1ZSB6 (Korea version SM-A600N) Android 9.0 with February security patch
kernel: T585XXU4CRJ8 (our stock 8.1 kernel) 3.18.14
As you known - in friday (1 March 2019) was opened beta testing for A6'18 in Korea. It has the same exynos 7870.
@gyogubin public twrp backup with 9.0 stock firmware (all beta versions send as ota update, we don't have clean firmware) https://forum.xda-developers.com/galaxy-a6/how-to/south-korea-twrp-backup-copy-a600n-t3906026
1. the same treble logic - vendor as /cache partition and cache as /hidden partition
2. wifi and bt from lineage (I build special 32bit version to get right libs for port)
3. gps, audio config and etc from our stock 8.1
4. small fixes for camera to get it work
Root
This firmware was with magisk. I.e. boot.img already patched.
If you need magisk - you just need install Magisk+Manager_v7.0.0.apk, install, open manager, then reboot firmware and reopen manager
Do not try install Magisk-v18.1.zip - you will get bootloop
Work
Almost everything works, but you have to remember that this is beta version
Problems
1. keyboard - this is port from phone, it use phone layout. I can set ro.build.characteristics=tablet, but it will cause problems with add languages in samsung keyboard app
Hints
1. rotate home screen - open "Home sccreen settings" and activate "Rotate to landscape mode"
2. battery percentage - open "Settings"-"Notifications"-"Status Bar" and activate "Show battery percentage"
3. hide virtual keys - open "Settings"-"Display"-"Navigation bar" and activate "Full screen gestures". And then you can turn off "Gesture hints".
Version info
4. 20180316:
- update kernel (our old is 3.18.14, new one is: 3.18.91)
- update wifi driver (it's depend of kernel, now in new update wifi as part of new kernel, I rebuild special 32bit lineage for new wifi hal with new wifi driver support)
- vibrator is back for t585
3. 20180306:
- fix mtp
- fix flip
- fix keystore (thanks @ananjaser1211)
- update kernel to use new video driver (r28 mali) (thanks @ananjaser1211)
2. 20180305:
- remove a lot of garbage, leave only minimum, decrease system size from 2.5gb to 2gb, all zip less, then 1.3gb
- initial version for SM-T580 (I cannt do only wifi version, because it's strong depends in framework, but in scripts now noril, fix for cbd, update gps (gpsd, gps.default.so and gps.cfg))
1. 20180303:
- initial version
SM-T580
3. 20180316: new kernel, new wifi - this is small update, not full firmware, if you install from zero - install 20180306 first and then 20180316 update: https://drive.google.com/file/d/1QJfPfpDuWmFRDpsK8tmZLIleHHTJ0pND/view?usp=sharing
2. 20180306: fix mtp, fix keystore (samsung account, lockscreen), update video driver up to r28: https://drive.google.com/file/d/1awbjuwbFqmZo5CgmruMkYL9DUhSlLn3c/view?usp=sharing
1. 20180305: https://drive.google.com/file/d/1Hr9PZV6UbohnOZC4LjxHRCoxqxHjJ1u2/view?usp=sharing
SM-T585
4. 20180316: new kernel, new wifi - this is small update, not full firmware, if you install from zero - install 20180306 first and then 20180316 update: https://drive.google.com/file/d/1smcl_EQeGz3ShR3CdgVqN6D78rhE0KwX/view?usp=sharing
3. 20180306: fix mtp, fix keystore (samsung account, lockscreen), update video driver up to r28: https://drive.google.com/file/d/13rIhvdOyA4UOAPW9XTC_qzyVphdnsHOV/view?usp=sharing
2. 20180305: https://drive.google.com/file/d/1ZDoTvVKSr5xn04-9coJRFkk7jngQJYP2/view?usp=sharing
1. 20180303: https://drive.google.com/file/d/1QCzbhhI3I7SINYO3CpeIX4SVwT9CZoL5/view?usp=sharing
Thanks
Samsung
Wow Valera! Awesome work!
I will wait for the version for t580 if there will be any haha ​​very anxious
Thanks
Also waiting for the T580 wifi Variant
well I could not wait and also install on the t580. Rom is quite fast and has the errors that Valera mentioned. is definitely a good port beyond that some things like the size corresponds to the galaxy a6 and does not suit tablet mode. I hope you can carry a tablet for more adaptation. Beyond everything, it's great and although it takes a few minutes, it pleases me a lot. Hopefully you can make the zip for t580 even if it's a lot of asking a lot of thanks!
Valera1978 said:
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup. Better to store all partitions, at least efs and may be modem.
Instructions
1. Install custom recovery - use my twrp
2. Download the zip - firmware
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware
Information
My port based on:
firmware: A600NKSU1ZSB6 (Korea version SM-A600N) Android 9.0 with February security patch
kernel: T585XXU4CRJ8 (our stock 8.1 kernel) 3.18.14
As you known - in friday (1 March 2019) was opened beta testing for A6'18 in Korea. It has the same exynos 7870.
@gyogubin public twrp backup with 9.0 stock firmware (all beta versions send as ota update, we don't have clean firmware) https://forum.xda-developers.com/galaxy-a6/how-to/south-korea-twrp-backup-copy-a600n-t3906026
1. the same treble logic - vendor as /cache partition and cache as /hidden partition
2. wifi and bt from lineage (I build special 32bit version to get right libs for port)
3. mali driver, gps, audio config and etc from our stock 8.1
4. small fixes for camera to get it work
Root
This firmware was with magisk. I.e. boot.img already patched.
If you need magisk - you just need install Magisk+Manager_v7.0.0.apk, install, open manager, then reboot firmware and reopen manager
Do not try install Magisk-v18.1.zip - you will get bootloop
Work
Almost everything works, but you have to remember that this is beta version
Problems
1. keyboard - this is port from phone, it use phone layout. I can set ro.build.characteristics=tablet, but it will cause problems with add languages i keyboard
2. usb - mtp mode dnw
3. stock camera app is buggy, use any other (open camera)
SM-T585
1. 20180303: https://drive.google.com/file/d/1QCzbhhI3I7SINYO3CpeIX4SVwT9CZoL5/view?usp=sharing
Thanks
Samsung
Click to expand...
Click to collapse
Nice rom valera
Valera1978 said:
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup. Better to store all partitions, at least efs and may be modem.
Instructions
1. Install custom recovery - use my twrp
2. Download the zip - firmware
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware
Information
My port based on:
firmware: A600NKSU1ZSB6 (Korea version SM-A600N) Android 9.0 with February security patch
kernel: T585XXU4CRJ8 (our stock 8.1 kernel) 3.18.14
As you known - in friday (1 March 2019) was opened beta testing for A6'18 in Korea. It has the same exynos 7870.
@gyogubin public twrp backup with 9.0 stock firmware (all beta versions send as ota update, we don't have clean firmware) https://forum.xda-developers.com/galaxy-a6/how-to/south-korea-twrp-backup-copy-a600n-t3906026
1. the same treble logic - vendor as /cache partition and cache as /hidden partition
2. wifi and bt from lineage (I build special 32bit version to get right libs for port)
3. mali driver, gps, audio config and etc from our stock 8.1
4. small fixes for camera to get it work
Root
This firmware was with magisk. I.e. boot.img already patched.
If you need magisk - you just need install Magisk+Manager_v7.0.0.apk, install, open manager, then reboot firmware and reopen manager
Do not try install Magisk-v18.1.zip - you will get bootloop
Work
Almost everything works, but you have to remember that this is beta version
Problems
1. keyboard - this is port from phone, it use phone layout. I can set ro.build.characteristics=tablet, but it will cause problems with add languages in samsung keyboard app
Hints
1. rotate home screen - open "Home sccreen settings" and activate "Rotate to landscape mode"
2. battery percentage - open "Settings"-"Notifications"-"Status Bar" and activate "Show battery percentage"
3. hide virtual keys - open "Settings"-"Display"-"Navigation bar" and activate "Full screen gestures". And then you can turn off "Gesture hints".
Version info
3. 20180306:
- fix mtp
- fix flip
- fix keystore (thanks @ananjaser1211)
- update kernel to use new video driver (r28 mali) (thanks @ananjaser1211)
2. 20180305:
- remove a lot of garbage, leave only minimum, decrease system size from 2.5gb to 2gb, all zip less, then 1.3gb
- initial version for SM-T580 (I cannt do only wifi version, because it's strong depends in framework, but in scripts now noril, fix for cbd, update gps (gpsd, gps.default.so and gps.cfg))
1. 20180303:
- initial version
SM-T580
2. 20180306: fix mtp, fix keystore (samsung account, lockscreen), update video driver up to r28: https://drive.google.com/file/d/1awbjuwbFqmZo5CgmruMkYL9DUhSlLn3c/view?usp=sharing
1. 20180305: https://drive.google.com/file/d/1Hr9PZV6UbohnOZC4LjxHRCoxqxHjJ1u2/view?usp=sharing
SM-T585
3. 20180306: fix mtp, fix keystore (samsung account, lockscreen), update video driver up to r28: https://drive.google.com/file/d/13rIhvdOyA4UOAPW9XTC_qzyVphdnsHOV/view?usp=sharing
2. 20180305: https://drive.google.com/file/d/1ZDoTvVKSr5xn04-9coJRFkk7jngQJYP2/view?usp=sharing
1. 20180303: https://drive.google.com/file/d/1QCzbhhI3I7SINYO3CpeIX4SVwT9CZoL5/view?usp=sharing
Thanks
Samsung
Click to expand...
Click to collapse
New updates. Due to exams cant test right now but will do it later i did checked 1st build it nice that bugs are fixed :good:. Will check it after !exams!!!!!!!!
Great job as usual. I haven't been able to find anything wrong. The tablet is more responsive with this Rom rather with the ones built from a lineage base. Do you think that one day we'll have a Dex launcher like the one from the tab s4?
It would be the biggest goal for this tablet.
Again, thanks for your time.
Just curious, is it normal that the setup jumps all the way to sign in for samsung account? It jumps over wifi connections, license agreement, all of the google account setup.
bobfrantic said:
Just curious, is it normal that the setup jumps all the way to sign in for samsung account? It jumps over wifi connections, license agreement, all of the google account setup.
Click to expand...
Click to collapse
Yes, it's a twrp backup because there's no complete firmware yet. By the way, I've found a bug where I can't change the launcher grid size for both home and apps. There is another one where in landscape mode, it is impossible to see all the apps from the launcher because you can't scroll or move to another page.
Both minor bugs solved by installing nova launcher.
ciccio83q said:
Yes, it's a twrp backup because there's no complete firmware yet. By the way, I've found a bug where I can't change the launcher grid size for both home and apps. There is another one where in landscape mode, it is impossible to see all the apps from the launcher because you can't scroll or move to another page.
Both minor bugs solved by installing nova launcher.
Click to expand...
Click to collapse
Aaahhhh ok that explains it. Sure hope that when the official firmware is released that @Valera1978 will do a port of it for the T585/580
Thanks for giving T585 a better life
alanloax said:
well I could not wait and also install on the t580. Rom is quite fast and has the errors that Valera mentioned. is definitely a good port beyond that some things like the size corresponds to the galaxy a6 and does not suit tablet mode. I hope you can carry a tablet for more adaptation. Beyond everything, it's great and although it takes a few minutes, it pleases me a lot. Hopefully you can make the zip for t580 even if it's a lot of asking a lot of thanks!
Click to expand...
Click to collapse
There’s another method that could help you set DPI density to even extreme low or high levels.
https://www.the***********.com/change-dpi-density-android/
Change it to 700 dp
Finally exams are over. Flashed this from yesterday. Every thing's working. Installed google keyboard and pixel launcher. Everything working fine tested stock camera working. Great performance. Thanks for the ROM Valera.
1.Blue light filter is not working
Please port for Tab A6 Spen P585Y.
@Valera1978
How so you get twrp working in oreo? Ich tried my best to get it working 9n the p5xx but tw never recognized the internal andere external SD.
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Yo valera why does the notification bar look so giant. Can you pls try getting the framework from tab s5e in the next update. So that everything looks fine. i think its bcz you took it directly from a600n
shouldnt the notification panel look like this
wafi_naseem said:
shouldnt the notification panel look like this
Click to expand...
Click to collapse
That screen is 10.5
wafi_naseem said:
shouldnt the notification panel look like this
Click to expand...
Click to collapse
Because this ROM is a port from a phone genius... It's a great base but later Dev might use TAB A 2019 or S4 dump to make it look tablet like as it looks on those models
Sent from my SM-N950F using Tapatalk

[ROM][SM-T820][SM-T825][UNOFFICIAL] Lineage 17.1 | Android 10 Q | 20200211

I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup. Better to store all partitions, at least efs and may be modem.
Instructions
1. Install twrp
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware and gapps
Work
almost all
Links
[SM-T820]
5. 20200211: latest sources, February security patch: https://drive.google.com/file/d/1D8lY5z9O3oafqiWlDLvtltFDQCEHnZbN/view?usp=sharing
4. 20200113: latest sources, January security patch: https://drive.google.com/file/d/1enARwIN4oY_IrugrfncONxUGR-jbuY8s/view?usp=sharing
3. 20191224: latest sources, update kernel to 3.18.140: https://drive.google.com/file/d/1Hsl84EDxB_XQqgEPOIvyRjTdYUXuuWtR/view?usp=sharing
2. 20191013: https://drive.google.com/file/d/1z15hqXU-BL4H4MloSqukB2v1XqtUUlU2/view?usp=sharing
1. 20191010: https://drive.google.com/file/d/13gyKGE95kWFk2zbn0zW9GwiTHhyuPohr/view?usp=sharing
[SM-T825]
5. 20200211: latest sources, February security patch: https://drive.google.com/file/d/1fe4Gdlyx4U27RPJVnidhoiO1pqTp0b7I/view?usp=sharing
4. 20200113: latest sources, January security patch: https://drive.google.com/file/d/1duPl5zCv7D7xTvJjIAq6lrC7SfaWTl0c/view?usp=sharing
3. 20191224: latest sources, update kernel to 3.18.140: https://drive.google.com/file/d/1fvQMz0diPKFnzkVqMjLle74gFzn-6-Mq/view?usp=sharing
2. 20191013: https://drive.google.com/file/d/10CclbMYTINKww9dqZ_j6jKOqXcUX9s39/view?usp=sharing
1. 20191010: https://drive.google.com/file/d/1pW17U6PRt3Ptlm6WDCCbWG3HlanhaBx3/view?usp=sharing
Root
Install latest magisk (20.1+) from canary channel: https://forum.xda-developers.com/apps/magisk/dev-magisk-canary-channel-bleeding-edge-t3839337
TWRP
Use twrp from https://forum.xda-developers.com/ga...recovery-twrp-3-1-0-1-samsung-galaxy-t3581359
or my repack: https://drive.google.com/file/d/1KyX6xZ8WrcNyHo73-lHhU2dZjX0KFJc1/view?usp=sharing
Gapps
https://opengapps.org
Platform: ARM64
Android: 10.0
Sources
Sources: https://github.com/lineageos
Kernel: https://github.com/Valera1978/android_kernel_samsung_msm8996
Device: https://github.com/Valera1978/android_device_samsung_gts3llte and https://github.com/Valera1978/android_device_samsung_gts3lwifi
Vendor: https://github.com/Valera1978/android_vendor_samsung_gts3llte and https://github.com/Valera1978/android_vendor_samsung_gts3lwifi
Thanks
Thanks to LineageOS team
Uh nice - thanks Valera! Any chance you can add your manifest? I would like to try building Android once myself.
Error flashed on screen on reboot
I am getting 'There's an internal problem with your device. Contact your manufacturer for detail.' error on every reboot. I've flashed the 'BL_T825XXU3CSH9_CL16530048_QB25611745_REV00_user_low_ship_MULTI_CERT.tar.md5' bootloader but still facing the issue.
See the screenshot for error message.
Camera is not working
Valera1978 said:
I'm not responsible for any damage to your device of any sort.
Click to expand...
Click to collapse
Hi there,
do you have any intention to include palm rejection on Q?
It's the only missing feature on LOS...
Stogie87 said:
Hi there,
do you have any intention to include palm rejection on Q?
It's the only missing feature on LOS...
Click to expand...
Click to collapse
Do custom ROMs have to have palm rejection added? It's not normal feature?
This would be good to know as I got this device to use the pen!
I notice that screen is very hard to wake up. I have to play all buttons in random combination to be able to bring up lock screen. Once it get unlocked, everything works find.
I did once get system UI locked error. I have to push all buttons to force it reboot.
So I tested this rom on my T820 Wifi and in my opinion it works pretty stable, except of some issues I recognised:
- Saving pictures does not work. The pictures I get are scrambled.
- sd cards in ntfs format not working
- Palm rejection is not working
- ed xposed causes boot into download mode
- screen wakup is sometimes slow
- Viper4Android is not working
- Speaker only working on one site (right)
- it's not possible to rename SD Card or uninstall any system app like mail-app via root
- Netflix is not working
- Not possible to activate a custom notification sound
- Adaway only working with systemless host activated in magisk
- trying to use miracast causes a complete crash of system ui and makes a reboot necessary
- digital wellbeing randomly fc if settings menu is open
- sometimes hardware buttons stuck and i have to wait 5 sec until I can use them again
Thanks for your work!
*update: On second build same issues and camera just force close, now
did anyone figure out how to get the camera to work. It takes pictures but to view them they all look scribble.
does this rom work with the T825Y?
MR2_Wei said:
does this rom work with the T825Y?
Click to expand...
Click to collapse
Just try it. I think the specifications are the same like T825.
ghostman256 said:
did anyone figure out how to get the camera to work. It takes pictures but to view them they all look scribble.
Click to expand...
Click to collapse
Just use gcam it 'll work
alvinbw said:
Just use gcam it 'll work
Click to expand...
Click to collapse
Not working on second build for me
Now for the *REAL* question, does this ROM cause graphical glitches when you run a 3D load and heat the processor up to 100c?! That was my experience various unofficial LOS16/RR based Pie builds. I get temps in the worst case up to 97c under extreme load on the stock OneUI ROM, but normally it is way LOWER. Could someone (with the performance level in the power settings set to max) test games like https://play.google.com/store/apps/details?id=com.PnA.Offroad and some heavier ones for an extended period of time, and maybe some benchmarks (AnTuTu, 3DMark, etc...) while watching the CPU temp and General SoC temp with a temp guage overlay (like the one in the paid option on DevCheck).
Sent from my SM-G950U using Tapatalk
@Valera1978
Is there any chance, that you compile Havoc OS 3.0 for our Device?
Thanks in advance
I got it installed and booted but the rotate function isn't working, even when I open youtube and make it full screen it's doesn't rotate
MoSaMiChEs said:
I got it installed and booted but the rotate function isn't working, even when I open youtube and make it full screen it's doesn't rotate
Click to expand...
Click to collapse
Don't expect that anything on this rom will fixed soon.
Always the same with this dev. He releases a build with issues, then he ignores all issue reports and only releases sometimes a new build with security updates and nothing more. I wish a had wait a little bit and bought a tab s5e, because it seems to be the only new Samsung tab with fully working custom roms and palm rejection.
Better you use stock rom for tab s3.
w595shubham said:
I am getting 'There's an internal problem with your device. Contact your manufacturer for detail.' error on every reboot. I've flashed the 'BL_T825XXU3CSH9_CL16530048_QB25611745_REV00_user_low_ship_MULTI_CERT.tar.md5' bootloader but still facing the issue.
See the screenshot for error message.
Click to expand...
Click to collapse
same here
There is something that I cannot understand. The users say that there are problems with the ROM but OP says there aren't...
Quote:
Originally Posted by w595shubham
I am getting 'There's an internal problem with your device. Contact your manufacturer for detail.' error on every reboot. I've flashed the 'BL_T825XXU3CSH9_CL16530048_QB25611745_REV00_user_ low_ship_MULTI_CERT.tar.md5' bootloader but still facing the issue.
See the screenshot for error message.
Not sure if answered but I fixed this by:
Copying the complete line ro.vendor.build.fingerprint.................. from the /system/build.prop file.
Paste replacing the line ro.vendor.build.fingerprint.................. in the /vendor/build.prop file.
These files crosscheck each other looking for this line. The files must be from different builds.

Categories

Resources