This is the KCAL driver by savoca, modified to be usable on permanently-locked-bootloader devices.
Compatible Firmwares:
* Lollipop 5.02: .242/.270
* Lollipop 5.1.1: .368
Download:
.242/.270 Firmwares:
https://www.androidfilehost.com/?fid=23991606952601706
.368 Firmware:
https://www.androidfilehost.com/?fid=24052804347831921
Source:
KCAl Color Module Source at Github
How-to-install:
* Download the Zip file and unpack it
* Put the module in /system/lib/modules and set appropriate permissions
* Enter the following in Terminal:
Code:
[B]su
insmod /system/lib/modules/mdss_mdp_kcal_ctrl.ko[/B]
* If you have Init.d support put the supplied Init.d file in /system/etc and set permissions, the module will be loaded on boot with Init.d
Use this App to control your Panel.
Thanks:
* to @flar2 who made this possible
Thanks man!! Just the thing i needed........... Gonna try it now!
can you modded it to support GPE rom 5.1 made by scrubber
curiouso9 said:
can you modded it to support GPE rom 5.1 made by scrubber
Click to expand...
Click to collapse
Theoretically yes, however i got currently no time to do so, sadly.
Hi Tommy, thanks, im using your module with gpe, working fine as it should be.
With that mod I solved yellow tint problem, now screen on my 6833 looks as white as on 6802,which I sold.
Thank you for this trick
this solved my doubt
just updated the module ( you can find changelog here below my signature
its a simple flash file
just flash from recovery and this will work ( everything in one file )
Download click below attachment
this mod is only for .242 stock firmware or/and for .270 stock firmware?
vovanx500 said:
With that mod I solved yellow tint problem, now screen on my 6833 looks as white as on 6802,which I sold.
Click to expand...
Click to collapse
What's the setting you use?
Sent from my iPad using Tapatalk
infatality said:
What's the setting you use?
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
Here is the screenshot.
this mod isnt for 270... i tried and nothing happens
Got it working...thanks
Takisxx said:
this mod isnt for 270... i tried and nothing happens
Click to expand...
Click to collapse
Works flawlessly here on unlocked bootloader with zdualrecovery on rooted full stock 14.5.A.0.270. Device is C6833.
CfYz said:
Works flawlessly here on unlocked bootloader with zdualrecovery on rooted full stock 14.5.A.0.270. Device is C6833.
Click to expand...
Click to collapse
for me nothing happens. can you tell me full instructions?
Takisxx said:
for me nothing happens. can you tell me full instructions?
Click to expand...
Click to collapse
I will translate vovanx500 instructions. It's pretty simple. Of course you should be rooted, I have locked bootloader and root at 14.5.A.0.270.270 firmware on C6833. It also work on GPE ROM too.
1. Update xzdualrecovery to the latest version. I was using 2.8.21.
2. Find file XZDR.prop somewhere on your device after installation/updating of xzdualrecovery. XZDualRecovery folder on SD Card.
2.1. Edit (or add) one string in this file: "dr.initd.active=true".
3. Goto system/etc and make folder named "init.d", set permissions 755 (-rwxr-xr-x) to this folder.
4. Find file install-recovery.sh under system/etc and set permissions 644 (-rw-r--r--) to this file.
4. Download Kcal.zip from first post in this topic.
5.1. Unpack two files from it. Put file "40kcal" into previous created folder init.d, and set permission 755 (-rwxr-xr-x) to this file.
5.2. Put file "mdss_mdp_kcal_ctrl.ko" into /system/lib/modules and set permissions 644 (-rw-r--r--) to this file.
5. Download savoca software Color Control and install it. You may want to convert this app to system using Titanium or some similar software, I didn't.
6. Reboot phone, start software from p. 5 and configure. You're set.
Something like that for Xperia z kit kat?
No news, about 5.1.1 support? ;((
CfYz said:
No news, about 5.1.1 support? ;((
Click to expand...
Click to collapse
Build for 5.1.1 Firmware is up.
Tommy-Geenexus said:
Build for 5.1.1 Firmware is up.
Click to expand...
Click to collapse
Tommy, you're a good man. All working fine on 5.1.1 Great thanks for your work!
there is hope...
Anyone can share their kcal settings that makes z ultra screen look like amoled please
Related
MyFirstROM (Release Candicate)
I am proudly presenting to you my first ROM I have ever made.
NOTE:
Firstly i want so say, I am not responsible for bricked devices, dead phone, or you are getting fired because the alarm app failed. Install it at your own risk! . If you point the finger at me for messing up your device, I will laugh at you.
This ROM is based on 982.124.14.XT910.Retail.en.EU. It will not work on Droid Razr XT912 (CDMA) . Feel free to try this ROM. Any reports / comments about this ROM will be much appreciated.
Features:
Click to expand...
Click to collapse
-The ROM is fully deodexed.
-Fully zipaligned on boot
-Added some build.prop tweaks
-Added init.d support
-Rooted
-You can choose neitheir 4 launchers:
Galaxy S4 TouchWiz Launcher
Razr I Launcher
Stock ROM Launcher
Apex Launcher
-Internet speed tweaks
-VM management tweaks
-Battery tweaks
-Include Android 4.2 Camera
-4.2 Keyboard with gesture typing
-Updated these apps:
Youtube (4.4.11)
Playstore (4.0.2.7) with the new interface
Gmail (4.3.1)
Google+ (3-6-0-44338848)
Twitter (4.0.1)
-Added Greenify app, which will hibernate apps when the phone in sleep. This will save more battery
-Added busybox app
-Include Galaxy S4 Wallpapers
-Added more ringtones/alarms/notification sound
-Nano Text Editor installed
Bugs / Problems
Click to expand...
Click to collapse
1. Root access
How to fix: Install root from BMM.
2.Init.d support for tweaks
How to fix: Flash the zip file i've attached below.
How to in Install?
Click to expand...
Click to collapse
Make sure you have Boot Menu recovery installed. It will not work with other recoveries.
1. Download the ROM zip file
2. Make a backup first
3. Put the ROM file in SDCard or Internal Memory
4. Boot into the recvoery
5. Wipe cache, dalvik cache, factory reset and system/ROM
6. Install the zip file
7. Reboot
Thanks to
Click to expand...
Click to collapse
-Motorola: Jelly Bean update
-Al936: The OTA Stock ROM file
-optik19918
-pitchblack5691
-lokeshsaini94
-shakti15
-artur0588
-whirleyes
-dtrail1
I think i forgot someone, tell me
Tips for saving battery
Click to expand...
Click to collapse
-Go to settings > Wi-Fi > Hit the menu button > Advanced > Keep Wi-Fi on during sleep set to 'Never'
-Use the Greenify app
-Turn off mobile data when not in use
-Install BetterBatteryStats from PlayStore, you can know what cause the battery to drain
-Do not overclock your phone
-Use other governors and scheduler like Hotplug
-Try to undervolt your phone. I don't know whether it is working or not on this phone.
-Install JuiceDefender from PlayStore. It saves lots of battery. NOTE: This is not for heavy user, whom always turn on mobile data for example
How to install root from BMM
Click to expand...
Click to collapse
1. Boot to the recovery
2. Go to system keeper
3. Select install root
4. Reboot
5. Go to the Superuser app.
6. Swipe to the left.
7. Update the 'su' binary.
If you want more governor and io scheduler for CPU tweaks, see This thread
I've attached init.d installer script below which will enable tweaks i've added to this ROM. Thanks to [MENTION] whirleyes [/MENTION].
Link are now updated! (5/5/2013)
Download ROM (mega.co.nz) HERE
Mirror Link 1 (d-h.st)HERE
NEW Update 5/5/2013 - v0.91
Update: 28/4/2013 - v0.1 Alpha
-Initial release.
Update: 30/4/2013 - v0.2 - Alpha
-Allowed to add custom bootanimation.
-Now the ROM is fully deodexed.
-Added Nano Text Editor.
Update: 1/5/2013 - v0.21 Alpha
-Added the stock kernel, it may fix the bootloop issue (the last release i forgot to put the stock kernel during the build).
Update: 2/5/2013 - v0.8 - Beta
-Removed the kernel from the ROM to get rid of error during flash. I can't customize the stock kernel to get init.d tweaks due to a locked bootloader. i'll found a way to get the it.
Update: 5/5/2013 - v0.91 - RC1
-Changed the version to Release Candicate.
-Changed the ROM name to MyFirstROM.
-Removed several apps from the /system/app because the previous ROM file are quite large (about 490MB). I will debloat more apps in this ROM soon.
thanks, will try this rom.:good:
Don't forget to post the results!
Sent from my GT-I9300 using xda app-developers app
Looks awesome... maybe I'll give this Rom a try, and if I do, I post the results here.
Thanks dude!
Hi TheMrcool212,
I am trying to install this ROM with SS 3.11 on slot 2, but I get this error "Failed to write boot.img, aborting". Any clues?
savezia said:
Hi TheMrcool212,
I am trying to install this ROM with SS 3.11 on slot 2, but I get this error "Failed to write boot.img, aborting". Any clues?
Click to expand...
Click to collapse
try with BMM, SS cannot flash kernels (boot.img)
savezia said:
Hi TheMrcool212,
I am trying to install this ROM with SS 3.11 on slot 2, but I get this error "Failed to write boot.img, aborting". Any clues?
Click to expand...
Click to collapse
Hhhmm, i've compiled the ROM with the jelly bean EU kernel. Im very busy this week but i will looking for problems when i have time.
By the way, thank you very much for reporting.
Edit: i did'nt realize that heblu just replied. Added to the OP
Sent from my GT-I9300 using xda app-developers app
heblu said:
try with BMM, SS cannot flash kernels (boot.img)
Click to expand...
Click to collapse
Dear Heblu, dear TheMrcool212,
I imagined that was the issue, since this rom is based upon the Jelly Bean update from Motorola. Thank you so much! When and if I have time I will try with BMM and report!
Thank you again
can someone upload the rom to another link, the mega is too slow download v. with 12kb/s...
thank you in advance.
Lzto1320 said:
can someone upload the rom to another link, the mega is too slow download v. with 12kb/s...
thank you in advance.
Click to expand...
Click to collapse
I will upload it on other link soon, but not now.
Mirror link uploaded in the OP
i use bmm to install this rom, but it said abort, error, status 7.
by the way, this error not happened at the beginning installation, it shows when almost the rom flash done, then it says script error.
status 7.
Lzto1320 said:
i use bmm to install this rom, but it said abort, error, status 7.
by the way, this error not happened at the beginning installation, it shows when almost the rom flash done, then it says script error.
status 7.
Click to expand...
Click to collapse
I've checked the updater-script for errors using Android Kitchen, i got 6 errors. I am able to fix 2 of them. But can you post any shots/pictures so i can see it?
Edit: I think it is because i got no /system/usr/bin folder in the ROM.
Edit 2: i created a folder named 'bin' in /system/usr. It may fix during the flash. Now i am uploading it.
EDIT 3: The link is up at the OP
TheMrcool212 said:
I've checked the updater-script for errors using Android Kitchen, i got 6 errors. I am able to fix 2 of them. But can you post any shots/pictures so i can see it?
Edit: I think it is because i got no /system/usr/bin folder in the ROM.
Edit 2: i created a folder named 'bin' in /system/usr. It may fix during the flash. Now i am uploading it.
EDIT 3: The link is up at the OP
Click to expand...
Click to collapse
awsone man.
i will try.
Lzto1320 said:
awsone man.
i will try.
Click to expand...
Click to collapse
I think you're the only one who can help me test this ROM
Sent from my GT-I9300 using xda app-developers app
TheMrcool212 said:
I think you're the only one who can help me test this ROM
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
do not worry
there are many roms now, but when I have some time I will try it also, as many others I'm sure
thanks for this and don't give up
I'm ready to test your ROM, descriptions sounds brilliant, BUT! I can't do it. First release was with error 7. Second - with boot loop, so I can't test it, because I didn't see it. Go ahead! Great job!
can we install it on stock rom ?
e4f said:
I'm ready to test your ROM, descriptions sounds brilliant, BUT! I can't do it. First release was with error 7. Second - with boot loop, so I can't test it, because I didn't see it. Go ahead! Great job!
Click to expand...
Click to collapse
Thanks!!! I will do my best.
fusioncoast said:
can we install it on stock rom ?
Click to expand...
Click to collapse
Yes, you can install it on top of it. But i recommend you to install on other ROM slot. Like e4f said, it got a bootloop.
EDIT 1: I'm so sorry man!!, i forgot to put the stock kernel when building the ROM. i think thats the cause of the bootloop.
EDIT 2: The new release will uploaded with the kernel. Now the link is up.
This is currently only for Stock G-pad's running the current US firmware V50020d (not aosp or V50020b). US only at this time. OP will be updated if other firmwares become functional. These mods will enable full splitwindow support to your G-pad and allow you to selectively choose what apps are displayed in the splitwindow "menu". Also, please note that this is a collection of other users work combined together for the ultimate Mod!! I did not create anything here, I just put the pieces together and tested if it all worked (which it does 100%).
Prerequisites:
-You must be on firmware version V50020d
-You must be rooted
-You must have a custom recovery
-Root and recovery can be achieved using ioroot 25 and @id10terror's recovery script both located here: http://forum.xda-developers.com/showthread.php?t=2698267 . Please note that you must open the runme.bat script and manually change the firmware version from V50020b to V50020d in order for the recovery script to work. Then flash an updated TWRP from here: http://forum.xda-developers.com/showthread.php?t=2551499
-Please keep questions about root and recovery out of this thread!!
Step 1: Get Splitwindow Working
-Download and flash the V500d splitwindow mod from @hensonlf located at the bottom of this post
-Boot device and using your preferred file manager add these 2 lines to the bottom of your build.prop:
ro.lge.capp_splitwindow=true
persist.splitwindow.support_all=true
-Save and reboot device
-Please read his thread here: http://forum.xda-developers.com/lg-g-pad-83/themes-apps/split-window-g-pad-t2796066 for more detailed information, and don't forget to thank him for converting @xdabbeb's mod to our device
-You are now running splitwindow on your tablet, but wait whats this mess?......every single app I have installed appears in the splitwindow menu in a random order!! Unacceptable!! Or if you want all apps to appear there, you can stop here.
Step 2: Enable Individual App Selection
-First we must disable all installed apps from appearing in splitwindow menu. Using your preferred file manager open your build.prop and change one line we added in step one here:
persist.splitwindow.support_all=true
to:
persist.splitwindow.support_all=false
-Save and reboot device - now your running the default LG value for splitwindow
-Download and install @XabdullahX's G-Flex splitwindow mod apk from his thread here (I am not providing the download, as he has a free and donate version - the donate version alphabetizes your apps): http://forum.xda-developers.com/showthread.php?t=2707310
-Open app and grant it root permission
-When root is given, a list of all applications will be shown. Select the desired apps you want to appear in the menu when activated
-Click Apply
-Click Reboot to save (if you don't reboot from within the app, the settings will NOT stick - use the option he has provided)
-Done!! Enjoy your custom splitwindow without any crap you don't want shown
Big shout out to all these members for their work - be sure to thank them:
@Drgravy for TWRP
@autoprime for ioroot
@id10terror for root links and TWRP script
@xdabbeb for creating the splitwindow mod method for the G2
@hensonlf for porting the splitwindow mod to our device
@XabdullahX for his G-flex splitwindow apk mod
pad stuck on bootloop after flashing mod.haven't even got to edit build.prop,yet.
redhk886 said:
pad stuck on bootloop after flashing mod.haven't even got to edit build.prop,yet.
Click to expand...
Click to collapse
Do you have the US tab running 20d firmware?
annoyingduck said:
Do you have the US tab running 20d firmware?
Click to expand...
Click to collapse
Uk 20d..
how do i get out of bootloop?
nevermind,reflashed in lgtools.
any1 got this working on UK 20d?
redhk886 said:
Uk 20d..
how do i get out of bootloop?
nevermind,reflashed in lgtools.
any1 got this working on UK 20d?
Click to expand...
Click to collapse
Dam, I thought the UK may work, as they are nearly identical. Op updated for US only. The author was going to make some other varient versions of the initial mod script. Check in on his thread for more info about that.
In the future, always have a nandroid ready to restore so you don't have to fully reflash...
yeah,my bad.didn't think there would be a problem as its stock 20d.nevermind, i have an old lg backup,got most stuff back.
hopefully mod be available for UK soon.really looking forward to this feature.
redhk886 said:
yeah,my bad.didn't think there would be a problem as its stock 20d.nevermind, i have an old lg backup,got most stuff back.
hopefully mod be available for UK soon.really looking forward to this feature.
Click to expand...
Click to collapse
upload your entire /system/framework/ folder... i can do it quickly (or someone else can)
paperWastage said:
upload your entire /system/framework/ folder... i can do it quickly (or someone else can)
Click to expand...
Click to collapse
There is framework's folder. My firmware is a stock lg with root (kot49l v50020d)
https://www.dropbox.com/s/aes5bg86bp39gn1/framework.zip?dl=0
Sent from my LG-V500 using XDA Free mobile app
lelf said:
There is framework's folder. My firmware is a stock lg with root (kot49l v50020d)
https://www.dropbox.com/s/aes5bg86bp39gn1/framework.zip?dl=0
Sent from my LG-V500 using XDA Free mobile app
Click to expand...
Click to collapse
I need you to run some commands on your tablet (to re-odex the files)
when are you available? can walk you through the steps via PM or something
Sure send me a pm. Im bit busy with work but i will try when have sometime
Sent from my D6603 using XDA Free mobile app
Made from UK Vodafone Latest 14.4.A.0.118
Flash Thru TWRP
If coming from any 118 (4.4.4) version
1>Boot into recovery
2>Wipe - DATA / System / Dalvik / Cache
3> Install ROM
4>Reboot ( TWRP may ask to root the ROM after installation, just don't select it)
5>Initial boot will take some time , so please wait
6> After full first setup Root with Latest Easyroot V9.0
7> Install Latest NUT's Dual Recovery (I prefer version 121)
If coming from other versions than 118 (not tested)
Repeat steps as above (1-3)
Don't Reboot and don't select TWRP root option - Power off device
Flash any stripped.ftf (try 118 or 108) thru Flashtool
Now continue from above step 5-7
As this is my first attempt , Please share your feedback.
Rom is smooth and fast.
Added extreme sound MOD
Optimized Dalvik and Bionic
Removed Bloatware , based on pure stock 14.4.A.118
De-odexed
Zipaligned
You can Backup and restore applications from existing 108/118 ROM
I've locked Bootloader (c6802) so can't say about Unlocked Bootloader
"Please Delete Browser.apk and install any browser from market.
System>App>Browser.apk"
Download
https://drive.google.com/file/d/0B76ii58eOLicOUZWOUJFRHFQakU/edit?usp=sharing
Thanks................
can you tell me how to build a zip rom tks
Great
Great ROM but have problem with fc browser, i think z ultra should use chrome browser
skudo101 said:
Great ROM but have problem with fc browser, i think z ultra should use chrome browser
Click to expand...
Click to collapse
Yeah It needs to be removed>>System/app/browser.apk
You can install any browser like chome or opera etc.
th0ngpham said:
can you tell me how to build a zip rom tks
Click to expand...
Click to collapse
It's a long process and understanding, batter search..
babamanan said:
Yeah It needs to be removed>>System/app/browser.apk
You can install any browser like chome or opera etc.
Click to expand...
Click to collapse
i hvae problem with change sony theme, it only change wallpaper not change navigate
skudo101 said:
i hvae problem with change sony theme, it only change wallpaper not change navigate
Click to expand...
Click to collapse
+1 Me too! Please fix it
Init.d Support?
What about UB?
angry_machine said:
What about UB?
Click to expand...
Click to collapse
if it works on a locked BL it will work fine unlocked
th0ngpham said:
+1 Me too! Please fix it
Click to expand...
Click to collapse
OK
skudo101 said:
i hvae problem with change sony theme, it only change wallpaper not change navigate
Click to expand...
Click to collapse
OK I Teasted flashing original stock ftf and the issue is same with it also - changing background colour only , Please installing XPOSED and install - [SONY]Xperia Theme - Xposed Module[4.1.x+]
Link to the post -
http://forum.xda-developers.com/xposed/modules/sony-xperia-theme-xposed-module-t2803440
Thanks
easyroot?
sir good evening will you please give me the download link for EASY ROOT v9.0 and NUT's Dual Recovery???thanks you very much..
I have N910F model...l don' know if this mod will work with others note 4 variants.Thanks @bala_gamer!
Instructions:
* Backup the original apk file you are about to flash.
* Remove from Multi_Dpi_Phone .apk termination and flash via custom recovery
* Flash the 2 others mod zip via custom recovery
Downloads
I am on stock ODEX room and when I try to manually place files, the apps crash when opening them after. Any tips on how to install?
use root explorer and replace files in zip with stock ones...
Not working on N910C stock kernel, touchwiz crashes even i try to install on recovery
lamagro said:
Not working on N910C stock kernel, touchwiz crashes even i try to install on recovery
Click to expand...
Click to collapse
like l said....l made this mod for N910F variant...
manager77 said:
like l said....l made this mod for N910F variant...
Click to expand...
Click to collapse
@manager77 mate Can you share some guide to make multidpi apps...
Thanks
Sent from my SM-N910F
manager77 said:
like l said....l made this mod for N910F variant...
Click to expand...
Click to collapse
It was just a feedback, keep calm in a day i probably flashing same rom 10 times
screens please
Working flawlessly on N910F XXU1BOC5.
Will it work on n910t?
On which version are those files based. BOD2?
Let me guess. To do this, my Rom has to be deodexed right? Because I have a N910F and both apps won't work. They kept crashing after flashing and boot up
SleemLDJ said:
Let me guess. To do this, my Rom has to be deodexed right? Because I have a N910F and both apps won't work. They kept crashing after flashing and boot up
Click to expand...
Click to collapse
or you can just browse to these files via root explorer and delete the arm or odex files
Er. Aditya said:
or you can just browse to these files via root explorer and delete the arm or odex files
Click to expand...
Click to collapse
You mean delete them before flashing your individual packages?
SleemLDJ said:
You mean delete them before flashing your individual packages?
Click to expand...
Click to collapse
yes or you can do that latter as well...do you have odex files of these apks in your phone ??
Er. Aditya said:
yes or you can do that latter as well...do you have odex files of these apks in your phone ??
Click to expand...
Click to collapse
Yes I do as my Rom is odex as well.
then brother delete those odexed files and reboot your device
i guess that will solve your issue
SleemLDJ said:
Yes I do as my Rom is odex as well.
Click to expand...
Click to collapse
Thank you.
In my system/app and system/priv_app there were two odex files in each of arm folder.
I just deleted the two odex files each for phone and camera and rebooted. Now phone app and camera works.
Er. Aditya said:
or you can just browse to these files via root explorer and delete the arm or odex files
Click to expand...
Click to collapse
Thanks for this.
I flashed the zips manually like said in the OP, and had the apps crashing when I loaded back up. I'm on the stock rom which is still ODEX-ed, but after deleting the ODEX files it all seems to be working well.
Now I can finally lower the DPI from the ridiculously large default without messing up the apps!
Camera tested on N910C LP
Only issue for me (density at 480)
is the mode selection where the text is ontop of the icon and some are black (should be white text color)
else good work man!!!
Introduction
This rom is a port of Z3 Version.
Had to fix a lot of stuff, which was mostly related to screen size difference and hardware.
Don't forget to visit original thread
and press thanks button there.
Features
XZDR 2.8.24, SuperSU 2.52, Busybox 1.24.1, Pre-Rooted, SuperUser Mod, System & SD Card R/W Permissions
Ambient Display, Task Manager in Statusbar, Modded Camera, Z5 Premium Apps, Assertive Display 1.3
Advanced Power Menu
Project Desire Sound Engine Debloated & Deodexed, Kcal & AppOps and more in RXSW Settings
Stock Kernel included, Boot time, SD/Internal Card, RAM Management, Performance, Battery Life and Stability improved
Check the ROM to find even more Features
Installation
Wipe data,system and caches
Install rom via recovery
Enjoy
DOWNLOAD
XDA:DevDB Information
RXSW Z5 Experience, ROM for the Sony Xperia Z Ultra
Contributors
Uncle Lucifer, Wolfbreak, [NUT] for XZDualRecovery, Chainfire for SuperSU, IaguCool for XperiFirm, gamzekal for Ports, osm0sis & RyTekk for some Tweaks, PDesire for Sound ,Pandemic for location based Wi Fi
ROM OS Version: 5.1.x Lollipop
Version Information
Status: Stable
Stable Release Date: 2016-02-07
Created 2016-02-07
Last Updated 2016-02-07
Will definitely try! Thanks for bringing more life to our beloved ZU!
Sent from my C6833 using Tapatalk
Wow , Thanks again for bringing more life to our ZU!
来自我的 C6833 上的 Tapatalk
This is a truly amazing rom!
Question can this kernel be used with your rom?
http://forum.xda-developers.com/xperia-z-ultra/development/5-0-rockzul-kernel-t3153116
RockZ1 for ZU I'm trying to get DT2W WORKING
Sent from my C6833 using Tapatalk
huertae1985 said:
This is a truly amazing rom!
Question can this kernel be used with your rom?
http://forum.xda-developers.com/xperia-z-ultra/development/5-0-rockzul-kernel-t3153116
RockZ1 for ZU I'm trying to get DT2W WORKING
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
This kernel should work, also zombie will work.
Btw zombie kernel has best dt2w implementation so far,but it need to be inabled by writing init.d script.
Should I unlock the bootloader to use this ROM?
Oh yeah, I was thinking of asking the same thing if this one is for locked or unlocked device.
iamVhox said:
Oh yeah, I was thinking of asking the same thing if this one is for locked or unlocked device.
Click to expand...
Click to collapse
Will work for locked device as well.
Uncle Lucifer said:
Wii work for locked device as well.
Click to expand...
Click to collapse
Thanks for that, advance features like dt2w and ckal control aren't working though but I think those need custom kernel so that's a no go for locked device like mine. Flashlight on quick settings isn't working. Sound enhancement is fantastic, I thought I forgot viper4android for a while. Will test more on this.
iamVhox said:
Thanks for that, advance features like dt2w and ckal control aren't working though but I think those need custom kernel so that's a no go for locked device like mine. Flashlight on quick settings isn't working. Sound enhancement is fantastic, I thought I forgot viper4android for a while. Will test more on this.
Click to expand...
Click to collapse
DT2W is kernel related, and implemented a bit differently, so it can be either enabled in kernel or not. Switch won't make difference.
Flashlight also won't work, as we don't have it.
Rom was made for z3, which have a physical flash.
In order to make kcal working you need to enable init.d
To do so, you need to go to your external SD card and locate XZDualRecovery folder.
There you fill find a XZDR.prop file.
Enable init.d by setting this line:
dr.initd.active=true
And reboot your phone.
Uncle Lucifer said:
DT2W is kernel related, and implemented a bit differently, so it can be either enabled in kernel or not. Switch won't make difference.
Flashlight also won't work, as we don't have it.
Rom was made for z3, which have a physical flash.
In order to make kcal working you need to enable init.d
To do so, you need to go to your external SD card and locate XZDualRecovery folder.
There you fill find a XZDR.prop file.
Enable init.d by setting this line:
dr.initd.active=true
And reboot your phone.
Click to expand...
Click to collapse
Ok, thanks for that. Btw stock camera default at 20mp for 4:3 ratio and 16mp for 16:9, changing it to 8mp causes fc, no big deal as it's ported from Z3.
iamVhox said:
Ok, thanks for that. Btw stock camera default at 20mp for 4:3 ratio and 16mp for 16:9, changing it to 8mp causes fc, no big deal as it's ported from Z3.
Click to expand...
Click to collapse
Just stick to 20 and 16, I think it's worth it...you have some additional settings.
Anyone else not able to get Root in ES FILE EXPLORER and/or ROOT EXPLORER
Sent from my C6833 using Tapatalk
I used root explorer and had no issues.
Also great rom, everything works, no fc's, great battery so far etc. Thanks
Is xposed working on this rom? Kindly enlighten..
ashish2k4.dce said:
Is xposed working on this rom? Kindly enlighten..
Click to expand...
Click to collapse
yeap. but some options dosnt work.
for ex: charger plug sound didnt turn off
I had fc and rom not booting after activating gravitybox in xposed. Hence had to reflash rom.
---------- Post added at 08:29 PM ---------- Previous post was at 08:24 PM ----------
cougar11 said:
Anyone else not able to get Root in ES FILE EXPLORER and/or ROOT EXPLORER
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
Same on phone in ES explorer, but it seems that I can browse the root files.
shehzadshaukat said:
I had fc and rom not booting after activating gravitybox in xposed. Hence had to reflash rom.
---------- Post added at 08:29 PM ---------- Previous post was at 08:24 PM ----------
Same on phone in ES explorer, but it seems that I can browse the root files.
Click to expand...
Click to collapse
You can just flash Xposed uninstaller, no need to reflash rom.
Gravity is more for aosp, use Serajr module.
With root.
You can try to unroot with SuperSu, in the settings.
Then either try to install it from market,or flash the super su zip.
Did you wipe system before installing?
As I don't have root problem.
Uncle Lucifer said:
You can just flash Xposed uninstaller, no need to reflash rom.
Gravity is more for aosp, use Serajr module.
With root.
You can try to unroot with SuperSu, in the settings.
Then either try to install it from market,or flash the super su zip.
Did you wipe system before installing?
As I don't have root problem.
Click to expand...
Click to collapse
To be honest it had a bit of panick an hour before leaving for work. Cos the rom went in loop and it wont let me boot into recovery. So I had to use flashtool to hotboot dual recovery and reflash (all just by activating gravitybox in xposed). But now sorted.
Uncle Lucifer said:
You can just flash Xposed uninstaller, no need to reflash rom.
Gravity is more for aosp, use Serajr module.
With root.
You can try to unroot with SuperSu, in the settings.
Then either try to install it from market,or flash the super su zip.
Did you wipe system before installing?
As I don't have root problem.
Click to expand...
Click to collapse
Yeah, no luck in the root dept. ES FILE EXPLORER and ROOT EXPLORER don't have root...I enable root access as Enable Root pop-up appears but nothing happens....I redownloaded rom like 3 times, thinking maybe a bad d/l....cleaned flashed like 5 times still no dice....have no idea why...can't delete system apps or make any modifications...
Sent from my SM-N920G using Tapatalk