Q&A for [ROM][UB][5.1][Weekly-3][XperiaSTE Team] CyanogenMod 12.1
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][UB][5.1][Weekly-3][XperiaSTE Team] CyanogenMod 12.1. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
I'm on CM11 and and can't flash the boot.img of CM12.1. Using Androxyde flashtool. It gives "ERROR - This action can only be done in fastboot mode" and i'm olready in fastboot mode and device is recognized. Any help?
Solved! [emoji123]
Now... auto brightness not working for me. When enable it starts to restart again n again n again...
Recovery?
What do you recommend for installation recovery ?
I was already on CM11 and had the TWRP. Didn't change anything and never had a problem.
i cant setup swap
can you explain your steps? please
thnx for your reply
Weekly 4 seems to be very good
Kozi0 said:
Weekly 4 seems to be very good
Click to expand...
Click to collapse
W4 luminosity adaptation doesnt work. rebooting every mn
Do you mean auto brightness or the manual way?
...
Wifi is ok to me. I guess you did a clean install of the rom. The only problem to me is the auto brightness.
Dialer - calling app is a bit slow when someone calls you.
Want to know the battery life performance ?
Just wanna know the battery life
- With internet (2G/3G/WiFi)
- Without Internet
- Music only
- Average use (a combination of all)
help
I chose silence mode but does not work , ask your help
CM 12.1 - Weekly 6
Is it stable for a daily use? 3G, sms, call, wifi and battery are good? what is F2FS?
ArchiDroid
are you planning add ArchiDroid to your cm 12.1 builds?
Cannot Boot Weekly-6 with F2FS
After enabling F2FS in weekly-6 by following OP instructions phone boots only for the first time with F2FS enabled , but after power off or reboot it does not starts again.
Only solution to flash again boot.img with fastboot, then it boots once again normally and stops on reboots.
If i reflash ROM with EXT4 everything works normally.
Does anyone has the same problem ?
random reboots w6
Anyone facing random reboots in the weekly 6 build? There weren't any random reboots with the previous builds.
CM11 works fine.
Some issues with CM12.x on my Sola:
* SIM is never detected, so it can't be used as a phone, tried all the weekly builds including ArchDroid SlimLP builds, clean or dirty upgrades, ext4 or f2fs, with or without Gapps, removing or adding SIM, nothing helps, it will never detect the SIM.
* plenty of random (soft) reboots
* "Android upgrade" on _every_ (soft)reboot.
Any ideas on how to fix these?
10q
Related
[Q&A] [ROM][4.4.4] [GEEB] Unofficial CM-11.0 - Linaro 4.8, LEDs for E971/3, HDR cam
Q&A for [ROM][4.4.4] [GEEB] Unofficial CM-11.0 - Linaro 4.8, LEDs for E971/3, HDR cam
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.4.4] [GEEB] Unofficial CM-11.0 - Linaro 4.8, LEDs for E971/3, HDR cam. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Just registerd to say thank you for 5.0 android!
Only yours build is working awesome! NFC, camera, battery life is exelect! I'm very glad. One problem is that i can't put some widgets on desktop... it crashes and reappearing without my widget.
Why you didn't update your thread, and what is differences in your build(for exmpl. the 2th of December and the 9-th)?
nikudim said:
Just registerd to say thank you for 5.0 android!
Only yours build is working awesome! NFC, camera, battery life is exelect! I'm very glad. One problem is that i can't put some widgets on desktop... it crashes and reappearing without my widget.
Why you didn't update your thread, and what is differences in your build(for exmpl. the 2th of December and the 9-th)?
Click to expand...
Click to collapse
I haven't gotten to the point with cm-12.0 where I'm comfortable "advertising" it yet. Once I get it building with linaro, and get init.d scripts and some other goodies working I'll do a new thread. As it stands, it's very much the same as brothaedhung's with some extra kernel kangs and some device tree tweaks.
As far as widgets go, I'm not sure as I haven't seen that issue. Could you describe the issue with some more detail, and get a logcat if possible?
Thanks for the kind words though
ronasimi said:
I haven't gotten to the point with cm-12.0 where I'm comfortable "advertising" it yet. Once I get it building with linaro, and get init.d scripts and some other goodies working I'll do a new thread. As it stands, it's very much the same as brothaedhung's with some extra kernel kangs and some device tree tweaks.
As far as widgets go, I'm not sure as I haven't seen that issue. Could you describe the issue with some more detail, and get a logcat if possible?
Thanks for the kind words though
Click to expand...
Click to collapse
Oh, you won't believe I just disable "Don't keep activities" and it works now!!!:laugh:
The problem was when i tried to put Clock for expl. the launcher crashes and appearing again without my widget. Now, i've put my widgets and turn on "Don't keep activities". Perfect! I could not spot any problems, yet!!! Good luck with developing, and thanks again!
ronasimi said:
02/03/2015 - Sorry guys, I've been slacking off on updating this post. All current builds are using my KK kernel brought up for LP, with stock frequencies instead of low_cpuclocks. I'll be posting a new build later this morning. As far as I know, this is the only CM build still using mako sources
Click to expand...
Click to collapse
Noticed this over here after looking in the Canadian section (which has most certainly be dead for a while). Great to see you're still active on this. Just want to make sure before trying this that there's nothing else required to move from KK to LP (assuming not since its on a KK kernel still). Any particular recovery recommended and/or version? I'm on a Bell E973 using PAC 4.4.4-RC2, TWRP 2.6.3.1.
Edit: Decided to update recovery to 2.8.4 from brothaedhung after doing some lurking around. Flashed 02/03 and full stock PA gapps. Everything butter so far. Cheers!
@ronasimi : Latest build is working fine, in call screen is also normal, just sensors not working some times,,
thanks..
Click to expand...
Click to collapse
I have the same issue in your latest CM12. Proximity and brightness don`t work at all. I use jb e970 modem. Don`t flash hybrid radio because I`m in Russia. Also there isn`t any frequence low than 300 Mhz...
And I try your build of CM11: 20141111. There are a lot of bugs:
1. In profiles doesn`t work ring mode "normal". It doesn`t swith to it after another modes (vibrate and mute).
2. Don`t work "Double tap to sleep"
3. In perfomance dont`t work setting minimal and maximum frequency - after rebooting they are turned to default.
I have e970 will it work with this rom?
dro3 said:
I have e970 will it work with this rom?
Click to expand...
Click to collapse
It works. You should give a try to the CM12.1 version. :good::good::good:
ryupunk said:
It works. You should give a try to the CM12.1 version. :good::good::good:
Click to expand...
Click to collapse
I have tried it but my phone gets signal lost many times
"ap watchdog bark detected"
Help!
Since i flashed 12.1 rom, this message with green screen appears frequently!
5.1.1 CM12.1 Unofficial, Watchdog Kenel Panics (green screens)
long post, so if you want the meat of the story scroll down!
hi guys, i'm an avid user of the e970 and i found this marvelous forum to be one of the most useful resources ever. freegee, lgnpst for when i bricked my phone, cm11, cm12, solid geeb kernel, validus, and now cm12.1 unofficial; it's all there. i'm certainly enjoying the experience that this device paired with this community has to offer.
first i'd like to thank the developers, and i'm seriously appreciating the active development on 12.1. i just finished using validus and while it was a much more solid experience than the short-lived cm12, android 5.0 was still killing me in terms of battery life. 5.1 certainly fixed that up though.
i want to second a few observations that are being made, which are the green-screen happenings. i want to mention something in particular though:
when i first flashed 12.1 unofficial i didn't have the recommended gapps at the time, so i flashed the minimal gapps for 5.0 (just to get wheels rolling per se). sure enough, it was a crazy experience. com.google.<insert service name here> was crashing repeatedly, often causing loss of functionality or green-screens. in a day i'd get anywhere between 4 and 7 green-screens (this was for three days, i'm talking about the 4/21 release). i re-wiped and formatted /system and re-installed 4/21 cm12.1, along with the recommended gapps this time.
NOW i'm having far fewer crashes, far fewer slow-downs and stutters; overall a much more lean experience. i also want to especially thank the developer for one thing: THANK YOU, for giving me back HSPA+ speeds on my att jb radio. validus and cm12 for some reason wouldn't give me HSPA speeds, just slow HSPA speeds that would take forever to peak at 200, 250 K/s (averaging around 70 to 140 K/s). now i can enjoy speeds up to 900 K/s (i'll run a speed test when a more stable release comes out)
so, is it gapps or a kernel issue? newer gapps reduced a lot of problems (though that's a given). also i'd like to point out another error: wi-fi. the mac address keeps changing upon reboot, namely the last three hex values. the first three are always 00:11:22. this wouldn't bother a lot of everyday users, but my workplaces utilizes mac filtering (only way around it is to use the battery-intensive 3g option instead, and i have terrible 3g reception at work where i sit; OUTSIDE my office, i get great reception, but it's bloody hot here x.x)
in any event, if someone could help me out or give me some advice that'd be great.
to summarize:
5.0 gapps + cm12.1 = lots of watchdog events
5.1 gapps + cm12.1 = a lot LESS watchdog events, still happening though
wi-fi mac address gets randomly generated at reboot
phone doesn't get detected by the computer on usb unless you leave it plugged in and do a soft reboot (advanced reboot option; common in most cm12.x instances with default kernels; solid geeb was better, and cm11 was flawless pretty much)
using built-in kernel
att jb radio
clockworksmod touch recovery, the last one (6.0.1.8 i think? it's the last one on their website)
4 gig micro sd card is in the slot, if that makes a difference
one more note: i'm having far fewer crashes on this new install maybe because there are only google related apps (other than whatsapp which i installed right away). future planned apps to be installed:
adobe acrobat
battlenet authenticator
es file explorer
facebook messenger
titanium backup
mx player
aedict japanese dictionary
busybox
greenify
orpheus music player
qr code reader
skype
supersu
terminal emulator
any increase in instability henceforth i'll let you know. also for anyone NOT having greenscreens on the e970, do you have whatsapp? if NO, interesting. if YES, still interesting, but please what version? mine's not the latest (yet)
blitz9826
so this is new:
after reaching 100% battery level on charge, the phone used to cool down. ever since switching to this rom, the battery DOESN'T cool down, it stays warm/hot. i know for a fact it's not a charger issue since i'm charging it with the same usb port as i have been in hte past (and every other phone for that matter on the same port)
any ideas?
blitz9826
sensors
Sensors isnt working. 28.04 build.
Will you fix it?
Icons are blurry?
Hey. Loving this ROM so far. Only problem is that the icons are blurry (not HD as usual). I wiped the cache and delvik cache but it's the same problem. Anyone know how to fix this? Thanks.
ronasimi, i am waiting, that you will read this. Please try to fix sensors in your unofficial 12.1 builds. I really want use your rom, but sensors is not working.
I have e970 with mako z30f bootloader, and latest twrp.
Auto rotation
The auto rotation is not working. Only staying in portrait. Can anyone help?
Mobile Data to Wifi Switching
@ronasimi
first of all thanks for the Great rom im using from almost a month with no issues at all.
Just a little question about wifi. Wifi did not connect automatically when my phone is locked. I've to wake it then WiFi connects immediately.
same is when im using mobile data and saved WiFi is in range. but phone will connect it,until i wake the device.
please help me out on this.
[SOLVED] Problems rooting 12.1 E971
Edit: For anyone else facing this issue, flashing the beta version of SuperSU from a custom recovery works.
On a previous 12.0 build I was able to get root just fine, but after clean flashing the latest 12.1 build no method seems to work. I've tried flashing the latest SuperSU update zip from TWRP, using adb to push su and busybox, and using the built in root in developer options.
Flashing the zip and using adb result in SuperSU saying there is no binary installed, and with the root in developer options it never pops up something asking for permission.
Has anyone gotten root on the latest 12.1? Thanks in advance.
Cm 12.1 Bluetooth Issue on E971
Thanks for the great rom. Works great except one minor. Bluetooth connection on and off consistently.
I have cm-12.1-20150521-UNOFFICIAL-geeb.zip rom installed.
Thanks!
Thank you for your hard work on the ROM.
On an E971 with a clean flash, as others above have reported, the sensors/auto rotation are not working.
Another request would be to add repo specifics on your description of the ROM at the start of the thread. You link to your github account where the repos are stored but there are many of them, some with similar names. I am interested in reproducing your build process and possibly contributing some changes, but I am not sure which specific device, vendor and kernel repos you are using to generate the build. Would love to get rotation sorted out and keep development going on this solid 5.1 option for a still capable device.
Still kind of suprised that CM isn't doing 12.1 builds for E973/E971 but it seems they have dropped a large number of phones with the move to 5.0/5.1 and angered a lot of people.
Thanks!
Q&A for [DEV][WIP] Building CM12 for corsica
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [DEV][WIP] Building CM12 for corsica. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
fc
she has that fc problem in applications?
Great work
Did bro use any patches to fix camera and so on?
audio, video camera, called, app not working
Tested it
I tested it and after use adb it can go to desktop but there are many problems:
1) It can't be sleep and if sleep automatic reset
2) Some apps had force closes
3) your known errors
The going sound?
I want to sound, audio
when it is completed?
BUGS
its have a bug with DSP manager also with apollo
wehen i press the sleep button it reboot its sefl(please fix that as fast is possible)
only this bugs i try but im sure there are much other bugs for now UNISTALLING
minimal lolipop gapps
there is already a good minimal android 5 gapps here:
http://forum.xda-developers.com/android/software/gapps-google-apps-minimal-edition-t2943330
I was using this rom about 5 minutes. I have uninstalled it because it's a little slow and audio not working. Fix it, please.
P. S. - Sorry for my bad english, because I'm from Belarus
Sent from my GT-S5310 using XDA Free mobile app
Please fix, its great but too many problems
I like it but it has too many bugs. I switched back to cm 11 with hyper lernel and im waiting for the fix of cm 12, anyway, thanks for making this rom. Well appreciated
Is there any way to stop the restart when the screen shuts down? Anyways, great job! Will use this rom, could be daily if I can get arround the restarting problem
CM12
Will be alpha 2?
cant find the link where is it?
guy, if you only fix the audio of the rom, it will be a wonder. for me no matter if the network and mobile data do not work. waiting stable version. uh, and the rom doesn't restarts when i lock the screen, maybe why i'm using another kernel
When you will upload the build?
When you will upload the build?
Continue development
Would someone take over this development?? Please....
How to fix random reboots in CM12.
I still have bug with reboot.
Please
Where is the new cm12 pocket neo plz it will be very excellent and also if you uploaded the testing zip after fixing camera and wlan
Right guys this is the Q&A thead for the 12.1 roms
ROM thread is HERE
ALMOST no question is stupid, WHEN reporting bugs GIVE LOGS + WAYS TO REPRODUCE IT, please don't say oh me too/+1, produce logs as well, more logs I have the better.
also read the 2nd post line for line for line
Working list
Almost everything on 12.1
GPS is a little broken, it STILL WORKS with google maps and so on, just no actual GPS. Yes you can still find you're way to that girl's place you met on tinder :good:
[Q&A] [ROM] [UNOFFICIAL] CyanogenMod 12 INTERNATIONAL PREVIEW
Q&A for [ROM] [UNOFFICIAL] CyanogenMod 12 INTERNATIONAL PREVIEW
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [UNOFFICIAL] CyanogenMod 12 INTERNATIONAL PREVIEW. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Installation wizard
Lloir said:
sooooo I know a load of you have downloaded this? Any bugs I've not listed?
Click to expand...
Click to collapse
my setup wizard keeps crashing , I can't do anything with the rom
Bugs
Can't rotate screen within apps
---------- Post added at 12:44 AM ---------- Previous post was at 12:32 AM ----------
Capacitive touch does not light up
Experimental Changelog
14/09/15
Updated CM source and added in 93232 106170 109430 109443 109305 109275 109431
REMEMBER THESE ARE ESSENTIALLY PERSONAL BUILDS, THESE DEFIANTLY HAVE NO WARRANTY OR MOANING PRIVILEGES!!
Bugs
Hey There,
I also posted some bugs in the Bug Report Section of this Thread.
I couldn't write into the main thread because of not having enough posts.
I am totally happy with this rom and I would like to thank you for the amount of work you invested into giving my reliable phone new life and i love to use it with your rom.
The things you mentioned are of course correct, but my camera is working, despite of what you wrote in the main thread.
I am using this rom daily and so i will try to add things into the bug section once bugs appear.
Keep up the good work
thedropdead said:
Hey There,
I also posted some bugs in the Bug Report Section of this Thread.
I couldn't write into the main thread because of not having enough posts.
I am totally happy with this rom and I would like to thank you for the amount of work you invested into giving my reliable phone new life and i love to use it with your rom.
The things you mentioned are of course correct, but my camera is working, despite of what you wrote in the main thread.
I am using this rom daily and so i will try to add things into the bug section once bugs appear.
Keep up the good work
Click to expand...
Click to collapse
Yeah I saw a couple.....
Camera doesn't work for me as well
Gaps
What Google Apps put on this ROM?
link please
@Lloir
Are you planning an aosp rom?
I'm just dubious about cyanogenmod after the 1+1-cyanogen fiasco.
Thank you.
shreyanshk said:
@Lloir
Are you planning an aosp rom?
I'm just dubious about cyanogenmod after the 1+1-cyanogen fiasco.
Thank you.
Click to expand...
Click to collapse
HAH, don't worry OmniRom is going to be my mostly maintained rom.
Hi Lloir, sorry for my english (I'm from Russia). You will not tell me how to fix the translation (in the settings in Russian is not written anywhere). I have another problem: How can I disable the flashing of the touch buttons when I receive a notification when the screen is locked?
Flatron96 said:
Hi Lloir, sorry for my english (I'm from Russia). You will not tell me how to fix the translation (in the settings in Russian is not written anywhere). I have another problem: How can I disable the flashing of the touch buttons when I receive a notification when the screen is locked?
Click to expand...
Click to collapse
You are going to have to wait until translations are pushed up dude....You can start contributing translations though : https://crowdin.com/project/cyanogenmod
and what I do whit the flashing backlit keys when i get notification when display is off?
cyanogen mod 12, 5.x lollipop
Hi everyone,
first of all hearty thank's for developers who are working and giving everything for making ROM's available for devices for which the company has stopped providing any updates,
- i am using HTC One X +, and i have been able to unlock and root my device and installed TWRP Recovery successfully.
- i am now planning to install cynogen mod cm-11-20150308-NIGHTLY-enrc2b.zip, can any one provide me with any special instructions for starting this operation, like can i install this zip directly with TWRP, any special instructions.
- i am totally impressed with the look and feel of android lollipop version. which i have seen on lot of devices.
- is there been any development on cyanogen MOD 12 Lollipop version for HTC ONE X +, and if it is available can anyone please provide me a link for installation.
Thanks & Regards everyone.
not install
tried but could not. When you reboot into recovery , then , can not access system
RobinNhan said:
tried but could not. When you reboot into recovery , then , can not access system
Click to expand...
Click to collapse
you need to use TWRP 2.8+
QA Bot said:
Q&A for [ROM] [UNOFFICIAL] CyanogenMod 12 INTERNATIONAL
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [UNOFFICIAL] CyanogenMod 12 INTERNATIONAL PREVIEW. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Click to expand...
Click to collapse
feature request: wiimote support
http://review.cyanogenmod.org/#/c/89843
Hey Lloir,
Installed the latest build, it's working great so far.
Three things I noticed :
1. Sometimes the phone is slow for around a minute or two after waking it up (it starts working properly again eventually).
2. USB storage is not always recognized by the PC (I have to plug/unplug a few times).
3. Can't copy files to storage/emulated/legacy (I had to copy Titanium back-ups elsewhere and use a custom path to restore apps). Also, when trying to access from device, it's password protected.
Other than that, everything works great. Thanks for bringing 5.0 to the One X+.
Q&A for [ROM][Redmi 2][18/07] CyanogenMod 11.0
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][Redmi 2][18/07] CyanogenMod 11.0. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Thanks for you ROM.
The compass is not working,the address list*can not read SIM.
Looking forward to your updates.
Thanks.
Why r u disabled zram
Recording problem
Somehow i tried to message my friend using WhatsApp and bb messengger.. and when i start recording. all the apps force close and the camera had the same problem. it can record video but the audio doesn't recorded.. .. and i'm using HM2014813.
I like this rom build. it's simple and save a lot of storage space.. hehe
LINE app can't access wifi.
I have installed cyanogenmod 11(http://forum.xda-developers.com/android/development/hm201481x-cyanogenmod-11-0-t3159419) on redmi 2(HM2014818) and most of the apps are working fine. Only LINE app can't access wifi Internet. It works fine with mobile data.
Any solution?
Thanks.
Hi
Hi newbie here! Does the Latest CyanogenMod for Redmi 2 covers all feature from the earlier CyanogenMods?
Same Question with the Gapps..
Many Thanks!
dual simcard function works in this rom? thanks.
Proximity sensor not working.
I installed cyanogen (25/07) but proximity sensor is not working and screen remains off for around 30 seconds . Even pressing power button doesn't switch on the screen for this period.
I am using redmi2(xxxxxxx18) that is indian version.
QA Bot said:
Q&A for [ROM][Redmi 2][18/07] CyanogenMod 11.0
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][Redmi 2][18/07] CyanogenMod 11.0. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Click to expand...
Click to collapse
after flashing the latest cyanogenmod v11 my phone is taking forever to boot and still booting since last night, any help ? also its my first time flashing the mod into my redmi 2 (1GB ram 8GB internal)
I just installed this afternoon, rom is very comfortable and stable when used. but I have a suggestion, please optimize all aspects ranging from the speed, performance, stability and others, I hope you take my advice...
Thank you very much for your hard work, Good Job!
Hi, since I installed CM11 on my redmi 2 (just upgraded to latest version) GPS is not working anymore. It just doesn't find any satellites.
2g/3g/4g toggle not working
and btw thanks for this
Ram
Can you make a total of ram on redmi 2 to ~914MB as it exists in the moto e 2nd generation or higher value?
Hi, a friend from HTCMania recommended this rom and runs nicely in mi Redmi 2
But i need Lockscreen Notifications... Pls
PD: If you have a source Kernel from Redmi 2 working, that means that a CyanogenMod 12.1 (Android 5.1 Lollipop ROM) is coming to our Mis ?
Thank you our HERO!
so will there be any cm12.1 build?
Any possibility?
zwliew said:
Good news guys, thanks to @REAL_BALIKA011, we managed to get an almost fully working kernel built from source. Only a few quirks here and there, but it is pretty much fully working. New build coming soon.
Click to expand...
Click to collapse
Is there any possibility that your next build with that kernel will be based on cm12?
stable
I am using this rom about a week, this ROM is very stable. best stable ROM. guys must try this one.
thankyou
thankyou
Black screen
Hello,
I flashed this ROM last weekend. Full wipe before the flash. This one runs smoother than other CM11 or MIUI ROM, that's a fact! Thank you for that.
However I encounter some "black screen" issues. Sometimes, for no reasons, the screen goes black and I have to hard reset the phone to get it working again. The LED lighting is still functionnal when the screen goes black.
I already tried to get some logs but it seems that the logs are wiped when the device is restarted. If you can tell me how to get you some logs, I'll do it. For now I will reflash it without the Google Apps to see if the problem occurs again.
[Doublon]
[Q&A] [ROM][5.1.1] [DIRTY-UNICORNS v9.5] [Unofficial-Builds] [OC/TRIM] [OTA] [26/07/
Q&A for [ROM][5.1.1] [DIRTY-UNICORNS v9.5] [Unofficial-Builds] [OC/TRIM] [OTA] [26/07/2015]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.1.1] [DIRTY-UNICORNS v9.5] [Unofficial-Builds] [OC/TRIM] [OTA] [26/07/2015]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Hello People! i have two problems, i am try to use titaniun backup v.6.1.5.4 but the app dont obtain root acces ( with KK slimsaber never have this issue), the app tell me that she try with the command "/system/xbin/su" in the error msg, my other problem, LuckyPatcher alert me when try patch some app : "root not stable, try again or update your root" , thx for the support , sry for the bad english.
HOW TO DISABLE HARDWARE BUTTON 's LIGHT ???
i want to disable H/W button's light.
Can i disable it ?
HOW TO DISABLE HARDWARE BUTTON 's LIGHT ???
Hi
Can you make volume control in kernel auditor?
Hii
Ur rom is faabbb
New Synapse app added for universal kernel control.
arnab helllp
arnab please help my problem is when I flash the rom through compaitaple recovery it stuck at du logo patching system unconditionally I tried every thing but norhing work note: I am an expert in flashing rom so do not tell me that you don't know how to flash a rom.
I really need your help man really apprecieted any respond.
fir1996 said:
arnab please help my problem is when I flash the rom through compaitaple recovery it stuck at du logo patching system unconditionally I tried every thing but norhing work note: I am an expert in flashing rom so do not tell me that you don't know how to flash a rom.
I really need your help man really apprecieted any respond.
Click to expand...
Click to collapse
Check md5...had the same problem with an other guy. Flash the kernel tar from 3rd post using odin..and then flash the rom using twrp.
I have already read it and try it but nothing work also where is the md5 file I can't find it thanks for you fast respond it just stuck at DU logo I have flash the kernel, pit file nothing work I really like your work thanks
Dirty unicorn v9,5 for galaxy s2
superbly done... smooth, clear, fantastic .... except app force closes sometimes on its own... hope things will be rectified in the upcoming updates
nice to see my S2 so smooth after the samsung stock rom...
thanks,
regards.
*alarm* wakelock
Thanks for such smooth and customizable rom but i'm facing with *alarm* wakelock coming from android system. Sync and other stuff always off. ROM was installed with full wipe. No extra apps installed. How to fix this wakelock?
why my 2 core always on ?!!
Getting Cell Broadcast notifications all the time, had to remove the rom because of it, hope it gets fixed in the future
Got some errors on the last ROM build:
1. "Unfortunately, Setting has stopped" when pressing Dirty Tweaks.
2. App ops in Settings - Security also force closes (fc only when system language is Russian).
@arnab,
did you use default kernel or your custom one to obtain 3 days of phone usage?
vyrussu said:
@arnab,
did you use default kernel or your custom one to obtain 3 days of phone usage?
Click to expand...
Click to collapse
custom one.
Weird wakeups
I attached a screen shot below, I'm getting these wakeups since the new build, can anyone tell me what are they for?
P.S.: thank you for this awesome rom.
Hi arnab,
I wanna test your custom kennel with trim support with Lysergic rom.
Any kind of advice? can I flash your kernel with unofficial ?
Next rom to test will be DU [emoji6]
Thanks in advance sir!
S2 LA Cyanogenmod 5.1.1 [unofficial] [06/17] - Xposed [unofficial romracer's framework] - [rovo's beta 4 apk] - Viper4Android
makix13 said:
Hi arnab,
I wanna test your custom kennel with trim support with Lysergic rom.
Any kind of advice? can I flash your kernel with unofficial ?
Next rom to test will be DU [emoji6]
Thanks in advance sir!
S2 LA Cyanogenmod 5.1.1 [unofficial] [06/17] - Xposed [unofficial romracer's framework] - [rovo's beta 4 apk] - Viper4Android
Click to expand...
Click to collapse
It wont work with CM coz CM has differnt ramdisk.
good rom ... but have one bug ... lockscreen