Ok so I have a kindle fire hd 6 16 gig rooted and I changed the launcher on it and deleted the old one anyway latter the wifi messed up and I factory reset it thinking I could just do it all again but in doing so I deleted my launcher and my kindle will only boot but never get past the fire screen when I try connecting it to a computer the computer only try's charging it but won't lshow any devices are plugged in If I can get my computer to recognize it I can fix it
Related
I have looked over all the other threads and nothing has worked. I will start by telling you what *I* did to my Kindle Fire like an ass. I decided I wanted to root my Kindle Fire, and thought how hard could it be? Well I did it, and was very proud of myself. I used twrp. Then, I decided last night to put the old Kindle Fire stuff back on. I used twrp again.
Now my computer won't recognize my Kindle. I have tried everything...uninstalling drivers for usb, restarting the computer. Everything. A couple of times it did find it, but now it won't.
My Kindle Fire starts, shows Logo, then goes to the screen that you swipe to use your Kindle. When that opens, it immediately says android.process.acore has stopped unexpectantly. I click that to close it, and immediately after that it says somthing about the calender stopping and has to force close. Then it starts all over with the Kindle Fire Logo. Now it seems to be just going through it all by itself, logo, start screen, logo, start screen without me touching it.
I cannot get into twrp, because I suppose I wiped it clean putting the old system back on.
I am a ding dong, I am fully aware...but it seems I always have to try something myself and then I almost....ALMOST always get stuck. Please help me. Please.
I have restored my KF a number of times via TWRP from a basic backup and TWRP didn not get re-written although the Bootloader got screwed. So perhaps FireFireFire needs to be reinstalled from the Kindle Fire Utility. See if the KFU can install the drivers so you can have access to adb. Here is a link to the utility:
http://db.tt/v2AwiXjg
I would try to use the KF Utility to reinstall FireFireFire and get access to that Bootloader so you can use the power button to select the restore option. If you can reach restore mode, restore your original backup to see if your problem happens again.
Also before doing this, see if you can pull your backup off the KF using adb in case you have to go through the entire KF utility and have to reinstall TWRP. Afterwards, use adb to push it to the TWRP folder
I have not used this before but here is a link to an unbrick utility for KFs:
http://db.tt/lse1DRiV
Best of luck.
Sent from my Mid-9000 using XDA Premium HD app
Sent from my Mid-9000 using XDA Premium HD app
I follow some instruction on internet and after the wipe step on safestrap, my kindle is completely dead now. it wouldnt turn on anymore, keeping showing the kindle fire logo. I think It's been erased !
Are there anyway i could revive my kindle or is it ready to be thrown away ?
Please help. Thanx !
i have a similar problem, after a wipe data factor reset from safestrap and then flashing the thor gapps rom and making sure the rom slot was active(not the stock rom slot) but the rom slot that i flashed the thor gapps rom on and ,,,i rebooted the device as usual but it only booted to the grey kindle fire splash screen so i held the power button until it booted again but only going to the grey kindle fire splash screen again,,,so i tried to boot it to safestrap recovery using the volume buttons but it would only boot to kindle fire factory recovery,so i rebooted the kindle from there and back to the grey kindle fire splash screen it went, so i rebooted in to kindle recovery because safestrap was not coming up and it would only go to kindle recovery,so i hit the return the kindle to factory settings and when it was done it went back to grey kindle screen and thats all it will do,,,,when i plug it up to windows i get mtp in device manager,but the driver has an error saying device can not start error 10
and when i plug it up in ubuntu 12.04 and run lsusb in the terminal it comes up with an id and says Google Inc. but i can't get adb to recognize the kindle,,, i even checked adb with another android device to make sure it is all setup right and it worked,,,, i have read a few times in the forums here that you have recovered this device from many types of bricks and feel that if the grey kindle fire logo/splash screen is coming up that there is hope to get adb working,,,
any help is greatly appreciated and thanks in advance !!!!
oh and it's the kindle fire hdx 7 in tab
Hi everyone. I have a strange problem with my Kindle Fire HDX 8.9. It downloaded the software upgrade, but it won't upgrade. Yesterday the device shut down and rebooted in fastboot, than it was completly died. I can't boot it. If I connect with USB cable I get: QHUSB_BULK. The kindle wasn't rooted. The display is black, there isn't Kindle Logo.
Sorry for my bad english
danielemoore said:
Hi everyone. I have a strange problem with my Kindle Fire HDX 8.9. It downloaded the software upgrade, but it won't upgrade. Yesterday the device shut down and rebooted in fastboot, than it was completly died. I can't boot it. If I connect with USB cable I get: QHUSB_BULK. The kindle wasn't rooted. The display is black, there isn't Kindle Logo.
Sorry for my bad english
Click to expand...
Click to collapse
Press and hold power button for 20+ seconds to see if you get a response. Make sure you have a full charge (any response to the charge cable?). Could be a hardware problem but more likely a botched upgrade. If the device is still under warranty reach out to Amazon. They are pretty good about replacing faulty devices.
I'm in the same boat as the OP.
I have a botched upgrade and Safestrap seemed to got formatted.
Stuck in BULK mode using a Fastboot cable with no ADB access. I can also get to the grey logo screen that prompts for a Factory Reset or Reboot but nothing happens there either.
Am I SOL?
Well I have the same problem in my HDX 7.
I downgraded from 4.5.3 to 3.2.4 because I wanted to root the device.
The installation was successful and my kindle rebooted just fine....I started to download some apps from store....I left the device for 10 minutes closed not turned off and when I came back to open it not to turn on the screen was black and none of the buttons where responding...I tried every combination of buttons but didn't work...My pc recognize it as QHSUSB_BULK...I found the correct drivers and now I can connect it to PC but only in QHSUSB_BULK mode...
It's not rooted,
doesn't have safestrap installed
it doesn't reboot in stock recovery and
It doesn't have warranty cause is outdated
Thanks in advance
Supernova 21 said:
Well I have the same problem in my HDX 7.
I downgraded from 4.5.3 to 3.2.4 because I wanted to root the device.
The installation was successful and my kindle rebooted just fine....I started to download some apps from store....I left the device for 10 minutes closed not turned off and when I came back to open it not to turn on the screen was black and none of the buttons where responding...I tried every combination of buttons but didn't work...My pc recognize it as QHSUSB_BULK...I found the correct drivers and now I can connect it to PC but only in QHSUSB_BULK mode...
It's not rooted,
doesn't have safestrap installed
it doesn't reboot in stock recovery and
It doesn't have warranty cause is outdated
Thanks in advance
Click to expand...
Click to collapse
let me add myself in the same queue unfortunately :/
got my kindle hdx 7" bricked and now nothing goes ahead of the booting screen dooooh
I am having an issue. Updated kindle fire 6 hd 4th gen to 5.0, downgraded to 4.5.3. Installed king root, rooted device, installed flashify, flashed openrecovery-twrp-2.8.6.0-ariel.img, rebooted. Now I am stuck rebooting . If plugged into a computer loads to the amazon logo, shuts down, loads to the logo repeat.
I have tried to fast boot by correcting drivers in device manager for the mtp whatever and constantly spamming the fast boot string.
I have used adb to see if a device ever loads and it doesn't.
Windows makes the sound that a new device is connected for about 15 seconds then will make the noise that a device has been disconnected as the fire reboots. I want to say it is a soft brick since it attempts to load and is communicating with windows to some degree. I have searched for two days and tried KFFA and an assortment of other tools. Any thoughts or assistance is greatly appreciated. It was only 60 bucks so not really worth sending it in to someone for repair. Also since it was brand new amazon is sending a replacement so this thing is now simply a toy to learn on.
When it can't get past the Amazon logo, there is no hope. OS 4.5.3 should be able to boot TWRP after OS 5.0. Where did you get the 5.0 file? Is it possible you got updated at some point?
ardorcalenture said:
I am having an issue. Updated kindle fire 6 hd 4th gen to 5.0, downgraded to 4.5.3. Installed king root, rooted device, installed flashify, flashed openrecovery-twrp-2.8.6.0-ariel.img, rebooted. Now I am stuck rebooting . If plugged into a computer loads to the amazon logo, shuts down, loads to the logo repeat.
I have tried to fast boot by correcting drivers in device manager for the mtp whatever and constantly spamming the fast boot string.
I have used adb to see if a device ever loads and it doesn't.
Windows makes the sound that a new device is connected for about 15 seconds then will make the noise that a device has been disconnected as the fire reboots. I want to say it is a soft brick since it attempts to load and is communicating with windows to some degree. I have searched for two days and tried KFFA and an assortment of other tools. Any thoughts or assistance is greatly appreciated. It was only 60 bucks so not really worth sending it in to someone for repair. Also since it was brand new amazon is sending a replacement so this thing is now simply a toy to learn on.
Click to expand...
Click to collapse
You probably Flashified TWRP into your boot partition (instead of recovery). Since TWRP not signed, it will not boot. You can probably get into 4.5.3 recovery by pressing Pwr + Vol+ during boot, but that's not going to do you much good. Anyway, if Amazon can get you a replacement, go for it!
DoLooper said:
When it can't get past the Amazon logo, there is no hope. OS 4.5.3 should be able to boot TWRP after OS 5.0. Where did you get the 5.0 file? Is it possible you got updated at some point?
Click to expand...
Click to collapse
When I say 5.0 I am talking generic. I updated it to that version in order to downgrade the OS.
bibikalka said:
You probably Flashified TWRP into your boot partition (instead of recovery). Since TWRP not signed, it will not boot. You can probably get into 4.5.3 recovery by pressing Pwr + Vol+ during boot, but that's not going to do you much good. Anyway, if Amazon can get you a replacement, go for it!
Click to expand...
Click to collapse
Yeah I tried that. I get reboot or erase everything and restart. Neither works.
My HDX boots but won't go past the animated Kindle Fire logo.
I can access (stock) recovery and do a factory reset (which didn't help at all, I must add)
I tried draining down the battery (still didn't help)
The bootloader is locked, no custom recovery, stock ROM.
The microUSB port has a bent pin (which I haven't gotten around to fixing yet) so I haven't tried ADB/fastboot as of yet.
Is there any hope for me?