[MOD] [HOW-TO] Create Your Own Splash Screens [S-OFF][Custom in Post 2] - Sprint HTC One (M9)

Splash Screen Creation!!!
I have unlocked bootloader and S-OFF. (The attached android-info.txt is for the SPRINT Variant only)
per usual, not responsible for bone-headed ness
3.41.651.4 base img's in post #2, more to come if requested
You will need:
benny3's Image Converter (extracted in a project folder)
an image in the dimensions of 1080x1920 (can be .png, .jpg, .bmp)
1.32.651.30 firmware View attachment android-info.txt [ see post 6 for updated file to create your own splashes ]
**optionally** Photoshop, GIMP, Paint (I guess this could work. eek)
Steps to make your HTC One not blind you upon a restart...
Edit photo to liking
MAKE SURE IMAGE IS THE CORRECT SIZE ---> [ 1080x1920 ] <---
Open benny3's converter FOLDER, copy image to the 'place-image-here' folder
Run CLICK-HERE.BAT
Convert .jpg (.bmp, .png) to .img, close upon completion
copy custom.img(from place-image-here folder) to Project Folder, rename file to splash1.nb0
copy android-info.txt to same Project Folder
Zip/Archive these two files (I use winRAR), archive format MUST be .zip
Copy ProjectFolder.zip to sdk directory (wherever your fastboot command is located)
Reboot into Download Mode
type: fastboot devices (make sure device is attached)
type:
Code:
fastboot oem rebootRUU
fastboot flash zip ProjectFolder.zip
fastboot reboot
Enjoy
(Too hard to follow? Here's a video that might help!)
https://youtu.be/EpxvJozVB2U
Thanks to @schmeggy929, @SoLdieR9312, @benny3 for the tool and the community for the information :good::good:

Splash Screens for SPRINT Users
This is for the 3.41.651.4 firmware base
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
View attachment GoogleBlack.zip
View attachment HTCRain.zip
View attachment Shark.zip
View attachment Space.zip
This is also for original firmware base
---(Might take requests, if I have time, I'll make them if this guide is too hard for you...)---
---Circuit splash---
View attachment circuit.zip
---Abstract---
View attachment abstract-colors.zip
---Earth---
View attachment black-earth.zip
per usual, not responsible for bone-headed ness.
place zip in fasboot folder, reboot in download mode.
Code:
fastboot oem rebootRUU
fastboot flash zip [B]xxxx.zip[/B]
fastboot reboot
"xxxx.zip" is whatever the filename is

Great write up! Thanks

Update for 3.33.651.2
For those of you on 3.33.651.2 base
(if you flashed the 'Sprint M9 Android 6.0 Leak' from http://forum.xda-developers.com/sprint-one-m9/development/sprint-m9-android-6-0-leak-t3285258)
updated android-info.txt... View attachment android-info.txt
some img's you can flash (I uploaded a working red text removal over here: http://forum.xda-developers.com/showpost.php?p=64709179&postcount=42)
for reference, place .zip into adb/fastboot directory, then reboot into download mode and execute this
Code:
fastboot oem rebootRUU
fastboot flash zip [I][B]xxxx.zip[/B][/I]
fastboot reboot
--Images--
View attachment Rainbow.zip
View attachment GoogleBlack.zip
View attachment MountainBlack.zip
View attachment Nebula.zip

awesome brotha works good here on new sprint leak fw
awesome work man, you should put a few more details and versions out this will become pretty popular, e.g. one that says s-On no red txt Locked, then one with just red txt removed etc... cheers!

For the new 3.41.651.4 base
updated android-info.txt... View attachment android-info.txt
Added new splash screens to fastboot in Post 2, requests if I have time

predator1584 said:
For the new 3.41.651.4 base
updated android-info.txt... View attachment 3637878
Added new splash screens to fastboot in Post 2, requests if I have time
Click to expand...
Click to collapse
Thanks, worked great on new 3.41.651.4 base - I have been using a breaking bad splash since m7 days.

sim-x said:
thanks, worked great on new 3.41.651.4 base - i have been using a breaking bad splash since m7 days.
Click to expand...
Click to collapse
Here's a couple that might suit your fancy... Bored today :good:
View attachment BreakingBadGOT.zip
View attachment Heisenberg.zip

For 4.27.651.4 sprint do i change hbootpreupdate to 4?

Here's a custom one for ViperOne rom on 4.27.651.4

Related

[IMG/Splash/LDPI][19.01.13Update]Splash Screens + How to make one

here are some splash screens made by me. enjoy
19.01.13Update: new splash screens
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tips: You need S-OFF
Make a Nandroid Backup
USE THIS AT YOUR OWN RISK
How to apply: Extract the zip and choose splash1.img
1: Using Fastboot Commander: reboot in bootloader navigate to splash in Fastboot Commander choose the splash img then flash it
2: Using adb: place the splash1.img in sdk\tools, reboot in bootloader then type "fastboot flash splash1 splash1.img"
How to make a splash: First you need to resize the pic to 240x320 then save it as bmp, i use fastboot comander for making the splash its the easy way, download the program go on the splash tab click splash choose your pic and a window will popup asking you if this is the pic you want click yes, a file .nb will appear in the folder where your pic is stored,you can rename it to splash1.img and you are done.
hit the Thanks button if you enjoy them ;]
Downloads:
Abstract
Thanks bro looks good
Sent from my HTC Wildfire using XDA Premium App
ur welcome :]
great work mate...
can u plz tell me how to create a splash img???
thnx in advance...
first you need to resize the pic to 240x320 then save it as bmp, i use fastboot comander for making the splash its the easy way, download the program go on the splash tab click splash choose your pic and a window will popup asking you if this is the pic you want click yes, a file .nb will appear in the folder where your pic is stored,you can rename it to splash1.img and you are done
Thank you very helpful
Sent from my HTC Wildfire using xda premium
really nice ones, keep up the good work!
Can someone please tell me how do I actually utilize these awesome .apk files on my phone? I have transferred them to my device, but how do I set it as my theme/wallpaper? Do I need some software?
Thanks.. a newbie here!
very nice splash screen! and thanks for the tutorial on how to make one..
not bad, thanks
how to install this?cant get it work..sorry for being noob
ijestan said:
how to install this?cant get it work..sorry for being noob
Click to expand...
Click to collapse
Did you try and read the first post? There are three ways explained there:
How to apply: extract the zip and choose PC49IMG or splash1.img
1: Using Fastboot Commander: reboot in bootloader navigate to splash in Fastboot Commander choose the splash img then flash it
2: Using adb: place the splash1.img in sdk\tools, reboot in bootloader then type "fastboot flash splash1 splash1.img"
3: Using PC49IMG.zip: place the zip it the root of your sd card reboot in bootloader then press volume up to apply.after flashing move it to a folder
Click to expand...
Click to collapse
You have to be S-OFF in order to use these. Else it will not work
i have cm7 rom, i tried the third procedure, nothing happens
edit: update read the first post
Sorry to ask this but trying to resize a image and then convert to .bmp. what program do you guys use?
paint or gimp
Hi thanks just did one with paint. It's been a while since I've done anything with images lol
how to s-off?????
ijestan said:
how to s-off?????
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1029318
thank you guy! looks so awesome

[Porting] How to and bootanimation porting for hvga phones

Introduction:
This a porting of booting animations present in the forum, for 320x480 resolution phones.
All files are flashable via recovery
Bootanimations:
Alice
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download
Android Love
Download
Andromeda
Download
Apple Destroy
Download
Cyano
Download
FlamingBlueSkull
Download
FinalHavocII
Download
GearsIII
Download
GingerSkeleton
Download
Hungry
Download
ICSNPrime
Download
JollyRoger
Download
Liquid
Download
Lord Of Rings
Download
Silver
Download
SpeedoII
Download
Trapcode
Download
Xda
Download
Tutorial:
Linux
Needed:
Imagemagick (it will resize multiple files in a shoot)
Zip editor/creator
Gprename (renaming multiple files ; optional)
How to:
Open your bootanimation.zip and extract folders containig images (they took name of part0, part1...)
Install imagemagick
sudo apt-get install imagemagick
Click to expand...
Click to collapse
Resize pictures within part folder
cd <directory in which you have images to modify>
mogrify -resize 320x480 -format jpg * (it will keep original aspect ratio)
mogrify -resize 320x480! -format jpg * (images will have selected aspect ratio)
Click to expand...
Click to collapse
Open bootanimation (without exctract anything), maybe using 7zip, and add the new folder you modded before (7zip will automatically overwrites it for you if needed). Don't close your zip file. Open desc.text and modify values as in pictures.
Updated file after saving and close
Windows
Needed:
A zip manager
A note manager (as Notepad++)
How to:
Right click on your bootanimation and exctract it
Change your images size (PIXresizer should be useful for this)
Open your desc.text file with blocknotes or notepad++
Change values as in pictures
Check all your file are in order and in the right place
Make your modded bootanimation.zip file using store compression method
Thanks to all the guys who made these animations
I can flash the bootanimacion on clockwork mod ????
Peppoid said:
Introduction:
This a porting of booting animations present in the forum, for 320x480 resolution phones.
All files are flashable via recovery
Bootanimations:
Alice
Download
Android Love
Download
Andromeda
Download
Apple Destroy
Download
Cyano
Download
FlamingBlueSkull
Download
FinalHavocII
Download
GearsIII
Download
GingerSkeleton
Download
Hungry
Download
ICSNPrime
Download
JollyRoger
Download
Liquid
Download
Lord Of Rings
Download
Silver
Download
SpeedoII
Download
Trapcode
Download
Xda
Download
Tutorial:
Linux
Needed:
Imagemagick (it will resize multiple files in a shoot)
Zip editor/creator
Gprename (renaming multiple files ; optional)
How to:
Open your bootanimation.zip and extract folders containig images (they took name of part0, part1...)
Install imagemagick
Resize pictures within part folder
Open bootanimation (without exctract anything), maybe using 7zip, and add the new folder you modded before (7zip will automatically overwrites it for you if needed). Don't close your zip file. Open desc.text and modify values as in pictures.
Updated file after saving and close
Windows
Needed:
A zip manager
A note manager (as Notepad++)
How to:
Right click on your bootanimation and exctract it
Change your images size (PIXresizer should be useful for this)
Open your desc.text file with blocknotes or notepad++
Change values as in pictures
Check all your file are in order and in the right place
Make your modded bootanimation.zip file using store compression method
Thanks to all the guys who made these animations
Click to expand...
Click to collapse
PIXresizer can work with multiple file but if multiple it can't be costumized resolution...
if single file it can...
but change one by one is so tired..
EDIT:
i've found a software for windows for change resolution and that easy to use it..
here is the link http://www.vso-software.fr/products/image_resizer/
please press thanks if i help..
Thanks
multiupload seems to be down.
could anyone upload the bootanimations GearsIII and JollyRoger, please?
Untot said:
multiupload seems to be down.
could anyone upload the bootanimations GearsIII and JollyRoger, please?
Click to expand...
Click to collapse
Here you go dude.
Bye
i want hungry & finalhavoc please... multiupload its down
Someone should please help us upload tha bootanimations here.... Nice thread!!!
All links are fixed
MultiUpload seems to be online again
Peppoid said:
All links are fixed
MultiUpload seems to be online again
Click to expand...
Click to collapse
The are down again!
hey, can you reupload the "hungry" boot animation please? o:

Bootanimation collection + Bootsounds

I want to offer you here self created boot animations.
There are all adjusted for the Note 2 (resolution 720 X 1280).
On request I can adjust the resolution for other devices.
If it is possible for me, I can try to take requests for special animations as well.
The preview (.gif files) are shown reduced in size and compressed. For this, the quality of the preview may vary from the actual boot animation.
There are also some bootanis with different parts, in some of those bootanis (f.e. C64, Android Skater) the last part runs in a continuous loop. This is not shown in the .gif preview.
How you will get the boot animation to run on you rom, depends on your used rom.
For tw roms 4.4.2:
You have to download this file: View attachment bootanimation-enabler.7z then unpack it and copy and overwrite ´the "bootanimation" file to system/bin (you may backup the old "bootanimation" file first, but then you have to take care to set the permissons to -rwxr-xr-x)
Next you rename your downloaded "bootanimation-xxxx.zip" you want to install to "bootanimation.zip"
Now you copy the just renamed "bootanimation.zip" to system/media and set permissions to -rw-r--r--
reboot
For tw roms 4.3:
Flash this file: View attachment CWM_CustomBootanimation_43_Enable.zip with recovery.
Next you rename your downloaded "bootanimation-xxxx.zip" you want to install to "bootanimation.zip"
Now you copy the just renamed "bootanimation.zip" to system/media and set permissions to -rw-r--r--
reboot
For tw roms until 4.1.2:
„betoNL“ wrote a nice tutorial for that. :good:
For some bootanimations, there are bootsounds aswell:
Download the "PowerOn-xxx.7z" of your choice, unpack it and rename the .ogg file to "PowerOn.ogg".
Overwrite it to: system/media/audio/ui (maybe you want to backup the old "PowerOn.ogg" first)
Set permissions of "PowerOn.ogg" to -rw-r--r--
​
If you want to create a boot animation yourself, there is also a great guide from „<JohnCarter>“.:good:
Bootanimation's​
Back fRomFuture (exclusively made for fRomFuture Rom from Blackball)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Bootanimation: bootanimation-Back-fRomFuture.zip Bootsound: PowerOn-Back-fRomFuture.7z
Android Feedback
Bootanimation: View attachment bootanimation-android-feedback.zip
20th Century Android
Bootanimation: View attachment bootanimation-20th-android.zip Bootsound: View attachment PowerOn-20thAndroid.7z
20th Century Android Twisted
Bootanimation: View attachment bootanimation-20th-android-twisted.zip Bootsound: View attachment PowerOn-20thAndroid.7z
Star Wars
Bootanimation: View attachment bootanimation-starwars.zip Bootsound: View attachment PowerOn-starwars.7z
Note 2 - X-Ray
Bootanimation: View attachment bootanimation-xray.zip
Android Skater
Bootanimation: View attachment bootanimation-android-skate.zip
C64
Bootanimation: View attachment bootanimation-c64.zip Bootsound: View attachment PowerOn-c64.7z
More to come.....
Heartbeat Slimline (exclusively made for Slimline Rom from Blackball)
Bootanimation: View attachment bootanimation-heartbeat.zip Bootsound: View attachment PowerOn-heartbeat.7z
...
think it will work like this. did not tryed it myself, because still on 4.3
can anyone report if this is the way?
For "Kit Kat TW Rom"
You have to download this file: View attachment bootanimation-enabler.7z then unpack it and copy and overwrite ´the "bootanimation" file to system/bin (you may backup the old "bootanimation" file first, but then you have to take care to set the permissons to -rwxr-xr-x)
Next you rename your downloaded "bootanimation-xxxx.zip" you want to install to "bootanimation.zip"
Now you copy the just renamed "bootanimation.zip" to system/media and set permissions to -rwxr--r--
reboot
mikeheissen said:
think it will work like this. did not tryed it myself, because still on 4.3
can anyone report if this is the way?
For "Kit Kat TW Rom"
You have to download this file: View attachment 2750818 then unpack it and copy and overwrite ´the "bootanimation" file to system/bin (you may backup the old "bootanimation" file first, but then you have to take care to set the permissons to -rwxr-xr-x)
Next you rename your downloaded "bootanimation-xxxx.zip" you want to install to "bootanimation.zip"
Now you copy the just renamed "bootanimation.zip" to system/media and set permissions to -rwxr--r--
reboot
Click to expand...
Click to collapse
worked :victory:
Added new animation and some bootsounds.
fRomFuture Bootanimation's
Here is a bootanimation i made exclusively for fRomFuture Rom from Blackball
Bootanimation: View attachment bootanimation-Back-fRomFuture.zip
Bootsound: View attachment PowerOn-Back-fRomFuture.7z
And here some individual changed bootanimations for the fRomFuture Rom:​
20th Android - fRomFuture Version:
Bootanimation: View attachment bootanimation-20th-fRomFuture.zip
Bootsound: PowerOn-20thAndroid.7z
C64 fRomFuture:
Bootanimation: bootanimation-c64-fromfuture.zip
Thanx, works just fine (DN3)...

[New] Android Marshmallow [BootAnimation] for Moto G 2014 [Flashable] Zip

Flashable Bootanimation of Latest Android Marshmallow version for Moto G 2014
Preview::cyclops:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Install it as a normal flashable zip from recovery
Steps to flash
1. Reboot to recovery
2. Select android_marshmallow_xxx_xx.zip file flash it
3. Reboot System
4. Enjoy Marshmallow Bootanimaion:fingers-crossed:
==> OR<==
1: Extract the zip and copy the file system/media/bootanimation.zip and paste in your SD card.
2: Name the file that you downloaded bootanimation.zip
3: Go to system
4: Go to media
5: Delete the bootanimation.zip that is there or copy it to SD card for backup
6: Now go to the download folder and Copy the bootanimation.zip that you downloaded
7: Paste it in media
8: change the premission that to 744
9: Reboot (Not Soft Reboot*)
10: Enjoy Marshmallow Bootanimaion:fingers-crossed:
Download Link: http://d-h.st/cL70
==>Or<==
Scan QR-Code
*Please do not make mirror link you can share this link:silly:
Note*
I AM NOT RESPONSIBLE IF YOUR PHONE GETS BRICKED OR BOOTLOOP OR OTHER PROBLEMS
Hit Like if Its Work
Works good here . Thanks !
Thank you!
Sent from my titan using XDA Free mobile app
Thanks for your Feedbacks Guys
Dont forget to hit like button and polls too
Enjoy on xda cheers..
Its just new and latest, but not as cool as Moto's stock boot animation...
very good work bro :good::fingers-crossed:
Thank You!
Very good man!
Sent from my Moto G 2014 using XDA Free mobile app
CM 12.1?
Does it work on cm 12.1?
axays said:
Flashable Bootanimation of Latest Android Marshmallow version for Moto G 2014
Preview::cyclops:
Install it as a normal flashable zip from recovery
Steps to flash
1. Reboot to recovery
2. Select android_marshmallow_xxx_xx.zip file flash it
3. Reboot System
4. Enjoy Marshmallow Bootanimaion:fingers-crossed:
==> OR<==
1: Extract the zip and copy the file system/media/bootanimation.zip and paste in your SD card.
2: Name the file that you downloaded bootanimation.zip
3: Go to system
4: Go to media
5: Delete the bootanimation.zip that is there or copy it to SD card for backup
6: Now go to the download folder and Copy the bootanimation.zip that you downloaded
7: Paste it in media
8: change the premission that to 744
9: Reboot (Not Soft Reboot*)
10: Enjoy Marshmallow Bootanimaion:fingers-crossed:
Download Link: http://d-h.st/cL70
==>Or<==
Scan QR-Code
*Please do not make mirror link you can share this link:silly:
Note*
I AM NOT RESPONSIBLE IF YOUR PHONE GETS BRICKED OR BOOTLOOP OR OTHER PROBLEMS
Hit Like if Its Work
Click to expand...
Click to collapse
Does this work on CM 12.1 NIGHTLY?
yes, it will work on cm 12.1
axays said:
Flashable Bootanimation of Latest Android Marshmallow version for Moto G 2014
Click to expand...
Click to collapse
Works on AOSP by LuK1337. Thank you.
going to check, replying to subscribe the thread so that I can vote afterwards
---------- Post added at 12:17 PM ---------- Previous post was at 11:53 AM ----------
working on cm11, there are png files as well if you wish to edit the logo like me
Is true?
Sent from my XT1063 using XDA Free mobile app
thanks!
Is there also a OEM Logo from google, like before you get your bootscreen... The official I mean with black background and white text
Is this thing running on CM 13?
yes
thesamu17 said:
Is this thing running on CM 13?
Click to expand...
Click to collapse
it will work
Can I flash this over a boot logo? Or will it change my bootlogo as well?
you can
Captain Krunch said:
Can I flash this over a boot logo? Or will it change my bootlogo as well?
Click to expand...
Click to collapse
its a boot animation not boot logo..
you can flash from recovery:good:

[Custom] Splash Logo / Boot Image

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download
Google Drive: https://drive.google.com/drive/folders/1h8Vxd4N8AisLmrlM59EL2vq_vCkTcODC
Note
Uncompress the downloaded zip and inside the folder, you'll see a file called: logo_mi9t_xxxx.img
Installation (CMD / Terminal)
Reboot to Bootloader / Fastboot
Connect your device to your computer
Open CMD / Terminal
Type: fastboot flash logo logo_mi9t_xxxx.img
Reboot
Installation (if your TWRP version let you)
Reboot to TWRP
Go to Install -> install image
Select logo_mi9t_xxxx.img
Check Logo partition and slide to confirm
Reboot
Screenshots
----------
----------
To make your own custom Logo
Inside the uncompressed folder, you'll see 4 images pic1.bmp, pic2.bmp, pic3.bmp, pic4.bmp; and 1 file mi9t_logo.py
Replace the images with yours
Open CMD / Terminal
type: python mi9t_logo.py
Flash the generated mi9t_logo.img
----------
----------
Credits
Nicolas72
Original Thread
https://forum.xda-developers.com/Mi-9/themes/mi-9-splash-boot-image-creation-script-t3952572
----------
----------
Very nice! Mi 9T is looking good, gonna try tomorrow.
EDIT: Works! Geat work, thanks!
Great share, thanks.
But how can we do it ourselves? I'm not quite sure, is there any picture or video narration?
To make your own custom Logo
- Inside the uncompressed folder, you'll see 4 images pic1.bmp, pic2.bmp, pic3.bmp, pic4.bmp; and 1 file mi9t_logo.py
- Replace the images with yours
- Open CMD / Terminal
- type: python mi9t_logo.py
- Flash the generated mi9t_logo.img
Click to expand...
Click to collapse
Portakalimsi said:
Great share, thanks.
But how can we do it ourselves? I'm not quite sure, is there any picture or video narration?
Click to expand...
Click to collapse
You replace the picture you want to change with yours and name it as the already to be replaced. then you run the script and the image is created which you can flash
Great, I make my own one
https://drive.google.com/file/d/1-j6KNbPHLwUTGrYouHUCGRNf3Orqby-Z/view?usp=drivesdk
I don't have Logo partition, I have only:
Boot
Dtbo
Recovery
System
Vendor
Persist
Only in Russian recovery there are logo partition
link is dead. up again pls
dekyeye said:
link is dead. up again pls
Click to expand...
Click to collapse
Made a generator available in the browser:
https://krzys.github.io/K20/index.html
If you don't select some image it'll use stock image.
Don't use images larger than 1080x2340.
Supported files: PNG, JPG, BMP, GIF (non-animated), HDR, PSD, TGA, PIC, PGM, PPM.
Edit: should even work on mobile phones... and runs faster than before
memox44 said:
Great, I make my own one
https://drive.google.com/file/d/1-j6KNbPHLwUTGrYouHUCGRNf3Orqby-Z/view?usp=drivesdk
Click to expand...
Click to collapse
Hi,
How to open the img and repack it ?
Thanks
z1022 said:
Hi,
How to open the img and repack it ?
Thanks
Click to expand...
Click to collapse
Just use generator I made, that's easier
memox44 said:
Only in Russian recovery there are logo partition
Click to expand...
Click to collapse
i would like to know if only with russian recovery we can make the splash logo or if we can use other recovery? thanks
Link works https://onedrive.live.com/?authkey=!AE9K6vBJqTu1gdE&id=D63AC77B5E191C90!1071&cid=D63AC77B5E191C90
kpkeerthi said:
Link works https://onedrive.live.com/?authkey=!AE9K6vBJqTu1gdE&id=D63AC77B5E191C90!1071&cid=D63AC77B5E191C90
Click to expand...
Click to collapse
Don't use my shared folder without permission or credit!
Can you add the option "powered by Android" please ?
Link not Working, i need stock no text warning
all links are dead, can you create a new link
Navy_Dragon05 said:
all links are dead, can you create a new link
Click to expand...
Click to collapse
I change the link because it was my shared folder and he was use it without my permission so search for my original post in Theme section
can you please provide link of your original post or the python script

Categories

Resources