How to Install Xposed for Android Lollipop 5.0 - Xperia Z2 Q&A, Help & Troubleshooting

How to Install Xposed for Android Lollipop 5.0
"Breaking support for Xposed was one of the few reasons which was pushing users to refuse Android 5.0 Lollipop update.
But now after the hard work from the developer “rovo89“, Xposed Framework has finally available for Android Lollipop.
Xposed for Lollipop update is still an alpha version so keep that in mind you might run in some bugs, unfortunately it is not working for all Android devices yet, ARMv7+ devices only except Samsung TouchWiz ROM.
The installation of Xposed Framework on Lollipop is different than KitKat because it requires flashing a zip file via custom recovery, In this post we will show you how to install Xposed for Android Lollipop 5.0 for your device.
Requirements :
• Rooted Android device running on Android 5.0 Lollipop with custom recovery installed.
• “XposedInstaller_3.0-alpha2.apk” APP to manage installed modules.
• Flashable “xposed-arm-20150430.zip” FILE to install the framework manually.
• In case of this process corrupt your files please take a backup of your data.
Instructions :
1. Download the required app and file to your device eg: download folder.
2. Install XposedInstaller_3.0-alpha1.apk app.
3. Reboot your device to recovery mode eg: TWRP recovery.
4. Tap “Install” option then browse the zip file to install it.
First time reboot will take long time than usual.
– Please keep in mind not all of modules gonna work on Lollipop otherwise you might run in bootloop or any other issues.
– However we post this guide for installing Xposed for Android Lollipop and its working fine for us without any problem but its recommended for newbies to wait until Xposed has been tested enough.
– If you can’t wait, you can use our guide at your own risk.
Enjoy Xposed on your Android device which running Android 5.0 Lollipop
– Warning: this is working only on Android 5.0 Lollipop, it does NOT work on Android 5.1."
step by step images could be reviewed at the original website
easy to install and working well on custom ROM eXistenZ Y created by niabok79.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Nothing, first time I lose my data, I have to reflash existenz!nothing, one time error of framework is clean but lucky packer don't active. After try Again i lose my recovery! What's your idea?

ebi sat said:
Nothing, first time I lose my data, I have to reflash existenz!nothing, one time error of framework is clean but lucky packer don't active. After try Again i lose my recovery! What's your idea?
Click to expand...
Click to collapse
rule #1: do backup before you think to make any changes with your phone.
rule #2: make sure that the rule #1 has been accomplished before start making any changes with your phone operating system.
rule #3: follow the instructions and remember that it's your decision to take the risk with any changes of your phone, otherwise you wouldn't have been in this forum.
rule#1001: in case of mistake return to the starting point and repeat the process from the scratch, and don't forget to dig out through the forum in most cases you'll find your solution.
when I made a dirty flash of Existenz Y, I got problems with the modules installed through Xposed (KK) in previous Existenz ROM, I would have rather to disactivate them all before doing dirty flash in case the old xposed installer and Xposed Xperia were installed. So I had to make fresh flash and install the Xposed as it was prescribed. Everything works for me.

This thread is not needed, we don't need users to explain how to install xposed! All the information is already available in the Xposed forums.
[OFFICIAL] Xposed for Lollipop - Android 5.0.x
[ALPHA] [UNOFFICIAL] Xposed for Android 5.1 - API v64 / Alpha 4 / 20150514 - Android 5.1.x
If you have device specific questions regarding Xposed then it is fine to use this Q&A section to ask them as other users will know the answer.
Thank you and thread closed,
matt4321

Related

[L3 II][APK] Unlock Bootloader & TWRP/Philz Installer

Hello there, here i share some mods i made to the recovery installer and i posted on a spanish forum but i think it will be better if i keep it here on XDA. Enjoy
What is Recovery and what it does?
Recovery is a way Android Phones boot up, usually used for wipe user data. More often, it's used for "Factory Data Reset" option on settings app. It's being modified by users for have more features.
What is Bootloader and what it does?
Bootloader is a "Boot Manager" which is usually locked by OEM to prevent some unsigned operating system could be installed. Unlocking it is essential for install a system modification (excepting root).
What things can i do with recovery?
You can wipe all your data, the app cache, make a backup of your actual OS, install a ROM/Mod and,in case something goes wrong, restore your system with the backup made previously.
It's easy to do all those stuff? What should i know before doing this?
First: you should have some things on your phone, but take it easy. The only thing you should consider is: "When you unlock the bootloader, you're voiding your warranty". So, it's your choice if you want to continue or not.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About:
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
LOKI?
Please Read FAQ in main thread before flashing
Features:
Includes ADB Sideload
You can customize the colors, and the background what you like
Take Screenshots
Touch UI
More features
Cons:
Not have an MTP Connection
Don't have the Aroma FM (easy to fix)
Latest version avaliable for this device: 6.59.0
Update: This recovery isn't compatible with CM12.1 .
About:
TWRP is an open source, community project. TWRP development is done by roughly 4 people at this point. We also have a large support community with many people who are willing to answer questions and help people with their devices either through our IRC channel or on forums like xda-developers.
Team Win was originally formed to work on porting WiMAX to CM7 for the HTC EVO 4G. After our work on the EVO 4G we wanted to work on a project that would work on more devices than just the EVO 4G and we settled on working on a recovery. Today TWRP is the leading custom recovery for Android phones.
A custom recovery is used for installing custom software on your device. This custom software can include smaller modifications like rooting your device or even replacing the firmware of the device with a completely custom “ROM” like OmniROM
You can find the source code for TWRP at github.com/omnirom/android_bootable_recovery/
Features:
Includes MTP on Recovery
Compressions on backups
Take Screenshots
Touch UI
More features
Cons:
Compression in backups may have some issues
Not so easy to customize (in comparation of philz)
Latest version avaliable for this device: 3.0.0
Update: This recovery is compatible with CM12.1 and CM13.
Thanks to this people to make this work possible:
@Phil3759 - Author of PhilZ Recovery // TeamWin - Authors of TWRP
@vuminhduc_1998 - @Caio99BR - @ensarman and me (a little bit)​
FAQ:
This is like the installer made by @vuminhduc_1998 ?
Is the installer made by Vu Minh Duc, only i just updated with the 2 new recoverys and make it compatible with CM and Stock ROM.
It will work on L3 II Dual? On E431? on E430?
Yeah, this recovery installer works on: E425 (being f,g,h or simply E425), E430, E431 and E435.
How can i Fix the Aroma FM on PhilZ?
You have to download the Aroma File Manager and place it on Internal SD, on the directory clockworkmod/aromafm. Note: The file name should be aromafm.zip.
Change links to AndroidFileHost, except this, good, very good.
cool!!! thanks @ElDainosor!!!
Good job for this @ElDainosor. Thanks. Just one suggestion, if you can add what version of Philz and TWRP it installs. I don't see it anywhere on first post or I am blind.
SecDet said:
Good job for this @ElDainosor. Thanks. Just one suggestion, if you can add what version of Philz and TWRP it installs. I don't see it anywhere on first post or I am blind.
Click to expand...
Click to collapse
Added and updated mirror for TWRP
Just install the apk TWRP to upgrade from old recoverys this one work like charm!! I tested the recovery TRWP in all the ROMs customs and originals, work really well. Thanks a lot

[XPOSED] Xposed Framework For Nitro A310/A311 KitKat, Lollipop, Marshmallow ROMs

XPOSED For NITRO A310/A311​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
XPOSED For KITKAT - 4.4.2 Stock & Custom ROMs
Requirements:
2.7 Experimental 1 APK
Links:
2.7 Experimental 1 APK
Installation:
1. Download the Xposed Installer APK and Install it
2. Launch the Xposed Installer, Go to the "Framework" section and Click on "Install/Update"
3. Reboot
4. Done. ..
That's It Now You Have Xposed On Your KitKat ROM .. If You Need To Uninstall ,You Can Do It Within The App Itself ,Click Uninstall & Reboot, Done!!..
XPOSED For LOLLIPOP - 5.1.1 (CM12.1 & Based ROMs)
Xposed Framework Specs for Lollipop - Nitro:
(Choose The Framework Zip Correctly With These Specs & Download)
-SDK - 22
-Architecture - ARM
Requirements:
Custom Recovery - TWRP
Framework Zip (xposed-v(xx)-sdk22-arm.zip)
Xposed Apk (XposedInstaller_3.0_alpha4.apk)
Links:
Recovery - TWRP 3.0.1-0
Xposed Apk for Lollipop
Xposed Framework Zip (This Link Contains Xposed Version from v72 to Latest So You Can Choose Old Ones Too)
Xposed v84 Zip (This This Latest Zip 03-05-2016)
Xposed Uninstaller Zip (If You Need To Remove Xposed Framework Means, Flash This Zip Via Recovery)
Important Thread Links : [DISCUSSION] Xposed For Lollipop
Installation:
1. Install The APK
2. Reboot to Recovery,
3. Locate Your Downloaded Framework Zip & Flash It,
4. Reboot Now.
That's it ,You Have Installed Xposed Successfully In LP ROM..
NOTE : If You Face Bootloops After Flashing The Zip Means, Wipe Dalvik Cache & Cache & Reboot Now
XPOSED For MARSHMALLOW - 6.0.1 (CM13 & Based ROMs)
Xposed Framework Specs for Marshmallow - Nitro:
(Choose The Framework Zip Correctly With These Specs & Download)
-SDK - 23
-Architecture - ARM
Requirements:
Custom Recovery - TWRP
Framework Zip (xposed-v(xx)-sdk23-arm.zip)
Xposed Apk (XposedInstaller_3.0_alpha4.apk)
Links:
Recovery - TWRP 3.0.1-0
Xposed Apk for Marshmallow
Xposed Framework Zip (This Link Contains Xposed Version from v72 to Latest So You Can Choose Old Ones Too)
Xposed v84 Zip (This This Latest Zip 03-05-2016)
Xposed Uninstaller Zip (If You Need To Remove Xposed Framework Means, Flash This Zip Via Recovery)
Important Thread Links : [DISCUSSION] Xposed For Marshmallow
Installation:
1. Install The APK
2. Reboot to Recovery,
3. Locate Your Downloaded Framework Zip & Flash It,
4. Reboot Now.
That's it ,You Have Installed Xposed Successfully In MM ROM..
NOTE : If You Face Bootloops After Flashing The Zip Means, Wipe Dalvik Cache & Cache & Reboot Now
This Thread Will Be Up-to-Date Always ,Thread Will Be Updated With New Xposed Links ASAP When Any Updates Are Released,This Thread Is Mainly For New Users Who Are Going To Install Xposed First Time & For Active Users, You Can Check Here For Speedy Updates For Xposed Framework & Apks In Our Forum Itself Cause Many Will Be Using Outdated Versions Only , All The Links Are OFFICIAL, There Are No Mirrors Here. And Special Thanks to Senior Developer rovo89 for his Awesome Work in Making XPOSED For ANDROID​
I tried to install xposed for my device. (Shv-210s) android kitkat. But I can't install xposed. This error massage showed
Sent from my SHV-E210S using Tapatalk

[Guide] [MM] [6.0.1] [Stock] Root + Magisk + Xposed - J7 2015

[MM] [6.0.1] [Stock] Root + Magisk + Xposed - SM-J700H (may work on other variants)* ​
The only reason that I've created this thread is simple, I couldn't find any proper guide to root my J7 device and the ones that are available aren't helpful at all as they are outdated methods and are obsolete.
I spent a lot of time on the internet finding these packages and in the end finally it worked like a charm!
So, here it goes!
Backup your DATA before proceeding
Optional: You should download the stock base flash file, just in case
Download the latest recovery for your device:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://twrp.me/samsung/samsunggalaxyj7exynos.html
https://twrp.me/samsung/samsunggalaxyj72015qcomsprint.html
https://twrp.me/samsung/samsunggalaxyj72016exynos.html
Download the following package and extract it:
ht t p s: //mega. nz/ #!pYZWWbBT!Nl5LaPxRGs_5bkMML9SwC2lLIpN9-FYxBdpVO5AEuUE
Remove spaces​
Click to expand...
Click to collapse
You'll find these files once you extracted the package
Install the apks as they are ordered (leave those 2 zip files as they will be flashed through the recovery)
Now enter into the download mode of your phone by pressing the following keys in combination VOL DOWN + HOME KEY + POWER KEY and connect it to the PC/Laptop. Hit up the ODIN and flash the downloaded recovery.
Follow this procedure as shown in the image, in order to flash the recovery. (Download the ODIN software from the google. I'm sorry I can't provide you the link) :silly:
Make sure you also have installed the Samsung USB Drivers as well! Otherwise ODIN won't detect your device.​
Click to expand...
Click to collapse
Now as soon as ODIN flashes the recovery it'll reboot your device in an instance, so keep that in mind, once it does you only need to hold VOL UP + HOME KEY + POWER KEY and if you done it properly and in synchronized time, you'll see the SAMSUNG LOGO and on the top of it a sentence marked in RED color will be shown and after that it'll boot up the recovery.
Now flash those 2 ZIP files which were left before in order through the recovery:
Reboot your phone once you have done flashing those 2 ZIP files (the first reboot may take some time)
If all done according to the steps, then congratulations you've rooted your phone along with installing XPOSED
Proof:
All credits goes to the DEVS who have created these wonderful tools
Enjoy and don't forget to hit the :good:​​
Very sexy thread!
Thanks love you homie.
People donate to this male, he really brought something crazy to the J7 community
android.zealot.fervor said:
Very sexy thread!
Thanks love you homie.
People donate to this male, he really brought something crazy to the J7 community
Click to expand...
Click to collapse
I just want magisk, not xposed, can it be possible?
Cause a payment app tez not running on rooted phone thats why, want to hide root via magisk.
sourav143 said:
I just want magisk, not xposed, can it be possible?
Cause a payment app tez not running on rooted phone thats why, want to hide root via magisk.
Click to expand...
Click to collapse
yes you can install magisk just skip the xposed installation procedure.
Is there a recovery for j7 perx?
Can I Update Xposed Installer app?
And does xposed is suitable for Samsung Galaxy J7 SM-J700F model?
I encounter the error "Failed to mount '/system' (Device or resource busy"
important question
I have a question
does the smj700 work fine in a phone that is sm j701m? or do I need the twrp for that model?
Latest rom?
SM-G610Y
Hello, does this work with J7 Prime SM-G610Y?

[ROM][UNOFFICIAL][12.1][CAS] LineageOS 19.1 [2022-8-14 Newly Updated!]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS for Xiaomi 10 Ultra [cas]
What is this?
A free and open-source operating system for various devices, based on the Android mobile platform.
Based on Android 12.1
Whats working?
Wi-Fi
Mobile data
GPS
FOD
Camera
Flashlight
Camcorder
Bluetooth
FM radio
NFC
Lights
Sound/vibration
etc..
NOT WORKING:
You tell me
No GAPPS INCLUDED
Download
Donate
Liked my work? Give me a beer
Stay tuned
Telegram Group
First Time Install / Clean Flash
1. Reboot to Recovery
2. Download the proper ZIP for your device
3. Wipe Data/Cache/System when coming from non-AOSP ROMs
4. Flash the Firmware
5. Flash the ROM
6. Reboot to System
**Firmware not included**
Update / Dirty Flash
1. Reboot to Recovery
2. Download the proper ZIP for your device
3. Flash the ROM
4. Reboot to System
​
Android OS version: android-12.1.0_r22​
Security patch level: 2022-8-5​
Firmware: V13.0.1.0.SJJCNXM​
Build author/Device Maintainer: Xayah​
Device Tree: https://github.com/XayahSuSuSu/device_xiaomi_cas​
Kernel Source: https://github.com/XayahSuSuSu/android_kernel_xiaomi_sm8250​
Device Vendor: https://gitlab.com/Xayah/vendor_xiaomi_cas​
Source code: https://github.com/LineageOS/android​
ROM Developer: Xayah​
Contributors
Xayah
Version Information
Status: UNOFFICIAL
Created 2021-7-30
Last Updated 2022-8-14​
This is amazing! Thank you. I have been waiting on this phone for months until there was a proper Lineage release.
delascabezas said:
This is amazing! Thank you. I have been waiting on this phone for months until there was a proper Lineage release.
Click to expand...
Click to collapse
Any feedback on the rom? I'm on the latest Evo but I think 5g is not working, is it working on this one? cheers
Hi. does this version have overheating charging problem like pixel? Thanks
vtec303 said:
Any feedback on the rom? I'm on the latest Evo but I think 5g is not working, is it working on this one? cheers
Click to expand...
Click to collapse
Have you experienced it yet?
hi, for 1st time install means i need to flash this "https://mifirm.net/downloadeu/8714" 1st then your rom after? my phone is currently running 13.0.4.0(SJJCNXM)
mercuris said:
hi, for 1st time install means i need to flash this "https://mifirm.net/downloadeu/8714" 1st then your rom after? my phone is currently running 13.0.4.0(SJJCNXM)
Click to expand...
Click to collapse
Firmware is not necessary for you to flash
On 18.1 I couldnt flash gapps because there wasnt enough space. Is this new updated version possible to flash gapps through twrp without getting the error code 70 not having enough partition space?
There is a high probability that after the always-on display is turned on, the fingerprint area will not light up when the finger is pressed on the fingerprint icon.
(有很高的概率,在开启 常亮显示 以后 ,手指按在指纹图标上,指纹区域并不会亮起来,反复提示请用力按住传感器,按下电源键解锁以后,再按才行)
Do banking apps and googlepay work?
If not this should be listed in the "not working" section
MoneyFist said:
Do banking apps and googlepay work?
If not this should be listed in the "not working" section
Click to expand...
Click to collapse
It works with a workaround.
Steps:
Flash magisk
Install modded SafetyNet fix
Reboot
Go to Settings > Apps, search for Google Play Store and Google Play Services, and "Clear Data" for both.
Reboot #2.
Go to Magisk, enable Zygisk, Enforce DenyList.
Add all needed apps in "Configure Deny List"
Reboot #3
Install Lsposed module
Install HideMyApplist
Reboot #4
Go to Lsposed, activate HideMyApplist
Select "system framework"
Open HideMyApplist app, go to "App Manage", and select all the apps you need. In each app, make sure to check all 3 toggles.
Enjoy!

[Fix] G8X Quad Dac on GSI Roms

Hi.
For people that are unaware some LG phones have almost and even no custom roms at all, that is the case with the G8x which is a shame for such a great phone,
fortunately something called Generic System Image (GSI) exists, it is a way for to get a custom rom with basic functionality for a wide range of devices.
I love the Quad Dac, it is one of the main features of a flagship LG phone, unfortunately it almost no developer owns an LG phone anymore so nobody is fixing it on GSI roms.
fortunately i found a kinda dirty way to fix it.
there are quite a few steps, so please be careful and pay attention:
1) On a stock (i used a11 iirc) rom Flash crDroid, other roms may or may not work
2) Flash TWRP and reboot to recovery
3) Flash your favorite GSI, i used crDroid 9.1
4) Flash Magisk, Flash Disable_Dm-Verity_ForceEncrypt if you dont want your data encrypted
5) on the magisk app flash LG-G8X-hifi-quad-dac-fix-GSI.zip
6) Reboot your device and a new "Quad Dac unavailable" icon should appear on the status bar edit
7) Plug in your headphones, touch it and enjoy!
Bonus* Hold the icon to enter the app and modify some stuff
Bonus 2* DP Should work, idk if Dual Screen works since i dont own one
Bonus 3* AOD also should work.
Just to clarify, i didnt develop neither the app, the files or the scripts, this was based on Fasheng's job,
the files were replaced from Lineage 19.1, i just put everything together so if something doesnt work
i may not be able to fix it.
Also, this may work on other LG devices (like G8, G8S, V50, V50s, etc) if you provide a rom for it.
you can use stock rom as a base but this may not work for you.
Changelog:
1.0.0 - Initial Release
1.0.1 - Removed incorrect steps on the description and readme
Enjoy your music!
Credits
@Fasheng (Scripting)
@lefttobleed (Lineage Rom)
@Cheese-ass (crDroid)
how you flash gsi roms, can you send me a noob guide? and files you use (recoverys any other zips?
Hello, thanks for the contribution, I got mine too work on my g8x. I was wondering if you could maybe share the APK as well. Mine only toggles on and off but won't launch the app.
THUNDERWAKE said:
Hello, thanks for the contribution, I got mine too work on my g8x. I was wondering if you could maybe share the APK as well. Mine only toggles on and off but won't launch the app.
Click to expand...
Click to collapse
there you have it, idk why it doesnt launch unfortunately, hopefully it works as a normal app
Alecsto said:
how you flash gsi roms, can you send me a noob guide? and files you use (recoverys any other zips?
Click to expand...
Click to collapse
i did it with TWRP, in order for the DAC to work you need to flash crDroid zip for this device as a normal and then you flash your preferred GSI.
There are plenty of guides on the internet for flashing a GSI, i can give you this one but any should work.
https://www.xda-developers.com/flash-generic-system-image-project-treble-device/
Thank you Senpai! (≧▽≦). You are a MAN among men.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
((Player)) said:
there you have it, idk why it doesnt launch unfortunately, hopefully it works as a normal app
Click to expand...
Click to collapse
thanks
For Any Fellow Audiophiles, I was also able to install Viper4droid Too. I just disabled & unistalled AudioFX, and installed the APK in the link.
System:
LG G8X - LMG850
CrDroid 7.4 - Android 11
See the link below, Credit to :RyanCr7
[APP] [FIX] 100% working Viper4Android for Android 10-11-12 devices
If you are someone like me who encountered countless problems while installing Viper4Android on your Android 10 or 11 device and have no idea what to do then you are in the right place. Just download and install the apk from the attachment below...
forum.xda-developers.com

Categories

Resources