Kernel in development...
Excuse my English, but my native language is another.
Last Note:
Code:
[COLOR="Red"]10/06/2015:[/COLOR] Coming soon APP LONAS CONTROL for this Kernel
Stable, fast and good batery.!!
This kernel for now is only functional on Android 5.0.2, tested exclusively in BOC4 And BOD6. It is not safe to work in other, so be sure to have one of these 2 bases before installing.
Disclaimer
Your warranty is now nulled.
I am not responsible for any damage or problems you may have!
YOU are choosing to make these modifications.
Do not forget this never.
Features highlights:
Based on Google and Samsung Open Source Code.
Compiled with Toolchain 4.8 (UBERTC 4.9.3).
Linux version 3.10.80.
Voltage Control
KCAL - Advanced color control
Dynamic Fsync Control
Sweep2Sleep
Ramdisk BOD6.
CPU OverClocking to 2.65 GHz (CPU deslimited (Exactly as Note4) is not OC).
Fast Charge.
Rem Sound.
PowerSuspend Driver.
ntelli-Plug.
Intelli-Thermal.
Advanced TCP control.
Selinux Permissive permanent.
Kali NetHunter Support.
Reduced wakelocks.
Governors: Barry-Allen (default), interactive, conservative, ondemand, userspace, powersave, performance.
I/O Scheldures: row (default), bfq, vr, fiops, zen, fifo, sio, cfq, deadline, noop.
Very Stable.
Good performance.
Good battery life.
------------------------------------------------------------------------------------------------------------
Do not forget to collaborate with a small donation through paypal, all this takes many hours of work over many hours testing, if you want this project follow alive.
Paypal for Donations: https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=XWECGLMQRQUCU
------------------------------------------------------------------------------------------------------------
Changelogs:
Code:
Version 0.5
Set SELinux to permissive permanently
Revert "Add CPUquiet"
Revert "ARM: dts: msm: set cpu_dma_latency to 701 usec"
Revert "ARM: dts: msm: schedule mmcqd on idle CPU to boost mmc perfor…
Revert "ARM: dts: add clk_div property in avtimer node"
Remove Tweaks for barry_allen
Set touch minimum at 960 Mhz else 883NHz
Update Files
Makefile: don't use GCC wrapper
decompressor: add LZ4 decompressor module
crypto: Add lz4 Cryptographic API
arm: add support for LZ4-compressed kernel
Update Config
default.prop: Make Art Optimize Everything
Google play services wakelock fix
Code:
Version 0.4
ARM: dts: add clk_div property in avtimer node
ARM: dts: msm: schedule mmcqd on idle CPU to boost mmc performance
ARM: dts: msm: set cpu_dma_latency to 701 usec
qcom-cpufreq: Allow all CPUs to get cpu_clk on targets with sync CPUs
qcom-cpufreq: Add support for separate governor tunables per policy
qcom-cpufreq: Fix frequency table registration
cpufreq: Prevent mpdecision changing scaling freq
Update tweaks
Fix unused is_sync
power: wakeup: allow userspace control for wakelocks
Rem Sound 1.4
Add CPUquiet
msm_adreno_tz: be aware of suspended state
introduce Adreno idler for devfreq-based Adreno devices
msm: kgsl: Bump the GPU frequency for long blocks of processing
adreno_idler: fix *freq allocations
msm_adreno_tz: use freq_table instead of min_freq
PM: devfreq: Fix show available freqs
powersuspend: add power_suspended boolean for global access
Barry_Allen Version 1.0
Update Config
Enable KSM
Code:
Version 0.3
ext4: don't save the error information if the block device is read-only
msm: kgsl: check for NULL pointer access
Build kernel - UBERTC 4.9.3 (UBER TOOLCHAINS)
Add Simple GPU Algorithm
Add Voltage Control (OC/Uv)
Add Dynamic Fsync Control v1.5
Add sysfs helpers for Voltaje Control
Add KCAL - Advanced color control
Add Sweep2Sleep
workqueue: Fix permission for power_efficient workqueue
sched: fair: reduce preemption latency (5ms)
Linux 3.10.80
Bluetooth: Fix kernel hci_dev_open timeout reset
Staging: android: binder: Ratelimit binder debug messages
binder: Quiet Binder
block: Switch from BFQ-v7r7 for 3.10 to BFQ-v7r8 for 3.10
PM: Introduce suspend state PM_SUSPEND_FREEZE
PM / suspend: Make cpuidle work in the 'freeze' state
power: Adds functionality to log the last suspend abort reason.
ACPI / PM: Hold ACPI scan lock over the 'freeze' sleep state
PM / suspend: Remove unnecessary !!
power: catch wake-up requests in suspend_again
PM / sleep: fix freeze_ops NULL pointer dereferences
suspend: Return error when pending wakeup source is found.
futex: Add another early deadlock detection check
msm: mdss: Replace msleep() with usleep()
msm: mdss: Add check for enabled regulators to avoid delays
USB: android: Fix memory leak in mass_storage_function_init()
smp: free related resources when failure occurs in hotplug_cfd()
smp: quit unconditionally enabling irqs in on_each_cpu_mask().
smp: don't warn about csd->flags having CSD_FLAG_LOCK cleared for wait
irq: pm: remove unused variable
Code:
[B]Version 0.2[/B]
Linux 3.10.79
Bcmdhd4358: Optimize WIFI
Decrease Timeout 10s for stopping processes
Add Tweaks and flags for GRAPHITE
suspend: Return error when pending wakeup source is found.
Low memory solution in lollipop
Set touch minimum at 729 MHz else 652 MHz
Support Codec Driver Rem Sound for WCD9330 Tomtom
Rem Sound 1.3
stereo call recording support
mmc: sdhci-msm: Add Samsung 64G search after tune quirk
add kali nethunter
fs/namei.c: fix potential memory leak in path_lookupat
dm-req-crypt: Free resources in destructor
qce50: Update clock vote for improved performance.
msm: kgsl: show current power level
ARM: move VFP init to an earlier boot stage
arm: vfpmodule: Fix warning procfs vfp_bounce reporting
Intelli_Thermal v 3.1.
Add CPU OverClocking to 2.65 GHz (CPU deslimited (Exactly as Note4) is not OC)
idr: fix a subtle bug in idr_get_next()
VFP: neon instead of VFP
fs/dcache.c: Fix the too small buffer for dname
crypto: arm/aes update NEON AES module to latest OpenSSL version
Add for Makefile L1/L2 cache size parameters
initramfs: several internal adjustments
Update tweaks and flags
Ported Fast charge for G901F
added several IO Schedulers, Updated, optimized, etc.
Add PowerSuspend
pinctrl: msm: fix potential NULL pointer dereference
Add IntelliPlug
IntelliPlug: Added to more performance
battery: Add sec charger controls pipeline
Add sysfs helpers
opp: De-obscurify OPP structs and disclose find_device_opp
wireless: dhd: Enable standby ARP and multicast packet filters
Update Tweaks
fix Optimize WIFI
input: keyboard: qpnp-keypad: register private data in SPMI dev
mhi: core: Fix double increment on event counter
mhi: core: Remove useless atomic variables
cpufreq: arm_big_little: set 'physical_cluster' for each CPU
cpufreq: Add stop CPU callback to cpufreq_driver interface
Default to NOATIME and NODIRATIME for FS performance improvement.
Update Makefile
ARM: dts: msm: disable support of 50MHz for i2c for apq8084
Update Barry Allen 0.9
Code:
[B]Versión 0.1[/B]
Initial base and sources Linux 3.10.40 by google and kernel.org
Update SM-G901F_EUR_LL_Opensource
Ramdisk BOD6
Enable pstore/ramoops dump for kernel panics.
ASoC: msm: qdsp6v2: Add FLAC in compress offload path
tools/include: use stdint types for user-space byteshift headers
cnss: Add API to get kernel boot time
cnss: Add APIs to initialize work queue
cnss: Add Set/Get DFS NOL APIs
cnss: using bmi target info from wlan to determine firmware files
Update sqlite3 for lollipop
Disabled CRCs
increased for init VM_MAX_READAHEAD to 256
Fix GPU_SYSFS
Add pn544
Make the smart cover thing work.
Substituted SSWAP (1GB) for the S6 (1.2GB). (luxury now hehe)
Update default.prop
video: mdss: Color temperature interface using PCC
Increase log buffer shift and add pr_alert when last_kmsg is not initialized
Add TCP Congestion Advance and westwood for default
Goodbye BUFFER DUMP reading and writing
mdss: stop spam
Fix barry_allen for init
Off restrictions root
devfreq: Re-enable simple_ondemand and fix simple_ondemand crashing
Source Code: https://github.com/javilonas/Lonas_KL-SM-G901F/
Downloads: https://sourceforge.net/projects/javilonas/files/Lonas_KL-SM-G901F/
Installation instructions
For Recovery:
You need recovery advanced (to have CWM o Philz Recovery).
Download the last kernel.
Reboot in recovery mode.
Make backup (recommended).
Flash the zip.
For Odin:
Download the last kernel.
Download the last program ODIN.
Reboot in mode download.
Flash the tar.
Thanks To/Credits:
Thanks to each of the dev who in one way or another have contributed to the kernel source code, are many and it is impossible to mention them all. visit my git for more info.
If I have to name someone and make special mention is my friend @placiano, for last hours thrown together several mornings and mutual cooperation we have had in our projects.
This kernel has many hours of development over many hours of testing, so please, take my job seriously and respects above all as you would like it to you be respected.
--------------------------------------------------------------------------
Project: Kernel for SM-G901F (Samsung Galaxy S5 Plus)
Name Project: Lonas_KLi-SM-G901F
Dev: Javilonas (Javier Sayago)
Github: https://github.com/javilonas
Twitter: https://twitter.com/Javilonas
Support Forum: http://www.esp-desarrolladores.com
Personal Forum: http://www.lonasdigital.com
Paypal for Donations: https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=XWECGLMQRQUCU
--------------------------------------------------------------------------
I usually move little by xda, But in the Spanish forum I am always active, in case they need help with something
Thread in ESP: http://www.esp-desarrolladores.com/showthread.php?t=4234
Thread in HTCMANIA: http://www.htcmania.com/showthread.php?p=18997555
This kernel will be published exclusive on esp-desarrolladores and xda-developers and htcmania, if you want to be published anywhere else please contact us by MP.
Reserved
Reserved 2
Great job from a great dev. These kernel flyes, stable and fast
FauxClock Settings :
CPU CLOCKS:
Max Freq: 2649600
Min Freq: 300000
CPU Governor: barry_allen
CPU HOTPLUG:
Hotplug Driver Selection: Inteliplug
Touch Boost: On
Hysterisis Value: 12
Intelliplug Profile: Balanced
Threshold Value: 1200
IO SCHEDULER:
I/O Scheduler (eMMC) / External SD: SIO
Readahead Size (eMMC) / External SD: 1536
MEMORY MANAGER:
Clear VFS Cache After Boot: On
Auto FS Writeback Delay Mode: On
Swappiness: 0
VFS Cache Pressure: 20
Dirty Ratio: 45
Dirty Background Ratio: 25
BATTERY CONTROLS:
Battery Temperature Throttling: On
Battery Temperature Threshold: 37 Celcius
Battery Throttle CPU Frequency: 1574400
MISCELLANEOUS:
Power Suspend Mode: Autosleep
Power Suspend: On
TCP Congestion Control: Westwood
@javilonas
can you reduce Min Freq to 268MHz ?
i really like the IntelliPlug but can you add alucard hotplug ( its best for battery life )
MEGAX91 said:
FauxClock Settings :
CPU CLOCKS:
Max Freq: 2649600
Min Freq: 300000
CPU Governor: barry_allen
CPU HOTPLUG:
Hotplug Driver Selection: Inteliplug
Touch Boost: On
Hysterisis Value: 12
Intelliplug Profile: Balanced
Threshold Value: 1200
IO SCHEDULER:
I/O Scheduler (eMMC) / External SD: SIO
Readahead Size (eMMC) / External SD: 1536
MEMORY MANAGER:
Clear VFS Cache After Boot: On
Auto FS Writeback Delay Mode: On
Swappiness: 0
VFS Cache Pressure: 20
Dirty Ratio: 45
Dirty Background Ratio: 25
BATTERY CONTROLS:
Battery Temperature Throttling: On
Battery Temperature Threshold: 37 Celcius
Battery Throttle CPU Frequency: 1574400
MISCELLANEOUS:
Power Suspend Mode: Autosleep
Power Suspend: On
TCP Congestion Control: Westwood
Click to expand...
Click to collapse
I recommend leave the settings set default, ROW is much better than SIO, internal and external sd defaulted to 2048,
0 swappiness not recommend it, lollipop has a serious problem with the memory and the sswap is essential, apart you lose performance, and there is no lag.
Then, of course, that changing the swappiness for VFS also have to modify Cache Pressure, Ratio Dirty, Dirty Background Ratio, etc...
However, everyone can put it as you like, but my recommendation is to leave the default settings that brings, which has led fine let me many hours of testing and changes. And for me the best performance / consumption is by default:in kernel
Now in 0.3 you can modify the voltage and enable dynamic fsync (among other changes more)
Future changes for the 0.3 branch in the test https://github.com/javilonas/Lonas_KL-SM-G901F/commits/test
A greeting
javilonas said:
Now in 0.3 you can modify the voltage and enable dynamic fsync (among other changes more)
Future changes for the 0.3 branch in the test https://github.com/javilonas/Lonas_KL-SM-G901F/commits/test
Click to expand...
Click to collapse
wow this is awesome.
THX.
MEGAX91 said:
@javilonas
can you reduce Min Freq to 268MHz ?
i really like the IntelliPlug but can you add alucard hotplug ( its best for battery life )
Click to expand...
Click to collapse
I do not Consider for now change the minimum speed. In different test That I Realized it was nothing stable, At least in my terminal.
It was hard to leave stable micro to 2.65 GHz. To give up performance to be stable kernel.
However, many new features are coming in future releases. Slowly. :good:
@javilonas
how can i use the Rem Sound ?
MEGAX91 said:
@javilonas
how can i use the Rem Sound ?
Click to expand...
Click to collapse
By default it is activated, I have to finish my APP (Lonas Control), From here, you can modify the different sound settings.
If you want to change them manually, you can access by root explorer to /sys/class/misc/rem_sound/ from there you can change headphone volume, speaker volume...
I'll continue giving cane to 0.3. Greetings
Add support KCAL - advance color control
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Enviado desde mi SM-G901F
Hello
Firstly thank you very much for your work
I follow your work since the kernel version 01.
I tried your kernel. And my device I work fine only one time. After the device boot until the tactile button light and after always the device block. I use the rom 1.3.1 simple gx deodexe. Maybe the deodexe is the root cause ?
Thanks in advance for your advice.
Sent from my SM-G901F using XDA Free mobile app
I,m using it on odexed stock rom,only with root and a little debloated and no problems.
nico21311 said:
Hello
Firstly thank you very much for your work
I follow your work since the kernel version 01.
I tried your kernel. And my device I work fine only one time. After the device boot until the tactile button light and after always the device block. I use the rom 1.3.1 simple gx deodexe. Maybe the deodexe is the root cause ?
Thanks in advance for your advice.
Sent from my SM-G901F using XDA Free mobile app
Click to expand...
Click to collapse
Using it with simplegx 1.3.2 since yesterday in the evening, no problems so far!
nico21311 said:
Hello
Firstly thank you very much for your work
I follow your work since the kernel version 01.
I tried your kernel. And my device I work fine only one time. After the device boot until the tactile button light and after always the device block. I use the rom 1.3.1 simple gx deodexe. Maybe the deodexe is the root cause ?
Thanks in advance for your advice.
Sent from my SM-G901F using XDA Free mobile app
Click to expand...
Click to collapse
It has nothing to do, Maybe some tweak you use, some external apk, a script in init.d ... may be several factors. We should see the log when the device will remain stuck.
Possibly is today released version 0.3
Great news Javi!!!
Hello
Thank-you for your answer.
I retried this morning and all work fine
I do not understand why
Bye
Sent from my SM-G901F using XDA Free mobile app
Related
...
DOWNLOADS
DOWNLOADS
This is a 4.3 kernel
Code:
a3e7ecd fixing compile error
fa9818c Revert "adding bcm 4334 from htc mini source"
9342182 update defconfig
3a346aa Update LUT KCAL init in mach-msm: display file Remove misc dmesg logspam
2bab8c6 ext4: fix memory leak in xattr
047dfb3 msm_kcal: delay late resume to be last to resume
73ee2be msm_kcal: add late resume drivers to autoload the lut
92a21be MSM KCAL: add reset lut capability
4b56eb9 MSM KCAL: add checksum and data integrity checks
dd04388 MSM KCAL: add lut edit capability
7b52d48 MSM KCAL: add sRGB LUT for better color space profiling
fcf387c checkin
ccd8059 Drivers: VIDEO update mdp.c to latest from faux
57e7788 VIDEO: remove duplicate method
5e89a20 msm_kcal_ctrl: initial code for generic MSM LCD temperature calibrations
7ce9c82 mach-msm/Kconfig: add LCDC LUT
3e9f2dc drivers/video/msm: restore update_lcdc_lut capabilities for MDP devices
e63b258 Implement kexec-hardboot
fb9d345 adding bcm 4334 from htc mini source
43e117a commenting out this for now until i can figure out how to use it
0f21f36 epic vibrate externalization fail
6fdc3cb final checkin
9047cbd patching to 3.4.18
548419f checkin
289188e fixing zram
82b9b1e Patching upstream 3.4.15->3.4.16
b53707e Patching upstream 3.4.14->3.4.15
607d4fd lightsensor: fix broken lightsensor table!
7e3afa3 gpu: fix dualports for Adreno320
1b8d13e Patching upstream 3.0.13->3.0.14
66af049 Patching upstream 3.4.12->3.4.13
2c21d57 Patching upstream 3.0.11->3.0.12
8abcac7 add frandom
bf4cdb7 ARM: net: JIT compiler for packet filters enabled by default
60c0276 Patch upstream to 3.4.11
fad47f5 lib: Sparc's strncpy_from_user is generic enough, move under lib/
1cd74e4 hrtimer: Consider preemption when migrating hrtimer cpu_bases
18b7ee9 dynamic fsync: favor true case since most will be using this feature
71b38fa dynamic filesync: add some cache optimizations
cacc180 fs/dyn_fsync: check dyn fsync control's active prior to performing fsync ops
e0bbd98 arch/arm/kernel/armksyms: fix merge derp
f16e48a switch the protection of percpu_counter list to spinlock
f495b57 decompress_unlzo: fix compilation error
391c73b ARM: 7593/1: nommu: do not enable DCACHE_WORD_ACCESS when !CONFIG_MMU
8741586 ARM: 7592/1: nommu: prevent generation of kernel unaligned memory accesses
db71255 ARM: 7492/1: add strstr declaration for decompressors
f84fe33 ARM: 7493/1: use generic unaligned.h
e4fada1 ARM: dcache: select DCACHE_WORD_ACCESS for little-endian ARMv6+ CPUs
42bd997 ARM: use generic strnlen_user and strncpy_from_user functions
a30fc65 lib: Fix generic strnlen_user for 32-bit big-endian machines
1d3b1de lib: add generic strnlen_user() function
11f20f6 drivers/media/video/msm/msm: fix compilation warning
bc5c1c2 word-at-a-time: make the interfaces truly generic
50eb19a lib/lzo: Optimize code for CPUs with inefficient unaligned access
ccaccac scheduler: Re-compute time-average nr_running on read
8e3e5d6 scheduler: compute time-average nr_running per run-queue
61902e7 fs/dyn_sync_cntrl: Linux 3.4 Kernel compatibility fixup
93d4d4e fs/dyn_sync_cntrl: dynamic sync control
b8dfcdf adding vibrate callouts
94bf3ce changing krait info for this SOC tabling
3c0b8da adding cmdline interfacing
78ca58f fixing cmdline
ec6881a fixing ROW
7f4306b block: cgroups, kconfig, build bits for BFQ-v6-3.4
95da3bd block: add kconfig and makefile triggers for files
1c58a8d block: introduce VR I/O scheduler
df03d62 block: introduce BFQ scheduler
6a3997a block: Introduce ROW Scheduler
fddf8f2 raising gpu clocks to something more usable
fbd12a0 opening GPU bottleneck
0f76274 Adding Makefile GCC optmization flags
42326e1 Sound Control: Sound control for WCD93xx codec
ad4fbf6 fixing UV control and adjusting some max clock voltages for 1.9ghz++
4da3f3d bulk governor update
8417256 cleaning up mass pick in of updates
7ff6e65 finishing cherry-pick
e706e3c power: Remove legacy wakelock code.
fd1a12e PM / Sleep: Add wakeup_source_activate and wakeup_source_deactivate tracepoints
9bbc810 PM / Sleep: Change wakeup source statistics to follow Android
7881d59 PM / Sleep: Use wait queue to signal "no wakeup events in progress"
bfd67c6 PM / Sleep: Look for wakeup events in later stages of device suspend
5aa1b32 redo fastcharge
ff19c15 Voltage Control: allow for lower minimums
5b60904 arm/crypto: Add optimized AES and SHA1 routines
e848882 Optimized ARM RWSEM algorithm
f3a54ad lib/string: use glibc version
dd1ef72 lib/memcopy: use glibc version
b5e357d acpu: show a useful warn message
8d01fb1 Voltage Control: initial voltage control for MSM S4-Pro SOC
93df85d Updating Cmdline options
d2b79ec fix hsic wakelock https://www.codeaurora.org/gitweb/quic/la/?p=kernel/msm.git;a=commit;h=41d004c4eaa5565cb8d9113862c3cef1e51be648 and https://www.codeaurora.org/gitweb/quic/la/?p=kernel/msm.git;a=commit;h=6f199aa800253a69e5679d1057823039f1bd65c9
9d88e67 Finally Zram is working -.-
640cc09 Move down direct IO plugging
8170954 Allow arm_memblock_steal() to remove memory from any RAM region
dd5ddc8 Add generic strnlen_user() function
4b88508 Make the interfaces truly generic
a2798f8 Sparc's strncpy_from_user is generic enough, move under lib
844a0d4 Move REPEAT_BYTE definition into linux/kernel.h
7c70d51 Increase portability of strncpy_from_user() implementation
85bf870 Optimize strncpy_from_user() zero byte search
8ba5785 Add full proper error handling to strncpy_from_user()
73d6683 Enable HAVE_EFFICIENT_UNALIGNED_ACCESS in all Krait cores.
0109fb6 Initialize cpufreq driver early at boot
42338fb ARM: proc: Add Krait proc info
f1800a0 Fixed HTC onmode charging
a036240 Working on fixing thermald and mpdec
d13e000 Adding mpdecision
e467e02 gcc fixups
289509f Updating sound files from DLXUB1 JB 4.2.2 Kernel release
d6abf07 kernel/wq: fix misuse of __cpuinit for hotplug functions
410d7e4 revert hacks for the previous misuse of __cpuinit for hotplug only functions
7cd912a kbuild: drop cpuinit/cpuexit checks in modpost
54b037e cpuinit: turn __cpuinit into nops
e57b572 cpuinit: get rid of __cpuinit, manual fixups
934b906 cpuinit: get rid of __cpuinit, sixth regexp
cea9fe1 cpuinit: get rid of __cpuinit, fifth regexp
b44dfab cpuinit: get rid of __cpuinit, fourth regexp
5115a0e cpuinit: get rid of __cpuinit, third regexp
27c143e cpuinit: get rid of __cpuinit, second regexp
890658f cpuinit: get rid of __cpuinit, first regexp
5f90248 drivers: cpufreq: address issue where cpus forget their clock speeds
6a14842 Finishing Beats hack
7d2754a sound: Hack beats to always being enabled
cc170bb fixing some m7 includes and dropping oc to 1.83ghz for now
e18f897 adding OC
1667b8e fixing leftovers
69546fb fixing s2w listen area
970f5da cleaning s2w pick
e3b0660 adding s2w and BLN
fd16342 updating audio files
68c0073 Revert "cm10.2 audio file"
83cf029 adding defconfig
0603667 cm10.2 audio file
52008d2 mass revert of changes that were unneeded
d2b2c5c ALSA: core: Fix crash by avoiding appl_ptr crossing 32-bit boundary
66a80c5 ASoC:msm: Increase Proxy buffering
b6b6c30 sound: HTC, don't enable debug printks by default!
7856155 reverting some sound changes
4ead816 Revert "Fixing earpiece amplification in call."
0ba2f84 updating qup i2c
f88ddff Fixing earpiece amplification in call.
3fb0d6d actually fixing sound :-p
00075fb fixing sound for DNA
6e313cf gcc 4.7 and update defconfig
73d59e0 fixing adb
40009ed fixing build files in rawchip
fe894d9 adding panel ids
23167ba adding bcm 4334 from htc mini source
11d9864 initial monarudo import
634e038 base htc source commit
THIS IS LEGACY CHANGE LOG
Code:
Legacy:
March 4th
- Changed MBPS Conversion ration for KGSL 2d/3d states
- Added Lionheart
- Added interactive
- forced vsync,
- enabled forced screenoff freq of 486mhz,
- adjusted s2w listen,
- fixed black screens on launching app from kgsl buffer overrun
- Enabled 1.9ghz clock on all Binned CPU's
March 2nd
-Rebased from stock HTC source (still old base)
-XZ Compression enabled
-Linaro Compiled 4.7.3 with -O3 Compression
-vfp compiled with neon
-Scheduler Autogroup patch by user android UID instead of task ID
-updated glibc version
-updated memcopy to use glibc version
-disabled perflock
-added interactive
-added ROW I/O scheduler
-added FIOPS I/O scheduler
-updated topology drivers
-added force fast charge
-switched fsycn to dynamic sync control
-Sweep2wake udpated
-ThermalD added
-Added optimized AES and SHA1 Routines
-Voltage control introduced
-Added Intellidemand
-Cpupower added
-Load freq altered t0 4*HZ+61
-Google Snappy Compression added
-Zram added and enabled by default
-Optimized ARM RWSEM algorithm
-Scheduler cpute time-average nr_running per run_queue
-shed fix rq->lock recursion
-ROW updates from CAF
-Sched improve scalability via "cpu buddies"
-Updated upstream to linux 3.4.33 (thanks dsb for doing all the hard work so i can cherry-pick it :D )
-Added SIO scheduler
-Added AC charging for unkown chargers
-Added Lionheart Governor
-Added support for FASTER PVS binned cpus
-Removed CPUINIT
-Added Mpdecision
-Added OC up to 1.83ghz for slow nom and fast binned cpus
-Added OC up to 1.90ghz for FASTER binned cpus
-Added debugfs entry for krait variant found at /sys/kernel/debug/krait_variant
-GPU OC up to 500mhz on 3d
-GPU OC up to 300mhz on 2d
-CPU Underclock avail to 192mhz
Feb 20th
-Completely Rebased
- Sweep2wake 100% with programmable start / end keys via kerneltuner
- Mpdecision implimented and working - showp's version from mako
- 192mhz-1.72ghz Clocks avail
- GPU Overclock up to 487mhz (will go up to 550mhz at a later release)
- ROW added
- Userspace Voltage Added
- Disabled Perflock
- Other misc fixups and patches
November 30th
- Linaro -O3 built
- newest GCC 4.7.3
- Added some OC (really this right now is just for testing it probably wont stick right)
December 1st
-Added sweep2wake with selectable start/end key - Thanks Showp/C.G
(Notes. Sweep2wake shoudl be enabled by defautl but if it doesnt work
you will need to turn it on You can do this manually by terminal...boring...
you can use Kernel Tuner to do it for you ..easy :D...
if you want to echo commands to sweep2wake to turn on/off:
/sys/android_touch/sweep2wake = valid values are 0/1 0 is off 1 is on
/sys/android_touch/sweep2wake_start = valid values are BACK HOME MENU (have to be caps)
/sys/android_touch/sweep2wake_end =valid values are MENU HOME BACK (have to be caps)
you would just d
su
echo XYZ > /sys/android/sweep2wake****
-Added 3d GPU OC up to 500mhz
-Added 2d GPU OC up to 200mhz
-Added CPU OC up to 1.99 ghz
-Added ThermalD /sys entry
-Added Statistics reading
-Added SIO and VR (vr reported broken)
-Added FSB overclock 600mhz
- December 2nd
-Fixed in call sweep2wake problem
-Updated linux version to 3.4.11
-altered clock steps
Code:
Incremental Beta Changelog
Changelog
B2.4 - Changed MBPS Conversion ration for KGSL 2d/3d states
B2.5 - Added Lionheart
B2.6 - Added interactive
B2.7 - forced vsync, enabled forced screenoff freq of 486mhz, adjusted s2w listen, fixed black screens on launching app from kgsl buffer overrun
B2.8 - Enabled 1.9ghz clock on all Binned CPU's
B2.9 - Disabled 1.9ghz for Nom and Slow binned CPU's rebased a dirty commit to clean up some graphics errors
B3.0 - Improved 2d KGSL performance moved some stuff into monarudo board files instead of 8960 common files, Accepted patch from Ker3l to fix some syntax errors in s2w code.
B3.1 - Fixed nominal 3d GPU clock choice (should fix stuttering in landscape mode)
B3.2EXP - LED backlight control for s2w.. doesnt work if your using kernel tuner right now sorry guys something in pedja's app code overrides the values written by s2w's backlight control
B3.3EXP - Added some more cmdline functions
B3.4EXP - refine led control for s2w
B3.5EXP - Optimize for sense 5 ROM (Forced GPU render for 3d @ 500mhz / 450mhz and 2d @ 300mhz
B3.6EXP - Disable some default cmdline parameters and lower preferred 3d clock
B3.7EXP - Raise preferred 3d clock and force gpu clock again for testing
B3.8EXP - Removed ALL cmdline options as users reported much problems
B3.9 - Rebase to 3.2 and only update the s2w LED control and update clock tables to CAF apq8064 tables
B4.0 - Removal of HTC_UTIL, enabled vidc core clock to 266mhz, removed lowest power level KGSL, Faux123 Soundcontrol added, slimbus fix channel concurrent usage during reconfiguration seq, slimbus decrement channel reference during reconfigure now
B4.1 - HUGE change log
deleted: dna/aroma/aroma/sample.png
finishing a few autobuild things
including changelog automatically into build scripting
Linux 3.4.36
Fix connected device switch to Inactive state.
Revert "ALSA: hda - hdmi: Make jacks phantom, if they're not detectable"
USB: Rip out recursive call on warm port reset.
USB: Prepare for refactoring by adding extra udev checks.
USB: Don't use EHCI port sempahore for USB 3.0 hubs.
dmi_scan: fix missing check for _DMI_ signature in smbios_present()
ftrace: Update the kconfig for DYNAMIC_FTRACE
Fix memory leak in cpufreq stats.
vfs: fix pipe counter breakage
Fix: compat_rw_copy_check_uvector() misuse in aio, readv, writev, and security keys
keys: fix race with concurrent install_user_keyrings()
crypto: user - fix info leaks in report API
xen/pat: Disable PAT using pat_enabled value.
HID: logitech-dj: do not directly call hid_output_raw_report() during probe
e1000e: fix pci-device enable-counter balance
ALSA: vmaster: Fix slave change notification
ALSA: ice1712: Initialize card->private_data properly
ARM: 7663/1: perf: fix ARMv7 EVTYPE_MASK to include NSH bit
drm/radeon: add primary dac adj quirk for R200 board
hwmon: (pmbus/ltc2978) Use detected chip ID to select supported functionality
hwmon: (pmbus/ltc2978) Fix peak attribute handling
hwmon: (sht15) Check return value of regulator_enable()
md: raid0: fix error return from create_stripe_zones.
md: fix two bugs when attempting to resize RAID0 array.
md: protect against crash upon fsync on ro array
ath9k_hw: improve reset reliability after errors
ath9k: fix RSSI dummy marker value
mwifiex: correct sleep delay counter
hw_random: make buffer usable in scatterlist.
ata_piix: reenable MS Virtual PC guests
SUNRPC: Don't start the retransmission timer when out of socket space
NFS: Don't allow NFS silly-renamed files to be deleted, no signal
cifs: ensure that cifs_get_root() only traverses directories
btrfs: Init io_lock after cloning btrfs device struct
target/pscsi: Fix page increment
SCSI: storvsc: Initialize the sglist
SCSI: dc395x: uninitialized variable in device_alloc()
xen/pci: We don't do multiple MSI's.
ARM: fix scheduling while atomic warning in alignment handling code
ARM: VFP: fix emulation of second VFP instruction
mach-msm/cpufreq: set safe frequencies from config
Removing some intellidemand management code as it is unneeded
intellidemand: Don't update the policy->cur upon cpufreq driver failure
intellidemand: remove unused min performance lock defines
intellidemand: remove eco mode option (replaced by intelli_plug)
intellidemand: remove cpu cores autoplug capability (replaced by intelli_plug)
intellidemand: add default values for dbs sync and optimal tuneables
intellidemand: give intellidemand's cpu_dbs_info its own name
intellidemand: Add support to consider other cpu load when scaling frequencies
cpufreq: Avoid using smp_processor_id() in preemptible context
Intellidemand: adjust the nr_run hysteresis for better UI response
intellidemand: tweak for not using min performance lock
intellidemand: add eco mode (dual core operations) bump version to 4.1
intellidemand: increase boost duration to 2.5 seconds from 1.5
intellidemand: code derps clean up!
Intellidemand: update for quadcore operations. bump version to 4.0
intellidemand: add minimum cpu performance lock
intellidemand: add a run queue persistence to determine browsing state
intellidemand: add bug fixes
intellidemand: Add boost pulse capability
cpufreq/cpufreq_intellidemand: intellidemand cpufreq governor (version 4.0)
msm: kgsl: Make the GPU device aware of the next pending event
iommu/msm: fix the include guard in iommu.h
cpufreq: Fix panic when setting sampling rate
Fixing initrd.img and a few final things from cherry-pick
Merge branch 'exp'
msm: kgsl: Remove extra interrupts when setting MMU state
msm: kgsl: Always reset global ts_cmp_enable on GPU interrupts
msm: cpufreq: fix a race between hotplug and cpufreq
msm: kgsl: Fix the address translation ranges for GPU IOMMU
msm: kgsl: Simplify logic for VBIF registers across A3XX cores
msm: kgsl: Ensure correct enable sequence for 2D core clock
B4.2
i fail at sweep2wake
drivers input touchscreen: synaptics_3200 fixing sweep2wake button locationns
updating thermal sensor used for thermald
updating some sweep2wake defs to try and get custom buttons working
msm_fb: display: free iommu buffers for WFD
msm: iommu: Synchronize access to IOMMU cfg port
msm: Kconfig: Enable IOMMU CPU-GPU synchronization
fixing cherry-pick error
usb: ehci-msm-hsic: Add asynchronous reset to HSIC
msm: usb: Initialize variable hcd to fix warning
usb: host: ehci: allow ehci_bus_resume symbol to be unused
USB: HSIC: Add support for HSIC core and SMSC HUB using DT
usbnet: ratelimit kevent may have been dropped warnings
usbnet: decrease suspend count if returning -EBUSY for runtime suspend
net: usb: Handle interface suspend properly
net: usb: Abort suspend if get_encap response is not sent
net: usb: Prevent suspend if response available notification received
usb: misc: Avoid excessive logging during disconnect
usb: hsic: suspend hsic until really activated by the gadget driver
block: add REQ_URGENT to request flags
block: row: Update initial values of ROW data structures
block: row: Don't notify URGENT if there are un-completed urgent req
block: row: Idling mechanism re-factoring
block: row: Dispatch requests according to their io-priority
EHCI: HSIC: Add enhancements to debug logging
Remove some HSIC changes made by HTC
EHCI: HSIC: Allow standalone power collapse when HSIC is active
usb: ehci-msm-hsic: Add asynchronous reset to HSIC
usb: ehci-msm-hsic: Change HSIC reset sequence
usb: ehci-msm-hsic: Add support in device tree to MSM HSIC host
EHCI: HSIC: Add support to vote for SVS digital voltage
usb: ehci-msm-hsic: Remove usage of MSM_GPIO_TO_INT
usb: Decrease autosuspend delay to 200ms upon usb disconnect
usb: Add support to set autosuspend delay by controller driver
usb: ehci-msm-hsic: Fix compilation error
EHCI: HSIC: Fail root hub bus suspend when port is not enabled.
msm: hsic: Disallow processor idle sleep while driving resume signal
USB: Prevent system suspend when HSIC device is active
USB: Allow skipping device resume during system resume
msm: hsic: Retry port RESUME if unable to send SOFs within 3ms
EHCI: HSIC: Use counter for timeout in ulpi_read()
Revert "usb: ehci-msm-hsic: replace wakelock with wakeup source"
usb: ehci-msm-hsic: abort suspend when interrupts are pending
usb: ehci-msm-hsic: replace wakelock with wakeup source
msm: reduce verbose messages from runtime suspend/resume
updating the default aroma license from apache to GPL GNU
updating build number to 4.2
Updating msm_thermal upstream
mach-msm: acpuclock-8960.c fixing steps hfpll values were wrong
fixing typo in hfpll values as the clocks were not matched with what was showing
B4.3
REVERTED:
usbnet: ratelimit kevent may have been dropped warnings
usbnet: decrease suspend count if returning -EBUSY for runtime suspend
net: usb: Handle interface suspend properly
net: usb: Abort suspend if get_encap response is not sent
net: usb: Prevent suspend if response available notification received
B4.4 REVERTED:
EHCI: HSIC: Add enhancements to debug logging
Remove some HSIC changes made by HTC
EHCI: HSIC: Allow standalone power collapse when HSIC is active
usb: ehci-msm-hsic: Add asynchronous reset to HSIC
usb: ehci-msm-hsic: Change HSIC reset sequence
usb: ehci-msm-hsic: Add support in device tree to MSM HSIC host
EHCI: HSIC: Add support to vote for SVS digital voltage
usb: ehci-msm-hsic: Remove usage of MSM_GPIO_TO_INT
usb: Decrease autosuspend delay to 200ms upon usb disconnect
usb: Add support to set autosuspend delay by controller driver
usb: ehci-msm-hsic: Fix compilation error
EHCI: HSIC: Fail root hub bus suspend when port is not enabled.
msm: hsic: Disallow processor idle sleep while driving resume signal
USB: Prevent system suspend when HSIC device is active
USB: Allow skipping device resume during system resume
msm: hsic: Retry port RESUME if unable to send SOFs within 3ms
EHCI: HSIC: Use counter for timeout in ulpi_read()
Revert "usb: ehci-msm-hsic: replace wakelock with wakeup source"
usb: ehci-msm-hsic: abort suspend when interrupts are pending
usb: ehci-msm-hsic: replace wakelock with wakeup source
msm: reduce verbose messages from runtime suspend/resume
updating the default aroma license from apache to GPL GNU
updating build number to 4.2
Updating msm_thermal upstream
mach-msm: acpuclock-8960.c fixing steps hfpll values were wrong
fixing typo in hfpll values as the clocks were not matched with what was showing
B4.5:
REVERTED:
msm_fb: display: free iommu buffers for WFD
msm: iommu: Synchronize access to IOMMU cfg port
msm: Kconfig: Enable IOMMU CPU-GPU synchronization
fixing cherry-pick error
usb: ehci-msm-hsic: Add asynchronous reset to HSIC
msm: usb: Initialize variable hcd to fix warning
usb: host: ehci: allow ehci_bus_resume symbol to be unused
USB: HSIC: Add support for HSIC core and SMSC HUB using DT
B4.6:
-Patched upstream to 3.4.37
-Force enabled beats audio filtering for any headset plugged into device - Show-p1984
-Removed 1.9ghz clock step as it was causing failure to boot for 80% of testers
-Updated ROW
-Updated Badass governor to have 3 phase governing and GPU aware throttling
B4.7
-Forced booting clock @ 1.67ghz so those with failure to boot issues would be ok
-fixed s2w response time and button location values
B4.8
-Set boot clocks to 1.5ghz max 384min (stock values) for people to avoid issues booting
-Upped build number
-fixed "nominal" gpu speed back up to 450mhz
-added 550mhz 3d step (you guys most likely wont ever step into it but its here for kicks anyway and for testing when i grab logs ill see the kgsl clock change up to 550mhz)
B4.9
-Introduced full customization via aroma (thanks showp)
B5.0
-finished the aroma installer ensured all selections were working.
B5.1
-Reverted to Showp's original sweep2wake method for now
-Fixed some misc code
-Fixed clock on boots ramping up
-Other misc stuff........ its on github and in the installer changelog
B5.2
-Rebase no booting build
B5.3
-Fixed booting issue after rebuilding project from scratch
B5.4
-Imported HSIC changes from Crpalmer
-Imported KGSL changes from Crpalmer
B5.5
-Reverted KGSL changes from Crpalmer
-patched in HTC 2.04 changes
-Imported lots of HSIC changes from CAF
B5.6
- Attempting to get Beats hack moved to right Amp driver
- adding Defconfig for easy building
- Increasing version number
- PM / Sleep: Add wakeup_source_activate and wakeup_source_deactivate tracepoints
- PM / Sleep: Change wakeup source statistics to follow Android
- PM / Sleep: Look for wakeup events in later stages of device suspend
- power: remove pocket mode power check
- vibrator: tone down HTC's message spew
- Disable DIAG_XPST
- usb: tone down new HTC message spew
- Remove enable_boost support
- synaptics_3200: HTC added yet more debugging debugging spew
- PM / devfreq: exynos4_bus: honor RCU lock usage
- PM / devfreq: add locking documentation for recommended_opp
- PM / devfreq: remove compiler error with module governors (2)
- PM / devfreq: Fix return value in devfreq_remove_governor()
- PM / devfreq: Fix incorrect argument in error message
- PM / devfreq: missing rcu_read_lock() added for find_device_opp()
- PM / devfreq: exynos4_bus.c: Fixed an alignment of the func call args.
- PM / devfreq: Add sysfs node to expose available governors
- PM / devfreq: allow sysfs governor node to switch governor
- PM / devfreq: governors: add GPL module license and allow module build
- PM / devfreq: map devfreq drivers to governor using name
- PM / devfreq: Use devm_* functions in exynos4_bus.c
- PM / OPP: using kfree_rcu() to simplify the code
- PM / OPP: predictable fail results for opp_find* functions, v2
- PM / OPP: Export symbols for module usage.
- PM / OPP: RCU reclaim
- PM / OPP: Initialize OPP table from device tree
- PM / devfreq: register governors with devfreq framework
- PM / devfreq: provide hooks for governors to be registered
- PM / devfreq: export update_devfreq
- PM / devfreq: Add sysfs node for representing frequency transition information.
- PM / devfreq: documentation cleanups for devfreq header
- PM / devfreq: Add sysfs node to expose available frequencies
- PM / devfreq: make devfreq_class static
- PM / devfreq: fix sscanf handling for writable sysfs entries
- PM / devfreq: kernel-doc typo corrections
- PM / devfreq: Add current freq callback in device profile
- PM / devfreq: Add suspend and resume apis
- PM / devfreq: Core updates to support devices which can idle
- PM: devfreq: init performance/powersave governor
- Remove extra frequency setting
- staging: android: Add some Kconfig help entries
- staging: android: Avoid using camelcase in binder.h
- staging: android: Fix two checkpatch issues in binder.c
- bluetooth: bulk update to the CAF drivers
- Remove excess debugging
-- power: Remove legacy wakelock code.
- PM / Sleep: Use wait queue to signal "no wakeup events in progress"
- rwsem: do not block readers at head of queue if other readers are active
- rwsem: implement support for write lock stealing on the fastpath
- rwsem: simplify __rwsem_do_wake
- rwsem: skip initial trylock in rwsem_down_write_failed
- rwsem: avoid taking wait_lock in rwsem_down_write_failed
- rwsem: use cmpxchg for trying to steal write lock
- rwsem: more agressive lock stealing in rwsem_down_write_failed-
- rwsem: simplify rwsem_down_write_failed
- rwsem: simplify rwsem_down_read_failed
- rwsem: move rwsem_down_failed_common code into rwsem_down_{read,write}_failed
- rwsem: shorter spinlocked section in rwsem_down_failed_common()
- rwsem: make the waiter type an enumeration rather than a bitmask
- rwsem: Implement writer lock-stealing for better scalability
- rwsem-spinlock: Implement writer lock-stealing for better scalability
- PM: Introduce suspend state PM_SUSPEND_FREEZE
- cpufreq: Convert the cpufreq_driver_lock to use RCU
- cpufreq: Convert the cpufreq_driver_lock to a rwlock
Come hangout in IRC
freenode #teamblackout
BEASTMODE Revisited is ONLY FOR 4.3 ROMS!!!!!!!!!!!!!!!!!!
This is old news
BEASTMODE 5.0+ will not install correctly and run correctly for you s-on users please follow these directions to get your customized boot.img off your sdcard
flash zip as you would normally but dont reboot out of recovery
copy the /tmp/newboot.img somewhere you can get to it
then use flashimageGUI or fastboot to flash the newboot.img you pulled from your phone
profit
BEASTMODE 5.1++
OH NOEZ MY SWEEP2WAKE ONLY WORKS 1 WAY:
KERNEL TUNER AND TRICKSTER MOD
now cause this behaviour
i dont get it
but the installer does all the work for you
i now use setcpu you can find that here
http://forum.xda-developers.com/showthread.php?t=505419
it allows control of everything you the user needs to fiddle with
I would not suggest any intense kernel management application
Setcpu is a great one
everything important is handled by your choices in the installer for the kernel
any other management apps may screw with those previously made choices
Common problems and errors
Uhmmm i get weird flickering screen after bootanimation my rom is based of 2.04 firmware
FIX Downgrade your rom to a 1.14 based rom HTC has not released source for their new base and the EGL HAL doesnt play well with this kernel this applies to ALL viper 1.2 users
Beastmode 5.4+ will work on 2.04 based roms with no modifications needed to the rom
Thanks hTC for releasing 2.04 source
I get black screen after boot animation or SOD after first boot what gives?!
FIX For older releases of this kernel you needed to remove the /system/bin/mpdecision and /system/bin/thermald Since release 3.3 this issue has been resolved it does not matter wether you have mpdecision or thermald in your /system/bin/
FIX Make sure you don't have any apps applying settings on boot for voltages clocks etc, or taking any kind of screen off profile for clocks as i have a foolproof screenoff setting built INTO the kernel
Zarboz said:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The Beastmode-DNA kernel Project (formerly EvilZ)
This is a Kernel for the hTC DNA the source is from HTC with mods by myself. You can find my modified source code at https://bitbucket.org/teamblackout/droid-dna-beastmode
and at my teams github here
https://bitbucket.org/teamblackout/evilz.213.blackout_edition/
What is a kernel you might ask?
If you dont see something on future plans that you would like. Please shoot me a message
Future Plans:
Multicore Mpdecision
GPU OC Controlled by installer
CPU OC controlled By installer
Sweep2wake
Insanely awesome Beastmodeness
Topology
ThermalD Kernel
You guys tell me?
would like to extend thanks to:
Sbryan12144, Ca1ne, Mdeejay, Faux123, DooMLorD , TwistedUmbrella, Imoseyon. ThickLizard, ToastCFH, Rydah805, The people who donated and continue to donate, and all the great people on XDA
all upstream patches came from kernel.org and were applied using the standard patch command and then cleaning up .rej files as they come
some upstream patches were cherry-picked from github and are noted as such
Click to expand...
Click to collapse
2way call recording patch please
k2trill said:
2way call recording patch please
Click to expand...
Click to collapse
will look into it but it has been a pain on the other 8960 chipsets
Zarboz said:
will look into it but it has been a pain on the other 8960 chipsets
Click to expand...
Click to collapse
Do you think this will solve the sd card permissions and camcorder issues on MyComputerDoctor's rom?
xhunter187 said:
Do you think this will solve the sd card permissions and camcorder issues on MyComputerDoctor's rom?
Click to expand...
Click to collapse
no idea one of my teammates owns the device just tryin to spread the love this is untested
hence the A001 (alpha release 001 tag)
once i get some testing in things will progress
you can checkout my other work
Thanks for this bro very cool ...
From my DROID DNA
Zarboz said:
no idea one of my teammates owns the device just tryin to spread the love this is untested
hence the A001 (alpha release 001 tag)
once i get some testing in things will progress
you can checkout my other work
Click to expand...
Click to collapse
I would be willing to test stuff out for you if you would like? Really loving this phone so you can say that I am really anxious to try out new things out. Convinced the wife to take my Rezound since it is such an upgrade from her Statosphere lol. She loves it especially since it is S-Off.
Well, I flashed it, but it doesn't boot, just loops at the splash screen.
Argumentation said:
Well, I flashed it, but it doesn't boot, just loops at the splash screen.
Click to expand...
Click to collapse
You placed the modules ? I flashed it with no problems :beer:
From my DROID DNA
Rammstein1313 said:
You placed the modules ? I flashed it with no problems :beer:
From my DROID DNA
Click to expand...
Click to collapse
Yes, I copied them from internal to \system in TWRP and ran chmod 777 on the folder.
Argumentation said:
Yes, I copied them from internal to \system in TWRP and ran chmod 777 on the folder.
Click to expand...
Click to collapse
You pushed the files ? Or flashed with twrp
From my DROID DNA
Rammstein1313 said:
You pushed the files ? Or flashed with twrp
From my DROID DNA
Click to expand...
Click to collapse
I used the file manager in TWRP to move them to \system\lib from internal storage since I thought you can't push things to \system while booted in Android. Will this not work?
It doesn't boot. I think the source is bad. I already MSGd HTC about it.
D
.
Sent from my HTC6435LVW using Tapatalk 2
Argumentation said:
I used the file manager in TWRP to move them to \system\lib from internal storage since I thought you can't push things to \system while booted in Android. Will this not work?
Click to expand...
Click to collapse
Pm
From my DROID DNA
dsb9938 said:
It doesn't boot. I think the source is bad. I already MSGd HTC about it.
D
.
Sent from my HTC6435LVW using Tapatalk 2
Click to expand...
Click to collapse
Thank god I'm not crazy.
Argumentation said:
Thank god I'm not crazy.
Click to expand...
Click to collapse
I was glad to see somebody else had tried too. I thought I had borked my build.
D
.
Sent from somewhere irrelevant.
Argumentation said:
Thank god I'm not crazy.
Click to expand...
Click to collapse
Lol, thank goodness I made a back up , no bootloop here but , definitely didn't work either
From my DROID DNA
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome to my Kernel Thread !
This Kernel is a rework of Hells-Core !
Latest Build: Beta 3 (B3)
my github
Donations I got
*MallardDuck
-
Big thanks to @sid21 and @One2thTEXAN for gfx and
XDA:DevDB Information
UltimateHellsCore_Development, a Kernel for the Google Nexus 4
Contributors
AndrolinRoot, hellsgod
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: Beta 2
Beta Release Date: 2013-09-06
Created 2013-09-06
Last Updated 2013-09-07
Features of this Kernel
Code:
:::4.3 starts from::::
<<Main Features from 4.2 which are mostly also in 4.3>>
ROW Scheduler (default)
SIO
Color profiles
ARM Auto Hotplug
Scheduler-optimizing
-100MV undervolt
UV Interface
288mhz as "low freq"
some not used freq. are removed
faux Sound Control
faux Speaker Amp Control
faux Gamma Control with motley's tweak to get it working with trickstermod
dynamic fsync
USB Force Fast Charging
mako_hotplug 2 (thx myfluxi, franciscofranco)
Scheduling Patches
rq Patches
lmk Patches
pm Patches
S2W Fix (thx myfluxi)
GPU Patches
Charger / Battery Patches
HSIC Patches
O2 optim.
O3 optim.
workqueue Patches
<<I dont remember all>>
(b30)
Rebase to 4.3 source
Alle main features from 4.2
(b31)
Makefile: Compile Optimization Part 2
Use pgprot_writecombine in ion_system_heap_map_kernel for optimization (IntersectRaven)
(b32)
Async I/O latency to a ssd greatly increased, 34% gain (Creds: kleikamp)
mm: writeback: every 500ms the writeback daemon kicks in and flushes the dirty pages into disk (franco)
Revert "block: row: fix one of the magic values.
Revert "block: row: hardcode magic values
block: row-iosched idling triggered by readahead pages (Lee Susman)
mm: change initial readahead window size calculation (Lee Susman)
mm: pass readahead info down to the i/o scheduler (Lee Susman)
thermal: tsens8960: Increase the polling rate (Siddartha Mohanadoss)
cgroups: timer_slack: forward port timer_slack to 3.4 (franco)
msm_fb: Set RR sched policy for Glupdator thread (Kalyan Thota)
msm: don't compile MSM_RUN_QUEUE_STATS (franco)
ARM: 7493/1: use generic unaligned.h (faux123)
lib: Sparc's strncpy_from_user is generic enough, move under lib/ (faux123)
lib: add generic strnlen_user() function (torvalds)
lib: Fix generic strnlen_user for 32-bit big-endian machines (paulusmack)
ARM: use generic strnlen_user and strncpy_from_user functions (faux123)
kernel: Move REPEAT_BYTE definition into linux/kernel.h (faux123)
word-at-a-time: make the interfaces truly generic (torvalds)
arch/arm/Kconfig: enable unaligned capability for ARM (faux123)
ARM: dcache: select DCACHE_WORD_ACCESS for little-endian ARMv6+ CPUs (Will Deacon)
ARM: 7492/1: add strstr declaration for decompressors (Rob Herring)
ARM: 7592/1: nommu: prevent generation of kernel unaligned memory accses (Will Deacon)
ARM: 7593/1: nommu: do not enable DCACHE_WORD_ACCESS when !CONFIG_MMU (faux123)
(b33)
lib/scatterlist: do not re-write gfp_flags in __sg_alloc_table()
switch the protection of percpu_counter list to spinlock
lib/vsprintf.c: "%#o",0 becomes '0' instead of '00'
vsprintf: correctly handle width when '#' flag used in %#p format
vsprintf: further optimize decimal conversion
vsprintf: add %pMR for Bluetooth MAC address
lib/vsprintf.c: remind people to update Documentation/printk-formats
lib/vsprintf.c: kptr_restrict: fix pK-error in SysRq show-all-timers(Q)
vsprintf: add support of '%*ph[CDN]'
lib: vsprintf: optimize division by 10 for small integers
lib: vsprintf: optimize division by 10000
lib: vsprintf: optimize put_dec_trunc8()
lib: vsprintf: fix broken comments
lib/vsprintf: update documentation to cover all of %p[Mm][FR]
lib/vsprintf.c: improve standard conformance of sscanf()
scatterlist: add sg_alloc_table_from_pages function
scatterlist: atomic sg_mapping_iter() no longer needs disabled IRQs
tmpfs: fix mempolicy object leaks
Make sure PWMs are running in sync
lm3530: Add a toggle for the CABC PWM
msm: pm-8x60: Setup memory for save/restore cpu registers early
msm: hotplug: wait for hotplug completion event from secondary core
msm: pm-8x60: Use relative time for events
msm: pm: send notification only for SPC and PC
msm_fb: display: fix iommu page fault when iommu buffer freed
msm: avs: Restore core voltage when disabling AVS
msm: spm: set vdd directly for current cpu
msm: pm: Add support for retention on each core
msm: pm: add failed stats
msm: rpm: add debug msg for rpm outstanding req
Staging: android: binder: Fix memory leak on thread/process exit
msm: display: Add DSI clock control for MDP GDHS power collapse
mako: Add DSI clock control for MDP GDHS power collapse
msm: Fix race condition in domain lookup
mmc: core: Allow changing bus frequency for SD/eMMC cards in runtime
mmc: core: Fix some driver hangs when dealing with broken devices
mmc: core: Add load based clock scaling support
mmc: core: Add sysfs entries for dynamic control of clock scaling
mmc: core: claim mmc host while enabling clock scaling from userspace
mmc: core: run clock scaling only in valid card state
mmc: core: Log MMC clock frequency transitions
mmc: core: Add support for notifying host driver while scaling clocks
mmc: msm_sdcc: Add support for dynamic bus clock vote
mmc: msm_sdcc: fix a type mismatch in msmsdccc_config_dma()
mmc: msm_sdcc: Enable clock scaling capability
mmc: core: remove the polling for BKOPS completion
msm: msm_bus: Fix the 64-bit division during interleaving
msm: msm_bus: Change MDP port interleaved setting
msm: msm_bus: Add NULL pointer checks
msm: msm_bus: Explicitly clear client requests before removal
msm: msm_bus: Correct the return value from register-client
msm: pm-data: Enable powercollapse/suspend_enabled for non-boot cpus
sched: Reset rq->next_interval before going idle
hrtimer: Prevent hrtimer_enqueue_reprogram race
sched: fix reference to wrong cfs_rq
sched: Convert BUG_ON()s in try_to_wake_up_local() to WARN_ON_ONCE()s
sched: change WARN_ON_ONCE to WARN_ON in try_to_wake_up_local()
msm: move printk out of spin lock low_water_lock
msm: pm: Add support to query cpu status
mako: Add support to query cpu status
mmc: Urgent request support
msm_fb: hdmi: Resolution modes on HDMI
remove compilation error by changing int to uint32_t
video: msm: external: Limit HDMI to standard resolutions
# VM-Tweaks
echo "4096" > /proc/sys/vm/min_free_kbytes;
echo "0" > /proc/sys/vm/oom_kill_allocating_task;
echo "0" > /proc/sys/vm/panic_on_oom;
echo "0" > /proc/sys/vm/laptop_mode;
echo "0" > /proc/sys/vm/swappiness;
echo "50" > /proc/sys/vm/vfs_cache_pressure;
echo "90" > /proc/sys/vm/dirty_ratio;
echo "1" > /proc/sys/vm/overcommit_memory;
echo "4" > /proc/sys/vm/min_free_order_shift;
echo "1" > /proc/sys/vm/oom_dump_tasks;
echo "0" > /proc/sys/vm/swappiness
echo "1000" > /proc/sys/vm/dirty_writeback_centisecs;
echo "500" > /proc/sys/vm/dirty_expire_centisecs;
echo "8" > /proc/sys/vm/page-cluster;
echo "3" > /proc/sys/vm/drop_caches
# File-System
echo "10" > /proc/sys/fs/lease-break-time;
echo "32000" > /proc/sys/fs/inotify/max_queued_events;
echo "524288" > /proc/sys/fs/file-max;
echo "256" > /proc/sys/fs/inotify/max_user_instances;
echo "10240" > /proc/sys/fs/inotify/max_user_watches;
# Kernel-Tweaks
echo "1000000" > /proc/sys/kernel/sched_min_granularity_ns;
echo "18000000" > /proc/sys/kernel/sched_latency_ns;
echo "3000000" > /proc/sys/kernel/sched_wakeup_granularity_ns;
echo "0" > /proc/sys/kernel/panic;
echo "1" > /proc/sys/kernel/panic_on_oops;
echo "64000" > /proc/sys/kernel/msgmni;
echo "64000" > /proc/sys/kernel/msgmax;
echo "4096" > /proc/sys/kernel/shmmni;
echo "2097152" > /proc/sys/kernel/shmall;
echo "536870912" > /proc/sys/kernel/shmmax;
echo "524288" > /proc/sys/kernel/threads-max;
echo "500 512000 64 2048" > /proc/sys/kernel/sem;
echo "0" > /proc/sys/kernel/sched_child_runs_first;
# Network Tweaks
echo "524288" > /proc/sys/net/core/rmem_max;
echo "524288" > /proc/sys/net/core/wmem_max;
echo "6144 87380 524288" > /proc/sys/net/ipv4/tcp_rmem;
echo "1" > /proc/sys/net/ipv4/tcp_tw_recycle;echo "6144 87380 524288" > /proc/sys/net/ipv4/tcp_wmem;
fs/sync: Make sync() satisfy many requests with one invocation
Revert "input: lge: use the old 100px finger movement code for CPU frequency”
Revert "drivers: input: disable onlining the second core on screen touch”
Revert "drivers: input: clean up the boospulse call detection funtion."
Revert "drivers: input: instead of calling boostpulse every touch input...”
lge_touch_core: Simpler method of boosting the cpu frequency on touch
intellidemand: Activate Touch Boost
ondemand: Set boosfreq to 1242mhz (for Touch Boost)
cpufreq: intellidemand: Change optimal_freq to 1242mhz
cpufreq: ondemand: Set optimal_freq to 864mhz and sync_freq to 1350mhz
intellidemand: Tweak some values
delete ("/system/lib/hw/power.msm8960.so"); (im UpdaterScript)
msm_fb: display: fix the hang issue caused by solidfill pipe
msm_fb: display: add mfd null pointer and mfd panel_power_on checks
msm: mdp: Do not wait for vsync for command mode panel
msm_fb: Set timeline threshold for command mode to 2
Revert "msm: mdp: Update sync pt. behaviour"
msm: display: command mode panel release fence
msm: mdp: Update sync pt. behaviour
msm: mdp: Change msmfb kworker to kthread
intellidemand: Set Optimal-Freq back to 1242mhz (testing)
ondemand: Set boostfreq to 1026mhz (1242mhz is maybe to high)
intellidemand: Set Sync_Freq backt to 702mhz
acpuclock: Deactivate 864mhz
Revert "cpufreq: smartmax: Test ideal freq 864mhz (we don't need 1026…
ondemand: Set Sync_Freq back to 702mhzsound/soc/codecs/wcd9310.c: expose additional controls
cpufreq: conservative: Enable load tuning (thx myfluxi) (reverted
Revert "arm: mako_hotplug: Add intermediate load level"
Revert "mako_hotplug: Pull check routine optimizations from franco git"
Revert "mako_hotplug: Pull Chalhoubs circular buffer from franco git"
Revert "mako_hotplug: Properly set cpu freq policy on suspend/resume"
cpufreq: Introduce governor load tuning
Revert "mako_hotplug: Resume late from early suspend"
Revert "mako-hotplug: Fixup funtion declaration"
Revert "arm: mako_hotplug: Stop spamming the kernel log buffer"
Revert "arm: mako_hotplug: Unify drivers, Lindent, cleanup interface"
Revert "arm: mako_hotplug: Fix section mismatch"
Revert "arm: mako_hotplug: Import from francoKernel"
ARM: add auto hotplug driver
arm: auto hotplug - wrap all pr_info into the existing debug mode so we
auto_hotplug: enhancements
auto_hotplug: enhancements (rev 2)
auto_hotplug: enable the min_online_cpus value
auto_hotplug: enhancements (rev 3)
auto_hotplug: parameter validation for max_online_cpus
auto_hotplug: stack the deck on auto_hotplug_late_resume to get things
auto_hotplug: rev 4 - let's lean a little more towards performance.
auto_hotplug: Set min cores online to "2" and onlining all cores usin…
Revert "cpufreq: interactive: Enable userspace control for load tuning"
cpufreq: ondemand: Enable userspace control for load tuning
Revert "cpufreq: boost the sampling rate on touch event"
cpufreq: boost the sampling rate on touch event
config: Activate auto_hotplug
Revert "mako: Add support to query cpu status"
Revert "msm: pm: Add support to query cpu status"
Revert "msm: pm-data: Enable powercollapse/suspend_enabled for non-bo…
Revert "msm: pm: Add support for retention on each core"
Revert "msm: hotplug: wait for hotplug completion event from secondar…
Revert "msm: spm: set vdd directly for current cpu"
auto_hotplug: Add suspend_freq
auto_hotplug: Tweaks for battery / Allow higher enable_load_threshold…
cpufreq: ondemand: Fix the boostpulse interface (again)
lge_touch_core: Do not boost touch while suspended
Revert "touch_synaptics: Loop until i2c is awake (thx myfluxi)"
Revert "touch_synaptics: Add delay to init function"
Revert "touch_synaptics: i2c read delay is only needed while suspended"
Revert "touch_synaptics: Give i2c a little time to wakeup, fix sweep2…
touch_synaptics: Loop until i2c is awake
sweep2wake: Cleanup (thx myfluxi)
sweep2wake: disable as default for now
kernel: cgroup_timer_slack: Adaptations for 3.4 kernel
writeback: Fix occasional slow sync(1)
binfmt_elf.c: use get_random_int() to fix entropy depleting
mmc: msm_sdcc: check for pending_resume in SDCC system suspend
sound control 3.x: Initial GPL release for WCD9310 Audio Codec
config: Use XZ instead of GZIP
freezer: set PF_SUSPEND_TASK flag on tasks that call freeze_processes
block: cfq: merge tweaked tunables.
cpufreq: interactive: Set hispeed_freq to 1026mhz
mach-msm: subsystem_restart: Fix CPU detection
board_mako: Adjust throttle temp
touchscreen: tweak some initialization parameters for better UI response
Accuracy Filter Control: export accuracy filter items to userspace
input: touchscreen: change filter parameters courtesy of viking37.
---><-----><------><------><------><------><-------><-----><
-------------------------------------------------------------------------
<<Ultimate Hells Core Development starts now>>
Build Number : v37t1
Added GPU OC to 487Mhz and tweaked it (credits to faux)
---------------------------------------------------------------------------
New Build Numbers : Beta 1
Added reworked blx (credits mathkid95)
Added new build flags
Added/ build with own tool chain
----------------------------------------------------------------------------
New Build Number : Beta 2
-Fixed acpuclock-8064.c (aznrice2k4 )
-New GPU OC config
-CPU OC to 1823MHz (parts used from engstk)
-Max normal freq is 1500mhz
-Fixed blx
-Other minor tweaks and fixes
Downloads
Flash at your own risk !
--------------------------------------------------------------------------------------
-- First Release -- v37
Build by hells, next builds will be build by me
DOWNLOAD THE BEAST
JSS is stable / JWR has Screen tearing-----------------------------------------------------------------------------------------
Hey, so here is a build which was compiled by me !
Its now Beta 1 !
DOWNLOAD NEW BEAST
Code:
Changelog:
New Build Numbers : Beta 1
Added reworked blx (credits mathkid95)
Added new build flags
Added/ build with own tool chain
-----------------------------------------------------------------------------------------
Hey , so finally with the help of my good old friend aznrice2k4 I got it to compile
No testers needed, I tested it
Build Number : Beta 2 (stable)
Changelog:
-Fixed acpuclock-8064.c (aznrice2k4 )
-New GPU OC config
-CPU OC to 1823MHz (parts used from engstk)
-Max normal freq is 1500mhz
-Fixed blx
-Other minor tweaks and fixes
Download new Beast (Beta 2)--------------------------------------------------------------------------------------------------------------------------------------------------------------
New Build : Beta 3
Changelog:
Code:
Let the beast build with custom 4.8 ([B]aznrice2k4[/B])
Update hells_defconfig
ALSA: Remove VOLATILE flag from chmap ctls [B]Subhash C[/B]
ALSA: PCM: channel mapping API implementation [B]Subhash C[/B]
ALSA: PCM: volume API implementation [B]Subhash C[/B]
ASoC: msm: Support setting channel map Multi channel PCM playback [B]Subhash C[/B]
ASoC: msm: Add Support for SRS SS3D [B]Subhash C[/B]
drivers/usb/gadget/Makefile: -Wno-sizeof-pointer-memaccess for android.c
net/bluetooth/hci_conn.c: fix warning: argument to 'sizeof' in 'memcp
Tingwei Zhangcpufreq: ondemand: Boost CPU frequency only for touch input …
Minsung Kimcpufreq: interactive: fix show_target_loads and show_above_hispeed_delay …
Ling Wanmsm: kgsl: Don't do intensive memory recovery when allocating big pages …
Iliyan Malchevadreno: increase cmdbatch timeout to 10 seconds …
Shubhraprakash Dasmsm: kgsl: Use the correct length when looking for address collision …
Shubhraprakash Dasmsm: kgsl: Prevent race conditions when freeing memory …
Shubhraprakash Dasmsm: kgsl: Only reference the rb_node after taking spinlock …
Shubhraprakash Dasmsm: kgsl: Only initialize process structure once …
Shubhraprakash Dasmsm: kgsl: Do not hold memory spinlock when calling find region function …
Harsh Vardhan Dwivedimsm: kgsl: Add a missing mutex unlock …
Fred Fettingermsm: kgsl: generate descriptive names for kgsl-timeline …
Olav Haugangpu: ion: Minimize allocation fallback delay …
Ajay Dudanigpu: ion: Add null-pointer check after allocation …
Rajsh Kemisettimsm: kgsl: Map sync lock variables to every pagetable …
Ajay Dudanikgsl: Add memory barrier to kgsl_iommu_lock_rb_in_tlb iommu operation …
Fred Fettingermsm: kgsl: show timestamp in sync dump …
Rajesh Kemisettimsm: kgsl: Add a check to free the kgsl_timeline object. …
ramgearint_sqrt.c: Correction square root algo with naming
ramgearint_sqrt: Improve 3x faster integer sqrt. …
Shobhit Pandeymsm: vidc: Correct log tagging for kernel messages …
Suresh Vankadaramsm: camera: Fix camera crash in msm_open_config …
Suresh Vankadaramsm: camera: Fix camera crash when ctrl_q is empty …
Suresh Vankadaramsm: camera: Fix mctl release crash issue. …
Praveen ACmsm: camera: Enable pixel line buffer for ispif. …
Aditya Jonnalagaddamsm: camera: Check if client is NULL before calling ion_free …
Dave Chinnersync: don't block the flusher thread waiting on IO …
Deepak Katragaddamsm: cpufreq: Only apply driver limits for scaling_min/max_freq writes …
Saravana Kannancpufreq: Save user policy min/max instead of policy min/max during ho… …
Leon MaLMK: Optimize lowmem_shrink. …
Jason Lowsched: Reduce overestimating rq->avg_idle …
faux123sched: Consider max cost of idle balance per sched domain …
hellsgodsched: Periodically decay max cost of idle balance …
faux123sched: change load balance number to h_nr_running of run queue …
Lei Wensched: change cpu_avg_load_per_task using h_nr_running …
Lei Wensched: change update_rq_runnable_avg using h_nr_running …
Lei Wensched: change pick_next_task_fair to h_nr_running …
faux123sched: change update_sg_lb_stats to h_nr_running …
hellsgodsched: change find_busiest_queue to h_nr_running …
Lei Wensched: change active_load_balance_cpu_stop to use h_nr_running …
Lei Wensched: document the difference between nr_running and h_nr_running …
pboonstoppelsched: Unthrottle rt runqueues in __disable_runtime() …
Neeti Desaimsm: Allow lowmem to be non contiguous and mixed. …
Tingting YangARM: smp: Save CPU registers before IPI_CPU_STOP processing …
Mona Hossain crypto: msm: Fix Uninitialized flags …f492cd6
Matt Wagantall net: flow: Prevent bringing up new CPUs during per-CPU initialization
Flash at your own risk
Download Beta 3-JWR
Download New Beast (B3) JSS
Thanks to hellsgod for the kernel base and the help !
Also thanks to him for this build , since I had some errors with my build server !
Credits:
>> @anarkia1976 <<
>> @hellsgod <<
>> @faux123 <<
>> @morfic <<
>> @franciscofranco <<
>> @ENGstk <<
>> @sid21 <<
>> @mathkid95 <<
>> @aznrice2k4 <<
>> @molesarecoming for color profiles <<
>>Birdman and Goo.im for Buildserver <<
>> @One2thTEXAN for banners <<
>> @BytecodeMe for helping <<
>> @cpu999 for helping <<
If someone feels bad because I forgot him ->PM me
Here are 2 bootanimations made for this kernel by One2thTEXAN
Download
Use this Banner made by One2thTEXAN to show support
Or use mine from #1 post
[/CENTER]
What? Hellscore is here.. Wowww :thumbup:
Sent from my Nexus 4 using Tapatalk 4
Nice man ! So many toys to play...this why I love nexus !!!:thumbup::thumbup:
welcome! really good kernel.
No download links?
TrOjAn
AndrolinRoot said:
Features of this Kernel
Code:
:::4.3 starts from::::
<<Main Features from 4.2 which are mostly also in 4.3>>
ROW Scheduler (default)
SIO
Color profiles
ARM Auto Hotplug
Scheduler-optimizing
-100MV undervolt
UV Interface
288mhz as "low freq"
some not used freq. are removed
faux Sound Control
faux Speaker Amp Control
faux Gamma Control with motley's tweak to get it working with trickstermod
dynamic fsync
USB Force Fast Charging
mako_hotplug 2 (thx myfluxi, franciscofranco)
Scheduling Patches
rq Patches
lmk Patches
pm Patches
S2W Fix (thx myfluxi)
GPU Patches
Charger / Battery Patches
HSIC Patches
O2 optim.
O3 optim.
workqueue Patches
<<I dont remember all>>
<<Ultimate Hells Core Development starts now>>
Added GPU OC to 487Mhz and tweaked it (credits to faux)
What comes next / feature requests
>>BLX from Matrix<<
Click to expand...
Click to collapse
What changes are done in Sleep to wake
& where is the download link
Here comes another toy. =w= Devil snickers~
Hell yeah, had to use google translate every version lool..
thanks for this amazing kernel
Download the beast !
Download hells porn
How's the battery life?
I always wanted to do that.... lol
playya said:
How's the battery life?
I always wanted to do that.... lol
Click to expand...
Click to collapse
If you dont set your min freq. to 1512mhz its super
Finally no more speaking german on the original thread Thnx for bringing hells core tot xda!!!!
Verstuurd vanaf mijn Nexus 4 met Tapatalk 4
AndrolinRoot said:
If you dont set your min freq. to 1512mhz its super
Click to expand...
Click to collapse
Ahhh sooky sooky now gonna test this puppy now...lol damn and I was hoping I could set to 1512... Lol
Serious note good stuff and Thx for the contribution
So far so good...
Tested Touch Control & it works :victory:
Performance is good..Now to test the battery life
Glad to this kernel in the N4 XDA section! Cool
Guys you should know I use his kernel as base and dont maintain it !
If you want features write them here and I will look into them
Nice, testing now
Hey Everyone,
I'm by no means a pro at kernel building but I've put lots of effort into this kernel so I thought I'd share it with you. After a very long inner conflict period I've decided to post in the android development forum instead of the original android development. I've included features of my own as well as patches and other features of many other top notch kernel developers. I would prefer if you make your way over to my source (link below) and read the commits so you can get to know them and how they have contributed but alas I not that naive enough to think any of you really would actually go and do that so I've included a nice feature list in post 2 with proper credits (at least for the big stuff).
I am a huge fan of giving you options which is why I build my kernel with multiple toolchains and multiple sound options for you to test out and decide which option you find works best for you.
I also made a Release Folder that contains kernels that do not contain any CPU or GPU overclock to keep things more stable for you. This kernel is built with UBERTC 4.9.4 since I feel like that give the best battery. Choose this option for stability.
I frequently get asked if this kernel works with the many AOSP projects. The answer is YES! I haven't found an AOSP ROM yet that won't boot with this kernel. The only potential issue is that the ROM you flashed this kernel with has modified the ramdisk from stock or doesn't have a root containing sepolicy for Lollipop. Make sure to flash back to a stock ROOTED kernel and then flash UBER. My kernel uses you ramdisk while flashing for great ROM compatibility but sometimes this backfires.
Do not flash on CM or CM-based ROMs! This kernel is not currently compatible with those "CAF-based" ROMs.
WARNING!!! Even though I don't post anything unless it works (in this case on most if not all AOSP ROMs) I still don't want to be liable for user errors. In other words, if you flash one of these Kernels your warranty is void and I AM NOT RESPONSIBLE for any data loss or bricked devices etc.
For more info see this video
[AOSP 5.1 UBER KERNEL LINKS]
Mirror #1: https://s.basketbuild.com/devs/Cl3Kener/HAMMERHEAD/UBER-L/
Mirror #2: https://renderserver.net/browse?path=Cl3Kener/HAMMERHEAD/UBER-L
Mirror #3: uber.oceighty.co/HAMMERHEAD/UBER-L/
If you still want access to Kitkat Kernels Go to:: https://s.basketbuild.com/devs/Cl3Kener/HAMMERHEAD/UBER/
Comprehensive Changelog of Everything (Aka Source Code)
https://github.com/Cl3Kener/UBER-L/commits/master
Code:
[SIZE=4]
[B][SIZE="6"]UBER Changelogs[/SIZE][/B]
[B]10/03/15[/B]
- 3.4.109
- F2FS updates
- Backlight Dimmer from Kitkat Kernel Returns!
- KCAL updates
- Better BFQ/CFQ tunings
[B]09/18/15[/B]
- Enable BFQIO Cgroup
- Merge android-msm-hammerhead-3.4-lollipop-mr1.1 tag (no significant change)
- Remove UBERTC 4.8.5 Kernel and add UBERTC 5.2.1 Faux and Francosound versions
- Update Toolchains to 9/18/15 Snapshot
[B]09/11/15[/B]
- Returned SELinux Toggle to CFG (it was removed on accident)
- 8555f12 lz4: fix system halt at boot kernel on x86_64
- 264f011 Makefile: sort list of defconfig targets in make help output
- 7cc54ca kbuild: remove warning about "make depend"
[B]09/05/15[/B]
- Merge latest F2FS from upstream
- Kernel source bump to 3.4.108
- Update Toolchains to 9/5 (see github.com/UBERTC for details)
- Other misc bug fixes
[B]5/13/15[/B]
6cb9d79 f2fs: fix counting the number of inline_data inodes
f2f065b f2fs: don not re-lookup nat cache with same nid
189ca9c f2fs: remove unneeded f2fs_make_empty declaration
29b6fe9 f2fs: issue discard with finally produced len and minlen
611b6ee f2fs: introduce discard_map for f2fs_trim_fs
55efe4c f2fs: revmove spin_lock for write_orphan_inodes
30a0e33 f2fs: split find_data_page according to specific purposes
aa6141b f2fs: add need_dentry_mark
11a3834 f2fs: fix race on allocating and deallocating a dentry block
9f96171 f2fs: introduce dot and dotdot name check
e37bfdd f2fs: move get_page for gc victims
4dc9fb0 f2fs: add sbi and page pointer in f2fs_io_info
ccd6bae f2fs: add f2fs_may_inline_{data, dentry}
6779a11 f2fs: clean up f2fs_lookup
b60987f f2fs: introduce f2fs_commit_super
21087dc f2fs: add f2fs_map_blocks
36ec73a f2fs: add feature facility in superblock
a907c38 f2fs: move existing definitions into f2fs.h
06efb1d f2fs: add missing version info in superblock
39ee8dd f2fs: fix not to check IS_ERR for null pointer
aa9f5f4 f2fs: make has_fsynced_inode static
8ef6ea8 f2fs: add offset check routine before punch_hole() in f2fs_fallocate()
5cc5ac1 f2fs: use is_valid_blkaddr to verify blkaddr for readability
b5731af f2fs: fix wrong error hanlder in f2fs_follow_link
41a82f9 Revert "f2fs: enhance multi-threads performance"
74e1c0f Defconfig: Use XZ Compression
3296fd2 Defconfig: Use regular gzip compression
9c0a666 ipv4: Missing sk_nulls_node_init() in ping_unhash().
4213a5d SELinux: ss: Fix policy write for ioctl operations
a317da7 seccomp: Replace BUG(!spin_is_locked()) with assert_spin_lock
73d6b2c nf: IDLETIMER: Adds the uid field in the msg
b0064e6 ARM: add documentation for finding start of physical memory
4609cfd ARM: 8294/1: ATAG_DTB_COMPAT: remove the DT workspace's hardcoded 64KB size
40a96c1 ARM: 8191/1: decompressor: ensure I-side picks up relocated code
f53b231 ARM: compressed/head.S: remove s3c24xx special case
950e423 hashtable: introduce a small and naive hashtable
bd0707b lib/lz4: Pull out constant tables
666f751 SELinux: use deletion-safe iterator to free list
057b63c SELinux: per-command whitelisting of ioctls
e979523 security: lsm_audit: add ioctl specific auditing
b813589 SELinux: Update policy version to support constraints info
d464f89 SELinux: add default_type statements
6be5d3b SELinux: allow default source/target selectors for user/role/range
9529eb0 selinux: add SOCK_DIAG_BY_FAMILY to the list of netlink message types
efff44c selinux/nlmsg: add XFRM_MSG_MAPPING
d1d6e3b selinux/nlmsg: add XFRM_MSG_MIGRATE
1c24c4a selinux/nlmsg: add XFRM_MSG_REPORT
19bf436 selinux/nlmsg: add XFRM_MSG_[NEW|GET]SADINFO
bb0858e selinux/nlmsg: add XFRM_MSG_GETSPDINFO
cfe7f96 selinux/nlmsg: add XFRM_MSG_NEWSPDINFO
27c0a2f pstore: selinux: add security in-core xattr support for pstore and debugfs
7380a43 f2fs:sync with upstream branch
b0afd9f VFS: Make more complete truncate operation available to CacheFiles
[B]4/24/15[/B]
129daf9 Revert "usb-storage/SCSI: blacklist FUA on JMicron 152d:2566 USB-SATA controller"
41003d9 Linux 3.4.107
5af9f19 PCI: Handle read-only BARs on AMD CS553x devices
b167462 lib/checksum.c: fix build for generic csum_tcpudp_nofold
0f3307a mm: fix anon_vma->degree underflow in anon_vma endless growing prevention
419bc8f net: compat: Update get_compat_msghdr() to match copy_msghdr_from_user() behaviour
e370ccd nilfs2: fix deadlock of segment constructor during recovery
26c0d38 spi: dw: revisit FIFO size detection again
79940b6 ntp: Fixup adjtimex freq validation on 32-bit systems
6a5e559 s390/3215: fix tty output containing tabs
84630a5 x86, cpu, amd: Add workaround for family 16h, erratum 793
fc431d8 fsnotify: next_i is freed during fsnotify_unmount_inodes.
c7d8a3b net:socket: set msg_namelen to 0 if msg_name is passed as NULL in msghdr struct from userland.
7fbd1ca sched/rt: Reduce rq lock contention by eliminating locking of non-feasible target
cf11b56 Bluetooth: ath3k: workaround the compatibility issue with xHCI controller
53b3052 staging: comedi: cb_pcidas64: fix incorrect AI range code handling
99ce0af ipvs: rerouting to local clients is not needed anymore
294b66d jfs: fix readdir regression
dd3ef12 pagemap: do not leak physical addresses to non-privileged userspace
418605d Drivers: hv: vmbus: incorrect device name is printed when child device is unregistered
1f833bc nilfs2: fix deadlock of segment constructor over I_SYNC flag
bad8e6c ASoC: sgtl5000: add delay before first I2C access
d481c9e net: sctp: fix passing wrong parameter header to param_type2af in sctp_process_param
faca147 net: sctp: fix NULL pointer dereference in af->from_addr_param on malformed packet
27fb1ba gpio: sysfs: fix memory leak in gpiod_sysfs_set_active_low
407e221 gpio: sysfs: fix memory leak in gpiod_export_link
b9c0ed3a MIPS: Fix kernel lockup or crash after CPU offline/online
383e2c7 caif: remove wrong dev_net_set() call
0a533c8 lib/checksum.c: fix carry in csum_tcpudp_nofold
a096ac4 ALSA: ak411x: Fix stall in work callback
2c43d74 ASoC: atmel_ssc_dai: fix start event for I2S mode
93625b6 MIPS: IRQ: Fix disable_irq on CPU IRQs
b8efe516 x86, mm/ASLR: Fix stack randomization on 64-bit systems
666b625 net: sctp: fix skb_over_panic when receiving malformed ASCONF chunks
af58a41f net: sctp: fix panic on duplicate ASCONF chunks
61294cb vm: make stack guard page errors return VM_FAULT_SIGSEGV rather than SIGBUS
dd37b66 vm: add VM_FAULT_SIGSEGV handling support
31eae22 ipv6: replacing a rt6_info needs to purge possible propagated rt6_infos too
afd1787 net: sctp: fix slab corruption from use after free on INIT collisions
7e346ae ALSA: seq-dummy: remove deadlock-causing events on close
1cc70a9 drm/i915: Only fence tiled region of object.
dbabba0 USB: Add OTG PET device to TPL
32a4cb1 usb-core bInterval quirk
c3dbb4a usb-storage/SCSI: blacklist FUA on JMicron 152d:2566 USB-SATA controller
3e2ff0a nl80211: fix per-station group key get/del and memory leak
9048158 powerpc/xmon: Fix another endiannes issue in RTAS call from xmon
284dbe8 regulator: core: fix race condition in regulator_put()
73b7a4a ASoC: wm8960: Fix capture sample rate from 11250 to 11025
7477cfd spi: dw-mid: fix FIFO size
625dac0 spi: dw: Fix detecting FIFO depth
09089c8 x86, hyperv: Mark the Hyper-V clocksource as being continuous
884c3b1 libata: prevent HSM state change race between ISR and PIO
c5e388a scripts/recordmcount.pl: There is no -m32 gcc option on Super-H anymore
5804da9 libata: allow sata_sil24 to opt-out of tag ordered submission
208d3e5 ALSA: usb-audio: Add mic volume fix quirk for Logitech Webcam C210
33033f8 gpio: sysfs: fix gpio attribute-creation race
cc46bd9 gpio: sysfs: fix gpio device-attribute leak
01ae018 gpiolib: Refactor gpio_export
66f9bf0 gpio: sysfs: fix gpio-chip device-attribute leak
391bbd9 driver core: Introduce device_create_groups
b295f4b sysfs.h: add ATTRIBUTE_GROUPS() macro
d350632 can: dev: fix crtlmode_supported check
685bcb9 ftrace/jprobes/x86: Fix conflict between jprobes and function graph tracing
4f338c7 gpio: fix memory and reference leaks in gpiochip_add error path
67fbd53 mm: fix corner case in anon_vma endless growing prevention
6255515 mm: Don't count the stack guard page towards RLIMIT_STACK
b7bd760 USB: console: fix potential use after free
5e3c147 OHCI: add a quirk for ULi M5237 blocking on reset
e5b68b3 HID: roccat: potential out of bounds in pyra_sysfs_write_settings()
b5f80db mm: protect set_page_dirty() from ongoing truncation
9e2a7ed mm: prevent endless growth of anon_vma hierarchy
cc4a897 mac80211: fix multicast LED blinking and counter
1b6398d Input: I8042 - add Acer Aspire 7738 to the nomux list
d4211e2 Input: i8042 - reset keyboard to fix Elantech touchpad detection
ab8f85c time: adjtimex: Validate the ADJ_FREQUENCY values
e9dbd12 time: settimeofday: Validate the values of tv from user
6973163 sata_dwc_460ex: fix resource leak on error path
c463826 mm: propagate error from stack expansion even for guard page
70946fb USB: cp210x: add IDs for CEL USB sticks and MeshWorks devices
c8eb987 virtio_pci: document why we defer kfree
7586079 virtio_pci: defer kfree until release callback
be42ade virtio: use dev_to_virtio wrapper in virtio
86f0a0b ALSA: hda - Fix wrong gpio_dir & gpio_mask hint setups for IDT/STAC codecs
436f6e5 x86, um: actually mark system call tables readonly
a1c9f2c USB: cp210x: fix ID for production CEL MeshConnect USB Stick
536d010 video/logo: prevent use of logos after they have been freed
4b2d8f9 net: Fix stacked vlan offload features computation
9f9e0eb crypto: af_alg - fix backlog handling
8714253 udf: Check component length before reading it
e8ccb36 x86_64, vdso: Fix the vdso address randomization algorithm
381e190 udf: Check path length when reading symlink
a1d9cdb udf: Verify symlink size before loading it
5e5b0ad udf: Verify i_size when loading inode
aa4a4d8 isofs: Fix unchecked printing of ER records
2beaf0f ocfs2: fix journal commit deadlock
47d92db ALSA: usb-audio: extend KEF X300A FU 10 tweak to Arcam rPAC
c0f882a iscsi-target: Fail connection on short sendmsg writes
5bf2cf1 isofs: Fix infinite looping over CE entries
b43f5a7 storvsc: ring buffer failures may result in I/O freeze
0171dc6 x86/tls: Don't validate lm in set_thread_area() after all
fe0e500 x86/tls: Disallow unusual TLS segments
ccbdf10 genirq: Prevent proc race against freeing of irq descriptors
070cfb0 x86_64, switch_to(): Load TLS descriptors before switching DS and ES
3b6254d ncpfs: return proper error from NCP_IOC_SETROOT ioctl
1f8e97d Btrfs: fix fs corruption on transaction abort if device supports discard
ee88360 KEYS: Fix stale key registration at error path
d33fb04 ALSA: usb-audio: Don't resubmit pending URBs at MIDI error recovery
218ba26 can: peak_usb: fix cleanup sequence order in case of error during init
583aecd can: peak_usb: fix memset() usage
fdfce29 drm/radeon: check the right ring in radeon_evict_flags()
f712352 hp_accel: Add support for HP ZBook 15
e03e5f4 drm/vmwgfx: Fix fence event code
313249d drm/vmwgfx: Don't use memory accounting for kernel-side fence objects
b78be84 iommu/vt-d: Fix an off-by-one bug in __domain_mapping()
59075a8 ath5k: fix hardware queue index assignment
ec453d0 ath9k: fix BE/BK queue order
1e4f9ee ath9k_hw: fix hardware queue allocation
b0003ef serial: samsung: wait for transfer completion before clock disable
f703d74 mfd: tc6393xb: Fail ohci suspend if full state restore is required
ff130a1 USB: cdc-acm: check for valid interfaces
1f9db86 cdc-acm: memory leak in error case
52f7ea1 megaraid_sas: corrected return of wait_event from abort frame path
3c1b66b ASoC: sigmadsp: Refuse to load firmware files with a non-supported version
566423d genhd: check for int overflow in disk_expand_part_tbl()
9a95a6f scsi: correct return values for .eh_abort_handler implementations
e97273c PCI: Restore detection of read-only BARs
2c41cbd drbd: merge_bvec_fn: properly remap bvm->bi_bdev
482d22e driver core: Fix unbalanced device reference in drivers_probe
8ca5f89 UBI: Fix invalid vfree()
2f3b2e1 usb: renesas_usbhs: gadget: fix NULL pointer dereference in ep_disable()
7a2d438 writeback: fix a subtle race condition in I_DIRTY clearing
347ac8b writeback: Move I_DIRTY_PAGES handling
62f5128 eCryptfs: Force RO mount when encrypted view is enabled
bba4bdb i2c: davinci: generate STP always when NACK is received
1b231ad ahci: disable MSI on SAMSUNG 0xa800 SSD
2575c22 ahci: disable MSI instead of NCQ on Samsung pci-e SSDs on macbooks
9219bb3 ahci: disable NCQ on Samsung pci-e SSDs on macbooks
badcbca mm: fix swapoff hang after page migration and fork
81d169a drm/radeon: kernel panic in drm_calc_vbltimestamp_from_scanoutpos with 3.18.0-rc6
90f3dfb sata_fsl: fix error handling of irq_of_parse_and_map
f1c27d0 AHCI: Add DeviceIDs for Sunrise Point-LP SATA controller
e8fb016 drm/i915: Unlock panel even when LVDS is disabled
f67a7bb powerpc/pseries: Fix endiannes issue in RTAS call from xmon
0f0a13e Input: xpad - use proper endpoint type
9ac30f5 usb-quirks: Add reset-resume quirk for MS Wireless Laser Mouse 6000
77ff742 MIPS: Loongson: Make platform serial setup always built-in.
b17289a ALSA: hda - Limit 40bit DMA for AMD HDMI controllers
2568455 usb: xhci: rework root port wake bits if controller isn't allowed to wakeup
1b7b64f USB: xhci: Reset a halted endpoint immediately when we encounter a stall.
52647cb USB: xhci: don't start a halted endpoint before its new dequeue is set
b4205de ARM: 8216/1: xscale: correct auxiliary register in suspend/resume
71a57fa bnx2fc: do not add shared skbs to the fcoe_rx_list
f29bef1 nfsd: Fix slot wake up race in the nfsv4.1 callback code
bc8a39f SUNRPC: Fix locking around callback channel reply receive
496ed1e USB: ssu100: fix overrun-error reporting
454e251 USB: keyspan: fix overrun-error reporting
b80b73b USB: keyspan: fix tty line-status reporting
6327481 usb: serial: ftdi_sio: add PIDs for Matrix Orbital products
54e74b3 iio: Fix IIO_EVENT_CODE_EXTRACT_DIR bit mask
7170965 USB: serial: cp210x: add IDs for CEL MeshConnect USB Stick
cd571b4 spi: dw: Fix dynamic speed change.
a50a1ca f2fs: flush symlink path to avoid broken symlink after POR
4b73e2d f2fs: avoid abnormal behavior on broken symlink
edfd750 f2fs: change 0 to false for bool type
78760c3 Support GCC 6.0
317bb9d LZ4 : fix the data abort issue
be937e1 crypto: sha512 - Expose generic sha512 routine to be callable from other modules
077393f crypto: add crypto_[un]register_shashes for [un]registering multiple shash entries at once
db7f9b3 ARM: add support for kernel mode NEON
fe0a05a ARM: 7837/3: fix Thumb-2 bug in AES assembler code
99c2444 ARM: 7626/1: arm/crypto: Make asm SHA-1 and AES code Thumb-2 compatible
d060373 ARM: add .gitignore entry for sha256-core.S
2511498 arm: crypto: Add optimized SHA-256/224
7f6ad8f crypto: arm/aes update NEON AES module to latest OpenSSL version
bfeb2f7 vfs: make it possible to access the dentry hash/len as one 64-bit entry
ca8a95e vfs: move dentry name length comparison from dentry_cmp() into callers
a0848829 vfs: do the careful dentry name access for all dentry_cmp cases
2387abd vfs: remove unnecessary d_unhashed() check from __d_lookup_rcu
587ae11 vfs: clean up __d_lookup_rcu() and dentry_cmp() interfaces
700622d f2fs: avoid punch_hole overhead when releasing volatile data
b97d018 f2fs: do not recover wrong data index
1444e0f f2fs: do not increase link count during recovery
94a1fbe f2fs: assign parent's i_mode for empty dir
34bce52 f2fs: add F2FS_INLINE_DOTS to recover missing dot dentries
[B]4/04/15[/B]
eb3042e f2fs: fix mismatching lock and unlock pages for roll-forward recovery
63803ca f2fs: limit b_size of mapped bh in f2fs_map_bh
aa01503 msm: mdss: KCAL: Update Kconfig description
d220216 Revert "msm: mdss: KCAL: Check panel power state before applying values"
2ca0f0e crypto: msm: Update clock vote for improved performance
3c0c2ca msm: mdss: KCAL: Update according to linux guidelines and checkpatch.pl
03049a3 msm: mdss: KCAL: Check panel power state before applying values
2c6b7f2 soc: qcom: smd: Fix SMD packet sync loss issue
ed728c1 vfs: read file_handle only once in handle_to_path
2ac20db mm: Fix NULL pointer dereference in madvise(MADV_WILLNEED) support
f86c2e1 f2fs: persist system.advise into on-disk inode
4ebe176 f2fs: avoid NULL pointer dereference in f2fs_xattr_advise_get
eae07f7 f2fs: preallocate fallocated blocks for direct IO
54b3e53 f2fs: enable inline data by default
3778d5c f2fs: preserve extent info for extent cache
9eae818 f2fs: initialize extent tree with on-disk extent info of inode
270d9bf f2fs: introduce __{find,grab}_extent_tree
4d1d685 f2fs: split set_data_blkaddr from f2fs_update_extent_cache
e593abe f2fs: enable fast symlink by utilizing inline data
f545fdf f2fs: add some tracepoints to debug volatile and atomic writes
bab1b76 f2fs: set SBI_NEED_FSCK when encountering exception in recovery
77a1d2e f2fs: avoid wrong f2fs_bug_on when truncating inline_data
e131be1 f2fs: enhance multi-threads performance
3f434ce f2fs: set buffer_new when new blocks are allocated
dc04eca f2fs: fix to cover sentry_lock for block allocation
e6f5b86 f2fs: fix to check current blkaddr in __allocate_data_blocks
b341170 f2fs: fix to truncate inline data past EOF
0f7c2b2 f2fs: fix to calculate max length of contiguous free slots correctly
8b45aaf f2fs: fix unlocked nat set cache operation
2d99836 f2fs: cleanup statement about max orphan inodes calc
276e1f8 f2fs: remove unnecessary condition judgment
fb7e065 f2fs: set the correct place of initializing *res_page
e00264c f2fs: reduce searching region of segmap when set free section
7496d83 f2fs: fix extent cache memory leak
fc94db1 f2fs: relocate Kconfig from misc filesystems
798a549 f2fs: Update for AIO_OPTIMIZATION
0862871 F2FS: Small Fixup
9da735d xfs: introduce a generic shutdown ioctl
0fef042 Update F2FS to Latest
5d05017 Revert "FS: import F2FS"
c7823f7 Revert "Update F2FS"
fbe2f98 Revert "f2fs: fix wrong statistics of inline data"
b894aa8 Revert "F2FS: Update Inode Compatibility"
011f5f3 Revert "f2fs: Fix Compile"
675bc72 ARM: 8160/1: drop warning about return_address not using unwind tables
6a61897 ARM: 8158/1: LLVMLinux: use static inline in ARM ftrace.h
937edd7 gpu:msm: Fix 5.0 compile
7f8067a msm: mdss: Keep KCAL within its own source file [Squashed]
99b7d5b Revert KCAL bits in prepration for update
[B]3/20/15[/B]
- Merge 5.1 Kernel Sources
[B]3/06/15[/B]
18c1482 mmc: Do not build tests
564473b diag: Make fixes to diag_switch_logging
a4a108b Readahead: Optimize divide/multiply by power of 2 using L/R shift
ab96dc0 eCryptfs: Remove buggy and unnecessary write in file name decode routine
5c1fc3f mmc: core: Silence log spam
[B]2/28/15[/B]
- Merged latest Color Drivers for N5 (neobuddy)
- Changed Toolchains from SaberMod (Now partially closed source so that you cannot build for yourself anymore) to an AOSP-based open source toolchain called UBERTC. Many patches from Linaro have been included in source and also some GCC build fix patches from SaberMod to allow for the latest toolchain components. All sources are GPL and can be found [URL="https://github.com/UBERTC/"]https://github.com/UBERTC/[/URL]. New toolchains have less of a tendency to lag in scrolling and other screen transitions in comparison to SaberMod and I think are better suited for UBER.
[B]01/31/15[/B]
- Merged 3.4.106
- Bugfix: Small Potential Memory Leak
[B]01/31/15[/B]
dcd2770 memory hotplug: reset pgdat->kswapd to NULL if creating kernel thread fails
4028fbb memcg: further prevent OOM with too many dirty pages
86aa61a memcg: prevent OOM with too many dirty pages
04848e5 kernel: cgroup: push rcu read locking from css_is_ancestor() to callsite
fed88ee mm: vmscan: remove reclaim_mode_t
28907d4 mm: vmscan: do not stall on writeback during memory compaction
fdc5efe mm: vmscan: remove lumpy reclaim
ecb6e1a mm: remove swap token code
3786e5f sched: Fix reference to stale task_struct in try_to_wake_up()
6ced785 KEYS: close race between key lookup and freeing
3604d7d ARM: pull in <asm/simd.h> from asm-generic
c48e1eb msm: watchdog_v2: Print IRQ during bark
4e46170 ASoC: msm: qdsp6v2: Silence some noise
5466e82 net: wireless: bcmdhd: Silence some unnessecary noise
c726ad0 netfilter: x_tables: Silence some debug info
bd23093 Defconfig: Remove lots of Debugging
5cfb502 Makefile: Make more consistent
ba54a8f Makefile: -O3 instead
1cc151d Makefile: Disable annoying warnings
c8fe6d2 Makefile: Rethink flags and ordering
d5d8089 Makefile: Add -floop-nest-optimize everywhere
d55d009 block: Tune SIO and remove dead code/white spaces
f11eac5 Makefile: Try floop-nest-optimize
[/SIZE]
If you are unsatisfied with UBER you can uninstall it. Here is the link to the uninstaller http://d-h.st/y1k
Features
Code:
* Based upon Google's msm 3.4.y source for Hammerhead
* Updated to 3.4.109 from Kernel.org
* MultiROM Compatible (has Kexec patch)
* Compatible with Stock as well as AOSP projects (CAF-based do not work sorry CM fans, CAF-kernel is just not as stable and battery friendly imao so I'll stay AOSP for now). If it doesn't work on a ROM let me know!!!
* CPU Governors added: Intellidemand, Intelliactive, Adaptive, Lionheart, AbyssplugV2, Ondemandplus, Badass, Wheatley, Hyper, Lazy, PegasusQ, Nightmare, DanceDance, Darkness, Slim, Intellimm, Optimax. and Uberdemand
* GPU Governors: Performance, Ondemand, and Interactive (Franco)
* IO Schedulers: Noop, Deadline, VR, SIO, ROW, CFQ, BFQ, FIOPS, FIFO, ZEN and Tripndroid
* Compiled with Custom Linaro ARM EABI 4.9.3 toolchains (Cl3Kener) (see https://github.com/UBERTC/)
* Compiled with Custom Linaro GNUEABI 4.9.3 (Christopher83)
* Compiled with Custom UBERTC 4.9.3/5.2.1 (Cl3Kener) (see https://github.com/UBERTC/)
* -Ofast optimized with neon and graphite enhancements (Cl3Kener)
* Linaro compiler flags for greater optimization build wide (Cl3Kener)
* Snapdragon & CortexA15 optimizations (Tons of Contributors)
* Non-Stock Hotplug and Thermal regulator (from showp1984)
* Touch Boost - Showp1984 (comes with hotplug)
* GPU OverClock up to 650 MHz (27 MHz is still default idle with lowest frequency being underclocked to 100 MHz) (Cl3Kener)
* Allow CPU OverClock up to 3.0 Ghz (Cl3Kener)
* Allow CPU UnderClock to 96Mhz (showp1984 implementation)
* L2 Cache OverClock (flar2)
* Ramdisk Edits on the fly for greater compatibility. (Strongly based on Showp1984 implement)
* Undervolting Control (Franco)
* LZ4 support implemented kernel wide - fastest compression/decompression available (Cl3Kener)
* Google Snappy Compression/Decompression support (just in case you want it)
* XZ Compression to latest 3.17.y (Cl3Kener)
* KSM (Kernel Samepage Merging)
* Faux Sound (Faux123)
* Franco Sound (Franco)
* Sweep2Wake, Sweep2Sleep, Double Tap 2 Wake (Showp1984 with Faux123 verticle s2w support and flar2 dt2w enhancements)
* Powerkey suspend for S2W/DT2W (Flar2 version)
* Wake timeout for S2W/DT2W/ (Flar2)
* Dynamic and Asynchronous Fsync (Faux123)
* USB Fast Charge with many voltage options (Faux123)
* Gamma Control (Various Contributers)
* Color Control (savoca)
* Fstrim (reduces lag see more: http://man7.org/linux/man-pages/man8/fstrim.8.html)
* ExFat Support (you'll need to load it via this init.d https://www.dropbox.com/s/tfm8k9vmskuhs4v/loadexfat) Updated to latest version (Neobuddy)
* Low Memory Killer - Many patches from Neobuddy
* Zram support upstreamed to 3.17.y branch (Cl3Kener)
* Zram supports lz4 compression now (kernel.org)
* Zcache, and Cleancache support updated to 3.14.y (Cl3Kener)
* BLX - Battery Life Extender (See here http://forum.xda-developers.com/nexus-s/development/mod-battery-life-extender-blx-t1257497) Ported by Ayysir to msm8974 devices
* F2FS file system support from Samsung
* Mount internal storage as CDROM (Frozen Cow)
* Advanced TCP Congestion Options (Veno as default, all 12 from http://kernel.org)
* Stereo Call Recording Support
* Uber.cfg for tuning kernel thanks to @janres155 & @Williamsss
* Many patches to improve various parts of the kernel (see source)
* Full Source including defconfig is available for you use/learn from. (Not a feature but I feel it is important that my source is complete so you can build directly from it if you want to learn and experiment)
JOIN MY DEVELOPMENT COMMUNITY ON GOOGLE PLUS (CLICK LINK) Come join for more fun! I've got some tutorials, ROMs, and other things I share with community members and well.
Installation Instructions
1. For best results a install these kernel after a fresh ROM install (although it still should work if you don't do that)
2. Reboot into recovery (TWRP 2.8+ or compatible recovery)
3. Flash Kernel Zip
4. Reboot and let Settle for ~10 minutes (optional but recommended)
5. Navigate to system/etc/uber_v1.3.cfg using your favorite root file browser and change values based on descriptions to whatever you want.
6. Enjoy!!!
Note: In Android Lollipop while Superuser kinks are still being worked out you may need to reflash root after you flash kernel.
CREDITS & SPECIAL THANKS TO:
Dennis Rassmann - for all of his kernel work. I'm in love with all of his features and you'll find them all in my kernel.
Ayysir - for his wonderful tutorial on making a bash script to build kernels.
Other great kernel devs Francisco Franco, Faux123, Flar2, Neobuddy89, FrozenCow, Christopher83, Savoca, Hellsgod and any other mentioned in the above feature list or changelog - I cherry-pick work of all of the kernel greats!
Google - for kernel base and Android Open Source Project!
Linaro - for some really great toolchain patches!
Code Aurora Forum (CAF) - for some really great kernel patches!
Gnu.org - for always improving the C Compiler for better made code!!!
SaberMod - for making patches to fix any errors in GCC code!
LG - for manufacturing this awesome phone!
UBER Kernel sources can be found at https://github.com/Cl3Kener/UBER-L
Toolchain Sources can be found at https://github.com/UBERTC/
Config Sources can be found at https://github.com/wSedlacek/cfg
Informational Links
Comprehensive Guide to Android Development
Here is a fantastic guide on "Innards" of Kernels
Building a Bash Script to make Kernels
XDA:DevDB Information
[KERNEL][3.4.109][10/03/15] UBER-L | LINARO & UBERTC 4.9.4 -O3 Graphite F2FS, Kernel for the Google Nexus 5
Contributors
Cl3Kener
Source Code: https://github.com/Cl3Kener/UBER-L
Kernel Special Features:
Version Information
Status: Stable
Created 2014-01-27
Last Updated 2015-12-01
Solutions/Ideas to the Most Common Issues
I cannot seem to flash UBER Kernel why is that? Some ROMs come with these build.prop lines which are unacceptable to TWRP but work fine as far as the ROM goes. You will have to remove these lines from the build.prop for it to flash.
dalvik.vm.dex2oat-flags "--compiler-filter=interpret-only"
dalvik.vm.image-dex2oat-flags ""After you have installed the kernel you can re-add these lines to your build.prop. If you don't have these lines in your build.prop it is most likely a bad download.
I have RRs with this kernel but not with others, why is that? I have undervolted some other kernel features besides the cpu that you cannot change to save you battery. On some N5s (since not all are created equal) you may actually have to increase voltages on cpu or else you keep getting RRs. Try +25 across CPUs and see if that fixes your RRs. If not keep going down the list.
Having issues with Undervolting? The chief complaint about this kernel is that "I can't uV as much as I can with other kernels." I have undervolted other kernel features (ie cpu regulators) that you cannot change to save you battery. This makes it hard for you to uV the cpu voltages as far but rest assure you'll still be getting better battery for it. Also, be aware that undervolting is a little dangerous in this kernel because of the potential of data loss when dynamic fsync is enabled. If you do decide to undervolt make a backup first so when your phone crashes you can restore. Also be aware that most of the logs ending in wdog_reset are caused by too much uV so before you post a log that ends in wdog_reset please stop undervolting first to see if the RRs persist. Below -25 uV seems to be the point where most users experience issues. Also keep in mind that voltage is important in benchmarking. Many people are benchmarking at incorrect voltages for their devices. I have to add +25 mV to all values so that it doesn't RR during benchmark. Each phone is a little different so some of you may be fine as is and some of you may need to go +50 mV or even potentially more. You'll have to experiment to see where your phone's "sweet spot" is. I again recommend also disabling Dynamic Fsync until you have figured out where that sweet spot is to prevent data loss.
Why am I having issues with ROMs on MultiROM? From my experiences, Custom Kernels and MultiROM have always not played well together. Flashing a custom kernel on Internal ROM has never been an issue you try and flash a custom kernel on ROMs 2-whatever you have weird permission issues which can cause all sorts of problems for you (apps crashing, RRs, loss of root, etc). This is probably why the kernel sharing feature was added which is good but has it's own set of problems when using UBER. (See post directly below) To reiterate, this is not a bug in UBER or MultiROM just a slight incompatibility between the two we have to overcome by hand.
UBER works fine on Internal ROM but has issues on ROMs 2 and beyond when using MultiROM and sharing UBER why is this? UBER is not specifically geared for use in MultiROM, not because I don't like multiROM but simply because of Uber's nature. UBER uses showp1984's custom msm_mpdecision and thermal which conflict with proprietary mpdecision and thermal regulators and cause RRs if these files are present. During normal kernel flash these files are renamed and don't conflict with UBER. When you share this kernel during ROMs 2 and beyond can still be used safely if you know what you're doing. In order to allow ROMs 2, 3, and beyond to share the kernel you must delete N5 proprietary files found at system/bin/mpdecision and system/bin/thermal-engine-hh when running those ROMs. It is a fairly easy process, just install a Root File Browser, locate then, and delete. Normally in kernel flashing process I rename those files to mpdecision_bck and thermanl-engine-hh_bck for you so you never have to see or worry about them. If you use Sharing Feature on MultiROM you'll have to deal with these yourself. I apologize for this inconvenience but there is nothing I can do from my end. Flashing UBER on ROM 2 breaks it and sharing has problems until you remove these two files.
Why are certain apps crashing on me? Most likely it is due to Frandom. I have implemented Frandom by default in this kernel and to my knowledge I'm the only developer that does that by default. Some apps or mods may not be frandom compatible. Most are 100% compatible but not all. If you notice programs stop opening or are having constant reboots try removing 00_frandom from the init.d folder and reboot. I think for stable releases which I plan on posting on XDA this weekend I will not have frandom implemented by default but in nightlies it will always be implemented. Also if you keep having random reboots this is something to try as well.
Not booting? Maybe you have Ramdisk Incompatibility. This kernel uses your ramdisk. Most of the time that works well. Sometimes it does not. Make sure to flash http://goo.im/devs/Cl3Kener/HAMMERHEAD/KERNELS//STOCK-BOOT_IMAGE-4.4.3.zip and try again if it doesn't boot. If it still doesn't boot make sure to verify that it is not CAF. Some ROMs fail to mention they are CAF-based but they really are.
My phone crashed once during benchmarking or for no apparent reason and now keeps randomly rebooting. My guess is you have Data Corruption. If you crash your phone out benchmarking or have a frandom related RR and you still keep getting RRs you might have data corruption. This usually happens when you have Dynamic Fsync enabled because Fsync is disabled when screen is on. When testing I crash my phone all of the time and apps and things get messed up. Having a backup is good but if you don't want to waste time backing up all of the time you can salvage things still. Here is what I do when I've crashed the phone and continue to get soft reboots: 1) I install SD Maid from the Google Play store. (I have pro version so I can clean more but free version should work well enough) 2) I use SD Maid to clean all of the app data. (don't worry it is smart enough to not loose your passwords so you won't have to resign into your apps) Then I download ROM Manager by Koush. I don't actually use ROM Manager I just think it has the best permissions fixing feature of any app I've tried (including recoveries). I select the option Fix Permissions toward the bottom of the free version. It then prompts a reboot and then I reboot and life is good again.
I have battery drain when nobody else does.... help!!! Install a wakelock detector and figure out what is keeping your CPU awake. If it's an app. Fix permissions, clear app data, reinstall app, disable app, etc. until is stops having issues.
Still have problems? Search my Google+ community in the questions category. If you don't find anything see below:
ERROR REPORTING
I am always open to hearing about your errors although just telling me something went wrong without giving me details does me absolutely no good. So here are my expectations if you do want to complain about something not working:
1. Please list the ROM you are using,
2. The IO scheduler you were using
3. The CPU governor you were using
4. The CPU frequency range
5. What you have done to attempt to fix it.
6. If you were able to simulate it again using the same settings.
7. Anything else you think is applicable to the issue
I would also hope that you would consider trying some of the following things to fix your issue before you ever report it because most of these things will fix the problem without me even having to change a thing.
1) Fix file permissions using a program that does a thorough job. I recommend using the fix file permissions in ROM manager because it is the best I’ve seen. For the record, I don’t actually use ROM manager for anything other than fixing permissions. Please consider trying this first because it tends to fix most of the FC/RR/SOD errors you might have.
2) Make a backup and install a clean version of the ROM you are running and see if you are still experiencing those same errors. You may have corrupted files if you’ve been dirty flashing.
3) If that doesn’t solve it, redownload and reflash, maybe something got corrupted but it still managed to flash. This happens sometimes and I can cause you grief.
4) Pull a logcat. MAKE SURE TO DISABLE DYNAMIC FSYNC BEFORE LOGGING!!! LEAVING IT ENABLED WILL CORRUPT YOUR LOG!I know not everyone knows how to do this but you can learn if you check out this OP or if you aren't comfortable with using terminal commands to pull a log just install Bootlog Uptime and set it up to autocopy log on RR. Opening the program after crash will autocopy your log and you send it to me.
QUICK GUIDE TO TUNING YOUR KERNEL
Thanks to the uber.cfg you no longer need to tune manually because you have the following already in the kernel:
1. BOOT SETTINGS
1.1 KERNEL SWITCH
1.2 GRACE TIME
1.3 WAIT TIMERS
1.4 FILE SYSTEM TRIM
2. CPU SETTINGS
2.1 CPU SETTINGS SWITCH
2.2 CPU FREQUENCY SCALING
2.2.1 CPU FREQUENCY SCALING SWITCH
2.2.2 CPU MAX FREQUENCY
2.2.3 CPU MIN FREQUENCY
2.3 CPU GOVERNOR
2.3.1 CPU GOVERNOR SWITCH
2.3.2 CPU GOVERNORS
2.4 CPU MULTICORE POWER SAVING
3. CPU VOLTAGE SETTINGS
4. HOTPLUG SETTINGS
4.1 MPDECISION SWITCH
4.1.1 MPDECISION SCREEN-OFF MAX FREQUENCY
4.1.2 MPDECISION SCREEN-OFF SINGLE CORE
4.1.3 MPDECISION TOUCHBOOST
4.1.4 MPDECISION MIN CPUS
4.1.5 MPDECISION MAX CPUS
4.1.6 MPDECISION HOTPLUG CONTROL
4.1.7 MPDECISION UNPLUG CONTROL
5. I/O SETTINGS
5.1 I/O SCHEDULER
5.2 I/O READ SPEED
5.3 I/O READ SPEED FOR SD CARD
6. GPU SETTINGS
6.1 GPU SETTINGS SWITCH
6.2 GPU FREQUENCY SCALING
6.2.1 GPU MAX FREQUENCY
6.2.2 GPU MIN FREQUENCY
6.3 GPU GOVERNOR
6.3.1 GPU GOVERNORS
6.3.2 GPU UP THRESHOLD
6.3.3 GPU DOWN THRESHOLD
7. GAMMA SETTINGS
7.1 GAMMA PRESET
7.2 BACKLIGHT DIMMER
7.2.1 BACKLIGHT DIMMER SWITCH
7.2.2 MINIMUM BRIGHTNESS
8. SOUND SETTINGS
8.1 SOUND ENGINE
8.2 FRANCO SOUND SETTINGS
8.2.1 FRANCO MIC INPUT LEVEL
8.2.2 FRANCO CALL OUTPUT LEVEL
8.2.3 FRANCO SPEAKER OUTPUT LEVEL
8.2.4 FRANCO HEADPHONE OUTPUT LEVEL
8.3 FAUX SOUND SETTINGS
8.3.1 FAUX MIC INPUT LEVEL
8.3.2 FAUX MIC INPUT LEVEL FOR CAM
8.3.3 FAUX SPEAKER OUTPUT LEVEL
8.3.4 FAUX HEADPHONE OUTPUT LEVEL
8.3.5 FAUX POWER AMP LEVEL
8.3.6 FAUX LOCK
9. MEMORY SETTINGS
9.1 ZRAM SETTINGS
9.1.1 ZRAM SWITCH
9.1.2 ZRAM COMPRESSION
9.1.3 ZRAM DISK SIZE (MB)
9.2 VIRTUAL MACHINE SETTINGS
9.2.1 SWAPPINESS
9.2.2 DIRTY RATIO
9.2.3 DIRTY BACKGROUND RATIO
9.2.4 DROP CACHES
9.2.5 FS WRITEBACK DELAY MODE
9.3 KERNEL SAMEPAGE MERGING
10. WAKE SETTINGS
10.1 WAKE CONTROL SWITCH
10.2 DOUBLE TAP TO WAKE
10.3 SWEEP TO WAKE/SLEEP
10.4 POWERKEY SUSPEND
10.5 WAKE TIMEOUT
11. MISCELLANEOUS SETTINGS
11.1 TCP CONGESTION CONTROL
11.2 DYNAMIC FSYNC
11.3 POWER SUSPEND
11.4 VIBRATION INTENSITY
11.5 USB FAST CHARGE
11.5.1 FAST CHARGE SWITCH
11.5.2 FAST CHARGE LEVEL
11.6 BATTERY LIFE EXTENDER
12. MODULES
12.1 FRANDOM
12.2 EXFAT
I still left these commands for people that like to see them anyways:
Set Color Profiles
See here http://forum.xda-developers.com/showpost.php?p=52926016&postcount=866
Dynamic Fsync
To enable - echo 1 > /sys/kernel/dyn_fsync/Dyn_fsync_active
To disable - echo 0 > /sys/kernel/dyn_fsync/Dyn_fsync_active
KSM (Kernel Samepage Merging)
To enable - echo "1" > /sys/kernel/mm/ksm/run
To disable - echo "0" > /sys/kernel/mm/ksm/run
USB Fast Charge
To enable - echo 1 > /sys/kernel/fast_charge/force_fast_charge
This makes USB to computer connections transfer current the same as the wall charger. (Classical version)
Faux123 added the a ability to change currents to 500 900 1200 1500 2000. Enable by doing this
To enable custom - echo 2 > /sys/kernel/fast_charge/force_fast_charge
Then
echo 1500 > /sys/kernel/fast_charge/fast_charge_level
change value 1500 to whatever you want (as long as it's one of those 5 values)
To disable - echo 0 > /sys/kernel/fast_charge/force_fast_charge
Set Default IO Scheduler
IO Acceptable values are bfq, cfq, deadline, fifo, fiops, noop, row, sio, vr, zen
echo "bfq" > /sys/block/mmcblk0/queue/scheduler
Set Default CPU Governor
Acceptablevalues are adaptive, badass, intelliactive, dancedance, wheatley, abyssplugv2, ondemandplus, intellidemand, interactive, conservative, userspace, powersave, lionheart, ondemand, performance and others mentioned in kernel features above.
echo "1" > /sys/devices/system/cpu/cpu0/online;
echo "ondemand" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor;
echo "1" > /sys/devices/system/cpu/cpu1/online;
echo "ondemand" > /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor;
echo "1" > /sys/devices/system/cpu/cpu2/online;
echo "ondemand" > /sys/devices/system/cpu/cpu2/cpufreq/scaling_governor;
echo "1" > /sys/devices/system/cpu/cpu3/online;
echo "ondemand" > /sys/devices/system/cpu/cpu3/cpufreq/scaling_governor;
Backlight Dimmer
N is disabled, Y is enabled.
echo "N" > /sys/module/lm3630_bl/parameters/backlight_dimmer
Touch Boost
Toggle 0 is disabled 1 is enabled.
echo "0" > /sys/kernel/msm_mpdecision/conf/boost_enabled
Double Tap To Wake
There are three options here:
0 is disabled
1 is normal dt2w (bottom half of screen)
2 is full screen dt2w
echo "0" > /sys/android_touch/doubletap2wake
Sweep2Wake/Sweep2Sleep
This one is tricky because there are two files to change. If you want both only run
echo "1" > /sys/android_touch/sweep2wake
If you only want sweep2sleep you'll have to run this as well.
echo "1" > /sys/android_touch/s2w_s2sonly
To disabled run both run these commands but with 0s instead.
GPU Governor Toggle
Acceptable values are "performance" "simple" or "ondemand". Ondemand is default so I placed simple here. Performance will freeze system is placed at full OC (at lest for me so be careful!)
echo "ondemand" > /sys/class/kgsl/kgsl-3d0/pwrscale/trustzone/governor
Frequency options (Use values on the left for init.d script)
533333000-> 533 Mhz
487500000-> 487 Mhz
450000000-> 450 Mhz
389000000-> 389 Mhz
320000000-> 320 Mhz
200000000-> 200 Mhz
150000000-> 150 Mhz
Set Max GPU:
echo "320000000" > /sys/devices/fdb00000.qcom,kgsl-3d0/kgsl/kgsl-3d0/max_gpuclk
Set Min GPU:
echo "150000000" > /sys/devices/fdb00000.qcom,kgsl-3d0/kgsl/kgsl-3d0/min_pwrlevel
Pwrkeysuspend (disables s2w, dt2w)
# 0 = disabled, 1 = enabled
echo "1" > /sys/module/qpnp_power_on/parameters/pwrkey_suspend
Wake Timeout of S2W/DT2W
Note: # is in minutes (not seconds)
echo "#" > /sys/android_touch/wake_timeout
Load ExFat Module
insmod /system/lib/modules/exfat.ko
SET DEFAULT BOTTOM CLOCK SPEEDS
(If you want to set max change crom scaling_min_freq to scaling_max_freq on bottom four) Acceptable values any of the clock speeds.
echo "96000" > /sys/devices/system/cpu/cpufreq/ondemand/optimal_freq
echo "96000" > /sys/devices/system/cpu/cpufreq/ondemand/sync_freq
echo "96000" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
echo "96000" > /sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq
echo "96000" > /sys/devices/system/cpu/cpu2/cpufreq/scaling_min_freq
echo "96000" > /sys/devices/system/cpu/cpu3/cpufreq/scaling_min_freq
Vibrator Level
Stock Value is 63. Range of acceptable values is 0-100
echo "63" > /sys/class/timed_output/vibrator/amp
Dirty Ratios
# dirty_background_ratio default is 10 (background meaning screen is off usually)
echo "20" > /proc/sys/vm/dirty_background_ratio
# dirty_ratio default is 20.
echo "40" > /proc/sys/vm/dirty_ratio
Set MPDecision Values
Note: Only change these values after you've played with them in your favorite kernel tuning app. I recommend figuring out your settings then finding these files with a root browser then you can fill these init.d lines in with your root browser of choice.
echo "1" > /sys/kernel/msm_mpdecision/conf/enabled
echo "0" > /sys/kernel/msm_mpdecision/conf/boost_enabled
echo "300000" > /sys/kernel/msm_mpdecision/conf/idle_freq
echo "4" > /sys/kernel/msm_mpdecision/conf/max_cpus
echo "1" > /sys/kernel/msm_mpdecision/conf/min_cpus
echo "12" > /sys/kernel/msm_mpdecision/conf/nwns_threshold_0
echo "0" > /sys/kernel/msm_mpdecision/conf/nwns_threshold_1
echo "25" > /sys/kernel/msm_mpdecision/conf/nwns_threshold_2
echo "7" > /sys/kernel/msm_mpdecision/conf/nwns_threshold_3
echo "30" > /sys/kernel/msm_mpdecision/conf/nwns_threshold_4
echo "10" > /sys/kernel/msm_mpdecision/conf/nwns_threshold_5
echo "0" > /sys/kernel/msm_mpdecision/conf/nwns_threshold_6
echo "18" > /sys/kernel/msm_mpdecision/conf/nwns_threshold_7
echo "1" > /sys/kernel/msm_mpdecision/conf/scroff_single_core
echo "140" > /sys/kernel/msm_mpdecision/conf/twts_threshold_0
echo "0" > /sys/kernel/msm_mpdecision/conf/twts_threshold_1
echo "140" > /sys/kernel/msm_mpdecision/conf/twts_threshold_2
echo "190" > /sys/kernel/msm_mpdecision/conf/twts_threshold_3
echo "140" > /sys/kernel/msm_mpdecision/conf/twts_threshold_4
echo "190" > /sys/kernel/msm_mpdecision/conf/twts_threshold_5
echo "0" > /sys/kernel/msm_mpdecision/conf/twts_threshold_6
echo "190" > /sys/kernel/msm_mpdecision/conf/twts_threshold_7
Set Thermal Values
Go to /sys/kernel/msm_thermal/conf/ in a root file browser and change the values
I recommend that you figure out what you like and then create your own init.d script like I did. Here is the link to my example Script. I have 99 appended to the front so that it will run last resetting any previously set settings.
https://copy.com/cyApOWNSjPs1
Here is my init.d tweak folder. https://www.dropbox.com/sh/88sqwe9q018pcne/xCzZBKAJTt Make sure to give them a number in the front if you decide to add them. Like 01_blahblah or 02_blahblah.
will it work in all roms (aosp,cm,...)?
Nice. I'll give it a try (stock rom).
Finally.. Thanks man.. Will try ASAP and let you knw
Sent from my Nexus 5 using Tapatalk
mondaza said:
will it work in all roms (aosp,cm,...)?
Click to expand...
Click to collapse
Read the op man
Sent from my Nexus 5 using Tapatalk
Djmattox08 said:
Read the op man
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
What Is this read and how can I do it.lol.All seriousness this is a badass kernel.
Sent from my Nexus 5 using Tapatalk
What about changelog?
Bam ROM installed and working fine.Thanks for the work and greetings from Spain, HTCMania.
I've been running the linaro 4.7.4 version of Uber on Blue Lightning and it works great! Is there any reason I should switch to the 4.8.3 version?
Jephre said:
I've been running the linaro 4.7.4 version of Uber on Blue Lightning and it works great! Is there any reason I should switch to the 4.8.3 version?
Click to expand...
Click to collapse
Yeah, it's got bigger numbers
Sent from my Nexus 5 using Tapatalk
Chester welcome! I fcking love it kernels..... Flashing now
Sent from my Nexus 5 using Tapatalk
sinkster said:
Yeah, it's got bigger numbers
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Harhar, very funny
Sorry, I'm not very technical, but I'm interested in learning more about kernels. Aside from the bigger numbers, is there some sort of performance or efficiency difference between the two? Pros and Cons of each?
Much appreciated!
iPsychoGeek said:
What about changelog?
Click to expand...
Click to collapse
Well the op said that if a ROM didn't boot up on this kernel we are to let you know. Well guess what? Latest cm nightly doesn't boot up. That's because cm decided to merge a bunch of caf stuff and now virtually all custom kernel are unbootable. Just saying. :crying:
Jsparta26 said:
Well the op said that if a ROM didn't boot up on this kernel we are to let you know. Well guess what? Latest cm nightly doesn't boot up. That's because cm decided to merge a bunch of caf stuff and now virtually all custom kernel are unbootable. Just saying. :crying:
Click to expand...
Click to collapse
Hope the OP can fix this
---------- Post added at 10:56 PM ---------- Previous post was at 10:10 PM ----------
Does anyone else ecounter random reboots when locking the screen?
What scheduler and governor are you guys using on 4.8.3 for better performance? There's so many to choose from and I'm having a difficult time telling which ones work better.
Good kernel
Sent from my Nexus 5 using Tapatalk
t1.8matt said:
What scheduler and governor are you guys using on 4.8.3 for better performance? There's so many to choose from and I'm having a difficult time telling which ones work better.
Click to expand...
Click to collapse
It's basically suck it and see. Here's a description of governors: http://forum.xda-developers.com/showthread.php?t=1792369
Sent from my Nexus 5 using Tapatalk
Hey Everyone!
So once again I'm having to rebuild my kernel thanks to CM. I uploaded yesterdays kernels early this morning after good day of testing with Stock. I have now created a branch for Stock as a backup and I guess we'll see if somehow the new kernel with CM updates is still compatible later. I hope to knock out the whole things today which will be difficult because it looks like somewhere in the ballpark of 200-250 commits. Assuming I have an error 1 every 10 that should only take me about several hours to do.
Anyways, so someone asked about changelogs. It's not that I don't believe in super detailed changelogs but I find that unless it's a tangible features nobody really understands/cares which is why I just include major features on Post #2. I've include the link to my github source which I find it best because iif you don't understand the commit message you can just click on the commit and read about the changes. Or I guess if you really wish I can just grab a log and paste it here like this
Code:
eac11e6 workqueue: fix mismatch
364f2a7 lib: spinlock_debug: increase spin dump timeout to one second
8f8e924 lib: spinlock_debug: increase spin dump timeout
1b51e62 sched/debug: Make sysrq prints of sched debug data optional
e3aab22 msm: cpuidle: use format string in snprintf
aba2b89 msm: gdsc: Make enable/disable function clock controls symmetric
83ddecf ARM: dts: msm: Add additional GDSC devices
5c07136 msm: subsystem_restart: Correct state transition even in absence of PIL
36f3fa0 msm: Fix NULL pointer dereference in sensors ADSP driver.
76b41a8 msm: msm_bus: Don't touch ID array in case of invalid IDs
ca44047 msm: msm_bus: fix memory leak in msm_bus_fabric_probe
26a3de9 msm: Fix compiler error due to CONFIG_HIGHMEM being disabled
7c14347 msm: Update the kernel log messages
19dd8b4 msm: msm_bus: Fix the type error causing bandwidth overflow
76bb790 add extra free kbytes tunable
638a2f6 ARM: Flush the caches for non panicking CPUs in case of a kernel panic
1ca0aca ARM: smp: fix incorrect per-cpu definition of regs_before_stop
82cd77a ARM: smp: Save CPU registers before IPI_CPU_STOP processing
1344e17 ARM: 7816/1: CONFIG_KUSER_HELPERS: fix help text
70f5ee2 ARM: 7819/1: fiq: Cast the first argument of flush_icache_range()
522611e ARM: Fix FIQ code on VIVT CPUs
c50dd00 ARM: Fix the world famous typo with is_gate_vma()
a354187 ARM: fix nommu builds with 48be69a02 (ARM: move signal handlers into a vdso-like page)
7249d66 ARM: fix a cockup in 48be69a02 (ARM: move signal handlers into a vdso-like page)
85e9ad0 ARM: make vectors page inaccessible from userspace
f56fc17 ARM: move signal handlers into a vdso-like page
cdbe879 ARM: allow kuser helpers to be removed from the vector page
ec85740 ARM: update FIQ support for relocation of vectors
8e3a8a1 ARM: fiq: change FIQ_START to a variable
6dc1962 ARM: move vector stubs
065cf0f ARM: poison memory between kuser helpers
b3e9875 ARM: poison the vectors page
a2a12a7 ARM: 7735/2: Preserve the user r/w register TPIDRURW on context switch and fork
c18c81f ARM: 7693/1: mm: clean-up in order to reduce to call kmap_high_get()
2902c6e ARM: dts: msm: Remove dual configuration for CPU on msm8974
bf41f92 msm: msm_bus: Changes for QOS computation at BIMC
212375b msm: msm_bus: Change priority overrides based on master configuration
571edf5 ARM: dts: msm: remove ebi cache dump reservation for 8974
1b752b9 coresight: enable flush-on-flushin for periodic flush to usb
6655519 coresight: use dma_alloc_coherent for allocating tmc-etr memory
ae85721 coresight: Add support for byte counter interrupt feature
62c4004 coresight: add lpae support for coresight tmc driver
d2e3216 ARM: dts: msm: remove contiguous etr memory reservation support for 8610
fc30c37 ARM: dts: msm: remove contiguous etr memory reservation support for 8226
8e08231 ARM: dts: msm: remove contiguous etr memory reservation support for 9625
465f943 ARM: dts: msm: remove contiguous etr memory reservation support for 8974
84f8b02 ARM: dts: msm: modify memory reservation requirements for tmc-etr on 8610
ebbb2e9 ARM: dts: msm: modify memory reservation requirements for tmc-etr on 8226
63d10d8 ARM: dts: msm: modify memory reservation requirements for tmc-etr on 9625
04eb909 ARM: dts: msm: modify memory reservation requirements for tmc-etr on 8974
4cdbd69 ARM: dts: Enable additional GDSC collapse modes based on HW version
e67d6ee workqueue: Remove gcwq_has_idle_workers
70a7f5d workqueue: simplify CPU hotplug code
5627e14 workqueue: remove CPU offline trustee
0ba7786 workqueue: don't butcher idle workers on an offline CPU
7fdf3cb workqueue: reimplement CPU online rebinding to handle idle workers
afd342d workqueue: drop @bind from create_worker()
f601fe0 workqueue: use mutex for global_cwq manager exclusion
153b22f workqueue: ROGUE workers are UNBOUND workers
8beff10 workqueue: drop CPU_DYING notifier operation
0a5bb32 Defconfig: SMH
0384859 Revert " DRIVERS: SLIMBUS: Initial OC of Slimbus"
Those were my changes yesterday. (I having a feeling most of you just skipped over it)
As far as which do I think is better I personally like bleeding edge (and it seems like most of you do too) so I run Linaro 4.8.3. To me it feels a little snappier (on stock that is, I use stock for any of the battery life tests etc). Battery life seems to be about the same between the two though so again it's not like a big deal one way or another. I just like to give you all options instead of only making one kernel. Because I have build scripts and a fast computer it takes me about 5 minutes to build one kernel so I can make both in about 10 minutes. That's no big deal for me. The part that takes the time is the patching, coding, tweaking, and testing.
Speaking of testing, I still haven't really figured out my dream IO and CPU Gov combo yet. I've been playing around alot and hopefully some of you will too. I can tell you that I always default to CFQ or BFQ with Ondemand since I really like those combos but I am also starting to like several other combos. If you find a combo you think is awesome please post it and a screenshot if you want to convince us it is good for battery or whatnot.
Anyhow, enjoy the 1/27 kernel from yesterday! I'll be working on a CM compatible kernel today.
Cheers!
Cl3Kener
Hi, all.
This is a kernel based on Cm12.1 . /CM13
All Optimizations Added To Improve Battery Life And Prevent Compromising Of performance AND giving you a Smooth And Fast Experience As Compared To A Stock Aosp Base
LETS KEEP THIS FAST AND SIMPLE GUYS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features (Cm12/12.1):-
-Built With UBER TC gcc 6.0
-Based on Linux kernel 3.4.110
-Optimizations To Boost Performance and Reduce Drain:-
-g0, -fivopts, -fno-inline-function optimizations
-Graphite Optimizations
-O3 Optimizations
HOSTCXXFLAGS:- :-
-O3
-fgcse-las
-fgraphite
-floop-flatten
-floop-parallelize-all
-ftree-loop-linear
-floop-interchange
-floop-strip-mine
-floop-block
-Wall
-Wundef
-Wstric
-prototypes
-Wno
-trigraphs
-fno-strict-aliasing
Cpu Governors:-
-interactive
-performance-
-ondemand
-ondemandplus
-impulse
-zzmove
-pegasusq
-nightmare
-intellimm
-slim
-smartmax_eps
-smartmax
-wheatley
-intellidemand
-zzmove
-userspace
-powersavee
-conservative
-lionheart
- I/O schedulers:-
-Zen
-TripnDroid
-Bfq
-Cfq
-deadline
-noop
-row
Other Main Features
- disabled Add Random, CRC, I/O Stats and Rotational for better performance
- KCAL SUPPORTED
- Fast Charge Support
- Franco Sound Control
- input touch boost enabled
-Thermal core control toggle
- MpDecision Hotplug
- fsync enabled
- optimized TCP congestion algorithm:reno and cubic
- Adreno Idler For GPU
- GPU stats for each frequency
- lowerd GPU voltages
-f2fs support
-Sweep2Sleep
-Kexec hardboot supported
-Always based on latest OnePlus One kernel sources
-Double Tap To wake
-GPU idle frequency 27 Mhz added
-Ext4 File system tweaks
-init.d support
Features (CM13):-
-Built With UBER TC gcc 6.0
-Based on Linux kernel 3.4.110
-Optimizations To Boost Performance and Reduce Drain:-
-g0, -fivopts, -fno-inline-function optimizations
-Graphite Optimizations
-O3 Optimizations
HOSTCXXFLAGS:- :-
-O3
-fgcse-las
-fgraphite
-floop-flatten
-floop-parallelize-all
-ftree-loop-linear
-floop-interchange
-floop-strip-mine
-floop-block
-Wall
-Wundef
-Wstric
-prototypes
-Wno
-trigraphs
-fno-strict-aliasing
Cpu Governors:-
-interactive
-performance-
-ondemand
-ondemandplus
-impulse
-zzmove
-pegasusq
-nightmare
-intellimm
-slim
-smartmax_eps
-smartmax
-wheatley
-intellidemand
-zzmove
-userspace
-powersavee
-conservative
-lionheart
- I/O schedulers:-
-Zen
-TripnDroid
-Bfq
-Cfq
-deadline
-noop
-sio
-row
Other Main Features
- disabled Add Random, CRC, I/O Stats and Rotational for better performance
- KCAL SUPPORTED
- Fast Charge Support
- Franco Sound Control
- input touch boost enabled
-Thermal core control toggle
- Zen Decision Hotplug
- MpDecision Hotplug
- fsync enabled
- optimized TCP congestion algorithm:reno and cubic
- Adreno Idler For GPU
- GPU stats for each frequency
- lowerd GPU voltages
-f2fs support
-Sweep2Sleep
-Kexec hardboot supported
-Always based on latest OnePlus One kernel sources
-Double Tap To wake
-GPU idle frequency 27 Mhz added
-Ext4 File system tweaks
-init.d support
Flashing instructions:
- backup your boot.img (just in case)
- flash Zip
- reboot And Enjoy
Confirmed working roms [CM 12.1 based roms Only .No CAF version Atm]:
Mostly all CM 12.1 based ROMs .unless they have a different init.d script
-You Tell me-
You like my work?
Feel free to donate: Donate-Link
Downloads( See 2nd Post)
Changelog[See 2nd Post]
I recommend Synapse combined with UKM for Kernel Tuning
Synapse Play Store Link
Render-UKM
You Can Also Use Kernel Adiutor if You Do not wish to Install Synapse
A big Thanks To :
@RenderBroken
@franciscofranco
@faux123
@ak
@Lord Boeffla
@RobbieL811, @dorimanx,
@arter97
@akhilnarang
Source Code:https://github.com/ResurrectionRemix-Devices/android_kernel_oneplus_msm8974
WARNING!!
Code:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
A lot.
DOWNLOADS
V1.x:-
Recommended for CM12.X Roms
V1
v1.1
v1.2
v1.3
V1.4
V1.5
V1.6
V2.X:-
Recommended for CM12.X/ CM 13 Roms
v2.0
V2.1
V2.2
v2.3
V2.5
2.6
V2.7
V2.8
2.9
V3.X:-
Recommended for CM13 Roms Only
v3.0
V3.1
V3.2
V4.X:-
Recommended for CM13 Roms Only (after 20160130)
V4.0
V4.1 (Stable)
V5.X
V5.0(stable)
CHANGELOG:-
Code:
20160624_v5.0:-
[COLOR="Indigo"]All Updates From CM
Bacon: Enable Fast Charge
ZenDecision: Disable By default
msm: zen_decision: Don't set default settings in zd_probe
msm: zen_decision: Missed f(x) name change
msm: zen_decision: Only call INIT_DELAYED_WORK once
msm: zen_decision: change queue_delayed_work_on to queue_delayed_work
msm: zen_decision: Use WQ_UNBOUND and max_active = 1 when allocating WQ
msm: zen_decision: remove unnecessary logic
msm_zen_decision: some cleanups
msm: zen_decision v2.0
msm_zen_decision: disable by default
msm_zen_decision: use per-cpu mutex to synchronize hotplug operations
msm_zen_decision: General fixes and cleanup
Bacon:defconfig:Enable Fast Charge
fastcharge: limit the max charge level to 2100 mA
fastcharge: backported and adapted for OnePlus One
fastcharge: qpnp-charger: remove mA from sysfs phase II
Update QCOM charger values from OPPO source
Sync with KitKat charge standard 3000mah battery
power: qpnp-charger: allow vinmin to be lowered to 4.0 V
fastcharge: qpnp-charger: updated to the latest v1.1
fastcharge: qpnp-charger: remove "mA" from sysfs
fastcharge: qpnp-charger: Charge level interface
[/COLOR]
[B][COLOR="Red"]20160217_v4.1:-
Revert "USB: ANDROID: Implement dynamic pm_qos voting based on USB activity( Fixes Ticks during Audio Playback)
ASoC: msm: qdsp6v2: Move asm list init before apr registration
ASoC: msm: qdsp6v2: Correctly free ASM no wait queue
perf: Fix corruption of sibling list with hotplug …
msm: perf: Protect buffer overflow due to malicious user …
qseecom: Fix issue related to retrieving pipe for PFE
Revert msm8974-oppo: Optimize wakeup delay for JDI panel
[/COLOR][/B]
[B][COLOR="DarkSlateGray"]20160130_v4.0:-
--Rebase Entire Kernel again for Improved Stability
--Updated and minimized defconfig
--Fix KCAL invert colors option
--Removed USB fastcharge(causes Instability)
synaptics_dsx_i2c: Improve resume latency
msm8974-oppo: Optimize wakeup delay for JDI panel
soc: qcom: rq_stats: Pass correct cpu id to update_average_load function
soc: qcom: rq_stats: remove the redundant iowait check
cpufreq: Sync on thread migration optimizations
cpufreq: ondemand: Remove input boost
rq_stats: Fix usage of cpufreq APIs
soc: qcom: rq_stats: Always show idle time left
cpufreq: Check current frequency in device driver
msm: sps: Register SPS IRQ with IRQF_NO_SUSPEND flag
mmc: sdhci: convert ADMA descriptors to a coherent allocation
mmc: block: Backport HS400 changes from 3.10 …
input: synaptics_dsx: Send KEY_POWER for double-tap event
msm: kgsl: set the correct max_state
devfreq: Use policy create/remove events instead of governor
PM / Wakeup: Use rcu callbacks for better performance
msm: kgsl: Wake gpu up on the max freq when using the performance gov
msm: kgsl: Replace jiffy sampling with usec
msm: kgsl: set the profile max_state correctly
msm: kgsl: Delay the first devfreq status read
Adjust to latest cm commits
[/COLOR][/B]
[B][COLOR="Purple"][COLOR="Purple"]20160110_v3.2:-
Enable frequency min/max setting and define start frequencies
(MAX :2457600 MIN:300)(Possible fix to Cpu freq not sticking)
Enable UV
neon+hard optimizations
crypto: arm/aes update NEON AES module to latest OpenSSL version …
ARM: 7835/2: fix modular build of xor_blocks() with NEON enabled …
ARM: crypto: add NEON accelerated XOR implementation …
arm: crypto: Add optimized SHA-256/224
block: Fix sticky scheduler also when multiple mmc are available
msm: mdss: Change lcd notifier to work on OnePlus One backlight driver
cpufreq: Remove wrong max freq hardlimit initialisation
cpu: Core control performance improvement …
cpufreq: add additional hardening to ensure min/max freqs and governor
cpufreq: intellimm - fix issue with updating tunable multi_phase_freq
cpufreq: Allow disabling hard limit check for min and max cpu freq
cpufreq: Workaround to make governors sticky and not to be overwritten
block: Workaround to make schedulers sticky and not to be overwritten
cpufreq: Workaround to make max cpu freq sticky
cpufreq: hardlimit for min cpu frequency initialisation fixed
cpufreq: add CONFIG_MSM_CPU_FREQ_SET_MIN_MAX functionality back to back
cpufreq: CPU undervolting interface (for backported MSM 3.10 devfreq)
cpu: Extend cpu core control by having an option to link core4 online
cpufreq: hardlimit for min cpu frequency configurable by core
cpu: Implement cpu core control …
clock-krait-8974: Expose PVS level via sysfs
tcp_output: set initial TCP window size to 64K (speed improvement)
cpufreq: hardlimit for min cpu frequency configurable by core …
random: change entropy levels to only doubled (both read and write)
random: increase entropy levels (both read and write)[/COLOR][/COLOR][/B]
[B][COLOR="Green"]20160105_v3.1:-
Input: optimize events_per_packet count calculation …
msm: camera: isp: Process stats buffer followed by AXI buffer …
msm:camera:isp: Make AB and IB equal for performance reasons …
msm: camera: Fix to release cci clocks …
msm: camera: Fix state machine for camera sensor subdevs …
msm: camera: Adding interface for power operations in actuator driver …
camera_oppo_v2: Factory fix for CCI race condition …
msm: camera: Handle race condition on stream buffer ops …
msm: jpeg: Make _msm_jpeg_open and _msm_jpeg_release atomic …
msm: cpp: Remove redundant kref get in cpp …
PM: don't use [delayed_]work_pending() …
cpuidle: Wakeup only cpus for which qos has changed. …
msm: lpm-levels: Apply QoS requests only to relevant cpus. …
msm: kgsl: Vote for new IRQ specific QoS request …
qcom: msm: event-timer: Add eventimer migration framework …
qos: Pass the list of cpus with affected qos to notifer …
QoS: Enhance framework to support cpu/irq specific QoS requests …
workqueue: Fix workqueue stall issue after cpu down failure …
workqueue: clear POOL_DISASSOCIATED in rebind_workers() …
All Updates from CM
Stability Improved Big time![/COLOR][/B]
[COLOR="Blue"]20151231_v3.0:-
-Rebased Entire kernel to match with cm sources
-Removed Junk Code in kernel to improve stability
-Kernel Now Compiled with UBER TC 5.3
-Prima Drivers updated to 1.6
-All Changes included by CM-
--Imrpoved Overall Stability [/COLOR]
[COLOR="Red"]20151208_v2.9:-
--Updated and Optimized for Android 6.0.1_r3-> CM13
--prima: Import release LA.BF.1.1.3_rb1.5 (update for Wifi Drivers)
--Merged All CM changes
--Imrpoved Overall Stability [/COLOR]
[COLOR="YellowGreen"]20151205_v2.8:-
--Introduce Zen Decision Hotplug as Requested by users--
-Update Ramdisk for Latest Cm13 Sources-
-Fix More Random Freeze Issues-[/COLOR]
[COLOR="Purple"]
20151127_v2.7:-
--Updated All Chnages to Match With CM13
--Updated USB Keyboard Support for Cm13
--Added SIO scheduler
--Added Sweep2wake Gesture
--Revert "msm: mdss: Acquire lock for source format b/w line and block mode(Top suspect for random Freezes according to Steve)
-ipv6: clean up anycast when an interface is destroyed …
-ipv4, fib: pass LOOPBACK_IFINDEX instead of 0 to flowi4_iif …
-net: ipv6: Add sysctl entry to disable MTU updates from RA
-bacon: Enable FiiO HID Quirk …
-hid: Add driver for FiiO USB DAC [/COLOR]
20151116_v2.6:-
-updated all changes for cm -
-Updated GPU code-
[COLOR="Red"]20151111_v2.5:-
-Updated from Linux 3.4.67->3.4.110
Revert "tick: Cleanup NOHZ per cpu data on cpu down"
wlan: Address buffer overflow due to invalid length
Merged All CM13 Changes[/COLOR]
[COLOR="Purple"]20151105_v2.3
--Updated All CM changes
--Fix Some SElinux Issues
--Backport Gcc Version to 5.2.1 (6.0 Gcc wont Boot Now)
printk: fix regression in SYSLOG_ACTION_CLEAR …
kmsg: use do_div() to divide 64bit integer …
kmsg: export printk records to the /dev/kmsg interface …
printk: convert byte-buffer to variable-length record buffer …
Revert "printk: fix buffer overflow when calling log_prefix function … …
USB: gadget: android: Integrate f_midi USB MIDI gadget driver
USB: gadget: f_mtp: Fix integer overflow when transferring large files. …
usb: gadget: audio: Fix problem resuming playback on alt interface ch… …
USB: gadget: mtp: Fix hang in ioctl(MTP_RECEIVE_FILE) for WritePartia… …
USB: gadget: midi: Fix deadlock unbinding driver while it is in use …
selinux: Android kernel compatibility with M userspace …
selinux: extended permissions for ioctls …
security: add ioctl specific auditing to lsm_audit …
selinux: remove unnecessary pointer reassignment …
Revert "security: lsm_audit: add ioctl specific auditing" …
Revert "SELinux: per-command whitelisting of ioctls" …
Revert "SELinux: use deletion-safe iterator to free list" …
Revert "SELinux: ss: Fix policy write for ioctl operations" …
arm: mm: support ARCH_MMAP_RND_BITS. …
mm: mmap: Add new /proc tunable for mmap_base ASLR. …
net: fix iterating over hashtable in tcp_nuke_addr()[/COLOR]
[COLOR="Blue"]20151028_v2.2:-
-Backport to Linux kernel 3.4.67 to fix boot issues (for now)
-Updated All Cm changes-
-More Patches To improve Battery Drain and Reduce Power Consumption[/COLOR]
[COLOR="Green"]20151027_v2.1:-
-Merged CM changes Upto 2015/10/27-
-Updated Ramdisk-
[/COLOR]
[COLOR="Red"]20151025_v2.0:-
-Updated to Cm13-
-Initial Release-
[/COLOR]
[COLOR="DarkGreen"]20150107_v1.7:-
--Add USB keyboard Support
-Updated Ramdisk
- usb-gadget: support USB keyboard-[/COLOR]
[COLOR="Blue"]20151025_v1.6:-
-Linux Sublevel Update 3.4.109->3.4.110-
-Updated Ramdisk-
[/COLOR]
[COLOR="SeaGreen"]20151018_v1.5:-
-Fixed Some vsync Issues-
-Improved Standby Time due to Nvidia Patches-
-Updated Ramdisk-
[/COLOR]
[COLOR="Orange"]20151008_v1.4:-
msm: mdss: Remove DCS backlight delay …
msm: mdss: kcal: Only apply updates on index 0 …
msm: mdss: kcal: Use PCC for negative display mode
msm: mdss: KCAL: Send a pp display commit when changes are made …
[/COLOR]
[COLOR="Green"]20151005_v1.3:-
[B]clock-krait-8974: Expose SPEED level via sysfs
clock-krait-8974: Expose PVS level via sysfs
Enhance power efficiency: Series of patches from NVIDIA on some critical blocking code paths to allow the CPU to relax instead of busy spinning thus lowering the load_average and lowering power consumption.[/B][/COLOR]
[COLOR="Blue"]20151001_V1.2:-
[B]Fix Freezes Caused by Fsync
Revert "fsync as default" …
cpufreq: limiter: add frequency limiter driver …
tcp_cubic: do not set epoch_start in the future …
tcp_cubic: better follow cubic curve after idle period[/B][/COLOR]
[COLOR="Red"]20150928_V1.1:-
[B]Implement Fastcharge
fastcharge: backported and adapted for OnePlus One
sound: add sound control to increase headphones, speaker and mic gain
arm: use -mtune=cortex-a15 for Krait targets
msm: mpm: disable debugging
mdss: use an interruptible thread on edp to reduce load_average
Added fsync on/off support. (default on)
[/B]
[/COLOR]
[B]20150927_V1.0:-
-Intitial Release-
[/B][/B][/B][/B]
Screenshots
last
Flashed this over EOS and it feels nice.. Thanks..
Sent from my A0001 using XDA Premium 4 mobile app
Setting.Out said:
Flashed this over EOS and it feels nice.. Thanks..
Sent from my A0001 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks for confirming that's its working with EOS .will add it to working list
Awesome kernel!
Thank you very much
Added to OnePlus One index thread:
[INDEX] OnePlus One Resources Compilation Roll-Up
UPDATE
20150928_V1.1:-
Implement Fastcharge
fastcharge: backported and adapted for OnePlus One
sound: add sound control to increase headphones, speaker and mic gain
arm: use -mtune=cortex-a15 for Krait targets
msm: mpm: disable debugging
mdss: use an interruptible thread on edp to reduce load_average
Added fsync on/off support. (default on)
@varund7726, hi......i'm on RR now. Can i flash this kernal or tz kernal is already present in RR??
himanagendra said:
@varund7726, hi......i'm on RR now. Can i flash this kernal or tz kernal is already present in RR??
Click to expand...
Click to collapse
Havent released a new build so youll have to flash this one manually
@varund7726 it would be great if you make UKM support to use Synapse with this kernel.
It will give proper detailed controls to the users.
darshan_dex said:
@varund7726 it would be great if you make UKM support to use Synapse with this kernel.
It will give proper detailed controls to the users.
Click to expand...
Click to collapse
If you have the UKM zip flashed,This will work with synapse
Testers needed
Guys I have made some changes in ipv6 filters
Those having an ipv6 network.can you test if all is OK?
I don't have an ipv6 network to test
Thanks ,nice work
Please add charge control support! (Manual adjustment of AC and USB charger rates)
elementalfusion said:
Please add charge control support! (Manual adjustment of AC and USB charger rates)
Click to expand...
Click to collapse
which kernel has it?
ill cherrypick necesarry commits and add it and give appropriate credits
varund7726 said:
which kernel has it?
ill cherrypick necesarry commits and add it and give appropriate credits
Click to expand...
Click to collapse
Boeffla & AK Kernels has that implementation in their kernel.
deepu458 said:
Boeffla & AK Kernels has that implementation in their kernel.
Click to expand...
Click to collapse
Its Already implemented .check synapse
Sent from my A0001 using Tapatalk
varund7726 said:
Its Already implemented .check synapse
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
OOh Im sry Varun, i was using Kernel auditor app and can u guide me which tab section might have this setting? so that i can enable.
⋆⋆⋆⋆⋆⋆⋆⋆⋆⋆⋆
⋆⋆⋆ tn2009_kernel ⋆⋆⋆
⋆⋆⋆⋆⋆⋆⋆⋆⋆⋆⋆
By Tamerlan2009Kernel Supports F/I/S/K/L/T/W8 variants of 920 AND 925 devicesThe kernel had spent a lot of time in order to satisfy all. This kernel is built to appeal to users who want something really high-quality and stable with a broad customization capabilities. If you wish to use this kernel in a rom , feel free! Although I would love it if you let me know just for my own curiosity. emphasis was placed for maximum performance and battery life.
Features:
1. Changes in the kernal
- based on the latest sources COI9 G925F
- Build on gcc 5.2.1 UBERTC (01.11.2015);
- deep sleep fix;
- Smoothen GPU throttling levels;
- fix memory leak in gpiod_sysfs_set_active_low;
- fix memory leak in gpiod_export_link;
- optimization MakeFile and other files
- optimization workqueue
- optimization zswap
-added many new tweaks / optimization to improve RAM.
- memory leak fixed
-A lot of changes config of the kernel;
-Included Input booster.
- ARM64 readahead: fault retry breaks mmap file read random detection;
- Remove + sign from kernel version;
- fs/dcache.c: Fix the too small buffer for dname;
- Fixup! mm: fix aio performance regression for database caused by THP;
- Async I/O latency to a ssd greatly increased, 34% gain (Creds: kleikamp);
- mmc: disable CRC check for better performance;
- drivers/mmc: spi CRC configurable;
- PM / sleep: Fix memory leak in pm_vt_switch_unregister();
- tcp cong: westwood & htcp builtin and add hstcp & hybla & vegas;
- tcp: replace bic by westwood as default;
- CONFIG_EXYNOS5_DYNAMIC_CPU_HOTPLUG_SLEEP_PREPARE set to 1 for better stand-by battery life
- Faster lzo compression
- Added a new kernel compression lz4;
- Full support for ext4 and f2fs;
- rework f2fs - Linux 4.4 merge window;
- cpufreq: Remember last policy min/max on cluster restart
- block: disable add_random for more performance on SSD's
- wireless: dhd: Enable standby ARP and multicast packet filters
- mailbox: Separate APM CPU cluster voltages and fix debugfs output
- Added latest version of driver POWERSUSPEND
- Included schedule workqueues to save energy
-tweaks and optimize the interactive Governor, cpu standard
- GApps wakelock fix
- enable ld fix for cortex-a53 errata 843419;
- Included configs to improve the sound (g928f);
- Ported the driver from random Linux 4.2+;
- full NTFS R/W support (installed total commander and the plugin and use the flash drive with the ntfs file system);- enable USB OTG support)
- fs/dyn_sync_cntrl: dynamic Fsync control v1.5;
- fs/dyn_sync_cntrl: on by default;
-Optimization make all the kernal files;
- A new driver LMK (Lowmemorykiller);
- UI lags fixed with binder patch;
- NVIDIA's power-efficiency improvement commits applied;
- disable GCC SRA optimization;
- increase AES interleave to 4x;
- Improve ext4 и fuse;
- Enable standby ARP and multicast packet filters;
- rcu: Move SRCU grace period work to power efficient workqueue;
- firmware: use power efficient workqueue for unloading and aborting fwload;
- usb: move hub init and LED blink work to power efficient workqueue ;
- net: rfkill: move poll work to power efficient workqueue;
- net: wireless: move regulatory timeout work to power efficient workqueue;
- net/ipv4: queue work on power efficient wq;
- switch: arizona: Use power efficient workqueue;
- rtmutex: Fix deadlock detector for real;
- sched/__wake_up_sync_key(): Fix nr_exclusive tasks which lead to WF_SYNC clearing;
- Readahead: Optimize divide/multiply by power of 2 using L/R shift;
- readahead: Fix an error (thx ramgear);
- Async I/O latency to a ssd greatly increased, 34% gain (Creds: kleikamp);
- fixup! mm: fix aio performance regression for database caused by THP;
- mm: fix aio performance regression for database caused by THP;
-Disabled all the junk in the kernel (unused drivers, ramdisk compression, sedulity, Governor, etc.);
- per-thread vma caching;
- Improve drivers gpio;
- Improve drivers keyboard;
- Add power-aware migration decision making
- power migration: Refactor the hysteresis scales
- Implement task packing for small tasks in HMP systems
- tweaks dm-hotplug (before the tests with the kernel need to log in to Synapse and see if the maximum frequency set for the processor, and also put on 0 undervolting).
- the kernel source code is fully fixed not a single error, and warnings note (perfect code).
2. Changes in ramdisk:
- spoilramdisk (COI9) +my changes
- SE Linux set to permissive (will prevent private mode from working)
- Full init.d scripting support
-removed the red line when the phone is boot(SE Android enforsing);
- support engineering(samsung loaders;
- поддержка port ROM S6 Edge + and Note5
- Changed ramdisk compression in lzo;
- SeLinux is fully disabled;
- full support for Synapse
- SQLITE
- ensure cores to be online on boot
- boost onlined cpu;
- Auto-install Synapse
-Full support for ext4 and f2fs multiboot;
- Improving and automatic tuning of file system (fstrim);
- Optimization and tweaks RAM;
- automatically remove KNOX
3. Control via Synapse :
A57 CPU
- CPU temperature
- A57 big Cores Frequency Scaling
live frequency
MAX: 2100 MHz
MIN: 800 MHz
- HPM voltage control (UNDERVOLTING)
- A57 big Cores voltage control
- CPU governors
interactive (default)
userspace
performance
- CPU governor tunables
A53 CPU
- A53 LITTLE Cores Frequency Scaling
live frequency
MAX: 1500 MHz
MIN: 400 MHz
- HPM voltage control (UNDERVOLTING)
- A53 LITTLE Cores voltage control
- CPU governors
interactive (default)
userspace
performance
CPU governor tunables
GPU
- GPU stats
Current clock freq
Live Frequency Utilization (load)
- Time in state
- GPU power policy control
coarse_demand (default)
demand
always_on
- GPU frequency scaling
- GPU Governor
Default
Interactive (default)
Static
Booster (more graphic and benchmark performance)
- GPU Interactive Governor tunables
highspeed clock
highspeed load
highspeed delay
-I/O Schedulers
CFQ default(tweaked for SSD)
NOOP
Storage read-ahead (256 KB)
- General IO tuneable
Add random
IO stats
Rotational
No merges
RQ Affinity
- I/O scheduler tunables
AUDIO
(Sound Control by AndreiLux)
- Jack media volume control
L/R channel volume
mono mixer
- Main Equalizer
- Advanced Stereo Equalizer
NETWORK
- TCP congestion control
All available enabled.
Default = westwood+
- Screen mirror/allshare cast fix control (enabled)
- Clean WIFI Lease
- TCP/IP network security
- 3G DNS speed & security tweak
Google
OpenDNS
Comodo, Level3
Norton_DNS
Smart_Viper
REBOOT
- Reboot device
- Recovery Mode
- Download Mode
- Power Off
- Clear Synapse Data & Reboot
- Restart Synapse
Led indicator
- on/off fading led
FS
- Information about the partitions on the phone and their file systems
- tweaks
Backup/restore
- Save and restore your settings Synapse
Thanks to:
AndreiLux
faux123
Linaro
arter97
Xileforce
g.lewarne
and a lot of other people I forgot.
Changelog:
Code:
[B][I]v.5.2 [/I][/B] (Universal)
- Kernel Supports F/I/S/K/L/T/W8 variants of 920 AND 925 devices.
- kernel with all prior versions and changes;
- add sweep2sleep (control via Synapse);
- add IPV6 Optimistic Detection (control via Synapse);
- add USB storage controls - you can connect your phone to PC, CD-rom, etc. (control via Synapse).
[B][U]v.5.1[/U][/B]
- Sources COI9 G925F;
- Completely rewritten kernal;
- Completely rewritten ramdisk;
- Removed a lot of junk;
- Compression ramdisk gzip;
net/neighbour: queue work on power efficient wq;
- aio: Skip timer for io_getevents if timeout=0;
- sched/fair: Implement fast idling of CPUs when the system is partially loaded;
- futex: Implement lockless wakeups;
- locking/rtmutex: Implement lockless top-waiter wakeup;
- A kernel with all prior versions and changes;
- Sort of happened to build into the kernel tweaks for the RAM!
- At the moment is the kernel for me the best performance, savings and tweaks.
- Update kernel will return a standard video driver from G925F COI9.
[U][B]v.5.0[/B] [/U]
- compute time-average nr_running per run-queue;
- Re-compute time-average nr_running on read;
- network speed tweak;
- governor: Be friendly towards latency-sensitive bursty workloads;
- Introduce new relation for freq selection Introduce CPUFREQ;
- Replace CPUFREQ_RELATION_L with C (interactive governor);
- add quickwakeup driver (from Motorola);
- always mount partitions as noatime and nodiratime;
- process: drecrease time to enter sleep ;
- Increase hash table size for better performance ;
- sensorhub: reduce wakelock time;
- implement readpages() to optimize sequential read ;
- Move clock sync work to power efficient workqueue;
- remove WQ_POWER_EFFICIENT from kblockd;
- LOAD_FREQ (4*HZ+61) avoids loadavg Moire;
- pass readahead info down to the i/o schedule ;
- cpufreq: add underclock;
- updated the files and applied a lot of tweaks to cpufreq_stats - dm_cpu_hotplug - freq_table - speedstep-lit - speedstep-sm - cpufreq_interactive - cfq-iosched;
- Added ROW iosched and set as default;
- Control voltage and overclocking GPU (100 - 852 Mhz);
- add dynamic read-ahead
- Improvements to RAM;
- Many improvements ramdisk
[/B]
.
Downloads:
V.5.2
Mod Edit link removed
XDA:DevDB Information
tn2009_kernel for the Samsung Galaxy S6\S6 EDGE
Contributors
-=RaZoR=-
Version Information
Status: Stable
Current Stable Version: v.5.2
Created 2015-12-04
Last Updated 2015-12-06
Welcome ?
Great. Always nice to see a new kernel. Going to test it.
Flashed it. Will test it with default settings first.
Nice. Will try !!
welcome ! i will try it
Welcome! I will try it. Thanks =]
Very happy to see another developer here for S6/Edge.
do everything possible to make you glad
When scrolling through Facebook its giving glitches. Will test some more. Hmmm its only with the Facebook app.
Oké after a reboot its gone. Strange
Awesome work,dev! Really i get a wonderful multitasking,i will report later for battery life! Again,great work. Thanks
Sent from my SM-N920C using Tapatalk
work in 925i?
core720 said:
work in 925i?
Click to expand...
Click to collapse
this kernel is made only for SM-G920F\SM-G925F but may work on other models. if you still decide to put for your SM-G925I before installing make a backup.
So far so good Good to see another project!
-=RaZoR=- said:
this kernel is made only for SM-G920F\SM-G925F but may work on other models. if you still decide to put for your SM-G925I before installing make a backup.
Click to expand...
Click to collapse
Yeah it works on g925i
Attinderkahlon said:
Yeah it works on g925i
Click to expand...
Click to collapse
great! any problems bugs?
Sources?
Have been using this kernel for a few weeks now, and it's fantastic. Please post your sources in the OP though, so you don't get shut down again!!!
nofam said:
Have been using this kernel for a few weeks now, and it's fantastic. Please post your sources in the OP though, so you don't get shut down again!!!
Click to expand...
Click to collapse
don't worry it's not need! the kernal of each time will only get better and better:laugh:
-=RaZoR=- said:
great! any problems bugs?
Click to expand...
Click to collapse
Haven't faced any yet...
Everything is alright.
Nice kernel. Had a bad standby time overnight. Will see what happend
Erik1805 said:
Nice kernel. Had a bad standby time overnight. Will see what happend
Click to expand...
Click to collapse
This!
-=RaZoR=- said:
don't worry it's not need! the kernal of each time will only get better and better:laugh:
Click to expand...
Click to collapse
i really impressed with this kernel but still you must follow xda rules < XDA-Developers and the GPL > if you want this thread still alive bro.