[29/03/17][twrp recovery][v3.1.0] - Note Edge Android Development

[RECOVERY] [06/16/16] TWRP 3.1.0 - TeamWin Recovery Project
TeamWin is proud to present TWRP 3.0.2-0 for the Samsung Galaxy Note EDGE (Exynos/Qualcomm International)!
Youtube video: http://www.youtube.com/watch?v=RIvWVS_Rkxo
Full TeamWin credits are on the TWRP page on the TeamWin website: http://teamw.in/project/twrp2
Introduction:
Team Win Recovery Project or twrp2 for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added a lot of our own features. It's a fully touch driven user interface , no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Key Features:
Touchscreen driven with real buttons and drag-to-scroll
XML-based GUI that allows full customization of the layout true theming!
Settings are saved to the sdcard and persist through reboots
Ability to choose which partitions to back up and which to restore
Ability to choose to compress backups now with pigz (multi-core processor support for faster compression times)
Onscreen keyboard
Decryption of /data
Easy selection of internal/external storage
See changelog below for new features
In addition to the above new features, TWRP features a scripting engine that allows an app to send commands to the recovery for the recovery to perform during startup. We call this scripting engine OpenRecoveryScript. This engine will be put to use immediately in the GooManager app. GooManager will be able to install recoveries automatically for most supported devices. The app will also let you choose to install multiple zips from within Android, wipe cache & dalvik, and run a backup.
We are looking for other talented developers, themers, and device maintainers if they are interested in helping with a free, open source project.
Download
In Attached Files. It's zip files.Flash via custom recovery
Changelog 22 Feb
-TWRP 3.0 (lot of change)
-Build with CM13.0
-Fix some minor bug
-Add full support for F2FS format
Changelog for 3.0.3.x
Build recovery from last source cm-14.1
Changelog 3.1.0
Update recovery from last commit in twrp/cm-14.1 for 915F/915FY/915G (for the moment only)
XDAevDB Information
915F 915FY 915T 915W8 915G 915P 915R4 915V 915TMO TWRP, Tool/Utility for the Galaxy Note Edge
Contributors
micky387
my source code: https://github.com/micky387
Version Information
Status: Stable
Created 2015-06-07
Last Updated 29-03-2017

Here TAR version.
You can Flash it by ODIN (in AP or PDA) :good:
EDIT
28/03/2017
Update 915F/915FY/915G to 3.1.0
29/03/2017
Add Tmo and Can variant

Thank works beautifully.
SM-N915FY
kernel: r16
http://forum.xda-developers.com/note-edge/orig-development/tw-emotroid-team-htcspain-t3111963
Rom: v3
http://forum.xda-developers.com/note-edge/development/rom-wip-note-edge-n915f-nk5-deodexed-t2977321

You`re the man. Thanks. I didn`t have time to flash anything but so far it`s working great.

Just tried it on rooted stock custom. Works like a charm. Nice job.

Thanks guys. Nobody test in T-Mobile variante ?

micky387 said:
Thanks guys. Nobody test in T-Mobile variante ?
Click to expand...
Click to collapse
I'm on T-Mobile. Just running a rooted basic ROM right now. Just flashed a theme is all.

micky387 said:
Thanks guys. Nobody test in T-Mobile variante ?
Click to expand...
Click to collapse
I installed on my T-mobile, and seems like it's working without any problems. I'm already made a backup and finished without a hiccup. Thank you for your work.
Sent from my SM-N915T using Tapatalk

@micky387
Great work!
May I update the guide?

Thanks all. Yes you can update your guide. So if all is all right,i can put T-Mobile in stable and build another variant.

Link's death
Information on TWRP 2 Theming - http://teamw.in/project/twrp2themers

Fooox1 said:
Link's death
Information on TWRP 2 Theming - http://teamw.in/project/twrp2themers
Click to expand...
Click to collapse
Yes. It's new twrp website and all are not uploaded

I'm going to try this on my spring variant any reason not to

Dont worry. I have build for sprint variant. It's in upload.
After,i build for verizon variant

Thank you so much! Looking forward to testing out the Sprint variant.

OK. So OP updated.
PLease read carefully OP. I take lot of my free time to write it and build .So please,dont pm me for nothing
I have build twrp for all variant device.
For device "in test" please test and report here if it working or not and say what version do you download.Thanks.
ATTENTION FOR USERS 915F and 915FY download again recovey in OP. I have fixed permission for theming.
Other variant still ok

Can any of the variants be tested on a n915g?

Beetle84 said:
Can any of the variants be tested on a n915g?
Click to expand...
Click to collapse
Sorry for mistake name. 915DT (tbltedt) is 915G. I have edited OP

micky387 said:
Sorry for mistake name. 915DT (tbltedt) is 915G. I have edited OP
Click to expand...
Click to collapse
Legend! Thanks mate.

Beetle84 said:
Legend! Thanks mate.
Click to expand...
Click to collapse
You can hit THANKS button if you like it

Related

[RECOVERY][YP-G70] TWRP v2.8.0.0 [METICULUS]

bigbiff said:
Youtube video: http://www.youtube.com/watch?v=RIvWVS_Rkxo
Full TeamWin credits are on the TWRP page on the TeamWin website: http://teamw.in/project/twrp2
Introduction:
Team Win Recovery Project or twrp2 for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added a lot of our own features. It's a fully touch driven user interface , no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Key Features:
Touchscreen driven with real buttons and drag-to-scroll
XML-based GUI that allows full customization of the layout true theming!
Settings are saved to the sdcard and persist through reboots
Ability to choose which partitions to back up and which to restore
Ability to choose to compress backups now with pigz (multi-core processor support for faster compression times)
Onscreen keyboard
Decryption of /data
Easy selection of internal/external storage
See changelog below for new features
In addition to the above new features, TWRP features a scripting engine that allows an app to send commands to the recovery for the recovery to perform during startup. We call this scripting engine OpenRecoveryScript. This engine will be put to use immediately in the GooManager app. GooManager will be able to install recoveries automatically for most supported devices. The app will also let you choose to install multiple zips from within Android, wipe cache & dalvik, and run a backup.
We are looking for other talented developers, themers, and device maintainers if they are interested in helping with a free, open source project.
Theming:
Information on TWRP 2 Theming - http://teamw.in/project/twrp2themers
Known Issues:
CWM backups are not compatible - please make a fresh backup in TWRP as soon as you have flashed it
Source Code:
GitHub - https://github.com/omnirom/android_bootable_recovery
Gerrit Instance - http://gerrit.omnirom.org
If you have made your own twrp build for an unsupported device, please let us know. We might add your build to the list of unofficial builds. Bear in mind that we are working hard to add more devices and we may add your device to our official build list later.
Support:
Click http://webchat.freenode.net/?channels=twrp for live support or join us in #twrp on Freenode IRC servers
Click to expand...
Click to collapse
SPECIAL NOTE: "Alternative recoveries" only work with ROM's built after 20140510 and only on the Nutella Kernel.
Download: meticulus.co.vu
XDA:DevDB Information
TWRP for Galaxy Player 5, Tool/Utility for the Samsung Galaxy Player 4.0, 5.0
Contributors
Meticulus
Version Information
Status: Testing
Created 2014-09-05
Last Updated 2014-09-11
Dude you are awesome
Sent from my YP-G70 using XDA Free mobile app
also work with beanstalk last build ?? btw great job again :good:
lildhiel08 said:
also work with beanstalk last build ?? btw great job again :good:
Click to expand...
Click to collapse
Yep?
Meticulus said:
Yep?
Click to expand...
Click to collapse
btw ur new rom bro ? nexus5 wel it work for switch internal
lildhiel08 said:
btw ur new rom bro ? nexus5 wel it work for switch internal
Click to expand...
Click to collapse
Its not my ROM. Its @kykint ☺
Meticulus said:
Its not my ROM. Its @kykint ☺
Click to expand...
Click to collapse
oh ..sorry bro
Status 7 error
edit: nevermind, I didn't go thru the alternative recovery install procedure...duh
Hi Meticulus,
Thanks for all you do !!
When I try to install, I get "This package is for m470 devices; this is a "YP-G70" "
beeewell said:
edit: nevermind, I didn't go thru the alternative recovery install procedure...duh
Hi Meticulus,
Thanks for all you do !!
When I try to install, I get "This package is for m470 devices; this is a "YP-G70" "
Click to expand...
Click to collapse
I double checked everything... looks like you downloaded the wrong one. Make sure to download from here: http://www.meticulus.co.vu/p/twrp-2630-for-galaxy-player-5.html
EDIT: alternative recovery procedure not needed, just flash in current recovery. m470 is Hisense Sero 7 Pro.... Definately downloaded the wrong one...
Meticulus said:
I double checked everything... looks like you downloaded the wrong one. Make sure to download from here: http://www.meticulus.co.vu/p/twrp-2630-for-galaxy-player-5.html
Click to expand...
Click to collapse
Thanks again. That's exactly what I did !!! :good:
All I am receiving is cloud storage when I try to download recovery.
iselfseeallah said:
All I am receiving is cloud storage when I try to download recovery.
Click to expand...
Click to collapse
You need to either "Request the Desktop site" or install the MEGA app from the playstore.:highfive:
Not, I will do with out.
OP updated with new link...
Meticulus said:
OP updated with new link...
Click to expand...
Click to collapse
I have Clockwork installed and it acts as if it flashes OK but when I reboot or restart its reverted back to clockwork. Thoughts?
cvondra said:
I have Clockwork installed and it acts as if it flashes OK but when I reboot or restart its reverted back to clockwork. Thoughts?
Click to expand...
Click to collapse
Um try READING the op.
I'm a little late to the party, but I've gotten my hands on an YP-G70. I tried installing TWRP on it, but CWM complaints about it being the wrong version. I couldn't see any different versions of it...I've also tried flashing it with Rashr flash tool, but that one also says it's not a valid recovery.
Any hints as to what I can do next?
I have been attempting to install CM12 / Carbon 5.1.1. I have worked my way up from GB to CM 11 / Carbon KK 4.4.4 then I get stuck.
After installing on reboot I get an initial Nutella logo for a few seconds and then the screen goes black (although you can tell it is still backlit) and then nothing. Left it for a couple of hours just in case it required a long install time... nothing. I can get it into this rudimentary recovery fwiw.
So came across this, Is it still mandatory to install TWRP 2.8.0.0? If so could someone kindly upload or add a new link please. Most are to Mega which is now kaput.
I tried installing from Slim 4.4.2 ( Beanstock is also on Mega but it only has TWRP 2.6.5) as suggested somewhere but no go either.
Thanks for breathing life back into my Player 5, I am eager to try Lollipop on it.
Thanks in advance.
How do I install it? I am on stock firmware, do I need a custom firmware first?
tiwas said:
I'm a little late to the party, but I've gotten my hands on an YP-G70. I tried installing TWRP on it, but CWM complaints about it being the wrong version. I couldn't see any different versions of it...I've also tried flashing it with Rashr flash tool, but that one also says it's not a valid recovery.
Any hints as to what I can do next?
Click to expand...
Click to collapse
I'm stuck at the same place. The error msg seems to imply its for the USA version:
"This package is for yp-G70, venturi,venturi_USA" devices. This device is a "herring".

Unofficial TWRP 3.0.x

F2FS Support
Backup/restore
EFS
Firmware
XDA:DevDB Information
Unofficial TWRP 3.0.x, Tool/Utility for the OnePlus One
Contributors
ketut.kumajaya
katinatez
recovery
device
kernel
Version Information
Status: Stable
Current Stable Version: v3.0.2-0
Stable Release Date: 2016-06-10
Created 2014-12-23
Last Updated 2016-01-27
Downloads​
This is flashable through custom recovery, if you prefer fastboot commands extract recovery.img
Code:
adb reboot bootloader
fastboot flash recovery recovery.img
fastboot reboot
Changelog
Code:
[SIZE="4"]
v2.8.7.0.5
Updated
android-6.0 branch
v2.8.6.1
05/18/2015
Encryption
Update F2FS
with Jaegeuk Kim repo
v2.8.6.0.1
04/24/2015
Introduction of
materialised-theme by
ketut.kumajaya new project contributer
v2.8.6.0
03/31/2015
Fixed Sliders on Themes
New Splash screen
v2.8.6.0
03/26/2015
Initial release
v2.8.5.1
02/12/2015
v2.8.4.1
01/25/2015
All fixed
01/24/2015
Update 2.8.4.1
[COLOR="Red"]Bad build[/COLOR]
01/15/2015
Update 2.8.4.0
Fixed screen timeout
01/09/2015
Fixed reboot issues
Updated F2FS
12/22/2014
Fixed Aroma File Manager loading
12/22/2014
Initial Release
twrp 2.8.3.0
[/SIZE]
Still uploading?
I downloaded yesterday an 2.83 version and had problems when flashing roms via otg so i returned to 2.82 . Is this a new 2.83 version ? I think i downloaded it from your afh.
Anyway i will give it a try later.
Thanks for you hard work on this and Temansek
Having lived the life of a flashaholic in just the past weeks, the listed fixes and enhancements in this update are more worth to me than daily sliced bread!
So far no more reboots enabling MTP, copying large nandroid backup files via MTP ( > 1.2GB) onto phone works as well as mounting and file operations on usb sticks via USB-OTG. Also the enhanced/fixed permissions handling will hopefully avoid the manual use of restorecon from now on, will observe.
Haven't yet tried backup to/restore from USB-OTG, but will try eventually.
Thank you @katinatez!
Thanks! It's now available officially!
http://techerrata.com/browse/twrp2/bacon
@katinatez's version has extra features/fixes, need to be aware of that.
What's the "custom theme" included in this build? Did you flash it in recovery or did you extract the img-file and flashed it via fastboot?
fmc000 said:
What's the "custom theme" included in this build? Did you flash it in recovery or did you extract the img-file and flashed it via fastboot?
Click to expand...
Click to collapse
Custom theme is integrated, but you can change it with this others (1080):
http://forum.xda-developers.com/android/themes/theme-twrp-materialised-dark-light-play-t2915584
jcespi2005 said:
Custom theme is integrated, but you can change it with this others (1080):
http://forum.xda-developers.com/android/themes/theme-twrp-materialised-dark-light-play-t2915584
Click to expand...
Click to collapse
So the materialized theme is the one included? I know that you can change themes as you wish, just wanted to know which was the one the OP included in the bundle.
fmc000 said:
So the materialized theme is the one included? I know that you can change themes as you wish, just wanted to know which was the one the OP included in the bundle.
Click to expand...
Click to collapse
It isn't materialized one... but not sure what is, same button structure as default, just minor graphics change...
@katinatez
Excellent work mate! Thx! :good:
Never mind
Love the new look.... Thanks
Happy Merry Christmas to all people of good will. Love and peace to the entire world.
Sent from my 1+1
Just wanted to clarify one thing: I'm using multirom version to do multirom things, can't use this version for multirom right?
Sent From Lollipopified Bacon Goodness!
ek69 said:
Just wanted to clarify one thing: I'm using multirom version to do multirom things, can't use this version for multirom right?
Sent From Lollipopified Bacon Goodness!
Click to expand...
Click to collapse
No, only features are the ones listed.
I serm to have a problem with the timezone. I had to set GMT+2 to have the correct time and I am in Italy, so GMT+1. Never had this problem before.
Did you un/check the DST option?
Update the recovery just now, found a bug. Surprised no one called me out on it. Aroma File Manager would not load. Kinda dejavu all over again with my Philz recovery doing the same. Anyways enough jabbering all fixed now.

[ROM][5.1.1_r10] SlimLP - Togari [BETA 0.5]

SlimRoms is a custom android operating system. The main goal is to offer users a slimmed down but still feature rich alternative to other android operating systems.
The entire SlimTeam work together to bring you this tailor-made beauty straight from Android Open Source Project (AOSP) source code.
All of the sources can be publicly viewed through GitHub and you can stop by the public Gerrit to submit patches of any type.
SlimLP is the project name for SlimRoms based on Android 5.1 Lollipop and offers the following original features:
Slim Dialer
A full replacement of the official Google closed source dialer with added features. - We've got you covered.
Privacy guard
Disable unnecessary permissions set by app developers. - Privacy is part of the experience.
Slim Center
Downloads, contact information, system app removal. - More fun than you can shake a stick at.
System-Wide Keyboard Controls
Rotation, cursor control, optional emoticons..etc. - You'll be tapping away to your heart's content.
Custom Shortcuts WIP
Hardware keys, Navigation Ring, Navigation Bar, Lockscreen, Tiles, Notifications etc. - Customize it the way you like it.
Important links:
slimroms.eu - The official webpage where you find everything you need to know about SlimRoms.
Downloads (Unofficial builds for now) - also download GAPPS
Installation instructions - Follow these steps to the letter if you're about to install SlimRoms on your device.
Latest Changelog - Read here if you want information on changes in latest build.
FAQ - The most frequent asked questions with answers.
Kernel Source - The source of your device's kernel.
Get in touch! - Contact SlimRoms at these places if you have questions, requests or feedback.
Google+
Twitter
Facebook
Xda Forums
Disclaimer: SlimRoms are not responsible for any damages to your device.
XDA:DevDB Information
SlimLP - Togari, ROM for the Sony Xperia Z Ultra
Contributors
OmarEinea, SlimRoms
Source Code: https://github.com/SlimRoms
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader
Version Information
Status: Beta
Current Beta Version: 0.5
Beta Release Date: 2015-08-16
Created 2015-01-26
Last Updated 2015-08-16
Bugs:
- Minor bugs, same as CM, Mainly:
Some issues while enabling Adaptive brightness
Misc stuff:
Old Screenshots or Newer ScreenShots - (from my Z1 Compact)
Bugtracker - to report your bugs
SlimLP kernel contains some nice features like:
Intellidemand Governor
SIO & FIOPS I/Os
Sound Control
MultiROM Support
THE ROM DOESN'T CONTAIN RECOVERY!
Though you can get yourself one by flashing one of these:
Fota TWRP 2.8.x.x recovery for togari
MultiROM TWRP recovery
I don't see the ROM. How to install?
@OmarEinea thank you for all the hard work, you've brought a couple lollipop Roms to our device now and have been keeping them up to date. Great job, much appreciated. How is battery life on this? And is the kernel able to make backups or is it like the cyanogenmod recovery?
theinspector said:
@OmarEinea is the kernel able to make backups or is it like the cyanogenmod recovery?
Click to expand...
Click to collapse
SlimLP has TWRP, so yes.
Yay finally! No what happened to the slimgapps for lollipop?!?
Sent from my Xperia Z Ultra using Tapatalk
---------- Post added at 07:50 PM ---------- Previous post was at 07:49 PM ----------
Whoops nvm should've looked closer!
Sent from my Xperia Z Ultra using Tapatalk
I will try flashing again in a bit, but right now I have slow data on LTE and WiFi which is normally fast. Typical speeds right now are very slow. Recovery doesn't work either. Will edit my post after I flash again
UPDATE: Tried flashing again with the same issues.
Just flashed this ROM and really liking it - very fast will be daily driver for now thanks for the great ROM
Any chance y'all could look into supporting the GPE edition also? Loved slim on my G2 and Galaxy Nexus.
Thanks!
theinspector said:
@OmarEinea thank you for all the hard work, you've brought a couple lollipop Roms to our device now and have been keeping them up to date. Great job, much appreciated. How is battery life on this? And is the kernel able to make backups or is it like the cyanogenmod recovery?
Click to expand...
Click to collapse
theinspector said:
I will try flashing again in a bit, but right now I have slow data on LTE and WiFi which is normally fast. Typical speeds right now are very slow. Recovery doesn't work either. Will edit my post after I flash again
UPDATE: Tried flashing again with the same issues.
Click to expand...
Click to collapse
SlimLP doesn't have recovery yet, you should be able to have recovery through many different ways,
my recommended one is to use MultiROM mode, it's fantastic
ApertureAndroid said:
SlimLP has TWRP, so yes.
Click to expand...
Click to collapse
It's true SlimKat had TWRP, but SlimLP has aosp recovery until now, though TWRP should be included in it soon (I hope )
lexdad86 said:
Any chance y'all could look into supporting the GPE edition also? Loved slim on my G2 and Galaxy Nexus.
Thanks!
Click to expand...
Click to collapse
I'll check and see.
bgpepi said:
I don't see the ROM. How to install?
Click to expand...
Click to collapse
Well just like any other ROM (in addition to flashing SuperSU)
http://slimroms.net/index.php/installation
so just after flashing GAPPS, flash SuperSU and you'll be good to go.
Regards,
Omar.
Tried to use Multirom TWRP to F2FS format and clean install but it doesnt work. So convert back to ext4 and clean installed. Worked well but couldn't recognise my 64GB card which is exFaT formatted. So going to convert to FAT32 before trying again.
Works fast and furious. So will be using as daily for now.
Thank you Omar... you and the rest of the devs have been fast and furious getting LP roms out for us.
How to enter the recovery? I just can't manage how to do that.
Jecmenn said:
How to enter the recovery? I just can't manage how to do that.
Click to expand...
Click to collapse
Hi and i had the problem with recovery for me the most easy way is to enter dual recovery with flashtool and 108_DualRec_Jackie099.img kernel and simply Hot boot the kernel .Its not permanent recovery everytime you need you have to use flashtool and the hot boot kernel.I can make a video if you want.
really fast and extremely easy to set up.
this runs smoother and faster than the GPE port.
face smart-lock is extremely useful!
Viper4Android works ? Thx BTW.
Jecmenn said:
How to enter the recovery? I just can't manage how to do that.
Click to expand...
Click to collapse
veskostoev said:
Hi and i had the problem with recovery for me the most easy way is to enter dual recovery with flashtool and 108_DualRec_Jackie099.img kernel and simply Hot boot the kernel .Its not permanent recovery everytime you need you have to use flashtool and the hot boot kernel.I can make a video if you want.
Click to expand...
Click to collapse
SlimLP doesn't have recovery yet, so I recommend you to install the TWRP recovery from MultiROM through fastboot in /recovery partition,
or use the whole MultiROM mode as it's brilliant and very useful
this way you'll have recovery out side of the ROM and you'll be able to update and do everything without losing the recovery.
Regards,
Omar.
OmarEinea said:
SlimLP doesn't have recovery yet, so I recommend you to install the TWRP recovery from MultiROM through fastboot in /recovery partition,
or use the whole MultiROM mode as it's brilliant and very useful
this way you'll have recovery out side of the ROM and you'll be able to update and do everything without losing the recovery.
Regards,
Omar.
Click to expand...
Click to collapse
Thank you! MultiROM is actually very cool and solved my problem.
Omar,
Would you have any idea why formatting data and cache to f2fs would cause the ROM to boot endlessly after the kernel boot up?
Meaning the booting continues at the SlimLP boot animation for a long time. I tried doing it by converting to f2fs after a clean install with both data and cache as ext4 initially and also formatting to f2fs before doing a clean install. Both just gets stuck at the booting animation. It just keeps running
I am also running this rom with multirom and it is great, with more features be added later like dark slim, etc. ?
Also the battery life is quite good as well, getting about 5 hours sot all lte no wifi with location on and syncing 5 email accounts
hello,
after installation I have no access to the sd card. not possible with titanium backup restore apps.

[Recovery][G901F] Official Team Win Recovery Project for Galaxy S5 Plus (3.0.2-0)

Team Win Recovery Project 3.0.2-0
WHAT IS TWRP?
Oh come on, you know what it is - don't try to fool me!
In case you're serious, though...
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, and root your device.
DOWNLOAD
You can find the device page here:
http://teamw.in/devices/samsunggalaxys5plus.html
There is a download link there, as well as instructions on how to flash it.
I highly recommend using Odin to flash when possible.
You can find a zip containing Odin as well as a link to Samsung's Mobile drivers page here:
https://idlekernel.com/flash-tools/
CHANGES
v3.0.2-0 - See here for the changes.
v3.0.1-0 - See here for changes!
FEATURES
MTP support
USB Mass Storage support
Micro SDcard and USB OTG storage support
f2fs file system support (read, write, format, backup & restore)
exFAT file system support (read, write, format, backup & restore)
NTFS file system support (read, write, format)
Backup & restore of modem/baseband/firmware (not bootloader!)
ADB root
Full SELinux support
Built in android 6.0 tree
KNOWN ISSUES
Samsung encryption is not supported
CONTACT & SUPPORT
You can find us on IRC at #twrp on chat.freenode.net.
You can also post in this thread and I will attempt to answer any questions you may have.
SOURCE CODE
TWRP: https://github.com/omnirom/android_bootable_recovery (android-6.0)
Device tree: https://github.com/TeamWin/android_device_samsung_kccat6 (android-6.0)
Kernel: https://github.com/jcadduono/nethunter_kernel_kccat6 (twrp-6.0)
CONTRIBUTIONS
Gerrit for TWRP: http://gerrit.omnirom.org/
Gerrit for officially supported devices: http://gerrit.twrp.me/
XDA:DevDB Information
Team Win Recovery Project - Galaxy S5 Plus, Tool/Utility for the Samsung Galaxy S 5
Contributors
jcadduono, the Team Win Recovery Project team
Version Information
Status: Stable
Current Stable Version: 3.0.2-0
Stable Release Date: 2016-04-05
Created 2016-04-02
Last Updated 2016-07-11
I'm unsure why but this thread doesn't show up in the forums.
For me TWRP working perfect.
Thank you very much @jcadduono
jcadduono said:
You can find the device page here:
http://teamw.in/devices/samsunggalaxys5plus.html
Click to expand...
Click to collapse
404 - Page not found
jcadduono said:
Temporary: Please let me know if 3.1.0-0-test1 @ http://idlekernel.com/twrp/kccat6/testing is working for you!
Click to expand...
Click to collapse
Seems to be working well. Backup, Restore, Install from zip, Mount, Settings all worked flawlessly for me. Only concern: CPU temp rose to about 80C during backup, with a spike of 95C.
aelfinn said:
Seems to be working well. Backup, Restore, Install from zip, Mount, Settings all worked flawlessly for me. Only concern: CPU temp rose to about 80C during backup, with a spike of 95C.
Click to expand...
Click to collapse
did you actually feel the heat (that intense) or did it just say that on the screen?
its possible the temperate may be being misread
official build is up now
jcadduono said:
did you actually feel the heat (that intense) or did it just say that on the screen?
its possible the temperate may be being misread
official build is up now
Click to expand...
Click to collapse
it is felt, simply touch the screen to feel it. the display go haywire at that temperature. and the phone is very hot.
jcadduono said:
did you actually feel the heat (that intense) or did it just say that on the screen?
Click to expand...
Click to collapse
The phone got quite hot, but not worryingly so.
---------- Post added at 12:30 AM ---------- Previous post was at 12:27 AM ----------
jcadduono said:
Team Win Recovery Project 3.0.1-0
Click to expand...
Click to collapse
The thread title still says “3.1.0-0”, btw.
aelfinn said:
The phone got quite hot, but not worryingly so.
---------- Post added at 12:30 AM ---------- Previous post was at 12:27 AM ----------
The thread title still says “3.1.0-0”, btw.
Click to expand...
Click to collapse
fixed the version in title, the arial black thing is actually a bug with xda forums that they introduced a few days ago I think
I can't see our device in the device list of TWRP Manager. Is not all official builds available through the app?
I can't thank you enough for your hard work!
daeymon said:
I can't see our device in the device list of TWRP Manager. Is not all official builds available through the app?
Click to expand...
Click to collapse
Same here.
And I'm probably missing something, but .img files are not flashable through Odin...
Néocray said:
Same here.
And I'm probably missing something, but .img files are not flashable through Odin...
Click to expand...
Click to collapse
I got an answer on that separately. The app isn't actually officially supported by the TWRP team. The app maintaner has to add new models/builds to the list. Once I found out it was unofficial I just carried on using Flashify, which offers similar, except its list includes our device.
As for the img file thing, you are correct. You either need to convert it (which I did try, and didn't succeed at) or use something like Flashify to flash the img file.
My g901f is encrypted with TWRP 3 in recovery. I can't change kernel. Can't TWRP support encryption?
Sent from my SM-G901F using XDA-Developers mobile app
ok installed via flashify, thanks to the poster who posted this, twrp shame on them for not fixing their documentation.
Now the issue is its still buggy like theunofficial builds.
1 - brightness setting doesnt work
2 - vibrate doesnt work
3 - if dont touch screen for 5 seconds it then freezes for 30 seconds before responds again
4 - device reboots during backup
chrcol said:
official support already removed?
download links only have odin files so I grabbed the app, kccat6 isnt listed.
Click to expand...
Click to collapse
See the official TWRP page.
I managed to do backups now, so at least it functions now. Will keep this over philz since CM/philz is dead.
and yes I did read the offiical page, it has incorrect info, as it says to use the app which wont work, I used flashify. They need to edit that page to tell people to use flashify and warn some features dont work, thats all.
sorry guys, having trouble keeping track of all my threads. updated the thread and building tars soon.
chrcol said:
ok installed via flashify, thanks to the poster who posted this, twrp shame on them for not fixing their documentation.
Now the issue is its still buggy like theunofficial builds.
1 - brightness setting doesnt work
2 - vibrate doesnt work
3 - if dont touch screen for 5 seconds it then freezes for 30 seconds before responds again
4 - device reboots during backup
Click to expand...
Click to collapse
i don't own this device myself, if you have those issues then come to #twrp on freenode irc and we can work on making test builds to fix those issues.
the tester had told us that everything was working fine.
jcadduono said:
sorry guys, having trouble keeping track of all my threads. updated the thread and building tars soon.
i don't own this device myself, if you have those issues then come to #twrp on freenode irc and we can work on making test builds to fix those issues.
the tester had told us that everything was working fine.
Click to expand...
Click to collapse
OK will be there later this week but number 4 is OK now it is stable for backups now
Thanks
Sent from my SM-G901F using XDA Free mobile app
Can some folks please try this: https://idlekernel.com/twrp/kccat6/twrp-3.0.2-1-b4-kccat6.tar.md5
I've updated f2fs drivers, now using CPE1 kernel sources from Marshmallow.
I've added more partitions to EFS backup, and fixed any possible issues that might be happening during modem/firmware backups.
I also added CM13 hardware qcom encryption support.
And fixed the brightness adjustment hopefully...
Of course I still need someone to report back and let me know if these are actually *fixed*.
I'm still going in blind as it's not a device I own.
Here are the complete changes: https://github.com/jcadduono/androi...mmit/dc77b5ca4fde9148211515d7600776b1b27da1ca
Please also let me know if there are other issues I don't know about!

[RECOVERY][3.2.3-4][beryllium]Unofficial TWRP recovery for Xiaomi PocoPhone F1

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Features:
- Decrypt works
- Mtp works
- Adb works
- Notch theme included ( https://goo.gl/zh9ATT )
Download:
TWRP 3.2.3-4 Unofficial by mauronofrio
TWRP 3.2.3-1 Unofficial by mauronofrio
Source code:
https://github.com/omnirom/android_bootable_recovery
https://github.com/mauronofrio/android_device_xiaomi_beryllium
Donations:
Credits:
@notsyncing
@kimbo_985 for the testing
Created 2019-01-31
Thanks Mate!
May i know what's the difference between this version of twrp and the one which Vasishath has made?
jackgerald said:
Thanks Mate!
May i know what's the difference between this version of twrp and the one which Vasishath has made?
Click to expand...
Click to collapse
Sorry but i don't know the others twrps, i made one for xiaomi mi 8 and i ported also it on pocophone
jackgerald said:
Thanks Mate!
May i know what's the difference between this version of twrp and the one which Vasishath has made?
Click to expand...
Click to collapse
This one says decryption works. Others don't have it working so far.
Aroma installer works?? @mauronofrio
ayush.gl said:
Aroma installer works?? @mauronofrio
Click to expand...
Click to collapse
The aroma installer is not updated from 2015, to make it works is needed something by twrp and something by aroma team. Actually there is a mod can i try but it's needed a different aroma.version
mauronofrio said:
The aroma installer is not updated from 2015, to make it works is needed something by twrp and something by aroma team. Actually there is a mod can i try but it's needed a different aroma.version
Click to expand...
Click to collapse
I would love if you make aroma working. Testing this one right now. Thanks alot for your work.
Thanks bro for the Unofficial TWRP, but where is notch theme (included) ?
Sent from my Xiaomi Poco F1 using XDA Labs
hello working backup restore? very thanks
regards
d3athwarrior said:
This one says decryption works. Others don't have it working so far.
Click to expand...
Click to collapse
I think you're wrong there
My phone is encrypted. I use Vasishath's twrp and can browse/modify the filesystem when in twrp.
There is a 15seconds touch freeze. Other than that i don't find any bugs. Thanks mate.
mauronofrio said:
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Features:
- Decrypt works
- Mtp works
- Adb works
- Notch theme included ( https://goo.gl/zh9ATT )
Download:
TWRP 3.2.3-0 Unofficial by mauronofrio
Source code:
https://github.com/omnirom/android_bootable_recovery
https://github.com/mauronofrio/android_device_xiaomi_beryllium
Donations:
Credits:
@notsyncing
@kimbo_985 for the testing
Created 2019-01-31
Click to expand...
Click to collapse
Any plan to update with multirom support??
omarhasan96 said:
Any plan to update with multirom support??
Click to expand...
Click to collapse
There is already twrp multirom ...in multirom thread
Antidote03 said:
There is already twrp multirom ...in multirom thread
Click to expand...
Click to collapse
It doesnt support mtp and some other stuff
Is MIUI OTA update working?
Sometimes twrp freezes after any zip install ( gapps ). locking and unlocking fixes it though
SD card works on this recovery?
anthraxisabeast said:
SD card works on this recovery?
Click to expand...
Click to collapse
Yes it is working
ps_minky16 said:
Sometimes twrp freezes after any zip install ( gapps ). locking and unlocking fixes it though
Click to expand...
Click to collapse
MMM i need of more checks for this bug
edd_boy said:
Is MIUI OTA update working?
Click to expand...
Click to collapse
Not tested, you can try
d3athwarrior said:
This one says decryption works. Others don't have it working so far.
Click to expand...
Click to collapse
Lol! Did you even try the TWRP made by Vasishath? That twrp decrypts your device every time you boot into it. I have been using that TWRP since the beginning and never had to flash the DFE crap.
Rowdyy Ronnie said:
Lol! Did you even try the TWRP made by Vasishath? That twrp decrypts your device every time you boot into it. I have been using that TWRP since the beginning and never had to flash the DFE crap.
Click to expand...
Click to collapse
:good:
https://forum.xda-developers.com/showpost.php?p=78801149&postcount=10

Categories

Resources