[ROM+Kernel] [5.1.1] [UBER-4.9/5.1] UBERCM for G3 [D855]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
First of all:
This is my ROM version of CM12.1 completly compiled with UBER-4.9 Toolchain for ROM and UBER-5.1 Toolchain for Kernel.
My FechdaKernel is integrated in this ROM with all the features except Multirom Support.
It's made for the best performance on our device and it's really really fast and smooth. For battery, before you complain,
it's still acceptable but not as good as Stock CM. But you come easily over the day
Features:
ROM:
- -ofast optimized
- compiled with latest UBER-4.9 toolchain
- added a lot of GCC flags
- Floop Nest optimized
Kernel:
IO Schedulers:
-CFQ
-DEADLINE
-FIFO
-FIOPS
-NOOP
-ROW (default)
-SIO
-TRIPNDROID
-VR
-ZEN
Governors:
-Interactive
-Conservative
-Ondemand
-Powersave
-Performance
-Wheatley
-SmartassV2
-Smartmax
-IntelliMM
-Pegasusq
-Slim
-Lionheart
-Nightmare
-Hyper
-ZZMoove
ZZMoove Profiles
1. for Default (set governor defaults)
2. for Yank Battery -> old untouched setting (a very good battery/performance balanced setting DEV-NOTE: highly recommended!)
3. for Yank Battery Extreme -> old untouched setting (like yank battery but focus on battery saving)
4. for ZaneZam Battery -> old untouched setting (a more 'harsh' setting strictly focused on battery saving DEV-NOTE: might give some lags!)
5. for ZaneZam Battery Plus -> NEW! reworked 'faster' battery setting (DEV-NOTE: recommended too! )
6. for ZaneZam Optimized -> old untouched setting (balanced setting with no focus in any direction DEV-NOTE: relict from back in the days, even though some people still like it!)
7. for ZaneZam Moderate -> NEW! setting based on 'zzopt' which has mainly (but not strictly only!) 2 cores online
8. for ZaneZam Performance -> old untouched setting (all you can get from zzmoove in terms of performance but still has the fast down scaling/hotplugging behaving)
9. for ZaneZam InZane -> NEW! based on performance with new auto fast scaling active. a new experience!
10. for ZaneZam Gaming -> NEW! based on performance with new scaling block enabled to avoid cpu overheating during gameplay
More Information: http://forum.xda-developers.com/galaxy-s3/development/info-cpu-governor-zzmoove-t2326544
TCP Congestion Algorithms:
-Cubic (default)
-Reno
Compiled with Toolchain UBER 5.1
-Ofast Optimized
Voltage Control Support
Intelliplug
Simple_ondemand GPU Governor Fixed
simple_gpu_algorithm GPU Governor
GPU Optimization Flags
F2FS Support
KSM Support
LCD Notifier Patch - Powersaving when used ZZMoove Govenor
Slightly CPU OC from 2,46Ghz to 2,53Ghz
Sweep2sleep
Sound Control
GPU: OC to 657MHz, Idle on 27MHz and add 100MHz Step
Dynamic Read-Ahead Filesystem
Powersuspend
Adreno Idler
How to Install:
1. Install TWRP: http://forum.xda-developers.com/lg-...mp-unlock-lg-g3-twrp-d852-d852g-f400-t2900614
2. Download Rom and Gapps(In download section)
3. Copy them to your Phone
4. Reboot to recovery
5. Make a backup
6. Wipe data/factory reset
7. Flash the ROM and then Gapps
9. Enjoy.
Download:ROM: https://www.androidfilehost.com/?fid=24052804347763748
Gapps: https://www.androidfilehost.com/?fid=24052804347761335
I try to provide weekly updates with latest CM changes.
IMPORTANT: Don't do OTA updates, because then you go back to official CM without my kernel and optimizations!!
________________________________________________
Donations:
If you like my work you can donate here
Credits:@Cl3Kener for UBER-Toolchains and for build optimizations on Optipop
@cyanogenmod team for Rom
and all the credits which are given in the kernel thread : http://forum.xda-developers.com/lg-g3/development/kernel-fechdakernel-t3126745
Source:
https://github.com/cyanogenmod/
https://github.com/Fechinator/FechdaKernel
No, it's not Uber CM from @RobbieL811 , i talked to him and it's okay to call it this way. (There was no better name on my mind)
PS: Give me a thanks if i helped you or you like it.... THANKS!
XDA:DevDB Information
UBERCM for G3, ROM for the LG G3
Contributors
Fechinator
ROM OS Version: 5.1.x Lollipop
Version Information
Status: Stable
Created 2015-06-18
Last Updated 2015-06-23
Some informations:
You can boost the speed and performance even more with using "Lionheart" or "Pegasusq" Governor.
If you want it balanced use "Interactive" Governor.
If you like to save more battery use "IntelliMM" or "ZZMoove" Governor with a battery saving profile.
If you change Kernel settings and get a problem PLEASE post it in the Kernel thread and say what you have changed!
What does -ofast mean?: -> https://gcc.gnu.org/onlinedocs/gcc/Optimize-Options.html
What are UBER Toolchains?: -> https://plus.google.com/+ChetKener/posts/YzMJEkzPQgp
and new rom gratzz Fechinator
Been patiently waiting for this Fechinator, great work!
Sent from my LG-D855 using XDA Premium 4 mobile app
no plans for kcal?
some pics and specs from rom if you have free time to the feature
I tried this ROM with pegasusq governor, battery usage - 1% per 1 minute screen on.
askarv said:
I tried this ROM with pegasusq governor, battery usage - 1% per 1 minute screen on.
Click to expand...
Click to collapse
Pegasusq and lionheart drain the most battery, try intellimm
So sorry,
but I tried your rom. It works fine and quick.
Except I noticed when listening to my new headset, there is no atpx codec for bluetooth. Stupid of me not to think of that. So that being important to me, with my new headset, I wanted to change back to stock rom. I wanted to use the app quickboot to boot in recovery, but that didn't work. Root checker gave me that root acces is not properly installed on this device! I assumed of course this rom was pre rooted or something
So what are my options.
I can still, having enabled developer options, boot in twrp recovery. But can I just do a restore of the backup of the stock rom I made or do I need root access for that to work fine. I'm just asking since I don't want to brick my device.
Is there a way to root this rom. I used one click root for my previous stock lollipop rom.
thank you anyway
Plassterk said:
So sorry,
but I tried your rom. It works fine and quick.
Except I noticed when listening to my new headset, there is no atpx codec for bluetooth. Stupid of me not to think of that. So that being important to me, with my new headset, I wanted to change back to stock rom. I wanted to use the app quickboot to boot in recovery, but that didn't work. Root checker gave me that root acces is not properly installed on this device! I assumed of course this rom was pre rooted or something
So what are my options.
I can still, having enabled developer options, boot in twrp recovery. But can I just do a restore of the backup of the stock rom I made or do I need root access for that to work fine. I'm just asking since I don't want to brick my device.
Is there a way to root this rom. I used one click root for my previous stock lollipop rom.
thank you anyway
Click to expand...
Click to collapse
You can enable root in developer settings
Using this rom since yesterday. Only one bug I had faced. Screen becomes black and unresponsive during settings wizard so I had to pull the battery to turn it on.
Loving this rom and unlike other cm based roms double tap to wake is working perfectly fine. Thanks fechinator for this awesome rom
Sent from my LG-D855 using Tapatalk
Battery stats
Sent from my LG-D855 using Tapatalk
Weekly Update 06/23
Merged latest CM changes for ROM
Kernel update to R5:
-added Powersuspend by faux123
-added Adreno Idler (lower power consumption while maintaining high-performance) by arter 97
-added more GPU optimizations
-added readahead optimizations
ROM -> https://www.androidfilehost.com/?fid=24052804347763748
You can dirty flash.
Hi there is no option to change the size of the navigation bar, can you add this feature of possible.
Sent from my LG-D855 using Tapatalk
Anybody notice that the GPS location icon stays in the notification bar even when it is off? I remember having this issue on a previous rom and I believe it was due to the GAPPS. If you aren't experiencing could you let me know which you're using?
All in all, amazing rom!
I've dirty flashed from the previous version to current
Sent from my LG-D855 using XDA Premium 4 mobile app
AshleyNG2 said:
Anybody notice that the GPS location icon stays in the notification bar even when it is off? I remember having this issue on a previous rom and I believe it was due to the GAPPS. If you aren't experiencing could you let me know which you're using?
All in all, amazing rom!
I've dirty flashed from the previous version to current
Sent from my LG-D855 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The GAPPS mentioned in OP
Fechinator said:
The GAPPS mentioned in OP
Click to expand...
Click to collapse
Which is what I've been using, I'm guessing you use your own rom :sly: are you not experiencing this then?
Sent from my LG-D855 using XDA Premium 4 mobile app
AshleyNG2 said:
Which is what I've been using, I'm guessing you use your own rom :sly: are you not experiencing this then?
Sent from my LG-D855 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No for me is everything fine.. Maybe it's another APP causing this problem
ngoralph said:
no plans for kcal?
Click to expand...
Click to collapse
Same here, can't you add kcal? I would make it perfect
Thanks OP
Sent from my LG-D855 using Tapatalk
d3xtr0 said:
Same here, can't you add kcal? I would make it perfect
Thanks OP
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
Already added, wait for kernel update (maybe today )
EDIT: FechdaKernel R6 is online
Related
[ROM+Kernel] [5.1.1] [UBER-4.8/6.0] UBERCM for V500
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
First of all:
This is my ROM version of CM12.1 completly compiled with UBER-4.8 Toolchain for ROM and UBER-6.0 Toolchain for Kernel.
My FechdaKernel is integrated in this ROM.
It's made for the best performance on our device and it's really really fast and smooth. You'll see the difference.
Features:
ROM:
- -ofast optimized
- compiled with latest UBER-4.8 toolchain
- added a lot of GCC flags
- Floop Nest optimized
Kernel:
IO Schedulers:
-CFQ
-DEADLINE
-FIFO
-FIOPS
-NOOP
-ROW (default)
-SIO
-TRIPNDROID
-VR
-ZEN
Governors:
-Interactive
-Ondemand
-Powersave
-Performance
-Userspace
-Wheatley
-SmartassV2
-IntelliMM
-Pegasusq
-Lionheart
-Nightmare
-Hyper
-ZZMoove
ZZMoove Profiles
1. for Default (set governor defaults)
2. for Yank Battery -> old untouched setting (a very good battery/performance balanced setting DEV-NOTE: highly recommended!)
3. for Yank Battery Extreme -> old untouched setting (like yank battery but focus on battery saving)
4. for ZaneZam Battery -> old untouched setting (a more 'harsh' setting strictly focused on battery saving DEV-NOTE: might give some lags!)
5. for ZaneZam Battery Plus -> NEW! reworked 'faster' battery setting (DEV-NOTE: recommended too! )
6. for ZaneZam Optimized -> old untouched setting (balanced setting with no focus in any direction DEV-NOTE: relict from back in the days, even though some people still like it!)
7. for ZaneZam Moderate -> NEW! setting based on 'zzopt' which has mainly (but not strictly only!) 2 cores online
8. for ZaneZam Performance -> old untouched setting (all you can get from zzmoove in terms of performance but still has the fast down scaling/hotplugging behaving)
9. for ZaneZam InZane -> NEW! based on performance with new auto fast scaling active. a new experience!
10. for ZaneZam Gaming -> NEW! based on performance with new scaling block enabled to avoid cpu overheating during gameplay
More Information: http://forum.xda-developers.com/galaxy-s3/development/info-cpu-governor-zzmoove-t2326544
TCP Congestion Algorithms:
-Cubic (default)
-Reno
Compiled with latest UBER 6.0 Toolchain
-Ofast Optimized
Graphite Optimized
Voltage Control Support
GPU Optimization Flags
Dynamic Read-Ahead Filesystem
Touchboost
Multirom Support
KSM Support
LCD Notifier Patch - Powersaving when used ZZMoove Govenor
How to Install:
1. Install TWRP
2. Download Rom and Gapps(In download section)
3. Copy them to your Phone
4. Reboot to recovery
5. Make a backup
6. Wipe data/factory reset
7. Flash the ROM and then Gapps
9. Enjoy.
Download:ROM: https://www.androidfilehost.com/?w=files&flid=34101
Gapps: https://www.androidfilehost.com/?fid=24052804347761335
I try to provide weekly updates with latest CM changes.
IMPORTANT: Don't do OTA updates, because then you go back to official CM without my kernel and optimizations!!
________________________________________________
Donations:
If you like my work you can donate here
Credits:@Cl3Kener for UBER-Toolchains and for build optimizations on Optipop
@cyanogenmod team for Rom
and all the credits which are given in the kernel thread for LG G3 : http://forum.xda-developers.com/lg-g3/development/kernel-fechdakernel-t3126745
@franciscofranco @faux123 @ak @zanezam for kernel stuff
Source:
https://github.com/cyanogenmod/
https://github.com/Fechinator
No, it's not Uber CM from @RobbieL811 , i talked to him and it's okay to call it this way. (There was no better name on my mind)
PS: Give me a thanks if i helped you or you like it.... THANKS!
XDA:DevDB Information
UBERCM for V500, ROM for the LG G Pad 8.3
Contributors
Fechinator
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2015-06-22
Last Updated 2015-06-23
Some informations:
You can boost the speed and performance even more with using "Lionheart" or "Pegasusq" Governor.
If you want it balanced use "Interactive" Governor.
If you like to save more battery use "IntelliMM" Governor.
What does -ofast mean?: -> https://gcc.gnu.org/onlinedocs/gcc/Optimize-Options.html
What are UBER Toolchains?: -> https://plus.google.com/+ChetKener/posts/YzMJEkzPQgp
Found a bug.
@Fechinator Seems promising. Excited to try it out. Will keep you posted about the experience.
Edit: I already found a bug now. It's something with rotation. This is not the normal problem where the 'Auto Rotation' doesn't work at all. In this case the 'Auto Rotation' works but I'm not able to lock the rotation in Landscape mode by disabling the auto rotation, when I do it switches back to Portrait mode. I've attached a video for better understanding. [VIDEO LINK: http://youtu.be/qZ9hd0Rorm0 ]. BTW I did a reboot also. Performance in a short testing is good. But I couldn't test the battery. Hopefully if you can fix the rotation issue mentioned I will stick with this ROM.
Love the kernel, although the base for the ROM you could consider doing too cm by temasek or a very new but good base ROM "OwnROM".
Sent from my LG-D405 using XDA Free mobile app
@Sarun said:
@Fechinator Seems promising. Excited to try it out. Will keep you posted about the experience.
Edit: I already found a bug now. It's something with rotation. This is not the normal problem where the 'Auto Rotation' doesn't work at all. In this case the 'Auto Rotation' works but I'm not able to lock the rotation in Landscape mode by disabling the auto rotation, when I do it switches back to Portrait mode. I've attached a video for better understanding. [VIDEO LINK: http://youtu.be/qZ9hd0Rorm0 ]. BTW I did a reboot also. Performance in a short testing is good. But I couldn't test the battery. Hopefully if you can fix the rotation issue mentioned I will stick with this ROM.
Click to expand...
Click to collapse
Hey, thanks for testing, hm you are right. Too be honest i am not very good at fixing ROM stuff, i am more into kernel development. That's the reason why i took clean CM as a base for my UBERCM Roms, i don't think it's a problem of my work, i think that's a CM bug. Do you have this bug on official CM, too?
Disrupthor said:
Love the kernel, although the base for the ROM you could consider doing too cm by temasek or a very new but good base ROM "OwnROM".
Sent from my LG-D405 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks. Switching to Temasek shouldn't be a problem, but at first i want to optimize it as good as possible. Maybe in the future.
Fair enough, :thumbup: mind me asking but would you add more tcp congestion sets? Westwood for example.
Sent from my LG-D405 using XDA Free mobile app
Fechinator said:
Hey, thanks for testing, hm you are right. Too be honest i am not very good at fixing ROM stuff, i am more into kernel development. That's the reason why i took clean CM as a base for my UBERCM Roms, i don't think it's a problem of my work, i think that's a CM bug. Do you have this bug on official CM, too?
Click to expand...
Click to collapse
I asked some guys most of them are not having this issue. Also CM based have this issue for some devices. But not in AOSP available for V500. Glad if somebody can help.
Update
-merged latest CM changes
-added ZZMoove Governor ( you can set profiles with kernel adiutor in governor settings)
ZZMoove Profiles
1. for Default (set governor defaults)
2. for Yank Battery -> old untouched setting (a very good battery/performance balanced setting DEV-NOTE: highly recommended!)
3. for Yank Battery Extreme -> old untouched setting (like yank battery but focus on battery saving)
4. for ZaneZam Battery -> old untouched setting (a more 'harsh' setting strictly focused on battery saving DEV-NOTE: might give some lags!)
5. for ZaneZam Battery Plus -> NEW! reworked 'faster' battery setting (DEV-NOTE: recommended too! )
6. for ZaneZam Optimized -> old untouched setting (balanced setting with no focus in any direction DEV-NOTE: relict from back in the days, even though some people still like it!)
7. for ZaneZam Moderate -> NEW! setting based on 'zzopt' which has mainly (but not strictly only!) 2 cores online
8. for ZaneZam Performance -> old untouched setting (all you can get from zzmoove in terms of performance but still has the fast down scaling/hotplugging behaving)
9. for ZaneZam InZane -> NEW! based on performance with new auto fast scaling active. a new experience!
10. for ZaneZam Gaming -> NEW! based on performance with new scaling block enabled to avoid cpu overheating during gameplay
More Information: http://forum.xda-developers.com/galaxy-s3/development/info-cpu-governor-zzmoove-t2326544
- added Multirom support
- added KSM support
- added LCD Notifier
ROM -> https://www.androidfilehost.com/?fid=24052804347763972
Any chance of getting the kernel separate from the ROM?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
is proud to present BarePapA's
NavelA - Kernel
Install insructions:
This should work on any ZVA Stock based ROM. Just flash in recovery
Engine95's Changelog:
V1.6 zzmoove gov added - Version 1.0 beta7a (bugfix) - how to change profiles are in post #2.
V1.5
Frandom updated/reworked
Alucard Hotplug
New/reworked govs - Alucard, Dancedance, Adaptive, Tripndroid, IntelliActive, Intellidemand5.5
A couple optimizations - holyangel
V1.4-MB
No OC/UC - but everything else
For those that can't flash any of the others
V1.4
Compiled with UberTC 4.9.3
reworked OC/UC to 2880Mhz
Some optimizations
Intellithermal V2 added
V1.1- V1.3 changes got lost somehow. Sorry
V1
Selinux set to "Permissive"
Added shedulers-CFQ, FIFO, FIOPS,VR,ZEN, TRIPNDROID,SIO
Added governors - INTELLIDEMAND, LIONHEART, SMARTMAX, ONDEMANDPLUS
Faux sound control
Faux Power Suspend
Fast Charge
simple ondemand fix and algorithm
undervolting
TCP Congestion Control - Westwood, Vegas, Reno, and others
KCal - savoca
Jcfunk's Changelog:
V1.6-JCFunkMODv2
GCC 5 -O3 optimized
Alucard_hot_plug disabled, won't compile in GCC 5
Kernel compressed with xz
Compressed Ramdisk with xz
Readahead: Optimize divide/multiply by power of 2 using L/R shift
Engine95's Source
Jcfunk's Source
Downloads: - NavelA
NavelA-V1.6
NavelA-V1.6-MB - No OC/UC, but all the other stuff.
NavelA-V1.5
NavelA-V1.5-MB - No OC/UC, but all the other stuff.
NavelA-V1.4-MB
NavelA-V1.4
NavelA-V1.3
NavelA-V1.2
NavelA-V1.1
NavelA-V1
Downloads for Jcfunk version:
NavelA-V1.6-JCFunkMODv2
XDA:DevDB Information
NavelA Kernel, Kernel for the Sprint LG G3
Contributors
engine95, HPTesla, jcfunk
Source Code: https://github.com/engine95/navelA-990.git
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2015-07-05
Created 2015-07-06
Last Updated 2015-08-20
XDA:DevDB Information
NavelA Kernel, Kernel for the Sprint LG G3
Contributors
engine95, HPTesla, jcfunk
Source Code: https://github.com/engine95/navelA-990.git
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2015-07-05
Created 2015-07-06
Last Updated 2015-09-14
Extras
How to change profiles with Kernel Aduitor
"CPU"
"CPU Governor tunables"
Scoll down to "profile_number, and select the one you want. (The profile name will show right above it).
I would recommend rebooting when done.
zzmoove profiles
* currently available profiles by ZaneZam and Yank555:
-----------------------------------------------------------------------------------------------------
(1)'def' -> Default -> will set governor defaults
-----------------------------------------------------------------------------------------------------
(2)'ybat -> Yank Battery -> a very good battery/performance balanced setting -
DEV-NOTE: highly recommended! -
------------------------------------------------------------------------------------------------
(3)'ybatext'-> Yank Battery Extreme -> like yank battery but focus on battery saving -
-------------------------------------------------------------------------------------------------
(4)'zzbat' -> ZaneZam Battery -> a more 'harsh' setting strictly focused on battery saving -
DEV-NOTE: might give some lags! -
--------------------------------------------------------------------------------------------------
(5)'zzbatp' -> ZaneZam Battery Plus -> NEW! reworked 'faster' battery setting -
DEV-NOTE: recommended too! -
--------------------------------------------------------------------------------------------------
(6)'zzopt' -> ZaneZam Optimized -> balanced setting with no focus in any direction -
DEV-NOTE: relict from back in the days, even though some people still like it! -
------------------------------------------------------------------------------------------------
(7)'zzmod' -> ZaneZam Moderate -> NEW! setting based on 'zzopt' which has mainly (but not strictly only!) 2 cores online -
--------------------------------------------------------------------------------------------------
(8)'zzperf' -> ZaneZam Performance -> all you can get from zzmoove in terms of performance but still has the fast -
down scaling/hotplugging behaving -
------------------------------------------------------------------------------------------------
(9)'zzinz' -> ZaneZam InZane -> NEW! based on performance with new insane scaling active. a new experience! -
--------------------------------------------------------------------------------------------------
(10)'zzgame' -> ZaneZam Gaming -> NEW! based on performance with scaling block enabled to avoid cpu overheating during gameplay -
--------------------------------------------------------------------------------------------------
(11)'zzrelax'-> ZaneZam Relax -> NEW! based on moderate (except hotplug settings) with relaxed sleep settings -
--------------------------------------------------------------------------------------------------
*
* NOTE: be aware when setting tuneables which have a 'should' in comments below that giving
* them 'wrong' values can lead to odd hotplug behaving!
Bumped
Sent from my LGLS990 using XDA Free mobile app
majedalanni said:
Bumped
Sent from my LGLS990 using XDA Free mobile app
Click to expand...
Click to collapse
Of course.
This should hold you guys over for a little bit.
More to come.
engine95 said:
Of course.
This should hold you guys over for a little bit.
More to come.
Click to expand...
Click to collapse
Awesome. Wasn't expecting this so fast! I gotta charge my phone real quick, then I'll try this out. Thanks!
Sent from my Nexus 7 using XDA Free mobile app
Been running for a couple hours.. Great so far!
Just flashed it. No security error. Android is upgrading right now. Good start! Lol thanks!
Sent from my Nexus 7 using XDA Free mobile app
Any settings recommendations for this kernel in Faux?
TekWarren said:
Any settings recommendations for this kernel in Faux?
Click to expand...
Click to collapse
Ymmv. But for me, I still like
Gov-lionheart
Sched-tripndroid - 2048 for both. But try 4096 also.
Power Suspend on- select "userspace"
Undervolted -30 for me - again ymmv.
I've heard of people being able to get better battery by messing with Kcal. Somehow they get it to go dimmer, and yet still bright enough to see when outside. I haven't messed with that yet.
What setting for network??
Lurien said:
What setting for network??
Click to expand...
Click to collapse
I'm still on Cubic, but I've heard Westwood works pretty well for some.
I haven't been on here for some time but back on my G3 so i had to ask, does this include the oversharpening fix?
jxxxr1 said:
I haven't been on here for some time but back on my G3 so i had to ask, does this include the oversharpening fix?
Click to expand...
Click to collapse
Not yet. But with Kernel Auditor, I think you can adjust it somewhat.
V1.1 in the OP - see change log
This is about where I want it I think. But I'm sure I'll mess with it more later.
Did you really build this kernel in VirtualBox? Also, what are your kernel adiuter settings?
Things groovy so far...on BarePapA v2 & NavelA v1.1. Things holdin steady at -36mV undervolting.
What's the deal with sdcard issues? It's been a while and I forgot how I fixed it back in BarePop. I tried flashing the sdcard_fix zip but still having issues. I took a look at the platform.xml and it looks alright. I have a 64gig sdcard and I recall other people had been having issues with those, but I never have. I might just pop it out, reformat it, and see if that doesn't do it.
IamFlynn said:
Did you really build this kernel in VirtualBox? Also, what are your kernel adiuter settings?
Click to expand...
Click to collapse
Yup. I use Windows and Linux and that is the most convenient way. Although, I just installed 1404LTS and it works a lot better than 1204.
Pretty much the same settings as I posted in Navel kernel thread.
cabbieBot said:
Things groovy so far...on BarePapA v2 & NavelA v1.1. Things holdin steady at -36mV undervolting.
What's the deal with sdcard issues? It's been a while and I forgot how I fixed it back in BarePop. I tried flashing the sdcard_fix zip but still having issues. I took a look at the platform.xml and it looks alright. I have a 64gig sdcard and I recall other people had been having issues with those, but I never have. I might just pop it out, reformat it, and see if that doesn't do it.
Click to expand...
Click to collapse
That may need fixing. My card is a 32gig formatted exfat, and it works fine. For the bigger cards, I may need to fix that.
engine95 said:
That may need fixing. My card is a 32gig formatted exfat, and it works fine. For the bigger cards, I may need to fix that.
Click to expand...
Click to collapse
All seems well now, I think, it was just a long process. Copied sdcard contents to computer, did the windows quickformat of the 64gig card to exFAT, popped it back in and copied things back.
The really weird thing is what happened with my TitaniumBackups. I backed up before going from barepop to barepapa, and after flashing over (including full wipe of everything, system/data/internalsd), my whole folder of backups on the sdcard were useless as if they were all corrupted. The files were there but were 0kb and TiBu couldn't do anything with them. Over a USB connection to my computer, I copied a few out and there were the same on Windows. After I took the card out and plugged it directly into the PC and copied the folder over that way, they all seemed fine. After I formatted the sdcard and recopied everything over, TiBu could then restore them. Weird.
cabbieBot said:
All seems well now, I think, it was just a long process. Copied sdcard contents to computer, did the windows quickformat of the 64gig card to exFAT, popped it back in and copied things back.
The really weird thing is what happened with my TitaniumBackups. I backed up before going from barepop to barepapa, and after flashing over (including full wipe of everything, system/data/internalsd), my whole folder of backups on the sdcard were useless as if they were all corrupted. The files were there but were 0kb and TiBu couldn't do anything with them. Over a USB connection to my computer, I copied a few out and there were the same on Windows. After I took the card out and plugged it directly into the PC and copied the folder over that way, they all seemed fine. After I formatted the sdcard and recopied everything over, TiBu could then restore them. Weird.
Click to expand...
Click to collapse
This would have been nice to know earlier! At least if it happens to me again I can fix it now.
When flashing NavelA 1.1 I get a kernel has crashed error.
Ronflex Kernel
for TW Marshmallow
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction:
• I'm a student who always wanted to contribute to the XDA community but I didn't have time. There were also many many great developers on my previous devices (Xperia X10 and Galaxy S3) so I didn't have to do things myself, I just had to flash and enjoy.
But on this phone, there aren't many devs, so I began to build things myself. I'm very proud to release my first project ever on XDA .
• I want this kernel to be built by the community with your suggestions of new features and that we discuss together about what we could add to this project, this is very important for me as I am not a dev, but just a beginner. I will try to answer every question that you may ask but please don't ask for ETA as I'm just a student.
• I ask the others devs to be kind with me as I'm still not very familiar with git.
• I'm not responsible for what could happen to your phone by flashing this kernel.
Features:
• Built with GCC 4.8 for stability
• Built with new Marshmallow sources
• init.d support
• Permissive SELinux status
• New governors (give suggestions if you know good governors and hotplugs !)
• New CPU hotplugs
• New IO schedulers
• Disable CRC for better memory speed
• Adreno Idler
• Undervolting (may be buggy)
• Network speed tweaks
• Powersuspend
• Kccal screen calibration
• Fastcharge
• AnyKernel by Osmosis flashing method
Bugs:
• Android logging
Instructions:
• You must be on Touchwiz, it will not work on CM nor Mokee.
• Use a custom recovery
• Download the kernel and put it on the memory of your phone
• Boot into recovery (Home/Vol +/Power)
• Flash the kernel and wipe dalvik and cache
It will reset your kernel adiutor settings to prevent any problem. If you don't want that, open anykernel.sh in the kernel package and change the line do.KAclean=1 to do.KAclean=0.
Share your setup (this is your part guys !):
Please report your best combinations of ROM/governor/hotplug... with stats if possible and I'll add it here
• @spezl config
Changelog:
• V1-
Initial release
• V1.1-
Fix the name string in kernel version
Disable some gov and hotplugs as they were not working
Disable CPU boost, for hopefully a better battery life
• V2-
Hotplugs are back
Underclock (268) / overclock (2880)
Added kcal support for screen tweaks
Prevent some kernel wakelocks
New io schedulers
Fastcharge
• V2.1-
started from scratch
change toolchain : back to gcc 4.8, it will ensure stability
anykernel flashing method : we don't need to include supersu in the kernel package anymore
init.d support
fixed simple-ondemand gpu gov
oc and uc gpu : 166 mhz to 800 mhz
Download links:
Ronflex Kernel 2.1: http://forum.xda-developers.com/devdb/project/dl/?id=18975
Ronflex Kernel 2: http://forum.xda-developers.com/devdb/project/dl/?id=18676
Ronflex Kernel 1.1: http://forum.xda-developers.com/devdb/project/dl/?id=18534 // Mirror
Ronflex Kernel 1: http://forum.xda-developers.com/devdb/project/dl/?id=18526 // Mirror
Stock kernel : http://www.mediafire.com/download/8jeubsas7oiu37p/Stock.zip (thanks to MEGAX91)
Credits :
• Kykint and MEGAX91 for answering my questions
• Tkkg1994 because I spent many hours on his sources to understand how things worked and to fix compilation errors
• The creators of the hotplugs/governors/TC and the other features
And of course hit thanks if you like my work...
XDA:DevDB Information
Ronflex Kernel, Kernel for the Samsung Galaxy S 5
Contributors
licha26
Source Code: https://github.com/badscimmia/Ronflex-Kernel
Kernel Special Features:
Version Information
Status: Beta
Beta Release Date: 2016-05-20
Created 2016-05-20
Last Updated 2016-06-23
Reserved
Recommendations/tips :
• Use this kernel tweaker : Kernel Adiutor Mod. If settings don't stick at boot, set delay to 20 sec, press Test in settings, close the app, wait the 20 seconds and reboot
• If you don't know where to start with the features, interactive + zen decision will give you decent battery life, good overall speed and no heating.
• If you use zzmoove, disable cpu hotplug as it is already built in the governor. To change the profiles of zzmoove, go to tunables, profile number and choose the one that you want. Here's the reference
Ronflex profile :
I managed to create an awesome profile to have both performance (ultra smooth experience) and awesome battery life (1hr screen on + wifi of social networking and surfing = 10%, see the screenshot). Here are the broad lines of the settings:
• The key of this profile is this very interesting xda thread : you can mode the interactive governor to do exactly what you want it to do (especially which frequencies it should use). I applied the settings calculated for our lovely G901F on yankactive governor which is known to be power efficient.
• The hotplug is bricked hotplug, a very efficient hotplug for both performance and battery life
• No overclock, only underclock to 268 mhz
• msm-adreno-tz gpu governor at 240-500 mhz + adreno idler, I don't play games a lot but for instance Alto's adventure is working great with this set up
• No undervolt
• Kccal screen calibration new settings to reduce brightness of the screen. With stock settings, the screen was in my opinion too bright, especially inside and in the dark.
How to apply Ronflex profile ?
• Download RonflexProfile.zip
• Unzip it
• Replace profiles.json with the one you found in my zip in data/data/com.kerneladiutor.mod/files (don't set permissions or the profile will not display !!!)
• In kernel adiutor mod, go to profile, click on RonflexProfile and apply !
hey great work on this kernel !!! if possible could you add more io schedulers in the next release? preferable sio. thank you for your hard work !!
Nice might try this maybe add cpu/gpu overclocking? nice to see 901f kernels.
Sent from my SM-G901F using Tapatalk
XPERIAAplooper said:
hey great work on this kernel !!! if possible could you add more io schedulers in the next release? preferable sio. thank you for your hard work !!
Click to expand...
Click to collapse
cloudx720 said:
Nice might try this maybe add cpu/gpu overclocking? nice to see 901f kernels.
Sent from my SM-G901F using Tapatalk
Click to expand...
Click to collapse
Hi
I take in consideration your demands . However I still don't know when I'll release next version as my week of exams begins tomorrow. Stay tuned
Would it be possible for anybody to post stock kernel zip for Reflash in case I want to go back to it?
Sent from my SM-G901F using XDA-Developers mobile app
spezl said:
Would it be possible for anybody to post stock kernel zip for Reflash in case I want to go back to it?
Sent from my SM-G901F using XDA-Developers mobile app
Click to expand...
Click to collapse
Hi, I'd advise you to use TWRP and backup your boot partition. If you need to get back to stock kernel, just restore
But if you really need a flashable stock kernel zip, I'll make one
licha26 said:
Hi
I take into consideration your demands . However I still don't know when I'll release next version as my week of exams begins tomorrow. Stay tuned
Click to expand...
Click to collapse
hehe thanks. good luck for your exams
licha26 said:
Hi
I take into consideration your demands . However I still don't know when I'll release next version as my week of exams begins tomorrow. Stay tuned
Click to expand...
Click to collapse
Good luck, CRACK!!!
[emoji310][emoji310]
Good luck man.
Waiting for a flashable stock kernel
sent from my Nokia 3210 using xda-Developers mobile app
@Android2003
use this one :
http://uploadboy.me/1dz4xttx86vc/Stock.zip.html
I'm currently testing V2! Expect a release soon
V2 is online, find the links in OP : what's new ?
- hotplugs are back
- underclock (268) / overclock (2880)
- added kcal support for screen tweaks
- prevent some kernel wakelocks
- new io schedulers
- fastcharge
I'll publish my kernel adiutor profile soon, I still need to make some optimizations but I must say that it is very promising ! (around 45 min for 10% consumption when screen is on on wifi)
Francais, et en plus de ca Lyonnais ! GG Frero.
Wait for your kernel profile , so good for 45 minutes. Thanks Man !
Testing v2.
Thanks CRACK!!!
licha26 said:
V2 is online, find the links in OP : what's new ?
- hotplugs are back
- underclock (268) / overclock (2880)
- added kcal support for screen tweaks
- prevent some kernel wakelocks
- new io schedulers
- fastcharge
I'll publish my kernel adiutor profile soon, I still need to make some optimizations but I must say that it is very promising ! (around 45 min for 10% consumption when screen is on on wifi)
Click to expand...
Click to collapse
In OP u say, use kernel adiutor mod.
This version of the app is very buggy for me.
Stock app is working good.
Anyone with the same problem?
sent from my Nokia 3210 using xda-Developers mobile app
Delete
I get bootloop when I flash this kernel..
Runs great with zzmove batteryplus, OC 2880/UC 268, UV-10, cfq with 512kb int./1024kb ext. read ahead and msm adreno tz with idler enabled and tuned to be less aggressive.
Testing SOT now...
Thanks a lot @licha26!
...btw: anybody able to enable simple_ondemand governor for GPU without sudden reboot?
Sent from my SM-G901F using XDA-Developers mobile app
In all day I dont had any issue, reboot, etc...
The battery life is very good.
Great work!!!
[emoji106][emoji106]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
DISCLAIMER!!
I am not responsible in any way for anything that can be happen to your device when you flashing my kernels.You do so at your own risk!
If you get bootloop click here
Summary CrazySuperKernel is a powerfull kernel with a lot super features!
Features
- CPF7 ramdisk
- Built from Samsung Marshmallow Kernel Source Update CPF7 for G900F
- OTA Updates from Kernel Adiutor app
- Anykernel2 zip For maximum compatibility with all ROMs, CrazySuperKernel uses your existing ramdisk (Do NOT flash this over other custom kernels!You should only flash CrazySuperKernel over the kernel that came with your ROM!!)
- Synapse Support - Complete Kernel Control!! (need download the app from Play Store)
- Compiled with UBERTC 4.9 [latest update]
- init.d support
- insecure kernel (adb has root privileges)
- Faux sound control
- Frandom support
- CPU governors : interactive, impulse, ondemand, smartmax, zzmoove, intellimm,ondemandplus,pegasusq,nightmare,conserva tive,lionheart,powersave,userspace,yankactive,smar tmax_eps,optimax,slim,uberdemand,intellidemand,int elliactive,abyssplugv2,abyssplug,dancedance,tripan droid,hyper,darkness,lazy
- IO schedulers :bfq-tripndroid-cfq-noop-deadline-fiops-row-sio-zen-vr-fifo
- TCP congestion controls: cubic-bic-westwood-htcp-highspeed-hybla-reno-bic-hybla-vegas-lp-yeah-illinois-scalable
- Gpu governors :msm-adreno-tz, conservative,simple_ondemand,powersave,performance ,userspace,cpubw_hwmon,msm_cpufreq
- Kcal v2 with inverted colours
- Intelli thermal v2
- Intelli plug hotplug
- MSM-Sleeper Hotplug
- MSM-Zen Hotplug
- Bricked Hotplug
- Alucard Hotplug
- AutoSMP Hotplug
- Adreno idler
- Fast charge support (by yank555)
- LED extended control (by yank555)
- Prevent wakelock when ambiend display disabled(misc control tab)
- Wake And Sleep Functions
- CPU Voltage Control
- Slimbus overclock
- UKSM
- Enabled Arch Power
- CRC Check Disabled
- Gentle Fair Sleepers (Disabled by default)
- Android Logging switcher
- Enabled All Suspend and Idle Modes
- Power Suspend Mode/State
- Dynamic filesystem read-ahead
- QuickWakeUP
- Dynamic FSync 2.0
- A lot improvments
- A lot fixes
Download Link [AnyKernel] [V4]:https://www.androidfilehost.com/?fid=457095661767116059
Download Link [V3]:https://www.androidfilehost.com/?fid=24591000424948754 Only AnyKernel version is updated!
Download Link UKM/Synapse support here:Crazy-UKM V4.0
Download Link UKM Unistaller here:https://www.androidfilehost.com/?fid=24591000424940110
If you like my work, donations are always welcome.
Don't forget to hit thanks, it's free
Installation guide
Do NOT flash this over other custom kernels!
You should only flash CrazySuperKernel over the kernel that came with your ROM!!
- Download Kernel from this thread
- Flash it with Recovery
[Wipe cache and Dalvik cache recommended]
- Then Reboot
Enjoy the CrazySuperKernel !!!!
Credits
- Thx the devs where created the features where included in kernel
- Thx CrazyGamerGR yeh me
XDA:DevDB Information
CrazySuperKernel, Kernel for the Samsung Galaxy S 5
Contributors
CrazyGamerGR
Source Code: [url]https://github.com/CrazyGamerGR/CrazySuperKernel-TW-MM-KLTE-REBASE[/URL]
Source code Crazy-UKM: [url]https://github.com/CrazyGamerGR/CrazySuperKernel_UKM[/URL]
Kernel Special Features: check the feature list
Version Information
Status: Testing
Current Stable Version: Weekly
Stable Release Date: 2016-06-02
Current Beta Version: Daily
Beta Release Date: 2016-06-01
Created 2016-06-01
Last Updated 2016-06-02
FAQ
Recommended apps : Synapse Support - Complete Kernel Control (need download the app from Play Store) & Kernel Adiutor (with kernel ota updates!) + Kernel Adiutor mod with much more features builded from source by TioCareca (Download Link: https://mega.nz/#!1ZVDQIgL!bHBvHC9AYMCDM4h7w50rjGzFnsiZfxtYUPOw5gbvecM)
changelogs
v1/01-06-16
- initial release
v2/02-06-16
- ota updates from KernelAdiutor app
- added intelli thermal v2
- added dynamic filesystem read-ahead
- added bfq sched
- enabled tripndroid sched
v3/21-07-16
- rebase CPF7 update
- clean up
- many fixes
- anykernel2 update (work with any variant)
- normal zip (boot with a few variants only)
v4/17-11-17
-anykernel update
-init.d support
-insecure kernel (adb has root privileges)
If you get bootloop or bootloop before samsung screen press volume up+down+power button until device vibrate and fast press power+volume up and device will be boot in recovery,instal your rom(dirty instal not need clean instal) and everything will be good^^.
If u use zzmove governor disable all the hotplugs coz it use its own hotplug as anyone knows.
Zzmove profiles
1 ) Default -> will set governor defaults -
2 )ybat -> Yank Battery -> a very good battery/performance balanced setting - DEV-NOTE: highly recommended! -
3 )ybatext-> Yank Battery Extreme -> like yank battery but focus on battery saving -
4 )zzbat-> ZaneZam Battery -> a more 'harsh' setting strictly focused on battery saving -
- DEV-NOTE: might give some lags! -
5 )zzbatp -> ZaneZam Battery Plus -> NEW! reworked faster battery setting -
- DEV-NOTE: recommended too!
6 )zzopt -> ZaneZam Optimized -> balanced setting with no focus in any direction -
- DEV-NOTE: relict from back in the days, even though some people still like it! -
7 )zzmod -> ZaneZam Moderate -> NEW! setting based on 'zzopt' which has mainly (but not strictly only!) 2 cores online -
8 )zzperf -> ZaneZam Performance -> all you can get from zzmoove in terms of performance but still has the fast -
- down scaling/hotplugging behaving -
9 )zzinz-> ZaneZam InZane -> NEW! based on performance with new insane scaling active. a new experience! -
10 )zzgame-> ZaneZam Gaming -> NEW! based on performance with scaling block enabled to avoid cpu overheating during gameplay -
reserve 1
Thanks for your effort
Any chance of a multi-variant in the future?
djb77 said:
Thanks for your effort
Any chance of a multi-variant in the future?
Click to expand...
Click to collapse
Its with anykernel zip so it will build with your kernel ( need to be on your stock kernel).Its not tested yet but if it boot for g900f variant must boot on some other variant too.
Sent from my Nexus 5X using XDA-Developers mobile app
CrazyGamerGR said:
Its with anykernel zip so it will build with your kernel ( need to be on your stock kernel).Its not tested yet but if it boot for g900f variant must boot on some other variant too.
Sent from my Nexus 5X using XDA-Developers mobile app
Click to expand...
Click to collapse
I'll do a test with G900I and let you know
djb77 said:
I'll do a test with G900I and let you know
Click to expand...
Click to collapse
Thx m8 Need to be on stock kernel and not on any other custom kernel to work correct.
Just to confirm. This kernel works on TW 6.0.1 900f?
owais0903 said:
Just to confirm. This kernel works on TW 6.0.1 900f?
Click to expand...
Click to collapse
Created for that variant and for tw 6.0.1 but need test if boot.
Sent from my Nexus 5X using XDA-Developers mobile app
CrazyGamerGR said:
Created for that variant and for tw 6.0.1 but need test if boot.
Sent from my Nexus 5X using XDA-Developers mobile app
Click to expand...
Click to collapse
Thanks.Will give it a try and let u know.
Boots on G900I fine
owais0903 said:
Thanks.Will give it a try and let u know.
Click to expand...
Click to collapse
Thx ^^
Sent from my Nexus 5X using XDA-Developers mobile app
djb77 said:
Boots on G900I fine
Click to expand...
Click to collapse
Awesome,thx for feedback m8.
Sent from my Nexus 5X using XDA-Developers mobile app
Just flashed your kernel on G900F, running xXx No Limits 4.2 Rom (CPE2).
Seems to be well and stable. Will continue testing.
Gesendet von meinem SM-G900F via XDA-Developers mobile app
G900F, running xXx No Limits 4.2 Rom (CPE2). I got an error during flash:
Installing kernel...
New image larger than boot partition. Aborting...
E: Error in /sdcard/CrazySuperKernel-tw-v1-anykernel2.zip
(Status 1)
E: Installation abortetd.
Edit:
I had phoenix kernel v8 installed, that was the problem.
Flashing this kernel from stock kernel worked.
Edit2:
Can we OC the CPU?
Thank.
Add cpu oc and will be great
Sci-Man85 said:
Just flashed your kernel on G900F, running xXx No Limits 4.2 Rom (CPE2).
Seems to be well and stable. Will continue testing.
Gesendet von meinem SM-G900F via XDA-Developers mobile app
Click to expand...
Click to collapse
Thx for testing
Sent from my Nexus 5X using XDA-Developers mobile app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER
I will not be held responsible for anything that happens to your device after flashing this kernel. If you don't know how to bring your dead device back to life please don't make any modifications and stay with stock MIUI. This is only meant for advanced users.
Zetsubou(aka Despair) kernel is meant to be simple with only cool features added on top of CAF/CM kernel. Kernel source will always be kept in sync with new caf(LA.BR.1.2.9_rbx.xx) and mainstream linux(3.10.y) updates. It will never include features like Undervolt, Quick charge and other potentially dangerous/unstable stuffs. Okay enough of the intro let's move on to the features
Features:
*linux version 3.10.107
*CPU/GPU overclock support upto 1.8GHz/620MHz
*based on caf branch LA.BR.1.2.9_rbx.xx(rb1.24 as of now)
*updated prima drivers(LA.BR.1.2.9_rb1.23)
*HID usb keyboard/mouse support
*sound control
*wake gestures: doubletap2wake, sweep2wake
*sweep2sleep support
*governors: interactive, ondemand, conservative, performance, chill, relaxed, impulse, bioshock and despair
*I/O schedulers: sio, deadline, fiops, noop, bfq, cfq, fifo, sioplus, vr, tripndroid and zen
*custom voltage control
*adreno idler
*adreno boost
*KCAL advanced color control
*DriveDroid support
*advanced TCP congestion algorithms
*disabled crc check
*force fast charge support
*FS: exfat, NTFS & sdcardfs support
*ext4 FS backport from linux-3.18
*f2fs backport from linux-4.13-rc2
*reduced load average
*fsync on/off support
check my source for other features
Use EX KERNEL MANAGER to control all features
Installation:
*Download the zip file and save it into the root directory of internal/external storage
*Reboot to recovery mode and flash the zip file
*Reboot device
It's recommended to flash ZETSUBOU only over stock kernel
Kernel will boot with my recommended settings. Users just need to set their sound control and gestures.
Kernel will boot with stock CPU/GPU frequencies of 1.2GHz/465MHz
DOWNLOAD
Credits:
@ketut.kumajaya hats off to this man for all the work he did for R2
@osm0sis for his amazing AnyKernel2 script
@flar2 for his awesome features
Need a guide to compile ZETSUBOU from source?
- head over here
XDA:DevDB Information
Zetsubou Kernel, Kernel for the Xiaomi Redmi 2
Contributors
Ashish94, ketut.kumajaya, premaca, nicknitewolf
Source Code: https://github.com/AshishM94/android_kernel_wingtech_msm8916
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2017-08-30
Created 2016-12-17
Last Updated 2017-08-30
nice work dev ....
Works on Miui L ?
Ashish94 said:
DISCLAIMER
I will not be held responsible for anything that happens to your device after flashing this kernel. If you don't know how to bring your dead device back to life please don't make any modifications and stay with stock MIUI. This is only meant for advanced users.
Zetsubou(aka Despair) kernel is meant to be simple with only cool features added on top of CAF/CM kernel. Kernel source will always be kept in sync with new caf(LA.BR.1.2.9_rbx.xx) and mainstream linux(3.10.y) updates. It will never include features like Undervolt, Quick charge and other potentially dangerous/unstable stuffs. Okay enough of the intro let's move on to the features
Features:
*linux version 3.10.104
*CPU/GPU overclock support upto 1.8GHz/650MHz
*compiled with my gcc 4.9.4 toolchain using crosstool-ng (source: https://github.com/AshishM94/crosstool-ng)
*based on caf branch LA.BR.1.2.9_rbx.xx(rb1.9 as of now)
*updated prima drivers(LA.BR.1.2.9_rb1.9)
*HID usb keyboard/mouse support
*sound control
*wake gestures: doubletap2wake, sweep2wake & sweep2sleep
*governors: interactive, ondemand, conservative, performance
*I/O schedulers: sio, deadline, noop, bfq, cfq and zen
*KCAL advanced color control
*DriveDroid support
*advanced TCP congestion algorithms
*disabled crc check
*f2fs updated upto V4.10
*reduced load average
*frandom support
*fsync on/off support
check my source for other features
Use EX KERNEL MANAGER to control all features
Installation:
*Download the zip file and save it into the root directory of internal/external storage
*Reboot to recovery mode and flash the zip file
*Reboot device
It's recommended to flash ZETSUBOU only on top of stock kernel
Kernel will boot with my recommended settings. Users just need to set their sound control and gestures.
Kernel will boot with stock CPU/GPU frequencies of 1.2GHz/465MHz
DOWNLOAD
Credits:
@ketut.kumajaya hats off to this man for all the work he did for R2
@osm0sis for his amazing AnyKernel2 script
@flar2 for his awesome features
XDA:DevDB Information
Zetsubou Kernel, Kernel for the Xiaomi Redmi 2
Contributors
Ashish94, ketut.kumajaya, premaca, nicknitewolf
Source Code:https://github.com/AshishM94/android_kernel_wingtech_msm8916
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2016-12-17
Created 2016-12-17
Last Updated 2016-12-17
Click to expand...
Click to collapse
Work Android 7.0?
andreymixmax said:
Work Android 7.0?
Click to expand...
Click to collapse
yes.
aicp 7.1 works.. thanx..
also working fine in mm roms
Wow f2fs. good kernel
does it work on latest Tesla rom?
Really small question, does Kernel Adiutor work?
Cuz Ex kernel thing is a paid app
Hatsoff
Nice work developer, Loved it
potlapalli1 said:
also working fine in mm roms
Click to expand...
Click to collapse
I knew it would work. Can you check if WiFi works?
taalojarvi said:
Really small question, does Kernel Adiutor work?
Cuz Ex kernel thing is a paid app
Click to expand...
Click to collapse
Um No. 1st I'm using a different sound control driver, 2nd there are way too many issues with wake gestures specially dt2w like your half/full screen and 3rd you get what you pay for - a simple, clean & beautiful UI with right selection of features.
Sent from my Redmi Note 3 using Tapatalk
Work MM?
xander21 said:
Work MM?
Click to expand...
Click to collapse
Yes just installed in mm.. Everything works including wifi.. you have to install Ex kernel app to control soundbif you want.. kernel auditor is not showing sound control option
abhianand123 said:
Yes just installed in mm.. Everything works including wifi.. you have to install Ex kernel app to control soundbif you want.. kernel auditor is not showing sound control option
Click to expand...
Click to collapse
Just asking. Im use nugat ROM
Wysłane z mojego 2014811 przy użyciu Tapatalka
I knew it would work. Can you check if WiFi works?
using with nx mm rom everything is working fine wifi also
f2fs support system partition?
Kimikz said:
f2fs support system partition?
Click to expand...
Click to collapse
Yes
Wysłane z mojego 2014811 przy użyciu Tapatalka
Ashish94 said:
I knew it would work. Can you check if WiFi works?
Um No. 1st I'm using a different sound control driver, 2nd there are way too many issues with wake gestures specially dt2w like your half/full screen and 3rd you get what you pay for - a simple, clean & beautiful UI with right selection of features.
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
Thanks for the explanation
Would you mind adding the despair governor,it seems to bring more battery life and stability to our device.