Hi guys.
I just realised (this is probably not news for averyone else)
that the ZU is in the list of official AOSP support, including 5.1 and an M preview.
The one in the Sony website needs to be compiled, but is there any zip I can easily flash to my phone using the custom recovery?
Also, will this rom be able to update automatically?
thanks!
Unfortunately no, you must compile it yourself. The closest firmware to AOSP is the Scrubber's port of GP edition ROM, which with root + Xposed + GravityBox is a perfect ROM, using it for a week now and I won't change it until Android M port from GP edition Hovewer, today (I hope) I am going to compile a Android M build for ZU, if you are interested I can host it somewhere.
Regards
teddy74eva said:
Unfortunately no, you must compile it yourself. The closest firmware to AOSP is the Scrubber's port of GP edition ROM, which with root + Xposed + GravityBox is a perfect ROM, using it for a week now and I won't change it until Android M port from GP edition Hovewer, today (I hope) I am going to compile a Android M build for ZU, if you are interested I can host it somewhere.
Regards
Click to expand...
Click to collapse
please do!
Okay, I will try, fingers already crossed
Regards
Building guys, so far no errors I think it will be ready in an hour, then I will host it on my Gdrive
Regards
I wanted to ask the same thing, i's a big learning curve for a noob like me. That's awesome that somebody with nowledge can compile it and share, me and my friend want to try it out, especially for Dose and Storage Inherit functions
It is still compiling which is good and bad, good because it indicates there are no errors and bad because I probably won't make it today but I will host it as soon as I can and give you guys a link
Regards
EDIT:
Finished uploading ^^
EDIT 2:
Okay guys, here is the link: https://drive.google.com/file/d/0B4TtJUVLy_SlZ3NDUDVOVk5XaWs/view?usp=sharing
Flash everything except userdata.img, it will wipe all your data, including internal memory, so photos and stuff will be gone but if you don't care about them, you can flash it as well. Before install, wipe data in TWRP or other recovery. Flash using fastboot:
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img (not necessary)
fastboot flash data userdata.img (not necessary if you wiped data in recovery)
Of course, I am not responsible for broken Ultras etc. and it is only for unlocked bootloaders. I haven't tested it because of low battery but it should boot without any hiccups. Happy flashing!
Regards
Just flashed it. Okay, just at first glance I can say that it's totally not worth trying for you guys.
for me the Bluetooth Exchange is crashing constantly, very annoying.
the whole system is barebones as expected.
camera doesnt work at all, there is no SIM reception.
not exactly a daily driver, nice to see it booting, but that's that
EDIT:
Also I feel a bit cheater on by Sony.
This looks nothing like M build on Nexus devices, it even says Lollipop on the easteregg
No new features from M in settings. So, what is this, Sony lied?
Yup, at the first glance I thought that this is a Lollipop, exactly nothing new.
Bluetooth exchange crashed for me a few times but it stopped somehow and really, this thing is far from the M Preview from Nexus devices, I am a bit disappointed too
Regards
Related
i currently use metro pcs . i would like to buy a good phone.
ive been considering the samsung j7 but the specs on the honor 5x look better.
ive been reading up and it looks like it accepts the metro pcs sims.
according to various reviews, the main issue with the honor 5x is the android interface.
i would like to know which is the best way to get a stock android rom while keeping the phone functional. ??
would installing a stock android be alot better than the current interface the phone comes with ? { is it worth it }
also .. can i play games like hitman sniper on the honor 5x ??
Got Modacco rom no problems or lags i camera from almost stock android
i just bought the phone from new egg, now im looking for a tutorial that shows how to change to a custom rom.
also... instead of custom rom, will i be able to increase performance by using another launcher instead of emui ??
or
am i better off installing a custom rom for maximum performance ?
towncarblue said:
i just bought the phone from new egg, now im looking for a tutorial that shows how to change to a custom rom.
also... instead of custom rom, will i be able to increase performance by using another launcher instead of emui ??
or
am i better off installing a custom rom for maximum performance ?
Click to expand...
Click to collapse
Nova Launcher is considerably better than the stock EMUI launcher, though I'm not sure that would increase performance... If a faster phone's what you're looking for, then flash a custom ROM, preferrably one that's debloated and as close to AOSP (stock) as possible, so you don't have Huawei's apps slowing down your device. I'm currently using EMUI and fine with it until fingerprint support comes to stock ROMs, but many people agree that customs are much better, faster and stable than EMUI.
Since you didn't specify wether it's your first time flashing a ROM or doing advanced stuff, I'll advise you to read up carefully and thoroughly about what you're getting into - step-by-step guides are nice, but knowing what you're actually doing will most definitely come in handy in the future!
ive flashed a couple of tablets and phones.
theres two so far im willing to try , cm12 and modaco
ive been doing some research and I have some questions....
1- with cm12 does every thing work fine ? ex. fingerprint hdr etc..
2- with modaco does everything work fine ? ex. fingerprint hdr etc..
i want all of the phones features without any compromise
towncarblue said:
ive flashed a couple of tablets and phones.
theres two so far im willing to try , cm12 and modaco
ive been doing some research and I have some questions....
1- with cm12 does every thing work fine ? ex. fingerprint hdr etc..
2- with modaco does everything work fine ? ex. fingerprint hdr etc..
i want all of the phones features without any compromise
Click to expand...
Click to collapse
only the stock base roms have FP support ...Modaco is a stock base rom
none of the CM based roms have FP support - bliss - crdroid - aokp - RR - cm12 and cm13 all fall in this category
towncarblue said:
ive flashed a couple of tablets and phones.
theres two so far im willing to try , cm12 and modaco
ive been doing some research and I have some questions....
1- with cm12 does every thing work fine ? ex. fingerprint hdr etc..
2- with modaco does everything work fine ? ex. fingerprint hdr etc..
i want all of the phones features without any compromise
Click to expand...
Click to collapse
Hey. I have the honor 5x too. I installed a rom called resurrection remix os.
(http://forum.xda-developers.com/honor-5x/development/rom-resurrection-remix-os-t3386555)
It is a really solid ROM and increases your performance greatly. It is based on cm 13. Everything works and is stable (on my phone at least). The only thing that doesn't work is the FP scanner. I only tried this ROM so I don't know how the other ROMs for this device perform. So far this has been a really stable option for me. Try it if you want.
Sent from my KIW-L21 using XDA-Developers mobile app
jimandroidnerd thncx for the input , i will try it first to see the best performance the honor 5x can give.
im mainly looking at "modaco" rom or the " rom-stock-b151-stock-rooted-deodexed-t3355130 " because they are either the stock or based on the stock rom.
also i want that fp scanner to work.
WAIT... i just noticed that modaco is only for the KIW-L21 ???
im getting a KIW-L24. what are my best options now with fp support??
towncarblue said:
jimandroidnerd thncx for the input , i will try it first to see the best performance the honor 5x can give.
im mainly looking at "modaco" rom or the " rom-stock-b151-stock-rooted-deodexed-t3355130 " because they are either the stock or based on the stock rom.
also i want that fp scanner to work.
with the stock-rooted-deodexed rom will i receive ota updates from the phone manufacturer ??
Click to expand...
Click to collapse
you can't install updates with TWRP/Root on your phone
ok , no updates . no biggie.
what is my best rom options for a KIW-L24 ???
towncarblue said:
ok , no updates . no biggie.
what is my best rom options for a KIW-L24 ???
Click to expand...
Click to collapse
Honestly, if you so desperately want FP support, stay on stock, or debloated which would be the most "custom" you'd get afaik. I'm also waiting for FP support so I know the feeling... There are some nice features in EMUI (that Themes customization app is a great thing honestly, I love it, for example) but I would like to run a custom ROM someday. We'll have to wait for the security base release I guess...
ima put in a stock.debloated.root rom and call it a wrap.
if im unsatisfied with the performance ill try resurrection remix os
and just not use the fingerprint.
im getting a KIW-L24 { as mentioned in post #8}
modaco is only for KIW-L21 { as far as i know }
i want a debloated rom that is stable , no glitches .
all reviews i read so far for this phone are positive,
except the emui interface and the preloaded bloatware .
i know im buying a budget phone , but i want it to work as smooth it possibly can
Arobase40 said:
My bad, I missed the conjunction "or" in your sentence : "im mainly looking at "modaco" rom or the " rom-stock-b151-stock-rooted-deodexed-t3355130 ""...
But nobody than you can say what is a bloatware or not so even though Clsa's rom is good better create your own ROM removing what YOU consider as bloatwares.
Since Xposed framework v83 you can also install it by yourself without the need of a deodex firmware : you just have to consider the pros & cons of "deodex vs odex firmwares". Actual working version of Xposed framework for the Honor 5x is v85.
The other problem except EMUI is the lack of OTG feature as default and some other few stuffs...
Click to expand...
Click to collapse
Well, you actually CAN tell what is bloatware and what isn't, the only difference would be wether you find a particular app useful enough to not consider it a bother on the system...
There's basically no theoretical downside to deodexed ROMs or files, apart from boot time if you wipe dalvik. A question: is Xposed v85 a flashable .zip like normal Xposed? I read somewhere on here that you had to modify system files to do that, but I'f be very happy to know that the Honor 5X now has proper and easy Xposed installation available.
Arobase40 said:
Well I won't argue on what is bloatware or not as this is mainly personal to one another and I won't argue either against deodex vs odex ROM as as I said we now have the choice between apps customizations and ROM performance...
What only matter is your question : you can flash any Xposed Framework zip file with TWRP, but since v83 till v85 you can flash them whether you have deodex or odex firmware and the only change you have to do is to modify the build.prop file.
I actually have Xposed Framework v85 on my odex firmware and it works pretty well.
Click to expand...
Click to collapse
So by flashing v85, I still have to change the build.prop file? Is there any guide on doing this? Honestly I'd rather wait for v86 if it means not having to edit system files, but if it's unavoidable, then I guess it can't be helped...
just got the phone yesterday. after i deleted some apps and changed emui to "google now launcher"
it seems to run fine. ill give it a week before i start changing the rom
Arobase40 said:
I don't think a v86 would be of any help, just a new Xposed framework installer app...
Otherwise you simply need a root explorer (or kind of same app with root rights).
If you don't want to do the changes directly into your system, you can copy the build.prop file to your Sd Card (keep an unmodified copy somewhere just in case), and do the changes from there with a notepad or such. Then copy the modified build.prop back to the system folder keeping the same permissions and reboot... That's it !
Click to expand...
Click to collapse
I'm actually reluctant to modify system files if at all possible not to do so since I almost bricked my 5X doing just that (well, kind of, stupid mistake but still...). I'm missing the easy Xposed framework installer honestly. I really hope someone creates an installer for this, or a single flashable zip that also modifies build.prop...
I also just got the device yesterday. Was surprised it allowed me to delete the bloatware on it! I guess they were nice and did not install them on the system partition.
ALso interested in any performance tweaks. Like the phone and os in general but with "budget" processor it would be good to have it running as light on resources as possible.
johnciaccio said:
I also just got the device yesterday. Was surprised it allowed me to delete the bloatware on it! I guess they were nice and did not install them on the system partition.
ALso interested in any performance tweaks. Like the phone and os in general but with "budget" processor it would be good to have it running as light on resources as possible.
Click to expand...
Click to collapse
For performance there are custom, stock or debloated ROMs, and in case you're looking for something in addition to EMUI in order to make it faster I recommend you the apps "L Speed", "Greenify" (guessing you already know this one), and "Kernel Adiutor" if you're into kernel tweaking. Putting your cores on Performance governor should speed the device like hell, at the cost of battery life, but you can tweak it to a smaller degree and find your balance.
Arobase40 said:
Then write a mail or a post to the author of the Xposed installer and ask him if he could create a specific installer for the Huawei/Honor devices... ^^
Click to expand...
Click to collapse
Wrote a post on the thread that was ignored, lol. It says on the FAQ that there can be problems with Huawei/Xiaomi as they are chinese manufacturers and do things differently to, say, Motorola, so I'm guessing I won't get a reply no matter how loud I cry out.
Arobase40 said:
Maybe you could try with a more polite way ? lol
Click to expand...
Click to collapse
But I was polite though... I think. It's probably got more to do with the fact that it's the general Xposed thread so your message gets buried behind bug reports and other questions, I guess. I was searching for other ways of contacting the dev but desisted upon finding that in the FAQ.
Hello!
.
can anybody help me in getting the s7 theme engine & theme store for Galaxy s5 G900H on stock MM 6.0.1 ..
.
please help me in getting theme store and engine ..
.
thanks in advance!:good:
Flash custom ROM
Video with links to files, and other hopefully useful info. FOR A SOLUTION!
I had a really long post with useful info containing an answer maybe not "the answer" Wanted me to instead post a comment.. Below are the instructions on how to do it according to a Youtube Video I found. While I haven't tried this method, It looks sound to me, they've included all the files needed in a link to MEGA. I'll re-share without the password / decryption key if the poster agrees only.. I do highly suggest Phoenix ROM if you're on a kltevze, it come included with eveyrthing you're looking for and I've used it before In fact, I tried it last night but was unable to get into my phone past the boot password screen I think because the system ui kept crashing. while I have used this version, I may try twelve, since I prefer AOSP or LOS based roms, I want as light as possible maybe even removing google and going with MICRO G which I used fairly successfully for over a month, It isn't perfect, sometimes the location addon apps crash, but there are many, and it may just be that the ones I was using crashed, and not the ones you need yourself.. But MICRO G is worth the piece of mind to me coming from an encrypted phone, No I have nothing to hide really but Alphabet/Google already know enough about me through the use of their "FREE and Very Handy I might add, Services Ahem) By the way, Phoenix can be used with either an unlocked bootloader or safestrap if not.. Just get the right one.. I may end up going with a rooted deodexed TW rom, and add xposed to get the features I love from RR and other LOS based ROMS. With further ado, heres the link to the youtube instructional video I found, I really wish it was written out or could simple installed as a flashable zip which shouldn't be hard to make, but it is what it is for now.. And again seems correct to me if you don't want o go with a custom rom like Phoenix for kltevzw.
Well upon testing the Youtube link didn't play so here it is both Title for searching and another link. Install Galaxy S7 Touchwiz on S5! (Marshmallow) /URL]
https://www.youtube.com/watch?v=tsiKG98GVBA
I used Heimdal to flash to a more recent factory TW before flashing Phoenix which requires at least PB1. I think. Check their OP under user JKRUSE or near the top of the VZE dev thread.
This is Heimdal as found in synaptic from a buntu based distroand should be the same in any Debian based or any other distro for that matter as I've found it in many repos for different distro's, I think a ppa is available with newer builds, but don't hold me to that.
Heimdall <- commandline version.
Heimdall is a tool for flashing firmware (aka ROMs) onto Samsung Galaxy S
devices over a USB connection. It accomplishes this using the same
protocol as Odin, Samsung's internal Windows-only firmware updater.
Click to expand...
Click to collapse
And of course there's a GUI too.. heimdall-flash (1.4.1-2) unstable; urgency=medium
This package includes a Qt-based frontend for managing Galaxy devices.
Click to expand...
Click to collapse
If I do either agian soon, I'll report back with results. Again, I know Phoenix worked fine. But I'd imagine a plain TW rooted ROM that you debloat yourself and maybe add Xposed for many features found in Phoenix and in AOSP/LOS based ROM's such as RR/CR-DROID for those who prefer additional tweaking and other enhancements. Again I trouble just last night with the latest V15 of Phoenix on boot and don't know why other than my fully ecnypted device and password on boot feature But either way again if you test before me let me know the result as well. I do need a new battery for mine since it's the one it came with but that's a story for another thread, when I bought my S5 last spring for beans, (with the unlockable BL, I had to have it since my S3 had died. and I couldn't afford a new phone) and I could easily get a day plus when service is good with about 4+ hours SOT. But lately I'm using charging by the end of the day. Haven't decided yet on a stock Sammy battery or a more expesive, Thicker, heavier, but much longer lasting extended battery.
Sorry for such a long winded post. All my posts are this way if you know me. I do apologize and need to be more brief but I'm more of a lurker and searcher for what I need to know and post very seldom especially with this much what I think could be useful to someone.
If it happens to be useful please hit the "Thankss" button, it could help here, and even when looking for a job as I am... Hahahaha.. Getting laid off work blows in my area of the country.
Thanks and Happy New Year to all those who celebrate it during this time of year, if not Happy New Year when it arrives and I wish the best for everyone on the Planet. Stay informed and don't believe everything you read/hear/watch... #NoAgenda #ITM.
griz.
Even the auto-search after entering thread title returned only threads with 0 replies...
So i have some no-brand chinese MT6580 running Lollipop 5.1 - not KitKat.
All the automatic and semi-automatic recovery porting tools work only for GB/JB/KK
Sadly the MT6580 kernel source was never leaked, so no compiling also.
Any way to get anything working? i would be even happy with a non-Touch CR...
Bumping this one as I am also looking for a way to port TWRP to my Galaxy S7 clone. And yes, it seems that none of the recovery porting tools seem to work on my end either. :/
TWRP for MT 6580 w/ lollipop 5.1
blakegriplingph said:
Bumping this one as I am also looking for a way to port TWRP to my Galaxy S7 clone. And yes, it seems that none of the recovery porting tools seem to work on my end either. :/
Click to expand...
Click to collapse
I've hacked together a TWRP image for a FiGO "Virtue 2", 512MB, 8GB, MT6580, 5.1 but it is larger than the upload limit so I can not attach it for you. It seems to work with the possible exception thus far of not finding OTG storage, an issue which shall not keep me up at night. Installs, backs up, recovers ..... so far so good.
DISCLAIMER: As everyone says, use at your own risk. If the aliens come and take away your house pets or you experience any other device related or coincidental calamity of any kind, there's nothing I can, should, or will do about it.
Used the Carliv Image Kitchen, my stock recovery image, a TWRP image I found for an Infinix "Hot 2" and the general procedure found at this URL
http://www.xposedgeek.net/how-to-port-philzctrcwmtwrp-recovery-to-your-phone/
If you have the flash stuff for your factory build like I did it is probably a piece of cake, because I am pretty new at this sort of thing and if it can be screwed up I usually can find the way to do so. Took about an hour including thinking time before hitting the button. I was either brave or stupid and didn't even set up a virtual test first, but it works :cyclops: The Almighty must approve of my actions at some level.
Proceed with appropriate caution.
Hope that helps.
nezlek said:
I've hacked together a TWRP image for a FiGO "Virtue 2", 512MB, 8GB, MT6580, 5.1 but it is larger than the upload limit so I can not attach it for you. It seems to work with the possible exception thus far of not finding OTG storage, an issue which shall not keep me up at night. Installs, backs up, recovers ..... so far so good.
Hope that helps.
Click to expand...
Click to collapse
The lack of OTG support is indeed something of a shame, but at least this is something. Thanks for the tip mate!
EDIT: OK, so I managed to port TWRP to my device. Only problem is that I had to fiddle with the partitions, and for some reason there seems to be no other way to flip the screen back other than compiling another TWRP image or google my way through a compatible prebuilt by some kid online. I'll post my flipped-screen version ASAP when I get to compile that thing myself.
Sorry for the double-post, but here's the source-built port I made for inverted framebuffers:
https://github.com/huckleberrypie/android_device_alps_z6u030
I made it for clone devices in mind, but feel free to port or fork this in case you need to use this on your phone.
blakegriplingph said:
Bumping this one as I am also looking for a way to port TWRP to my Galaxy S7 clone. And yes, it seems that none of the recovery porting tools seem to work on my end either. :/
Click to expand...
Click to collapse
Sir please port samsung c7 clone
This is a message to the remaining users of the former Xperia flagship, in particular mini and mini pro. I know that you are still out there and using this magnificent piece of device. I have a question for you.
What rom combination are you guys using in 2017 which provides the phone to be most stable. Development has ceased and most of the rom links are broken or dead. But there still is some shimmering light, like cm 13 legacy rom. Also a few threads still cover mirror links.
Can you please share your experience in this thread.
I use my xperia mini as a mp3 player and alarm clock now.If you want a stable rom use official cm 11 kit kat rom.I know there are android 5 and 6 roms out there but they are heavier and not so stable in my opinion.Cm 11 works absolutely bugfree, or at least i didn't encounter any bug.Keep in mind though that you can't use it as a smart phone nowdays, a single heavy app running will fill the entire ram and make the phone lag.But still is a great phone for ordinary usage.
T3sla said:
I use my xperia mini as a mp3 player and alarm clock now.If you want a stable rom use official cm 11 kit kat rom.I know there are android 5 and 6 roms out there but they are heavier and not so stable in my opinion.Cm 11 works absolutely bugfree, or at least i didn't encounter any bug.Keep i mind though that you can't use it as a smart phone nowdays, a single heavy app running will fill the entire ram and make the phone lag.But still is a great phone for ordinary usage.
Click to expand...
Click to collapse
That sounds nice, will see if I'll try cm11. Currently I'm on radium v4 rom from karandpr. This basically is a heavily stripped stock rom, with speed and battery enhancements. Its really fast and covers all basic needs. Although it is true that apps from nowadays are to heavy. Bright side is that we can still find light weight apps on playstore for almost all needs
Hello
winesh said:
This is a message to the remaining users of the former Xperia flagship, in particular mini and mini pro. I know that you are still out there and using this magnificent piece of device. I have a question for you.
What rom combination are you guys using in 2017 which provides the phone to be most stable. Development has ceased and most of the rom links are broken or dead. But there still is some shimmering light, like cm 13 legacy rom. Also a few threads still cover mirror links.
Can you please share your experience in this thread.
Click to expand...
Click to collapse
Hi, I recently got one of these and, due the lack of time I was without android, I know nothing these days. Could you help me out with links to root it or flash custom roms? Mine here is a Xperia Mini Pro, model SK17a, Android 4.0.4 untouched, version 4.1.B.0.587. Is there a way? Thanks anyway.
shadowkriptos said:
Hi, I recently got one of these and, due the lack of time I was without android, I know nothing these days. Could you help me out with links to root it or flash custom roms? Mine here is a Xperia Mini Pro, model SK17a, Android 4.0.4 untouched, version 4.1.B.0.587. Is there a way? Thanks anyway.
Click to expand...
Click to collapse
There are lots of ways, it depends on your preference. For example do you want to modify system partition (flashing kernel), you need to unlock your bootloader. If you want to flash rom only, you can maintain your locked bootloader. Basically this are the steps:
1 backup necessary data
2 root (one click or comprehensive)
3 unlock bootloader (optional)
4 fastboot flash cwm recovery/kernel of rom choice
5 wipe
6 flash rom through cwm recovery
Like I said there are many ways. There is an index thread in the development section, which contains tutorials for al the steps I just mentioned.
Hi again,
I finally found the way to make things work with the SK17i!! At the moment I'm trying to install ROMs and see whats working or not. This Radium ROM you are using, do you have the links to download? Does it works with nAa JB kernel? Thanks!!
winesh said:
There are lots of ways, it depends on your preference. For example do you want to modify system partition (flashing kernel), you need to unlock your bootloader. If you want to flash rom only, you can maintain your locked bootloader. Basically this are the steps:
1 backup necessary data
2 root (one click or comprehensive)
3 unlock bootloader (optional)
4 fastboot flash cwm recovery/kernel of rom choice
5 wipe
6 flash rom through cwm recovery
Like I said there are many ways. There is an index thread in the development section, which contains tutorials for al the steps I just mentioned.
Click to expand...
Click to collapse
shadowkriptos said:
Hi again,
I finally found the way to make things work with the SK17i!! At the moment I'm trying to install ROMs and see whats working or not. This Radium ROM you are using, do you have the links to download? Does it works with nAa JB kernel? Thanks!!
Click to expand...
Click to collapse
Radium is based on ics. Rom was working perfectly. I only had problems with a few app compatibility. That is why i switched to los 14.1.
winesh said:
This is a message to the remaining users of the former Xperia flagship, in particular mini and mini pro. I know that you are still out there and using this magnificent piece of device. I have a question for you.
What rom combination are you guys using in 2017 which provides the phone to be most stable. Development has ceased and most of the rom links are broken or dead. But there still is some shimmering light, like cm 13 legacy rom. Also a few threads still cover mirror links.
Can you please share your experience in this thread.
Click to expand...
Click to collapse
test cm7.3 the last one that they took with GB for this cell phone
google.com/site/projectfreexperia/download/cyanogen-mod7
add sites. before google, i can´t post complete URL
Hi guys,
this is my first experience report about my new Poco X3 NFC with Miumi 12 after 14 days in use....
To explain: 2 years ago i got my first xiaomi redmi note 6 pro global. This machine is a fine thing, but i never liked the miui surface. So i decided to unlock and root the phone and use a custom rom. This was the very best decision for me.
So far, so good... At least i bougth my new Poco X3 NFC and i got 14 days ago. I heard a lot of "good" things about the new Miui 12, so that was one reason for me to catch this deal....
After nearby 14 days using this phone with this original surface Miui 12 i can say: it sucks, nothing else but the original apps are running smooth. It is nearly impossible to run an alternative launcher, really nothing runs flawless on this terrible, awful surface! The simplest things like "notification badges" etc. are not present, they still are not in function...
Ok, Miui "spend" a launcher: Poco Launcher. Hmm, nearby, but (for me) lightyears away from any kind of personalization. Change icons? Runs partially... Want to unlink the fu..... ring- and notification sounds? Misrepresented!!! This (for me) confusing settings menu? There is no better thing than a clean android system or custom rom!
The next annoying crap is the annoying advertising - i spend a "little" time to "destroy" this really sucking "feature".....
Oh, before i forgot: i tried to run the launchair launcher, ruthless launcher, nova launcher, microsoft launcher and at least hyperion launcher. With all this launchers it is on my phone totally impossible to run all features - on every other phone with custom rom or original they run like hell!
The one and only way to operate this phone "fine and smoothly" is this: leave it in its original condition! But who wants this? Personalization? Inadequate....
But yes, there are two things they are fine: the energy options and the camera app. But thats it for me.
So, this is my experience after 14 days and the next thing i will do is unlock the bootloader, install a recovery systen (maybe twrp or orange fox) and root the phone with magisk. With this solution i hope to improve some things - i 'll keep testing this
Best wishes and greets
I'm using Nova Launcher on all devices since a couple of years. Mui has the habit of preventing background tasks and autostart(never saw this before) for all apps except Xiaomi and Google ones and probably a few other. Autostart, notifications and widgets i only need for a handful of apps(including the launcher), and none of these worked out of the box.
But all relevant options are bundled in the app's context menu, no scrolling thru huge lists including all the system apps. Simply allow autostart, disable powersaving and give the app more or less all access rights. Running pretty well now. It's only the most bloated phone i ever had, but also the most powerful, so thats not an issue at present.
Hi lecorbusier,
thanks for your answer.
With your sentence >It's only the most bloated phone i ever had, but also the most powerful< your totally right
Yesterday i unlocked my X3, flashed TWRP - and wow: System destroyed....
Turned to fastboot, flashed OrangeFox, puh, it 's not broken....
Flashed Magisk also and today i will see what happen....
Lmao, who told you that MIUI is a good thing. It's ok, but compared to custom ROM it sucks.
If you want to try custom ROM, ArrowOS is the best optimized custom ROM + Void custom kernel If you want maximum fluidity/smoothness as it's optimized for minimum latency and jank. Battery life is still good in my usage, maybe 2 hours less maximum, but it's worth it. With stock kernel, SOT is a bit better.
ArrowOS gets improvements every day on ROM side with fixes & improvements + occasionally improvements & fixes to the device side.
I tried 5 other custom ROMs (crDroid, Resurrection Remix, LineageOS 17.1, CorvusOS, NitrogenOS) and that's my experience.
Everything works except fast charging information with Xiaomi charger (all custom ROMs have this issue) & Miracast (which I'm not sure if it works or not since I never used it).
So all in all, just flash custom ROM in this one too!
Devil's advocate here ( ), Xiaomi.eu with updated firmware and Stormbreaker kernel feels smooth as butter here -- but it takes some intensive tweaking.
Hi there, good morning from Germany
A short "update"....
After "repairing" (see 3 posts above) I've done the following:
Installed Lsposed (Magisk), installed CustoMIUIzer and started "playing" with the mass of settings in it....
What should I say: I'm pretty impressed.
Almost everything is going as hoped and does what it should! Till now I got no numbers on my notification badges, but this is a part I can live with.
That doesn't mean that i have changed my opinion about the MIUI-Surface, especially the terribly nested settings.... But with a bit of work you can establish a relatively well-running system that you can personalize according to your wishes.
So for the moment I'm pretty happy, but I'm still testing...
Ah, before i forget to mention: magisk and safetynet was another problem. I have found a module that works (for me), look here
So, thats it for today, many greetings and happy easter
Hello everyone,
here 's another short update for miui....
The good news first: it runs, Ruthless Launcher is working, original camera app is fine, other things: see my post above...
That 's it!
Unlock by (or with) bluetooth??? Fail! It seems that Xiaomi only supports its own devices - what a crap.... I clearly miss this function.
I stick to my opinion: miui sucks....
The only point that keeps me from installing a custom rom is the camera app (at least for the moment)...
My conclusion: to use all possibilities of this device you "must" use a custom rom, otherwise you have to live with the restrictions
thueringer said:
The only point that keeps me from installing a custom rom is the camera app (at least for the moment)...
Click to expand...
Click to collapse
My main reason to keep Xiaomi.eu, too. When LOS becomes official, I'll brace myself for intensive testing of camera alternatives...
for me, personally, i dont like miui as well. luckily we have a bunch of custom roms out there and even i found a better rom for my daily use, i still try flashing some rom to experience some other features. tho, at the end of the day, i end up using my rom that i am using daily. if you want the rom with alot of customization, have a good BB, and have miui camera, i suggest to use Ancient OS
Hi all together
@dahrel22: thanks for your tip, it seems like this is what i was looking for...
I think I'll test it out, I can't do more than break it
Have a nice Sunday, many greetings from here...
thueringer said:
Hi all together
@dahrel22: thanks for your tip, it seems like this is what i was looking for...
I think I'll test it out, I can't do more than break it
Have a nice Sunday, many greetings from here...
Click to expand...
Click to collapse
yes bro you better try it. im currently using the old build which is the miui verdor based. the new build comes with oss vendor but i think im not ready to flash it. i having trouble keeping my phone decrypted from oss vendor based roms. so i'll still be using the old build.
After the updates my Poco x3 NFC restarts in stand-by mode or when I'm using whatsapp, suddenly the screen goes to black..and then back to the homescreen... :/
Does anybody tried a custom rom? I would like to give a try.
Hello to everybody,
here 's my newest experience with "Miui-machine"...
I tried the tip from dahrel22 (see 4 posts above) und flashed Ancient OS 5.3 - I did everything according to the description, but in the end I had an encrypted partition on my phone....
Yesterday I had the great idea to cleam my device up und flash it again...
What can i say: it was a horrible trip
Like before I 've done everything as described - but it ends with a lot of issues like "no root" and "no system" directory, unable to mount system partion and so on and so on... This action cost me a lot of annoyance
(I tried this with two custom roms: Ancient OS 5.4 and Evolution X).
I was then able to revive the device using fastboot and the mi flashtool.
The Mi-Flashtool also ended with an error, but the system works - for whatever reason???
So at the moment I'm "driving" this damn Miui again and I'm really pissed off!
Maybe someone from you has a "smooth" idea to solve my problem??
Many greetings and thanks
thueringer said:
Hello to everybody,
here 's my newest experience with "Miui-machine"...
I tried the tip from dahrel22 (see 4 posts above) und flashed Ancient OS 5.3 - I did everything according to the description, but in the end I had an encrypted partition on my phone....
Yesterday I had the great idea to cleam my device up und flash it again...
What can i say: it was a horrible trip
Like before I 've done everything as described - but it ends with a lot of issues like "no root" and "no system" directory, unable to mount system partion and so on and so on... This action cost me a lot of annoyance
(I tried this with two custom roms: Ancient OS 5.4 and Evolution X).
I was then able to revive the device using fastboot and the mi flashtool.
The Mi-Flashtool also ended with an error, but the system works - for whatever reason???
So at the moment I'm "driving" this damn Miui again and I'm really pissed off!
Maybe someone from you has a "smooth" idea to solve my problem??
Many greetings and thanks
Click to expand...
Click to collapse
im feel so sorry when i read your experience. maybe some confusion because 2 builds at the same version have different vendor based. both of them are comes with 5.3 but one comes with miui, one comes with oss. as i say i really have a hard time to keep my phone decrypted on oss when im using orange fox (now im in twrp but still no planning of flashing oss) if you flashed the old build, i mean the miui vendor based build, i think the outcome will be better.
what version of miui are you into right now?
edit: you know i feel bad for you as you need to do this "mi-flashtool" kind of stuff. next time, if you make mistake flashing something, i suggest just to flash miui rom again (miui eu will do) using recovery (i suggest twrp). i did that before many times and it never fails me.
dahrel22 said:
im feel so sorry when i read your experience. maybe some confusion because 2 builds at the same version have different vendor based. both of them are comes with 5.3 but one comes with miui, one comes with oss. as i say i really have a hard time to keep my phone decrypted on oss when im using orange fox (now im in twrp but still no planning of flashing oss) if you flashed the old build, i mean the miui vendor based build, i think the outcome will be better.
what version of miui are you into right now?
Click to expand...
Click to collapse
Hi dahrel, at the moment I 'm on Miui 12... I tried to flash with OF and TWRP.
thueringer said:
Hi dahrel, at the moment I 'm on Miui 12... I tried to flash with OF and TWRP.
Click to expand...
Click to collapse
with the newest miui 12.0.9 from xiaomi eu? have you flashed the decrypted vendor? then try to flash the oldest ancient 5.3, anyways, one more stable rom i used is PE+. the new anx cam 2.4 works pretty well.
dahrel22 said:
with the newest miui 12.0.9 from xiaomi eu? have you flashed the decrypted vendor
Click to expand...
Click to collapse
Hi dahrel22, I used the Miui 12.0.8 global. What do you mean with the decrypted vendor?
I don't know the PE+...
thueringer said:
Hi dahrel22, I used the Miui 12.0.8 global. What do you mean with the decrypted vendor?
I don't know the PE+...
Click to expand...
Click to collapse
oh i mean, you keep your phone decrypted?
i usually flash the unencrypted vendor so i dont have to flash dfe. you can find it from here.
12.0.8.0
[PATCH] Disable encryption for XIAOMI.EU ROM
disable data encryption, MLC nand write cycle is limited and encryption is make it worst how to : - download and unzip xiaomi.eu_multi_POCOX3NFC_V12.0.4.0.QJGMIXM_v12-10.zip - download and unzip vendor patch...
forum.xda-developers.com
and for 12.0.9.0
[PATCH] Disable encryption for XIAOMI.EU ROM
disable data encryption, MLC nand write cycle is limited and encryption is make it worst how to : - download and unzip xiaomi.eu_multi_POCOX3NFC_V12.0.4.0.QJGMIXM_v12-10.zip - download and unzip vendor patch...
forum.xda-developers.com
thanks to @inunxelex
which rom you want to flash now?
Hi dahrel, thank you very much for the links above
I 'm not sure which rom i 'll flash next time - maybe Ancient OS or Evolution...
are you following poco x3 updates on telegram? you can find alot of custom roms from there. some are those you cant find here.
POCO X3 | Updates
All about POCO X3 ROMs, Kernels, Guides, Mods, NEWS, everything. Stay up-to-date with us! Official Group: @PocoX3GlobalOfficial
t.me