IMEI1, IMEI2 & MEID all NULL after upgrade to v3.15 - PLEASE HELP - ZTE Z7, Z7 Max, Z7 Mini

Guys,
I have a huge problem. I upgraded to v3.15 and the sims don't work. I check the IMEIs and MEID both reported to be NULL. Does anyone have a solution? I have searched the forums with few guys having the same issue but there is yet to be any solution.
Joey

ecutech said:
Guys,
I have a huge problem. I upgraded to v3.15 and the sims don't work. I check the IMEIs and MEID both reported to be NULL. Does anyone have a solution? I have searched the forums with few guys having the same issue but there is yet to be any solution.
Joey
Click to expand...
Click to collapse
Nubia tool made an imei backup on you C drive. Just use this tool to recover your imei. This option not always works, but worth a try.
Other option is Qualcomm QPST. Find a tutorial on google and you'll be OK.

Related

[Q] my phone lost imei and not registered on network

my phone imei number changed
it have different one of the original phone imei number
i try to fix it with ariza patch but not working
also tried to flash xxemg4,DDEMG2 on android 4.1.2 but also not working
i change android version to android 4.2.2 and try flashing them again but not solve the problem
always get not registered on network
help me please
Use the search facility to find the hundreds of similar posts. Unless you have a backup of your efs then you need to pay for a repair.
Sent from my GT-I9300 using Tapatalk
Search and you shall find the answers to what you seek.
On that note, thread closed.

[Q] MT6572 IMEI null problem

Hello guy..!
I have a problem with my my former android v4.2.2 tecno s3, which later I updated it to android m3 v4.2.9 tecno m3 custom rom.
my device launched properly, but there is the problem with SIM card reading whereby there is a notification which say No sim card detected,
I tried to connect to MTK droid & tools and it shows that both IMEI 1 and IMEI 2 are null.
I need your help since I appreciate your skills and effort in helping others.
How to solve this problem??
Kanyopa Jr said:
Hello guy..!
I have a problem with my my former android v4.2.2 tecno s3, which later I updated it to android m3 v4.2.9 tecno m3 custom rom.
my device launched properly, but there is the problem with SIM card reading whereby there is a notification which say No sim card detected,
I tried to connect to MTK droid & tools and it shows that both IMEI 1 and IMEI 2 are null.
I need your help since I appreciate your skills and effort in helping others.
How to solve this problem??
Click to expand...
Click to collapse
Hi. I have the same problem. U solved your problem? If yes can you help me?
I already tried almost everything (MTK Droid Tools, Imei.exe, etc), always write error.
I lost the important files .nv_data.bak e .nv_data.bak.md5 that i think can't be created, before i backup .
Thank you!

Cubot X6 - NVRAM problem

Hi, I have problem with my phone (Cubot X6). Phoning ability is broken. My phone is now little tablet only
I haven´t much experiences with android flashing.
I think, NVRAM is corrupted and a I have no backup. I tried to change my IMEI number, but it helped once only, but it broke up in a few hours.
I am searching for someone with same model - I need the NVRAM backup / radio firmware. Of course, I will change your IMEI numbers for my own.
I will be glad, if you write me some tutorial.
If it helped me, i will give you some thankful reward (about 10 USD, PayPal).
I have the same problem....... please can you send me the nvram.bin?
paapaastrumf said:
I have the same problem....... please can you send me the nvram.bin?
Click to expand...
Click to collapse
My nvram.bin is also damaged, but i can send it to you.
We need nvram.bin from a functional phone.
Have you guys solved?
unfortunately not by my side
I am having a problem with my X6 where it boots in MIUI but everything starts to crash. I tried to flash stock rom via flashtool and it seems to work but reboots back again in MIUI, its like nothing can be written in phones memory...
Is this the same problem?
How do i know if i have a NVRAM backup, maybe i did one, where would it be_
thanks
Cubot X6 imei & nvram fix
Hello,
Maybe this will help:
https://www.youtube.com/watch?v=l5WNO7i110M
https://www.youtube.com/watch?v=B40C2hoxn8U
https://www.youtube.com/watch?v=Yfn72r9ybyo
https://www.youtube.com/watch?v=BW5lSVeMC4g#t=46
http://community.ebay.com/t5/Archiv...-the-IMEI-issue-on-CUBOT-MTK6589/td-p/3068151
http://forum.xda-developers.com/showthread.php?t=2461059
http://resolvedquestion.com/questions/184-how-to-fix-invalid-imei-after-factory-reset
http://www.chinasmartphonereview.com/guide-how-to-write-imei-for-mt6575-to-mt6589-devices/
http://www.needrom.com/download/tutorial-write-imei-number-for-mtk-65xx/
http://www.chinaphonearena.com/forum/Thread-Need-restore-IMEI-but-MTK-Droid-Tools-dont-works
http://www.gizbeat.com/4315/how-to-fix-repair-invalid-imei-tutorial-on-mediatek-mtk-phones/
**Please let us know if & which fix worked for you!**
Hello
i will help u guys
i will get my cubot x6 in a few days i will upload the file a sand a link here
sqedo said:
Hi, I have problem with my phone (Cubot X6). Phoning ability is broken. My phone is now little tablet only
I haven´t much experiences with android flashing.
I think, NVRAM is corrupted and a I have no backup. I tried to change my IMEI number, but it helped once only, but it broke up in a few hours.
I am searching for someone with same model - I need the NVRAM backup / radio firmware. Of course, I will change your IMEI numbers for my own.
I will be glad, if you write me some tutorial.
If it helped me, i will give you some thankful reward (about 10 USD, PayPal).[/Q
just put a copper wire or aluminium wire into the gsm antenna and the mobile network will be back ... it worked for me and if its antenna's problem will probably work for you so try it
Click to expand...
Click to collapse
ledio999 said:
just put a copper wire or aluminium wire into the gsm antenna and the mobile network will be back ... it worked for me and if its antenna's problem will probably work for you so try it
Click to expand...
Click to collapse
Is there a guide for this anywhere?
insx said:
Is there a guide for this anywhere?
Click to expand...
Click to collapse
hi i, it has to be something like this .. .youtube .com/ watch?v=MaDs5-qPZNs[/url]
regards
Thanks.

[Q] Lost my IMEI after flashing THL t100s phone

after flashing my telephone (THL T100S) I am my IMEI number (and not backed up) lost on me phone. I've tried everything and searched on the internet and I can not find a solution. Please can someone explain to me what I need to do to fix this. I'm hopeless and I could use some help.
Sincerely,
Adam Paulus
Hi mate try this http://www.filedropper.com/changeimei just follow instructions. Good luck

[Q] Micromax A311 invalid IMEI unknown Baseband error

Guys yesterday I tried porting MIUI rom from Coolpad F1 8297w to Canvas Nitro A311.
The port was quite successful :good: , so to make it better, i restored my stock rom by TWRP.
But when the phone turned on, it showed an error "Sim card unplugged". I found that on dialing *#06# the IMEI shown was "Invalid IMEI".
Also in Settings/About Phone, the Baseband version showd "Unknown".
Now I am unable to make any calls or use internet. Please help guys.
I tried MTK Droid tools, but it shows "file adb not installed"
I re flashed stock rom by YGDP Tools several time but no solution.:crying:
Now I'm trying IMEI & SN Writer v1.5.3 and it is also not working. Maybe i do not have the database files.
Guys please help me. I know there is a solution to this, afterall, its MTK chipset. But im missing something.
Please provide some solution. Or somebody give me the baseband files of Nitro A311, maybe that will work.
Im about to port a bug less version of MIUI v6 and I will need this to work. So please guys, devs, help me.:crying:
Thank you
New update.
I have fixed the unknown baseband issue. Even the mobile repair shops were unable to do it and were asking for 200 rs.
If anyone wants help in this topic, just comment below.
about not working imei no on nitro a311
shreyash.kanaujia said:
Guys yesterday I tried porting MIUI rom from Coolpad F1 8297w to Canvas Nitro A311.
The port was quite successful :good: , so to make it better, i restored my stock rom by TWRP.
But when the phone turned on, it showed an error "Sim card unplugged". I found that on dialing *#06# the IMEI shown was "Invalid IMEI".
Also in Settings/About Phone, the Baseband version showd "Unknown".
Now I am unable to make any calls or use internet. Please help guys.
I tried MTK Droid tools, but it shows "file adb not installed"
I re flashed stock rom by YGDP Tools several time but no solution.:crying:
Now I'm trying IMEI & SN Writer v1.5.3 and it is also not working. Maybe i do not have the database files.
Guys please help me. I know there is a solution to this, afterall, its MTK chipset. But im missing something.
Please provide some solution. Or somebody give me the baseband files of Nitro A311, maybe that will work.
Im about to port a bug less version of MIUI v6 and I will need this to work. So please guys, devs, help me.:crying:
Thank you
Click to expand...
Click to collapse
please help me by giving methods to restore imei
pawanpazi said:
please help me by giving methods to restore imei
Click to expand...
Click to collapse
Use MAUI Meta 3g tools to fix your imei.
Just check youtube. You will find a video for A310. Just follow the steps.
:good:
Fixed this issue
You have to download stock rom in cpb format from needrom.com and have to flash it through ygdp tool and it will resolve your issue
http://forum.xda-developers.com/a310/help/canvas-nitro-a311-sim-detecting-t3112542
I've posted the solution... Tested & confirmed
Post #9
shreyash.kanaujia said:
New update.
I have fixed the unknown baseband issue. Even the mobile repair shops were unable to do it and were asking for 200 rs.
If anyone wants help in this topic, just comment below.
Click to expand...
Click to collapse
I want this solution. Tell me
shreyash.kanaujia said:
Guys yesterday I tried porting MIUI rom from Coolpad F1 8297w to Canvas Nitro A311.
The port was quite successful :good: , so to make it better, i restored my stock rom by TWRP.
But when the phone turned on, it showed an error "Sim card unplugged". I found that on dialing *#06# the IMEI shown was "Invalid IMEI".
Also in Settings/About Phone, the Baseband version showd "Unknown".
Now I am unable to make any calls or use internet. Please help guys.
I tried MTK Droid tools, but it shows "file adb not installed"
I re flashed stock rom by YGDP Tools several time but no solution.:crying:
Now I'm trying IMEI & SN Writer v1.5.3 and it is also not working. Maybe i do not have the database files.
Guys please help me. I know there is a solution to this, afterall, its MTK chipset. But im missing something.
Please provide some solution. Or somebody give me the baseband files of Nitro A311, maybe that will work.
Im about to port a bug less version of MIUI v6 and I will need this to work. So please guys, devs, help me.:crying:
Thank you
Click to expand...
Click to collapse
Hi
In YouTube SpaZ4 007
There is a video to fix it
100℅ wroking
Download mobile uncle tool & go to mtk engineering Mode & find GPRS that's solved write original imei & then reboot your mobile
Thank you

Categories

Resources