Related
Hi all! It's being a long time that i haven't released nothing on XDA, due to lack of time and other reasons....
Now i come back with a completely new creation, a custom kernel for I9100, designed to be fast, light and also battery friendly at the same time (difficult to do eh)!
NEW LOGO AND BANNERS BY zantekk!! THANK YOU VERY MUCH!!
The lightest kernel for I9100 ever made (only 4.3MB without additional initramfs compression!!)
ONLY FOR SAMSUNG-BASED ROMs (NO AOSP, NO Cyanogenmod, NO MIUI, NO ICS, neither samsung one)
ONLY FOR INTERNATIONAL I9100!!
ISSUES? QUESTIONS? PLEASE ASK THEM HERE: Click Here!
INFOS ON OTA UPDATER AND CONFIGURATOR : Click Here!
NOW POWERING N.E.A.R. ROM!! AVAILABLE INTO "ANDROID DEVELOPMENT" SECTION!!
CONFIGURATOR APP MADE BY NEAR TEAM (Simone201 & nrk_2k)
FREE ---->
PRO (paid) ----->
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
BEST CONFIGS FOR LATEST NEAK RELEASE:
MagicConfig (by geko95gek) = LINK
RockSolidConfig (by Stifler69) = LINK
Click to expand...
Click to collapse
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
IF YOU'RE USING MY KERNEL PLEASE ADD ONE OF THESE SMALL BANNERS INTO YOUR SIGNATURE!! THANKS IN ADVANCE!!
(by nrk_2k & zantekk)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
- Based on sammy update3 sources, updated to 2.6.35.14 (without hiding the OS bug!)
- Touch CWM Recovery 5.0.2.8 NEAK Modded
- Governors: Ondemand, Lulzactive(default), Performance, Conservative (module), Lazy (module)
- Schedulers: BFQv3-R2, Noop, SIO, VR (default)
- XZ Compression only for KERNEL (+speed, --size)
- Voodoo ScreenTuner Module (auto enabled)
- Built-In support for Voodoo Louder!
- Fully compatible with: Voodoo Louder, Voodoo ScreenTune, Tegrak's 2nd Core, Tegrak's Lulzactive app, Voltage Control, SetCPU, CWM Manager 3.0 & Tegrak OC
INITRAMFS AND MISC:
- Auto-Root (3.0.7 + latest binary)
- Auto-install of modded BLN Liblights
- Init.d Support (auto creation of init.d folder via cwm)
- Bootanimation Support (system/media & data/local)
- Touch Move Support + Touchscreen Fix (5 - thx to vitalij)
- BLN v2 support (by Creams)
- CIFS, FUSE, CUSE Support (modules)
- Logger already enabled into the kernel
CPU/GPU:
- NO OC!!!! (100-1200Mhz)
- CPU Undervolt support
- BUS Control Support (by GM)
- Complete control of freqs/voltages with Voltage Control/SetCPU
- Arighi's smooth scaling driver (thx to arighi)
- Sleep-of-Death fixes
- GPU Overclock/Undervolt (by netarchy)
- Charging current interface support (by GM - via Voltage Control)
- New ARM Mali-400 Drivers (November '11)
- Speedmod Sharpness fix (thx to hardcore)
- Brightness Curve Mod (thx to GM)
- Support for JKay Brightness settings
MEMORY & PERFORMACES:
- ARM CPU Topology + sched_mc (can be enabled via CWM, disabled by default)
- JHash 3 optimised
- SLQB Allocator (better memory management)
- Improved memory management functions
- Allow CPU Unaligned access (++performaces)
- Disabled all the big debugging (++speed, --size)
- AFTR ARM Idle Mode enabled by default (++battery)
CONNECTIVITY TWEAKS:
- Patch wakelock WiFi (by hardcore)
- Disabled debugging WiFi/BT
- New WiFi Drivers
- TCP/IP Tweaks
OPTIMISATIONS:
- Dynamic Hotplug with tweaked thresholds (with Tegrak's 2nd Core support)
- 2nd CPU Core OFF when screen is locked
- ARM_ERRATA_743622 & ARM_ERRATA_754322 & ARM_ERRATA_754327
- Upstream patches and fixes from Galaxy Note sources
- Upstream patches and fixes from Linux 3.2 mainline kernel
- GPU UI Rendering
- fuelgauge wakelocks fixed (by Entropy)
- Compiled with Linaro GCC 4.5-2012.03-dev + A lot of optimisation flags (including hard float and graphite)
- Ultra-Optimised EXT4 filesystem (from 3.2 linux kernel)
- Generally optimised code (removed useless functions and variables)
and many others...
Click to expand...
Click to collapse
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
- Modded Recovery with N.E.A.K. Menu:
1) Remove voltage settings (Voltage control)
2) Create EFS Backup (in /sdcard/near)
3) Clean init.d Folder
4) Governors Menu...
- Enable/Disable Conservative Governor
- Enable/Disable Lazy Governor
- Enable/Disable Lionheart Tweaks (only with conservative gov)
- Enable/Disable Lagfree Governor
5) Misc Options Menu...
- Enable/Disable sched_mc power functions (++battery, - performance)
- Enable/Disable AFTR Idle Mode
6) Configurator PRO Menu...
- Various cleaning for scripts
- Cleaning neak folder
- NEAK CONFIGURATOR APP (also PRO)+ NEAK OTA UPDATER!!
- NO COMPRESSION for Initramfs (ultra fast boot!!)
- Tweaked Ondemand, lulzactive and lazy governors (sleepfreq = 500Mhz)
- Tweaked BFQ, SIO and VR Schedulers for NAND devices
Click to expand...
Click to collapse
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
v1.4.2x CWM ZIP: CLICK HERE
v1.4.2x ODIN TAR: CLICK HERE
Click to expand...
Click to collapse
WANT TO HELP US? PICK THE DOWNLOADS FROM HERE! -------> Click Here!
DON'T FORGET TO SUPPORT MY WORK WITH A SMALL DONATION! LINK IN MY SIGNATURE!!
NEAK CONFIGURATOR APP FREE DOWNLOAD LINK:
NEAK CONFIGURATOR APP PRO DOWNLOAD LINK:
OLD DOWNLOADS:
v1.4.1x ZIP: CLICK HERE
v1.4.1x TAR: CLICK HERE
v1.4x ZIP: CLICK HERE
v1.4x TAR: CLICK HERE
Code:
v1.3.3 ZIP: [URL="http://code.google.com/p/neak-kernel-sgs2/downloads/detail?name=N.E.A.K-1.3.3x.zip&can=2&q="]CLICK HERE[/URL]
v1.3.3 TAR: [URL="http://code.google.com/p/neak-kernel-sgs2/downloads/detail?name=N.E.A.K-1.3.3x.tar&can=2&q="]CLICK HERE[/URL]
v1.3.2 ZIP: [URL="http://code.google.com/p/neak-kernel-sgs2/downloads/detail?name=N.E.A.K-1.3.2x.zip&can=2&q="]CLICK HERE[/URL]
v1.3.2 TAR: [URL="http://code.google.com/p/neak-kernel-sgs2/downloads/detail?name=N.E.A.K-1.3.2x.tar&can=2&q="]CLICK HERE[/URL]
v1.3x ZIP: [URL="http://code.google.com/p/neak-kernel-sgs2/downloads/detail?name=N.E.A.K-1.3x.zip&can=2&q="]CLICK HERE[/URL]
v1.3x TAR: [URL="http://code.google.com/p/neak-kernel-sgs2/downloads/detail?name=N.E.A.K-1.3x.tar&can=2&q="]CLICK HERE[/URL]
v1.2x ZIP: [URL="http://code.google.com/p/neak-kernel-sgs2/downloads/detail?name=N.E.A.K-1.2x.zip&can=2&q="]CLICK HERE[/URL]
v1.2x TAR: [URL="http://code.google.com/p/neak-kernel-sgs2/downloads/detail?name=N.E.A.K-1.2x.tar&can=2&q="]CLICK HERE[/URL]
v1.1x ZIP: [URL="http://code.google.com/p/neak-kernel-sgs2/downloads/detail?name=N.E.A.K-1.1x.zip&can=2&q="]CLICK HERE[/URL]
v1.1x TAR: [URL="http://code.google.com/p/neak-kernel-sgs2/downloads/detail?name=N.E.A.K-1.1x.tar&can=2&q="]CLICK HERE[/URL]
v1.0x ZIP: removed
v1.0x TAR: removed
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
BUG TRACKER (write here your bug reports!!): http://code.google.com/p/neak-kernel-sgs2/issues/list
KNOWN BUGS:
- Stock Camera app --> lock the screen ---> phone won't wake up, needs hard reboot
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
v1.4.2x (maintenance update):
- Removed Lagfree governor (update the app, available in a few hours)
- Modded recovery to add Configurator Pro safety options (remove scripts)
- Corrected charging currents (the only ones we can use)
- Some cleanup and small tweaks changes
- Updated Toolchain (Linaro 2012.03)
Click to expand...
Click to collapse
v1.4.1x:
- CWM 5.0.2.8 Touch Enabled (with touch buttons) - thx to TeamUtterChaos!
- Fixed CWM Backup/Restore issues (thanks to GM!!)
- Now Compatible with CWM Manager 3.0!
- keyboard: cypress: Initialize LED buttons off (by myfluxi)
- Some tweaks update (thx to pikachu01)
- Raising a bit latency multiplier of Conservative Gov
Click to expand...
Click to collapse
v1.4x:
- Brightness Curve Mod support + JKay Brightness support (thx to GM)
- Stock RAM Voltages (+ stability)
- Fine tuning for some governors (+ battery, + performance)
- Modified CIFS to use workqueue instead of slow work (by Imoseyon)
- Updated SIO Scheduler (thx to Miguel Boton)
- Prevent aliased requests from starving other I/O (for VR and BFQ) (thx to franciscofranco)
- BFS V413 scheduler support (still disabled until i fix it)
- Fixes for array.c (for BFS) from Leedroid
- Probably fixed occasional WiFi strange wakelocks
- Updated recovery with completely new UI of NEAK Options
- Mount external SD options into recovery
- Various Recovery fixes and improvements here and there
- A bit updated tweaks
- A few more changes about compression
- NEAK Configurator App full support!! (Market and YAAM available)
- AOSP Support (parallel version, still WIP)
- Updated Linaro GCC 4.5 2012.02 (dev build)
- Surely the best NEAK ever made
Code:
v1.3.3x:
- defconfig: TREE_PREEMPT_RCU enabled (+performance)
- Enabled TINY_SHMEM (+performance)
- Original Samsung SAMOLED+ panel driver (better colours)
- BFQv3-R2 scheduler updated
- Samsung E4GT EL29 update: Bluetooth HID (possible fix for BTHID)
- Various patches and fixes for CPU Driver
- Added missing Android common patches
- arm: remove stale export of 'sha_transform'
- arm: remove "optimized" SHA1 routines
- Tweaking conservative a bit more to support lower sampling_rate
- cpuidle: Remove pr_info() that spams the dmesg
- wireless: bcm4330: Disable MAX power saving mode as disabled by Samsung
- Input: evdev - fix variable initialisation
- tspdrv: Add adjustable vibrator levels
- wakelocks: Allow independent debugging of wake_lock_destroy()
- A bit updated Lionheart Tweaks
- Removed Louder Module (VL compatibility is built in)
- Auto insmod of ScreenTune module (removed option from recovery)
- Added support for N.E.A.K. OTA Updater
- Added N.E.A.K. Downloader (to download ota updater)
- Completely changed the way NEAK Options are enabled (1st patch for future neak app)
- Compiled with Linaro GCC 4.5-2012.01
- New optimisation flags (thx to the_ozyrys @ XDA)
- Various patches and improvements
- A bit updated tweaks
- Smallest NEAK Kernel ever made!!! All with the same features and performances!!
v1.3.2x (bugfix release):
- Fixed all boot issues caused by 1.3.1!
- Full CPU Unaligned access enhanced! (+performance)
v1.3.1x:
- Added support for ARM_ERRATA_754322 & ARM_ERRATA_754327
- Enabled ARM_ERRATA_754322 & ARM_ERRATA_754327
- A bit tweaked conservative gov to be a little more battery friendly
- Added support for vdd_levels (for Tegrak's Overclock) :)
- Some RAM Undervolt (1.1V)
- nohz: Fix update_ts_time_stat idle accounting
- sched_features: NO_GENTLE_FAIR_SLEEPERS
- cpuidle: Stop spamming the kernel message buffer when enabling AFTR
- Various general patches from upstream
- Unsecured Kernel (adb root in recovery) ;)
- Fixed a few CWM Issues
- Small cleanup file for issues with Thunderbolt!
- A lot of compiler warning fixes (really a lot!) (thx to myfluxi)
- Added J4FS support (for param.lfs) :D
- Now supports Hellcat's Bootlogo App (from market)
v1.3x:
- SCHED_MC disabled by default (enable it via CWM NEAK menu)
- Amazingly smooth and battery friendly as never before!!
- Removed Interactive Governor (was causing issues, will readd into 1.4)
- Added support for [B]Tegrak's 2nd Core[/B] App (Dynamic Hotplug by default)
- Re-enabled ARM_UNWIND (and removed frame pointers)
- Re-enabled [B]UNALIGNED ACCESS[/B] for CPU (++performance)
- Various CPUFREQ and cpu management fixes and improvements
- A lot of fixes for SoDs and Performance Lacks (camera bug still there)
- Disabled ARCH_POWER from sched features
- Some various patches for power functions
- ram_console: pass in a boot info string
- cpuidle: governor: menu: don't use loadavg
- ARM: 6941/1: cache: ensure MVA is cacheline aligned in flush_kern_dcache_area
- Removed more debugging (ramconsole and more)
- Enabled soft lockups and hung tasks detection
- Again smaller like 1.1x!!
- New recovery option (sched_mc enable/disable)
- Recovery auto-creates init.d folder if not found one
- Minor bugfixes for CWM (misc bugfixes)
- Removed SQLITE3 app libs optimising (was causing issues)
- More tweaks fixed and updated
- Updated Thunderbolt! CFS Tweaks
v1.2x:
- ARM CPU Topology + sched_mc enabled (++battery, boot is now slower, = performance after boot!) ;) (thx to linaro, i have included latest available)
- LulzactiveV2 Governor by Tegrak (tweaked by me, compatible with lulzactive app) :p
- New Siyah CPU Driver with Arighi's smooth freq scaling (++smoothness)
- Voodoo Louder and ScreenTuner Modules (enable via CWM NEAK, Voodoo Modules)
- init/calibrate.c: fix for critical bogoMIPS intermittent calculation failure
- init/calibrate.c: remove annoying printk
- init: skip calibration delay if previously done
- portd calibrate from 2.6.39 - by zachariasmaladroit
- binary_sysctl(): fix memory leak
- PM / Suspend: Fix ordering of calls in suspend error paths
- pmem: fix buddy free memory corruption bug
- rtc alarm: fix bad index when canceling alarms[]
- New recovery options (into neak menu): Voodoo, Lionheart
- Auto-install of modded liblights for BLN support
- Fixed some small bugs of nandroid backup of CWM
- A lot of fixes for tweaks
- More debugging removed
- A bit raised up charging current for USB (550mA)
- Fixed SDCARD Mounting issues
v1.1x:
- Lulzactive as default CPU Governor (++performace)
- Original lulzactive gov by Tegrak (with some mods by me)
- Lowered min GPU clock/voltage to save more battery
- Optimised ARM RWSEM algorithm (by Cattleprod)
- cpuidle: extend cpuidle and menu governor to handle dynamic states
- kernel:smp: Match on_each_cpu behaviour on UP to SMP
- nohz: Remove ts->inidle checks before restarting the tick
- New optimisation in EXT4 code (from linux 3.2 kernel)
- CPU Hotplug thresholds changed (saves battery and better scaling up)
- rcu: Remove rcu_needs_cpu_flush() to avoid false quiescent states
- fuse: register_filesystem() called too early
- ipv6: Fix for adding multicast route for loopback device automatically
- Enabled CGROUP_TIMER_SLACK (++performace)
- Enabled by default HRTICK and ARM POWER FUNCTIONS
- SAMOLED+ screen UNDERVOLT (3V ---> 2.5V) to save battery (= performace)
- Added LAZY Governor as a module (enable it via recovery)
- Some new mods to recovery (enable lazy gov)
- Aestetic changes in recovery (now it checks if a module is already enabled)
- Updated SU Binary
- Updated Thunderbolt 2.2.0 CFS Tweaks (thx to pikachu01)
- Removed more debugging (lighter than ever!!)
- Fixed some warnings
- More code cleanup (++speed)
- New CFLAGS optimisations
v1.0x: First internal release!
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
SOURCE CODE (2 branch, dev & master): https://github.com/simone201/neak-kernel-sgs2
Credits:
- Samsung
- Hardcore (screen patches + some scripts)
- Gokhanmoral (bus freq control + charging current + some scripts + a lot of help!)
- netarchy (GPU OC/UV + conservative patch)
- Entropy512 (some fixes + help)
- Tegrak + Vitalij (lulzactive + 2nd core + touch move + fix)
- Cattleprod (some fixes and patches)
- arkerio (beautiful banners and logo!!)
- supercurio (voodoo modules + help)
- linaro (arm topo)
- 89luca89 (GingerMod Updater)
- myfluxi (many patches!)
and many others that have helped or supported me!
by Simone201
NEAK CONFIGURATOR APP: What is that?
FREE ---->
PRO PAID ---->
The new NEAK CONFIGURATOR APP is now available into both ANDROID MARKET and YAAM (Yet Another Android Market)
THIS APP IS MADE BY SIMONE201 AND NRK_2K (member of near team)
It is a useful app to help people use the special customizable features of NEAK kernel, without going into recovery.
It now includes also the NEAK Downloader, useful to download the NEAK OTA Updater app!
The new CONFIGURATOR PRO will also allow you to have full control of every NEAK feature!!
For more infos, read this wiki: http://code.google.com/p/neak-kernel-sgs2/wiki/NEAKConfiguratorApplication
And that one for PRO: http://code.google.com/p/neak-kernel-sgs2/wiki/NEAKConfiguratorPro
There will be also a PRO app, paid on the market, still under development!
Please help us with a DONATION to sustain the costs of the android market!
Click to expand...
Click to collapse
NEAK OTA UPDATER: How it works
THE NEAK UPDATER CAN BE DOWNLOADED ONLY WITH THE NEAK CONFIGURATOR APP!! (section downloader)
Run it, and let it download the new NEAK OTA Updater app, that will be auto installed easily
Every time there will be any updates, u will be advised by the app itself, or just push CHECK NOW to see if there are updates!
Is fully based on GingerMod Updater, with some mods to be kernel compatible and to have full support for CWM5 flashing
If an there is an update, just click on DOWNLOAD and when the download is finished the app will ask to reboot to recovery now or later....
If you choose later, then you can go to the app section EXISTING and flash the downloaded zip from there!
Click to expand...
Click to collapse
NEAK OTA UPDATER: Extras
To let the EXTRAS part available, do this:
MENU BUTTON ----> Configuration ----> Extra Update Settings ----> Manage Extra Servers ----> MENU BUTTON ----> Update Featured Extra Servers
The NEAK Extra server will appear, then you will be able to update the EXTRAS part and see the new amazing extras additions for NEAK KERNEL!!
Click to expand...
Click to collapse
SOURCES FOR NEAK OTA UPDATER: https://github.com/simone201/neak-ota-updater
SOURCES FOR NEAK CONFIGURATOR FREE: https://github.com/nrk-2k/NEAK-Configurator-App
All my projects are ALWAYS open source!
Please change the title of the thread.. it states I9000 which is Galaxy S
Nice to see another kernel
prgopala said:
Please change the title of the thread.. it states I9000 which is Galaxy S
Click to expand...
Click to collapse
Thanks! Just changed!
Good to c one more kernel... Competition is getting bigger now...
Sent from my GT-I9100 using xda premium
Appreciate this wonderful kernel.
Just a quick question, you've already installed pre-defined GPU/CPU and Voltage tweaks?
Jibreil said:
Appreciate this wonderful kernel.
Just a quick question, you've already installed pre-defined GPU/CPU and Voltage tweaks?
Click to expand...
Click to collapse
Voltages and frequencies are as close to stock as possible....no aggressive settings, don't worry!
Are all configurable via Voltage Control!
CPU Voltage is set by CPU ID, and then u can change to whatever u want...
For GPU i have only lowered min default frequency and voltage to save some battery, but is rock stable!
Tempting.... veeery tempting
Let's hear som reviews
gonna try it, even if you have some hard competitors out here
buone feste!
Mr.Gamer said:
gonna try it, even if you have some hard competitors out here
buone feste!
Click to expand...
Click to collapse
Thank u man, i wait for a review soon!!
Buone feste anche a te!!
simone201 said:
Voltages and frequencies are as close to stock as possible....no aggressive settings, don't worry!
Are all configurable via Voltage Control!
CPU Voltage is set by CPU ID, and then u can change to whatever u want...
For GPU i have only lowered min default frequency and voltage to save some battery, but is rock stable!
Click to expand...
Click to collapse
Just flashed it - will report performance and other details soon. Thanks for all your hard work and efforts. This kernel will surely be amongst the top ones out there.
A thought, you can release experimental release with aggressive GPU/Voltage settings - would like to experiment with it. This way you can get great feedback from all users in assigning the best settings for your future releases.
Jibreil said:
Just flashed it - will report performance and other details soon. Thanks for all your hard work and efforts. This kernel will surely be amongst the top ones out there.
A thought, you can release experimental release with aggressive GPU/Voltage settings - would like to experiment with it. This way you can get great feedback from all users in assigning the best settings for your future releases.
Click to expand...
Click to collapse
I can try in the future, but for now i have only lowered stock voltages a bit for all the users....
welcome in S II section ! Nice to see you here. You sold your S ?
sefuleo said:
welcome in S II section ! Nice to see you here. You sold your S ?
Click to expand...
Click to collapse
Yep, since months.....i forgot the beautiful audio on I9000!
Anyway, i am back again with my new baby!!
Just a little question : why should we choose your kernel instead of an other kernel?
Sent from my GT-I9100 using xda premium
Jodelaplaya said:
Just a little question : why should we choose your kernel instead of an other kernel?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Light, fast and smooth!!!
Anyway, all depends on ur attitudes!
Just flashed it. I had siyah 2.6 for days. Was time to try a new one.
Flashed after flashing rhe ultimate cleaning script.
Will report back after a full charge cycle.
P.S. when i flashed in recovery it said i was flashing ver. 1.0.1b but you say it is 1.1. Is this correct?
Thanks for your work.
Sent from outter space using a Gremlin for delivery!
mariosraptor said:
Just flashed it. I had siyah 2.6 for days. Was time to try a new one.
Flashed after flashing rhe ultimate cleaning script.
Will report back after a full charge cycle.
P.S. when i flashed in recovery it said i was flashing ver. 1.0.1b but you say it is 1.1. Is this correct?
Thanks for your work.
Sent from outter space using a Gremlin for delivery!
Click to expand...
Click to collapse
Yep, i forgot to update the script LOL
simone201 said:
The lightest kernel for I9100 ever made (only 4.4MB without initramfs compression!!!!)
by Simone201
Click to expand...
Click to collapse
Void Kernel is also 4.4 mb or to be more precise 4.41mb
but it contains some bugs... hope this one is better!
I modified N7105 Kernels for Korea Galaxy Note2 users. (SHV-E250*)
This kernel is originally based on Perseus and RedPill.
SHV-E250* is Galaxy Note2 Korea LTE version.
recommand Stock Rom version is E250* VLJK
Really ESPECIALLY THANKS to
AndreiLux (Perseus for GS3 and Note2 Kernel Developer))
pongster and HyperDroid Dev Teams (RedPill Kernel Developer)
glewarne (NoteCore Kernel Developer) i was use at GT-N7000
gokhanmoral (Siyah Kernel Developer) he is mentor ....
And...
Korean Testers ( matcl.com, Develoid... etc.. )
-Current Version : 1.07
http://kernel.sjkoon.com/
SKTelecom (SHV-E250S) - skt folder
KoreaTelecom (SHV-E250K) - kt folder
LG Uplus (SHV-E250L) - lgfolder
if you want CM,AOSP Kernel - ~cm folder (~ is skt,kt,lg)
Its my Github
I am git starter.. sorry
http://github.com/sjkoon/SJKernel-gn2
Change log
1.07
Adjustable screen color detail (described in the English description of the sTweak Please refer).
- Mmc: built-in sd-related modifications.
- I / o: ext4 related to the latest code updates.
- Cpufreq: pegasusq Governor partially removed io wait (io improve input and output)
[Special Thanks for Andreilux] and thanks, as always, to SKjames19
1.06
- Initrd (Boeffla sound engine mount / sTweaks modify /)
Adjustable charging current (charging rate) - initrd: sTweaks
- Mdnie: mdnie modify the code
- Mali-m400: mali GPU Tweak some modifications related to the stability
- Power: power related to standby mode Gatwick apply fast (battery improve)
1.05c(2013-1-14)
- initrd fixed (rooting fix, NTFS mounting fix)
- initrd : little tweaks added (mount options, vm values)
- initrd : cpuidle setting value changed samsung official)
- initrd : now we can change cpuidle setting value in STweaks. (you need to remove /data/.sjkernel folder)
- t0-power: undervolted regulator (max77686)
- CM,AOSP version updated. (1,05)
1.04(2013-1-9)
- Exynos-mem*bug*patch changed SamsungOSRC official release.
- mmc: mshci timeout error fix.
- mmc:*MoviNAND 16GB death Bug fix (GS3, samsung official)
- mmc: irq pending problem fix (samsung official)
- Harmonized regulator max voltages.
1.03a(2013-1-8)
- STweaks config save bug fix (sjkernel folder not saved bug fixed)
1.03 (2013-1-8)
- Memory voltage/threshold/sampling rate control added
- Sensorhub driver updated
- Touchscreen driver updated
- Enabled AFTR by default
- I/O sched tweaks (run queue logic tweaks)
- fixed bug : use get_random_int() to fix entropy depleting
- pegasusq: Replace governor nr_running logic (Thanks to andreilux)
- samsung-battery: Reduce battery-monitor wakelock timeouts
[ VERY SPECIALLY THANKS TO AndreiLux!! all tweaks provided by andreilux.]
1.02b (2013-1-3)
- MMC_CAP_ERASE removed (for safety)
- USB Charge rate increased 1700. (fast charging)
1.02a (2013-1-1)
- tmu: add toggle to turn on/off thermal throttle. ( /sys/module/tmu/parameters/throttle_enabled )
- Makefile add -pipe compile option
- Revert "vfp: Makefile changed neon to vfpv3 (more smoother)" (for safety)
1.01f (12-25)
- revert "cpufreq_pegasusq: set sampling_rate to 200000 when the screen is off even if we have another sampling rate set. and set freq_step to 10"
(may be fix batter drain issue at standby)
1.01e (12-24)
- cpufreq-4x12: CPU maximum clock added 1920Mhz
- cpufreq: Booting CPU clock 1.6Ghz (Thanks to redpill)
- cma: Improved Exynos-mem fix (Thanks to Andreilux)
- pegasusq: Don't scale down inside of flexrate sub-samples (Thanks to Andreilux)
- initramfs: Fixed SuperSU removed bug when reboot after unroot
- cpufreq_pegasusq: set sampling_rate to 200000 when the screen is off even if we have another sampling rate set.
- cpufreq_pegasusq: set freq_step to 10.
- CM : exynos-mem: all security fix added
- ramfs: STweaks readahead and GPU part func add. (Thanks to Andreilux)
- ramfs: io scheduler apply fix
-mali: Add control for utilization timeout (Thanks to Andreilux)
1.0f2 (12-18)
- NTFS auto mounting (is only boot progress)
- tick-sched : recalculate sleep length each time it is requested (timer fix for deepsleep)
- tick : Fix the spurious broadcast timer ticks after resume
- s6evr02: Allow max brightness at 255
- smdk4412: s3cfb_s6e8ax0: Stop fb ****storm in kmsg
- mem: fix permissions on exynos-mem
+ CM,AOSP version WIFI Fix use to initrd script.
1.0e (12-17)
- i forgot RWSEM_XCHGADD_ALGORITHM add. now work.
1.0b~d (12-15)
- switch fmpu neon to vfpv3 (more smoother)
- LGT Ramdisk 4.1.2 updated.
- vibrator fix
- I/O and memory block upgraded to linux kernel 3.3
- STweak some fix.
- STweak gpu voltage fix
(Special Thanks to Andreilux)
- exfat support removed.
- ROW and FIOPS scheduler added.
- 1.0d2 : LGT 4.1.2 initramfs updated ( Thanks to HereiM - Matcl.com user)
- CM AOSP Support.
1.0a (12-13)
- update 4.1.2 initramfs (250K, 250S , exclude 250L) - fully support 4.1.2
1.0 beta2 (12-13)
- nice IO stability
- jRCU Removed(it caused very unstable IO (when use Torrent, heavy IO traffic)
- SLUB (SLQB removed)
0.82RC4 (12-11)
- IO elevator fix for more fast speed
- BFQ, SIO , Deadline, Zen some fix
- SLQB Memory allocator (it improve smooth)
- NTFS Support (not OTG, only storage)
0.82RC3 (12-10)
- BFQ Added.
- elevator : fix stability (revert tweaks)
- tcp.h fix - for connection stability
- mm: function fix - for io stability
- mali stability fix
- etc bug fixed.
0.82RC3 (12-10)
- BFQ Added.
- elevator : fix stability (revert tweaks)
- tcp.h fix - for connection stability
- mm: function fix - for io stability
- mali stability fix
- etc bug fixed.
- revert: sched Tweak readded.
- Dynamic Fsync Added.
- Fsync Control removed.
- initramfs fix ( root fix )
0.81a & b (12-06)
- sched Tweak readded.
- debug almost off (0.81b)
- CPU unaligned access path (0.81b)
- Gentle_fair_sleepers OFF , for stable (0.81b)
0.81beta11~13
- i remove sched tweaks.
- sio stability fix
- STweak function more added (for CPU scaling, GPU Clock)
- mDNIE Config Added (use script)
- USB connect CPU clock lock fix
- voodoo sound final fix
0.81beta10 (12-04)
- sio more tweaks for stability. (Thanks pongster, redpill)
- zen scheduler added.
0.81beta9 (12-03)
- Make the voltage interfaces step dynamic
- Mali freq control fix.
- Pegasusq Tweak for more dynamic scaling and core usage.
- init.d fix
0.81 beta8
- Increase Mali shared memory allocation
- sio, deadline scheduler modify. (kernel stability increased)
- STweak Support
- LED Fade opt Support (is not correctly work maybe?)
- other fixes (sensorhub firmware update ...)
0.81 beta7
- debugfs disabled
- mmc debug disabled
- all debug disabled
- CPU unaligned access path
- sched: don't call task_group() many times in set_task_rq()
0.81 beta6
- Voodoo sound temporary fix for Galaxy note2
- Auto Rooting added
0.81 beta5
- toolchain changed
- motor low voltage
- fix apply nohz tweak
0.81 beta4
-joe's rcu used. (Default rcu is jrcu)
-lowmemkiller sync added.
0.81 beta3
- sched.c - fix some little things.
- VR scheduler Added
0.81 beta 1~2 (2012-11-26)
beta2
- Flexible clock control readded.
beta1
- workqueue tweak
- ext4 & fifo tweak
- pegasusq little tweak
- wakelock tweak
0.8b (2012-11-24 #2)
- camera, keypress, modem, MHL driver updated.
- motor under voltage.
0.7 ver. (2012-11-20)
- lots of tweaks ext4 and I/O
- Voodoo sound tweaks added (default, not completely yet)
- Workqueue Tweaks.
- Linaro Toolchain 4.7.4 used.
- sourcecode fix some error with gcc 4.7
- jrcu: Add Joe Korty's RCU (jRCU may also be a good choice for systems with low latency requirements.)
- update LZO Compression, Improved kernel speed
- use single threaded workqueueus wakelock
- apply SCHED_FIFO to kthreadd ( Setting SCHED_FIFO will cause kthreadd to run immediately. )
- disable preemption in machine_shutdown
If You Want CM or AOSP.
you need go to AT&T Galaxy Note II Forum.
at&t version CM, AOSP is Compatible.
Wait for international n7105 version
Sent from my GT-N7105 using Tapatalk 2
kevin_diu said:
Wait for international n7105 version
Sent from my GT-N7105 using Tapatalk 2
Click to expand...
Click to collapse
i'll trying it soon. Thanks for regards.
Oh great that you released here for the Korean users, I didn't get myself to make a version for them because of the language barrier and the English speaking ones couldn't deliver me a initramfs.
Don't forget to put your GH link in the OP for others.
Oh i forgot it! Thanks!!
Sent from my SHV-E250S using xda app-developers app
OP, thanks a lot. If you need a good custom ROM to start a developing base on, PM me and I'll send you a link.
AndreiLux said:
Oh great that you released here for the Korean users, I didn't get myself to make a version for them because of the language barrier and the English speaking ones couldn't deliver me a initramfs.
Don't forget to put your GH link in the OP for others.
Click to expand...
Click to collapse
I sent you a PM asking what you needed, but maybe you didn't see it. Still, if you'd like the files, tell me exactly what you need me to grab. I'm more than happy to help you out.
Hi, can you please put a big red line in the OP saying that this is not for the International version? i know many people will miss that small line you have now and will be sh*tload of posts wondering why their phone got bricked
hannsz said:
OP, thanks a lot. If you need a good custom ROM to start a developing base on, PM me and I'll send you a link.
I sent you a PM asking what you needed, but maybe you didn't see it. Still, if you'd like the files, tell me exactly what you need me to grab. I'm more than happy to help you out.
Click to expand...
Click to collapse
I get a lot of PMs, sorry. I would prefer somebody else doing versions for the Korean phones as they have some changes in the source. Maybe some day but not for now. SJKoon proved already to be helpful by debugging the audio enhancements and neutering the call detection, I'm sure he'll do a good job on the rest of things.
always nice to see new Dev's
keep it up ur good work :good:
Great performance, as expected. Here's a few benchmarks. OP, if you ever need anything specific from the E250L phone, I'll be more than happy to help!
Nice to see this!
Will be trying your kernel out soon, mate!
Btw, does your kernel support NTFS/ExFAT for 64gb sdxc cards?
Just flashed v0.8b...
Here is my Antutu score...
Sent from my SHV-E250S using Tapatalk 2
Thanks for reports!
Some korean user report freeze at IO works.
I'll release newer beta version soon.
Sent from my SHV-E250S using xda app-developers app
Oh... i forgot here is international forum..
:'(
I added Red font effect . Thanks
Sent from my SHV-E250S using xda app-developers app
sjkoon said:
Thanks for reports!
Some korean user report freeze at IO works.
I'll release newer beta version soon.
Sent from my SHV-E250S using xda app-developers app
Click to expand...
Click to collapse
That's awesome!
Would you consider adding zen too?
Sent from my SHV-E250S using Tapatalk 2
---------- Post added at 08:30 PM ---------- Previous post was at 08:28 PM ----------
sjkoon said:
Oh... i forgot here is international forum..
:'(
I added Red font effect . Thanks
Sent from my SHV-E250S using xda app-developers app
Click to expand...
Click to collapse
Would be helpful if the mods open another Korean thread... Just saying... LOL
Sent from my SHV-E250S using Tapatalk 2
coolfire said:
That's awesome!
Would you consider adding zen too?
Sent from my SHV-E250S using Tapatalk 2
Click to expand...
Click to collapse
I planed zen scheduler add.
Maybe next release.. include that things..
Sent from my SHV-E250S using xda app-developers app
sjkoon said:
I planed zen scheduler add.
Maybe next release.. include that things..
Sent from my SHV-E250S using xda app-developers app
Click to expand...
Click to collapse
Sweeeeetttt.... And 2GHz as well! LOL
coolfire said:
Sweeeeetttt.... And 2GHz as well! LOL
Click to expand...
Click to collapse
i added zen scheduler. (test please..)
sjkoon said:
i added zen scheduler. (test please..)
Click to expand...
Click to collapse
Everything seemed fine on 0.81-beta10, except my 64GB microsdxc could no longer be detected - it kept showing as an empty extsdcard folder which was empty and on every reboot, there is always a prompt that i can safely remove my card. I also tried mounting the card from within settings-storage but not successful...
Back to 0.8b for now...
Sent from my SHV-E250S using Tapatalk 2
GUYVER KERNEL
This kernel is ONLY for SM-G901F TouchWiz LollipopYou will void your warranty after flashing this ROM (knox @ 0x1)I'am not responsible of any damage caused to your device after flashing this KERNEL
Features:
Code:
- Based on the last Samsung source (OE2)
- Compiled with the last @Christopher83 LINARO 4.9.4 2015.06 optimized for Cortex A15 - build 14/07/2015
- Init.d support
- CRC Disabled
- Android logger disabled
- Kernel logger disabled
- Busybox
- SELinux set to "Permissive"
- Disabled restrict rooting
- Added Simple GPU Algorithm
- CPU undervolt support
- Fast charge
- Dynamic Fsync Control
- IntelliPlug
- Intelli_Thermal
- KCAL
- PowerSuspend
- Google Services wakelock fix
DOWNLOAD:
VERSION 0.9
VERSION 0.8(revision 2)
Credits:
- Alcolawl
- Alucard_24
- AndroidGX
- arter97
- bbedward
- faux123
- flar2
- franciscofranco
- javilonas
- mrg666
- neobuddy89
- savoca
- showp1984
- Tkkg1994
- TripNRaVeR
- twistedumbrella
- ZaneZam
XDAevDB Information
GUYVER Kernel, Kernel for the Samsung Galaxy S 5 Plus ( SM-G901F )
Contributors
MEGAX91
Source
Version Information
Status: Stable
Current Stable Version: 0.8
Stable Release Date: 2015-11-25
How to Flash:
1. Restart to recovery
2. Flash attached .zip file.
3. Restart to system
Changelog :
v0.9 :
- Base on OK2 Source
- added governors ( pegasus - impulse - intellimm - smartmax - racoon_city )
- Scheduler patches
- added o.c
v0.8:
- removed intelli_plug
- added intelli_hotplug v5.1
- added bricked_hotplug ( The 'MSM Mp-Decision' in kernel adiutor is the bricked hotplug )
- added msm_hotplug
- added vibration control
- added governors ( bioshock - alucard , ... )
v0.7:
- -o3 OPTIMIZATION
- removed o.c
- added Sioplus & tripndroid i/o schedulers
- reduced wlan wakelocks
- added Sound Control: 3.6
*This is not working properly in Kernel Adiutor for now use FauxSound Audio/Sound Control*
v0.6:
- Compiled with the SaberMod 6.0.x Toolchain tuned for Cortex-A15 devices with NEON-vfpv4
- updated intelliplug to v4
- updated Intellithermal to v3
v0.5:
- Patched to Linux 3.10.93
- GOVERNORS ( ondemand Plus - Interactive Pro - Conservativex - yankactive - barry_allen - Intelliactive , .... )
- removed Sound Control: 3.6
- removed lcd notifier
- added Alucard Hotplug
- added Stereo Call Recording Support
v0.4:
added lcd notifier
added msm_zen_decision
added hwgenerator randomness
added Adreno idler
added e/frandom for reseeding
added zzmoove
v0.3 :
- added CPU O.C To 2.7GHz
- aded LED fading control
- added frandom support
- added Sound Control: 3.6
I'll test it tomorrow!
Sent from my SM-T325
Test it since yesterday.
Very good at the wlan-wow wakelock. It reduced it to 15min of 8h deepsleep.
(45min at SimpleGX 1.2.3)
53000 at Antutu.
Very fine.
Thanks for creating a kernel for our (exotic) device.
i'm already working on version 0.3 , it include O.C ( both CPU & GPU ) / frandom support / New random generator ( more I/O perfomance ) / LED controll / ....
Stay Positive:
https://en.wikipedia.org/wiki/GNU_General_Public_License
https://github.com/MEGAX91/GUYVER-KERNEL/commits/master
DienoX said:
Stay Positive:
https://en.wikipedia.org/wiki/GNU_General_Public_License
https://github.com/MEGAX91/GUYVER-KERNEL/commits/master
Click to expand...
Click to collapse
thanks for the tip.
God job guy!!
0,2%/h
I love u
And I am not in your credits? As I helped you so much? Not really nice of you
somehow cant download it from the link...404 not found...hmmm?
Tkkg1994 said:
And I am not in your credits? As I helped you so much? Not really nice of you
Click to expand...
Click to collapse
man i think i got amnesia!
i hope you forgive me.
i'm disappointed with FauxSound output quality! viper4android is way better.
for some reason i cant O.C CPU more than 2.7GHz!!!
MEGAX91 said:
man i think i got amnesia!
i hope you forgive me.
Click to expand...
Click to collapse
Of course I can
MEGAX91 said:
i'm disappointed with FauxSound output quality! viper4android is way better.
for some reason i cant O.C CPU more than 2.7GHz!!!
Click to expand...
Click to collapse
For your sound problem, there is boeffla sound control. And Lord Boeffla has the galaxy s5 so I think it is way more optimised for our device than faux
Edit: Here you can find it. But I have to say that this is for 3.4.y kernels and not for 3.10, but you will see
Tkkg1994 said:
Of course I can
For your sound problem, there is boeffla sound control. And Lord Boeffla has the galaxy s5 so I think it is way more optimised for our device than faux
Edit: Here you can find it. But I have to say that this is for 3.4.y kernels and not for 3.10, but you will see
Click to expand...
Click to collapse
thanks man.( you were totally right about github )
about 1 hr ago i tested the boeffla sound , it didnt work with 3.10.X ( i also tested the rem sound but i didn't noticed any improvement compared to stock )
i can easily O.C CPU to 2.7 but i cant O.C GPU !
https://github.com/MEGAX91/GUYVER-KERNEL/blob/master/arch/arm/boot/dts/qcom/apq8084-gpu.dtsi
MEGAX91 said:
thanks man.( you were totally right about github )
about 1 hr ago i tested the boeffla sound , it didnt work with 3.10.X ( i also tested the rem sound but i didn't noticed any improvement compared to stock )
i can easily O.C CPU to 2.7 but i cant O.C GPU !
https://github.com/MEGAX91/GUYVER-KERNEL/blob/master/arch/arm/boot/dts/qcom/apq8084-gpu.dtsi
Click to expand...
Click to collapse
Github is a must for kernels, GNU license...
If you want to OC the kernel even more, go and look here.
About GPU I haven't had a look until now, if I find something, I will tell you
If you got questions, you know where I am :good:
I tried to install it but i get bootloop. I have to say im on simplegx and i can't install lonas anymore as well. Only simplegx kernels work for me
I tried the lonas 1.0 - 1.3 many times. Always bootloop or freeze. SimpleGX worked everytime. Installed the GUYVER and it worked too.
@Cissiboy
Try to install lonas, then reinstall SimpleGX 1.2.3, then try Guyver's.
Good luck
Android2003 said:
I tried the lonas 1.0 - 1.3 many times. Always bootloop or freeze. SimpleGX worked everytime. Installed the GUYVER and it worked too.
@Cissiboy
Try to install lonas, then reinstall SimpleGX 1.2.3, then try Guyver's.
Good luck
Click to expand...
Click to collapse
thanks for the suggestion but Im not in a position in which i can try this at the moment
Luckily I have a pretty stable, longlasting and greatly performing rom nevertheless
Tkkg1994 said:
For your sound problem, there is boeffla sound control. And Lord Boeffla has the galaxy s5 so I think it is way more optimised for our device than faux
Click to expand...
Click to collapse
I tried already to port it into my kernel, but unfortunately, there is no app compatible to control it and even with some echo scripts in init.d it crashes if any other value different than default (off then).
So I concluded that boeffla sound for S5 is not compatible for S5 Plus :good:
Moreover boeffla sound for S5 is not interesting as much because you can only control speaker volume output, unlike on the S3 : a real hardware equalizer + mic control + some great features etc.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MeGaByTe KernelAttention
/*
I'm not a developer, im taking effort to put more choices of kernel for our community.
This kernel is tweaked for my own taste.
Please do not request for more features because i want to ensure the stability of the kernel first.
And thank you for using this kernel.
*/
Disclaimer
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this Kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features
- Compiled with latest Built with latest custom Uber 5.2
- Updated Kernel Base With CM
- Bioshock governer
- Mako hotplug
- MSM hotplug
- O3 flag
- graphite flag
- dev/frandom
- fiops IO schedulers
- vibration strength control ( sysfs set to /sys/vibrator/pwmvalue for compatibility with Trickster )
- Bricked hotplug
- Init.d Colour Calibration at bootup thanks to @Gustavo_s
- Faux Sound Control
- ZEN, SIO, FIOPS, VR IO schedulers
- Intelli Demand governor
- intelli Active governor
- Intelli Hotplug
- Intelli Thermal V2
- yankactive governor
- impluse governor
- smartmax governer
- adreno_idler driver
- enable zswap,frontswap ,vnswap
- usb fast charge added
- cpu voltage control added
- merged f2fs from motorola
- added Fsync from hTc
- added simple governer for gpu
- Enabled all kind Advance TCP
- MSM_Limiter by @neobuddy89 - More like a Swiss army knife! adds Per-Core Functionality!
- Linux 3.14 rc1 lockless ZRAM backported!
- crypto lib optimization
- ARM Cortex-A15 specific optimization
- exFAT support (for OTG)
- patches to reduce kernel latencies for network, fs
- selinux update
- VFAT, MM tweaks
- over 350+ patches!
- added core scheduler update
- backported 3.12+ kernel scheduler features
- fixed old cpufreq bug
- added LZ4 compression (faster than LZO)
- added various minor kernel bug fixes from CAF/kernel.org
- more accurate load calculations (better battery/performance)
- added mutex optimization (better multi-tasking)
- scheduler optimization (smoother multi-tasking)
- SELinux optimization (faster SELinux!)
- enabled XZ compression (reduce kernel size)
- UV control
- ARM unaligned access enabled
- updated LZO algorithms (used by many including crypto, zram/zcache etc)
- updated libraries with optimized kernel functions
- built-in snakecharmer (cpu limit from boot)
- optimized KSM
- oom updated to linux 3.14+
- lowmemorykiller optimization
- core sched optimization
- kswapd patch from mainline
- tuned kernel page_alloc for better multitasking
Pls Read This before flashing:
You need ROM's default kernel before flashing this as this kernel makes use of AnyKernel 2 by @osm0sis. Make sure you have it otherwise clean flash the kernel with the rom to avoid any issues.(At least dirty flash rom+kernel) Credits to @attack11 for some part of install script.Read FAQ's and changelogs in 2nd post. THIS KERNEL COMES FINE TUNED OUT OF THE BOX.
How to Flash:
1. Download the kernel and place it into your phone storage
2. Reboot into recovery
3. Install the kernel
4. (optional) Wipe Dalvik/ART Cache and Cache partitions
5. Reboot and enjoy!
PLS DON'T MIRROR THE LINKS
Recommended app:
Kernel Adiutor
I would like to say thanks to @Gustavo_s I used his kernel source as my base Thanks Mate @faux123 @RenderBroken @arter97
@franciscofranco @hurtsky for his commits
@Flashhhh @DC07 @zwliew @neobuddy89 @smartAgent47 for poster and many more ..last but not the least Cyanogen Team
XDA:DevDB Information
[Kernel][SM-4.9][CM/AOSP][5.1.X] MeGaBYTe_Kernel_r1 [Colour Calibration] [16/10/15], Kernel for the Moto X
Contributors
Megatron007
Source Code: https://github.com/Megatron007/ghost
Kernel Special Features:
Version Information
Status: Beta
Created 2015-10-16
Last Updated 2015-10-16
Download:
https://renderserver.net/browse?path=Megatron007/Megabyte/ghost
Looking for changelogs??
https://github.com/Megatron007/ghost/commits/mega-new Here they are!!!
F.A.Q. - Read this before complaining!
1. My phone exploded, HELP!
A: I don't answer to problems without a log. The log file is in /proc/last_kmsg. Paste it on pastie.org and link it on your post. Logcats are useless for Kernel purposes, don't bother posting them.
2. This kernel works on Y or X rom?
A: Works on all CM12/12.1 and AOSP roms. Not for stock roms!!
3. OMG BATTERY SUCKZ, ITZ DEAD IN 45 MINUTES, HELP!
A: As you can imagine I don't build kernels to decrease battery life. All the battery life problems come from your apps, either Facebook, or Maps, or some Location Service being enabled etc etc. Check your damn wakelocks and fix them, the kernel is not responsible for them.
4. How do I flash this?
A: Read the OP, theres a reason why I added instructions on it.
5. What is a data loss? Did I just had one?
A: Data loss is simply having the connection cut for X periods of time, usually few seconds. Grey bars means the device is not connected to Google services for some weird reason, but you'll still have internet connection.
6. OP is arrogant, I'm gonna call the Internet Police?
A: Deal with it.
Changelogs -
7/11/15
MeGaByTe_Kernel_r4
-Fixed Colour calibration reset issue
- Compiled with Lz4 compression and thanks to @tycoo for lz4 updates
29/10/15
MeGaByTe_Kernel_r3(Based on faux kernel)
- MSM_Limiter by @neobuddy89 - More like a Swiss army knife! adds Per-Core Functionality!
- Linux 3.14 rc1 lockless ZRAM backported!
- crypto lib optimization
- ARM Cortex-A15 specific optimization
- exFAT support (for OTG)
- patches to reduce kernel latencies for network, fs
- selinux update
- VFAT, MM tweaks
- over 350+ patches!
- added core scheduler update
- backported 3.12+ kernel scheduler features
- fixed old cpufreq bug
- added LZ4 compression (faster than LZO)
- added various minor kernel bug fixes from CAF/kernel.org
- more accurate load calculations (better battery/performance)
- added mutex optimization (better multi-tasking)
- scheduler optimization (smoother multi-tasking)
- SELinux optimization (faster SELinux!)
- enabled XZ compression (reduce kernel size)
- UV control
- ARM unaligned access enabled
- updated LZO algorithms (used by many including crypto, zram/zcache etc)
- updated libraries with optimized kernel functions
- built-in snakecharmer (cpu limit from boot)
- optimized KSM
- oom updated to linux 3.14+
- lowmemorykiller optimization
- core sched optimization
- kswapd patch from mainline
- tuned kernel page_alloc for better multitasking
24/10/15
MeGaByTe_Kernel_r2
- Compiled using Uber 5.2
- Updated base from CM
- Bioshock governer
- Mako hotplug
- MSM hotplug
- O3 flag
- graphite flag
- dev/frandom
- fiops IO schedulers
- vibration strength control ( sysfs set to /sys/vibrator/pwmvalue for compatibility with Trickster )
- Bricked hotplug
16/10/15
MeGaByTe_Kernel_r1
- Compiled with latest Built with latest custom Sabermod 4.9
- Init.d Colour Calibration at bootup thanks to @Gustavo_s
- Faux Sound Control
- ZEN, SIO, FIOPS, VR IO schedulers
- Intelli Demand governor
- intelli Active governor
- Intelli Hotplug
- Intelli Thermal V2
- yankactive governor
- impluse governor
- smartmax governer
- adreno_idler driver
- enable zswap,frontswap ,vnswap
- touch improved
- usb fast charge added
- cpu voltage control added
- merged f2fs from motorola
- added Fsync from hTc
- added simple governer for gpu
- Enabled all kind Advance TCP
Cant wait to dig through your source and check it out! Looks good so far!. Keep it up.
RenderBroken said:
Cant wait to dig through your source and check it out! Looks good so far!. Keep it up.
Click to expand...
Click to collapse
Thanks a lot Need to Improve this kernel more and more in Future Releases
Can you make one for stock rom too if possible?:fingers-crossed:
DaRkRhiNe said:
Can you make one for stock rom too if possible?:fingers-crossed:
Click to expand...
Click to collapse
I dont use stock rom , So i dont
Download and flash, thanks @Megatron007 suport of ghost
@Megatron007 you rock bro'!
Thanks for the effort! I'm gonna probe right now!
The selinux is permissive?
julianenciso93 said:
The selinux is permissive?
Click to expand...
Click to collapse
Enforcing
@Megatron007 excuseme but i see in kernel adiutor with your RR ROM that the kernel doesn't have any customization that you recommended in you BLISSPOP ROM... that's ok? :/
Thanks for your support!
CsR0501 said:
@Megatron007 excuseme but i see in kernel adiutor with your RR ROM that the kernel doesn't have any customization that you recommended in you BLISSPOP ROM... that's ok? :/
Thanks for your support!
Click to expand...
Click to collapse
can u ellobrate it ? i didnt get it
@Megatron007 this is awesome kernel!! The colour calibration is perfect to screen burn-in, really really thanks bro is very smooth and battery is good!!
PD: i not touch nothing in kernel auditor
Megatron007 said:
can u ellobrate it ? i didnt get it
Click to expand...
Click to collapse
Excuse me... I don't speak (write) english very well
You commented a type of configuration for kernel in your BLISSPOP ROM thread (http://forum.xda-developers.com/showpost.php?p=63212087&postcount=41)... but in MeGaByTe kernel i don't see that configuration... Is this ok?
CsR0501 said:
Excuse me... I don't speak (write) english very well
You commented a type of configuration for kernel in your BLISSPOP ROM thread (http://forum.xda-developers.com/showpost.php?p=63212087&postcount=41)... but in MeGaByTe kernel i don't see that configuration... Is this ok?
Click to expand...
Click to collapse
Its there in this kernel too + extra governers and i/o
CsR0501 said:
Excuse me... I don't speak (write) english very well
You commented a type of configuration for kernel in your BLISSPOP ROM thread (http://forum.xda-developers.com/showpost.php?p=63212087&postcount=41)... but in MeGaByTe kernel i don't see that configuration... Is this ok?
Click to expand...
Click to collapse
kernel settings are already set as default, I have not touched anything and everything is going great
julianenciso93 said:
kernel settings are already set as default, I have not touched anything and everything is going great
Click to expand...
Click to collapse
After flashing i don't see any configuration in kernel adiutor... do you?
CsR0501 said:
After flashing i don't see any configuration in kernel adiutor... do you?
Click to expand...
Click to collapse
Send me ss of it
Megatron007 said:
Send me ss of it
Click to expand...
Click to collapse
Same happened to me. Re-flashed Blisspop ROM + Kernel as per OP instructions. There is nothing new within kernel auditor options, in fact very basic options and no color calibration script under init.d. TIA
Sent from my Moto XT1053 powered by Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
DISCLAIMER!!
I am not responsible in any way for anything that can be happen to your device when you flashing my kernels.You do so at your own risk!
If you get bootloop click here
Summary CrazySuperKernel is a powerfull kernel with a lot super features!
If you got any bug use the report bug tab or press HERE and upload the log,WITHOUT LOGS THERE IS NO BUG!
I m not a magician and i havn't got the device to do it on my own without spend your time.
INDEX
POST 1
-Imprtant info
-Report bug with Logs
-Features
-Battery life tips
-Dowload links
-Donators
-Credits
POST 2
-Recommended kernel tweaker tools
-Changelogs
POST 3
-Bootloop fix
POST 4
-Zzmoove profiles
POST 5
-Eta info
Features
- OTA Updates from Kernel Adiutor app
- Anykernel2 zip For maximum compatibility with all ROMs, CrazySuperKernel uses your existing ramdisk (Do NOT flash this over other custom kernels!You should only flash CrazySuperKernel over the kernel that came with your ROM!!)
- Synapse Support - Complete Kernel Control!! (UKM included!Just need to instal Synapse app from Play Store)
- Compiled with DF 4.9 Toolchain [latest update]
- Kernel runs with SELinux enforcing by default
- init.d support
- insecure kernel (adb has root privileges)
- Faux sound control
- Frandom support
- gpu governor selection support
- CPU governors : interactive, impulse, ondemand, smartmax, zzmoove,ondemandplus,pegasusq,nightmare,conservative,lionheart,powersave,userspace,yankactive,smartmax_eps,intellidemand,intelliactive
- IO schedulers :bfq-tripndroid-cfq-noop-deadline-fiops-row-sio-zen-vr-fifo
- TCP congestion controls: cubic-bic-westwood-htcp-highspeed-hybla-reno-bic-hybla-vegas-lp-yeah-illinois-scalable
- Gpu governors :msm-adreno-tz,simple_ondemand,powersave,performance,userspace,cpubw_hwmon,msm_cpufreq
- Kcal v2 with inverted colours
- Intelli thermal v2
- Bricked Hotplug
- Adreno idler
- Fast charge support (by yank555)
- LED extended control (by yank555)
- Prevent wakelock when ambiend display disabled(misc control tab)
- Wake And Sleep Functions
- CPU Voltage Control
- Slimbus overclock
- Enabled Arch Power
- CRC Check Disabled
- Gentle Fair Sleepers (Disabled by default)
- Android Logging switcher
- Enabled All Suspend and Idle Modes
- Power Suspend Mode/State
- Dynamic filesystem read-ahead
- QuickWakeUP
- Dynamic FSync 2.0
- Fixed recent SafetyNet failure,you can use Android Pay again (thx Sultanxda)
- tcp congestion changed to Westwood
- A lot improvments
- A lot fixes
Battery life improve tips:
Xposed needed(not for all steps)
-Amplify
-AppOpsXposed(disable wakelocks of Google apps)
-Greenifywith root mode and xposed better and aggresive doze
-Find the best hotplug for you
-The best governor for you
- Bfq sheduler recomended
-Adreno idler on
-Lower Gpu as low as you can(if not use it much)
-underclock max cpu close to 1.5ghz for beast battery life and 1.7 to 1.9 for better smoothness(lower cpu freq=lower temps so better exp)
-disable some boosts like touchboost(no big deal)
-disable ambient display
-use dark themes
-more coming soon
Find this thread helpful? Hit the Thanks button!
The speed of future releases will be based on thanks. 39k views, 400 downloads and only 19 thanks... I won't be rushing anything.
Feeling extra generous and wanna help me more? Click my name at the top of any post and hit donate or click here the donation button
Download Link [AnyKernel]:https://www.androidfilehost.com/?fid=673368273298915721
Installation guide
Do NOT flash this over other custom kernels!
You should only flash CrazySuperKernel over the kernel that came with your ROM!!
- Download Kernel from this thread
- Flash it with Recovery
[Wipe cache and Dalvik cache recommended]
- Then Reboot
Enjoy the CrazySuperKernel !!!!
Donators
DirkStorck
SilentEYE
Credits
- Thx the devs where created the features where included in kernel
- Thx TioCareca for the tests
- Thx CrazyGamerGR yeh me
XDA:DevDB Information
CrazySuperKernel, Kernel for the Samsung Galaxy S 5
Contributors
CrazyGamerGR
Source Code CrazySuperKernel: https://github.com/CrazyGamerGR/CrazySuperKernel-CM13-KLTE
Source code CrazySuperKernel-AnyKernel2:https://github.com/CrazyGamerGR/CrazySuperKernel-KLTE-anykernel2
Kernel Special Features: check the feature list
Version Information
Status: Testing
Current Stable Version: Weekly
Stable Release Date: 2016-12-09
Current Beta Version: Daily
Beta Release Date: 2016-12-09
Created 2016-04-04
Last Updated 2016-12-09
FAQ
Recommended apps : Synapse Support - Complete Kernel Control (need download the app from Play Store) & Kernel Adiutor (with kernel ota updates!) + Kernel Adiutor mod with much more features builded from source by TioCareca (Download Link: https://mega.nz/#!1ZVDQIgL!bHBvHC9AYMCDM4h7w50rjGzFnsiZfxtYUPOw5gbvecM)
changelogs
v1/02-04-16
- compiling bugs and bootloops fix
v2/04-04-16
- initial release
v3/05-04-16
- fixes
v4/14-04-16
- fixes
v5/07-05-16
- last fixes to bootup
v6/10-05-16
- builded from scratch and clean up my features
- updated ramdisk (10-05-16)
- added adreno idler
v7/12-05-16
- upstream updates from cyanogenmod
- update ramdisk (12-05-06)
- added intelli thermal v2
- added cpu oc
- added gpu oc
- added gpu idle step 27mhz
v8/12-05-16
- removed cpu oc
- removed gup oc
- removed gpu idle step 27mhz
v9/17-05-16
- upstream updates from cyanogenmod
- update cm/rr ramdisks (16-05-06/15-05-16)
- added cpu oc
- added gup oc
- added gpu idle step 27mhz
v10/23-05-16
- update cm/rr ramdisks (22-05-06/21-05-16)
- removed cpu oc
- removed gup oc
- removed gpu idle step 27mhz
- added many features
- added many govs
- added many scheds
- added tcp controllers
- added many hotplugs
- added many under the hood tweaks
- added wake/sleep functions
- added cpu voltage control
v11/25-05-16
- upstream updates from cyanogenmod
- update cm/rr ramdisks (24-05-06/21-05-16)
- update toolchain to UBERTC 4.9
- ota updates from KernelAdiutor app
v12/28-05-16
- Anykernel zip( need to instal your rom first to have the latest ramdisk!)
- removed franco sound
- added faux sound
- added dynamic filesystem read-ahead
- added tripndroid scheduler
v1.0/28-05-16
- Synapse Support - Complete Kernel Control!!
- upstream updates from cyanogenmod
- Anykernel update
- removed 268mhz cpu underclock step
- clean up some files
v2.0/15-06-16
- upstream updates from cyanogenmod
- Anykernel update
- clean up some files
v3.0/25-06-16
- upstream updates from cyanogenmod
- bug fixes
v4.0/08-07-16
- upstream updates from cyanogenmod
- many bug fixes
- Anykernel update
v5.0/15-07-16
- upstream updates from cyanogenmod
- Anykernel update
v6.0/19-07-16
- upstream updates from cyanogenmod
- Anykernel update
v7.0/25-08-16
- upstream updates from cyanogenmod
- Anykernel update
v8.0/25-09-16
- upstream updates from cyanogenmod
- Anykernel update
- changed to DF 4.9 Toolchain
v9.0/04-11-16
- upstream updates from cyanogenmod
- Anykernel update
- deleted many hotplugs
v10.0/10-11-16
- upstream updates from cyanogenmod
- Anykernel update
- removed slim governor
- removed intellimm governor
v11.0/10-11-16
- removed many unstable governors
- clean up some files
- bug fixes
v12.0/11-11-16
- fixed recent SafetyNet failure,you can use Android Pay again (thx Sultanxda)
- Anykernel update
- Anykernel clean up
v13.0/13-11-16
- many fixes under the hood
v14.0/14-11-16
- big anykernel update
-removed uksm (battery drain fixed)
-insecure kernel (adb has root privileges)
-init.d support
-simple ondemand gpu governor update
-msm adreno tz governor update
-tap2wake update
-kcal update
-touch boost update
-cpu boost update
-touchkey control update
-conservative gpu gov removed
-some fixes
-some useless features removed
v15.0/18-11-16
- upstream updates from cyanogenmod
v16.0/9-12-16
- anykernel big updates
- upstream updates from cyanogenmod
- disabled completly mpdecision
- enabled updated bricked hotplug
- script with many set up for kernel features included in anykernel zip
- added led tab in synapse
- fixed many synapse bugs
- faux sound updated
- deleted unstable hotplugs
- fixed many bugs
- battery improve
- performance improve
- some feature fixed
- many improvments under the hood
How to fix if you get bootloop!
If you get bootloop or bootloop before samsung screen press volume up+down+power button until device vibrate and fast press power+volume up and device will be boot in recovery,instal your rom(dirty instal not need clean instal) and everything will be good^^.
If u use zzmove governor disable all the hotplugs coz it use its own hotplug as anyone knows.
Zzmove profiles
1 ) Default -> will set governor defaults -
2 )ybat -> Yank Battery -> a very good battery/performance balanced setting - DEV-NOTE: highly recommended! -
3 )ybatext-> Yank Battery Extreme -> like yank battery but focus on battery saving -
4 )zzbat-> ZaneZam Battery -> a more 'harsh' setting strictly focused on battery saving -
- DEV-NOTE: might give some lags! -
5 )zzbatp -> ZaneZam Battery Plus -> NEW! reworked faster battery setting -
- DEV-NOTE: recommended too!
6 )zzopt -> ZaneZam Optimized -> balanced setting with no focus in any direction -
- DEV-NOTE: relict from back in the days, even though some people still like it! -
7 )zzmod -> ZaneZam Moderate -> NEW! setting based on 'zzopt' which has mainly (but not strictly only!) 2 cores online -
8 )zzperf -> ZaneZam Performance -> all you can get from zzmoove in terms of performance but still has the fast -
- down scaling/hotplugging behaving -
9 )zzinz-> ZaneZam InZane -> NEW! based on performance with new insane scaling active. a new experience! -
10 )zzgame-> ZaneZam Gaming -> NEW! based on performance with scaling block enabled to avoid cpu overheating during gameplay -
Eta info
Nightlies : when cm got new updates
Stable builds: when i have enough free time and some new features
Cm source commit history : https://github.com/CyanogenMod/android_kernel_samsung_klte/commits/cm-13.0
CrazySuperKernel commit history : https://github.com/FrancescoCG/CrazySuperKernel-CM13-KLTE/commits/master
If there are updated commits in cm sources there will be a new nightly very soon
For the stable and big updates i ll say when i ll start them
OOOOOOH a new post hahaha. IM ready to try it! I will be the first one! LOL . will download it right now and will be back in 7 to 10 minutes. If bootloop, in less than that. Wait. it says LP instead of MM. Is it for both?
Removed the link?
Sent from my SM-G900F using Tapatalk
joseguillen1994 said:
OOOOOOH a new post hahaha. IM ready to try it! I will be the first one! LOL . will download it right now and will be back in 7 to 10 minutes. If bootloop, in less than that. Wait. it says LP instead of MM. Is it for both?
Click to expand...
Click to collapse
Only main download link work ,mirrors will be come for weekly builds only so androidfilehost include the new builds.But Basketbuild mirror download zip is up too now^^.
Sent from my Nexus 5X using XDA-Developers mobile app
!crazy said:
Removed the link?
Sent from my SM-G900F using Tapatalk
Click to expand...
Click to collapse
No,now its up in mirror too you can download from androidfilehost or basketbuild.
Sent from my Nexus 5X using XDA-Developers mobile app
CrazyGamerGR said:
Only main download link work ,mirrors will be come for weekly builds only so androidfilehost include the new builds.But Basketbuild mirror download zip is up too now^^.
Sent from my Nexus 5X using XDA-Developers mobile app
Click to expand...
Click to collapse
aaaaaaaaaaaaaaaaaaaaaaaaaaaaand EPIC FAIL! lol Bootloop.. If VRtoxin where working appropriately i could use that rom and boeffla kernel made for that rom. But instead here i am using Resurrection Remix, with a kernel that is draining my battery life like crazy ! I have tried every single governor and the best one for this rom is powersaver, which is aweful since everthing becomes as slow as a snail. however, i havent try this kernel in other roms. As soon as blisspop add more futures, or AICP, or AOKP, then i will flash them and add this kernel to see if it works
joseguillen1994 said:
aaaaaaaaaaaaaaaaaaaaaaaaaaaaand EPIC FAIL! lol Bootloop.. If VRtoxin where working appropriately i could use that rom and boeffla kernel made for that rom. But instead here i am using Resurrection Remix, with a kernel that is draining my battery life like crazy ! I have tried every single governor and the best one for this rom is powersaver, which is aweful since everthing becomes as slow as a snail. however, i havent try this kernel in other roms. As soon as blisspop add more futures, or AICP, or AOKP, then i will flash them and add this kernel to see if it works
Click to expand...
Click to collapse
For some ppl working this kernel,what variant have you got? g900f,g900m?
Sent from my Nexus 5X using XDA-Developers mobile app
CrazyGamerGR said:
For some ppl working this kernel,what variant have you got? g900f,g900m?
Sent from my Nexus 5X using XDA-Developers mobile app
Click to expand...
Click to collapse
seems like tmobiles version (g900t) is being stubborn lol
joseguillen1994 said:
seems like tmobiles version (g900t) is being stubborn lol
Click to expand...
Click to collapse
Its different variant i belive not much in source but ramdisk for sure.
Sent from my Nexus 5X using XDA-Developers mobile app
The rom boot for g900f users yeh??
Sent from my Nexus 5X using XDA-Developers mobile app
CrazyGamerGR said:
The rom boot for g900f users yeh??
Sent from my Nexus 5X using XDA-Developers mobile app
Click to expand...
Click to collapse
For me still didn't boot
dawid0089 said:
For me still didn't boot
Click to expand...
Click to collapse
I ll release a new build with not so much features at start.
Sent from my Nexus 5X using XDA-Developers mobile app
I ll add one by one feature from clean and with gcc 4.7 to be everything clean.
Sent from my Nexus 5X using XDA-Developers mobile app
dawid0089 said:
For me still didn't boot
Click to expand...
Click to collapse
You use xposed?
Sent from my Nexus 5X using XDA-Developers mobile app
new build is here with 268mhz underclock step and gcc4.7 to check if boot.
download here: https://www.androidfilehost.com/?fid=24459283995313757
test build with 4.8 gcc is here https://www.androidfilehost.com/?fid=24459283995314243