Hi all,
EDIT
Thanks to techdudester on the second page, getting rid of the malware is now even easier!
Just flash the image he found here with the following procedure and you're good to go!
Instruction:
1. Flash the new ROM.
a. Get the ROM here . (Use this ROM only if you have a Venstar V140D tablet!)
b. Follow the linked tutorial to install the flash software and flash the new ROM on your device with: Phoenix Suit.
Voila, ready!
Enjoy your malware free tablet!
Tips and tricks. (or something...)
Get adb working (needed for all the other tricks down below):
1. Download the Google development tools (sdk) here and install them on your computer. I assume you have windows 7 installed during the rest of this tutorial.
2. Connect your device to your computer and make sure it is installed correctly.
a. Connect your device while its powered on via USB to your pc.
b. Go to Start, right click "My Computer" and select "Properties". Click "Device Manager".
c. Right click the Android device with the exclamation mark and select "Update Driver Software...".
d. Select "Browse my computer for driver software".
e. Select "Let me pick from a list of device drivers on my computer".
f. Keep "Show All Devices" selected and click Next.
g. Click "Have Disk..." and click "Browse..."
h. You can find the drivers in the "SDKInstallLocation"\sdk\extras\google\usb_driver directory and click OK. Replace SDKInstallLocation with the location that you selected during installation of the SDK.
i. Select the "Android ADB Interface" driver from the list and click Next.
j. Confirm installation by clicking on "Yes". Sometimes you also have to click on "Install" if a screen pops up to ask you again if you really want to install the driver...
k. Click "Close".
To use it:
Open a command prompt (in search type "cmd" followed by ENTER) and go to the following directory ""SDKInstallLocation"\sdk\platform-tools".
If you want a backup of your tablets system directory (highly recommended!) use:
"adb pull /system C:\system"
where C:\system is the target location on your local computer where you want the backup of the system directory.
Remove the update package (this doesn't work for updating the tablet, so, useless.)
adb remount
adb shell
cd system/app
rm Update.apk
exit
Remove the unwanted apps (dragonfire.apk etc)
adb remount
adb shell
cd system/preinstall
rm *
exit
If you would like to have your tablet in the correct time zone after factory reset, you will have to adjust the build.prop file.
First you need to get it to your pc so you can edit it:
in the command prompt window and at the same location as in the tutorial above type "adb pull /system/build.prop C:\temp\build.prop".
Just in case, make a copy of the build.prop in Windows Explorer so you always have the original file if something goes wrong.
Now you can edit the build.prop, but DON'T EDIT IT WITH THE WINDOWS NOTEPAD! Use Notepad++ or similar to edit the build.prop.
After you made the changes (and be careful here, you could end up with a tablet that does not want to boot up, solution further down below) you have to upload the file back to your tablet.
in the command prompt type:
adb remount
adb push C:\temp\build.prop /system/build.prop
adb shell chmod 644 /system/build.prop
Don't forget the last line! If you do not chmod the file (set the correct permissions) your tablet will not boot up.
Changes in the build.prop:
Time zone:
Default time zone is "persist.sys.timezone=Europe/London"
you can change this to your locale time zone like "persist.sys.timezone=Europe/Amsterdam" (for the netherlands )
Search the internet for valid time zones.
Change the default language:
The default language is determined by these two values in the build.prop:
persist.sys.language=en
persist.sys.country=US
For dutch change them to:
persist.sys.language=nl
persist.sys.country=NL
and again, search the internet for valid language values.
Higher brightness after factory reset:
Add the following line to the build.prop file (at the top of the file)
ro.ph.def_brightness=225
You pushed the build.prop without changing the permissions:
No problem. Just connect your booting tablet to the PC, install the driver if its not installed correctly like explained in the tutorial, and then change the rights via adb. It's no problem that it's not fully booted!
in a command prompt in the adb directory:
adb remount
adb shell chmod 644 /system/build.prop
adb reboot
If you pushed a wrong non functioning build.prop, just use this method to push the original build.prop (you know, the copy you made ) back to the device (followed by setting the correct permissions of course).
Remove the (in my opinion) irritating boot sound:
adb remount
adb shell
cd system/media
rm boot.wav
exit
rom download
can you provide another way to download the rom file ,i cant seem to get the registration process to work
stevethesignguy865 said:
can you provide another way to download the rom file ,i cant seem to get the registration process to work
Click to expand...
Click to collapse
I have dropped it here. Hope this helps
I bought the same tablet for my daughter. She's (and so am I) suffering from a lot of annoying popups and ads.
Thanks for sharing your instructions here, very hard to find them!
Since I'm a complete newbie: one important question. When you flash the ROM, all of the apps (games) will be removed I guess?
Second question: can you put the stock rom on a different location? Both of the links (including Filedropper) don't contain any files...
Thanks!
1ce/ said:
I bought the same tablet for my daughter. She's (and so am I) suffering from a lot of annoying popups and ads.
Thanks for sharing your instructions here, very hard to find them!
Since I'm a complete newbie: one important question. When you flash the ROM, all of the apps (games) will be removed I guess?
Second question: can you put the stock rom on a different location? Both of the links (including Filedropper) don't contain any files...
Thanks!
Click to expand...
Click to collapse
Yes, all applications will be removed. As soon as you configure the tablet again with the same gmail account, it will probably start installing the applications and games automatically, but in game progress will be lost for most (not online) games.
I am re-uploading the file. Will update this post with the link as soon as it finishes
edit: upload finished, get it while its there LINK
BlueFlame said:
edit: upload finished, get it while its there LINK
Click to expand...
Click to collapse
Great! Thanks for the swift response. The file is about 307 MB. Is this correct? I'll start working on it, probably this weekend. I'll keep you posted.
1ce/ said:
Great! Thanks for the swift response. The file is about 307 MB. Is this correct? I'll start working on it, probably this weekend. I'll keep you posted.
Click to expand...
Click to collapse
Yes, thats correct. Once unpacked it will be around 520 MB.
Good luck!
Hi BlueFlame,
Thanks for the post. Is it possible to get the image uploaded again? Would be much appreciated.
Maylar said:
Hi BlueFlame,
Thanks for the post. Is it possible to get the image uploaded again? Would be much appreciated.
Click to expand...
Click to collapse
On request. You can find it here. (Adjusted link. Stored on Google Drive)
Thanking you. Very much appreciated.
Thank's for a fantastic procedure... Worked very well.
First step doesn't work for me: Phoenixsuit gives an error: 'Open Firmware failed'
with three possible reasons:
- firmware version is too old
- firmware format is broken
- firmware is used by other application.
Version used: 1.0.6
Firmware file: a33_599x_v11_1024x600_gc0308_2035_1015a.img
Any ideas?
1ce/ said:
First step doesn't work for me: Phoenixsuit gives an error: 'Open Firmware failed'
with three possible reasons:
- firmware version is too old
- firmware format is broken
- firmware is used by other application.
Version used: 1.0.6
Firmware file: a33_599x_v11_1024x600_gc0308_2035_1015a.img
Any ideas?
Click to expand...
Click to collapse
Is that the firmware that I provided?
If not, try to download it again.
If so, I think that your tablet has a newer firmware than this one. You could contact the seller of your tablet for the current (latest) firmware for this tablet.
If you get a newer firmware, please share
Image file invalid
Hi Blueflame,
I've tried to re-flash, but at some point i'm getting the message at livesuit V1.11 that the image file is invalid.
It's the 3rd time i have downloaded the file, what could be cause of this error?
Greetz Mike
mcwheelz said:
Hi Blueflame,
I've tried to re-flash, but at some point i'm getting the message at livesuit V1.11 that the image file is invalid.
It's the 3rd time i have downloaded the file, what could be cause of this error?
Greetz Mike
Click to expand...
Click to collapse
Not sure. Will upload it again this weekend just to be sure that it's not my uploaded image. (I will let you know once I've done that)
You can, on the other hand, contact the supplier (where you bought the tablet) and ask them for the latest version of the ROM. I would also be interested in that
BlueFlame said:
Not sure. Will upload it again this weekend just to be sure that it's not my uploaded image. (I will let you know once I've done that)
You can, on the other hand, contact the supplier (where you bought the tablet) and ask them for the latest version of the ROM. I would also be interested in that
Click to expand...
Click to collapse
Uploaded again! same link (just made it a new version in Google Drive).
Open Firmware failed - possible solution
1ce/ said:
First step doesn't work for me: Phoenixsuit gives an error: 'Open Firmware failed'
with three possible reasons:
- firmware version is too old
- firmware format is broken
- firmware is used by other application.
Version used: 1.0.6
Firmware file: a33_599x_v11_1024x600_gc0308_2035_1015a.img
Any ideas?
Click to expand...
Click to collapse
Try to put the image file in a directory without special characters (i.e. c:\temp). Worked for me.
wundabua
Te real FIX is In!
Ok, i have one of these allwinner, Venstar, "whatever", A33 D140v tablets. It had all the usual problems and more, because the first thing I tried, was to use the built in recovery to "restore to factory". This made things even worse, because after the recovery, I couldn't reach the Google authentication servers.
I am pro tech with 25 years in the trenches and I have to admit this thing really threw me for a loop, because I spent an entire day researching the solution, installing Android SDK, drivers, Phoenix Suit, Live Suit, etc. These were all very complicated "solutions" that took me exactly nowhere. I finally found the answer in a rather stupid Youtube video.
The REAL answer is actually very quick and easy compared to all these other recommended methods.
In the first place, model V140d image is only used for these infected tablets. The actual model is V11 and once you use the quick restore method I discovered, you will have a malware free V11 model. The whole secret to this method, is the fact that these units were designed to be quickly, automatically and completely restored in less that 5 minutes through the use of their built in micro SD slot.
Imagine that!
If you check your tablet that came new in the box as something other than V140d, the method I used will most probably not work for you.
Anyway, the quick method I discovered, can be seen on my own tech support site. To find it, Google: Just Call Techdude
Then click on the support link at the top of the page on my site and all will be revealed.
techdudester said:
Ok, i have one of these allwinner, Venstar, "whatever", A33 D140v tablets. It had all the usual problems and more, because the first thing I tried, was to use the built in recovery to "restore to factory". This made things even worse, because after the recovery, I couldn't reach the Google authentication servers.
I am pro tech with 25 years in the trenches and I have to admit this thing really threw me for a loop, because I spent an entire day researching the solution, installing Android SDK, drivers, Phoenix Suit, Live Suit, etc. These were all very complicated "solutions" that took me exactly nowhere. I finally found the answer in a rather stupid Youtube video.
Click to expand...
Click to collapse
Hi techdudester,
The combination "pro tech with 25 years in the trenches" and "very complicated "solutions"" sounds a bit strange.
But either way, a THANK YOU is in order!
The ROM you found works on my tablet (flashed yesterday) and so far so good. No popups and no unwanted application downloads!
I will adjust my initial post to incorporate this image.
Related
Greeting,
It was heard that rooting T-01D are similar as F-05D.
I found a website regarding rooting F-05D, but I dont read Japanese, just want to know if anyone have tried the enclosed method to root T-01D?
or could anybody do the translation, since the terms become quite strange after using the online translators
The following link is ref. of rooting F-05D:
ttp://ayati.cocolog-nifty.com/blog/2012/01/f-05droot-1d0b.html
(should be "http" rather than "ttp")
The source code of T-01D have been provided also, but I have no idea how to use it and root the machine:
ttp://spf.fmworld.net/oss/t-01d/data/download.html
(should be "http" rather than "ttp")
Thank you very much in advance?
Update of 4/4
the following t-01d rooting procedures is provided by Magimaster
Hello.
I am sending this pm regarding the translation for flashing the Fujitsu f-05d sold by Docomo in Japan. I cannot reply in the development section due to my low post count.
My phone is an f-05d. I do not have a t-01d but, according to the original rooting guide for the f-05d, the users are reporting success in rooting the t-01d as well.
I will not really translate for you. Rather, I will explain what I did to root my f-05d.
Here is a rough summary of the steps I followed:
For starters, you need to make sure that adb recognizes your phone when connected to the PC via USB. This means that you need to install the Android SDK and the USB driver for your t-01d by Fujitsu.
I had trouble getting adb to recognize my phone, as Window$ insisted in recognizing it as an USB drive. What I did, among other things, was:
In the phone settings, go to Applications > Development and check USB Debigging and Stay awake.
Install the Google USB Driver package, in the extras section of the Android SDK Manager.
With the phone connected to the PC, go to Window$ device manager > Universal Serial Bus Controllers and uninstall (use the delete key from your the keyboard) every mass storage device that appeared when my phone was connected. Disconnect and reconnect the usb cable.
Only until I did this final step was my phone recognized and listed as Android Phone > Android Composite ADB Interface in the device manager. If your device is not recognized, you just cannot continue. Look for help about this, or else you cannot move on with this method of rooting.
Confirm that your phone is recognized as Android Phone > Android Composite ADB Interface in the Window$ device manager. Do not continue until it is.
From the Android SDK manager, install the package android sdk platform-tools.
You need download F05Droot.zip from the original blog page your linked before. I will not link to the file directly, but you should have no problem finding it. Extract the files within into the program directory \Android\android-sdk\platform-tools (this is my path).
You need to download a replacement for the file lsm_disabler.ko that is inside the F05Droot.zip. Get it from here and extract it an replace the one inside the platform-tools directory.
By the way, this platform-tools directory is the one that has the adb executable file. Just a heads up.
You need to download su. I cannot tell you where to get it. I just do not know where I got mine from, but was easy so go for it When you have it, extract it and put it in the platform-tools directory.
Confirm that the platform-tools directory includes these files:
Code:
adb.exe
AdbWinApi.dll
AdbWinUsbApi.dll
su
lsm_disabler.ko
f05dsu.bat
There will be more, but these are the ones needed for this to work.
Now, get ready to root. Connect your phone to the PC.
Go to your phone settings > setting my body > step/activity counter app > pedometer use and confirm it is checked on.
In the platform-tools directory, look for f05dsu.bat and run it. A DOS window will open. This is the funny part. Unless you are doing this from a Japanese version of Window$, or from a Window$ with Japanese locale active, you will see a lot of strange symbols instead of Japanese characters... which would be the same for almost anyone anyway Regardless, you will see a prompt to Press any key to continue . . .. At this point, you do not need to do anything on your phone, other than visually checking that the check mark on the pedometer is set.
On the DOS window press any key, your will see more garbage and another prompt to press any key. This is the important part. See if you can find among all those symbols this pattern: OFF/ON. If you do see it, it means we are on track.
Now that you were able to see the OFF/ON, go to your phone and uncheck the pedometer (OFF) and check it again (ON).
In the DOS window, press any key. Your phone will reboot. The message in the DOS window says that you must wait for the phone to boot up and for Window$ to recognize your usb connection to the phone.
When/if your phone is recognized by Window$, go to the DOS window and press any key.
Again, press any key and your phone will reboot.
The DOS window has a message indicating that you must now install superuser and busybox. When your phone reboots, go to the android market and install from there when you have the time.
You can now close the DOS window because, unless there was any error, you are now rooted, my friend
From the market, install a terminal, or an app that includes a terminal. I use Rom Toolbox because it has a terminal and scripts to mount the /system as rw.
Open whatever terminal you chose and, at the $ prompt type su
If new prompt is #, type soff
You will need to run these commands every time before trying to mount /system as rw.
That is all. I hope you can root your phone.
Just a petition, post this message in the forums, as it may help others who have similar difficulties. It sure could have helped me if someone had done before me.
Have a nice one and please forgive my English.
Click to expand...
Click to collapse
update 15/4
On 13/4 finally i got my phone rooted
I have to run f05droot.bat instead of f05dsu.bat
After I have run the f05dsu.bat, for the steps, no error popout.
then I open the terminal type su, it reply me "permission denied".
I know it is not successful, after several run, the situation still the same.
after that have checked the contents of f05droot.bat and f05dsu.bat.
They are very similar but the f05droot.bat will push the superuser and busybox into the device at the same time.
(so I added those files in the directory \Android\android-sdk\platform-tools )
Therefore, i tried that and its works finally.
I feel really exciting at that moment.
I hope this post can help they T-01d user to root the phone.
personally I really like this phone ^~^
the su file is also important
Anyone try it? Does it work?
I have got the source code from its web
But I dont know how to use that and lead me to root the machine
ttp://spf.fmworld.net/oss/t-01d/data/download.html
Can you post a review of this device?
redcarrot said:
Greeting,
It was heard that rooting T-01D are similar as F-05D.
I found a website regarding rooting F-05D, but I dont read Japanese, just want to know if anyone have tried the enclosed method to root T-01D?
or could anybody do the translation, since the terms become quite strange after using the online translators
The following link is ref. of rooting F-05D:
ttp://ayati.cocolog-nifty.com/blog/2012/01/f-05droot-1d0b.html
(should be "http" rather than "ttp")
The source code of T-01D have been provided also, but I have no idea how to use it and root the machine:
ttp://spf.fmworld.net/oss/t-01d/data/download.html
(should be "http" rather than "ttp")
Thank you very much in advance?
Click to expand...
Click to collapse
If you have time, can you please post a mini review of the device? I wanted to buy one too and I'm quite excited reading your review!
Thanks and more power!
Here is the mini review
Screen color is perfect except black and accurate. Speed is good in comparing with SGS2. Battery life is similar to SGS2. Form factor is better than SGS2. Camera is outstanding, thanks to the 1.3MP camera. Waterproofing design is what I like. The bad is upgrading is only possible in Japan. Digital TV is useless. Sound level is a bit low.
personally i like this phone very much especially the outlook.
my personal review is the following:
1. same as above the screen is perfect
2. the camera is also excellent
3. while you have a phone call, it change mode automatically depends on the environment
4. if i switch off all the data things, this phone can stand more than one day
(so i wont blame the battery, because I think we use too many network related stuffs)
5. i have to admit that the firmware is not quite stable (fortunately the phone can be upgrade to 4.0 after july)
for the rooting process, it seems like someone has success:
(i think that is temp root)
search "T-01D 軟解, tofu-keitai" in google (that is chinese unfortunately)
redcarrot said:
Greeting,
It was heard that rooting T-01D are similar as F-05D.
I found a website regarding rooting F-05D, but I dont read Japanese, just want to know if anyone have tried the enclosed method to root T-01D?
or could anybody do the translation, since the terms become quite strange after using the online translators
The following link is ref. of rooting F-05D:
ttp://ayati.cocolog-nifty.com/blog/2012/01/f-05droot-1d0b.html
(should be "http" rather than "ttp")
The source code of T-01D have been provided also, but I have no idea how to use it and root the machine:
ttp://spf.fmworld.net/oss/t-01d/data/download.html
(should be "http" rather than "ttp")
Thank you very much in advance?
Update of 4/4
the following t-01d rooting procedures is provided by Magimaster
Click to expand...
Click to collapse
It really work!~
I rooted my T-01D with this method!
And it's permanent root!!
Many thanks!~
hi HaoyuWen,
i have followed the steps, when i type su in the terminal simulator, it comes out segmentation fault su, do you have any idea.
I use titanium backup to check and it said my t-01d is not rooted.
for the pedometer on/off things, do i need to press the home key and go back to the pedometer to do the switch?
Thank you very much in advance
HaoyuWen said:
It really work!~
I rooted my T-01D with this method!
And it's permanent root!!
Many thanks!~
Click to expand...
Click to collapse
So both F-05D and T-01D can use this ?
yes, but i havnt got that work yet.
just want to know when I get the device rooted, will the device screen shows the device is rooted?
finally i got my phone rooted
you have to run f05droot.bat instead of f05dsu.bat
the su file is also important
redcarrot said:
yes, but i havnt got that work yet.
just want to know when I get the device rooted, will the device screen shows the device is rooted?
Click to expand...
Click to collapse
You can install a root checker to see
^ Please update it on the front page
Gonna get mine soon, so excited to hear this
wth_is_life said:
You can install a root checker to see
^ Please update it on the front page
Gonna get mine soon, so excited to hear this
Click to expand...
Click to collapse
I think I brick my T-01D. Don' know why, I do exactly the same what I have been told here... Now It ends up infinite boot loop
Anybody help me please?
Hey there everyone, sadly this guide isn't working for me. Everything in the guide goes smoothly and I do exactly what is listed but after my phone reboots the final time I still have no root access. I run f05droot.bat instead of f05dsu.bat like the user said but to no avail, I even ran f05dsu.bat and still nothing.
Anyone else have trouble? Maybe it is because I am on a certain FW? I am on 2.3.5
Baseband Version C_L1_M23
Kernel version: 2.6.35.7 [email protected] #1
and Build number is V43R41C
Just wondering as I really want root to disable all of these RAM-hogging default applications.
Bump? Anyone?
As far as I know, this rooting method cannot be done on FW V43R41C.
Sent from my SC-01D using Tapatalk 2
kinchung said:
As far as I know, this rooting method cannot be done on FW V43R41C.
Sent from my SC-01D using Tapatalk 2
Click to expand...
Click to collapse
Aw Thanks for the notice, of course it's my firmware. Any idea about ICS? It was supposed to come out in July but yeah..
I don't know about ICS for t-01d. My sc-01d has been already upgraded to ICS, the performance is improved a lot. sh-01d also gets ICS today.
Sent from my SC-01D using Tapatalk 2
kinchung said:
I don't know about ICS for t-01d. My sc-01d has been already upgraded to ICS, the performance is improved a lot. sh-01d also gets ICS today.
Sent from my SC-01D using Tapatalk 2
Click to expand...
Click to collapse
I see, I read about the T-01D (among many others) getting updated from articles like this: http://forums.hardwarezone.com.sg/e.../docomo-update-ics-4-0-18-models-3662812.html
I'm sure the T-01D would perform pretty awesome and maybe pre-installed software would not be as big a deal as it is now. Maybe since your SH-01D is getting updated, T-01D isn't far behind. The only thing I have to see is if I can update out of Japan.
I don't have sh-01d but galaxy tab 10.1 sc-01d instead. My t-01d also upgraded to V43R41C last month during visiting Japan. Upgrade of t-01d may not be possible outside Japan as Software Update cannot be executed without docomo sim and network.
Sent from my SC-01D using Tapatalk 2
I've been working on this for days and I'm on the verge of giving up and send my android tablet back to the retailer but, on the off chance that someone can help, I thought I'd post a plea for help.
I have been playing with my mother's birthday gift, an android tablet, in an attempt to put a bird watching app on it. I'm not used to this OS, so it took me a few days to get the hang of it, and then the wifi stopped working.
From a user perspective, you turn on the wifi and, after 20 seconds, it turns itself off and the tick disappears.
I decided to look a little further into the problem, as I didn't believe it was the hardware so soon, and used LauncherPro and SuperOneClick to root the tablet and ddms to see what was going on.
Anyway, I think I have tracked the issue to the wpa_supplicant file. I can load up the wifi interface from the command line:
insmod /system/lib/modules/8192cu.ko
busybox ifconfig wlan0 up
But when I ran the original wpa_supplicant in /system/bin/ it simply said "not found"
The file was there - I could copy it onto a usb stick and open it in a hex editor on my PC, but whatever I did, it would say "not found" if I tried to use it (chmod 777 as well).
When I got no joy from that, I started to look for alternative wpa_supplicants (there was no sign of a direct replacement for my disgo8100 2.3.3 version) and found the ad-hoc enabled ones.
I have tried a selection, but the one that comes closest to working (I mounted the system rw and replaced the original before mounting it ro again) insists on running as "wifi" (or 1010) when the original ran as "system" (or 1000).
This seems to mean that, although the supplicant runs happily, it doesn't create the /data/system/wpa_supplicant/wlan0 file in a form that other programs can access (wrong group/permissions, I think).
So, this has become very frustrating (but I've learned a lot about android, and how it differs from linux).
Can anyone provide an explanation for why the original file says "not found"? Could it be corrupt? If so, could someone provide a replacement from the disgo 8100? Could it be relying on a library that's not there?
What about the ad-hoc version I have? Can I force it to run as system.system instead of wifi? Am I wasting my time and should try to get disgo to provide a whole replacement rom (they have an update apk, but I believe you need to connect to the Internet to do an OTA update, which I can't).
As I said, I'm ready to send this tablet back, but I hate to admit defeat!! Any help would be gratefully received.
Cheers.
Never mind. Made some progress with the ad-hoc supplicant in this thread:
http://www.freaktab.com/showthread....pa_supplicant-file&p=3600&viewfull=1#post3600
Disgo 8100 Rooting
On the basis that there doesn't seem to be much information about the Disgo 8100, I thought I would post my findings.
I initially tried z4root, universalandroot and gingerbreak, but none of these worked. However, I didn't understand that I needed (or how) to enable USB debugging.
Once I did, I installed LauncherPro-0.8.6.apk and configured a shortcut to the development tab, which let me enable the USB debugging option.
I then downloaded android-sdk_r18-windows and modified the android_winusb.inf file by inserting the following at the end of the [Google.NTx86] and [Google.NTamd64] sections:
;Disgo8100
%SingleAdbInterface% = USB_Install, USB\VID_18D1&PID_1F00
%CompositeAdbInterface% = USB_Install, USB\VID_18D1&PID_1F00&MI_00
When I plugged in the Disgo 8100, windows XP asked for drivers and I pointed it to the edited .inf file so that they could be installed and the disgo was recognised.
I then used SuperOneClickv2.3.3-ShortFuse on the PC to root the tablet - it all worked perfectly and reported success.
Installing term.apk got me a terminal emulator and I could su into root. Hopefully you can get yours rooted, too.
Disgo 8100 Android Market/Vending/Google Play
Whilst I managed to root the tablet, I couldn't get any form of the vending system to work.
I got the play dot google dot com site to recognise my tablet as a T-Mobile Samsung Nexus S using the information in this thread:
http://www.techknow.t0xic.nl/forum/index.php?topic=770.0
But market 2.3.6, 3.4.4 and the latest Google Play all fail with various errors (although I noticed that play only [email protected] out when the wireless is enabled - the others may do the same).
I have taken a log capture of google play failing using ddms and will look through it.
By the way, grabbing the hwver for this tablet gives:
console=ttySAC3,115200 androidboot.mode=normal mem=512M hwver=81.1.0.0 mtdparts=imapx200:[email protected](ramdisk),[email protected](kernel),[email protected](resv),[email protected](system),[email protected](userdata),[email protected](cache),[email protected](Local-disk),[email protected](panic) androidboot.mode=normal
Google Play working on Disgo 8100
Drawing this one to a close, in case anyone is interested:
I have Google Play installed and working. I downloaded com.android.vending-3.5.15.apk from the link in this thread:
http://www.theandroidsoul.com/download-google-play-store-apk-3-5-15/
I renamed it "Vending.apk" (the capitalisation may be important, not sure), mounted /system as rw (mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system) and copied it into /system/app. I changed permissions to "666".
I cleared the data/cache from the YouTube application and deleted YouTube.apk from /system/app (because it kept locking up) and replaced it with signedy244.apk (renamed as YouTube.apk) from http://forum.xda-developers.com/showthread.php?t=1529715 (the WifiHD version).
Rebooting the tablet, I connected to the WiFi and ran YouTube (in order to confirm my gmail account), which worked fine, and then Google Play, which (to my amazement) worked fine too.
Hope yours does too
Excellent thread! Wish I could thank you but I don't seem to have a Thanks button. Anyway, do you mind if I ask a couple of questions re. rooting the 8100:
1) Was your tablet running Android 2.3.3, kernel 2.6.35.7, build number GRI40?
2) Could you explain in a bit more detail what you did when you "configured a shortcut to the development tab"?
a3d35232 said:
Excellent thread! Wish I could thank you but I don't seem to have a Thanks button. Anyway, do you mind if I ask a couple of questions re. rooting the 8100:
Click to expand...
Click to collapse
Glad you like it.
a3d35232 said:
1) Was your tablet running Android 2.3.3, kernel 2.6.35.7, build number GRI40?
Click to expand...
Click to collapse
Yes.
a3d35232 said:
2) Could you explain in a bit more detail what you did when you "configured a shortcut to the development tab"?
Click to expand...
Click to collapse
a. Install launcherpro
b. Press home in the top left corner
c. Choose launcherpro
d. Press and hold a blank part of the screen
e. Choose shortcuts
f. Choose activities
g. Choose settings (scroll down to it)
h. Choose development (scroll down - not in alphabetical order)
i. Press ok
You should now have a desktop icon that lets you turn on USB debugging.
Enjoy
Thanks. Everything worked as you describe except the signedy244 version of YouTube. Whenever I launch it I get an error message "There was a problem with the network [400]". Searching on the net, it seems a lot of people are seeing this error and there may have been an update to the app which isn't in the signedy version. Are you still able to run it?
a3d35232 said:
Thanks.
Click to expand...
Click to collapse
No problem.
a3d35232 said:
Everything worked as you describe except the signedy244 version of YouTube. Are you still able to run it?
Click to expand...
Click to collapse
Yep, didn't have an issue - dropped it into the app folder, chmod and rebooted; worked first time and tested it a few times. The file I downloaded was 2,554,313 bytes, in case you want to check.
FYI, the issue I was having with the YouTube app was that it was making requests to the server with "restriction=ZH" in the uri. The server was replying with a HTML 400 error (bad request) because ZH is a language code, not a country code. Anyway, I've patched the app further to remove the restriction parameter from the request. I've posted details in the YouTubeHD thread (about half-way down page 36) if you're interested.
Any chance of telling a idiot how to get google play on the Disgo 8100?
My dad got given one at work but the app store sucks and I'm a little confused by the above
Many thanks
hey everyone long story short i rooted my tablet a while back and started having problems so i flashed a new rom and the wifi isnt working.
I went to androidfiles.org and clicked nabi 2 and download wifi-fix, ota update and stock zip rom and flashed those three zip files ( i compressed them) in twrp.. its booting up and everything but wifi isnt working. ive read a lot of peeps are having wifi probs. I have a xda link for my exact device and you guys tell me wut the hell im supposed to do. its got all kinds of stock roms and ota updats and stuff,... which one do i use wtf do i do. should i go one at a time from lowest to biggest, do i even need ota updates or w./e that is?!?!?!? please help guys my chirstmas is becoming a nightmare... its my only internet source.. i had to come all the way to the dang library for this crap.. please help!!!!! heres the link that might give u guys an idea on how to help.. heres the stock roms and stuff
http://forum.xda-developers.com/wiki/Fuhu_nabi_2 thank you!!!!!
duuude im baked said:
hey everyone long story short i rooted my tablet a while back and started having problems so i flashed a new rom and the wifi isnt working.
I went to androidfiles.org and clicked nabi 2 and download wifi-fix, ota update and stock zip rom and flashed those three zip files ( i compressed them) in twrp.. its booting up and everything but wifi isnt working. ive read a lot of peeps are having wifi probs. I have a xda link for my exact device and you guys tell me wut the hell im supposed to do. its got all kinds of stock roms and ota updats and stuff,... which one do i use wtf do i do. should i go one at a time from lowest to biggest, do i even need ota updates or w./e that is?!?!?!? please help guys my chirstmas is becoming a nightmare... its my only internet source.. i had to come all the way to the dang library for this crap.. please help!!!!! heres the link that might give u guys an idea on how to help.. heres the stock roms and stuff
http://forum.xda-developers.com/wiki/Fuhu_nabi_2 thank you!!!!!
Click to expand...
Click to collapse
Thought I would share some info I found when I ran into the wifi problem on my daughter's nabi. I did some searches on the internet and the typical answer I found for solving the wifi issue was "reset the device" or "unroot and return to stock rom - flash all updates and reroot". Being a glutton for punishment, and the fact I didn't want to reset the device, I searched and searched and was able to fix my daughter's wifi without doing a reset or unroot/reroot. Before I get into it I wanted to mention that wifi failures can happen for a number of reasons so while this worked for myself, it may not work for you.
Some prerequisites:
Most importantly; you need a rooted device. If you do not have root access you will not be able to write files or access the commands to fix the issue I am about to outline.
Some knowledge of linux would be helpful, but not necessarily required.
Lets get started:
Warning! It goes without saying but I will say it anyways - you can mess up your nabi by rooting it. Some of the commands below could mess up your nabi bad. If this scares you then you probably should not proceed any further. I am not responsible for any damage you do to your nabi.
Commands are listed between ' and ' - do not use the ' when inputing the commands.
Note: The first two/three steps are not necessary but they do give you insight as to how I was able to determine my problem. If following this doesn't fix the problem for you the logcat output may give you some important info that you can google that may help you fix your particular problem.
Note: Steps 5 and on can be skipped if you have a text editor (vi or nano) on your device. If you have a text editor loaded simply edit the conf file directly.
1. You will need to run the command 'adb logcat' in a command-line window and in your appropriate directory. Adb is available as part of the android sdk but can also be found stand alone since most people do not need the sdk.
2. Try to turn on the wifi. You should see the output of your adb logcat window scroll some data. If the wifi is not attempting to turn on at all sometimes you can move between the settings options then go back to the wifi settings and move the slider. If you cannot get your wifi to turn on you can scroll the window up and attmept to find the data from when the device started up. In the output you should see lines that talk about wlan0 and probably something that says "failed" somewhere. In my case I could see where the wlan0 enabled but then a few lines down it said something about "Line: 25 failed" and "failed to parse file".
3. The file is actually a configuration file used by the wifi kernal module/driver. In my case this file had become corrupted.
4. Set adb in root mode (won't work if the device does not have root access) by running 'adb root' at the command-line. You may need to click on an "allow root permission" window on the actual device after running this command.
5. Run 'adb pull /data/misc/wifi/wpa_supplicant.conf' from command-line. If this does not work then do the following:
a. Run 'adb shell' from command line.
b. 'su'
c. 'cat /data/misc/wifi/wpa_supplicant.conf' - copy the output from the command and paste into a text editor (see note in step 6 on why NOT to use notepad).
d. Save the file as wpa_supplicant.conf, preferrably in the same diretory as adb.
e. 'exit' twice should exit you from the adb shell and return you to your command-line. If all else failes a "ctrl-c" should drop you out of adb.
6. Use a text editor to open wpa_supplicant.conf. The file should be located int he same directory as adb. If you are using Windows I would strongly suggest you NOT use notepad. Notepad will typically change all the EOLs (End Of Line) from \n to \r\n which will really mess things up worse.
7. In the file you should see "network={" entries. There maybe one entry, there maybe many entries. You can remove all lines between "network={" and "}" including the latter themselves. If you see your 'home' network listed you can leave it as the only entry and make sure its priority is set to 1 but it maybe better to remove it as well just in case it contains part of the corrupted data.
8. Save the file.
9. Do 'adb push wpa_supplicant.conf /data/misc/wifi/wpa_supplicant.conf' from command-line. If this does not work then do the following:
a. Run 'adb push wpa_supplicant.conf /sdcard/wpa_supplicant.conf' from command-line.
b. Run 'adb shell'
c. 'su'
d. 'dd if=/sdcard/wpa_supplicant.conf of=/data/misc/wifi/wpa_supplicant.conf'
e. Do 'exit' twice to exit the adb shell. If all else fails then a "ctrl-c" should drop you ot of adb.
10. If the wpa_supplicant file was corrupted then the wifi should now be able to enable and you should now be able to connect to a network.
I hope this is helpful to at least a few people.
This thread has been deleted.
This thread has been deleted.
This thread has been deleted.
***** really really really reserved*****
Working w/ Root on a Mac (OSX Yosemite)
CONFIRMED: This works using AT&T (SM-R750A), OSX (Yosemite), VirtualBox and Windows XP. See this link for the driver setup I used on my Mac.
http://www.onebadkid.com/?p=6930
I also find that after factory reset, I still have root! Great job!
---
Also, I haven't been able to get the scripts to work in the virtual machine so I've just been "pushing" the files manually. I did open up the scripts to get the destinations for the various files, so thank you OP. Also, you have to have the Tizen Wearables SDK installed and then use SDB commands in the terminal.
Remember, when using SDB on a Mac, it's: ./sdb [command] (you have to use the "dot-slash")
./sdb devices (to show whether or not your device is connected)
./sdb root on
./sdb shell (puts you into the device's shell so you can navigate the device in a Darwin/Linux terminal)
./sdb push [/full path of the file you want to upload to the device] [/full path of the desination]
I usually open up three Darwin/Linux Terminals on my Mac. One to use to navigate my watch in shell, the other to run the ./sdb command (just like in Windows, you have to run SDB on the mac from within it's home location: "/Users/[you]/tizen-wearable-sdk/tools"), and a third to drop files into so I can quickly see their full file path/location.
"PWD" = print working directory so you can use that in the Darwin/Linux Terminal so you don't get lost.
I'm using Windows 8.1 (don't know if it matters) but after updating to this driver my PC no longer recognized my Gear S. Had to roll back to previous driver.
Ohhhhh!!!
ohh SO installing these and getting it ready for the rest
Edit: got rootfs.img odin'd in so now i wait lmao
Wondering
Good write up so far. I had already gotten root from the previous thread with horrible direcions. LoL After I got my replacement gear s (ALWAYS CHECK YOUR SIM COVER), I rooted it using the bad direction method again (luckily I already know how to do these things), but your directions are very clear cut and noob friendly. You're doing a huge favor to new comers who come looking to root their gear. Hopefully they don't brick them before they find this.
cipherswitch said:
Got any request for certain alarms, notification sounds or ringtones? Shoot me a PM and I will get through them as fast as I can and repost here.
No themes as of yet, but I will definitely be working on custom clock faces apart from everything else
Click to expand...
Click to collapse
Reset my gear to factory to try out your method.
Odin'd over the root img and all went well after a few reboots (dont' turn off destination, installing new configuration, final reboot).
Watch reboots, open a command prompt and type "sdb root on" (Switched to'root' account mode)
sdb shell whoami
root
sdb shell setup-folder.sh
-1: /bin/setup-folder.sh: Permission Denied
I went and checked your .bat file and it uses the same command. The device says I have root but it's read only file system. I have been trying every trick I know the past half hour; any thoughts?
Megaflop666 said:
Reset my gear to factory to try out your method.
Odin'd over the root img and all went well after a few reboots (dont' turn off destination, installing new configuration, final reboot).
Watch reboots, open a command prompt and type "sdb root on" (Switched to'root' account mode)
sdb shell whoami
root
sdb shell setup-folder.sh
-1: /bin/setup-folder.sh: Permission Denied
I went and checked your .bat file and it uses the same command. The device says I have root but it's read only file system. I have been trying every trick I know the past half hour; any thoughts?
Click to expand...
Click to collapse
Do this
sdb root on
sdb shell
chmod +x /bin/setup-folder.sh
./bin/setup-folder.sh
Megaflop666 said:
Reset my gear to factory to try out your method.
Odin'd over the root img and all went well after a few reboots (dont' turn off destination, installing new configuration, final reboot).
Watch reboots, open a command prompt and type "sdb root on" (Switched to'root' account mode)
sdb shell whoami
root
sdb shell setup-folder.sh
-1: /bin/setup-folder.sh: Permission Denied
I went and checked your .bat file and it uses the same command. The device says I have root but it's read only file system. I have been trying every trick I know the past half hour; any thoughts?
Click to expand...
Click to collapse
Color me embarrassed. It seems in the final uploads, I nabbed the rootfs file that wasn't done yet. Uploading the new file now,sorry for the delay.
I reset, flashed the wrong one to confirm the issue then flashed the correct rootfs and confirmed it working. That was the issue, Im waiting for the new one to upload to mediafire now.
and yeah, I couldnt type this morning, totally freaking out.
cipherswitch said:
Color me embarrassed. It seems in the final uploads, I nabbed the rootfs file that wasn't done yet. Uploading the new file now,sorry for the delay.
I reset, flashed the wrong one to confirm the issue then flashed the correct rootfs and confirmed it working. That was the issue, Im waiting for the new one to upload to mediafire now.
and yeah, I couldnt type this morning, totally freaking out.
Click to expand...
Click to collapse
Its all good, I decided to tear into some things and bricked the damn thing, so I am sitting here waiting (forever) for the original firmware to download so I can factory restore it. I was not even able to get into recovery, just download mode. LoL
Oh well, if flashing the original firmware doesn't fix it, i'll take it up to Tmo at 10am and get a new one.
new rootfs uploaded as of 12/17/14 8:42 am est, I also updated the link in the writeup.
::::::Just a quick dirty write-up of how to load sounds with your newly rooted Samsung Gear S::::::
Since most folks are rooting their Gear S for the ability of adding Ringtones (which can be done via a pay app) and adding Notifications, Wallpapers, Watch Faces, you get it......
Once you have followed the awesome rooting guide contained here and you want to load some stuff:
Path for Ringtones:
/opt/share/settings/Ringtones/
Path for Notifications:
/opt/share/settings/Alerts/
Path for Wallpapers:
/opt/share/settings/Wallpapers/
Path for Alarm Sounds:
/opt/share/settings/Alarms/
I have placed both mp3 and off files and they both work fine. Sometimes when setting your applicable Alert/Notification/Ringtone and the file is a mp3, the sound will not play, no worries, it will when the Alert/Notification/Ringtone is invoked.
To load files (Choose appropriate folder listed above)
sdb root on
sdb shell ls /opt/share/settings/Alerts/ (Shows directory listing for /opt/share/settings/Alerts/ on the Gear 2)
sdb push NAMEOFFILE /opt/share/settings/NOTIFICATION_TYPE_FOLDER (ie /Alerts or /Ringtones)
Megaflop666 said:
Its all good, I decided to tear into some things and bricked the damn thing, so I am sitting here waiting (forever) for the original firmware to download so I can factory restore it. I was not even able to get into recovery, just download mode. LoL
Oh well, if flashing the original firmware doesn't fix it, i'll take it up to Tmo at 10am and get a new one.
Click to expand...
Click to collapse
It is SO hard to brick this device so you will be fine! If you get into the firmware failed to install screen you're still good to go. Like I said, I got to bootloops and thought it was dead but stock fixed everything.
No worries you're fine!
You'll be fine!
You will be fine. I've been able to restore from this screen using stock.
Um actually..... its easier. Connect your gear, drop your content into the right folders (eg; ringtones, alerts and such) and run the update script. done and done.
ipstack said:
::::::Just a quick dirty write-up of how to load sounds with your newly rooted Samsung Gear S::::::
Since most folks are rooting their Gear S for the ability of adding Ringtones (which can be done via a pay app) and adding Notifications, Wallpapers, Watch Faces, you get it......
Once you have followed the awesome rooting guide contained here and you want to load some stuff:
Path for Ringtones:
/opt/share/settings/Ringtones/
Path for Notifications:
/opt/share/settings/Alerts/
Path for Wallpapers:
/opt/share/settings/Wallpapers/
Path for Alarm Sounds:
/opt/share/settings/Alarms/
I have placed both mp3 and off files and they both work fine. Sometimes when setting your applicable Alert/Notification/Ringtone and the file is a mp3, the sound will not play, no worries, it will when the Alert/Notification/Ringtone is invoked.
To load files (Choose appropriate folder listed above)
sdb root on
sdb shell ls /opt/share/settings/Alerts/ (Shows directory listing for /opt/share/settings/Alerts/ on the Gear 2)
sdb push NAMEOFFILE /opt/share/settings/NOTIFICATION_TYPE_FOLDER (ie /Alerts or /Ringtones)
Click to expand...
Click to collapse
sbrownla said:
It is SO hard to brick this device so you will be fine! If you get into the firmware failed to install screen you're still good to go. Like I said, I got to bootloops and thought it was dead but stock fixed everything.
No worries you're fine!
Click to expand...
Click to collapse
I wasn't worried to begin with. It's dead, stock firmware flash didn't even fix it. New one will be here tomorrow afternoon. It'll be my third one since I first bought it done my kids drowned the first one. Lmao
Megaflop666 said:
I wasn't worried to begin with. It's dead, stock firmware flash didn't even fix it. New one will be here tomorrow afternoon. It'll be my third one since I first bought it done my kids drowned the first one. Lmao
Click to expand...
Click to collapse
Hm ... what was it doing when you tried to flash?!
I was working on changing some permissions, rebooted it and it never came back, don't even have recovery. From what tmo said, this has happened to other people on this watch
None of this is my work and all recognition goes to the awesome developers that made this possible, I will link their guides in here with some minor notes for newbies like me that may had some issues trying to unlock and root the Fire Stick (FS) 4K
DISCLAIMER: BE WARNED THAT YOU HAVE TO OPEN YOUR FIRE STICK AND IT WILL VOID YOUR WARRANTY, THIS IS NOT FOR THE FAINT OF HEART AND NEITHER THE DEVELOPERS OR MYSELF ARE RESPONSIBLE IF YOU BRICK YOUR DEVICE OR VOID YOUR WARRANTY
Ok, now let's begin:
UPDATE: Per Sus_i, this makes perfect sense:
"Since the exploit can't be patched, it's in my opinion the best to do the setup at the beginning, pair the remote, then update to the latest over fireOS. That way you avoid a pending update nag setup screen after doing the exploit. Then enable ADB and unknown sources. After kamakiri I would flash only magisk.zip + sideload the manager app with adb... and avoid any prerooted rom flashing until there is an update to a somewhat higher version (and the current 6.2.6.8v1 has that contact manufacturer error screen)."
First very important, I wish I would have known this before but make sure you have a Laptop and a Monitor to Connect the FS to, so basically the USB Power cable from the FS connect it to your laptop and connect the HDMI portion to a monitor or TV
I also strongly recommend to have your FS deregistered before continuing as this will prevent your FS from automatically updating after rooting
In order to unlock the bootloader follow "THIS GUIDE"
I made a quick video on how to open your device and how to Short it using Aluminum Foil:
https://www.youtube.com/watch?v=h4I6ifBLWJ4
Process is pretty self explanitory, make a USB ISO from the image provided on that thread, boot into it and open terminal, make sure you put the file he provides on a RW location, my mistake was that I put it inside a RO folder and it would not load the script, so I mounted the kamakiri-mantis-v1.2.zip unto the /mnt directory of the usb and I was able to run the script successfully, make sure to run the commands quickly as the first time that I it finished the ./bootrom-step.sh script and I left it sitting for 10 minutes to grab a bite, I couldn't run the second script and had to start all over. After the second ./fastboot-step.sh script, your device will be on the TWRP recovery, now on the same terminal page or a new one enter these commands:
Code:
adb devices
adb shell
exit
You should see your device's serial number from the first command with "device" to the right of it and the second command will basically put you inside the device's directory assuming you have established a successful connection. The last command just put you back to your starting point, now open the firefox browser on the FireOS USB and navigate to the URL below
Download the Pre-Rooted Image from "HERE" This image contains Magisk already so you don't have to worry about installing it separately, the image is larger than the available partition on this USB so this is a good time to either get a second USB or if you want to download the file to your local hdd and pull them from there its up to you, then run these commands:
Code:
adb push <your download location you decided earlier here>/mantis-6.2.6.8-rooted_r1.zip / sdcard/
adb reboot recovery
adb shell
twrp install /sdcard/mantis-6.2.6.8-rooted_r1.zip
twrp wipe cache
twrp wipe dalvik
reboot -p
This basically installs the pre-rooted image to your device, after the last command, you should see on your monitor the Fire Stick Reboot and boot to the Amazon GUI Splash Screen, now very important if you followed my previous instructions of deregistering your device before performing all these steps, it should bring you up to the Amazon Initial Setup Screen, now what you want to do is do the following commands before continuing on terminal:
Code:
adb devices *you should see something your screen where the FS is connected to, click accept or enter can't remember*
Now it should show you in terminal your serial number and "device" next to it, meaning you can run adb commands in which you will run the following to disable OTA updates:
Code:
adb shell
su *after this command you should see something again on your screen, click the check the box "Always Remember" and click ok" *
if "su" was successful, you should see something like this:
mantis:/ $ su
mantis:/ # *the hash means you're running as root, if you don't have a "#" you are not running as root"
Than continue with these commands and should get the following results:
pm disable com.amazon.tv.forcedotaupdater.v2
***Package com.amazon.tv.forcedotaupdater.v2 new state: disabled***
pm disable com.amazon.device.software.ota
***Package om.amazon.device.software.ota new state: disabled***
pm disable com.amazon.device.software.ota.override
***Package com.amazon.device.software.ota.override new state: disabled***
After running all these commands exit adb and continue with the normal Amazon Setup including adding your amazon account. After you get to the screen where you can see all the apps, open a new web page browser in firefox and download "This Add-On" , this one is less than 200MB so it should fit on the Fire OS USB, so I would download it and copy it to /mnt for ease of access, go back to terminal and type this:
Code:
adb devices
adb push <your download location you decided earlier here>/AFTV-MM-1.7-6.2.6.8.zip/ sdcard/
adb reboot recovery *it will boot into TWRP*
adb shell
twrp install /sdcard/AFTV-MM-1.7-6.2.6.8.zip
twrp wipe cache
twrp wipe dalvik
reboot -p
Your device will reboot and if everything went smoothly, you should have a rooted amazon fire stick 4k, Congrats :good:
Nice guide
Here are a few thoughts from me...
It's important to use the latest kamakiri. The mentioned prerooted 6.2.6.5 is probably a downgrade. A few sticks needs an update of the TZ in order to play prime video. The TZ update is only in the v1.2 Kamakiri or in the 6.2.6.6 prerooted.
Edit: S̵i̵n̵c̵e̵ ̵t̵h̵e̵ ̵e̵x̵p̵l̵o̵i̵t̵ ̵c̵a̵n̵'̵t̵ ̵b̵e̵ ̵p̵a̵t̵c̵h̵e̵d̵,̵ ̵i̵t̵'̵s̵ ̵i̵n̵ ̵m̵y̵ ̵o̵p̵i̵n̵i̵o̵n̵ ̵t̵h̵e̵ ̵b̵e̵s̵t̵ ̵t̵o̵ ̵d̵o̵ ̵t̵h̵e̵ ̵s̵e̵t̵u̵p̵ ̵a̵t̵ ̵t̵h̵e̵ ̵b̵e̵g̵i̵n̵n̵i̵n̵g̵,̵ ̵p̵a̵i̵r̵ ̵t̵h̵e̵ ̵r̵e̵m̵o̵t̵e̵,̵ ̵t̵h̵e̵n̵ ̵u̵p̵d̵a̵t̵e̵ ̵t̵o̵ ̵t̵h̵e̵ ̵l̵a̵t̵e̵s̵t̵ ̵o̵v̵e̵r̵ ̵f̵i̵r̵e̵O̵S̵.̵ ̵T̵h̵a̵t̵ ̵w̵a̵y̵ ̵y̵o̵u̵ ̵a̵v̵o̵i̵d̵ ̵a̵ ̵p̵e̵n̵d̵i̵n̵g̵ ̵u̵p̵d̵a̵t̵e̵ ̵n̵a̵g̵ ̵s̵e̵t̵u̵p̵ ̵s̵c̵r̵e̵e̵n̵ ̵a̵f̵t̵e̵r̵ ̵d̵o̵i̵n̵g̵ ̵t̵h̵e̵ ̵e̵x̵p̵l̵o̵i̵t̵.̵ ̵T̵h̵e̵n̵ ̵e̵n̵a̵b̵l̵e̵ ̵A̵D̵B̵ ̵a̵n̵d̵ ̵u̵n̵k̵n̵o̵w̵n̵ ̵s̵o̵u̵r̵c̵e̵s̵.̵ ̵ After kamakiri I would flash only magisk.zip + sideload the manager app with adb... and avoid any prerooted rom flashing until there is an update to a somewhat higher version (and the current 6.2.6.8v1 has that contact manufacturer error screen).
Edit: Update: meanwhile, the fix for the mentioned 'contact manufacturer' error is known...
Take a look here and here.
Edit/Update: Due to efuses (blocking the bootrom access), it isn't recommended to do any update infront of the unlock...
Sus_i said:
Nice guide
Here are a few thoughts from me...
It's important to use the latest kamakiri. The mentioned prerooted 6.2.6.5 is probably a downgrade. A few sticks needs an update of the TZ in order to play prime video. The TZ update is only in the v1.2 Kamakiri or in the 6.2.6.6 prerooted.
Since the exploit can't be patched, it's in my opinion the best to do the setup at the beginning, pair the remote, then update to the latest over fireOS. That way you avoid a pending update nag setup screen after doing the exploit. Then enable ADB and unknown sources. After kamakiri I would flash only magisk.zip + sideload the manager app with adb... and avoid any prerooted rom flashing until there is an update to a somewhat higher version (and the current 6.2.6.8v1 has that contact manufacturer error screen).
Click to expand...
Click to collapse
Ops Typo let me edit it, I meant to put 6.2.6.8 on the command lol, and aaaa I see I didn't know the exploit couldn't be patched great info, so than yes I will revise my instructions thank so much
UPDATE: I just checked my FS and I'm on 6.2.6.8v1 and didn't receive contact the manufacturer, is it because I sideloaded the manager app after?
nandroidint said:
UPDATE: I just checked my FS and I'm on 6.2.6.8v1 and didn't receive contact the manufacturer, is it because I sideloaded the manager app after?
Click to expand...
Click to collapse
No. If I remember correct, it has something to do with flashing, i.e. the vendor partition wasn't flashed propperly.
Maybe you flashed not the prerooted!? With the Kamakiri TWRP version is flashing full ota update packages (renamed to zip) also possible... and in the prerooted thread is such a full 6.2.6.8 ota linked.
Edit: Could be that this error is prime video related, idk. rbox said he looks into it soon...
Just for clarification: The prerooted rom is a perfect thing since years.
My suggestion 'avoid any rom flashing' from my last post is just an attempt to keep it simple for beginners.
By the way, if the stick gets all updates in front of the unlock, it makes no sense to update it after the unlock again (unless addon.d support is needed).
I hope that has become clear I very much appreciate all the prerooted stuff
thanx for the tut nandroidint this is exactly what I needed, I wasn't sure how to do the shorting so the video helped out a lot now I'm ready to do this. But I'm sorta a noob when it comes to android so I got few questions tho, 1) what are the main benefits in rooting the fIrestick 4K 2) are there different roms to install? 3) are there root only .apks? 4)also one main thing I would like to be able to do is spoofing the Mac address any idea if that's possible?
5)Oh and lastly what OTB cable do you recommend? sorry for all the questions ?
'std::bad_alloc'
After running the adb push of the manthis.zip Im getting terminate called after throwing an instance of 'std::bad_alloc'.... What Im I doing wrong?
i gave root can i remove amazon services
i dont want google launcher jsut remove services
Sooo there’s no way to expand the storage? Even after rooted? Just bought an otg cable ?
Can I please get some support guys ? previous questions I don’t need answered I found someone on twitter who explained a few things but can someone please answer this.
Hello, after root i got massage on screen
: android system
There is na internal problem with Your device. Contact Your manufacturer for detalis.
And when im trying to register in Amazon it bringing me back to pairing screen, farest i can go it is wifi connection.
Did i brick my Stick?
davinci2798 said:
Hello, after root i got massage on screen
: android system
There is na internal problem with Your device. Contact Your manufacturer for detalis.
And when im trying to register in Amazon it bringing me back to pairing screen, farest i can go it is wifi connection.
Did i brick my Stick?
Click to expand...
Click to collapse
Did you deregister before rooting like the tut says? This is why I’ve been hesitant on rooting because of the lack of support on this forum
Yep, it was new Stick, out from box. Not registered at all. I managed massage, but still comminng to pairing screen.
itsyaboy said:
Sooo there’s no way to expand the storage? Even after rooted? Just bought an otg cable
Can I please get some support guys previous questions I don’t need answered I found someone on twitter who explained a few things but can someone please answer this.
Click to expand...
Click to collapse
You can use adoptable storage on 4K stick with Add-Ons installed and activated AFTV-XM Xposed Module. It brings adoptable storage support to Settings UI.
tsynik said:
You can use adoptable storage on 4K stick with Add-Ons installed and activated AFTV-XM Xposed Module. It brings adoptable storage support to Settings UI.
Click to expand...
Click to collapse
Nice! That’s awesome thanx for the info and reply.
davinci2798 said:
Yep, it was new Stick, out from box. Not registered at all. I managed massage, but still comminng to pairing screen.
Click to expand...
Click to collapse
Hey so have you figured out what was the problem yet? If so could u explain how you managed to fix it? I’m going to root sometime this week and would hate to run into this issue.
USB drive for storage
itsyaboy said:
Sooo there’s no way to expand the storage? Even after rooted? Just bought an otg cable
Can I please get some support guys previous questions I don’t need answered I found someone on twitter who explained a few things but can someone please answer this.
Click to expand...
Click to collapse
Yes, You can use a USB drive for App loading and Movie storage.
See Troypoint.com for good video.
I suggest a single USB OTG Cable and a USB HUB for your drive.
Then you can add a Keyboard and Mouse which make it MUCH easier to type commands.
Good Luck
How might one do this on a Mac?
Thanks
gogorman said:
How might one do this on a Mac?
Thanks
Click to expand...
Click to collapse
Do what? The only thing u can do on the MacOS is to create the bootable iso usb, you can follow these steps to do so https://www.google.com/amp/s/www.le...-on-an-apple-mac-os-x-from-an-iso?hs_amp=true
After your create the bootable usb just reboot and hold down option and select the bootable usb, once in open up Firefox and download the kamakiri-mantis-v1 and open a terminal window and change the directory to where u have the kamakiri folder, in terminal type cd then just drop in the kamakiri and hit enter. From there u can just follow the tut, FYI the bootable usb you create is a Linux OS so that’s how you can do it on a Mac, you just can’t do the rooting on MacOS, just clarifying Incase that was your question.
Sorry I haven't rooted phones in a while and am trying to root my fire stick 4k. Can we get some pictures tutorial pretty please
Sent from my ONEPLUS A5010 using Tapatalk
Step by step instructions would be great?
chinkster said:
Sorry I haven't rooted phones in a while and am trying to root my fire stick 4k. Can we get some pictures tutorial pretty please
Sent from my ONEPLUS A5010 using Tapatalk
Click to expand...
Click to collapse
I would love that too, I have rooted with Unix before but that was on a Drone(Solo).
I understand about creating a bootable USB drive and booting my PC/Mac by changing the bios to boot first off the USB as step 1.
Step 2 is loading software onto the USB while booted under Unix/Linux???
Step 3 How do you then connect to the firestick?
When do you plug the firestick into the tv and when do you short out the jumper??
I know to some of you these sound very basic but it would be helpful for those of us just learning this environment.
Thanks in advance...
RPM99 said:
I would love that too, I have rooted with Unix before but that was on a Drone(Solo).
I understand about creating a bootable USB drive and booting my PC/Mac by changing the bios to boot first off the USB as step 1.
Step 2 is loading software onto the USB while booted under Unix/Linux???
Step 3 How do you then connect to the firestick?
When do you plug the firestick into the tv and when do you short out the jumper??
I know to some of you these sound very basic but it would be helpful for those of us just learning this environment.
Thanks in advance...
Click to expand...
Click to collapse
The link he provided explains all that https://forum.xda-developers.com/fire-tv/orig-development/unlock-fire-tv-stick-4k-mantis-t3978459 all except for when to connect to the tv, but I assume it’s after running the kamakiri script, btw it’s not software, you just download the kamakiri mantis while in the Linux usb os, open a terminal and change the directory of the terminal to the kamakiri folder in order to run the ./bootrom-step.sh and ./fastboot-step.sh commands
Edit: just follow the main guide from the link above then read this guide after, that’s the best way to understand it.