This is a CyanogenMod 12.1 ROM for the Exynos3470 based Samsung Galaxy Tab 4 7.0 LTE (T235/T235Y).
DO NOT USE IT FOR T230(NU)/T231 OR YOU WILL BRICK YOUR DEVICE
Although T235 and T230(NU)/T231 (T230:WiFi / T231:3G) share the "Galaxy Tab 4 7.0" name they are not related in terms of hardware due to the different SoCs used (Samsung Exynos3470 vs. Marvell PXA1088).
Hence please do not ask for support or ROMs for the T230(NU)/T231.
Working features
Receiving and making calls
Hardware sensors (Acceleration)
Audio
Bluetooth
Wifi
HW accelerated GUI
MTP storage
GPS
USB-OTG (Mass-Storage, Keyboard, Mouse working, USB-Audio untested)
Camera (pictures+video: Back+Front)
Non-working features:
SELinux
Known issues:
See the Bug Report section of this thread
Disclaimer:
You flash this image at your own responsibility. I am not responsible for any damage that might be caused by flashing this image (bricked device, lost data, ...)
Flashing this kernel image will trigger the KNOX counter, so your warranty will be void.
Applications that use KNOX (e.g. "Private Mode") might not work anymore when returning to the stock ROM, as the device is regarded as compromised. Do not flash this ROM if you need those applications.
The image is only for Tab 4 7.0 SM-T235 and SM-T235Y (Exynos)
It might be instable, crash your device, drain your battery, or even might damage your smartphone
Backup your data before flashing and check if the original firmware is present (e.g. at SamMobile)
Click to expand...
Click to collapse
Before you start:
Backup your data, like call history, contacts, sms, WhatsApp messages, favourite app settings that are on internal and external sd (by using Titanium Backup or other apps available on PlayStore). At least all internal data will be lost in any case. If you have bad luck you might also loose data from your external sd card.
Download:
Odin3-v1.85
TWRP 2.8.7.0 recovery image [09/08/2015] (AndroidFileHost Mirror)
CM 12.1 ROM (AndroidFileHost Mirror)
Google Apps (contains Google Play, ...) for Android 5.1.1 from Jajb (Recommended) or the one that suits you best from Consolidated GApps.
Install recovery:
Reboot your device into Odin mode: turn off your device, then press Volume-Down + Home + Power button at the same time and release them.
Confirm the following warning message with the Volume-Up button.
Connect your device to your PC via USB
Make sure the device driver's are installed on your PC
Start Odin
In Odin select PDA and select the recovery image (recovery.tar.md5)
Check that only "Auto Reboot" and "F. Reset Time" is set
Click on "Start": the kernel image should be flashed now and the device should reboot afterwards. By flashing the recovery, your warranty will be void.
After the recovery flashing process was successful, power of your device. If not restart into Download mode and flash again or flash the stock rom.
Before you flash:
You need the latest TWRP recovery (see links above). Otherwise TWRP might not be able to flash the ROM.
Wipe the device to avoid problems with remaining files from the old installation (see instructions below). This also applies if you already installed an older version of CM 12.1.
Flash CyanogenMod:
Reboot into recovery mode (Press Volume-Up + Home + Power button)
If you come from a stock ROM, this is your opportunity to make a Backup of your phone(Backup, then select Boot, System, Data, then swipe to backup). Note that the recovery might fail to restore the backup when you want to go back to the stock ROM (for me it got stuck after a restore during boot. But the backup was made with a different version of TWRP, so it might work in general) - simply do not expect too much of it at the moment.
If you haven't copied the installation files yet, you can now copy the GApps and CyanogenMod zip to your internal sd or external sd (be careful not to put the files into the data directory of the internal sd card as this will be deleted in the next step). Be sure that MTP is enabled (inside Mounts, click on Enable MTP), then, from your pc, copy the files. If MTP does not work from recovery, try it directly from Android or remove the external sd card from the phone and put it into your PC.
Wipe Dalvik Cache, Cache, System and Data (inside Wipe -> Advanced Wipe). Do not report problems if you did not wipe those partitions as the problems are most probably related to this!
Install the CM 12.1 ROM zip-package
Install the GApps zip-package
Reboot the system and enjoy a Lollipop
How to root:
No SuperSu is needed as CyanogenMod already comes with integrated root support. Root access is disabled by default.
You normally do not need root access. If you want to activate root access for apps, do the following:
Open the Settings menu, select "About Phone"
Tap on the "Build number" entry seven times. You should be notified, that the developer settings are now active.
Open the Settings menu, select "Developer options". Enable root access by selecting "Apps" in the "Root-Access" setting.
In case you want to go back to the stock ROM:
lf you do not have the latest stock ROM you can download it from SamMobile
Reboot your phone into Odin mode
Open Odin on your PC and connect your smartphone with your PC via USB
If you have a zip-file unzip it so that you have a .tar.md5 file
In Odin click on the PDA button and select the .tar.md5 file. Then press "Start".
Normally the stock rom fails to boot as the data from CM12 is still on the data partition. So after flashing the stock rom, reboot into recovery mode (it looks a bit different now). First wipe the data partition, then wipe the cache.
Reboot
Changelog
Code:
09/08/2015:
*Update kernel to T235XXU1AOD1
*Synchronize with newest CM 12.1 sources (contains stagefright patches)
*Fixed black screen on minimal brightness
12/07/2015:
* Charging animation in standby-mode fixed
11/07/2015:
* Update to newest CyanogenMod sources (LMY48G)
* Left touchkey working now (configured as App-Switch button)
* Camera Preview working (saving a picture might still crash)
30/06/2015:
* Image sizes reduced to fix "unable to mount /system" problems
28/06/2015:
* Initial test-build
This section is for developers:
A README file with build instructions can be found here:
https://github.com/cm-3470/patcher_degaslte
Sources:
Code:
https://github.com/cm-3470/android_device_samsung_degaslte
https://github.com/cm-3470/android_vendor_samsung_degaslte
https://github.com/cm-3470/android_kernel_samsung_degaslte
https://github.com/cm-3470/android_device_samsung_smdk3470-common
Developers welcome
Help from other developers is always welcome. See the bug/feature section and this thread to see what is missing. Just give some short info (here in this thread or PM) that you want to work on some issue or feature so that work can be synchronized. Maybe there are also other devs that want to work with you on the same issue.
Knowledge in how the kernel works and good programming skills in C, C++ and Java would be nice but not necessary for all problems. At least you should be able to build the ROM and test your changes yourself but you do not need experience in porting ROMs.
XDA:DevDB Information
[T235][ROM][5.1.1][LMY48G] CyanogenMod 12.1 for T235(Y) [Alpha 09/08/2015], ROM for the Samsung Galaxy Tab 4
Contributors
hennymcc
Source Code: https://github.com/cm-3470
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: TWRP Recovery [version from 09/08/2015]
Based On: CyanogenMod
Version Information
Status: Alpha
Created 2015-06-29
Last Updated 2015-09-24
i've tried to test the rom but i can't install so far... i've wiped all but it said it can't mount system again...
http://www.mobosdata.com/samsung-galaxy-tab-4-7-0-lte-sm-t235y
According to this the SM-T235Y is based on Marvel cpu vs exynos on the sm-t235
Does anyone really know the differences ? On another page i read the sm-t235y has a snapdragon 400 ...
Hectic confusing samsung numbering + different devices with same model name .
@hennymcc
do you have included selinux_defconfig in your twrp kernel?
androidboot.selinux=disabled at twrps kernel cmd line should be removed
i wiped system and all partitions using your new twrp but when i install the zip file then /system becomes unmountable
/system is formated ext4
should i try to format it f2fs ?
interstellar22 said:
i wiped system and all partitions using your new twrp but when i install the zip file then /system becomes unmountable
/system is formated ext4
should i try to format it f2fs ?
Click to expand...
Click to collapse
any marvell devices will not work with this or any other custom rom.
sub77 said:
any marvell devices will not work with this or any other custom rom.
Click to expand...
Click to collapse
this is an exynos device not marvell
and now for some reason i cant restore the backup i made
i tryed restorng the backup with twrp 2.8.6.0 recovery from this thread and the 2.8.1.0 from the other.
one gives boot animation loop and the other is stuck at boot
hennymcc said:
In case you want to go back to the stock ROM:
lf you do not have the latest stock ROM you can download it from SamMobile
Click to expand...
Click to collapse
Stock Roms on Android File Host (quicker, free-er host site than Sammobile)
@interstellar22 did you try wiping cache after you restored, before you booted?
thisisapoorusernamechoice said:
Stock Roms on Android File Host (quicker, free-er host site than Sammobile)
@interstellar22 did you try wiping cache after you restored, before you booted?
Click to expand...
Click to collapse
i tryed once without wiping cache, but i had cache backed up also
then i tryed to do a factory reset
still stuck at bootlogo
and adb logcat and adb devices shows nothing
sub77 said:
@hennymcc
do you have included selinux_defconfig in your twrp kernel?
androidboot.selinux=disabled at twrps kernel cmd line should be removed
Click to expand...
Click to collapse
The default selinux setting is enforced. As the selinux configuration files are not complete, Android would not boot.
Setting androidboot.selinux=permissive might work, but when I tested this setting on my S5 mini, it was rather unstable for some reason.
interstellar22 said:
http://www.mobosdata.com/samsung-galaxy-tab-4-7-0-lte-sm-t235y
According to this the SM-T235Y is based on Marvel cpu vs exynos on the sm-t235
Does anyone really know the differences ? On another page i read the sm-t235y has a snapdragon 400 ...
Hectic confusing samsung numbering + different devices with same model name .
Click to expand...
Click to collapse
sub77 said:
any marvell devices will not work with this or any other custom rom.
Click to expand...
Click to collapse
interstellar22 said:
this is an exynos device not marvell
Click to expand...
Click to collapse
T235 and T235Y definitely use Exynos 3470 SoCs. Here an extract from the T235Y default.prop:
Code:
ro.product.model=SM-T235Y
ro.product.name=degasltezt
ro.product.device=degaslte
ro.product.board=universal3470
ro.chipname=exynos3470
The default.prop file of the T235 is similar, only that the product name is degasltexx.
Marvell's PXA1088 SoC is used in the T230/NU which is the non-LTE (WiFi-only) variant of the Tab 4 7.0.
Marvell's PXA1088 and Samsung's Exynos3470 are totally different and have nothing in common (except an ARM core), the same applies to Qualcomm's Snapdragon. There are many websites that mention wrong SoC names as Samsung's naming scheme is rather confusing.
The same applies to the S5 Mini: G800F/M/Y -> Exynos3470, G800H -> Qualcomm Snapdragon.
corneo said:
i've tried to test the rom but i can't install so far... i've wiped all but it said it can't mount system again...
Click to expand...
Click to collapse
Code:
Info: format successful
I:mkfs.f2fs -t 1 /dev/block/mmcblk0p18 process ended with RC=0
Done.
Why was the system partition formatted with f2fs? The default file system is ext4.
The TWRP partition table is hardcoded to ext4 so that's probably the reason for these lines:
Code:
E:Unable to mount '/system'
I:Actual block device: '/dev/block/mmcblk0p18', current file system: 'ext4'
Could you reformat it with ext4?
interstellar22 said:
i tryed once without wiping cache, but i had cache backed up also
then i tryed to do a factory reset
still stuck at bootlogo
and adb logcat and adb devices shows nothing
Click to expand...
Click to collapse
Did you flash the stock ROM with Odin?
And afterwards wipe the data partition and then the cache with the _stock_ recovery (as TWRP is not available after flashing the stock ROM)?
interstellar22 said:
i wiped system and all partitions using your new twrp but when i install the zip file then /system becomes unmountable
/system is formated ext4
should i try to format it f2fs ?
Click to expand...
Click to collapse
Short summary:
interstellar22 and corneo tried it so far and both got the error message "/system unmountable"
Strange that corneo was able to generate an error log.
@corneo: did you create the log with adb?
At least according to corneo's log, it seams that after the F2FS format the partition is reformatted with EXT4 afterwards:
Code:
Formatting system using make_ext4fs function.
It also says:
Code:
erasing 588800 blocks
blkdiscard failed: Invalid argument
writing 134395 blocks of new data
lseek64 failed: Invalid argument
I:Legacy property environment disabled.
E:Error executing updater binary in zip '/external_sd/cm-12.1-20150627-UNOFFICIAL-degaslte.zip'
Error flashing zip '/external_sd/cm-12.1-20150627-UNOFFICIAL-degaslte.zip'
Not that sure about what causes this error. Maybe the partition sizes have to be changed.
hennymcc said:
Short summary:
interstellar22 and corneo tried it so far and both got the error message "/system unmountable"
Strange that corneo was able to generate an error log.
@corneo: did you create the log with adb?
At least according to corneo's log, it seams that after the F2FS format the partition is reformatted with EXT4 afterwards:
Code:
Formatting system using make_ext4fs function.
It also says:
Code:
erasing 588800 blocks
blkdiscard failed: Invalid argument
writing 134395 blocks of new data
lseek64 failed: Invalid argument
I:Legacy property environment disabled.
E:Error executing updater binary in zip '/external_sd/cm-12.1-20150627-UNOFFICIAL-degaslte.zip'
Error flashing zip '/external_sd/cm-12.1-20150627-UNOFFICIAL-degaslte.zip'
Not that sure about what causes this error. Maybe the partition sizes have to be changed.
Click to expand...
Click to collapse
i've created the log in recovery and copied it to sd.
now i flashed the tab again with odin and try it again. same issue...
Gesendet von meinem One M8
i managed to get the original firmware back with odin
could it be that the system.new.dat file is corrupted ?
i had formated system with ext4 then did the update and was still getting unable to mount /system afterwards
so most probably the system.new.dat file has some problems or i have no idea why i cant mount /system afterwards
Maybe it is caused by wrong BOARD_...IMAGE_PARTITION_SIZE values in BoardConfig.mk.
Could you please post the contents of /proc/mounts and /proc/partitions:
Code:
cat /proc/mounts
cat /proc/partitions
The above should be performed from the stock ROM. The device must be rooted.
Hmm, the problem might be here:
Code:
Patching system image unconditionally...
blockimg version is 2
erasing 588800 blocks
blkdiscard failed: Invalid argument
writing 134395 blocks of new data
lseek64 failed: Invalid argument
588800 * 4096 = 2411724800 bytes (2,2GB)
This is the value of the BoardConfig.mk taken from the S5 Mini (BOARD_SYSTEMIMAGE_PARTITION_SIZE := 2411724800).
But the system partition is only 2233466880 bytes:
Code:
/system | /dev/block/mmcblk0p18 | Size: 2096MB Used: 1828MB Free: 268MB Backup Size: 1828MB
Code:
I:wipe_path '/system'
Formatting System using make_ext4fs function.
Creating filesystem with parameters:
Size: 2233466880
The system.img itself is only 500MB in size. So I guess reducing the image size should fix the problem.
An updated ROM is available. The image sizes have been reduced. I hope this fixes the problems with the system-partition.
Also use the new TWRP recovery as the partition sizes might be hardcoded in the old one.
good news! new recovery and system image works! very smooth so far, searching for bugs now. the only one i found are the extended settings option. it doesn't work but thats no problem for me. thank you very much!
Gesendet von meinem One M8
Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android N (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed.
This rom is for the Nook Tablet 1GB/16GB versions. The device code name is "acclaim".
Prerequisites:
A recovery. To install a recovery when coming from a stock device, you need to prepare a special SD card. Installation instructions can be found here on xda.
Installation:
Android N requires more space on the system partition. To load the Google Apps, it is necessary to repartition the device.
To repartition, flash the recovery partition that can be found here with fastboot:
https://basketbuild.com/filedl/devs...ery-repartition-acclaim-cm14.1-UNOFFICIAL.img
Boot into this recovery and select "Advanced->Repartion Nook Tablet for Android N".
The screen turns black for a minute or so and the repartitioning is happening.
Then select "Advanced->Reboot recovery" to reboot into recovery again.
NOTE: Repartioning will delete all data. BACKUP! It also deletes the legacy internal EMMC partition (which was 1GB big) in case this was not yet done.
NOTE2: If repartitioning fails, please adb into the device and post /tmp/repartition.log to the forum here.
Then you can flash the CM 14.1 images and gapps as usual (e.g. with adb sideload).
Once a version is installed (and all bugs fixed), you will be able to use CM Updater
Settings->About tablet->CyanogenMod updates->Refresh
Building:
The CM wiki explains that here: http://wiki.cyanogenmod.org/w/Build_for_acclaim
Returning to stock BN firmware:
If you have installed above rom and the recovery and you really hate it and want to go back to stock, you first have to repartition to come back to the original repartition layout. This is currently not documented.
You may wish to try to flash the original acclaim_update.zip from BN. You have to unzip that file and edit META-INF/com/google/android/updater-script. Drop the first two lines here:
assert(getprop("ro.product.device") == "blaze" ||
getprop("ro.build.product") == "blaze");
Zip the package again. Then go to recovery, flash the zip, wipe, and reboot.
Support:
For any issues encountered, please post into this forum, but add steps to reproduce and dmesg, logcat and audit.log information. If you don't know what this is or how to get them, try to find that out first before posting here.
Thanks:
hashcode, ntemis, kuzma30, fattire, mik_os, and many others that contribute to cyanogenmod and especially this version.
kuzma30 - great kernel job
hashcode - we have reused lots of your work and effort for the various omap devices (esp kindle fire). It is thanks to you mainly that we are now official CM device. Also many thanks for the L bringup help.
mik_os - great touchscreen firmware flasher and other efforts
fattire - for helping us everywhere he can
ntemis - thanks for giving so much energy to this - esp for 4.4 and L I have copied lots of things from you
CM community (stargo, david marble, etc.) - thanks for replying to all my questions!
DISCLAIMER:
- update the recovery (see above) if you come from older versions - otherwise you'll see funny error messages when installing zip
- It is possible that you need to wipe your device. I did not do that, but...
- You must flash your own gapps. It can be found somewhere....
Known issues:
- the touchscreen firmware flasher doesn't work on N. Use CM11 to flash it first.
- The system is altogether not really the fastest thing on earth
Get it soon from:
http://download.cyanogenmod.org/?device=acclaim
Get an UNOFFICIAL build now from here:
https://basketbuild.com/filedl/devs...ry/cm_acclaim_cm-14.1_13112016_UNOFFICIAL.zip
8GB model: I do not have such a device and can thus not test anything. The re-partitioning should also work, as I have created the last partition userdata with the "everything that's left in terms of size".
If you feel adventurous, please let me know if the 8GB model works as well, but it's currently not supported.
Oh my god, dude, you're still going
It's the tablet that won't die!
I flashed the recovery recovery-repartition-acclaim-cm14.1-UNOFFICIAL.img and I don't get any menu under advanced.
I ran repartition.sh in an adb shell under recovery. The partitions resized nicely.
I reflashed twrp 3.02 and failed to recover my backup. Data and cache were formatted as ext4. I fixed that in twrp and recovered my backup. I then failed to flash a rom. It errored immediately. I think the system was the wrong size. Testing with smaller (but increasing) system partition sizes shows that your defaults are correct. System is exactly 2G. I have no idea why I had troubles. I probably slipped a bit in my non-eec ram.
Very good work. I don't know why the repartition.sh script isn't run from the recovery. That is built from a slightly different device tree. I can post repartiton.log if you need it. It looked fine.
This is actually a useable tablet with this rom. Encore and, I assume the 8gb acclaim, just haven't worked well since cm-11 since they only have 512M ram. You have done a good job keeping this alive.
drmarble said:
I flashed the recovery recovery-repartition-acclaim-cm14.1-UNOFFICIAL.img and I don't get any menu under advanced.
I ran repartition.sh in an adb shell under recovery. The partitions resized nicely.
I reflashed twrp 3.02 and failed to recover my backup. Data and cache were formatted as ext4. I fixed that in twrp and recovered my backup. I then failed to flash a rom. It errored immediately. I think the system was the wrong size. Testing with smaller (but increasing) system partition sizes shows that your defaults are correct. System is exactly 2G. I have no idea why I had troubles. I probably slipped a bit in my non-eec ram.
Very good work. I don't know why the repartition.sh script isn't run from the recovery. That is built from a slightly different device tree. I can post repartiton.log if you need it. It looked fine.
This is actually a useable tablet with this rom. Encore and, I assume the 8gb acclaim, just haven't worked well since cm-11 since they only have 512M ram. You have done a good job keeping this alive.
Click to expand...
Click to collapse
I re-downloaded and flashed the recovery from here: https://basketbuild.com/filedl/devs...ery-repartition-acclaim-cm14.1-UNOFFICIAL.img
and I can see when I enter the Advanced menu, a new menu entry: Repartition Nook Tablet for Android N.
Strange.
Chris
Building CM14?
chrmhoffmann said:
...
Building:
The CM wiki explains that here: http://wiki.cyanogenmod.org/w/Build_for_acclaim
...
Click to expand...
Click to collapse
CM14 on this device!? Awesome!
Is there a special local manifest that I need to build this?
It has been a while, but for CM13, I did this:
rm -f $CROOT/.repo/local_manifest.xml
echo '<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<project name="TheMuppets/proprietary_vendor_bn" path="vendor/bn" remote="github" revision="cm-13.0" />
</manifest>' > $CROOT/.repo/local_manifest.xml
repo init -u git://github.com/CyanogenMod/android.git -b cm-13.0
repo sync -j1Can I just change cm-13.0 to cm-14.1?
Also, is this a resource pig like building CM14 for the NookHD+? I had to give my virtual machine 12GB RAM and 4 CPUs because of the new toolchain, notably Jack.
And thanks for the great work!!
== EDIT ==
I forked my CM13 script, made the changes above, and got a build! cm-14.1-20161119-UNOFFICIAL-acclaim.zip
Unfortunately, it wouldn't flash and gave an ERROR 7 error code. :crying:
I installed and flashed with TWRP 3.0.1, and was able to successfully re-flash CM13. I'll try building and installing CM14 again in a week or so.
Question, do I have to re-partition if I don't intend to install Gapps?
I flashed "recovery-repartition-acclaim-cm14.1-UNOFFICIAL.img" and then entered into it. After I did "Advanced->Reboot recovery". And when I had reboot into the recovery I got "No command" on the black screen. Help me.
AlexBreems said:
I flashed "recovery-repartition-acclaim-cm14.1-UNOFFICIAL.img" and then entered into it. After I did "Advanced->Reboot recovery". And when I had reboot into the recovery I got "No command" on the black screen. Help me.
Click to expand...
Click to collapse
I did the repartitioning on a 16GB also, and got the same result. rebooting into recovery and get the "no command"prompt only.
I rebooted to cyanoboot, started fastboot, and flashed a TWRP recovery
using the command "fastboot flash recovery twrp-3.0.2-0-acclaim.img" (no quotes)
partitons didn't appear formatted so I formatted /data f2fs , /cache ext4 and /system /ext4
haven't tried installing the rom yet, will do in a minute
partitions look like this after formatting
busybox df -h
Filesystem Size Used Available Use% Mounted on
tmpfs 333.9M 20.0K 333.9M 0% /dev
tmpfs 333.9M 28.0K 333.9M 0% /tmp
/dev/block/platform/omap/omap_hsmmc.1/by-name/bootdata 47.2M 4.5K 47.2M 0% /bootdata
/dev/block/mmcblk0p9 1007.9M 17.3M 990.6M 2% /cache
/dev/block/mmcblk0p8 2.0G 35.0M 1.9G 2% /system
/dev/block/mmcblk0p10 11.1G 652.0M 10.4G 6% /data
/dev/block/mmcblk0p10 11.1G 652.0M 10.4G 6% /emmc
I'll try an 8GB tomorrow
!!! RENAME THE ATTACHED ZIP FILE TO IMG - its not a ZIP !!!
mikeataol said:
I did the repartitioning on a 16GB also, and got the same result. rebooting into recovery and get the "no command"prompt only.
I rebooted to cyanoboot, started fastboot, and flashed a TWRP recovery
using the command "fastboot flash recovery twrp-3.0.2-0-acclaim.img" (no quotes)
partitons didn't appear formatted so I formatted /data f2fs , /cache ext4 and /system /ext4
haven't tried installing the rom yet, will do in a minute
partitions look like this after formatting
Click to expand...
Click to collapse
You beat me to it. I flashed TWRP changed the partition format for /cache /data and /system to f2fs. I then changed the partition format for /cache /data and /system to ext4. I then flashed the ROM from within TWRP. I was able to boot successfully after that.
I have flashed "cm-13.0-20161113-NIGHTLY-acclaim-recovery.img" and then by the new recovery I have flashed "cm-14.1-20161119-NIGHTLY-acclaim.zip". Profit!
All files are located here https://download.cyanogenmod.org/?device=acclaim
Hi Chris,
after flashing the nightly, just providing feedback on things I noticed
Performance is very good.
Like many CM13 roms, if you've loaded GAPPS, initial setup doesn't like skipping through actually using WiFi and providing an account... It gets into a loop until you provide those things.
Screen artifacts seem pretty persistent, tried changing things like turning off LiveDisplay, developer settings for Disable HWoverlays and ForceGPUrendering didn't seem to have any effect.
CMBugreporter app gives random FC. MTPHost gives random FC (Ive seen this on other CM based recent roms as well...)
WiFi went into a "no Internet" randomly more than once, (no issues on other tablets and computers on the same LAN at the same time.)
I'm not wild about the partition sizes chosen with the repart script (1GB for cache , 2GB for system) , seems like they could be smaller, especially cache.
Didn't look at the whole rom in great detail, really... just noting what people might expect if they try this rom.
Thanks for keeping it alive and in the mainstream CM loop!
M
Working build!!
Great work @chrmhoffmann, @drmarble et al!
I reverted the partition sizes back to the CM13 sizes and built a working ROM without needing re-partitioning. My tablet only has two or three apps and is (importantly) used as my "clock radio".
I'll be back! ... for "O"
Thanks.
chrmhoffmann said:
8GB model: I do not have such a device and can thus not test anything. The re-partitioning should also work, as I have created the last partition userdata with the "everything that's left in terms of size".
If you feel adventurous, please let me know if the 8GB model works as well, but it's currently not supported.
Click to expand...
Click to collapse
Hi Chris,
It does install and run on the 8GB model, although it is very laggy and slow. I tried as much as one could to try to speed it up but its not nearly as usable as on the 16GB.
The repart script behaved the same way, got a "no command" on reboot to recovery and had to format the partitions before installing.
I did format /cache and /data f2fs on the 8GB install... I'll try ext4 and see if it behaves any better.
I did not notice the screen artifacts using the 2nd 1122 build that's on the CM download site....
Thanks again.
mikeataol said:
Hi Chris,
It does install and run on the 8GB model, although it is very laggy and slow. I tried as much as one could to try to speed it up but its not nearly as usable as on the 16GB.
The repart script behaved the same way, got a "no command" on reboot to recovery and had to format the partitions before installing.
I did format /cache and /data f2fs on the 8GB install... I'll try ext4 and see if it behaves any better.
I did not notice the screen artifacts using the 2nd 1122 build that's on the CM download site....
Thanks again.
Click to expand...
Click to collapse
I just ran into a similar issue but with the 16gb version. I fastboot flashed my recovery back to TWRP 2.8.7.0 and formatted /cache and /data to ext4 and it seems to be working now.
The link for the partitioning recovery seems to be down, does anybody have an alternate link? Will the official recovery get the partitioning function added?
Thanks!
lipps said:
The link for the partitioning recovery seems to be down, does anybody have an alternate link? Will the official recovery get the partitioning function added?
Thanks!
Click to expand...
Click to collapse
the download site is showing "unplanned maintenance, so here ya go...
rename this fie to .IMG... it's not a ZIP (renamed to allow uploading here)
mikeataol said:
the download site is showing "unplanned maintenance, so here ya go...
rename this fie to .IMG... it's not a ZIP (renamed to allow uploading here)
Click to expand...
Click to collapse
Thanks for the file! I changed the extension to .img, then flashed it to recovery using TWRP. When I reboot into recovery, I just get a message in very small text that says "No command"and every few seconds the screen flashes to a mottled white screen, then right back to "No command".
I also tried flashing the image with fastboot, same results. Any idea what I'm doing wrong?
lipps said:
Thanks for the file! I changed the extension to .img, then flashed it to recovery using TWRP. When I reboot into recovery, I just get a message in very small text that says "No command"and every few seconds the screen flashes to a mottled white screen, then right back to "No command".
I also tried flashing the image with fastboot, same results. Any idea what I'm doing wrong?
Click to expand...
Click to collapse
If you read the posts in this short thread , you will see others with the same result.
you need to flash TWRP now and format the partitions in TWRP . They have been resized, but not formatted
you should reboot to recovery after formatting , and before flashing the rom and gapps
mikeataol said:
If you read the posts in this short thread , you will see others with the same result.
you need to flash TWRP now and format the partitions in TWRP . They have been resized, but not formatted
you should reboot to recovery after formatting , and before flashing the rom and gapps
Click to expand...
Click to collapse
Thanks for continuing to help me out Mike. Do I need to re-partition using ADB, or does TWRP have that functionality? If it does, I don't see it.
I found this post about re-partitioning using ADB, is it something close to what I need to do?
http://forum.xda-developers.com/showpost.php?p=22157605&postcount=25
Thanks!
[Guide] Samsung Galaxy S2 i9100 Android 7.1 Nougat/Lineage OS 14.1
[Guide/Tutorial/Howto] Samsung Galaxy S2 i9100 Any version to Android 7.1 Nougat without PC
This detailed step-by-step guide helps you transform your Samsung Galaxy S2 i-9100/i-9100P to a powerful one with Android 7.1 Nougat.
Verify your phone is i9100 or i9100P before going further : when you Power on phone, it is written Galaxy SII i9100.
The flashing of recovery is a bit tricky but none of the S2 I had were recognised by the PC. So this tutorial is PC free.
If your S2 is recognised by PC, it's easier to flash directly TWRP recovery using Odin or Heimdall https://forum.xda-developers.com/showpost.php?p=75002977&postcount=343
CHANGELOG OF TUTORIAL
v10. Updated pack with TWRP 3.3.1-0
v9. Updated to Unofficial LOS 14.1
v8. Removed Dorimanx kernel (not maintained)
v7. Added Google Play certification (use instructions with my v5 pack below)
v6. Switched to Dorimanx kernel, swteaks, enhenced tutorial thx to feedback, introduced md5 signatures, Stweaks included
v5. Overclock and optimize
v4. Simpler repit, 2 profiles for repit included
v3.5. More custom partitions, kernel for Android N 1.3
v3. Moved to Lineage OS 14.1, Skyline custom kernel, TWRP 3.1 by the.gangster
v2. Added latest repit, added walkthrough for possible errors
v1. Initial release
1 ) DOWNLOAD ---------------------
- djibe Galaxy S2 i9100 pack (53 MB) v5 : http://bit.ly/GalaxyS2djibepackv5
(contains Philz Touch recovery + kernel Lanchon IsoRec CM13 + the.gangster IsoRec TWRP 3.3.1-0 recovery + lanchon repit djibe edit standard or prefered + Su for LOS 14.1 + Samsung drivers).
- ROM Unofficial Lineage OS 14.1 for GalaxyS2 i9100 : https://androidfilehost.com/?w=files&flid=302540&sort_by=date&sort_dir=DESC
Or AOKP : https://forum.xda-developers.com/galaxy-s2/development-derivatives/rom-aokp-rom-t3606915
- OpenGApps ARM 7.1 pico (alternatives: Pico, Micro) : https://opengapps.org/?arch=arm&api=7.1&variant=pico
- a microSD card. Copy Philz Touch recovery + kernel Lanchon IsoRec CM13 + the.gangster IsoRec TWRP 3.3.1-0 recovery + lanchon repit djibe edit standard or prefered + Su for LOS 14.1 AND THEIR RESPECTIVE md5 files from my pack on microSD card and insert it in phone.
- Charge phone to 100 %
WARNING. Read carefully the sentences starting with ###.
### It will not work if your phone is encrypted. Uncrypt it before starting this tutorial.
### This tutorial works without a PC. So it will work if (like me) you get "Unknown USB device error" message when plugging phone in Windows.
### Warranty is now void.
### Later in this tutorial, if you get error : "Failed to mount */data* (No such device)", just reformat Data partition to Ext4 (Using lanchon-repit's script or TWRP recovery).
2 ) BACKUP DATA -------------------
Install Samsung drivers (you unzipped earlier).
Then plug phone to PC in File transfer mode.
Collect all .jpg or .mp4
Use an app like Backupyourmobile to backup texts, contacts, etc.
Check that backup is located on microSD card.
Then copy the backup on your PC.
3 ) FLASH RECOVERY, KERNEL AND RE-PARTITION----------------
We gonna repartition phone to reduce an unused preload partition of 512 Mo (stored Samsung updates that no more exist).
We gonna increase system partition to 1 GB so Android 7.1 and Gapps have enough space.
We gonna increase data partition so you can have all the apps you like.
ALL YOUR DATA WILL BE LOST.
FLASH RECOVERY FROM STOCK RECOVERY ----
Shut down phone.
Power it back on in recovery mode : Use Volume+ + Home + Power buttons and release them when you see Galaxy S2 logo.
### Alternative and easier process if your S2 can be recognized by PC using Heimdall : https://forum.xda-developers.com/showpost.php?p=75002977&postcount=343
Then wait till the recovery launches.
### If you already have a custom recovery, go to the mark -!-!- below.
Using default recovery, use volume buttons to navigate and power to confirm,
install zip -> choose Philz_touch_6.48*.zip and install it.
When its done, shut down phone, restart in recovery mode. You are now in the Philz touch recovery.
### If it fails, you need to install CWM recovery using Odin software and SGS2 in Download mode.
### Use a good tutorial for Odin and SGS2 i9100 recovery flashing.
### Download CWM for Odin : https://www.androidfilehost.com/?fid=95916177934516900
### Once finished, continue operations below as if you had Philz recovery.
In Philz touch recovery (or your recovery -!-!-) : go to Wipe -> format /cache and format /system partitions.
Then back to install zip -> Flash kernel-lanchon*.zip (FLASH IT OR TWRP RECOVERY WON'T LAUNCH AND PHONE WILL BE BRICKED),
then flash recovery recovery-the.gangster-IsoRec-TWRP-3.1.0-0-i9100.zip.
Reboot phone to recovery again, it is now TWRP 3.1.0-0 Recovery !!!
Swipe to unlock filesystem.
Check never show this screen during boot again and swipe again.
In TWRP, go to Backup -> select Boot, System, Data,
Tap select Storage and select External storage,
then Swipe to Backup.
Backup is located on your microSD in the TWRP folder.
(To have latest TWRP recovery, go to Install > Select TWRP 3.1.1-0.img and swype to flash).
### Don't flash repit files if you don't have a TWRP recovery
### 2 MAIN CONFIGS TO REPARTITION :
- For standard config, just use the djibe-standard-repit*.zip included in my archive, you'll have :
1GB system, 6GB data (for apps), max internal storage (photos, temp files) and minimal preload (useless partition used for OTA offical updates).
- My PREFERED version is djibe-prefered-repit*.zip :
1GB system, 2GB Internal storage (limited size for photos and files because who takes photos with SGS2 ?), max data (about 11,5 GB for apps), minimal preload (useless partition).
### And a failproof repit one. If you get flash errors with repit files above, use this one.
- For more custom partitions, ask us in a post what partition sizes you want.
### Let the lanchon*.zip filename AS IS because the filename gives the instructions for the repit script. Lanchon is smart !
Go back to TWRP Home screen,
Plug phone to charger.
Tap go to Install, select lanchon-VERSIONYOUWANT-djibe-repit*.zip from your microSD (if file not seen, tap Select storage -> External-storage),
then Swipe to flash. There is an error, files have been copied to /tmp folder. It is normal !
Go back to Install -> Select Storage -> Internal Storage, OK.
Now tap on : (Up A Level),
scroll down and enter the "tmp" folder,
### If you use another PIT file to repartition (not mine -djibe-version), plug phone to Power source (not PC !) or you could hard brick your device.
tap on lanchon-VERSIONYOUWANT-djibe*.zip and Swipe to flash.
### never connect phone to PC during repit !!!
Let it process for 2 minutes.
4 ) Wipe partitions
INFO : F2FS is the fastest filesystem for read and write partitions on flash memories. Compared to EXT4, gain is from 15 to 280 %.
No need to format the /System partition because it is Read only and Ext4 is still faster.
Format has been done with repit. No need to manually format anymore.
Go to Wipe -> Advanced wipe,
select Dalvik, Cache, System, Data, Internal Storage then Swipe to Wipe, go back to TWRP Home.
5) INSTALL ROM, GAPPS AND ROOT
Still under TWRP Home screen -> go to Install zip and set Storage to External-Storage.
We need to install files 1 by 1.
Select lineage-14.1-*.zip and Swipe to flash,
Then select addonsu-*.zip (this is the Root) and Swipe to flash,
### You get this error : Updater process ended with signal: 4, Error installing zip file '/sdcard/Download/addonsu*.zip', don't care, root is correctly installed.
then open_gapps-arm-7.1*.zip, and Swipe to flash,
### If you are using ResurrectionRemix, don't flash any custom kernel at all !
Then wipe cache/dalvik,
then reboot system.
Wait for 15 minutes while Android starts for the first time.
6 ) ROOT ACCESS
Once in Android, open the Settings menu, select "About Phone".
Go to Settings -> About -> Hit 7 times on the build number, go back,
Go to the Developer options menu, root access -> activate ADB+apps
and Lower activate Local Terminal.
7) CALIBRATE BATTERY
In Google Play Store, download App Battery Calibration (from IMobS Ltd).
Launch the App.
Confirm root acces.
Plug tab and wait till charge hits 100%, then hit BATTERY CALIBRATION and unplug it.
8) You can use Backupyourmobile to restore data,
you can use GPS Status & Toolbox app to enhance GPS fix.
Enjoy,
djibe
THANKS --------------
Teams of : TWRP, Lineage OS, the.gangster, Lanchon, Resurrection remix, Philz, Skyline, MigoMujahid
Hi, i tried that, the repit file i isntalled was the one that has your name. The whole process went ok, except for the install. please check the image for more info.
I formated cache and data partition back to ext4 and everything went fine. Now I have ressurection remix 7.1 ROM.
hi octaviojss:
- Why did you flash my PIT, cause you got the WARNING. If you got "ERROR: 1 Fatal: file system errors in partition #11 'sdcard' (UMS) could not be fixed error" ?
- What happens if you go back to Wipe -> Advanced Wipe
And reformat every partition (F2FS for cache and data and ext4 for system and internal storage) ?
Keep in touch
Why did you have your PIT file there in first place, if it wasnt needed? I installed it because it was more recent. Anyway, as said, when i reformated the cache and data partitions back to ext4 file format i was able to install the rom smoothly and flawlessly.
Glad you did it !
For the PIT file it doesn't change much, but the original lanchon PIT moves data during partition resize, mine erases data.
Enjoy
I get an error "E: error in /tmp/sideload/package.zip" Please help me fix this
Aly Rezz said:
I get an error "E: error in /tmp/sideload/package.zip" Please help me fix this
Click to expand...
Click to collapse
Hi Aly, at which step are you ?
Did you try reflashing the PITs from the SDcard and moving back to Internal stroage main folder ?
Did you authorize TWRP to mount system partition ?
djibe89 said:
Hi Aly, at which step are you ?
Did you try reflashing the PITs from the SDcard and moving back to Internal stroage main folder ?
Did you authorize TWRP to mount system partition ?
Click to expand...
Click to collapse
I wiped my phone and flashed the Philz Touch Recovery Zip. I got this error while flashing it...
Aly Rezz said:
I wiped my phone and flashed the Philz Touch Recovery Zip. I got this error while flashing it...
Click to expand...
Click to collapse
So you've wiped everything under stock recovery ? It needs to be done later once Philz touch is working !
So, we'll try flashing recovery in Download Mode (Home + Power + Volume-), use Odin to flash Philz Touch recovery in .tar format (in AP/PDA section of Odin).
1 - Download Philz Touch recovery in .tar format :
https://mega.nz/#F!oZ1QDDbC!Ko20UNhowwIlXLVFjJsyKw (it doesn't load for me right now)
+ Odin 3.07 (my pack for i9300) : http://bit.ly/2hqiWsP
2 - From my tutorial here, execute the 3rd chapter with Odin :
https://forum.xda-developers.com/galaxy-s3/help/guide-tutorial-samsung-galaxy-s3-i9300-t3491788
(do not flash TWRP inside my i9300 Archive)
3 - Once flash of Philz touch recovery is done, reboot to recovery and continue further steps.
good to have a full tutorial
Glad it pleases you. Hope your S2 is now fully unleashed
Any constructive comment is welcome to enhence the tutorial.
djibe89 said:
So you've wiped everything under stock recovery ? It needs to be done later once Philz touch is working !
So, we'll try flashing recovery in Download Mode (Home + Power + Volume-), use Odin to flash Philz Touch recovery in .tar format (in AP/PDA section of Odin).
1 - Download Philz Touch recovery in .tar format :
https://mega.nz/#F!oZ1QDDbC!Ko20UNhowwIlXLVFjJsyKw (it doesn't load for me right now)
+ Odin 3.07 (my pack for i9300) : http://bit.ly/2hqiWsP
2 - From my tutorial here, execute the 3rd chapter with Odin :
https://forum.xda-developers.com/galaxy-s3/help/guide-tutorial-samsung-galaxy-s3-i9300-t3491788
(do not flash TWRP inside my i9300 Archive)
3 - Once flash of Philz touch recovery is done, reboot to recovery and continue further steps.
Click to expand...
Click to collapse
Still doesn't work. It's stuck at " Nand Write Start!!"
Try Odin 1.3
or this "Tried to do a rollback from official 4.4.2 to official 4.1.2 via Odin.
Since the new official bootloader doesn't allow rollback procedures, I got the missing magic string error and the NAND write fail at Odin.
The tablet bricked, not even showing Samsung Note 10.1 logo. I could only access to ODIN mode, not recovery even. *YIKES*
After a day and a half trying to recover it, I removed the SIM card, the SD card and I loaded the Samsung Stock recovery file via ODIN, then rebooted. I got as far as the Samsung logo which was an improvement compared to what I had. Then I proceeded to reload the 4.4.2 firmware (INU-N8000XXUDNE6) and rebooted the device. Went into recovery mode, restored factory defailts and, voilá!
It is working now on 4.4.2, though it is not the Spanish firmware it shoud be, at least the tablet is functional. "
Hi.
Oh boy I was happy when I found this complete package with all files in a zip. All other places the files are missing or you "can't find them".
And oh boy I was unhappy when I couldn't install the first file.
My phone is a SGS2 Modelnumber GT-I9100 bought in Sweden a few mounth after the model was released.
So I guess the instructions on this page should work for me?
I've rooted my phone with CWM-SuperSU-v0.97.zip and verified with a root checking app from the store. Otherwise it's only updated to the latest Andorid 4.1.2 from Samsung. The phone is working fine with the installed Android version.
So when I choose to install "Philz_touch_6.48*.zip" the following is printed out:
################
PhilZ Touch Recovery
Full Touch CWM Based
+
Advanced Features
Phone i9100
################
This package is for 'galaxys2.i9100.GT-I9100.GT-
I9100M.GT-I9100P,GT-I9100T,SC-02C devices; this
is a ''.
E:Error in /tmp/sideload/package.zip
(Status 7)
What am I doing wrong here? Have I missed doing something obvious? Do I need to install something more before I use your guide?
BR
Tobbe
Hello,
you are rooted.
So, in Android, what happens if you download the app ROM Manager : https://play.google.com/store/apps/details?id=com.koushikdutta.rommanager ,
grant Root access for the app,
Flash latest ClockworkMod Recovery for i9100,
reboot to recovery, reflash Philz Touch ?
Hi.
I tried to do that you wrote. Didn't seem to work with:
GT-I9100_JB_ClockworkMod-Recovery_6.0.2.9.tar
I downloaded Odin and flashed it instead. Now I got this yellow triangle with an exclamation mark in and phone didn't boot into Android.
Got very worried but I went into recovery mode and voila ClockworkMod was running
After that I followed your instruction. Up to "Format to F2FS". I got errors so I changed back to EXT4 and continued.
Installed CM13 with no problem and got very glad so I forgot step 6-8. Will do them in a few days.
Thank you very much for this guide and zip-archive.
It's actually my daughter who will get the updated phone. She is also very happy
BR
Tobbe
PS. One more thing, is it possible to get rid of the yellow triangle with an exclamation mark in? (only appears at atart up screen) DS.
Glad you did it.
It is strange how bugs can be different for everyone !
Triangle can be removed but it seems rather dangerous for a small benefit : https://forum.xda-developers.com/galaxy-s2/orig-development/2014-01-15-triangleaway-v3-26-t1494114
I have no courage to do it after all these tricky steps we wen't by !
See you,
Thanks djibe. I wanted to flash to CM13 from stock rom, so your guide was really helpful.
I did run into two issues, and want to share how I got around them:
1. I got the "Status 7" problem when trying to flash Philz_touch_6.48*.zip. So instead I flashed the relevant ZIP file from "forum.xda-developers.com/galaxy-s2/development-derivatives/philz-cwm6-stock-kernel-cwm6-root-exfat-t1877270" from stock recovery first. This installed a custom recovery. Then I flashed Philz_touch_6.48 from the custom recovery.
2. After formatting /cache and /data to F2FS, installing CM13 failed. So instead I kept /cache and /data as EXT4 and completed the installation according to the rest of the guide. After rebooting and completing the CM13 Android setup, I redid the installation from step 4 of your guide onwards and F2FS worked this time. I should mention though that before formatting /cache and /data to F2FS, I also repartitioned with a newer repit file from lanchon's github (and increased data to 4G), so I don't know if this had an effect as well.
Hopefully this helps others facing the same problems. I should warn though that this is my first time attempting absolutely anything like this, so please take all this with caution. Your mileage may vary!
S2andCounting said:
Thanks djibe. I wanted to flash to CM13 from stock rom, so your guide was really helpful.
I did run into two issues, and want to share how I got around them:
1. I got the "Status 7" problem when trying to flash Philz_touch_6.48*.zip. So instead I flashed the relevant ZIP file from "forum.xda-developers.com/galaxy-s2/development-derivatives/philz-cwm6-stock-kernel-cwm6-root-exfat-t1877270" from stock recovery first. This installed a custom recovery. Then I flashed Philz_touch_6.48 from the custom recovery.
2. After formatting /cache and /data to F2FS, installing CM13 failed. So instead I kept /cache and /data as EXT4 and completed the installation according to the rest of the guide. After rebooting and completing the CM13 Android setup, I redid the installation from step 4 of your guide onwards and F2FS worked this time. I should mention though that before formatting /cache and /data to F2FS, I also repartitioned with a newer repit file from lanchon's github (and increased data to 4G), so I don't know if this had an effect as well.
Hopefully this helps others facing the same problems. I should warn though that this is my first time attempting absolutely anything like this, so please take all this with caution. Your mileage may vary!
Click to expand...
Click to collapse
Thank you very much for these tips that will surely help others.
Can you send me the direct link to the Philz recovery that was successful for you ?
I'm upgrading my tutorial with your stuff, and making it simpler with a new custom repit file.
Keep in touch
Greetings!
I'd like to present a TWRP recovery for the single-sim Xperia X. This release works on Xperia X F5121 and F5122
DISCLAIMER:
I'm not responsible for any damage done to your device. You have been warned.
REQUIREMENTS
Unlocked bootloader
Working ADB and Fastboot (You can get the latest version through Android Studio or by visiting this site)
FEATURES
MTP support
ADB Sideload
Backups and restores almost every partition
Full SELinux support
Working encryption. You can access /data within recovery
NEEDS TESTING
USB-OTG
DOWNLOADS
INSTALLATION
Unlock the bootloader
Download the file
Put the following code in CMD/Terminal:
Code:
fastboot flash recovery twrp-3.1.1-suzu-*.img
//Replace * with the version you want to flash
Unplug the cable
Press Volume Down + Power to activate the recovery. When installed properly, the device should vibrate funnily, purple LED should appear and after a couple of seconds you should see the TWRP screen.
Enjoy!
BUILD
You need to sync the OmniROM and vendor blobs from DonkeyCoyote. You can find my sources on GitHub.
android_device_sony_loire_common
https://github.com/omnirom/android_bootable_recovery/commits/android-7.1
Thanks:
@grayleshy - for initial TWRP
@AndroPlus for some of his flags
OmniROM team for sources
If you find my work useful, consider buying me a cup of coffee
[TWRP] TWRP 3.1.0 for Xperia X
Old OP below:
Team Win Recovery Project 3.1.0
REQUIREMENT:
- Unlocked bootloader
FEATURES:
- MTP support
- USB OTG storage support
- Covers most partitions for nandroid backups
- ADB root
- Full SELinux support
- Support for partition decryption
Download: Dropbox
Installation via the bootloader (Platform-tools (adb & fastboot))
Code:
fastboot flash recovery recovery.img
Running TWRP: turn the phone off, wait 5 seconds, then pinch at the same time the power key and the volume down key until the device vibrates, release the keys. Recovery starts within 5-10 seconds.
DISCLAIMER:
No one is responsible for any damage done to your device but YOU. You've been warned.
Special thanks kistigun for testing recovery on the device.
Changelog: twrp.me
TWRP was going on OmniRom 7.1 sources and XperiaDeveloper.
SOURCEs: Suzu; loire; Common.
Nice work! Finally no more decryption problems on the X!
Working well, thanks!
One question ; is it possible to reboot the recovery via twrp reboot menu (or use an app like flashfire /flashify)? When I've tried the phone boots normally instead.
baddesthad said:
One question ; is it possible to reboot the recovery via twrp reboot menu (or use an app like flashfire /flashify)?
Click to expand...
Click to collapse
Unfortunately the reboot Recovery does not work from the specifics of the section, but in the future maybe will be fixed. If I don't find how to fix that button will be removed.
samavar89 said:
Unfortunately the reboot Recovery does not work from the specifics of the section, but in the future maybe will be fixed.
Click to expand...
Click to collapse
Good to know, thanks for clarifying
Is there a difference to the 3.1.0 TWRP recovery from the Poison thread?
Oel said:
Is there a difference to the 3.1.0 TWRP recovery from the Poison thread?
Click to expand...
Click to collapse
Yes, this TWRP version has decryption problem fixed. So you can acces internal memory(and make a full backup) without the need of doing a full whipe & format /DATA
kistigun said:
Yes, this TWRP version has decryption problem fixed. So you can acces internal memory(and make a full backup) without the need of doing a full whipe & format /DATA
Click to expand...
Click to collapse
Ah...
Ok, Thanks!
kistigun said:
Yes, this TWRP version has decryption problem fixed. So you can acces internal memory(and make a full backup) without the need of doing a full whipe & format /DATA
Click to expand...
Click to collapse
No,
don't ask password but I can't access my internal memory.
I install zip file from my external sd card only.....no full backup...
someone knows a recovery that finally works?
robby.pgn said:
No, don't ask password but I can't access my internal memory.
I install zip file from my external sd card only.....no full backup...
Click to expand...
Click to collapse
This problem is strange, please provide a log recovery.
I flashed this on my xperia x dual on nougat 7.0
I can go to recovery but when i try to turn on the phone normally it says "The phone is corrupt and cant be trusted bluh bluh..."
it says press power button to continue but when i press it screen turns off and nothings happens
what should i do?!
Kianush said:
I flashed this on my xperia x dual on nougat 7.0
I can go to recovery but when i try to turn on the phone normally it says "The phone is corrupt and cant be trusted bluh bluh..."
it says press power button to continue but when i press it screen turns off and nothings happens
what should i do?!
Click to expand...
Click to collapse
In Your kernel there is support for DM-Verity and Sony RIC?
it's stock kernel man, I unlocked bootloader and flashed stock nougat for xperia X dual sim
I just wanna root it, if there is any other way pls help me out
-----
btw after this problem i used flashtool to flash system and kernel from stock rom to be able to use my phone again
robby.pgn said:
No,
don't ask password but I can't access my internal memory.
I install zip file from my external sd card only.....no full backup...
someone knows a recovery that finally works?
Click to expand...
Click to collapse
Kianush said:
it's stock kernel man, I unlocked bootloader and flashed stock nougat for xperia X dual sim
I just wanna root it, if there is any other way pls help me out
-----
btw after this problem i used flashtool to flash system and kernel from stock rom to be able to use my phone again
Click to expand...
Click to collapse
use this tool/guide to make a rooted kernel(and edit DM-Verity and Sony RIC): https://forum.xda-developers.com/xp...oot-automatic-repack-stock-kernel-dm-t3301605
grayleshy said:
Team Win Recovery Project 3.1.0
Click to expand...
Click to collapse
I've installed and tried this TWRP in my Xperia X with MM. Very nice that it can access the data partition! I did not try to install any zip yet.
Some problems I've seen:
dmesg.log: no output
recovery.log: https://pastebin.com/EwbtuC9q
What is interesting in the output:
Code:
I:cmd: /sbin/exfat-fuse -o big_writes,max_read=131072,max_write=131072 /dev/block/mmcblk1p1 /external_sd
CANNOT LINK EXECUTABLE "sh": cannot locate symbol "__fwrite_chk" referenced by "/sbin/busybox"...
I:exfat-fuse failed to mount with result '', trying vfat
I:Unable to mount '/external_sd'
I:Actual block device: '/dev/block/mmcblk1p1', current file system: 'vfat'
Looks like something is not right with the busybox in the image. Maybe it is that what is causing the external sdcard (in my case in exfat filesystem) not being mounted?
Thanks
robby.pgn said:
don't ask password but I can't access my internal memory.
I install zip file from my external sd card only.....no full backup.
Click to expand...
Click to collapse
This problem is almost resolved, just need to test, but I don't have time to compile recovery. In the test version recovery without decryption, problem solved.
juliompinheiro said:
I've installed and tried this TWRP in my Xperia X with MM. Very nice that it can access the data partition! I did not try to install any zip yet.
Some problems I've seen:
dmesg.log: no output
recovery.log: https://pastebin.com/EwbtuC9q
What is interesting in the output:
Code:
I:cmd: /sbin/exfat-fuse -o big_writes,max_read=131072,max_write=131072 /dev/block/mmcblk1p1 /external_sd
CANNOT LINK EXECUTABLE "sh": cannot locate symbol "__fwrite_chk" referenced by "/sbin/busybox"...
I:exfat-fuse failed to mount with result '', trying vfat
I:Unable to mount '/external_sd'
I:Actual block device: '/dev/block/mmcblk1p1', current file system: 'vfat'
Looks like something is not right with the busybox in the image. Maybe it is that what is causing the external sdcard (in my case in exfat filesystem) not being mounted?
Click to expand...
Click to collapse
This issue failed to reproduce, and yet there is no solution. You the problem is not in Busybox, and something else.
grayleshy said:
Running TWRP: turn the phone off, wait 5 seconds, then pinch at the same time the power key and the volume down key until the device vibrates, release the keys. Recovery starts within 5-10 seconds.
Click to expand...
Click to collapse
For whatever reason I'm not able to boot into TWRP like I should be. I've used the poison version of TWRP before so I know what to do, and yet the phone will just boot normally despite holding volume down and power when off.
I know that TWRP is installed though as I am able to boot to it if I first boot to the bootloader using a USB cable but that is very cumbersome to do though.
grayleshy said:
This issue failed to reproduce, and yet there is no solution. You the problem is not in Busybox, and something else.
Click to expand...
Click to collapse
Clearly for the image available at your dropbox there are some libraries dependency errors, not only for the 'busybox', but also for other binaries that are in /sbin.
I do not know why this issue is only happening on my device since you said you can't reproduce this error. If there is anything I can do to help solve this strange behavior, count on me. I am an advanced linux user, but not too familiar with android specifics.
On latest 333 ROM for UK so that fingerprint scanner works on my Xperia X F5121.
I also modified by kernel/boot so that TWRP doesn't brick (actually boot loop) the device like it did the first time. After using these awesome instructions flashing TWRP recovery from here didn't kill the device any longer: https://forum.xda-developers.com/crossdevice-dev/sony/root-root-stock-firmware-modern-sony-t3558904
I was able to take an early nandroid backup before a bunch of Titanium restores, etc. Now I get stuck at "Backing up data" step and it literally doesn't move to the next file. Attaching an image of where I get stuck. FYI, I do use password encryption on the backup and I did disable MD5 creation... still just stuck.
Next tests are to:
see if the stall is on the same exact file number
try no encryption
do a check disk (fsck) type of repair just in case I have corruption --- on my brand new device
Any suggestions greatly appreciated!
UPDATED:
I only back up Boot, System & Data (the default)
On second attempt it stopped at file 18869 of 22065 --- so it does jump and not consistently stop at a certain file.
OFFICAL TWRP RELEASED, this thread is no longer active. 3-30-2018
https://twrp.me/motorola/motorolamotox4.html
---
UNOFFICIAL BUILDS -- USE AT YOUR OWN RISK AND KNOW HOW TO GET YOURSELF OUT OF TROUBLE IF IT ARISES. I ASSUME NO RESPONSIBILITY FOR YOUR BROKEN THINGS.
UPDATED 01-11-2018
There are now 7.1 based and 8.0 based builds. Obviously, be careful to select the proper download. While I don't think flashing/booting the wrong one would permanently brick the device, let's not find out
For now I will not be attempting to make data decryption work. It is REQUIRED that you unencrypt your device by formatting userdata, so back up your stuff first.
IMPORTANT NOTES: TWRP for OREO is a bit of a pain as it currently requires manually editing your fstab. I have tried to automate this process, but it breaks stuff. So just be aware before you begin that it is a rather time consuming process.
If you make any change to your boot partition after flashing SuperSU, you will need to reflash it or you will get a bootloop.
8.0 OREO TWRP INSTALLATION:
OREO SEEMS VERY FINICKY AND DOES NOT LIKE CHANGES TO ITS FILESYSTEM -- BE PREPARED TO REFLASH STOCK.
0. FLASH OREO FACTORY IMAGE (may work otherwise, but we should be starting from fresh stock here)
1. Download FASTBOOT BOOTABLE TWRP for 8.0/OREO below
2. Download SuperSU 2.82 SR5 below
3. Move SuperSU to external SD or USB OTG
4. From bootloader, fasboot BOOT TWRP
5. Flash SuperSU (note: do not format /data now... not necessary and will cause errors on boot)
6. Reboot system
7. With any root file editor/text editor (Amaze, Total Commander, etc) open /system/vendor/etc/fstab.qcom as a text file for editing.
8. At the end of the /data partition entry, delete "fileencryption=ice" and replace it with "encryptable=footer".
9. Save fstab.qcom (and make sure it is actually saved properly!)
10. Reboot to bootloader and fasboot BOOT TWRP
11. Go to Wipe, hit the FORMAT DATA button, and type "yes" to format /data. This will erase your data, obviously:silly:
12. Reboot system (should now be unencrypted, verify in Settings>Security or by booting TWRP and checking /data with File Manager.
If you later choose to flash TWRP (not the bootable we used here!), you may need to flash SuperSU again to avoid bootloops.
7.1.1 NOUGAT TWRP INSTALLATION:
1. Download current TWRP for 7.1.1 build below
2. Download SuperSU 2.85 SR5 (https://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
3. Move SuperSU to your external Micro SD card.
4. Fastboot flash the TWRP image.
5. Reboot to TWRP.
6. FORMAT data (not wipe...use the "FORMAT DATA" button and type "yes". OBVIOUSLY THIS WILL ERASE YOUR DATA)
7. Install SuperSU 2.85 SR5
8. Reboot to system (it WILL bootloop a couple times...don't panic!) and confirm that device is unencrypted by checking that SETTINGS>SECURITY>ENCRYPTION now prompts "encrypt" (don't do it).
DOWNLOADS:
TWRP FOR 7.1.1 (Nougat) DOWNLOAD: https://drive.google.com/open?id=1Et-AQgCNx7WDAwzihlI51euUa2ixKHEP
TWRP FOR 8.0 (Oreo) DOWNLOAD: https://drive.google.com/open?id=1WcVS_3rloF7jxPulj_jKxfsp3zy5pB5N
FASTBOOT BOOTABLE TWRP IMAGE (OREO BASED): https://drive.google.com/open?id=12ClviqtEjtflB63UQ1CZQNKEqkprBO0u **For temporary TWRP boot using "fastboot boot". Do not flash or you will be stuck in recovery!**
DEVICE TREE: https://github.com/mightysween/android_device_motorola_payton (NEEDS TO BE UPDATED WITH OREO BRANCH)
changelog:
BETA4
-reverted to 3.2.0 for current build (release candidate rebased to 3.2.1).
-fixed "format data" button
-finalized fstab for OTG/SD/INTERNAL mounting
-target is now UNENCRYPTED devices only (/data decrypt will not be fixed)
BETA3
-Rebased to TWRP 3.2.1
-USB OTG working
-all partitions mounting correctly
-considered working except for decrypt and MTP/ADB
BETA2
-fixed internal storage mount
BETA1
- updated source to TWRP 3.2.0
ALPHA3
- Fixed USB mounting (adb/mtp still nonfunctional) BROKEN IN BETA1
ALPHA2
- SD Card fixed
ALPHA1
- /system is now properly mounted.
- now plays nice with our working root method.
- ramdisk is patched to prevent first boot encryption once /data is decrypted (now requires flashable ZIP)
NOT WORKING:
adb/mtp/sideload
/data decryption (abandoned -- /data access requires unencryption)
CREDITS: @kraatus90 for kernel fix, @Chainfire for SuperSU, @jcadduono for no-verity-opt-encrypt scripts.
---
Thanks so much for all your work!
hi,
you said this is really unstable and could brick the device easily. however, you seem to be testing and experimenting with your device a lot, so i'd like to ask if you have any particual unbrick method that you use when something goes wrong.. like, a via fastboot flashable image or something simmilar...?
thanks for your work!
Thanks for you work. If you have any unbrick methods pls tell.appreciated your work ?
I am not going to provide step by step "unbrick" methods, because until the partitioning is properly set up, TWRP has potential access to things that can not be fixed.
Again, this is still highly experimental.
All that said, my entire process to protect any device remains the same: Have a backup for every partition you will be testing, make as few changes as possible at a time, test boot images before flashing (fastboot boot), and test restore methods frequently (flashing back to stock or backups), and don't do anything unless you are highly certain of the outcome.
By those standards, there is nothing to gain by installing TWRP right now, as its basic function (install/backup/restore) is not set up yet.
Found the BoardConfig flag to enable FBE (TW_INCLUDE_CRYPTO_FBE := true) but do not have the lib it is dependent on (libe4crypt) and I don't see it anywhere yet...
For reference (not sure this is most current, but it demonstrates the process)
https://github.com/nijel8/TWRP/commit/bd7492de28963b7e74e8e5d3f17ec9a5a287d9c3
I have confirmed that FBE support is present in the source, dependent on this missing module... so need to figure out where/how to enable it.
It is possible that this entire process is specific to only certain devices (i.e. Pixel, Nexus). If this is the case, we may be stuck at this point for awhile.
Obvious workaround is to not be encrypted to begin with -- but that isn't a "solution".
mightysween said:
It is possible that this entire process is specific to only certain devices (i.e. Pixel, Nexus). If this is the case, we may be stuck at this point for awhile.
Click to expand...
Click to collapse
This appears to be the case, unfortunately. Seems that the TWRP FBE support was built specifically for the Google implementation of FBE which was merged into kernel sources for Nexus and Pixel. Not even using the qseecomd I assumed it was... will remove on next build.
Info on FBE:
https://source.android.com/security/encryption/file-based
Will be testing options to disable forced encryption, and if necessary dm-verity...
Anyone who wants to dig through kernel for related flags and props, it would be greatly appreciated!
Hey, where did the big "format data" button go in TWRP? Is that optional on compile... can't find a flag for it...
Making good progress this morning.
Seem to have a build with properly decrypted /system, and working SD Card. I also have patched the boot.img to disable forced encryption on the first boot. But now, I can not find a safe way to fully format (not "wipe") the /data partition. As mentioned in the previous post, the "FORMAT DATA" button is missing. The fastboot command "fastboot format userdata" returns an error that it does not support RAW format.
Need to figure out why this is happening... and once I do, I believe I can reformat /data without encryption and then will have an almost fully working TWRP build. Obviously, the ideal solution would be to have TWRP work out of the gate with an encrypted /data, but until then this is going to be our best option.
Will post an updated test build in the OP soon.... needs further testing before I would recommend non-expert users to try it.
Getting very close now!
UPDATE: ADDED NEW BUILD TO OP
---
Also, just occurred to me that the ramdisk will need to be patched every time, so now that I have SD card support will be testing some of the existing flashable ZIPs out there that are designed specificially to prevent first-boot encryption and/or disable dm-verity.
---
mightysween said:
Hey, where did the big "format data" button go in TWRP? Is that optional on compile... can't find a flag for it...
Click to expand...
Click to collapse
This is really the only hold up... I changed the partition from 'Advanced Wipe", but as expected, it was still encrypted on boot as it doesn't actually format the footer where encryption is stored. I can't figure out where that darn "FORMAT DATA" button ran off to, and that is exactly what we need here.
mightysween said:
This is really the only hold up... I changed the partition from 'Advanced Wipe", but as expected, it was still encrypted on boot as it doesn't actually format the footer where encryption is stored. I can't figure out where that darn "FORMAT DATA" button ran off to, and that is exactly what we need here.
Click to expand...
Click to collapse
I don't know how to help except to say that using TWRP 3.1.0-MOD_1 with my XT1254 (DROID Turbo), when you go to wipe it has two buttons --- one on the left for Advanced Wipe and Format Data on the right.
johnjingle said:
I don't know how to help except to say that using TWRP 3.1.0-MOD_1 with my XT1254 (DROID Turbo), when you go to wipe it has two buttons --- one on the left for Advanced Wipe and Format Data on the right.
Click to expand...
Click to collapse
I have 3.1.1-0 (same version I am building here) on several other devices, and the button is there. It has to be triggered by something during compile, but I can't figure it out. Driving me nuts
Looking through TWRP source, and can find actions for every other button (wipe, backup, restore, install, etc) but not for format. Hmm.
I posted over on an old but semi-active TWRP flags thread, maybe someone will have some insight.
Wondering if I make a stock boot image without the encryption tag in fstab, and then wipe data and reboot... then flash my image. That may make it so the data partition is never encrypted in the first place and allow TWRP to work.
But that is an ugly, non-user friendly fix. Why can't we just format /data?
---
Final update for today... this seems to be a compile issue, which is a good thing. I tried to manually decrypt /data from the TWRP command line, and got this:
No crypto support was compiled into this build.
Click to expand...
Click to collapse
So, I must be missing something in boardconfig still... and maybe need to set up a small proprietary vendor folder with the necessary libs
mightysween said:
Final update for today... this seems to be a compile issue, which is a good thing. I tried to manually decrypt /data from the TWRP command line, and got this:
So, I must be missing something in boardconfig still... and maybe need to set up a small proprietary vendor folder with the necessary libs
Click to expand...
Click to collapse
Thanks for doing all of this! I wish I had the time and knowledge to help.
Had a few PM's checking on TWRP status, so an update.
The good news is that the X4 is using Qualcomm based decryption for /data... the bad news is that most if it seems to be closed source. This will take some time for me to figure out, but I have already made some progress by sifting through logs.
Right now, I am trying to find a device with similar decrypt scheme to have some more guidance on the process.
mightysween said:
Had a few PM's checking on TWRP status, so an update.
The good news is that the X4 is using Qualcomm based decryption for /data... the bad news is that most if it seems to be closed source. This will take some time for me to figure out, but I have already made some progress by sifting through logs.
Right now, I am trying to find a device with similar decrypt scheme to have some more guidance on the process.
Click to expand...
Click to collapse
dont know all about these things but maybe xiaomi mi a1 twrp can help as it is also using same a/b partition. and twrp is already there for it
vivek638 said:
dont know all about these things but maybe xiaomi mi a1 twrp can help as it is also using same a/b partition. and twrp is already there for it
Click to expand...
Click to collapse
Thanks, the Mi A1 is one of the devices I have been comparing to, and has been quite helpful.
mightysween said:
Thanks, the Mi A1 is one of the devices I have been comparing to, and has been quite helpful.
Click to expand...
Click to collapse
Keep searching. wish i could have helped but dont know anything about compiling n all..
I'm not much of a programmer, but I can look through the files. Is there anything in particular we're searching for?
Nexus 4 Repartition
No one is responsible for your actions except yourself. Everything written further may potentially brick your device, although risk is reduced to minimum.
This repartition package offers 1.5G /system; a /vendor partition and it is fully backward compatible with any ROM (including stock system.img).
Known-issues
HTML:
- If repartition pack says that device isn't correct,
than, if partition table wasn't modified before,
congrats! your device has different memory chip
that those I worked with. No worry, PM me and
I'll add support for it.
DO THE BACKUPs. Repartition will erase all your data
USB connection to PC is MANDATORY else you will not have opportunity to push ROM to your device
Installation
HTML:
# Before processing further we highly recommend you to use our TWRP which has support of EFS/Persist backup
# Or you might lose your IMEI/WIFI + BT mac addresses
# This mod is backwards compatible with any ROM so we highly recommend NOT to reverse it if repartition went well.
# You should use ONLY recovery from this thread since other don't support all benefits of this mod.
# When installing ROM just after you flashed zip and before installing GAPPs you MUST make a resize in TWRP since all roms are build for ~800M system.
# To restore stock layout use same zip and steps as for repartition.
1. Boot into recovery (You need to allow system partition modification to be able resize /system in recovery).
2. Backup your data & Move your files from flash to your PC.
3. Flash repartition pack zip.
4. Do the actions asked by repartition pack (go to Terminal in ordinary recovery and input word that pack will tell you. Everything else will be done automatically).
5. Phone will reboot into recovery.
6. Install TWRP from below (it is build with support of new partitions layout and sizes. It can be differed from official TWRP by next format 3.x.x-1 UA).
7. Format everything. (mount errors will not affect formatting!)
- In TWRP: Wipe > Format data
- Type yes
- Once this completes go to: Wipe > Advanced Wipe
- Tick all the boxes and wipe. There should be no further mount errors.
8. Install ROM which you like.
9. Enjoy better flash partition layout.
If something gone wrong - we recommend you using this guide to restore your phone back
Downloads:
Repartitioning package: GitHub
Credits:
Special thanks to
- Unlegacy-Android team;
- Sudokamikaze;
- ddaggebi for 8GB model layout;
- surfrock66 for his gide for Nexus 5;
As usual, feedback is appreciated
XDA:DevDB Information
Nexus 4 Repartition, Tool/Utility for the Google Nexus 4
Contributors
Clamor, sudokamikaze
Source Code: https://github.com/clamor95/android_device_unlegacy_recovery
Version Information
Status: Stable
Created 2018-09-19
Last Updated 2019-01-18
Common issues and F. A. Q.
Repartition pack should be safe for most devices. Common mistakes, issues and their solution will be published here.
1. You shouldn't flash any internal parts of repartition pack (*.sh files) only flash whole zip using TWRP. You may use my scripts for personal use or projects but authorship should to be kept.
2. If something isn't mounting after repartition try to format partitions that don't mount using Wipe -> Advanced Wipe in TWPR. Ideally you should format in that way all partitions in Advanced Wipe menu (see 5-th step of installation guide).
3. To be sure that repartition went well I enclose loging zip. Flash it after repartition (when device reboots into TWRP). It won't modify anything only generates a partition.log in root of internal storage and outputs your current partition layout to screen. You shoud check if your layout is same as those fragments I provide under spoiler (file systems doesn't matter). If there are any differences you have to discribe what you did and enclose partition.log to your post.
MAKO STOCK
Code:
21 159383552B 1040187391B 880803840B system
22 1040187392B 1627389951B 587202560B cache
MAKO MODIFIED
Code:
21 159383552B 1732247551B 1572864000B system
22 1732247552B 1994391551B 262144000B vendor
23 1994391552B 2099249151B 104857600B cache
4. If you have touchscreen problems use common instructions till you reach entering word. Than plug your phone to PC while you remain in recovery. Enter adb shell from cmd (if you don't know how - google) and enter word that repartition pack asked. Than your phone will reboot automatically into your old TWRP but with new partition layout.
5. Flashable resize zip for ROMs that support addon.d (automatic resize when dirty flashing updates).
actually the lower left corner of my phone screen doesnt work so can you please elaborate what kind of commands are we used to use and terminal and is there any other way to access terminal
mine q,a,z,1 these key are inaccessible in twrp as screen rotation is not supported
bgoel4132 said:
actually the lower left corner of my phone screen doesnt work so can you please elaborate what kind of commands are we used to use and terminal and is there any other way to access terminal
mine q,a,z,1 these key are inaccessible in twrp as screen rotation is not supported
Click to expand...
Click to collapse
Plug your phone to PC while you remain in recovery. Enter adb shell from cmd (if you don't know how - google) and enter word that repartition pack asked. Than your phone will reboot automatically into your old TWRP but with new partition layout.
What can I do to add support for 8GB models? Can I send you some partition tables that you can tinker with? Or sth else? Anyway, huge thanks for your dedication for this device!
ddaggebi said:
What can I do to add support for 8GB models? Can I send you some partition tables that you can tinker with? Or sth else? Anyway, huge thanks for your dedication for this device!
Click to expand...
Click to collapse
PM me, I need a partition table and I'd ask you to test if you have 8GB model.
Something went wrong and now I have only 552mb space. When I try to flash again it says it's not a Nexus 4.
Can anyone help please?
cyberon said:
Something went wrong and now I have only 552mb space. When I try to flash again it says it's not a Nexus 4.
Can anyone help please?
Click to expand...
Click to collapse
Sure. In PM.
OK so my nexus 4 can't transfer files to or from PC at all so if I do this and have the ROM downloaded it will wipe the ROM and the ROM would be gone and my phone would be a nice brick because I can't transfer any files to my PC like it charges with the PC but data transfer doesn't work so again would I be screwed?
@Nathan4923 correct. Usb connection and PC are mandatory
For those who downloaded repartition pack before this message is published, please redownload pack since previous version might have a problems with repartition. If repartition was already made, don't worry everything should be fine. Just use up-to-date pack.
can i return back to old partition if i want to? i hope someone would post a video tut for this one
@jluspo you can with same zip and same steps as for repartition. You didn't read first post carefully.
Clamor said:
@jluspo you can with save zip and same steps as for repartition. You didn't read first post carefully.
Click to expand...
Click to collapse
im using xda appits different layout on browser
I'm I doing it right? I still can't flash gapps
failed to mount Vendor, any suggestions ?
@jluspo resize /system with TWRP after ROM install before GAPPs because ROMs are designed to use ~800MB system.
@cqloveqc you had to format all partitions available in advanced wipe after repartition.
Clamor said:
@jluspo resize /system with TWRP after ROM install before GAPPs because ROMs are desined to use ~800MB system.
@cqloveqc you had to format all partitions available in advanced wipe after repartition.
Click to expand...
Click to collapse
Thanks for the help !
I've found that even with that error, i still succed the process
Hello ho can I do ,,resize /system with TWRP after ROM,,??? I can't find how to do that...
I installed your TWRP > backup > repartition zip > format all partitions > ROM
And now I'm stuck because I can't flash GAPPS...
Mato_xXx said:
Hello ho can I do ,,resize /system with TWRP after ROM,,??? I can't find how to do that...
I installed your TWRP > backup > repartition zip > format all partitions > ROM
And now I'm stuck because I can't flash GAPPS...
Click to expand...
Click to collapse
just read the OP carefully it already mentioned that you had to resize system after installing rom
you can do that by going to advanced wipe in twrp