Hi guys, i'm a bit of a noob and new to these things.
My Canvas HD (A116) is stuck in a Boot Loop and not even going to recovery mode.
History:- I had rooted my Canvas HD,
installed Carliv touch recovery-2 and tried Cynogenmod Port and JellyXperia-V6,
afterwards I restored my phone using ClockWorkMod recovery backup I made earlier.
Then Problem Occurred when I reset my phone using "Factory Data Reset" in settings,
since then the phone is stuck in bootloop- it just shows the CANVAS HD flash then Carliv Recovery Processing loop
and this keeps repeating again & again.
The trouble is that the USB connector of my phone has also become faulty.
Any advise to what can I do?
OR should I take it to micromax service center???
Flash stock firmware
With this tutorial
http://forums.droidbeans.com/microm...)-(stock-recovery)-for-micromax-a116-hd/?wap2
Hope u helped u
Sent from my GT-S5282 using Tapatalk
ArshArora said:
Flash stock firmware
With this tutorial
forums.droidbeans.com/micromax-a116-canvas-hd-rom-index/(stock-rom)-(stock-recovery)-for-micromax-a116-hd/?wap2
Hope u helped u
Sent from my GT-S5282 using Tapatalk
Click to expand...
Click to collapse
Thanks for the reply but the USB port of my canvas A116 is also causing problem and I can't get a stable connection.
Any other advise???
Use traditional method (SP Flash Tool)
Raveesh Delhi said:
Thanks for the reply but the USB port of my canvas A116 is also causing problem and I can't get a stable connection.
Any other advise???
Click to expand...
Click to collapse
Use sp flash tool... Video link for it
http://m.youtube.com/watch?v=7pCiWR_H7wc
Enjoy bro!! Hope it will help you.
Raveesh Delhi said:
Hi guys, i'm a bit of a noob and new to these things.
My Canvas HD (A116) is stuck in a Boot Loop and not even going to recovery mode.
History:- I had rooted my Canvas HD,
installed Carliv touch recovery-2 and tried Cynogenmod Port and JellyXperia-V6,
afterwards I restored my phone using ClockWorkMod recovery backup I made earlier.
Then Problem Occurred when I reset my phone using "Factory Data Reset" in settings,
since then the phone is stuck in bootloop- it just shows the CANVAS HD flash then Carliv Recovery Processing loop
and this keeps repeating again & again.
The trouble is that the USB connector of my phone has also become faulty.
Any advise to what can I do?
OR should I take it to micromax service center???
Click to expand...
Click to collapse
OK so as the recovery is accessible by u
Flash som other ROM 4 nw
Nd thn download a flashable zip of stock Nd thn flash it
Rooted Canvas HD stuck on logo
I rooted my Canvas HD and installed SamFlare V5.1 ROM on this, I tried to increase my phone storage using Re-Partition.apk and after that I reboot into recovery, it shows error and when I tried to restart it, it stuck on CANVA SHD logo.
Please help.
Bheem_Singh said:
I rooted my Canvas HD and installed SamFlare V5.1 ROM on this, I tried to increase my phone storage using Re-Partition.apk and after that I reboot into recovery, it shows error and when I tried to restart it, it stuck on CANVA SHD logo.
Please help.
Click to expand...
Click to collapse
You need to flash the files given in the thread using SP Flash Tools !!
Bheem_Singh said:
I rooted my Canvas HD and installed SamFlare V5.1 ROM on this, I tried to increase my phone storage using Re-Partition.apk and after that I reboot into recovery, it shows error and when I tried to restart it, it stuck on CANVA SHD logo.
Please help.
Click to expand...
Click to collapse
Bheem I hope your problem has been solved.
As for my problem, my device is unsavable.
try wiping dalvik cache
otherwise reflash after clearing all the necessary things
Without working usb connection, you should not try flashing different roms. I lost Samsung galaxy i5000 due to same problem. I didnot have button combination option to go to recovry.
However your device can survive. 1. Turn off the phone by removing battery.
2. Press and hold the Power button along with both the
‘Volume +’ and ‘Volume -’ buttons until the screen
displays two options.(volume keys first then power key . after 5-10 seconds holding, Then 2 option will appear)
3. Press the ‘Volume +’ button to enter Recovery Mode.
wipe dalvik, data, cache partion. install MIUI or pure xperia z2(my choice only, you can try any stable rom) from your memory card.
This should work and get usb repaired aSAP.
Hey guys
I have Micromax A114. It just won't boot up. No logo nothing. When I connect it to my laptop it keeps connecting and disconnecting. Please help me guys. Can't even flash stock ROM as the phone keep disconnecting.
Can't go to fastboot or recovery. Its bricked
You can always go to the Service Center but they will not touch your mobile because your phone is rooted .. If you unroot it also it will have traces so going to service center is a bad idea
hi ,
i have successfully rooted through root genuious
then i tried to install cwm recovery through mobile uncle.
but after i installed cwm recovery now am unable to go into recovery mode
even original recovery mode now not opening .
its showing press +vol for recovery -vol for other
but when i push up vol button into it stuck on canvas logo and later resart ..
now ll you help me further?
device - canvas hd
android - 4.2.1
kernel .-3.4.5 (cst 2013)
Help....
I made flash recovery using Rashr app. And after that when ever i reboot in recovery mode it gives white screen after logo and restarts automatically.
I tried to load recovery mode using power+vol up key then also it shows same thing.. Is there any other way to install custom rom without hoing into recovery mode.
Pls help
I am using a Micromax Canvas HD A116i. I rooted the device properly using KingoRoot.
While trying to flash a new ROM using Mobileuncle tools, the recovery mode won't come up properly.
The device gets stuck on the boot logo screen after trying to reboot normally and also wont go into recovery as the screen pixelates into lines and becomes hazy.
I tried to go into recovery using adb; all in vain.
Please help me.
My first Thread. I bricked my friend's phone. his micromax q380 was pattern locked. and want me to help him unlocking it. he didn't want to lose his data. i googled it and i found a solution, that was to install some zip file via recovery and it was supposed to remove pattern lock information from device.
official twrp recovery for Micromax q380 was not available . i found a beta twrp recovery. i flash it.
and then i flash that pattern unlock.zip. after that i rebooted the device. i continue to loop into recovery( micromax logo -> twrp -> micromax logo loop )
i thought that there is a problem with this recovery.
i was not able to boot into fastboot mod.
i tried android one toolkit. i continuously pressed fastboot button and i was able to log into fastboot mod. it was a relief.
but not for long.
there was an option in this app to flash recovery . i clicked on stock recovery. (this model was not in supported device list og this app, i know it was stupid to click on this button)
i tried to reboot my device(yes it is my responsibility now ) to normal mode. and then i am stuck with this micromax logo loop. i am trying recovery button patterns. and fastboot buttons patterns . but nothing seems to work. i think phone's os is corrupted becasue of that 'pattern unlock.zip file. and recovery is also corrupted.
is there any way to make this device work again ? how can i boot into fastboot mod ?
please help me find solutions for this problem. if you have any ideas please share
.