[KERNEL] [G900H] [TW 5] KIAN KERNEL v1.0 OC 1.5GHz & 2.0GHz & 600MHz [2015/30/10]
Hi,
I began to develop kernel for G900H, Works fine.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
@gelarman see POST
Contributors
@googy_anas , @zparallax , @MEHDIMYADI
[THANKS] to all devs on XDA and the great XDA team
Kernel Features:
Build with Linaro GCC 4.9.4
Based on last kernel source
Based on Linux kernel version 3.10.9
Add LED control
Enable unaligned capability for ARM
ARM: topology: Adjust efficiency ratio for Exynos5422
get_random_int to fix entropy depleting
Block: Reserve only one queue tag for sync IO
Enforce neon-vfpv4
Added Busybox last version
Char_random tweak
Add CPUFREQ_RELATION_C and use it
little tweak to correctly restore min/max policies
Make sync satisfy many requests with one invocation
LZO decompression speedup on ARM by using unaligned access
Enable/Disable logger via sysfs
media & video codec tweaked
Schedule mmc on idle CPU
Fix inaccurate accounting for real-time task
SELinux: Avoid enabling enforcing by conventional flag
SELinux: hard permissive
Add wolfson sound engine
Don't update idle time if cpu offline
Fix race that cause writeback hung
Enable UNALIGNED_ACCESS
Enable ondemand
Optimized ARM RWSEM algorithm
Fix compat msgrcv with negative msgtyp
Network Speed Tweak
Fix potential memory leak
add support for LZ4-compressed kernel
Add Force Fast Charge
Enabled ARMV7 COMPAT
Implement KERNEL MODE NEON
Filter multicast packages while suspended
Add LZ4 support [Yank555.lu-LoungeKatt]
CPU unaligned access path
Add new routine cpufreq verify within cpu limits
Disable generic big.little + minor changes
Interactive: merge interactive governor from new G920F source
Create generic version of ablk_helper
Add ARM NEON implementation
Disable a lot of debugging
Disabling software CRCs (+30% Performance)
SPi CRC configurable
Fix compilation error due to frame size (usb_storage)
Fix DEBUG_SECTION_MISMATCH
Fix hsbadr_MultiSystem_Kernel
Fix memory leak in gpiod_sysfs_set_active_low
Fix dvfs problem
Implement CPU_GPU Clock & Voltage & Thermal controls
Close race between key lookup and freeing
Modem waketime change
Prevent bringing up new CPUs during per-CPU initialization
Optimize copy_page for modern ARM platforms
Optimized ARM RWSEM algorithm
Drecrease time to enter sleep
Remove + sign from kernel version
Optimize apply slack
Add userspace knobs for users to filter some common excesive...
Added several tweaks and several optimizations
....soon more feature and tweak
Changelog:
v1.0
LZ4 compressor and crypto modules updated
Optimized Wifi
Enabled INPUT_EXPANDED_ABS
Ported exynos nterface from Universal5410
Added a missing permission check to do_umount
Increased hash table size for better performance
Again drecrease time to enter sleep
Added new hook for userspace cortex-brain script
Selinux: Do not allow mode changes
SELinux: just shut up
add system wide power_efficient workqueues
and more ....
Enjoy!
older
v0.9
REVERT CPUFREQ_RELATION_C
REVERT merge interactive governor from new G920F source to stock
REVERT media & video codec tweaked
Increased default entropy settings to (512,2048)
Updates for Power Suspend
Optimized SLUB memory allocator
Ramdisk Tweaked
Optimized and Tweaked
v0.8
Rebased with last source (G900HXXU1BOG6)
Add security in-core xattr support
DEFAULT DVFS changed from 266 to 350
Full neon-vfpv4 support
Implement KERNEL MODE NEON
Added charger control
Enable mounting cifs drives visible to all apps
Increase booting freq to 1.5GHz
Now CPU Remember last policy min&max on cluster restart
Check cpuidle_enable_device() return value
Request based dm-crypt
Added powersuspend driver
Added display panel hooks for powersuspend
Now configurable android log buffer sizes
Added some validation of lvds values
Added Dynamic read ahead
Fixed potential memory leak in path_lookupat
Added a switch for fork migration on big domain
Added missing videodev2 exynos headers
Clear page active before releasing pages
Fix potential logical errors
Now you can change TEMP control for reduce performance for period of time @Stweak in MISC tab/TEMPERATURE CONTROL
REVERT GPU some tweak to stock
and more...
v0.7.2
Mistake frq in gpu fixed (677 MHz)
sorry
v0.7.1
Revert again CPU min frq to 200mhz and work with interactive GOV, if you do not like, change it @Stweak and dont have music stutter problems in deep sleep
Overclock GPU to 600MHZ
Tweaked again
Note: The first boot after flash this kernel speed may be lower, The problem only for the first time and then enjoy a lower battery consumption.
v0.7
LMK Tune up
Improve 3x faster integer sqrt
Now arch_power & gentle fair sleepers switchable @Stweak
Ported HOTPLUG_THREAD_STOP from N920F
Fixed a potential memory leak
Fixed an issue that FACS initialization is performed twice
Fixed footbridge clockevent device
Set LCD {0,1} enable lines when turning on CLCD
Fixed frequency typos
Fixed sparsemem build
Fixed bio_integrity_verify segment start bug
Fixed gendisk reference leak
Use kmem_cache_free when freeing entry in inode cache
Allow clocksources to be selected earlier
Enabled CLEANCACHE & ZCACHE
Fixed the setting of PF_DUMPCORE
Raise CPU OC to 1.5GHz and for A57 to 2.0GHz (Greater frequency of this does not work)
Revert GPU OC
Fixed a bug in tree bucket decode
Sensorhub: reduce wakelock time
Fixed lookup_dcookie() parameter handling
Fixed parameter handling for compat readv_writev syscalls
Fixed the too small buffer for dname
Fixed 2 bugs in msgrcv() MSG_COPY implementation
Modify message queue accounting to not take kernel data
Wake up worker only when the worker is idle
Use slowpath for cross page cached accesses
Added missing curly braces
Don't wait for congestion when mem is high
Fixed swapoff hang after page migration and fork
Pass readahead info down to the i_o scheduler
Fixed lockdep splat
Fixed irq_work 'tail' recursion
Fixed memory corruption when retrying atomic copy
Fixed stack info leak in timer_create()
Revert "gpu: more changes to reduce lags"
Implement smarter wake-affine logic
Optimize find_busiest_queue()
Fixed inode security list corruption
Fixed incorrect AI range code handling
Fixed posix_acl_file_xattr_userns gid conversion
Fixed bad hashing of dentries
Allow rescuer thread to do more work
Fixed occasional slow sync
Fixed writeback cache thrashing
Fixed BUG when booting
Optimize Sfck Compression
v06.1
Optimize for non-rotational
Fix a race in elevator switching and md device initialization
Fix "unautorised actions are detected reboot your device for desintall them" error [ @ yanis488 ]
v0.6
Allow down to 200MHz
Decrease wakelock time to 250ms
Fix calculation of dirtyable memory
Fix race between dentry put and lookup
Remove cross-cpu IPI by new latency request
plug the memory leak
Reduce l2_hsic wakelocks by decreasing l2_delay to 200ms
Use correct size for sysctl timeout entries
O3, let's go full placebo
SELinux: Fix memory leak upon loading policy
WolfsonMicro WM5110 sound control now working @googystweak
Tweak gpu clock
Selinux=permissive @boot
MIN DIRTY THRESH PAGES increased
NTFS support
Unlock freq chipset to 1600MHz and 2400MHz ***Beware dangerous***
NOTE: First time then boot up phone with new kernel( v0.6) please install any cpu manager like 3C Toolbox and go to cpu manager change 1.6GHz to 1.3GHz
GPU OC steps to 677 MHz ***Beware dangerous***
NOTE: First time then boot up phone with new kernel( v0.6) please install any gpu manager like 3C Toolbox and go to cpu manager and press GPU tab change 677MHz to 480MHz
and Other changes ...
v0.5
Revert Some tweak for stability
Speedup WB_SYNC_ALL pass called from sync
Sync: don't block the flusher thread waiting on IO
fs_aio.c: Asynchronous I_O latency to a solid-state disk greatly incrased
Input-touchscreen Added input-booster event (from S6)
sched: Reduce overestimating rq->avg_idle
sched_deadline: Fix a precision problem in the microseconds range
v0.4.2
now stweak working but not fully, use it at cpu and gpu is RISK! to be careful
Busybox Fully Fixed
LED NOTIFI. Brighter
several tweaks and several optimizations for better performance with battery life
v0.4.1
Fixed Stweaks error (again say not fully work because not enough time)
Fixed Busybox
several tweaks and several optimizations for better performance with battery life
etc.
v0.4
Lag bug fixed
Ramdisk updated to G900HXXU1BOG6
Revert several mod for better performance
several tweaks and several optimizations
v0.3
Enabled ARMV7 COMPAT
Implement KERNEL MODE NEON
Filter multicast packages while suspended
Add LZ4 support [Yank555.lu-LoungeKatt]
CPU unaligned access path
Add new routine cpufreq verify within cpu limits
Disable generic big.little + minor changes
Interactive: merge interactive governor from new G920F source
Create generic version of ablk_helper
Add ARM NEON implementation
Disable a lot of debugging
Disabling software CRCs (+30% Performance)
SPi CRC configurable
Fix compilation error due to frame size (usb_storage)
Fix DEBUG_SECTION_MISMATCH
Fix hsbadr_MultiSystem_Kernel
Fix memory leak in gpiod_sysfs_set_active_low
Fix dvfs problem
Implement CPU_GPU Clock & Voltage & Thermal controls
Close race between key lookup and freeing
Modem waketime change
Prevent bringing up new CPUs during per-CPU initialization
Optimize copy_page for modern ARM platforms
Optimized ARM RWSEM algorithm
Drecrease time to enter sleep
Remove + sign from kernel version
Optimize apply slack
N O T E
googy Stweak not fully work! ( i'm working... or can you help me, please help me )
Fix
A. for wifi password issue
PHP:
1- open build.prop
2- search ro.securestorage.support
3- change true to false
Version Information
Status: Stable
Current Version: 1.0
Release Date: 2015-30-10
Last Updated 2015-30-10
Created 2015-06-07
Source
Web Site
Kernel Source : soon.
How to Flash:
Please download Flashify from google play
1. Restart to recovery
2. Flash attached .zip file. (xxx - CWM.zip)
5. Clearing the dalvik cache
6. Restart to system
Enjoy!
Hello
Tnx a lot
Any more Governor ?
Undervolt Feature?
SElinux full Permissive???? Thank
not working XtreStoLite 2.1 !!!
wizard6601 said:
Hello
Tnx a lot
Any more Governor ?
Undervolt Feature?
Click to expand...
Click to collapse
coming soon..
SONJACKY said:
SElinux full Permissive???? Thank
Click to expand...
Click to collapse
SONJACKY said:
View attachment 3393307not working XtreStoLite 2.1 !!!
Click to expand...
Click to collapse
that info in about is fake, u can test selinux with all apps need selinux permissive for test u can test selinux with SCR Screen Recorder, work fine:fingers-crossed:
Working well with Xtrestolite 2.1.
Update :Massive battery drain.
Sent from my SM-G900H using XDA Free mobile app
Oh my god finallyyyyyyyy thank you alot sir
---------- Post added at 01:21 AM ---------- Previous post was at 01:12 AM ----------
please add teh deaming option for teh led blinking that would be great
oc features as well
and undervolting options
i try install Walkma but not working Soundechement !!!
the problem is with the SELINUX is still set to enforcing, tried to install viper4android but no luck too
there are some tweaks on the selinux that have to be set, but everything else seems working good job and i'll be waiting for the next release
Working great!
You are a saviour to us G900H users who have gone without a customer kernel so long!
Excellent job, working fine with Xtrestolite 2.1 .. waiting for more features...
oswade said:
Working great!
You are a saviour to us G900H users who have gone without a customer kernel so long!
Click to expand...
Click to collapse
DarkWajdi69 said:
the problem is with the SELINUX is still set to enforcing, tried to install viper4android but no luck too
there are some tweaks on the selinux that have to be set, but everything else seems working good job and i'll be waiting for the next release
Click to expand...
Click to collapse
SONJACKY said:
i try install Walkma but not working Soundechement !!!
Click to expand...
Click to collapse
DarkWajdi69 said:
Oh my god finallyyyyyyyy thank you alot sir
---------- Post added at 01:21 AM ---------- Previous post was at 01:12 AM ----------
please add teh deaming option for teh led blinking that would be great
oc features as well
and undervolting options
Click to expand...
Click to collapse
jats007 said:
Excellent job, working fine with Xtrestolite 2.1 .. waiting for more features...
Click to expand...
Click to collapse
new ver. released, please see in OP.
MOKIAAA said:
new ver. released, please see in OP.
Click to expand...
Click to collapse
Great!!!!!!!! Will try it soon..
Kernel is working really well the battery drain seems to be less than the first release
led blinking (fading option) is not working but everything works fine good job man thank you so much
kernel working for walkman of me. Thank very much
Work with SpaceRocket rom v4
Kernel new version 0.2.1
works well on g900h SpaceRocket rom v4
thanks
make a cool name for it
Work very good friend, you give me permission to include a Rom I'm cooking?
Desde mi G900H by Rom Genezis
george0884 said:
Work very good friend, you give me permission to include a Rom I'm cooking?
Desde mi G900H by Rom Genezis
Click to expand...
Click to collapse
yes, you can buddy,
Agree that this kernel needs a cool name .
Hope someone can get stweaks working!
Related
Visit our Hompage
www.team-blockbuster.com
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It's a Kernel for AOSP/AOKP/CM9 Roms. Only stable mods with best Battery life.
All my Sourcecode's you can find here. https://github.com/pinpong
based on samung update 7 patched to linux 3.0.42
I/O Schedulers: bfq, noop, sio,cfq (default), deadline, vr
Governors: ondemand (default) , lulzactive, conservative interactive, sakuractive,
intelldemand, lagfree, smartassv2, savagedzen, performance, userspace, powersave, brazilianwax, lazy
Bootanimation Support
J4FS: Custom Bootlogo (( you can use helcat's bootscreen changer from market SGS2 BootScreen Changer )
be sure you have reset your flash counter) How to [02.03.2012][ROOT] TriangleAway v1.25
XZ Compression
Improved Touchscreen sensitivity
Tegrak Second Core App Support
Brilliant Color
Thoravukk control [APP]Thoravukk Control for Thoravukk Kernel
LED Timout ON/OFF
BLN fadeout / breathing effect
Voodoo Louder Support ( need the VoodooLouder app )
CPU Overclocking & Undervolting support
GPU Overclocking & Undervolting support
Charging voltage support ( use at your own risk )
CIFS
TUN
OTG ( USB mouse and keyboard support )
fuse.ko ntfs support
Compile with special CFLAGS
stripped modules
init.d support
Ultimate Kernel Cleaning Script included samsung ultimate kernel cleaning script
HTML:
***4.1***
linux 3.0.37-42
update to latest samung sources
MDNIE fixes
revert a lot of patches
add lazy governor
bfq, sio, vr tweaked
latest clockworkmod recovery without touch
and a lot of other new and cool stuff
import a lot of fluxi's patches thx to him
***3.40***
wakelock: main_wake_lock fix by tungstwenty
wakelock: (tungstwenty's implementation)
Auto-brightness increased slightly from s3 ( thx hardcore )
MDNIE screen sharpness and color tuning (improves text readability) from s3 ( thx hardcore )
init.d script fix ( was my fault, i forgot to change it after update th initramfs :D )
MDNIE color tuning: reduce color saturation for Standard mode from s3 ( thx hardcore )
Remount all partitions with noatime
Remount ext4 partitions with optimizations
linux 3.0.37
update ramdisk
update ramdisk-recovery
***3.37***
sync: Add synchronization framework
sw_sync: add cpu based sync driver
sync: add timestamps to sync_pts
sync: add debugfs support
sw_sync: add debug support
sync: add ioctl to get fence data
sw_sync: add fill_driver_data support
sync: add poll support
enable sync And sw_sync
enable conservative governor
update ramdisk
update ramdisk-recoevry
***3.33***
fix recharge issue if the phone is off
some code cleanup
update ramdisk-recovery
update conservative( thx fluxi ), interactive, smartass2 governor
some GPU default changes ( let's try again )
xz compressed
[U]i'll push new patches to github if i'm back from holiday
[/U]
***3.31***
wifi deepsleep fix
block: strict rq_affinity
block: BFQ v3-r4 IO Scheduler
***3.24***
update ramdisk
enable IP tunneling
mach-u1: THRESHOLD_BATT changes
bcmdhd: Change packet filter settings to block multicast
init:calibrate: lpj from 3.4
Makefile: add one more cflag
add optimized ARM RWSEM algorithm
power: raised polling interval andand use default charge current
ARM: hard float
***3.22***
insecure adbd
back to touch recovery
fixed backup function
update ramdisk
update ramdisk-recovery
GPU: 100MHz, 160MHz, 267MHz as default
GPU: Threshold 84% 44% 84% 64% as default
# The new GPU defaults should fix some game problems like in Samurai vs Zombies defense
Timer frequency: 300Hz
mach-u1: THRESHOLD_BATT changes
.config: enable IP tunneling
***3.20***
update ramdisk
update ramdisk-recovery
usb: gadget: storage: make FSG_NUM_BUFFERS variable size
usb: gadget: android: Honor CONFIG_USB_GADGET_VBUS_DRAW
Use 4 storage pipeline buffers
Increase vbus draw
update Ultimate kernel Cleaning Script
***3.13***
Update busybox
AFTR || LPA as default
enable SCHED_MC
use cm recovery without touch
***3.11***
linux 3.0.36
color adjusment (color looks now more powerful)
use only 1200MHz for recovery mode
cpufreq: interactive governor: Add a time view concept
net: wireless: bcmdhd: Reduce priority for dhd_dpc and watchdog
***3.09***
linux 3.0.35
lib: introduce some memory copy macros and functions
lib: improve the performance of memcpy and memmove of the general version
bcmdhd: enable pno support, change initial scan, fixes wifi direct
net: wireless: bcmdhd: Driver update from N7000 Update 3 sources
mach-u1: Make SoC "need recal" check shut up
max17042: Make driver less chatty
sec_battery: Make driver less chatty
modem_if: Stop printing [MIF] messages
arm: remove stale export of 'sha_transform'
lib/sha1.c: quiet sparse noise about symbol not declared
sched: Don't call task_group() too many times in set_task_rq()
arm: remove "optimized" SHA1 routines
lib/sha1: use the git implementation of SHA-1
config: Set country/region code
keyboard: cypress: Ensure light is off, enable regulator only if needed
mmc: Fix file permissions from N7000 commit
mmc: Pull in N7000 Update3 mmc drivers, disable MMC_CAP_ERASE
update ramdisk-recovery
update ramdisk
***3.07***
use cfq as default
fix recovery error
linux 3.0.34
some more patches from myfluxi and cm kernel
more color adjustment
***3.05***
Linux 3.0.33
fixed wifi toggle issue
same patches from fluxi recovery
and a lot of other patches but sorry i'm very busy at time will add it later
***3.02***
linux 3.0.32
fixed ffc
aosp charger
enable IP tunneling
ubuntu/linaro 4.6.3-11ubuntu5 toolchain
ondemand governor as default
remove mfc firmware
mali: Driver update from N7000 Update 3 sources
more matches to cm kernel
add ACCESSORY_SET_AUDIO_MODE control request and ioctl
usb: gadget: f_accessory: Add support for HID input devices
usb: gadget: f_audio_source: New gadget driver for audio output
sound: mc1n2: Prevent tick-noise when reboot menu selected
usb: gadget: composite: Fix corruption when changing configuration
sched_rt: fix SCHED_RR across cgroups
keyboard: cypress: Automatically enable BLN while charging
touchscreen: mxt224_u1: Update touch values according to power state
touchscreen: mxt224_u1: Use mxt224_ta_probe instead of writing directly
net: wireless: bcmdhd: Fix division by 0 if dhd_watchdog_ms is 0
net: wireless: bcmdhd: Fix WPS PBC overlap failure
config: enable kernel panic timeout
max8997: Implement Accessory Charger Adapter support
mach-u1: Rework ramconsole init
Add correct microphone code for PX devices
cpufreq: Build smartassv2 as a module
and something more changes
***2.57***
tun as module
adjust touchscreen parameters
disable CONFIG_BUG
lower LOG_BUF_SHIFT 18->14
led button fadeout effect
adjust panel gamma
recovery fixes
ramdisk cleanup
***2.55***
linux 3.0.31
add brazilianwax gov
a bit more undervolting
brilliant color
sync with latest UKCS
***2.53***
BLN enabled by default
touchscreen sensitivity changes on battery
fixed adb in recovery mode
initial LED breathing effect ( thx fluxi ) needs a app update
initial LED blink function ( thx fluxi ) needs a app update too
new tweakz
color calibration
***2.52***
touchscreen fix ready
net: wireless: bcmdhd: Driver update from SHW-M250S_ICS_Opensource_Update5 ( thx fluxi )
[URL]https://github.com/pinpong/thoravukk[/URL]
****2.50***
mach-u1: solved problem with touch sensitivity
ramdisk cleanup
***2.48***
linux 3.0.30
remove wheatly governor
remove lazy governor
cpufreq interactive updated
re-working recovery
fixed nandroid backup
fixed led timout always off/on
vibrator level default4
power: raised polling interval and usb charge current
Timer frequency: 300Hz
Makefile: Compile with -Ofast
remove app from boot.img ( now you need to download in app thread [URL="http://forum.xda-developers.com/showthread.php?t=1616426"][APP]Thoravukk Control for Thoravukk Kernel [/URL]
***2.45***
App: some fixes [COLOR="Red"]( before you flash new kernel be sure you have deinstall the old thoravukk control app )[/COLOR]
USB OTG support thx gokhan
remove debugging
re-compiled recovery
***2.43***
Thoravukk-kernel App( beta )
better battery runtime
***2.41***
linux 3.0.29
hope we fix sod's
minore fixes
fuse.ko ntfs support
***2.40***
revert: Switch to Gingerbread legacy hotplug
update interactive Governor
remove lot debugging and tracing
revert: 1200MHz lowered voltage
for completely chngelog check [url]https://github.com/pinpong[/url]
***2.39***
fix permission
Joe's RCU
Switch to Gingerbread legacy hotplug ([COLOR="Red"] testing[/COLOR] )
more on github [URL]https://github.com/pinpong/thoravukk/commits[/URL]
***2.37***
update ramdisk
fix for bootsplash changer
cleanup
update recovery
1200MHz lowered voltage
***2.35***
[COLOR="Red"]now we have a great ics kernel [/COLOR]
should work now with newer and older aosp roms
more optimizations
update recovery
[COLOR="Red"]switched mountpoints for sdcards to match cm standard:
/mnt/emmc = internal storage
/mnt/sdcard = external sdcard[/COLOR]
[url]http://forum.xda-developers.com/showpost.php?p=25027440&postcount=25700[/url]
***2.32***
same as 2.30 but will work with newer cm9 nightlys
***2.30***
back to 2.21 cpu driver and enable 1400&1600MHz ( i think i will remove 1600Mhz next version )
led_timout back to 500
more compiler optimization
***2.28***
change to stable cpu drivers. 200MHz-1400MHz
led_timeout 250 as default
***2.25***
cpu voltage fixes
***2.24***
fix permission ( init.d should work fine now ) it will fix the VC conflict
remove 300,400,600,900MHz frequencies
stripped modules ( thx saturn_de for the good idea ) we get smaller modules
remove ext4 remount script ( it's useless )
***2.23***
CPU: Now with 16 steps ( thx homura/fluxy )
J4FS Module for custom bootlogo thx codeworkx & sakuramilk to gimme some input
more cleanup
add lippol94 kernel cleaning script
remove cleanup.sh
***2.21***
Linux 3.0.28 upgrade
recovery-ramdisk cleanup
ramdisk cleanup
change touchscreen sensitivity
**2.19***
enable CIFS
CGROUP_TIMER_SLACK
Add adjustable vibrator levels
Performance improvement
***2.17***
Patch to linux 3.0.27
disable pegasusq governor
set leds on for 1 secs as standard
change recovery color
set the right path for sd and sd-ext in recovery
disable more kernel debbuging
sio tuned for flash device's
set lulzactive as default
***2.16***
initramfs cleanup
hope we fix kernel_panic
Touch recovery thx sk8erwitskil
Use other way to copy liblights ( now it should work without problems )
Set sakuractive as default governer
***2.03***
init.d support
modded initramfs
add wheatley governer
add cpu overclocking thx gm
CPU Overclocking & Undervolting support thx gm
GPU Overclocking & Undervolting support thx gm
BLN auto install
Tegrak second core app support
Tegrak touch move app support
Charging voltage support thx gm
add clean-up script
*neldar *hardcore *koush *sakuramilk *homuhomu
* tegrak *gokhanmoral *cattleprod *creams *arighi *fluxi *sk8erwitskil
*vitalij *thank's to all members of team-blockbuster and all i forgot
BIG THANKS TO
*stratosk *saturn_de *mialwe *zacharias.maladroit *simone201 *codeworkx
FOR ANSWER ALL MY STUPID QUESTIONS
OUR APP IS NOW AVAILABLE ON MARKET
Don't forget to press the thanks button.
FAQ:
Q. My device rebooted or crashed, how can I help?
A: Get me /proc/last_kmsg and logcat.
Q. Do I need to wipe anything when flashing this kernel?
A: No.
Q: What is the best cpu/gpu oc/uv settings?
A: Use what you think is the best for you.
Q: You have huge battery drain?
A: It will improve after some time.
Q. For wich Roms i can use this Kernel?
A: It will work only on AOSP based Roms.
Q. You have Question about Thoravukk Control?
A: Use this Thread [APP]Official Android application for Thoravukk Kernel or send us a e-mail: [email protected]
Q. My device not entering deep sleep if i use Wifi?
A: That's not a Kernel issue! It's a Router and (Windows 7) Network problem. Disable IPv6, IP Helper service, shell hardware detection service and the Windows Media Player Network Sharing Service.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
........................
Helpfull links
[REF][TWEAKS] Kernel Governors, Modules, I/O Schedulers, CPU Tweaks, AIO App Configs
[REF][ICS] Kernel Stuffs - How is ICS Kernel Different | updated Apr 06 2012
[GUIDE] ADB Workshop and Guide for everyone
Click to expand...
Click to collapse
Click to expand...
Click to collapse
..................
Cool! One thing though.. what is sakuractive? Never heard of it.
Sent from my GT-I9100 using xda premium
Nice mate!
Envoyé depuis mon GT-I9100 avec Tapatalk
Thanks , works perfectly
stormtroopercs said:
Cool! One thing though.. what is sakuractive? Never heard of it.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
'sakuractive' - this driver mimics the frequency scaling behavior in 'ondemand', but with several key differences. First is that frequency transitions use the CPUFreq table directly, instead of incrementing in a percentage of the maximum available frequency. Second 'sakuractive' will offline auxillary CPUs when the system is idle, and online those CPUs once the system becomes busy again. This last feature is needed for architectures which transition to low power states when only the "master" CPU is online, or for thermally constrained devices.
Looking good man!
Great work seems good will give it a try.
Good to see more kernel devolpers for AOSP,cm,etc...
Flashing it now and quite exited to try it
EDIT: Booting oké, BLN works. will report some more info about the kernel after some tests.
Weird thing.. i have button lights off. but when i turn on the screen they are on for about 5 seconds they they switch off.
And tometimes they just turn on.. very strange
Good work, touch recovery? i'm searching for a kernel with it
Qliratu said:
Good to see more kernel devolpers for AOSP,cm,etc...
Flashing it now and quite exited to try it
EDIT: Booting oké, BLN works. will report some more info about the kernel after some tests.
Weird thing.. i have button lights off. but when i turn on the screen they are on for about 5 seconds they they switch off.
And tometimes they just turn on.. very strange
Click to expand...
Click to collapse
I get this same light issue..
but i also get screen of death when the phone enters deep sleep.. happened every time went to deep sleep. tried battery pull and even reinstall kernel.. same issue
on hydrogenics aokp
wich governer and cpu scheduler do u use?
Just changed to performance from sio and on demand and performance caused my phone to keep locking up.
Sent from my GT-I9100 using xda premium
Razer(x) said:
Good work, touch recovery? i'm searching for a kernel with it
Click to expand...
Click to collapse
If you want a touch recovery you can try Siyah v3beta7 he have it from here
http://forum.xda-developers.com/showthread.php?t=1555259
If anyone has the screen of death.. I changed the scaling governor from performance to pretty much anything else and no more screen of death.. fyi..
phone sleeps well...responds well...running codeworkx 0331 build....i changed to smartassv2 and i'm loving it!!
stormtroopercs said:
Just changed to performance from sio and on demand and performance caused my phone to keep locking up.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Do you know that performance governor keeps your phone constantly on the highest frequency ?
Sent from my iPad 2 using Tapatalk HD
NEAK + A few extra Governors?
superleeds27 said:
NEAK + A few extra Governors?
Click to expand...
Click to collapse
****ignore
Visit our Hompage
www.team-blockbuster.com
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It's a Kernel for AOSP/AOKP/CM10 Roms. Only stable mods with best Battery life.
All my Sourcecode's you can find here. https://github.com/pinpong
based on samung update 7 patched to linux 3.0.42
I/O Schedulers: bfq, noop, sio,cfq (default), deadline, vr
Governors: ondemand (default) , lulzactive, conservative interactive, sakuractive,
intelldemand, lagfree, smartassv2, savagedzen, performance, userspace, powersave, brazilianwax, lazy
Bootanimation Support
J4FS: Custom Bootlogo (( you can use helcat's bootscreen changer from market SGS2 BootScreen Changer )
be sure you have reset your flash counter) How to [02.03.2012][ROOT] TriangleAway v1.25
XZ Compression
DISABLED CAP_ERASE (No superbrick bug)
Improved Touchscreen sensitivity
Tegrak Second Core App Support
Brilliant Color
Thoravukk control [APP]Thoravukk Control for Thoravukk Kernel
LED Timout ON/OFF
BLN fadeout / breathing effect
Voodoo Louder Support ( need the VoodooLouder app )
CPU Overclocking & Undervolting support
GPU Overclocking & Undervolting support
Charging voltage support ( use at your own risk )
CIFS
TUN
OTG ( USB mouse and keyboard support )
fuse.ko ntfs support
Compile with special CFLAGS
stripped modules
init.d support
Ultimate Kernel Cleaning Script included samsung ultimate kernel cleaning script
HTML:
***4.3***
init.d script fix
more performance by code opzimizations
add lulzactive governor
***4.2***
It run on Jelly Bean now
***4.1***
linux 3.0.37-42
update to latest samung sources
MDNIE fixes
revert a lot of patches
add lazy governor
bfq, sio, vr tweaked
latest clockworkmod recovery without touch
and a lot of other new and cool stuff
import a lot of fluxi's patches thx to him
***3.40***
wakelock: main_wake_lock fix by tungstwenty
wakelock: (tungstwenty's implementation)
Auto-brightness increased slightly from s3 ( thx hardcore )
MDNIE screen sharpness and color tuning (improves text readability) from s3 ( thx hardcore )
init.d script fix ( was my fault, i forgot to change it after update th initramfs :D )
MDNIE color tuning: reduce color saturation for Standard mode from s3 ( thx hardcore )
Remount all partitions with noatime
Remount ext4 partitions with optimizations
linux 3.0.37
update ramdisk
update ramdisk-recovery
***3.37***
sync: Add synchronization framework
sw_sync: add cpu based sync driver
sync: add timestamps to sync_pts
sync: add debugfs support
sw_sync: add debug support
sync: add ioctl to get fence data
sw_sync: add fill_driver_data support
sync: add poll support
enable sync And sw_sync
enable conservative governor
update ramdisk
update ramdisk-recoevry
***3.33***
fix recharge issue if the phone is off
some code cleanup
update ramdisk-recovery
update conservative( thx fluxi ), interactive, smartass2 governor
some GPU default changes ( let's try again )
xz compressed
[U]i'll push new patches to github if i'm back from holiday
[/U]
***3.31***
wifi deepsleep fix
block: strict rq_affinity
block: BFQ v3-r4 IO Scheduler
***3.24***
update ramdisk
enable IP tunneling
mach-u1: THRESHOLD_BATT changes
bcmdhd: Change packet filter settings to block multicast
init:calibrate: lpj from 3.4
Makefile: add one more cflag
add optimized ARM RWSEM algorithm
power: raised polling interval andand use default charge current
ARM: hard float
***3.22***
insecure adbd
back to touch recovery
fixed backup function
update ramdisk
update ramdisk-recovery
GPU: 100MHz, 160MHz, 267MHz as default
GPU: Threshold 84% 44% 84% 64% as default
# The new GPU defaults should fix some game problems like in Samurai vs Zombies defense
Timer frequency: 300Hz
mach-u1: THRESHOLD_BATT changes
.config: enable IP tunneling
***3.20***
update ramdisk
update ramdisk-recovery
usb: gadget: storage: make FSG_NUM_BUFFERS variable size
usb: gadget: android: Honor CONFIG_USB_GADGET_VBUS_DRAW
Use 4 storage pipeline buffers
Increase vbus draw
update Ultimate kernel Cleaning Script
***3.13***
Update busybox
AFTR || LPA as default
enable SCHED_MC
use cm recovery without touch
***3.11***
linux 3.0.36
color adjusment (color looks now more powerful)
use only 1200MHz for recovery mode
cpufreq: interactive governor: Add a time view concept
net: wireless: bcmdhd: Reduce priority for dhd_dpc and watchdog
***3.09***
linux 3.0.35
lib: introduce some memory copy macros and functions
lib: improve the performance of memcpy and memmove of the general version
bcmdhd: enable pno support, change initial scan, fixes wifi direct
net: wireless: bcmdhd: Driver update from N7000 Update 3 sources
mach-u1: Make SoC "need recal" check shut up
max17042: Make driver less chatty
sec_battery: Make driver less chatty
modem_if: Stop printing [MIF] messages
arm: remove stale export of 'sha_transform'
lib/sha1.c: quiet sparse noise about symbol not declared
sched: Don't call task_group() too many times in set_task_rq()
arm: remove "optimized" SHA1 routines
lib/sha1: use the git implementation of SHA-1
config: Set country/region code
keyboard: cypress: Ensure light is off, enable regulator only if needed
mmc: Fix file permissions from N7000 commit
mmc: Pull in N7000 Update3 mmc drivers, disable MMC_CAP_ERASE
update ramdisk-recovery
update ramdisk
***3.07***
use cfq as default
fix recovery error
linux 3.0.34
some more patches from myfluxi and cm kernel
more color adjustment
***3.05***
Linux 3.0.33
fixed wifi toggle issue
same patches from fluxi recovery
and a lot of other patches but sorry i'm very busy at time will add it later
***3.02***
linux 3.0.32
fixed ffc
aosp charger
enable IP tunneling
ubuntu/linaro 4.6.3-11ubuntu5 toolchain
ondemand governor as default
remove mfc firmware
mali: Driver update from N7000 Update 3 sources
more matches to cm kernel
add ACCESSORY_SET_AUDIO_MODE control request and ioctl
usb: gadget: f_accessory: Add support for HID input devices
usb: gadget: f_audio_source: New gadget driver for audio output
sound: mc1n2: Prevent tick-noise when reboot menu selected
usb: gadget: composite: Fix corruption when changing configuration
sched_rt: fix SCHED_RR across cgroups
keyboard: cypress: Automatically enable BLN while charging
touchscreen: mxt224_u1: Update touch values according to power state
touchscreen: mxt224_u1: Use mxt224_ta_probe instead of writing directly
net: wireless: bcmdhd: Fix division by 0 if dhd_watchdog_ms is 0
net: wireless: bcmdhd: Fix WPS PBC overlap failure
config: enable kernel panic timeout
max8997: Implement Accessory Charger Adapter support
mach-u1: Rework ramconsole init
Add correct microphone code for PX devices
cpufreq: Build smartassv2 as a module
and something more changes
***2.57***
tun as module
adjust touchscreen parameters
disable CONFIG_BUG
lower LOG_BUF_SHIFT 18->14
led button fadeout effect
adjust panel gamma
recovery fixes
ramdisk cleanup
***2.55***
linux 3.0.31
add brazilianwax gov
a bit more undervolting
brilliant color
sync with latest UKCS
***2.53***
BLN enabled by default
touchscreen sensitivity changes on battery
fixed adb in recovery mode
initial LED breathing effect ( thx fluxi ) needs a app update
initial LED blink function ( thx fluxi ) needs a app update too
new tweakz
color calibration
***2.52***
touchscreen fix ready
net: wireless: bcmdhd: Driver update from SHW-M250S_ICS_Opensource_Update5 ( thx fluxi )
[URL]https://github.com/pinpong/thoravukk[/URL]
****2.50***
mach-u1: solved problem with touch sensitivity
ramdisk cleanup
***2.48***
linux 3.0.30
remove wheatly governor
remove lazy governor
cpufreq interactive updated
re-working recovery
fixed nandroid backup
fixed led timout always off/on
vibrator level default4
power: raised polling interval and usb charge current
Timer frequency: 300Hz
Makefile: Compile with -Ofast
remove app from boot.img ( now you need to download in app thread [URL="http://forum.xda-developers.com/showthread.php?t=1616426"][APP]Thoravukk Control for Thoravukk Kernel [/URL]
***2.45***
App: some fixes [COLOR="Red"]( before you flash new kernel be sure you have deinstall the old thoravukk control app )[/COLOR]
USB OTG support thx gokhan
remove debugging
re-compiled recovery
***2.43***
Thoravukk-kernel App( beta )
better battery runtime
***2.41***
linux 3.0.29
hope we fix sod's
minore fixes
fuse.ko ntfs support
***2.40***
revert: Switch to Gingerbread legacy hotplug
update interactive Governor
remove lot debugging and tracing
revert: 1200MHz lowered voltage
for completely chngelog check [url]https://github.com/pinpong[/url]
***2.39***
fix permission
Joe's RCU
Switch to Gingerbread legacy hotplug ([COLOR="Red"] testing[/COLOR] )
more on github [URL]https://github.com/pinpong/thoravukk/commits[/URL]
***2.37***
update ramdisk
fix for bootsplash changer
cleanup
update recovery
1200MHz lowered voltage
***2.35***
[COLOR="Red"]now we have a great ics kernel [/COLOR]
should work now with newer and older aosp roms
more optimizations
update recovery
[COLOR="Red"]switched mountpoints for sdcards to match cm standard:
/mnt/emmc = internal storage
/mnt/sdcard = external sdcard[/COLOR]
[url]http://forum.xda-developers.com/showpost.php?p=25027440&postcount=25700[/url]
***2.32***
same as 2.30 but will work with newer cm9 nightlys
***2.30***
back to 2.21 cpu driver and enable 1400&1600MHz ( i think i will remove 1600Mhz next version )
led_timout back to 500
more compiler optimization
***2.28***
change to stable cpu drivers. 200MHz-1400MHz
led_timeout 250 as default
***2.25***
cpu voltage fixes
***2.24***
fix permission ( init.d should work fine now ) it will fix the VC conflict
remove 300,400,600,900MHz frequencies
stripped modules ( thx saturn_de for the good idea ) we get smaller modules
remove ext4 remount script ( it's useless )
***2.23***
CPU: Now with 16 steps ( thx homura/fluxy )
J4FS Module for custom bootlogo thx codeworkx & sakuramilk to gimme some input
more cleanup
add lippol94 kernel cleaning script
remove cleanup.sh
***2.21***
Linux 3.0.28 upgrade
recovery-ramdisk cleanup
ramdisk cleanup
change touchscreen sensitivity
**2.19***
enable CIFS
CGROUP_TIMER_SLACK
Add adjustable vibrator levels
Performance improvement
***2.17***
Patch to linux 3.0.27
disable pegasusq governor
set leds on for 1 secs as standard
change recovery color
set the right path for sd and sd-ext in recovery
disable more kernel debbuging
sio tuned for flash device's
set lulzactive as default
***2.16***
initramfs cleanup
hope we fix kernel_panic
Touch recovery thx sk8erwitskil
Use other way to copy liblights ( now it should work without problems )
Set sakuractive as default governer
***2.03***
init.d support
modded initramfs
add wheatley governer
add cpu overclocking thx gm
CPU Overclocking & Undervolting support thx gm
GPU Overclocking & Undervolting support thx gm
BLN auto install
Tegrak second core app support
Tegrak touch move app support
Charging voltage support thx gm
add clean-up script
*neldar *hardcore *koush *sakuramilk *homuhomu
* tegrak *gokhanmoral *cattleprod *creams *arighi *fluxi *sk8erwitskil
*vitalij *thank's to all members of team-blockbuster and all i forgot
BIG THANKS TO
*stratosk *saturn_de *mialwe *zacharias.maladroit *simone201 *codeworkx
FOR ANSWER ALL MY STUPID QUESTIONS
OUR APP IS NOW AVAILABLE ON MARKET
Don't forget to press the thanks button.
FAQ:
Q. My device rebooted or crashed, how can I help?
A: Get me /proc/last_kmsg and logcat.
Q. Do I need to wipe anything when flashing this kernel?
A: No.
Q: What is the best cpu/gpu oc/uv settings?
A: Use what you think is the best for you.
Q: You have huge battery drain?
A: It will improve after some time.
Q. For wich Roms i can use this Kernel?
A: Raed the description.
Q. You have Question about Thoravukk Control?
A: Use this Thread [APP]Official Android application for Thoravukk Kernel or send us a e-mail: [email protected]
Q. My device not entering deep sleep if i use Wifi?
A: That's not a Kernel issue! It's a Router and (Windows 7) Network problem. Disable IPv6, IP Helper service, shell hardware detection service and the Windows Media Player Network Sharing Service.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
........................
Helpfull links
[REF][TWEAKS] Kernel Governors, Modules, I/O Schedulers, CPU Tweaks, AIO App Configs
[REF][ICS] Kernel Stuffs - How is ICS Kernel Different | updated Apr 06 2012
[GUIDE] ADB Workshop and Guide for everyone
Click to expand...
Click to collapse
Click to expand...
Click to collapse
..................................
I purchased the app but still can not get bln to work and every time I try to generate boot script it says failed.
Sent from my GT-I9100 using xda premium
Thanx, finally the update is here, now we can use this kernel for our jellybelly rom
:good::good::good::good:
digitalcrash said:
I purchased the app but still can not get bln to work and every time I try to generate boot script it says failed.
Click to expand...
Click to collapse
It seems like i forgot to fix busybox permission.
Wait few min, i'll fix it now and upload a new version.
pinpong said:
It seems like i forgot to fix busybox permission.
Wait few min, i'll fix it now and upload a new version.
Click to expand...
Click to collapse
Can u show us when the update is ready to download..?
Batskoning said:
Can u show us when the update is ready to download..?
Click to expand...
Click to collapse
fixed version is up. sorry again
and yeah i know there is a issue with save as boot.
worse code. we need wait for rohit. he is very busy at time.
gonna give it a shot!
Bln working good now thanks
Sent from my GT-I9100 using xda premium
pinpong said:
fixed version is up. sorry again
and yeah i know there is a issue with save as boot.
worse code. we need wait for rohit. he is very busy at time.
Click to expand...
Click to collapse
If i use voltage control, and make an init.d script, my settings would not restore aftet reboot.
Awesome mate,finally we have thora for our JB roms
THX for the update, i will try now.
---------- Post added at 09:20 PM ---------- Previous post was at 08:54 PM ----------
OK, init.d support works now!
The problem with the script in the APP is known?
Changes made in the thoravukk control app v1.0.1 are gone with every reboot. I hope this can be fixed. Running the kernel v4.3.
Sent from my GT-I9100 using xda premium
-earth- said:
THX for the update, i will try now.
---------- Post added at 09:20 PM ---------- Previous post was at 08:54 PM ----------
OK, init.d support works now!
The problem with the script in the APP is known?
Click to expand...
Click to collapse
+1
App says "failed generating script" :crying:
Anyone know the best governor to maximize screen on time while giving the best battery life. Because I usually have my phone on for about 3 hours and I would like to have the phone last for about a day at least.
So which governor would be the best?
Sent from my GT-I9100 using xda app-developers app
Maybe you should read this post.
http://forum.xda-developers.com/showpost.php?p=19846276&postcount=1
M90 said:
+1
App says "failed generating script" :crying:
Click to expand...
Click to collapse
I have the same problem.
may rofinpie
salocinonurb said:
I have the same problem.
Click to expand...
Click to collapse
I know. It is already fixed but we need a while to update the app. I hope next few days.
does the latest version 4.3 works with cm9
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This kernel is maded for my custom roms like CM10.2 and Mokee OS and (cooming PACMAN ) and add optimization for proper use on these roms.
Hey this thread open because several users were asking me a zip with the kernel, so I decided that would upload, the kernel for those who wish to try.
And u can try this kernel on Other roms
Tested on
OFICIAL PA 3.99
OFICIAL Cyanogenmod 10.2
and more
Features:
For android 4.3
CPU and GPU overclock
proper undervolt
Support for LZ0 and lz4 compression
Gobernators: Gaming,lulzactie,PegasusQ interactive default
I/O schedulers: deadline , v(R) ,sio, CFQ,noop optimizatios
Kexec hard boot support
better battery consumption
F2FS support
ext4 support
And more...
F2FS info
F2FS is a Filesystem so we have to Format our memory in this mode. How can we do this? We need a moded Recovery LIKE TWRP or CWM
So you need format all system , so you need backup all data, music, movies etc
How to install TWRP only extract my zip and execute script
chmod +x fastboot.sh
./fastboot.sh
Enter in the recovery TWRP
make a format data
MODDED RECOVERY:
TWRP-Multirom-F2FS suppor
[/list]
NOTE: If you change data partition to F2FS only use kernel with F2FS support, backups of TWRP normal not work on F2FS because TWRP use EXT 4, you need a moded TWRP like my version or Legolas version.
Backups of TWRP F2FS not work on TWRP normal, I made 2 versions of kernel for data EXT 4 and data format on F2FS
to restore F2Fs to Ext 4 only need flash normally TWRP and make a format Data.
Click to expand...
Click to collapse
Version for Custom roms like CM10.2,MokeeOS,ParanoidAndroid etc
3.2.3-XPerience-10.zip - 4.98 MB
Version for stock 4.3 rom...
3.2.3-XPerience-10-StockRom.zip - 4.97 MB
FOR KITKATEXT 4
CM Paranoid(use CM superuser),MOKEE OS,XPerience(ETC)
3.2.5-XPerience19+-CM.zip - 5.18 MB
AOSP BASED, OmniROM,AnimeROM ETc
3.2.5-XPerience-19+AOSP.zip - 5.16 MB
F2FS data
3.2.5-XPerience-19+F2FSData.zip - 5.18 MB
Sources:
https://github.com/NexPerience/android_kernel_asus_grouper
https://github.com/NexPerience/kernel_asus_grouper_kitkat
NOTE: If you lose root acces in roms like CM, AOKP,CyanFox,XPerience-8.0.0.. USE this...
Installation and usage
- Download the ZIP file (see post below for link)
- Extract the ZIP file
- Boot your device in bootloader/fastboot mode. Usually this can be done by turning your device off, then holding VolUp+VolDown+Power to turn it on.
- Connect your device to your computer using USB
- Windows:
--- Run root-windows.bat
- Linux
--- chmod +x root-linux.sh
--- Run root-linux.sh
- Mac OS X
--- chmod +x root-mac.sh
--- Run root-mac.sh
- Follow the on-screen instructions - watch both the computer and the device !
LINK:CF-Auto-Root-grouper-nakasi-nexus7.zip - 6.89 MB
Click to expand...
Click to collapse
changelog in second post:
Special thnks:
NOT in order
Sgt.meow for Gaming gobernor
google for sources kernel
fat-tire for BFQ scheduler
Chainfire for CF-Autoroot
if forget ur name and u see any from your propierty u can sendme report and I give you credits.
OLDER DOWNLOADS:
3.1.12-XPerience-04.zip - 5.13 MB
3.1.15-XPerience-05.zip - 4.98 MB
3.2.2-XPerience-06.zip - 4.99 MB
3.2.2-XPerience-06b.zip - 4.98 MB
3.2.2-XPerience-07.zip - 4.97 MB
3.2.5-XPerience13kk-MK-CM-PA.zip - 4.84 MB
3.2.5-XPerience13kk.zip - 4.82 MB
3.2.5-XPerience14kk.zip - 4.82 MB
3.2.5-XPerience14kk-MK-CM-PA.zip - 4.83 MB
3.2.5-XPerience15kk.zip - 5.10 MB
3.2.5-XPerience16kk.zip - 5.10 MB
3.2.5-XPerience17.zip - 5.17 MB <--EXT4
3.2.5-XPerience17F2FS.zip <-- F2FS CM based rom
3.2.5-XPerience17F2FSAOSP-OMNI-ANIME.zip <-- F2FS AOSP based rom like OmniROM, AnimeROM, AOSPA
3.2.5-XPerience-18AOSP.zip
3.2.5-XPERIENCE-18CM.ZIP
F2FS ALL
CM Based (Paranoid(use CM superuser),MOKEE OS,XPerience
3.2.5-XPerience18CM-F2FS.zip - 5.16 MB
AOSP Based
3.2.5-XPerience-18AOSP-F2FS.zip - 5.16 MB
Click to expand...
Click to collapse
F2FS Data only (system and Cache on ext 4 )
3.2.5-XPerience18CM-DATA-F2FS.zip thnsk to @frantisek.nesveda for having time to edit the fstab file
I Like my work u can buy me a Coffe with a donation.
XPerience-1x-Cooming soon
Optimized for cortex-A9
Added XPerience Gobernor
Builded with linaro 4.9.1-08
XPerience-19
Optimized for cortex-A9
Builded with linaro 4.9.1-08
mm:KSM: Optimized
Optimized decompress for cortex-a9
Merged google/android-tegra3-grouper-3.1-kitkat-mr2
tmpfs: fix use-after-free of mempolicy object
tmpfs: fix mempolicy object leaks
lib/memcopy: use glibc version …
sched: LOAD_FREQ (4*HZ+61) avoids loadavg Moire It's perfectly
arm: lzo: faster boot-up process.
ext4: optimize test_root()
between the 2.6.32 and 3.0 kernels. By removing the plug from do_io_submit()
lowmemorykiller: Don't try to kill the same pid over and over
Kernel: process: Short Timeuot for stoping process
Reduce Disk Writes With noatime, nodiratime noatime, nodiratime
CPU hotplug, writeback: Don't call writeback_set_ratelimit() too often during hotplug
mutex: dynamically disable mutex spinning at high load Date
overall_stats: add overall stats for all available cores …
dynamic fsync: favor true case since most will be using this …
overall_stats: make dual/quad core stats configurable via meunconfig
ARM: tegra: clock: Adjust Tegra3 cpu to emc ratio
Some SELinux improvements.
XPerience-18
optimized for Cortex-A9 cpu with Neon-VFPv3 technology support.
Cortex-A9 flags
Fixed Ramdisk for CM based roms (Fix superUSER bug , and FC)
New version ALL F2FS
Optimized Ramdisk for AOSP variants
- Released 4 versions
--CM Based
-- AOSP Based
-- ALL F2FS CM
-- ALL F2FS AOSP
XPerience 17
VFP NEON mode
ext4: speed up
Now fully support to F2FS[Flash-Friendly File System] (for animerom, Cyan-FOX, XPerience-8.0.0)
Now builded on linaro 4.8.3 last version are builded on 4.7.4 x_x
Fixed some issue with USB OTG (yes I Bought A OTG TO test it x___x )
Sleepers are unused so I delete it
Ramdisk fixes now this version works on CM based roms and AOSP based roms (on CM fixed problems with changes of CPU freq)
Doubletaptowake Optimized response
used -mtune=cortex-A9 -VFPv3 flags for linaro
Some optimizations on RAMDISK
XPerience 16kk
Sweep2sleep
Doubletap2Wake
Add prevent_sleep functionality
Enaled by default SW2S/DT2W
Elan Touchscreen updates ektf3.c
Updated Interactive gobernor
sleepers
XPerience 15kk
VR shceduler
GPU OC set to 500mhz
Loadable modules enabled
Fast FPE (optimize Float point emulation (Optimize Floating point calculations)
enabled tegra_rq_stats
Re-enabled TCP configs and added more like, RENO,ILINOIS,Westwood+,Hybla,H-TCP,VEGAS,low priority,veno,YeAH tcp,scalable,High speed--- By default Westwoot+
Builded by XPerience-Linaro-4.8.314.01-(Optimized for Cortex-A9 and Cortex-A15)
LZ4 compression
Fix broken wifi on AnimerORM beta 2 and superUSER ACCES ON ANIMEROM
XPerience-14kk For kitkat
Added GPU overclock to 800mhz (Experimental) and proper fixes
Add GPU clock control. Allows users to overclock this GPU[4/4]
block: cfq: tweak all CFQ tunables
block: cfq: finally nailed CFQ tunables correctly
block: deadline: hardcode values
block: deadline: XPerience Power
cpufreq: break earlier if the target_freq is equal to the current freq.
XPerience-13kk For kitkat -CM-MokeeOS
Added ramdisk for CM based roms like mokeeOS
XPerience-13kk For kitkat
JRCU daemon Priority set to 0 (more faster to recognition)
Updated ro kitkatMR source
Omnirom and CM11 Ramdisk (kitkat only tested)
Frandom optimizations
CPU and GPU fixes for Proper OC in kitkat
Optimized with flag -O4
Fixed wifi problems on kitkat
MM reclaim some more more memory
Optimized ROW i/o Sched
XPerience-11
fs/dyn_sync_cntrl: dynamic sync control 1.2
-dynamic filesync: add some cache optimizations
-dynamic fsync: add reboot notifier to force flush outstanding data
this should further prevent data corruption from kernel panics and
forced reboots
-dynamic fsync: add kernel panic notifier to force flush outstanding data
fs/dyn_fsync: check dyn fsync control's active prior to performing fsync ops
GPU fixes
XPerience-10!
Better background gradients
Added 2 versions for custom rom's and Stock 4.3 rom --> waiting for upload...
New CPU Frecuency
Changed V(R) ioscheduler to ROW
Add support to change LP Overclock (kconfig on git)
Support to Custom Brightness (more efficient)
Re-enabled KSM support
and OABI support
Changed CONFIG_RWSEM_XCHGADD_ALGORITHM to CONFIG_RWSEM_GENERIC_SPINLOCK
More volts to improvements
Fixed boot V9 not boot and overheats the microprocessor and graphics.(fixed)
Fixed graphical issues and bad performance in games like Asphault 8
Reverted CPU OC to 1.6ghz
Westwood TCP scheduler as default
XPerience-09 NOT RELEASED!
Revert changes of CPU AND GPU NEW Frecuencies
Reverted some new voltages
changes on kconfig
gdwarf-2 flag
XPerience-08NOT RELEASED
Fixed GPU frecuenses GPU OC default 700
some changes
XPerience-07b
Removed GPU DVF
Reverted RWSEM algorith (cause dead lock and screen off )
Rewrited CPU and GPU frecuences
CPU Overclockeable to 1.7ghz
LP core overclockeable to 700mhz
CPU and LP are changeable now with trickster but in GPU fixed issues that made it to exit the application, the frequency setting will not stay active.
More stability fixes and ramdisk changes
Fixed issues with MX Player (graphical issues)
XPerience-07
Added GPU DVF
RWSEM Algorithm
Fixed build ROW scheduler
Increase VM min-max
ROW hardcode
Added TCP schedulers
Upgraded kernel to XPerience-07
added ro.secure set to 0
XPerience-06b
Fixed: screen flickering issues. (Thnks to @sgt. meow)
Updated some parts of Ramdisk
XPerience-06
Upgraded to 3.2.0,--> 3.2.1--->3.2.2 patches on github
Enabled in configs tegra 3 RQ_Stats
Generic hotplug enabled
Changed Gobernor to interactive.
CONFIG_TEGRA_CONVSERVATIVE_GOV_ON_EARLYSUPSEND
XPerience-05
Build with linaro 4.8 Toolchain
Fix support on Android 4.3.-r2.2
fsync control thnks to ezekeel
hotplug and TEGRA3_RQ_STATS'.
upgrading to 3.1.15
predefined OC GPU to 446mhz
Logger: Add sysfs interface to Enable / Disable Android Logger and added into config.
----
- switching done via /sys/kernel/logger_mode interface
default is 1 (on) you can change this in terminal
Code:
echo "0" /sys/kernel/logger_mode interface
Modular interface for min/max backlight control
JRCU
Upgrading Kernel v to XPerience-05
Optimized CRC32C (Cyclic redundancy check)
Su Fixes in ramdisk
XPerience-04
Changed GPU OG from 700mhz default to 448mhz (modificable using trickmaster mod)
Updated to 3.1.12-XPerience-04
Minimal changes and cleanidg code
change I/O governor to V(R)
Change CPU Gobernor to Lulzactive
Kexec hardboot support
XPerience-03
Kernel upgrade to 3.1.12-XPerience-03
Added Gobernors: Lulzactive,PegasusQ and Gaming (Gaming gobernor forked from Sgt meow github)
Added I/O Schedulers SIO , VR, ZEN
Frandom
CPU Overclock max 1600mhz
GPU Overclock max 766mhz
Ramdisk Su fixes.
LP core overclock to 660MHz
Tegra Quadcore optimizations
LZ4 decompress:
Deadline fixes
backport lowmemorykiller from CAF msm-3.4
XPerience-02
kernel panic changed of 10 to 1
KSM support for page merging
L2x0 cache controller
Security: SELinux
Suspend to RAM and Standby
Ramdisk optimizations and changes
SuperUser Fixes
XPerience-01
BFQ and interactive are default gobernor and I/O scheduler
Kernel Based on AOSP 4.3 kernel
enable SELinux [WIP] (Busybox)
First release
Kernel optimized on LZ0
Great to see 4.3 kernel development for the N7!
Thank you :thumbup:
Sent from my SGH-I317 using Tapatalk 4
Thank you....
Works with MultiROM?
Enviado desde mi Nexus 7 usando Tapatalk 4
aleeexxhh said:
Works with MultiROM?
Enviado desde mi Nexus 7 usando Tapatalk 4
Click to expand...
Click to collapse
from OP. "Kexec hard boot support"
Hi, testing this since yesterday and i can say all seems smoother (even at 1100). It's early to see how the battery is going with this, but if there isn't a noticiable battery drain... this will be my default kernel for cm.
Thanks.
BR.
Made me lose root on latest Rasbean. Reflashing latest SuperSU v1.51 did not fix it. Nonetheless, will test this kernel for a few days.
yukkio said:
Hi, testing this since yesterday and i can say all seems smoother (even at 1100). It's early to see how the battery is going with this, but if there isn't a noticiable battery drain... this will be my default kernel for cm.
Thanks.
BR.
Click to expand...
Click to collapse
tibere86 said:
Made me lose root on latest Rasbean. Reflashing latest SuperSU v1.51 did not fix it. Nonetheless, will test this kernel for a few days.
Click to expand...
Click to collapse
thnks , any issue please report
ive been using this kernel ever since the mokee rom and this update for kernel came out.its the best ive used so far. wondering though if its causing carbon rom to not charge?? on the mokee it runs perfect.
Same here, lost root on rasbean, and on cleanrom. Then it is no easy way to get root back, switch kernel doesnt help for me at least. I need to have root where I live, so only quick test, but kernel makes the system very fast and responsive.
ksss said:
Same here, lost root on rasbean, and on cleanrom. Then it is no easy way to get root back, switch kernel doesnt help for me at least. I need to have root where I live, so only quick test, but kernel makes the system very fast and responsive.
Click to expand...
Click to collapse
ONLY NEED Download superSU form markent and install binary using TWRP or CWM option
and Root work.
@TeamMex
I am unable to increase GPU max freq using trickster MOD (DONATION)....whatever I do, it switches back to 484....what can be the problem...?????
hassam_tariq2003 said:
@TeamMex
I am unable to increase GPU max freq using trickster MOD (DONATION)....whatever I do, it switches back to 484....what can be the problem...?????
Click to expand...
Click to collapse
yes u can upload with trickster but im not use donate version.
can u share me logcat?
TeamMex said:
yes u can upload with trickster but im not use donate version.
can u share me logcat?
Click to expand...
Click to collapse
hOW TO MAKE LOGCAT...????
adb logcat > logcat.txt
not install
TeamMex said:
not install
Click to expand...
Click to collapse
where is the link for v5???
podagee said:
where is the link for v5???
Click to expand...
Click to collapse
I upload zip wrong , a zip that installed a kernel that did not work.
Added link now
any issue with SuperUser change Su binary use SuperSU its recomended.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
*** Disclamer***
Code:
Your warranty is now void.
We are not responsible for any damage or problems you may have!
YOU are choosing to make these modifications.
Introduction
First of all I want to say this that is one project which just started and gradually we will improve it. In this community there are very good developers and we are not traying to compete with them. This is just a hobby and we do it because we like Android. This kernel is only for N7100 and we don't have plans to make it compatible with other versions of Galaxy Note II. We hope that you will not only download the kernel but also you will sent your comment with pros and cons and you should respect our efforts.
Don't be scared by the nightly denomination of the kernel, I'm just taking the traditional naming scheme where nightly designates feature development
Click to expand...
Click to collapse
Features:
Code:
[COLOR=DimGray]Based on Samsung Source code N7100XXUFND3
Compiled with GCC 4.7
Linux version 3.0.101
Overclock to 2000MHz
Dynamic FSyn control
Wolfson Sound
GPU OC/uV
Advanced TCP control
Multicore Power Saving
Charging Control
CPU Voltage control
LED Control
ABB Control
MDNIE mode Hijack
Android Logger mode
zzmoove governor
Lulzactiveq governor
Touchwake
Touchboost
slide2wake
Frandom - random number generator
F2FS support
Synapse support[/COLOR]
Installation instructions
You need TRWP 2.6.3.2(recommended)+ or Philz(6.25) Recovery
Download Zip push to Ext or Int Sd Card
Install zip and Restart
Click to expand...
Click to collapse
Downloads
Note: Nadians Losing Root after flashing the Kernel, Re-flash the Kernel to gain Root Access.
Current Versions:
Nadia nightly r7 Mediafire
Nadia nightly r7 MEGA
MALI BLOBS for NG3-NG4: MALI LIBShttp://www.mediafire.com/download/d6y3zgy6wdjvv8g/Mali_blobs_for_NG3-NG4.zip
Note: If you coming from r5+ delete data of synapse before flash the kernel!
Synapse Kernel Control App
Previous Versions:
Nadia r6.1.1 Mediafire
Nadia V6.1 Mediafire
Nadia nightly r6 MediaFire
Nadia nightly r6 MEGA
r5.1 Media Fire
r5 Mediafire
r5 Mega (Mirror)
Nadia nightly r4
Nadia nightly r4 MEGA mirror
Nadia nightly r3
Nadia nightly r2
Nadia nightly r1
Click to expand...
Click to collapse
September- 20 -2014 nightly r7
- Zzmoove updated to V0.9 beta4
- Corrected L1 cache shift
- Increased force_max_zoneorder to 12
- Disabled multicast when is sleeping
- cleaned some files
- sched_fair: reduced latency
- sched_fair: optimized cgroup_pick_next_task_fair()
- sched_fair: implemented smarter wake-affine logic
- cpuidle: removed cross-cpu IPI by new latency request.
- Added extra free kbutes tunable
- Added Xbox controller support as module
- Added NTFS support as module
- Added support to ppp-widget
- Enabled max freq for busfreq opp
- Added early suspend delay to userspace
- Updated mali driver to r3p2 rel4
- Added key disabler for cypress-touchkey
- Enabled negative mode compatibility of newer MDNIE drivers (Synapse)
- Added new page in Synapse for Live Statistics (Time in states, Uptime,etc.)
- /sbin nadia.sh values moved to init.d
Synapse and all available options:
- LIVE STATISTICS: Time in states, Uptime,etc.
- CPU - GOV: current frequency, CPU and Battery temperatures, current CPU cores online, CPU MAX and MIN frequency, CPU Governor, Governor tunables.
- CPU voltage: separate frequency voltage.
- GPU: GPU scaling freqyency and treshold steps.
- I/O: schedulers, internal storage read-ahead, externalSD read-ahead and Dynamic FSYNC.
- CPU DRIVERS: cpu multicore power saving, cpu idle mode, logger mode, touchboost settings.
- ABB settings
- Kernel tweaks: low memory killer, kernel entropy, panic and panic on oops.
- NETWORK: tcp congestion control, hardering the TCP/IP stack to SYN attack,ignore pings,etc.
- VM-FS: dirty radio, swappiness,etc.
- BATTERY: charge control
- SOUND: Wolfson Sound control
- MDNIE: mdnie mode and scenario
- LED: Blinking effect, led intensity and spee led.
- Touchwake: touchwake config
- INFO-reboot: info about kernel,etc.
Click to expand...
Click to collapse
Previous Version Change log:
August- 1 -2014 nightly r6.1.1
- fixed HDMI Audio issue
July- 31 -2014 nightly r6.1
- sysfs interface to Enable / Disable CRC
July- 25 -2014 nightly r6
- Linux version upstream to 3.0.101
- More stability, better battery life and performance
- Mdnie mode hijack (Yank555.lu) as default has standart samsung values.
- mmc: disabled CRC (improved performance)
- Zzmoove Version 0.9 beta3
- dync_sync_cntrl: updated to 1.2
- fixed the workqueue overload battery waste
- Test Autogroup patch for agrouping into UserID and not TaskID.
- fixed touchboost facing issue in synapse
- fixed logger mode facing issue in synapse
- Pegasusq tweaked
- Set good sound for Wolfson sound
- Fixed GPU Treshold issue
- Touchboost frequency set to 700MHz as default
- Deleted some scripts from init.d
- Made some changes in the ramfs
- Other minor changes
July- 09 -2014 nightly r5.1
Fixed touchboost frequency in synapse.
Fixed zzmoove permissions
Fixed uV Issue faced by few users.
July- 04 -2014 nightly r5
Based on new Samsung source code XXUFND3
Kernel compiled with Toolchain GCC 4.7
Retain only online cpus in manage_policy->cpus
irq: Set CPU affinity as soon as the irq thread is created
lowmemorykiller: Changed default debug_level to 1
Network speed tweaked
Dynamic Fsync updated to v1.1
Notification LED controls
Zzmoove updated to v0.9 beta2
earysuspend: speedup late resume (faster wakeup of the device)
sched_fair: Reduced latencies
CPU OC to 2000MHz and moved sysfs uV to cpufreq.c
Wolfson Sound Control
Synapse support
June- 13 -2014 nightly r4
F2FS support
GPU frequency and sys interface fixed
power: neutered the cpufreq min samsung interface
power: reduce regulator initializations to regulator minima
sched/nohz: Rewrite, fix and add more accurate load-avg computation
Introduce timer slack controller
Zzmove updated to v0.8
Lulzactiveq updated and added sys screen_off_max_step
sched: Ensure cpu_power periodic update
cpupower: update the cpu_power according to cpu load
ARM: 7011/1: Add ARM cpu topology definition
block/blk-core: add support for Linux 3.0.x for urgent request handling
block: Add support for reinsert a dispatched req
Multicore Power Saving 0 by default
For more info check my github
June 2 nightly r3
GPU OC/uV (Thanks to DerTeufel and Yank555.lu)
Added scripts in init.d for the GPU OC and uV
Proportional Rate Reduction for TCP
Buqfreq: Use cpu_load_slope correctly (Thanks to AndreiLux)
Added zzmoove governor
Added frandom - random number generator
Allocate boot (MMC) partitions on probe
Increase timeout limits for bad sdcard
Add sysfs interface to Enable / Disable Android Logger (Thanks to AndiP)
Asynchronous I/O latency to a solid-state disk greatly increased between the 2.6.32 and 3.0 kernels
Forced Fast Charge (Thanks to Yank555.lu)
Reduced wakelock
Added cpu-boost driver
Implemented Touchwake v1.1a and Touch boost
Added slide2wake (Thanks to DerTeufel)
Cpufreq & hotplug updates
tmpfs: fix mempolicy object leaks
LOAD_FREQ (4*HZ+61) avoids loadavg Moire
Optimized ARM RWSEM algorithm
reg: Fixed memory leak
Optimized square root algorithm
Added ARM optimized crypto algorithms
mm:backing-dev tweak
Deadline iosched updated and tuning
writeback: fix occasional slow sync
Drecreased time to enter sleep
Softirq: reduced latencies
Click to expand...
Click to collapse
May 24 nightly r2 :
lib/memcopy and lib/string use glib version
Added charger control
Added Boeffla Sound Engine 1.6.5
Added Lulzactiveq governor
Added Sysfs_helpers: Allow negative values
added Advanced TCP: westwood by default
Click to expand...
Click to collapse
May 22 nightly r1 :
Based on Samsung Source code SEA_KK_Opensource
Overclock to 1920MHz
Default scheduler = Cfq
Default governador = Pegasusq
Cpu = 1600/200
CPU voltage control
Dynamic FSyn control
Reduced battery-monitor wakelock timeouts
Added SIO, ZEN and ROW
Disabled debug kernel
Adaptive Body Bias control
Improved performance
Fixed cpu scaling above max frequency
Increase readahead value to 1024Kb
Click to expand...
Click to collapse
F.A.Q
Source code:
Code:
https://github.com/Pafcholini/Nadia-kernel-kk_N7100XXUFND3
Thanks To/Credits
@franlov (I want to give special thanks to him for helping me with everything.) @flar2 @franciscofranco @tamirda @Yank555.lu @DerTeufel @wanam @AndreiLux @gokhanmoral @andiP @psndna88 @mat9v @KNIGHT97 @klurosu @mohit14785 @ph03n!x @chobztopz
@ and all users that support the thread and the kernel
You can follow new updates HERE
Hit the "thanks" button if you like my work.
If you think our work it's worth, Invite us for a beer or coffee
XDA:DevDB Information
Nadia nightly Kernel, Kernel for the Samsung Galaxy Note II
Contributors
Pafcholini, Pafcholini, aukhan
Source Code: https://github.com/Pafcholini/Nadia-kernel-kk_N7100XXUFND3
Kernel Special Features:
Version Information
Status: No Longer Updated
Current Stable Version: Nadia nightly r7
Stable Release Date: 2014-09-20
Created 2014-05-22
Last Updated 2015-03-02
Recommended settings & FAQ
Balance between performance and battery
I'm using Synapse (highly recommended)
Read ahead buffer: 1024
IO scheduler: row or zen
Frequency Lock: ON
CPU min freq: 200MHz
CPU max freq: 1600MHz for battery / 1800-1920MHz for performance
CPU governor: Lulzactiveq for both
CPU voltage: -50uV or -100uV (Be careful!! If you low voltages much you can get boot loop or battery drain.)
CPU idle Mode: AFTR+LPA
TCP: westwood for both
Dynamic FSYNC: ON
F.A.Q
Note/Tip: Nadians if there is nything that is missing please PM me I'll add it and in future if you feel anything needs to be added please tag me in that post I shall update it.
1.Which app can control this kernel?
Click to expand...
Click to collapse
Use Synapse Trickster Mod, Devil Tools or Devil Kernel Manager
2. After flashing the kernel lost root what to do?
Click to expand...
Click to collapse
In case you loose root just flash Super SU
3. Any recommended settings to follow using Synapse?
Click to expand...
Click to collapse
at the beginning of the second post.
4. Method to save your configuration Synapse/TricksterMod?
Click to expand...
Click to collapse
thanks to @klurosu
5.How to overclock gpu?
Click to expand...
Click to collapse
You can use Synapse, trickster mod, devil tools or Devil Kernel Manager
6.My apps on sd card look like this and give me force close? My apps on external sd card have that android icon and force close any help please?
Click to expand...
Click to collapse
Go to play store and Reinstall affected app again and do a reboot, done. Don't mess/uninstall anything.
OR
If you have titanium backup just restore specific affected app from it.and reboot your device
Thanks to @optimusPRIME
7.When i listen to music, and turn off the display, the phone uses only 1core of the CPU, and so the music is hanging for a 10th of a second or so in every 10-15 seconds. Probably because the load is too high for 1 CPU. Is this also happening to you guys ? Is there a good way to avoid this? I use the pegasusq governor. maybe i need to use a different one ?
Click to expand...
Click to collapse
Yes, sometimes pegasusq can cause this.
Switch your governor to either lukzactiveq or Zzmove to have good battery and no skipping music along with smooth performance.
I'll give the reason as to why this happens - Pegasusq is a governor designed to handle multicore systems only and it does an efficient job at the smoothness and battery life with those. But the problem is that it isn't designed to optimize and ramp up the single core systems properly so it tries to push the remaining core into deep sleep, which causes occasional stutter in many background tasks like music. Now for that you'll need a governor which can handle multicore and single core systems at the same time and efficiently, while many governors can do the job, but none is as smooth and optimized as pegasusq in a multicore system. Ondemand is suggested by many for the skipping music problem, but the problem with ondemand is that it was made for single to dual core systems only and this leads to lag and slower ramping of frequencies in a multicore system, but provides a battery life comparable to pegasusq.
While all of this might cause confusion for which governor to choose, lukzactiveq is optimized for more battery but smoothness at same time, and ramps up sliwer but preserves battery life when screen is on; while Zzmove ramps quickly and gives a more snappy experience, the battery life a a bit less.
So choose what you want and enjoy @KNIGHT97 thanks for the detailed explanation.
8. What is touch wake? or My Touch wake is not working?
Click to expand...
Click to collapse
It's a feature which will allow you to wake your device when it gets locked after screen timeout.
Try this unlock your device wait for it to auto lock not just tap on display and your device will wakeup no need to push the unlock key.
9. Video Camera stops recording?
Click to expand...
Click to collapse
Fix is: flash your desire rom...take a pic with your camera and a video...then reboot in recovery mode and install nadia kernel.
Thanks to @klurosu
10. How can I change cpu voltage with trickster mod???
Click to expand...
Click to collapse
Open trickster mod go to 4th screen. There you will find section mpu voltages. There you can change it. @mohit141785
11. By default the restriction settings in power saving mode are On even If the mode is Off.Remove CPU restriction and you will get normal work of the rom and better score.
Click to expand...
Click to collapse
Also try with different governors and I/O schedulers. Increase the SD cache to 1024 or 2048 (more than that has no effect and is wasted) and then try, it can sometimes give higher score in the storage I/O, which increases the total score too @KNIGHT97 thanks for the detailed explanation.
12. From where can I remove int.d script?
Click to expand...
Click to collapse
Go to /system/etc/init.d using any root based file manager and delete.
Note: There is an important one related to superSU and if you remove it by mistake you're gonna have trouble with root permissions. @KNIGHT97
13. My device doesn't show any reaction to undervolting (battery life is same as before) or gets unstable even on light undervolting?
Click to expand...
Click to collapse
Use Wanam Xposed and turn off DVFS or user DVFS Module(standalone) (dynamic voltage and frequency scaling), this feature was kept in touchwiz for benchmark boosting purposes and will confkict with any undervolting and custom governors because it scales the voltages and frequency on regular intervals and is framework integrated, so gets a higher priority than kernel based voltage and scaling controls.
For people who don't know what is DVFS please refer Wikipedia.
check @mattiadj thread for more details. @wanam @mattiadj @KNIGHT97
14. Can I use some performance scripts?
Click to expand...
Click to collapse
Yes, you can check @mat9v thread
15. Why is set on boot doesn't stick even though I have set it?
Click to expand...
Click to collapse
First make sure you have set on boot and set on boot notification enabled. If after a reboot you see this notification
Then set on boot was run.
16. Settings don't stick?
Click to expand...
Click to collapse
You might have scripts, other apps, or ROM settings override Synapse settings. In this case Set on boot delay might help if it's for settings at boot otherwise you need to track down and disable the app/ROM settings
17. If settings do not stick then the 2 most likely problems are
Click to expand...
Click to collapse
A1: If you're using chainsdd's superuser switch to koush's superuser or SuperSU.
A2: Make sure you are not using another tweaking app or your ROM has setting that overrides our boot configuration. In that case, “Set-On-Boot delay” feature might help.
Otherwise or if you still have problem, see below
A3: If your frequency settings don’t stick, it's because on certain Qualcomm or JB and higher devices, there are certain system services (thermald/mpdecision/project butter) or kernel service that rewrite frequency settings based on current thermal status and/or touch input. Certain custom kernels for your device should include work around for these issues. Unfortunately, it can't be fixed from app side.
A4: DON'T use a reboot app, they effectively force reboot your phone like a system crashes. If you really have to use it, then do it after the apply grace period or disable grace period by setting it to 0.
A5: You might have scripts, other apps, or ROM settings override Trickster MOD settings. In this case Set on boot delay might help.
A6: Don't force close the app (e.g. in Android Settings). It puts the app in a state that it can't start at boot until user starts the app normally again.
A7: Don't use app like Greenifier to greenify Trickster MOD. Doing so will prevent it to run at boot to apply Set-On-Boot.
A8: The Android BOOT_COMPLETED broadcast might be borked because of theme, mods, or after a few dirty flash. In this case reinstall ROM with a data wipe is needed. This solution is confirmed by our users and as this issue is because of deteriorating ROM with ORD, nothing we can do about it on our side.
A9: If it still doesn't work, please do in in app bug report using the option in the app menu right after Set on boot was run. You can enable Set on boot notification to know that.
Source: Trickster MOD FAQ.
18. Battery Saving Tip
Click to expand...
Click to collapse
Lux Auto Brightness
19. Detailed guide on Battery Calibration, Tips & Tricks to save battery.
Click to expand...
Click to collapse
Here
20. I made a logcat but my file is empty. How I can "fix" it?
Click to expand...
Click to collapse
By default Android logger is disable. Go to Synapse > CPU DRIVERS and enable Logger Mode.
nice☺
Sent from my GT-N7100 using Tapatalk
Thanks. Custom kernels are one of the few reasons I'm still using my Note2.
By the way is it possible to implement the mdnie controls from Perseus or devil kernel ?
darkchazz said:
Thanks. Custom kernels are one of the few reasons I'm still using my Note2.
By the way is it possible to implement the mdnie controls from Perseus or devil kernel ?
Click to expand...
Click to collapse
Yes in future release I'll implement new features.
Enviado desde mi GT-N7100 mediante Tapatalk
this is the first kernel for kitkat, tomorrow i will guive feedback. thanks for your release
after one day of use, really good
@Pafcholini can u add more cpu governor..btw nice kernel..smooth..?
Sent from my GT-N7100 using Tapatalk
Azhery said:
@Pafcholini can u add more cpu governor..btw nice kernel..smooth..?
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
Yes, I'll add lulzactiveq, etc . Just give me a few days to do it.
PS: if I have time tomorrow I'll add some features and I'll upload the r2.
Enviado desde mi HTC One mediante Tapatalk
how about battery drain?
guma55 said:
how about battery drain?
Click to expand...
Click to collapse
Is early to say it but it looks good.
Enviado desde mi HTC One mediante Tapatalk
error: no automatic screen lock. XXUND4 version of Vietnam
Gửi từ GT-N7100 của tôi bằng cách sử dụng Tapatalk
Nice kernel buddy. Hoping to see following features in next update.fast charge. Lullzactive. Gpu overclock.
Which app can control this kernel, mate?
Sent from my GT-N7100 using XDA Free mobile app
le vien said:
Which app can control this kernel, mate?
Sent from my GT-N7100 using XDA Free mobile app
Click to expand...
Click to collapse
use trickstermod app..
Sent from my GT-N7100 using Tapatalk
great work but i have small pb :
lost my root :/
when receive call i have black screen
have you one idea ?
Thanks for your hard work
brolee93 said:
great work but i have small pb :
lost my root :/
when receive call i have black screen
have you one idea ?
Thanks for your hard work
Click to expand...
Click to collapse
u need flash supersu in recovery..i dont know..bcoz i dont have any receive call today..which rom are u using??
Sent from my GT-N7100 using Tapatalk
brolee93 said:
great work but i have small pb :
lost my root :/
when receive call i have black screen
have you one idea ?
Thanks for your hard work
Click to expand...
Click to collapse
Worked fine for me, no loosed root, no black screen while incoming calls...etc... Good job mate.
Sent from my GT-N7100 using Tapatalk
brolee93 said:
great work but i have small pb :
lost my root :/
when receive call i have black screen
have you one idea ?
Thanks for your hard work
Click to expand...
Click to collapse
What rom are you using ? Not is normal . Make cache and dalvik cache .
Enviado desde mi HTC One mediante Tapatalk
Will it support DN3
Sent from my GT-N7100 using Tapatalk
aukhan said:
Will it support DN3
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
yes..work well on dn3 v5..☺
Sent from my GT-N7100 using Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
KRAKEN Saving and Xtreme Series
INTRODUCTION
KRAKEN Series is a brand new project which aims to give you an optimal relation between performance and battery life without limiting the "feauture" list or the "performance" of your device!
KRAKEN is ment for gamers and people who want to experience the maximum out of their software and hardware, it also comes packed up with a further power saving optimization. Which will help you save some juice for later on or even for the next days. Unlock your Qualcomm Snapdragon 410 to it's maximum with KRAKEN R5 Series!
Flash the best kernel out there for stock based roms and discover a brand new experience!
GOALS
General Perfromance gains up to 30% against the competition
Optimization gains up to 60% against the competition
Implemented patches,tweaks and features gains up to 50% against the competition
SUPPORTED VARIANTS
SM-A300FU
SM-A500FU
SM-A500M
SM-A500H
SM-A500F
FEATURES -X Series
Custom Voltage Control
> Let's you Undervolt your CPU. If you don't know what is this, don't play with it! Even if Undervolt can't harm you!
OTG Support
> Let's you connect your USB storage to the phone
Adreno Idler
> Ramps down more agressively, it reaches the lowest clock and it bumps the highest clock harder. Adreno Idler is a great power saver when you don't use your GPU that much
CPU Governors
> KRAKEN has a huge list of governors, test them all and pick up your favorite one. They all are for different usage, I think you know that already!
CONSERVATIVEX
DARKNESS
NIGHTMARE
INTELLIACTIVE
PRESERVATIVE
WAVE
DANCEDANCE
LIONHEART
ALUCARD
BIOSHOCK
UMBRELLA_CORE
INTERACTIVE
POWERSAVE
PERFORMANCE
ONDEMAND
Native 1080p support
> Let's you watch YouTube videos in 1080p just like that
Unlocked SoC frequency
> Unlocks the default clocks of the entire SoC, which where clocked down or removed by SAMSUNG
CPU: 1.4GHz
GPU: 465MHz
emmc: 200MHz
Overclock
> Let's you pick higher clocks rather than the stock ones
GPU: 620MHz
BUS: 535MHz
Dynamic Sync
>
Supports
Permissive mode
Enforcing mode
KCAL
> Let's you change display colors or their gamma
PRIMA WLAN
> This is the WI-FI default driver inside KRAKEN
LA.BR.1.2.6_rb1.9 version with proper module
RAMDISK
> Loads optimizations and default settings while booting
Slim
> RAMDISK conatins only the stuff we really need in order to boot
Coded only for what we really need (KRAKEN settings)
> This means the RAMDISK is packed already with KRAKEN optimization codes
KNOX 0x0
> This fakes your KNOX status to 0x0
Battery
Fast Charge
> Let's you charge your phone faster
Charger Control
> Let's you control anything along the battery and the charging process
Charging with 1.2A (J5)
> Forces J5 to charge using 1.2A
Thermal solution
Default
Thermal throttle above 80 degrees
Thermal throttle can be set via the userspace
Sound Control 3.6
> Let's you tweak your volume sound
FEATURES -S Series
WIP
INSTALLATION INSTRUCTIONS AND REQUIRMENTS
REQUIRMENTS
Please be sure to flash your ROM once again if you are using anything older than R5, sadly previous series inject modules and settings which won't be compatible with R5.
To be sure you won't experience any problems I suggest you to use KRAKEN R5 over fresh installed ROM without flashing other "competitor" Kernels or older KRAKENs
INSTRUCTIONS
make sure you have TWRP installed
download the provided zip and put it into the storage
enter your recovery
flash the precedent downloaded zip file
reboot and enjoy your experience with KRAKEN
GROUPS
Telegram: KRAKEN Series Group
CREDITS
Samsung
arter97
franciscofranco
Faux123
Testers
and many others
XDA:DevDB Information
KRAKEN, Kernel for the Samsung Galaxy A5 and A3
Contributors
Bulgaricus
Source Code: *** Mod edit: link removed, thread closed, not GPLv2 compliant ***
Kernel Special Features: Adreno Idler, Custom Governors, Stable, Overclock, OTG and more
Version Information
Status: Stable
Current Stable Version: R4
Stable Release Date: 2017-06-22
Current Beta Version:
Beta Release Date:
Next Beta Version: R5
Next Beta Release Date: 2017-09-23
Created 2017-04-03
Last Updated 2017-09-08
XDA:DevDB Information
KRAKEN, Kernel for the Samsung Galaxy A Series
Contributors
Bulgaricus
Source Code: *** Mod edit: link removed, thread closed, not GPLv2 compliant ***
Kernel Special Features: Overclock,OTG,1080p,Governors,Voltage Control and more
Version Information
Status: Stable
Current Stable Version: R4
Created 2017-04-03
Last Updated 2017-09-09
DOWNLOADS
> This section provides STABLE builds. Builds here are tested and optimized. Let's say those builds are ready to be flashed and work like charm!
*** Mod edit: link removed, thread closed, not GPLv2 compliant ***
> Link for the Xtreme Series, find your device and download the latest version or the one you prefer!
*** Mod edit: link removed, thread closed, not GPLv2 compliant ***
> Link for the Saving Series, find your device and download the latest version or the one you prefer!
Adreno Addon
> Link for the TOUCHWIZ Adreno blobs, they will boost your GPU performance
Secure Storage Patch
> Link for the SecureStorage patch for KRAKEN, If you don't want to turn off your SecureStorage just flash this little patch that will solve it for you!
CHANGELOG
> This section provides a huge list of changes in each new RELEASE(Rx)
R5-X-S
XX/XX/2017
drivers: clk: added custom voltage control
arch: uses default qcom GPU file
arch: Increase CPU bark/pet time
drivers: clk : clock-gcc-8916: Support 200MHz for emmc
drivers: clk: gcc-8916: add 160Mhz and 177MHz to SDCC tables
arch: arm: configs: msm8916_sec_defconfig: ENABLE Global Platform OTG support
arch: arm: msm8916-gpu: drop the Speed Vectors
Introduced Adreno idler for devfreq-based Adreno devices
adreno_idler: switched to count based instead of time based
adreno_idler: removed frequency bump
adreno_idler: fixed type definitions
adreno_idler: fixed typos
adreno idler: Forced to ramp down more agressively
drivers: added custom CPU governors
drivers: mmc: disabled software CRC to boost performance by 30%
msm: thermal: added a module param to change the thermal throttle temperature
merged qualcomm ptp patch
tweaked the network speed
R4
25/06/2017
Added support for A5F
Implement 1080p (A5F and A3FU)
Increased CPU bark/pet time
Added custom voltage control
Implemented Sound Control 3.x
Implemented CPU-Boost
Implemented Touch-Boost
Patched J5 series to use 1A while charging (fastcharge)
Disabled DRM Authentication
Deprecated the coprocessor register access in ARMv8 with proper optimizations
Removed Knox stuff from the system (script)
Implemented support for samsung's securestorage
Implemented Knox 0x0
Implemented Fast-shutdown
Implemented a lot of ARM patches
Implemented NEON, VFP, AES , SHA1 and SHA2 support
Implemented Full ARMv8 Crypto Support
Optimized NEON and ARMv8 to the maximum possible while running ARMv7
Updated NEON AES to the latest OpenSSL
Updated Ondemand Governor
Optimized SLUB
Reverted older clocks, default is 1.4GHz
Disabled a bunch of debuggers
Optimized MDSS
Reduced the CPU Load-Average drastically
Fixed the CPU High-Load due to few drivers
Implemented Fast-IDLING for CPU
Reduced the swappiness to 30%
Reduced vfs cache pressure to 50
Built using neon,vfpv4 and softfp flags
Various CPU optimizations (ARM)
Small Undervolt out of the box
Added support for clock-pm (msm8916)
Disabled Samsung's Rooting Prevention
Disabled Samsung's Limiter
Disabled Samsung's Mobicore support
Disabled Samsung's KNOX SDP and DLP support
Enabled power_aware (msm8916)
Tuned-up RAM for performance and 533MHz will sync with each clock speed higher than 1190400MHz
Increased the CPU maximum current limit to 165000 uA (system)
Added back the hotplug feauture
Optimized Battery Usage (Kraken)
R2
19/06/2017
Kernel: Built from scratch
Kernel: Linux 3.10.54
Kernel: Permissive out of the box
Kernel: Min and Max Freq is set in it
CPU: OC up to 1.4GHz
CPU: support of various governors (alcuard is the default)
Ramdisk: light without any sort of crap or scripts
Ramdisk: Init.d support
Ramdisk: Arch-Power is implemented
GPU: Fixed the Vectors
GPU: OC up to 720MHz, runs on 550MHz
GPU: Introduced Adreno_Idler with it' proper patches
GPU: Will report correct frequency in sysfs
GPU: Use ADRENO_DEVICE_ATTR for wake_nice
eMMC: Enabled dynamic Qos for SDC1
eMMC: set the max clock frequency to 200MHz
eMMC: Added a 177.77MHz to the SDC2 clock table to avoid the problematic 200MHz clock jitter problem.
eMMC: Also added 160MHz to both SDC1 and SDC2.
Thermal: Above 80 degrees it will throttle
Battery: Fast Charge
Battery: Added Security Charger Controls
I/O Schedulers: added BFQ and FIOPS
I/O Schedulers: optimized Deadline
mmc: disabled software CRC
Display: Added back the KCAL driver
WLAN: Updated to LA.BR.1.2.6_rb1.9
WLAN: Fixed MAC Adress change
USB: Enabled OTG support (A series)
TCP: Set westwood as default
TCP: Enable all the other TCPs
Various: enabled multi-core power savings support
Various: Dynamic Sync support
Various: Built-In 1080p support
Performance: It got boosted a lot
R1
02/04/2017
fixed every single reboot
fixed warnings inside the compile process
fixed armv8 optimization crash, causing hot reboot and random slowdowns
fixed the radio (added the module to the zip)
fixed a huge amount of bugs and problems inside the kernel
built from scratch
based on a500fuxxu1cpg2 source
kernel got updated to linux version 3.10.60
added prima wlan driver
added msm_hotplug
kernel got tuned-up for cortex a53/armv8 architecture
enabled otg support (a series)
allowed to set selinux as permessive
added sound control 3.6
fixed the gpu bus speed vectors
overclocked the gpu to 720mhz
locked the gpu to 550mhz
underlcocked the gpu to 100mhz
overclocked the cpu to 2.11ghz
locked the cpu at 1.4ghz
cpu now has real clocks
added 24 cpu frequencies
underclocked cpu to 50mhz
fixed few audio-effects problems inside the kernel
fixed memory leak issue in the radio-iris
added nvidia cpu relaxation patch
various cpufreq improvements
enhanced cpu power efficiency
mutex now will save power
optimized task-search for upto 6% increase in performance
optimized integer sqrt. For upto 3x faster operation
optimized console framebuffer for upto 70% increase in performance
optimized task_sched_runtime for upto 20% increase in performance
reduced cpu load-average
reduced cpu average-load drastically
fixed high-load average due to drivers
avoid loadavg
implemented fast-idling of cpu
enabled arch-power feature
mmc: Disable software crc
added dynamic sync 2.0
added vibrator control
enabled the touchboost
added msm_limiter tuned-up for kraken
enabled real fast charge (from 800ma-1300ma)
enabled multi-core power savings
tcp are back, default is westwood
pushed the cpubw to 540mhz
added quickwakeup driver
enabled dynamic dirty page writeback
added sec charger controls for the battery
increased the cpu bark/pet time
added powersuspend 1.7
ramdisk optimizations
fake knox 0x0
thermal throttle limit is set to 50 degrees
BETAS
> This section provides BETAs on an early stage, benchmarks and general performance might be bad! Those are BETAs they will be bugged so be sure to have a backup if anything goes wrong!
*** Mod edit: link removed, thread closed, not GPLv2 compliant ***
> Link for the BETA Kernel folder, find your device and download the latest BETA version or the one you prefer!
Awesome work m8 I r8 8/8
Wifi fix, dont work.. But I can do it wrong... How to flash modem.bin via odin?
i used it odin 3.07, i put it modem.bin in PHONE package, and flash is succesfull, but wifi dont turn on...
Sorry for my bad english..
SM-A500FU 6.0.1 Touchwiz ROM
bend4994 said:
Wifi fix, dont work.. But I can do it wrong... How to flash modem.bin via odin?
i used it odin 3.07, i put it modem.bin in PHONE package, and flash is succesfull, but wifi dont turn on...
Sorry for my bad english..
SM-A500FU 6.0.1 Touchwiz ROM
Click to expand...
Click to collapse
weird, can you please provide me info about ur baseband? if i ain't wrong you must flash it via AP
have this kernel bootable on ressurection remix rom,no need for wifi fix,only changed ramdisk.but its just for test.
-CALIBAN666- said:
have this kernel bootable on ressurection remix rom,no need for wifi fix,only changed ramdisk.but its just for test.
Click to expand...
Click to collapse
it's only for stock, at least for now
my phone firmware file is "A500FUXXU1CPH3_A500FUOXX1CPH1_A500FUXXU1CPH3_HOME.tar.md5"
---SM-A500FU/XEH/A500FUXXU1CPH3/A500FUOXX1CPH1/A500FUXXU1CPH3/A500FUXXU1CPH3--- copy in SamFirm
i try flash the fix via odin 3.07 and odin 3.12.3 (3.12.3 only work if modem.bin to give .tar file)
wifi still not working
bend4994 said:
my phone firmware file is "A500FUXXU1CPH3_A500FUOXX1CPH1_A500FUXXU1CPH3_HOME.tar.md5"
---SM-A500FU/XEH/A500FUXXU1CPH3/A500FUOXX1CPH1/A500FUXXU1CPH3/A500FUXXU1CPH3--- copy in SamFirm
i try flash the fix via odin 3.07 and odin 3.12.3 (3.12.3 only work if modem.bin to give .tar file)
wifi still not working
Click to expand...
Click to collapse
that is the problem, sadly samsung released source for an older firmware! This means CPH3 is not supported, it's weird that the modem.bin is not fixing it :0... other friend flashed he has CPH3 and he fixed his wifi
Ported it to this, and it's stable links tomorrow and also the thread will get updated with better look and stuff!:fingers-crossed:
@Bulgar, it feels really good to have more devs and cookers around these threads.
Just in case, could you in any way add support for A300FU, they're virtually similar except the display size, and they added the MM sources for it as well.
PlutoDelic said:
@Bulgar, it feels really good to have more devs and cookers around these threads.
Just in case, could you in any way add support for A300FU, they're virtually similar except the display size, and they added the MM sources for it as well.
Click to expand...
Click to collapse
sure provide me ur stock boot.img and i will see what i can do , stable oc settings for cpu are 2.00GHz and 720MHz for GPU since both the phones mount msm8916 i hope it will support it if no i will add lower clocks !
Finally a custom kernel for A5, good work!
I tested this kernel on my A500M and works, but WiFi is broken.
codebseraph said:
Finally a custom kernel for A5, good work!
I tested this kernel on my A500M and works, but WiFi is broken.
Click to expand...
Click to collapse
this ain't nothing my man! cool stuff to come out, if you want support for ur phone provide me stock boot.img
Bulgar said:
this ain't nothing my man! cool stuff to come out, if you want support for ur phone provide me stock boot.img
Click to expand...
Click to collapse
I attached the boot.img
And, you have plans to make compatible with AOSP based ROMs?
codebseraph said:
I attached the boot.img
And, you have plans to make compatible with AOSP based ROMs?
Click to expand...
Click to collapse
Thanks for the image, I don't think I can build 30 kernels for each different ROM I'm trying out the cyanokernel
i hope other variant also support of this kernel...especially a500f variant..
leviz0689 said:
i hope other variant also support of this kernel...especially a500f variant..
Click to expand...
Click to collapse
A friend of mine will build a500f kernels