Related
Hello. (my English is bad. Sorry)
My phone is hard brick. I reinstalled the bootloader using the blankflash software. I'm entering fastboot to install new software. I get the following errors when I load the commands.
Code:
PS C:\adb\4> fastboot flash partition gpt.bin
target reported max download size of 536870912 bytes
sending 'partition' (142 KB)...
OKAY [ 0.005s]
writing 'partition'...
(bootloader) Validating 'gpt.default.xml'
(bootloader) Security version downgrade
(bootloader) Image primary_gpt failed validation
(bootloader) Preflash validation failed
(bootloader) Security version downgrade
(bootloader) Image primary_gpt failed validation
(bootloader) Preflash validation failed
(bootloader) Security version downgrade
(bootloader) Image primary_gpt failed validation
(bootloader) Preflash validation failed
(bootloader) Security version downgrade
(bootloader) Image primary_gpt failed validation
(bootloader) Preflash validation failed
(bootloader) Cancelling 'gpt.default.xml'
FAILED (remote failure)
finished. total time: 0.218s
Code:
PS C:\adb\4> fastboot flash recovery recovery.img
target reported max download size of 536870912 bytes
sending 'recovery' (32772 KB)...
OKAY [ 0.761s]
writing 'recovery'...
(bootloader) Invalid partition name recovery
FAILED (remote failure)
finished. total time: 0.779s
I am getting this error while trying to load 7.1.1 and 7.0.0 stock ROMs.
Devices unbricked before oem-unlock but now oem unlock. Please Help Me. Phone dead
Thank You for already answers
_____
Fastboot Getvar code:
Code:
than size. 0 to disable
PS C:\adb\1> fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8996-91.08(*)
(bootloader) product: sheridan
(bootloader) board: sheridan
(bootloader) secure: yes
(bootloader) hwrev: P3B
(bootloader) radio: 2
(bootloader) storage-type: ufs
(bootloader) ufs: 32GB SAMSUNG KLUBG4G1CE-B0B1 FV=0800
(bootloader) ram: 4GB SAMSUNG LP4 DIE=8Gb M5=01 M6=05 M7=00 M8=08
(bootloader) cpu: MSM8996
(bootloader) serialno: 8eaeed13
(bootloader) cid: 0x0032
(bootloader) channelid: 0x40
(bootloader) uid: 91E2E23300000000000000000000
(bootloader) securestate: oem_locked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 536870912
(bootloader) reason: Failed to initialize partition table
(bootloader) imei: 000000000000000
(bootloader) meid:
(bootloader) date: 01-01-1970
(bootloader) sku: 000000000000000
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time:
(bootloader) ro.build.fingerprint:
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full:
(bootloader) ro.build.version.qcom:
(bootloader) version-baseband:
(bootloader) kernel.version:
(bootloader) xbl.git: xbl.git
(bootloader) rpm.git: rpm.git
(bootloader) tz.git: tz.git
(bootloader) hyp.git: hyp.git
(bootloader) devcfg.git: devcfg.git
(bootloader) keymaster.git: keymaster.git
(bootloader) cmnlib.git: cmnlib.git
(bootloader) cmnlib64.git: cmnlib64.git
(bootloader) prov.git: prov.git
(bootloader) pmic.git: pmic.git
(bootloader) aboot.git: git=MBM-NG-V91.08-0-gab592a8
(bootloader) qe:
(bootloader) frp-state: no protection (err)
(bootloader) ro.carrier:
all: listed above
finished. total time: 0.109s
PS C:\adb\1>
I RSD lite using flash but error phone returned fail.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
byhawk said:
Hello. (my English is bad. Sorry)
My phone is hard brick. I reinstalled the bootloader using the blankflash software. I'm entering fastboot to install new software. I get the following errors when I load the commands.
Code:
PS C:\adb\4> fastboot flash partition gpt.bin
target reported max download size of 536870912 bytes
sending 'partition' (142 KB)...
OKAY [ 0.005s]
writing 'partition'...
(bootloader) Validating 'gpt.default.xml'
(bootloader) Security version downgrade
(bootloader) Image primary_gpt failed validation
(bootloader) Preflash validation failed
(bootloader) Security version downgrade
(bootloader) Image primary_gpt failed validation
(bootloader) Preflash validation failed
(bootloader) Security version downgrade
(bootloader) Image primary_gpt failed validation
(bootloader) Preflash validation failed
(bootloader) Security version downgrade
(bootloader) Image primary_gpt failed validation
(bootloader) Preflash validation failed
(bootloader) Cancelling 'gpt.default.xml'
FAILED (remote failure)
finished. total time: 0.218s
Code:
PS C:\adb\4> fastboot flash recovery recovery.img
target reported max download size of 536870912 bytes
sending 'recovery' (32772 KB)...
OKAY [ 0.761s]
writing 'recovery'...
(bootloader) Invalid partition name recovery
FAILED (remote failure)
finished. total time: 0.779s
I am getting this error while trying to load 7.1.1 and 7.0.0 stock ROMs.
Devices unbricked before oem-unlock but now oem unlock. Please Help Me. Phone dead
Thank You for already answers
Click to expand...
Click to collapse
Download Stock firmware for moto z and flash using rsd lite software on pc.
Loverj said:
Download Stock firmware for moto z and flash using rsd lite software on pc.
Click to expand...
Click to collapse
Red litre software not sure sevince. But before unbrick ser devices.
Rsd Lite flash but returned phone fail.
This was the false Fastboot Image, try another one... The best is, flash the Factory Image with right Bootloader Version, which was the last on this phone before the Brick.
Good evening,
I come from a Lineage OS rom and would like to reinstall the original stock rom.
By using the mfastboot commands my phone will not start anymore.
I am stuck on the page "Your device has benn unlocked and can't be trusted"
Lif3mau5 said:
This was the false Fastboot Image, try another one... The best is, flash the Factory Image with right Bootloader Version, which was the last on this phone before the Brick.
Click to expand...
Click to collapse
Hello. How can I determine the version of the bootloader's original image. How can I flash again.
Guys, why didn't you notice the Data with "fastboot getvar all" before flashing another Rom? This would make it easier to find the right Rom again. I've even made a TWRP Backup before, also if this not barely helped me. But the Security for your Phone is a must, remember this always. Which Stock Factory Android from Motorola did you last have on your Moto Z, including the OTA's? Which Channel/CID do you have before you do this? My Phone was RETEU/RETAIL (50) and 7.1.1 with December Patch, I remember this after unlock Bootloader and flash another Rom...
byhawk said:
Hello. (my English is bad. Sorry)
My phone is hard brick. I reinstalled the bootloader using the blankflash software. I'm entering fastboot to install new software. I get the following errors when I load the commands.
Code:
PS C:\adb\4> fastboot flash partition gpt.bin
target reported max download size of 536870912 bytes
sending 'partition' (142 KB)...
OKAY [ 0.005s]
writing 'partition'...
(bootloader) Validating 'gpt.default.xml'
(bootloader) Security version downgrade
(bootloader) Image primary_gpt failed validation
(bootloader) Preflash validation failed
(bootloader) Security version downgrade
(bootloader) Image primary_gpt failed validation
(bootloader) Preflash validation failed
(bootloader) Security version downgrade
(bootloader) Image primary_gpt failed validation
(bootloader) Preflash validation failed
(bootloader) Security version downgrade
(bootloader) Image primary_gpt failed validation
(bootloader) Preflash validation failed
(bootloader) Cancelling 'gpt.default.xml'
FAILED (remote failure)
finished. total time: 0.218s
Code:
PS C:\adb\4> fastboot flash recovery recovery.img
target reported max download size of 536870912 bytes
sending 'recovery' (32772 KB)...
OKAY [ 0.761s]
writing 'recovery'...
(bootloader) Invalid partition name recovery
FAILED (remote failure)
finished. total time: 0.779s
I am getting this error while trying to load 7.1.1 and 7.0.0 stock ROMs.
Devices unbricked before oem-unlock but now oem unlock. Please Help Me. Phone dead
Thank You for already answers
_____
Fastboot Getvar code:
Code:
than size. 0 to disable
PS C:\adb\1> fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8996-91.08(*)
(bootloader) product: sheridan
(bootloader) board: sheridan
(bootloader) secure: yes
(bootloader) hwrev: P3B
(bootloader) radio: 2
(bootloader) storage-type: ufs
(bootloader) ufs: 32GB SAMSUNG KLUBG4G1CE-B0B1 FV=0800
(bootloader) ram: 4GB SAMSUNG LP4 DIE=8Gb M5=01 M6=05 M7=00 M8=08
(bootloader) cpu: MSM8996
(bootloader) serialno: 8eaeed13
(bootloader) cid: 0x0032
(bootloader) channelid: 0x40
(bootloader) uid: 91E2E23300000000000000000000
(bootloader) securestate: oem_locked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 536870912
(bootloader) reason: Failed to initialize partition table
(bootloader) imei: 000000000000000
(bootloader) meid:
(bootloader) date: 01-01-1970
(bootloader) sku: 000000000000000
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time:
(bootloader) ro.build.fingerprint:
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full:
(bootloader) ro.build.version.qcom:
(bootloader) version-baseband:
(bootloader) kernel.version:
(bootloader) xbl.git: xbl.git
(bootloader) rpm.git: rpm.git
(bootloader) tz.git: tz.git
(bootloader) hyp.git: hyp.git
(bootloader) devcfg.git: devcfg.git
(bootloader) keymaster.git: keymaster.git
(bootloader) cmnlib.git: cmnlib.git
(bootloader) cmnlib64.git: cmnlib64.git
(bootloader) prov.git: prov.git
(bootloader) pmic.git: pmic.git
(bootloader) aboot.git: git=MBM-NG-V91.08-0-gab592a8
(bootloader) qe:
(bootloader) frp-state: no protection (err)
(bootloader) ro.carrier:
all: listed above
finished. total time: 0.109s
PS C:\adb\1>
I RSD lite using flash but error phone returned fail.
Click to expand...
Click to collapse
hai byhawk,
thanks to @erfanoabdi, @Loader009, @trojanbarbosa and the rest of the teams.
from their guide i can fix my problem, but i have Moto Z XT1650-03, since i've been on your state i would like to gave u the link provided from the nice guys here. :cheers:
remember my model is XT1650-03. i don't know if it can be used to other types.
if you have the same device follow this guide.
Blankflash your phone first to get the bootloader working.
https://forum.xda-developers.com/showpost.php?p=74991773&postcount=85
then you can Flash your own Rom
it depends on your retail area, but for advice just flash the 7.1.1 since it cannot be downgraded.
and the last think i did was ADB Sideload Blur Version
this is also depends, but here is the link
hopefully it can fix your problem.
many thank for the team created this fixing guide and program.
:good::good::good::good::good:
need help
my moto z always fail when ill try flash with fastboot command or RSD lite i have bl 91.08 and oem locked anyone can help me?
How
Hello. Which version of blankflash you used. How did you get the hard brick phone out. I have been trying for a month and I can not. Please explain more specifically. He gives me an error: Waiting for firehose. Please help . Thank you .
tijolo duro moto z
olá, amigos estou com um problema na hora de instalar uma rom
meu celular estava com hardbrick conseguir ligar ele porém agora não consigo instalar nada, já tentei várias rom até mesmo o aqui gpt.bin mais novo e não funciona acho que o problema é outro
meu celular é moto z xt1650-3
I solved it somehow. I was able to flash with fastboot the image TWRP 2.8.7 but I can't flash any other TWRP version.
Somebody have any idea why?
Hi guys,
I've got a really big problem that I cannot solve until now so I'm asking for you help.
Some information:
Phone: XT1021 European version
Recovery: TWRP 3.2.0.0
Bootloader: Unlocked (confirmed today)
Flashed: With magisk
Laptop: Ubuntu with adb and fastboot installed
I installed yesterday the newest Version of AOSPExtended of Android 8.1.0 on my device.
Worked flawlessly.
Afterwards I tried to flash the newest TWRP 3.2.3.0.img, so I booted in the recovery and flashed it. After that the recovery was gone and I wasn't able to start the ROM anymore.
My SD-Card broke as well and was only in a read-only-state, so I bought a new one and replaced it.
I followed this guide Unbrick phone and this guide on github with method 5 Github to put my phone back in stock version.
I succeeded to start the Stock ROM and continued to install CWM and flashing SuperSU following this guide SuperSU.
It all worked out. So far so good.
But now I have the problem that I cannot flash any TWRP image. I followed this Guide step by step. After that my laptop shows me this error.
[email protected] ~/Downloads/github $ fastboot flash recovery recoverycwm.img
target reported max download size of 299892736 bytes
sending 'recovery' (8102 KB)...
OKAY [ 0.279s]
writing 'recovery'...
OKAY [ 0.918s]
finished. total time: 1.197s
[email protected] ~/Downloads/github $ fastboot flash recovery twrp-2.7.1.0-condor.img
target reported max download size of 299892736 bytes
sending 'recovery' (6 KB)...
OKAY [ 0.032s]
writing 'recovery'...
(bootloader) Invalid boot image
FAILED (remote failure)
finished. total time: 0.051s
So I'm not able at all to flash TWRP. I tried with different versions and I'm asking for your help.
Thanks a lot.
This is the result of the command fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 500E
(bootloader) product: condor
(bootloader) secure: yes
(bootloader) hwrev: 0x82B0
(bootloader) radio: 0x1
(bootloader) emmc: 4GB Micron REV=06 PRV=12 TYPE=17
(bootloader) ram: 1024MB Elpida S4 SDRAM DIE=4Gb
(bootloader) cpu: MSM8210 CS
(bootloader) serialno: hidden by me
(bootloader) cid: 0x0007
(bootloader) channelid: 0x45
(bootloader) uid: hidden by me
(bootloader) unlocked: yes
(bootloader) iswarrantyvoid: yes
(bootloader) mot_sst: 3
(bootloader) max-download-size: 299892736
(bootloader) reason: Volume down key pressed
(bootloader) imei: hidden by me
(bootloader) meid:
(bootloader) date: 11-03-2014
(bootloader) sku: XT1021
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Mon Feb 22 14: 9:18 UTC 2016"
(bootloader) ro.build.fingerprint[0]: motorola/condor_retde/condor_umts:
(bootloader) ro.build.fingerprint[1]: 5.1/LPCS23.13-34.8-3/3:user/releas
(bootloader) ro.build.fingerprint[2]: e-keys
(bootloader) ro.build.version.full[0]: Blur_Version.23.201.3.condor_retd
(bootloader) ro.build.version.full[1]: e.retdeall.en.DE
(bootloader) ro.build.version.qcom[0]: AU_LINUX_ANDROID_LNX.LA.3.5.1_RB1
(bootloader) ro.build.version.qcom[1]: .04.04.02.048.045
(bootloader) version-baseband: hidden by me
(bootloader) kernel.version[0]: Linux version 3.4.42-g70ad15f ([email protected]
(bootloader) kernel.version[1]: ilclbld72) (gcc version 4.8 (GCC) ) #1 S
(bootloader) kernel.version[2]: MP PREEMPT Mon Feb 22 08:31:09 CST 2016
(bootloader) sdi.git: git=MBM-NG-V50.0E-0-g3ccd862
(bootloader) sbl1.git: git=MBM-NG-V50.0E-0-g20700d2
(bootloader) rpm.git: git=MBM-NG-V50.0E-0-gcebb121
(bootloader) tz.git: git=MBM-NG-V50.0E-0-g65c6b0f
(bootloader) aboot.git: git=MBM-NG-V50.0E-0-g4ed7eaf
(bootloader) partition-type: raw
(bootloader) partition-size:
(bootloader) qe: qe 1/1
(bootloader) ro.carrier: retde
all: listed above
finished. total time: 0.060s
I solved it. I was able to install the TWRP app in Cyanogenmod 12.1 and to flash TWRP 3.2.3.0.
It seems like all the files I downloaded from twrp.me were corrupted so I wasn't able to flash them, so check your md5.
Thread can be marked as solved and closed.
Hello folks!
Long time lurker. Now it's me who's bricked their phone and needs help. I've already put over 30 hs troubleshooting this and I'm out of options.
I'm trying to revive a moto E5 Plus (XT1924-5).I fiddled with it trying to flash it back to stock and relock it.
It now boots directly into bootloader and probably needs stock to be reflashed. The problem is that flashing is locked and I cannot enable OEM unlock since I cannot access system. Information below:
Code:
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8917-BE.4F
(bootloader) product: hannah
(bootloader) board: hannah
(bootloader) secure: yes
(bootloader) hwrev: P3
(bootloader) radio: 1
(bootloader) storage-type: emmc
(bootloader) emmc: 16GB SAMSUNG QE63MB RV=08 PV=03 FV=0000000000000003
(bootloader) ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=1F
(bootloader) cpu: MSM8917
(bootloader) serialno: -----------
(bootloader) cid: 0x0032
(bootloader) channelid: 0x1a
(bootloader) uid: D8912C2100000000000000000000
(bootloader) securestate: flashing_locked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 535822336
(bootloader) reason: UTAG "bootmode" configured as fastboot
(bootloader) imei: -----------
(bootloader) meid:
(bootloader) date: 09-20-2018
(bootloader) sku: XT1924-5
(bootloader) carrier_sku: XT1924-5
(bootloader) battid: SNN5989A
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Sun Dec 29 3: 6:21 UTC 2019"
(bootloader) ro.build.fingerprint[0]: motorola/rhannah/rhannah:8.0.0/OPP
(bootloader) ro.build.fingerprint[1]: S27.91-179-8-9/14:user/release-key
(bootloader) ro.build.fingerprint[2]: s
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.311.14.rhannah.re
(bootloader) ro.build.version.full[1]: tail.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-04400-89xx.0
(bootloader) version-baseband: M8917_34.42.05.98R HANNAH_LATAM_CUST
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-gb6c3df7 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.8 (GCC)
(bootloader) kernel.version[2]: ) #1 SMP PREEMPT Thu Dec 26 12:21:11 CST
(bootloader) kernel.version[3]: 2019
(bootloader) sbl1.git: git=MBM-NG-VBE.4F-0-g8ffb6ee
(bootloader) rpm.git: git=02a0726-dirty
(bootloader) tz.git: git=f9c74b2
(bootloader) devcfg.git: git=f9c74b2
(bootloader) keymaster.git: git=f9c74b2
(bootloader) cmnlib.git: git=f9c74b2
(bootloader) cmnlib64.git: git=f9c74b2
(bootloader) prov.git: git=f9c74b2
(bootloader) aboot.git: git=MBM-NG-VBE.4F-0-g4e3d3ac
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: retar
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
finished. total time: 0.119s
Code:
>fastboot oem unlock
...
(bootloader) invalid boot state
OKAY [ 0.003s]
finished. total time: 0.004s
Code:
fastboot flashing unlock
...
(bootloader) Check 'Allow OEM Unlock' in Android Settings > Developer
(bootloader) Options.
OKAY [ 0.005s]
finished. total time: 0.006s
I've already tried the following:
1) Flash Stock downloaded from lolinet (firmware/moto/rhannah/official/RETAR/) and from Lenovo Moto Smart Assistant. They fail because flashing is locked.
2) Flashing through Lenovo Moto Smart Assistant. It fails with no comment/log. Probably because of the above.
3) Flashing boot and recovery using TWRP, then try to boot and/or flash stock. No luck.
4) I tried to change the flashing_locked flag using "adb shell setprop ro.oem_unlock_supported 1" and "adb shell setprop ro.oem_unlock_allowed 1". The flags don't get saved after the phone boots again into fastboot.
4) booting stock image using "fastboot boot boot.im" and try to flash stock. It's still not allowed.
As far as I know the potential solutions may be:
a) build a TWRP flashable image using the stock images. I tried doing it using ASSAYYED_KITCHEN but it does not seem to support sparsechung system images. I'm blocked.
b) intentionally hardbrick the phone and blankflash it. I don't know how to harbrick it and I don't have access to the blankflash image.
Any help or guidance may be highly appreciated :fingers-crossed:. Thanks os much in advance!
Bumping! I'd appreciate some help, I'm stuck and without a phone.
simon917 said:
Bumping! I'd appreciate some help, I'm stuck and without a phone.
Click to expand...
Click to collapse
Although there is no section for your device.
You can post in
https://forum.xda-developers.com/moto-e5/help
Your posts will get more relevant views that way.
Sent from my ali using XDA Labs
sd_shadow said:
Although there is no section for your device.
You can post in
https://forum.xda-developers.com/moto-e5/help
Your posts will get more relevant views that way.
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
Thanks!
simon917 said:
Thanks!
Click to expand...
Click to collapse
Unfortunately I don't think there's a solution to your problem.
Looks like the system partitions are messed up.
Lots of similar posts across the Moto devices.
Are you flashing with standard fastboot.exe or mfastboot.exe ?
Sent from my ali using XDA Labs
sd_shadow said:
Unfortunately I don't think there's a solution to your problem.
Looks like the system partitions are messed up.
Lots of similar posts across the Moto devices.
Are you flashing with standard fastboot.exe or mfastboot.exe ?
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
I tried both fastboot and mfastboot. The partition gpt.bin can be reflashed, but the rest of the images cannot:
Code:
C:\Users\Simon\Downloads\mfastboot-v2>mfastboot oem fb_mode_set
...
OKAY [ 0.002s]
finished. total time: 0.003s
C:\Users\Simon\Downloads\mfastboot-v2>mfastboot flash partition gpt.bin
target max-sparse-size: 256MB
sending 'partition' (45 KB)...
OKAY [ 0.005s]
writing 'partition'...
(bootloader) Validating 'gpt.default.xml'
(bootloader) Committing 'gpt.default.xml'
(bootloader) - flashing 'gpt_main0.bin' to 'partition:0'
(bootloader) Flashing primary GPT image...
(bootloader) Flashing backup GPT image...
OKAY [ 0.081s]
finished. total time: 0.088s
C:\Users\Simon\Downloads\mfastboot-v2>mfastboot flash bootloader bootloader.img
target max-sparse-size: 256MB
sending 'bootloader' (7483 KB)...
OKAY [ 0.238s]
writing 'bootloader'...
(bootloader) Validating 'bootloader.default.xml'
(bootloader) Committing 'bootloader.default.xml'
(bootloader) - flashing 'emmc_appsboot.mbn' to 'aboot'
(bootloader) - flashing 'rpm.mbn' to 'rpm'
(bootloader) - flashing 'tz.mbn' to 'tz'
(bootloader) - flashing 'devcfg.mbn' to 'devcfg'
(bootloader) - flashing 'cmnlib.mbn' to 'cmnlib'
(bootloader) - flashing 'cmnlib64.mbn' to 'cmnlib64'
(bootloader) - flashing 'keymaster.mbn' to 'keymaster'
(bootloader) - flashing 'prov.mbn' to 'prov'
(bootloader) - flashing 'sbl1.mbn' to 'sbl1'
OKAY [ 0.898s]
finished. total time: 1.138s
C:\Users\Simon\Downloads\mfastboot-v2>mfastboot flash modem NON-HLOS.bin
target max-sparse-size: 256MB
sending 'modem' (68730 KB)...
OKAY [ 2.165s]
writing 'modem'...
(bootloader) flash permission denied
FAILED (remote failure)
finished. total time: 2.170s
C:\Users\Simon\Downloads\mfastboot-v2>mfastboot flash boot boot.img
target max-sparse-size: 256MB
sending 'boot' (16384 KB)...
OKAY [ 0.517s]
writing 'boot'...
(bootloader) flash permission denied
FAILED (remote failure)
Does this shed any light?
Hello please i have same phone, only acces fastboot and twrp but oem Unlock, please help me bro
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8917-BE.4F
(bootloader) product: hannah
(bootloader) board: hannah
(bootloader) secure: yes
(bootloader) hwrev: P3
(bootloader) radio: 1
(bootloader) storage-type: emmc
(bootloader) emmc: 16GB SAMSUNG QE63MB RV=08 PV=03 FV=0000000000000003
(bootloader) ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=1F
(bootloader) cpu: MSM8917
(bootloader) serialno: ZL5223WDJH
(bootloader) cid: 0x0032
(bootloader) channelid: 0x18
(bootloader) uid: 17E0C47C00000000000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 535822336
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: 351878090871116
(bootloader) meid:
(bootloader) date: 05-20-2018
(bootloader) sku: XT1924-4
(bootloader) carrier_sku: XT1924-4
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Tue Dec 31 19:39:17 UTC 2019"
(bootloader) ro.build.fingerprint[0]: motorola/rhannah/rhannah:8.0.0/OPP
(bootloader) ro.build.fingerprint[1]: S27.91-179-8-9/14:user/release-key
(bootloader) ro.build.fingerprint[2]: s
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.331.14.rhannah.re
(bootloader) ro.build.version.full[1]: tail.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-04400-89xx.0
(bootloader) version-baseband: M8917_34.42.05.98R HANNAH_LATAMDSDS_CUST
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-gb6c3df7 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.8 (GCC)
(bootloader) kernel.version[2]: ) #1 SMP PREEMPT Thu Dec 26 12:21:11 CST
(bootloader) kernel.version[3]: 2019
(bootloader) sbl1.git: git=MBM-NG-VBE.4F-0-g8ffb6ee
(bootloader) rpm.git: git=02a0726-dirty
(bootloader) tz.git: git=9692555-dirty
(bootloader) devcfg.git: git=9692555-dirty
(bootloader) keymaster.git: git=9692555
(bootloader) cmnlib.git: git=9692555
(bootloader) cmnlib64.git: git=9692555
(bootloader) prov.git: git=9692555-dirty
(bootloader) aboot.git: git=MBM-NG-VBE.4F-0-g4e3d3ac
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: tigco
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
pepoxxx said:
Hello please i have same phone, only acces fastboot and twrp but oem Unlock, please help me bro
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8917-BE.4F
(bootloader) product: hannah
(bootloader) board: hannah
(bootloader) secure: yes
(bootloader) hwrev: P3
(bootloader) radio: 1
(bootloader) storage-type: emmc
(bootloader) emmc: 16GB SAMSUNG QE63MB RV=08 PV=03 FV=0000000000000003
(bootloader) ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=1F
(bootloader) cpu: MSM8917
(bootloader) serialno: ZL5223WDJH
(bootloader) cid: 0x0032
(bootloader) channelid: 0x18
(bootloader) uid: 17E0C47C00000000000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 535822336
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: 351878090871116
(bootloader) meid:
(bootloader) date: 05-20-2018
(bootloader) sku: XT1924-4
(bootloader) carrier_sku: XT1924-4
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Tue Dec 31 19:39:17 UTC 2019"
(bootloader) ro.build.fingerprint[0]: motorola/rhannah/rhannah:8.0.0/OPP
(bootloader) ro.build.fingerprint[1]: S27.91-179-8-9/14:user/release-key
(bootloader) ro.build.fingerprint[2]: s
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.331.14.rhannah.re
(bootloader) ro.build.version.full[1]: tail.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-04400-89xx.0
(bootloader) version-baseband: M8917_34.42.05.98R HANNAH_LATAMDSDS_CUST
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-gb6c3df7 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.8 (GCC)
(bootloader) kernel.version[2]: ) #1 SMP PREEMPT Thu Dec 26 12:21:11 CST
(bootloader) kernel.version[3]: 2019
(bootloader) sbl1.git: git=MBM-NG-VBE.4F-0-g8ffb6ee
(bootloader) rpm.git: git=02a0726-dirty
(bootloader) tz.git: git=9692555-dirty
(bootloader) devcfg.git: git=9692555-dirty
(bootloader) keymaster.git: git=9692555
(bootloader) cmnlib.git: git=9692555
(bootloader) cmnlib64.git: git=9692555
(bootloader) prov.git: git=9692555-dirty
(bootloader) aboot.git: git=MBM-NG-VBE.4F-0-g4e3d3ac
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: tigco
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
Click to expand...
Click to collapse
Try LMSA's Flash Rescue
https://forum.xda-developers.com/general/general/update-moto-lenovo-moto-smart-assistant-t3951714
Sent from my Moto E (4) using Tapatalk
It all started when I wanted to root my phone so that I could move more apps to my sd card. I followed this tutorial: https://www.theworldsbestandworst.com/2020/06/root-motorola-moto-e5-play/ but the version of SuperSU they had me install bricked my phone (My phone would freeze on startup at the t-mobile logo).
So, having done so in the past, I knew I could flash the stock firmware and hopefully get my phone back to working condition. I tried using two different downloads of the stock firmware. One from here: https://sourceforge.net/projects/moto-e5-firmware/files/JAMES/XT1921-3/ and one from here: https://forum.xda-developers.com/t/...he-e5-play-xt1921-3-t-mobile-variant.3839675/ (it's the link first given by timjames474). For both downloads I used the batch file method of flashing described here:
because RSDLite wasn't detecting my device. However, both of the times I tried flashing the stock firmware my phone worked normally but was unable to detect my sim card.
Was I using the wrong download of stock firmware? Is my phone broken for good? Please help me.
tezcatlipoca7123 said:
It all started when I wanted to root my phone so that I could move more apps to my sd card. I followed this tutorial: https://www.theworldsbestandworst.com/2020/06/root-motorola-moto-e5-play/ but the version of SuperSU they had me install bricked my phone (My phone would freeze on startup at the t-mobile logo).
So, having done so in the past, I knew I could flash the stock firmware and hopefully get my phone back to working condition. I tried using two different downloads of the stock firmware. One from here: https://sourceforge.net/projects/moto-e5-firmware/files/JAMES/XT1921-3/ and one from here: https://forum.xda-developers.com/t/...he-e5-play-xt1921-3-t-mobile-variant.3839675/ (it's the link first given by timjames474). For both downloads I used the batch file method of flashing described here:
because RSDLite wasn't detecting my device. However, both of the times I tried flashing the stock firmware my phone worked normally but was unable to detect my sim card.
Was I using the wrong download of stock firmware? Is my phone broken for good? Please help me.
Click to expand...
Click to collapse
What does getvar all say?
Code:
fastboot getvar all
[Guide] Using Fastboot.exe with Motorola devices
Guide: Using Fastboot.exe with Motorola Devices If your device has its own section please post in that section. You can ping me with @sd_shadow MediaTek or Qualcomm Chip? Do I have a MediaTek Device? see post #26 Info: If you have a MediaTek...
forum.xda-developers.com
sd_shadow said:
What does getvar all say?
Code:
fastboot getvar all
[Guide] Using Fastboot.exe with Motorola devices
Guide: Using Fastboot.exe with Motorola Devices If your device has its own section please post in that section. You can ping me with @sd_shadow MediaTek or Qualcomm Chip? Do I have a MediaTek Device? see post #26 Info: If you have a MediaTek...
forum.xda-developers.com
Click to expand...
Click to collapse
Here is what my terminal returns when I enter getvar all:
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8920-B9.45
(bootloader) product: james
(bootloader) board: james
(bootloader) secure: yes
(bootloader) hwrev: P3
(bootloader) radio: 1
(bootloader) storage-type: emmc
(bootloader) emmc: 16GB SAMSUNG QE63MB RV=08 PV=03 FV=0000000000000003
(bootloader) ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=1F
(bootloader) cpu: MSM8920
(bootloader) serialno: ZY323SRCZP
(bootloader) cid: 0x0015
(bootloader) channelid: 0x85
(bootloader) uid: 09E5223100000000000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 535822336
(bootloader) reason: Volume down key pressed
(bootloader) imei: 354146092420788
(bootloader) meid:
(bootloader) date: 03-18-2019
(bootloader) sku: XT1921-3
(bootloader) carrier_sku: XT1921-3
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time:
(bootloader) ro.build.fingerprint[0]: motorola/james_t/james:8.0.0/OCP27
(bootloader) ro.build.fingerprint[1]: .91-51-4/4:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.211.4.james_t.t.e
(bootloader) ro.build.version.full[1]: n.US
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-04400-89xx.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-g5480efb-0001
(bootloader) kernel.version[1]: 6-gd2768b6 ([email protected]) (gcc ver
(bootloader) kernel.version[2]: sion 4.8 (GCC) ) #1 SMP PREEMPT Fri Jul
(bootloader) kernel.version[3]: 20 10:36:48 CDT 2018
(bootloader) sbl1.git: git=MBM-NG-VB9.45-0-geb7a3e0
(bootloader) rpm.git: git=02a0726-dirty
(bootloader) tz.git: git=5fefee4-dirty
(bootloader) devcfg.git: git=5fefee4-dirty
(bootloader) keymaster.git: git=5fefee4
(bootloader) cmnlib.git: git=5fefee4
(bootloader) cmnlib64.git: git=5fefee4
(bootloader) prov.git: git=5fefee4-dirty
(bootloader) aboot.git: git=MBM-NG-VB9.45-0-gff56367
(bootloader) frp-state: protected (77)
(bootloader) ro.carrier: tmo
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
Finished. Total time: 0.772s
tezcatlipoca7123 said:
Here is what my terminal returns when I enter getvar all:
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8920-B9.45
(bootloader) product: james
(bootloader) board: james
(bootloader) secure: yes
(bootloader) hwrev: P3
(bootloader) radio: 1
(bootloader) storage-type: emmc
(bootloader) emmc: 16GB SAMSUNG QE63MB RV=08 PV=03 FV=0000000000000003
(bootloader) ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=1F
(bootloader) cpu: MSM8920
(bootloader) serialno: ZY323SRCZP
(bootloader) cid: 0x0015
(bootloader) channelid: 0x85
(bootloader) uid: 09E5223100000000000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 535822336
(bootloader) reason: Volume down key pressed
(bootloader) imei: 354146092420788
(bootloader) meid:
(bootloader) date: 03-18-2019
(bootloader) sku: XT1921-3
(bootloader) carrier_sku: XT1921-3
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time:
(bootloader) ro.build.fingerprint[0]: motorola/james_t/james:8.0.0/OCP27
(bootloader) ro.build.fingerprint[1]: .91-51-4/4:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.211.4.james_t.t.e
(bootloader) ro.build.version.full[1]: n.US
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-04400-89xx.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-g5480efb-0001
(bootloader) kernel.version[1]: 6-gd2768b6 ([email protected]) (gcc ver
(bootloader) kernel.version[2]: sion 4.8 (GCC) ) #1 SMP PREEMPT Fri Jul
(bootloader) kernel.version[3]: 20 10:36:48 CDT 2018
(bootloader) sbl1.git: git=MBM-NG-VB9.45-0-geb7a3e0
(bootloader) rpm.git: git=02a0726-dirty
(bootloader) tz.git: git=5fefee4-dirty
(bootloader) devcfg.git: git=5fefee4-dirty
(bootloader) keymaster.git: git=5fefee4
(bootloader) cmnlib.git: git=5fefee4
(bootloader) cmnlib64.git: git=5fefee4
(bootloader) prov.git: git=5fefee4-dirty
(bootloader) aboot.git: git=MBM-NG-VB9.45-0-gff56367
(bootloader) frp-state: protected (77)
(bootloader) ro.carrier: tmo
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
Finished. Total time: 0.772s
Click to expand...
Click to collapse
The firmware you are using should be correct.
getvar say baseband is missing
Code:
(bootloader) version-baseband: <not found>
and both system slots are INVALID
Not a good sign.
You didn't see any flashing errors?
RSD Lite doesn't work with Windows 10, do you have a Windows 7 machine?
Try posting the service.xml text in https://kfhost.net/flashfile
and compare with your batch file.
sd_shadow said:
The firmware you are using should be correct.
getvar say baseband is missing
Code:
(bootloader) version-baseband: <not found>
and both system slots are INVALID
Not a good sign.
You didn't see any flashing errors?
RSD Lite doesn't work with Windows 10, do you have a Windows 7 machine?
Try posting the service.xml text in https://kfhost.net/flashfile
and compare with your batch file.
Click to expand...
Click to collapse
The batch file I had was slightly different than the one produced by the website you had me use. I replaced the batch file's contents and flashed the firmware again. I got these errors (not sure if 'image signed with key bad key' is an error so I'm including it just incase):
(bootloader) is-logical:FSG: not found
Sending 'FSG' (1696 KB) OKAY [ 0.222s]
Writing 'FSG' (bootloader) Invalid partition name FSG
FAILED (remote: '')
fastboot: error: Command failed
(bootloader) is-logicalSP: not found
Sending 'DSP' (16384 KB) OKAY [ 0.689s]
Writing 'DSP' (bootloader) Invalid partition name DSP
FAILED (remote: '')
fastboot: error: Command failed
(bootloader) is-logical:boot: not found
Sending 'boot' (16384 KB) OKAY [ 0.526s]
Writing 'boot' (bootloader) Image signed with key bad key
OKAY [ 0.553s]
Finished. Total time: 1.279s
(bootloader) is-logical:recovery: not found
Sending 'recovery' (16484 KB) OKAY [ 0.698s]
Writing 'recovery' (bootloader) Image signed with key bad key
OKAY [ 0.584s]
Finished. Total time: 1.316s
I got the same bad key errors when I flashed the firmware with my first batch file. After this flash the phone still works normally besides not being able to read the sim card.
tezcatlipoca7123 said:
The batch file I had was slightly different than the one produced by the website you had me use. I replaced the batch file's contents and flashed the firmware again. I got these errors (not sure if 'image signed with key bad key' is an error so I'm including it just incase):
(bootloader) is-logical:FSG: not found
Sending 'FSG' (1696 KB) OKAY [ 0.222s]
Writing 'FSG' (bootloader) Invalid partition name FSG
FAILED (remote: '')
fastboot: error: Command failed
(bootloader) is-logicalSP: not found
Sending 'DSP' (16384 KB) OKAY [ 0.689s]
Writing 'DSP' (bootloader) Invalid partition name DSP
FAILED (remote: '')
fastboot: error: Command failed
(bootloader) is-logical:boot: not found
Sending 'boot' (16384 KB) OKAY [ 0.526s]
Writing 'boot' (bootloader) Image signed with key bad key
OKAY [ 0.553s]
Finished. Total time: 1.279s
(bootloader) is-logical:recovery: not found
Sending 'recovery' (16484 KB) OKAY [ 0.698s]
Writing 'recovery' (bootloader) Image signed with key bad key
OKAY [ 0.584s]
Finished. Total time: 1.316s
I got the same bad key errors when I flashed the firmware with my first batch file. After this flash the phone still works normally besides not being able to read the sim card.
Click to expand...
Click to collapse
Strange you shouldn't have a recovery.img
Can you attach the service.xml ?
sd_shadow said:
Strange you shouldn't have a recovery.img
Can you attach the service.xml ?
Click to expand...
Click to collapse
I did have twrp on my phone before the flash
Here's the servicefile.xml, the firmware doesn't have a service.xml:
tezcatlipoca7123 said:
I did have twrp on my phone before the flash
Click to expand...
Click to collapse
Devices with a/b system slots don't have a recovery partition it's part of the boot.img now
so now when you install Twrp or magisk the boot partition must be changed.
Here's the servicefile.xml, the firmware doesn't have a service.xml:
Click to expand...
Click to collapse
Yes, my bad
Try just
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
Tried it, each command comes back "OKAY". My phone still can't read the sim card though.
tezcatlipoca7123 said:
Tried it, each command comes back "OKAY". My phone still can't read the sim card though.
Click to expand...
Click to collapse
Windows 10?
sd_shadow said:
Windows 10?
Click to expand...
Click to collapse
Yes, I have have an older machine but I don't know if it still works or what version it is.
tezcatlipoca7123 said:
Yes, I have have an older machine but I don't know if it still works or what version it is.
Click to expand...
Click to collapse
If it's XP or 7 you could try RSD Lite
With the current machine, have you updated adb files?
Tried different USB ports?
sd_shadow said:
If it's XP or 7 you could try RSD Lite
With the current machine, have you updated adb files?
Tried different USB ports?
Click to expand...
Click to collapse
The other pc is also windows 10 .
I'm using the most current platform-tools.
I'll try using other usb ports but my computer doesn't have trouble connecting to my phone so I'm not sure how that'd help (or if your talking about trying to get RSD Lite to work I've already tried other usb ports).
tezcatlipoca7123 said:
The other pc is also windows 10 .
Click to expand...
Click to collapse
The only time RSD Lite has worked for me with Windows 10 is if it originally shipped with 7 and was upgraded to 10.
Man any solutions? I reinstalled firmware, after unlocking bootloader then I flashed twrp and magisk using that twrp but my baseband version is unknown, IMEI unknown.
but my Wi-Fi is working fine, Can someone guide me through with it?
muneebwolf said:
Man any solutions? I reinstalled firmware, after unlocking bootloader then I flashed twrp and magisk using that twrp but my baseband version is unknown, IMEI unknown.
but my Wi-Fi is working fine, Can someone guide me through with it?
Click to expand...
Click to collapse
What does getvar all say?
Code:
fastboot getvar all
sd_shadow said:
What does getvar all say?
Code:
fastboot getvar all
Click to expand...
Click to collapse
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8920-B9.4A
(bootloader) product: james
(bootloader) board: james
(bootloader) secure: yes
(bootloader) hwrev: P3
(bootloader) radio: 1
(bootloader) storage-type: emmc
(bootloader) emmc: 16GB SAMSUNG QE63MB RV=08 PV=03 FV=0000000000000003
(bootloader) ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=1F
(bootloader) cpu: MSM8920
(bootloader) serialno: ZY323JV88W
(bootloader) cid: 0x0015
(bootloader) channelid: 0x85
(bootloader) uid: B94B05DB00000000000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 535822336
(bootloader) reason: Volume down key pressed
(bootloader) imei: 354146091881899
(bootloader) meid:
(bootloader) date: 12-17-2018
(bootloader) sku: XT1921-3
(bootloader) carrier_sku: XT1921-3
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Thu Jan 1 9:35:18 UTC 1970"
(bootloader) ro.build.fingerprint[0]: motorola/james_t/james:8.0.0/OCPS2
(bootloader) ro.build.fingerprint[1]: 7.91-150-5-1-3/4:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.311.4.james_t.t.e
(bootloader) ro.build.version.full[1]: n.US
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-04400-89xx.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-gf60ba68 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.8 (GCC)
(bootloader) kernel.version[2]: ) #1 SMP PREEMPT Tue May 7 15:58:26 CDT
(bootloader) kernel.version[3]: 2019
(bootloader) sbl1.git: git=MBM-NG-VB9.4A-0-g8ffb6ee
(bootloader) rpm.git: git=02a0726-dirty
(bootloader) tz.git: git=7a51f9f-dirty
(bootloader) devcfg.git: git=7a51f9f-dirty
(bootloader) keymaster.git: git=7a51f9f
(bootloader) cmnlib.git: git=7a51f9f
(bootloader) cmnlib64.git: git=7a51f9f
(bootloader) prov.git: git=7a51f9f-dirty
(bootloader) aboot.git: git=MBM-NG-VB9.4A-0-g4e376e8
(bootloader) frp-state: no protection (77)
(bootloader) ro.carrier: tmo
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
muneebwolf said:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8920-B9.4A
(bootloader) product: james
(bootloader) board: james
(bootloader) secure: yes
(bootloader) hwrev: P3
(bootloader) radio: 1
(bootloader) storage-type: emmc
(bootloader) emmc: 16GB SAMSUNG QE63MB RV=08 PV=03 FV=0000000000000003
(bootloader) ram: 2GB SAMSUNG LP3 DIE=8Gb M5=01 M6=06 M7=00 M8=1F
(bootloader) cpu: MSM8920
(bootloader) serialno: ZY323JV88W
(bootloader) cid: 0x0015
(bootloader) channelid: 0x85
(bootloader) uid: B94B05DB00000000000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 535822336
(bootloader) reason: Volume down key pressed
(bootloader) imei: 354146091881899
(bootloader) meid:
(bootloader) date: 12-17-2018
(bootloader) sku: XT1921-3
(bootloader) carrier_sku: XT1921-3
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Thu Jan 1 9:35:18 UTC 1970"
(bootloader) ro.build.fingerprint[0]: motorola/james_t/james:8.0.0/OCPS2
(bootloader) ro.build.fingerprint[1]: 7.91-150-5-1-3/4:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.311.4.james_t.t.e
(bootloader) ro.build.version.full[1]: n.US
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-04400-89xx.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-gf60ba68 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.8 (GCC)
(bootloader) kernel.version[2]: ) #1 SMP PREEMPT Tue May 7 15:58:26 CDT
(bootloader) kernel.version[3]: 2019
(bootloader) sbl1.git: git=MBM-NG-VB9.4A-0-g8ffb6ee
(bootloader) rpm.git: git=02a0726-dirty
(bootloader) tz.git: git=7a51f9f-dirty
(bootloader) devcfg.git: git=7a51f9f-dirty
(bootloader) keymaster.git: git=7a51f9f
(bootloader) cmnlib.git: git=7a51f9f
(bootloader) cmnlib64.git: git=7a51f9f
(bootloader) prov.git: git=7a51f9f-dirty
(bootloader) aboot.git: git=MBM-NG-VB9.4A-0-g4e376e8
(bootloader) frp-state: no protection (77)
(bootloader) ro.carrier: tmo
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
Click to expand...
Click to collapse
Looks like you have this version
XT1921-3_JAMES_TMO_8.0.0_OCPS27.91-150-5-1-3_cid21_subsidy-MPCS_RSU_regulatory-DEFAULT_CFC.xml.zip
this is the newest version
XT1921-3_JAMES_TMO_8.0.0_OCPS27.91-150-14-13_cid21_subsidy-TMO_RSU_regulatory-DEFAULT_CFC.xml.zip
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com
but that shouldn't have anything do with your problem, unless you have been flashing a different version than 27.91-150-5-1-3
The invalid slots are worrisome, often with this problem, a blankflash is needed to fix it.
Are you using flashfile.xml to get the correct flash commands?
sd_shadow said:
Looks like you have this version
XT1921-3_JAMES_TMO_8.0.0_OCPS27.91-150-5-1-3_cid21_subsidy-MPCS_RSU_regulatory-DEFAULT_CFC.xml.zip
this is the newest version
XT1921-3_JAMES_TMO_8.0.0_OCPS27.91-150-14-13_cid21_subsidy-TMO_RSU_regulatory-DEFAULT_CFC.xml.zip
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com
but that shouldn't have anything do with your problem, unless you have been flashing a different version than 27.91-150-5-1-3
The invalid slots are worrisome, often with this problem, a blankflash is needed to fix it.
Are you using flashfile.xml to get the correct flash commands?
Click to expand...
Click to collapse
Man I used downloaded this firmware from lolinet, used all the necessary commands but still its not working, and yes I used flashfile.xml
I relocked the bootloader using "fastboot oem lock" and I've lost the OS. When I use LMSA and try the rescue option it fails in the Flashing section before it can load the OS image file. It fails every time during Flashings before reaching 50%. Any suggestions?
dary1361 said:
I relocked the bootloader using "fastboot oem lock" and I've lost the OS. When I use LMSA and try the rescue option it fails in the Flashing section before it can load the OS image file. It fails every time during Flashings before reaching 50%. Any suggestions?
Click to expand...
Click to collapse
Try unlock code again
sd_shadow said:
Try unlock code again
Click to expand...
Click to collapse
Below I have copied what I get when I try the unlock code.
I cant change OEM unlock setting since the OS wont boot. When I start the device I get "No valid operating system could be found. The device will not boot."
PS D:\platform-tools> .\fastboot oem unlock "UNIQUE_KEY"
(bootloader) Check 'OEM unlocking' in Android Settings > Developer
(bootloader) Options
FAILED (remote: '')
fastboot: error: Command failed
dary1361 said:
Below I have copied what I get when I try the unlock code.
I cant change OEM unlock setting since the OS wont boot. When I start the device I get "No valid operating system could be found. The device will not boot."
PS D:\platform-tools> .\fastboot oem unlock "UNIQUE_KEY"
(bootloader) Check 'OEM unlocking' in Android Settings > Developer
(bootloader) Options
FAILED (remote: '')
fastboot: error: Command failed
Click to expand...
Click to collapse
Try flashing stock manually with fastboot
[Guide] Using Fastboot.exe with Motorola devices
Guide: Using Fastboot.exe with Motorola Devices If your device has its own section please post in that section. You can ping me with @sd_shadow MediaTek or Qualcomm Chip? Do I have a MediaTek Device? see post #26 Info: If you have a MediaTek...
forum.xda-developers.com
sd_shadow said:
Try flashing stock manually with fastboot
[Guide] Using Fastboot.exe with Motorola devices
Guide: Using Fastboot.exe with Motorola Devices If your device has its own section please post in that section. You can ping me with @sd_shadow MediaTek or Qualcomm Chip? Do I have a MediaTek Device? see post #26 Info: If you have a MediaTek...
forum.xda-developers.com
Click to expand...
Click to collapse
I followed the video and created the "servicefile.bat" file. But when I run it, I get the below message. All the flash commands fail. Is it a bootloader locked issue? But the fastboot unlock command doesn't work and the OS does not load, for me to unlock.
D:\RSD_Lite_v6.2.4\GUAMNA_RETAIL_QZAS30.Q4_39_35_4_subsidy_DEFAULT_regulatory_DEFAULT_CFC.xml>echo off
max-sparse-size: 268435456
Finished. Total time: 0.004s
OKAY [ 0.002s]
Finished. Total time: 0.003s
Sending 'partition' (37 KB) OKAY [ 0.003s]
Writing 'partition' (bootloader) Validating 'gpt.default.xml'
(bootloader) flash permission denied
(bootloader) Cancelling 'gpt.default.xml'
FAILED (remote: '')
.
.
.
dary1361 said:
I followed the video and created the "servicefile.bat" file. But when I run it, I get the below message. All the flash commands fail. Is it a bootloader locked issue? But the fastboot unlock command doesn't work and the OS does not load, for me to unlock.
D:\RSD_Lite_v6.2.4\GUAMNA_RETAIL_QZAS30.Q4_39_35_4_subsidy_DEFAULT_regulatory_DEFAULT_CFC.xml>echo off
max-sparse-size: 268435456
Finished. Total time: 0.004s
OKAY [ 0.002s]
Finished. Total time: 0.003s
Sending 'partition' (37 KB) OKAY [ 0.003s]
Writing 'partition' (bootloader) Validating 'gpt.default.xml'
(bootloader) flash permission denied
(bootloader) Cancelling 'gpt.default.xml'
FAILED (remote: '')
.
.
.
Click to expand...
Click to collapse
What does getvar all say? (remove imei before posting)
Code:
fastboot getvar all
Here is the result.
PS D:\platform-tools> .\fastboot getvar all
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-guamna_retail-bfe8cf6b47-210204
(bootloader) product: guamna
(bootloader) board: guamna
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: GWLC
(bootloader) storage-type: eMMC
(bootloader) emmc: 32GB SKHYNIX hB8aP> RV=08 PV=03 FV=0000000034303030
(bootloader) ufs: N/A
(bootloader) ram: 3GB SKHYNIX LP4x DIE=12Gb M5-M8=06 05 00 0D
(bootloader) cpu: SM_KAMORTA 1.0
(bootloader) serialno: **********
(bootloader) cid: ******
(bootloader) channelid: 0x8d
(bootloader) uid: ***********
(bootloader) securestate: flashing_locked
(bootloader) factory-modes: disabled
(bootloader) verity-state: enforcing (0)
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 798722048
(bootloader) reason: Volume down key pressed
(bootloader) imei: ***************
(bootloader) imei2:
(bootloader) meid:
(bootloader) date: 12-17-2020
(bootloader) sku: XT2093-4
(bootloader) carrier_sku: XT2093-4
(bootloader) battid: SB18C77591
(bootloader) battery-voltage: 4054
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) poweroffalarm: 0
(bootloader) ro.carrier: retus
(bootloader) ro.build.fingerprint[0]: motorola/guamna_retail/guamna:10/Q
(bootloader) ro.build.fingerprint[1]: ZAS30.Q4-39-35-2/87822e:user/relea
(bootloader) ro.build.fingerprint[2]: se-keys
(bootloader) ro.build.version.qcom: LA.UM.8.15.r1-06600-KAMORTA.0
(bootloader) version-baseband: HA10_18.534.02.52R GUAMNA_GWLC_CUST
(bootloader) kernel.version[0]: Linux version 4.19.95-perf+ ([email protected]
(bootloader) kernel.version[1]: oid-build) (clang version 8.0.16 for And
(bootloader) kernel.version[2]: roid NDK) #1 SMP PREEMPT Thu Feb 4 01:17
(bootloader) kernel.version[3]: :32 CST 2021
(bootloader) git:xbl: MBM-3.0-guamna_retail-9304f2ad5-210204
(bootloader) git:xbl_config: MBM-3.0-guamna_retail-9304f2ad5-210204
(bootloader) git:abl: MBM-3.0-guamna_retail-bfe8cf6b47-210204
(bootloader) git:rpm: MBM-3.0-guamna_retail-6b0a297-210204
(bootloader) git:tz: MBM-3.0-guamna_retail-9de24c4c-210204
(bootloader) git:hyp: MBM-3.0-guamna_retail-9de24c4c-210204
(bootloader) git:devcfg: MBM-3.0-guamna_retail-9de24c4c-210204
(bootloader) git:keymaster: MBM-3.0-guamna_retail-3b8c7a4-210204
(bootloader) git:storsec: MBM-3.0-guamna_retail-3b8c7a4-210204
(bootloader) git:uefisecapp: MBM-3.0-guamna_retail-3b8c7a4-210204
(bootloader) gitrov: MBM-3.0-guamna_retail-9de24c4c-210204
(bootloader) git:qupfw: MBM-3.0-guamna_retail-f07d142-210204
(bootloader) frp-state: protected (77)
(bootloader) current-slot: a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 0
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: yes
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: yes
(bootloader) slot-retry-count:_a: 6
(bootloader) slot-retry-count:_b: 0
(bootloader) logical-block-size: 0x200
(bootloader) erase-block-size: 0x200
(bootloader) is-userspace: no
(bootloader) pcb-part-no: ***********
(bootloader) primary-display: hlt_hx83102d_video_display
(bootloader) secondary-display:
all: listed above
Finished. Total time: 0.216s
dary1361 said:
Here is the result.
PS D:\platform-tools> .\fastboot getvar all
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-guamna_retail-bfe8cf6b47-210204
(bootloader) product: guamna
(bootloader) board: guamna
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: GWLC
(bootloader) storage-type: eMMC
(bootloader) emmc: 32GB SKHYNIX hB8aP> RV=08 PV=03 FV=0000000034303030
(bootloader) ufs: N/A
(bootloader) ram: 3GB SKHYNIX LP4x DIE=12Gb M5-M8=06 05 00 0D
(bootloader) cpu: SM_KAMORTA 1.0
(bootloader) serialno: **********
(bootloader) cid: ******
(bootloader) channelid: 0x8d
(bootloader) uid: ***********
(bootloader) securestate: flashing_locked
(bootloader) factory-modes: disabled
(bootloader) verity-state: enforcing (0)
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 798722048
(bootloader) reason: Volume down key pressed
(bootloader) imei: ***************
(bootloader) imei2:
(bootloader) meid:
(bootloader) date: 12-17-2020
(bootloader) sku: XT2093-4
(bootloader) carrier_sku: XT2093-4
(bootloader) battid: SB18C77591
(bootloader) battery-voltage: 4054
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) poweroffalarm: 0
(bootloader) ro.carrier: retus
(bootloader) ro.build.fingerprint[0]: motorola/guamna_retail/guamna:10/Q
(bootloader) ro.build.fingerprint[1]: ZAS30.Q4-39-35-2/87822e:user/relea
(bootloader) ro.build.fingerprint[2]: se-keys
(bootloader) ro.build.version.qcom: LA.UM.8.15.r1-06600-KAMORTA.0
(bootloader) version-baseband: HA10_18.534.02.52R GUAMNA_GWLC_CUST
(bootloader) kernel.version[0]: Linux version 4.19.95-perf+ ([email protected]
(bootloader) kernel.version[1]: oid-build) (clang version 8.0.16 for And
(bootloader) kernel.version[2]: roid NDK) #1 SMP PREEMPT Thu Feb 4 01:17
(bootloader) kernel.version[3]: :32 CST 2021
(bootloader) git:xbl: MBM-3.0-guamna_retail-9304f2ad5-210204
(bootloader) git:xbl_config: MBM-3.0-guamna_retail-9304f2ad5-210204
(bootloader) git:abl: MBM-3.0-guamna_retail-bfe8cf6b47-210204
(bootloader) git:rpm: MBM-3.0-guamna_retail-6b0a297-210204
(bootloader) git:tz: MBM-3.0-guamna_retail-9de24c4c-210204
(bootloader) git:hyp: MBM-3.0-guamna_retail-9de24c4c-210204
(bootloader) git:devcfg: MBM-3.0-guamna_retail-9de24c4c-210204
(bootloader) git:keymaster: MBM-3.0-guamna_retail-3b8c7a4-210204
(bootloader) git:storsec: MBM-3.0-guamna_retail-3b8c7a4-210204
(bootloader) git:uefisecapp: MBM-3.0-guamna_retail-3b8c7a4-210204
(bootloader) gitrov: MBM-3.0-guamna_retail-9de24c4c-210204
(bootloader) git:qupfw: MBM-3.0-guamna_retail-f07d142-210204
(bootloader) frp-state: protected (77)
(bootloader) current-slot: a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 0
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: yes
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: yes
(bootloader) slot-retry-count:_a: 6
(bootloader) slot-retry-count:_b: 0
(bootloader) logical-block-size: 0x200
(bootloader) erase-block-size: 0x200
(bootloader) is-userspace: no
(bootloader) pcb-part-no: ***********
(bootloader) primary-display: hlt_hx83102d_video_display
(bootloader) secondary-display:
all: listed above
Finished. Total time: 0.216s
Click to expand...
Click to collapse
You are using this firmware?
https://mirrors.lolinet.com/firmware/moto/guamna/official/RETUS/
XT2093-4_GUAMNA_RETUS_10_QZAS30.Q4-39-35-2_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
I had used the ROM which LMSA recognizes and downloads, which is
GUAMNA_RETAIL_QZAS30.Q4_39_35_4_subsidy_DEFAULT_regulatory_DEFAULT_CFC.xml
I also tried with the one displayed after "getvar all" and which you suggested.
XT2093-4_GUAMNA_RETUS_10_QZAS30.Q4-39-35-2_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
I get the same result.
C:\XT2093-4_GUAMNA_RETUS_10_QZAS30.Q4-39-35-2_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml>echo off
max-sparse-size: 268435456
Finished. Total time: 0.001s
OKAY [ 0.002s]
Finished. Total time: 0.004s
Sending 'partition' (37 KB) OKAY [ 0.003s]
Writing 'partition' (bootloader) Validating 'gpt.default.xml'
(bootloader) flash permission denied
(bootloader) Cancelling 'gpt.default.xml'
FAILED (remote: '')
fastboot: error: Command failed
Sending 'bootloader' (13824 KB) OKAY [ 0.359s]
Writing 'bootloader' (bootloader) Validating 'bootloader.default.xml'
(bootloader) flash permission denied
.
.
.
dary1361 said:
I had used the ROM which LMSA recognizes and downloads, which is
GUAMNA_RETAIL_QZAS30.Q4_39_35_4_subsidy_DEFAULT_regulatory_DEFAULT_CFC.xml
I also tried with the one displayed after "getvar all" and which you suggested.
XT2093-4_GUAMNA_RETUS_10_QZAS30.Q4-39-35-2_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
I get the same result.
C:\XT2093-4_GUAMNA_RETUS_10_QZAS30.Q4-39-35-2_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml>echo off
max-sparse-size: 268435456
Finished. Total time: 0.001s
OKAY [ 0.002s]
Finished. Total time: 0.004s
Sending 'partition' (37 KB) OKAY [ 0.003s]
Writing 'partition' (bootloader) Validating 'gpt.default.xml'
(bootloader) flash permission denied
(bootloader) Cancelling 'gpt.default.xml'
FAILED (remote: '')
fastboot: error: Command failed
Sending 'bootloader' (13824 KB) OKAY [ 0.359s]
Writing 'bootloader' (bootloader) Validating 'bootloader.default.xml'
(bootloader) flash permission denied
.
.
.
Click to expand...
Click to collapse
Are just using the .bat ?
Try manually entering commands
Code:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
sd_shadow said:
Are just using the .bat ?
Try manually entering commands
Code:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
Click to expand...
Click to collapse
same
fastboot flash partition gpt.bin
Sending 'partition' (37 KB) OKAY [ 0.003s]
Writing 'partition' (bootloader) Validating 'gpt.default.xml'
(bootloader) flash permission denied
(bootloader) Cancelling 'gpt.default.xml'
FAILED (remote: '')
fastboot: error: Command failed
Repeated the manual flash process using a mac system too. Used sudo.
Still getting
sudo ./fastboot flash partition gpt.bin
Password:
Sending 'partition' (37 KB) OKAY [ 0.002s]
Writing 'partition' (bootloader) Validating 'gpt.default.xml'
(bootloader) flash permission denied
(bootloader) Cancelling 'gpt.default.xml'
FAILED (remote: '')
fastboot: error: Command failed
Did I brick the phone? I just re-locked the bootloader!
Ok I'm having the same issue please tell me you figured it out.
wonderlandpoet said:
Ok I'm having the same issue please tell me you figured it out.
Click to expand...
Click to collapse
What does getvar all say? (remove imei before posting)
Code:
fastboot getvar all
sd_shadow said:
What does getvar all say? (remove imei before posting)
Code:
fastboot getvar all
Click to expand...
Click to collapse
sd_shadow said:
What does getvar all say? (remove imei before posting)
Code:
fastboot getvar all
Click to expand...
Click to collapse
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-borneo_retail-bfe8cf6b47-210331
(bootloader) product: borneo
(bootloader) board: borneo
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: NA
(bootloader) storage-type: eMMC
(bootloader) emmc: 64GB MICRON S0J9K8 RV=08 PV=10 FV=0000000000000004
(bootloader) ufs: N/A
(bootloader) ram: 4GB MICRON LP4x DIE=16Gb M5-M8=FF 04 10 10
(bootloader) cpu: SM_KAMORTA_H 1.0
(bootloader) serialno: ZY22BNZWRJ
(bootloader) cid: 0x0032
(bootloader) channelid: 0x97
(bootloader) uid: 753B7C40
(bootloader) securestate: flashing_locked
(bootloader) factory-modes: disabled
(bootloader) verity-state: enforcing (3)
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 804474880
(bootloader) reason: UTAG bootmode configured as fastboot
(bootloader) imei:
(bootloader) imei2:
(bootloader) meid:
(bootloader) date: 01-19-2021
(bootloader) sku: XT2117-4
(bootloader) carrier_sku: XT2117-4
(bootloader) battid: SB18C77591
(bootloader) battery-voltage: 4080
(bootloader) iccid: 8901260971168257655
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) poweroffalarm: 0
(bootloader) ro.carrier: fi
(bootloader) ro.build.fingerprint[0]: motorola/borneo_retail/borneo:10/Q
(bootloader) ro.build.fingerprint[1]: ZBS30.Q4-43-35-2/f8e93:user/releas
(bootloader) ro.build.fingerprint[2]: e-keys
(bootloader) ro.build.version.qcom: LA.UM.8.15.r1-06600-KAMORTA.0
(bootloader) version-baseband: HA10_18.534.02.57p BORNEO_NA_CUST
(bootloader) kernel.version[0]: Linux version 4.19.95-perf+ ([email protected]
(bootloader) kernel.version[1]: oid-build) (clang version 8.0.16 for And
(bootloader) kernel.version[2]: roid NDK) #1 SMP PREEMPT Wed Mar 31 10:1
(bootloader) kernel.version[3]: 4:31 CDT 2021
(bootloader) git:xbl: MBM-3.0-borneo_retail-9304f2ad5-210331
(bootloader) git:xbl_config: MBM-3.0-borneo_retail-9304f2ad5-210331
(bootloader) git:abl: MBM-3.0-borneo_retail-bfe8cf6b47-210331
(bootloader) git:rpm: MBM-3.0-borneo_retail-6b0a297-210331
(bootloader) git:tz: MBM-3.0-borneo_retail-9de24c4c-210331
(bootloader) git:hyp: MBM-3.0-borneo_retail-9de24c4c-210331
(bootloader) git:devcfg: MBM-3.0-borneo_retail-9de24c4c-210331
(bootloader) git:keymaster: MBM-3.0-borneo_retail-3b8c7a4-210331
(bootloader) git:storsec: MBM-3.0-borneo_retail-3b8c7a4-210331
(bootloader) git:uefisecapp: MBM-3.0-borneo_retail-3b8c7a4-210331
(bootloader) gitrov: MBM-3.0-borneo_retail-9de24c4c-210331
(bootloader) git:qupfw: MBM-3.0-borneo_retail-f07d142-210331
(bootloader) frp-state: protected (475)
(bootloader) current-slot: a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 0
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: no
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 1
(bootloader) slot-retry-count:_b: 7
(bootloader) logical-block-size: 0x200
(bootloader) erase-block-size: 0x200
(bootloader) is-userspace: no
(bootloader) pcb-part-no: SB28C86870
(bootloader) primary-display: tm_ili9881x_video_display
(bootloader) secondary-display:
all: listed above
Finished. Total time: 0.156s
wonderlandpoet said:
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-borneo_retail-bfe8cf6b47-210331
(bootloader) product: borneo
(bootloader) board: borneo
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: NA
(bootloader) storage-type: eMMC
(bootloader) emmc: 64GB MICRON S0J9K8 RV=08 PV=10 FV=0000000000000004
(bootloader) ufs: N/A
(bootloader) ram: 4GB MICRON LP4x DIE=16Gb M5-M8=FF 04 10 10
(bootloader) cpu: SM_KAMORTA_H 1.0
(bootloader) serialno: ZY22BNZWRJ
(bootloader) cid: 0x0032
(bootloader) channelid: 0x97
(bootloader) uid: 753B7C40
(bootloader) securestate: flashing_locked
(bootloader) factory-modes: disabled
(bootloader) verity-state: enforcing (3)
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 804474880
(bootloader) reason: UTAG bootmode configured as fastboot
(bootloader) imei:
(bootloader) imei2:
(bootloader) meid:
(bootloader) date: 01-19-2021
(bootloader) sku: XT2117-4
(bootloader) carrier_sku: XT2117-4
(bootloader) battid: SB18C77591
(bootloader) battery-voltage: 4080
(bootloader) iccid: 8901260971168257655
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) poweroffalarm: 0
(bootloader) ro.carrier: fi
(bootloader) ro.build.fingerprint[0]: motorola/borneo_retail/borneo:10/Q
(bootloader) ro.build.fingerprint[1]: ZBS30.Q4-43-35-2/f8e93:user/releas
(bootloader) ro.build.fingerprint[2]: e-keys
(bootloader) ro.build.version.qcom: LA.UM.8.15.r1-06600-KAMORTA.0
(bootloader) version-baseband: HA10_18.534.02.57p BORNEO_NA_CUST
(bootloader) kernel.version[0]: Linux version 4.19.95-perf+ ([email protected]
(bootloader) kernel.version[1]: oid-build) (clang version 8.0.16 for And
(bootloader) kernel.version[2]: roid NDK) #1 SMP PREEMPT Wed Mar 31 10:1
(bootloader) kernel.version[3]: 4:31 CDT 2021
(bootloader) git:xbl: MBM-3.0-borneo_retail-9304f2ad5-210331
(bootloader) git:xbl_config: MBM-3.0-borneo_retail-9304f2ad5-210331
(bootloader) git:abl: MBM-3.0-borneo_retail-bfe8cf6b47-210331
(bootloader) git:rpm: MBM-3.0-borneo_retail-6b0a297-210331
(bootloader) git:tz: MBM-3.0-borneo_retail-9de24c4c-210331
(bootloader) git:hyp: MBM-3.0-borneo_retail-9de24c4c-210331
(bootloader) git:devcfg: MBM-3.0-borneo_retail-9de24c4c-210331
(bootloader) git:keymaster: MBM-3.0-borneo_retail-3b8c7a4-210331
(bootloader) git:storsec: MBM-3.0-borneo_retail-3b8c7a4-210331
(bootloader) git:uefisecapp: MBM-3.0-borneo_retail-3b8c7a4-210331
(bootloader) gitrov: MBM-3.0-borneo_retail-9de24c4c-210331
(bootloader) git:qupfw: MBM-3.0-borneo_retail-f07d142-210331
(bootloader) frp-state: protected (475)
(bootloader) current-slot: a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 0
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: no
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 1
(bootloader) slot-retry-count:_b: 7
(bootloader) logical-block-size: 0x200
(bootloader) erase-block-size: 0x200
(bootloader) is-userspace: no
(bootloader) pcb-part-no: SB28C86870
(bootloader) primary-display: tm_ili9881x_video_display
(bootloader) secondary-display:
all: listed above
Finished. Total time: 0.156s
Click to expand...
Click to collapse
Have you tried LMSA'S rescue option?
Rescue and Smart Assistant (LMSA)(Motorola/Lenovo Only)
Rescue and Smart Assistant LMSA: Lenovo's Motorola Smart Assistant (PC) For Lenovo and Motorola Devices Only Rescue and Smart Assistant (LMSA) is an official tool installs on PC. Can help to manage smart device (include all Lenovo android phone...
forum.xda-developers.com
sd_shadow said:
Have you tried LMSA'S rescue option?
Rescue and Smart Assistant (LMSA)(Motorola/Lenovo Only)
Rescue and Smart Assistant LMSA: Lenovo's Motorola Smart Assistant (PC) For Lenovo and Motorola Devices Only Rescue and Smart Assistant (LMSA) is an official tool installs on PC. Can help to manage smart device (include all Lenovo android phone...
forum.xda-developers.com
Click to expand...
Click to collapse
Yes and I will start the download and it will sit at 0% for hours I click on settings then it says program not responding
Huh, why did the os disappear after relocking the bootloader..
What did you perform before relocking the bootloader?
ChazzMatt said:
You have to boot to the bootloader screen manually, using the volume + power button trick.
Once on the bootloader screen, when you plug you phone into a PC with ADB installed, it should recognize it.
Then, flash the full stock firmware, from the link above. It's Brazil Marshmallow firmware with December 2016 Security Update. I don't know of any newer right now. You have Brazil XT1225, so that Brazil firmware is compatible with your phone.
But with locked bootloader you have to flash exact same version or newer made for your phone, and you have to enter the commands correctly or you may brick your phone. (When I flashed from Puerto Rico Kitkat to India Lollipop, I messed up. But since my bootloader was unlocked, I just reflashed again, when I realized my mistake.)
If you are not sure of the steps, google Motorola firmware ADB. Here's a couple of excellent tutorials:
How to Manually Official Firmware on any Motorola Device
https://forum.xda-developers.com/dr...force-how-to-manually-flash-official-t3282077
I use this one above. IGNORE where it says you need an unlocked bootloader, because he's talking about cross-region flashing which you are NOT doing. You are flashing your own region firmware.
This one below is by rootjunky and he while he also discusses RSDLite, later in the article he says ADB/fastboot are best as RSDLite can stall.
Motorola Firmware Restore Plus Unbrick
http://www.rootjunky.com/motorola-firmware-restore/
If you get your phone running again, I suggest you unlock the bootloader. There are ways to hide an unlocked bootloader (like Magisk), if that's why you locked it back... But an unlocked bootloader + root makes it YOUR phone and much easier to recover from disasters.
Click to expand...
Click to collapse
This technique is for Motorola devices so it may work, I'm not sure I've ever owned one of those devices.
Get back to me if it works..