Samsung Galaxy Tab 3 lite (T110) Stuck in CWM recovery boot loop - Android Q&A, Help & Troubleshooting

My Galaxy Tab went into a CWM boot loop yesterday after I did a factory reset from Settings to fix some google play issues.
Steps tried so far
1) Doing a factory reset from CWM recovery.
2) Clearing cache/ Dalvik cache
3) Flashing stock rom again after clearing existing data
None of the above worked. My tab keeps going into recovery mode.
I decided to see if I could flash something via ODIN, but ODIN is not recognizing my device for some reason, after I connect it via Download mode.
Edit: Odin works now. Can someone help me with a bootloader tar/md5 for T110 that I can flash via ODIN? Ty!
Help? Ideas? I have spent more than a couple hours searching all possible forums, and at my wits end now.

Do you still need help? My tab 3 lite had a softbrick and i was able to fix it so let me know if i can help you with anything.

Related

[Q] Software Unbrick HELP PLEASE!

Hi All,
OK, so I've soft bricked my S3, or so I hope.
It was fine when I took it off charge this morning, but at work I noticed that my pocket was getting oddly hot..
Took my phone out my pocket and the phone was stuck on the boot screen (the first one).
Went into recovery and tried a cache wipe, dalvik wipe, still the same, then tried a wipe data/factory reset, and the system kept rebooting before it finished the wipe!
Then I tried flashing the OMEGA ROM I had on my SD card and the aroma installer would start, but as soon as it tried to do any sort of wipe at the start, the phone rebooted again!!
So after this I decided to download the latest stock firmware from samsung-updates.com and flash via odin. The firmware flashed OK but then the phone would not start again, still stuck at the boot logo.
I then tried to flash the CWM recovery again from the samsung galaxys3 toolkit folder on my C: drive. When trying to flash this, it kept getting stuck at "NAND Write Start!!" and would not go any further. Now whatever I try and flash via ODIN it gets stuck at NAND Write Start!!
I also have tried flashing the latest .pit along with and separely to the ROM with the "Re-Partition" button checked in ODIN and it just fails every time.
Is there anything I can do? Or if I have to send it to the service centre, is there a way to reset the binary counter from download mode? :/ Mine is saying 7 counts.
anyone?

[Q] Samsung Galaxy Tab 10.1 HELP!!!

I need help urgently. I have the samsung galaxy tab 10.1 and i was in Team Win Recover Project (TWRP) when i was trying to restore my tablet to a different rom. When in TWRP i went to wipe and wiped data, dalvik cache, system, then factory reset. Now I tried to mount my device to put a different rom on and install and everything but my computer notices it under device and printers so i cant transfer the rom to it. Also when i tried to reboot it said E: System is not installed - preventing reboot! I would very much appreciate help and I do not want to lose my tab so pls help.
download stock tar.md5. download odin. and put tab in odin mode. and flash stock tar.

[Q] no boot after Samsung update

Hey guys its been since my first epic 1 that I been here..what I have is an unrooted s3 I updated it and it worked fine but the next day it wont boot past the big s....I was wondering if anyway to undo the update? I dont want to wipe and flash because all my pics and music and some important files that mever made it to my sd card..any help or idea?
Boot to recovery and clear cache and dalvic, probably won't help though.
Next step is always to factory reset, you might get around this by installing custom recovery (Philz recovery is recommended), use that to format system, data etc. before installing your previous stock rom via .zip. That way your internal sd files will still be there and the phone will boot.
Follow guides in general, stickies.
Ok but it wont let me in recovery mode.I can get into the odin but thats it.can I dl cwm to it from the comp in odin mode? Or do I have to root it from there and see what it does?
from the odin mode flash stock rom as per your region. Also please note you will loose your data.

[Q] GALAXY ACE 5830i stuck in BOOTLOOP Tried everything PLEASE HELP!

I have samsung galaxy ace 5830i
yesterday i restarted it but i got stuck on bootloop where it repeats the samsung logo
my phone was rooted and i did increase the internal memory using link2sd and stuff.
i tried everything from factory reset to reflashing the stock rom but the boot loops is not fix.
i tried to connect it with kies to flash the original firmware but even in the download mode the kies won't recognize my device.
i even tried flashing other custom roms and then doing factory reset wiping cache files dalvik files etc but nothing is working for me
Help will really be appreciated
The same happened to me i advice you to unbrick using ODIN
Jahaifu said:
I have samsung galaxy ace 5830i
yesterday i restarted it but i got stuck on bootloop where it repeats the samsung logo
my phone was rooted and i did increase the internal memory using link2sd and stuff.
i tried everything from factory reset to reflashing the stock rom but the boot loops is not fix.
i tried to connect it with kies to flash the original firmware but even in the download mode the kies won't recognize my device.
i even tried flashing other custom roms and then doing factory reset wiping cache files dalvik files etc but nothing is working for me
Help will really be appreciated
Click to expand...
Click to collapse
if you have custom rom or stock rom coocked the kies cant help you.
do these solutions in order :
>>>solution 1 : in recovery do facotry reset and install rom , wip cache and dalvick. the first boot take time. so wait. if not worck try to format system before flashing rom.
>>>solution 2 : factory reset in recovery then install stock firemware by odin after flash is complete enter to recovery and do factory reset again. the first boot take time. so wait.
>>>solution 3 (danger, do it only if you give up if you dont have any other solution) : flash stock firmeware with odin but cheek nand erase all in odin, after flash is complete enter to recovery and do factory reset(compulsory).the first boot take time. so wait.
use latest odin version.
good luck.

i9300 samsung logo loop after each flashing

Hi everybody, I have a serious problem with flashing my i9300. I tried flash stock rom 4.1.2 by several methods (Kies, Odin 3.07) but nothing worked. Each flashing procedure runs corectly, but after reboot occurs samsung logo loop unless I remove the batery. I can get into download mode or recowery mode, I tried wipe reset, wipe cache, wipe dalvik cache but nothing is worked. Thx for response guys.
Try 4.3 stock rom. I flashed via Odin and factory reset via recovery mode, and it works!
Thx It works.
Get the stock ROM from:
http://samsung-updates.com/device/?id=GT-I9300
Yes...it's work.
Thank you very much.

Categories

Resources