Hi,
I had flashing the SLD gaming CusRom, but I mistaken to installing the rom from micromax not the ported rom from this http://forum.xda-developers.com/len...rom-ported-sld-ultimate-gaming-p780-t276a9434 and all my life gone be wrong, my heart was sick because i can't entering the system 'n always bootloop whenever I install many rom, i can'
t mount my internal storage 'n data. :crying:
Urttee said:
Hi,
I had flashing the SLD gaming CusRom, but I mistaken to installing the rom from micromax not the ported rom from this http://forum.xda-developers.com/len...rom-ported-sld-ultimate-gaming-p780-t276a9434 and all my life gone be wrong, my heart was sick because i can't entering the system 'n always bootloop whenever I install many rom, i can'
t mount my internal storage 'n data. :crying:
Click to expand...
Click to collapse
Hi. I hope you have backup, because you must reflash base firmware.
stympy said:
Hi. I hope you have backup, because you must reflash base firmware.
Click to expand...
Click to collapse
where I can find the file? backup, for what?
Urttee said:
where I can find the file? backup, for what?
Click to expand...
Click to collapse
Backup of your system. You cannot find the file if you don allready have backup. For restoryng your settings ans system and... all.
stympy said:
Backup of your system. You cannot find the file if you don allready have backup. For restoryng your settings ans system and... all.
Click to expand...
Click to collapse
Can I flash via recov? I'm confused flashing via sp tools, is sp tools really need i-net connection? I alway fail to download with my mini speed.
Urttee said:
Can I flash via recov? I'm confused flashing via sp tools, is sp tools really need i-net connection? I alway fail to download with my mini speed.
Click to expand...
Click to collapse
If you can acces recovery, custom recovery like TWRP or CWM not stock, you can flash back your firmware. All you need is your last firmware and an sd-card.
Iff you have stock recovery this is bad.
Sent from my Lenovo P780
stympy said:
If you can acces recovery, custom recovery like TWRP or CWM not stock, you can flash back your firmware. All you need is your last firmware and an sd-card.
Iff you have stock recovery this is bad.
Sent from my Lenovo P780
Click to expand...
Click to collapse
I have TWRP 2.7 by Javum, but i can't flash the stock rom with it, is stock rom n stock firmware different?
stympy said:
If you can acces recovery, custom recovery like TWRP or CWM not stock, you can flash back your firmware. All you need is your last firmware and an sd-card.
Iff you have stock recovery this is bad.
Sent from my Lenovo P780
Click to expand...
Click to collapse
I try flash with SP FT, put the scatter file, check DA DL, check the preload with this path, but nothing happen, no progress bar appears (yellow,purple n red).
Urttee said:
I try flash with SP FT, put the scatter file, check DA DL, check the preload with this path, but nothing happen, no progress bar appears (yellow,purple n red).
Click to expand...
Click to collapse
You dont have the drivers installed or installed correctly.
Sent from my Lenovo P780
stympy said:
You dont have the drivers installed or installed correctly.
Sent from my Lenovo P780
Click to expand...
Click to collapse
where I can found the correct drivers? I try flahsing anothe device with SPFT, the purple bar appears when I click the firmware > upgrade, then I try combining button on my device, the red bar appear but before reach the green circle I unplug my device. And now my device dead, pressing the power button but no respond, I was charging the phone full of night yesterday before. Any solution
Urttee said:
where I can found the correct drivers? I try flahsing anothe device with SPFT, the purple bar appears when I click the firmware > upgrade, then I try combining button on my device, the red bar appear but before reach the green circle I unplug my device. And now my device dead, pressing the power button but no respond, I was charging the phone full of night yesterday before. Any solution
Click to expand...
Click to collapse
Here is the link: http://forum.xda-developers.com/lenovo-p780/help/rooting-tutorial-kitkat-t2835605/page12.
At the bottom of the page.
LenovoUsbDriver_autorun_1.0.10.zip
MTK_USB_ Driver GOOOOODDD.rar
stympy said:
Here is the link: http://forum.xda-developers.com/lenovo-p780/help/rooting-tutorial-kitkat-t2835605/page12.
At the bottom of the page.
LenovoUsbDriver_autorun_1.0.10.zip
MTK_USB_ Driver GOOOOODDD.rar
Click to expand...
Click to collapse
Hi stympy, I think the main problem is my usb driver, it can detecting, not showing the mtk 6.5.x.x , any idea?
Urttee said:
Hi stympy, I think the main problem is my usb driver, it can detecting, not showing the mtk 6.5.x.x , any idea?
Click to expand...
Click to collapse
'What windows do you use ?
Related
Hello kind sir,:highfive:
My phone is the xperia sola i rooted it alright,but i wanted to play MC3 on it and apparently i had to modify the system.prop,the game worked fine ,Later on i installed Chainfire,I installed its driver but the phone was STUCK on the boot screen(Sony),I was able to access the CWM i wiped EVERYTHING data,system... But yet NOTHING THE PHONE WAS still stuck on the sony screen...Any help here?...Since i have modified the system.prop i cannot reinstall my rom,I will need a modified Rom's system.prop to match with mine,I changed the system.props value to those of Galaxy nexus S,the other settings remained untouched I dont know WHAT TO DO,any help will be Very VERY VERY welcome
I modified the .prop accordingly to these instructions: I CANT POST THE LINK :/
You wiped system, which means you erased your whole ROM AND you wiped data which means you erased the rest. You need to reflash to stock with flashtool and your data is now lost and can't be recovered.
K900 said:
You wiped system, which means you erased your whole ROM AND you wiped data which means you erased the rest. You need to reflash to stock with flashtool and your data is now lost and can't be recovered.
Click to expand...
Click to collapse
Yes i am aware of that fact..Flashtool will work for me since i have a custom system.prop?
Meateater21 said:
Yes i am aware of that fact..Flashtool will work for me since i have a custom system.prop?
Click to expand...
Click to collapse
You don't have a custom system.prop. You have a completely empty /system.
K900 said:
You don't have a custom system.prop. You have a completely empty /system.
Click to expand...
Click to collapse
Im glad i have a nice person to help me out with these Thank you
PS:downloading flashtool right now(im owrried a bit on how am i going to do this)
Can't you just enter recovery and flash rom again?
Sent from my Kang Phone
RomWiz said:
Can't you just enter recovery and flash rom again?
Sent from my Kang Phone
Click to expand...
Click to collapse
Well no,I tryed that and it says Installation aborted... :/ to the rom ...Soooo no
K900 said:
You don't have a custom system.prop. You have a completely empty /system.
Click to expand...
Click to collapse
Alright bro,
Downloaded flashtool now what? :s
Meateater21 said:
Alright bro,
Downloaded flashtool now what? :s
Click to expand...
Click to collapse
Download a stock firmware and flash it!!
Use the thank button, it's there for a reason
Sent from my LT26i using xda premium
Download this
http://forum.xda-developers.com/showthread.php?t=1810108
then copy ftf to flashtool/firmwares
load flash tool and click on the tap with the black lightning and select flashmode n press ok
select the ftf file and tick no final verification then click ok
turn off your phone and hold volume down key and plug in usb cable
then let flash tool instal
humza123 said:
Download this
http://forum.xda-developers.com/showthread.php?t=1810108
then copy ftf to flashtool/firmwares
load flash tool and click on the tap with the black lightning and select flashmode n press ok
select the ftf file and tick no final verification then click ok
turn off your phone and hold volume down key and plug in usb cable
then let flash tool instal
Click to expand...
Click to collapse
Hmph i fixed with my own way,i edited a rom to mach with mine and the install was succcesful,even though when i install another rom the installation aborts but oh well,Everything is cool now thanks for your help:laugh:
Hi, all.
I have upload to my phone FXP 227 from the UNRESTRICT.LI/FXP. When i wipe cache and reboot phone it's install some of the programs (may be 84 i count) and then stuck on Android update... The OS not start. So i want to go back to 226 but when i don't have a OS how to do it? I use CWM v6.0.2.8 but can't mount the storage whit USB... I have install a driver for USB from Sony site the driver is recognize, but can't load any drives..
Any help is useful!
Infinity_bg said:
Hi, all.
I have upload to my phone FXP 227 from the UNRESTRICT.LI/FXP. When i wipe cache and reboot phone it's install some of the programs (may be 84 i count) and then stuck on Android update... The OS not start. So i want to go back to 226 but when i don't have a OS how to do it? I use CWM v6.0.2.8 but can't mount the storage whit USB... I have install a driver for USB from Sony site the driver is recognize, but can't load any drives..
Any help is useful!
Click to expand...
Click to collapse
Did you wipe personal data and wiped dalvik cache also mate?
DaRk-L0rD said:
Did you wipe personal data and wiped dalvik cache also mate?
Click to expand...
Click to collapse
Affirmative. I do it several times... no luck at all.
Infinity_bg said:
Affirmative. I do it several times... no luck at all.
Click to expand...
Click to collapse
The only solution mate is the one that IAmNice told you. Flash stock rom and then try installing again cm.
IAmNice said:
Can you go into flashmode? If you can use flashtool to flash a stock ROM and then flash fxp 226..
Sent from my LT22i using xda app-developers app
Click to expand...
Click to collapse
No i don't tray that already... i forgot hot to use that tool hahaha, all the time updates goes smooth so i don't use it for long time. Is there any new version of that tool and way to do it safely? And were is the web page that can download the last versions, drivers and etc.
Infinity_bg said:
No i don't tray that already... i forgot hot to use that tool hahaha, all the time updates goes smooth so i don't use it for long time. Is there any new version of that tool and way to do it safely? And were is the web page that can download the last versions, drivers and etc.
Click to expand...
Click to collapse
Drivers are already included for most of xperia devices.
Here you can download the latest version: http://androxyde.github.io/
There is also a tutorial on youtube on how to use flashtool.
Thanks all now i am searching for stock ROM... any for Europe.
PS: I manage to repair but whit CWM. Just have a backup for CM 9.
And i tray Flash tool but when i have CWM installed how to enter in flash boot. I have remember that there is something like UP and Down button that is for sound volume change but this not works.
Infinity_bg said:
Thanks all now i am searching for stock ROM... any for Europe.
PS: I manage to repair but whit CWM. Just have a backup for CM 9.
And i tray Flash tool but when i have CWM installed how to enter in flash boot. I have remember that there is something like UP and Down button that is for sound volume change but this not works.
Click to expand...
Click to collapse
You cam access fastboot mode this way:
turn off the phone
Plug usb cable on pc
Press volume up key while plugging usb on your phone. You will see that the led bar becomes blue.
Done
I was flashing Custom ROM on my "Qmobile Noir A900" and ended up corrupting both ROM and recovery.
And my device is now stuck at a boot loop. Recovery mode is just a white screen and can't seem to go into bootloader mode either.
My Question is.. Is my device totally hard bricked or there's still some hope left?
I am new here and not sure if this is the right section. Sorry
Still no reply?
anAbbasi said:
Still no reply?
Click to expand...
Click to collapse
you can flash stock rom ,i think sold problem
download at http://www.needrom. com/mobile/purexperia-final-rom-for-elife-e3q-mobile-noir-a900/
tunglethanh90 said:
you can flash stock rom ,i think sold problem
Click to expand...
Click to collapse
How do I flash the stock ROM without having access to Recovery Mod and Bootloader MOD?
anAbbasi said:
How do I flash the stock ROM without having access to Recovery Mod and Bootloader MOD?
Click to expand...
Click to collapse
This MTK Chipset ,MTK MT6859
to flash stock rom witch MTK chip set you need
SP_Flash_Tool_5.1343.01.zip
MTK usb driver
Stock firmware
How to flash stock rom
Press and hold volume + ,device install driver port mtk driver
SP_Flash_Tool select scatterMTK...txt from stock firmware and star
Sorry i don't have device to test
tunglethanh90 said:
This MTK Chipset ,MTK MT6859
to flash stock rom witch MTK chip set you need
SP_Flash_Tool_5.1343.01.zip
MTK usb driver
Stock firmware
How to flash stock rom
Press and hold volume + ,device install driver port mtk driver
SP_Flash_Tool select scatterMTK...txt from stock firmware and star
Sorry i don't have device to test
Click to expand...
Click to collapse
Thanks a bunch mate. I did a little research on SP Flash Tool and MTK Chipsets.
I have Formatted whole device using Flash Tool. Now I am going to flash GM Discovery Stock ROM.
Will let you know how it goes.
tunglethanh90 said:
This MTK Chipset ,MTK MT6859
to flash stock rom witch MTK chip set you need
SP_Flash_Tool_5.1343.01.zip
MTK usb driver
Stock firmware
How to flash stock rom
Press and hold volume + ,device install driver port mtk driver
SP_Flash_Tool select scatterMTK...txt from stock firmware and star
Sorry i don't have device to test
Click to expand...
Click to collapse
Well that didn't workout so well. I am unable to FLASH new ROM. I keep getting
BROM ERROR: S_FT_ENABLE_FAIL (4032)
[EMI] Enable DRAM Failed!
Can you suggest any solution for this?
I think I will now try Blu Life Play ROM.
anAbbasi said:
Well that didn't workout so well. I am unable to FLASH new ROM. I keep getting
BROM ERROR: S_FT_ENABLE_FAIL (4032)
[EMI] Enable DRAM Failed!
Can you suggest any solution for this?
I think I will now try Blu Life Play ROM.
Click to expand...
Click to collapse
Rom wrong or please use SP_Flash_Tool_5.1343.01 and select firmware upgrage
tunglethanh90 said:
Rom wrong or please use SP_Flash_Tool_5.1343.01 and select firmware upgrage
Click to expand...
Click to collapse
No luck.
Tried SPFT 5.1352.01.
Used Firmware Upgrade.
still same error.
Used the ROM from this link this time.
http://forum.xda-developers.com/showpost.php?p=43772181&postcount=2
Maybe it's because I formatted whole flash?
anAbbasi said:
No luck.
Tried SPFT 5.1352.01.
Used Firmware Upgrade.
still same error.
Used the ROM from this link this time.
http://forum.xda-developers.com/showpost.php?p=43772181&postcount=2
Maybe it's because I formatted whole flash?
Click to expand...
Click to collapse
Try with here
Select firmware upgrade
Post result
tunglethanh90 said:
Try with here
Select firmware upgrade
Post result
Click to expand...
Click to collapse
Used SP Flash Tool 5.1343.01 this time. (The one you provided)
Same error as before.
I have attached screenshots of the procedure.
Snap1: Files I am flashing.
Snap2: when I connect my device.
Snap3: the error I receive.
And Also, If I use the scatter file for without Preloader, Flash tool crashes after red bar fills.
anAbbasi said:
Used SP Flash Tool 5.1343.01 this time. (The one you provided)
Same error as before.
I have attached screenshots of the procedure.
Snap1: Files I am flashing.
Snap2: when I connect my device.
Snap3: the error I receive.
And Also, If I use the scatter file for without Preloader, Flash tool crashes after red bar fills.
Click to expand...
Click to collapse
Try Flash file http://www.mediafire.com/download/d8ccqumthn9fvbb/A900_140428_103304.rar
tunglethanh90 said:
Try Flash file http://www.mediafire.com/download/d8ccqumthn9fvbb/A900_140428_103304.rar
Click to expand...
Click to collapse
Downloading now. What's different about this file.
P.S. I also tried flashing GIONEE ELIFE E3 stock rom. Same error.
anAbbasi said:
Downloading now. What's different about this file.
P.S. I also tried flashing GIONEE ELIFE E3 stock rom. Same error.
Click to expand...
Click to collapse
you download and flash firmware ,post result
tunglethanh90 said:
you download and flash firmware ,post result
Click to expand...
Click to collapse
Did that...
Device is back on... all thanks to you...
I am now facing two new issues.
1. SIM cards are not being recognized.
2. Secondly, Internal Storage is not accessible.
File Explorer only shows sdcard and Upon connecting to PC, only sdcard is visible. However, I can see internal storage listed in Settings > Storage.
anAbbasi said:
Did that...
Device is back on... all thanks to you...
I am now facing two new issues.
1. SIM cards are not being recognized.
2. Secondly, Internal Storage is not accessible.
File Explorer only shows sdcard and Upon connecting to PC, only sdcard is visible. However, I can see internal storage listed in Settings > Storage.
Click to expand...
Click to collapse
Try Hard reset
tunglethanh90 said:
you download and flash firmware ,post result
Click to expand...
Click to collapse
Solved these issues too.
First did a cache wipe and factory reset. It solved the storage problem but gave me invalid IMEI notification.
Then did a backup restore from default recovery. (I had made a backup prior to all this )
Solved everything.
Thanks a lot man. You saved the day!
anAbbasi said:
Solved these issues too.
First did a cache wipe and factory reset. It solved the storage problem but gave me invalid IMEI notification.
Then did a backup restore from default recovery. (I had made a backup prior to all this )
Solved everything.
Thanks a lot man. You saved the day!
Click to expand...
Click to collapse
Ok , Thks
By the way, where did you get that Backup from?
tunglethanh90 said:
Try Flash file http://www.mediafire.com/download/d8ccqumthn9fvbb/A900_140428_103304.rar
Click to expand...
Click to collapse
Hey,
Though this thread is old and dead now, but i must thank tunglethanh90 for providing the stock Rom (spflash version) of A900. I was having problem with my A900 and found stock rom on needrom site, flashed it and my cell went in to bootloop. I didn't have SPFlash or MTK backup only CWM backup which was no good. I used this ROM provided by tunglethanh90 and i was successful in making my set alive again. Afterwards, i got the problem of invalid IMEI. For that i installed CWM recovery and restored my cwm stock rom backup that i took and saved ealier. All good now but making my set alive again is due to tunglethanh90. Thank You Sir .... So heads up for any guy having QMobile A900 Rom issue, this is what u need to download, dont dl from needrom as its no go.
Regards.
Hope you enjoy.
Kitt for flash with Flashing Tool S228.
Kitt for flash with Flashing Tool S226.
Little tutorial:
- Unpack FlashTools and your ROM, and Click on Flash_tool.exe
- Select the MT6589_Android_scatter.txt in ROM
- Wait file to be added into Flash Tool
- choose Option->USB Model,click USB Model
–> Choose Option->DA DownLoad All->Speed->High Speed, click High Speed (THIS STEP IS FOR FLASH TOOL V3, SKIP IF YOU FLASH WITH FLASH TOOL V5)
- choose DA DL All With Check Sum (THIS STEP IS FOR FLASH TOOL V3, SKIP IF YOU FLASH WITH FLASH TOOL V5)
- "upgrade ROM Firmware->Upgrade "
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow, if no, then have to install the driver
- And green circles display
- Finish !
- You can now safely disconnect your phone and turn it on.
SP FLASH TOOL LINK: https://drive.google.com/folderview?id=0B_B98oK4DpK1S1l2bXRkTGxhVFk&usp=sharing
Here are 2 screenshots maybe this will help!
Good Luck.
Amazing work...Thanks
How to enter in default recovery in kitkat.. ?
stympy said:
Hope you enjoy.
Link: https://drive.google.com/folderview?id=0B_B98oK4DpK1OUlUNkpRUDF6bkU&usp=sharing
Click to expand...
Click to collapse
Hi dude,
Thanks for sharing, I have flash the 8GB version and face the IMEI Invalid problem, trying below method also can't fix :
1.) Try to flash third party recovery for ROOT & Change the IMEI, the SP Tool Process Stuck...(Refer Photo Attachment)
2.) Try to flash other version of ROM, the SP Tool Process Stuck...(Refer Photo Attachment)
Now my phone can switch on and use, only no network...
P/S : Even can't boot into Meta Mode...
Anybody have a solution for rooting this ROM version true PC software ?
Thanks In Advance !
bennyyen said:
Hi dude,
Thanks for sharing, I have flash the 8GB version and face the IMEI Invalid problem, trying below method also can't fix :
1.) Try to flash third party recovery for ROOT & Change the IMEI, the SP Tool Process Stuck...(Refer Photo Attachment)
2.) Try to flash other version of ROM, the SP Tool Process Stuck...(Refer Photo Attachment)
Now my phone can switch on and use, only no network...
P/S : Even can't boot into Meta Mode...
Anybody have a solution for rooting this ROM version true PC software ?
Thanks In Advance !
Click to expand...
Click to collapse
Try to use for flash the alternative scatter files for your 8GB phone from my tutorial: http://forum.xda-developers.com/lenovo-p780/help/rooting-tutorial-kitkat-t2835605
Or this tutorial: http://forum.xda-developers.com/len...oot-install-twrp-custom-recovery-kit-t2849538
stympy said:
Try to use for flash the alternative scatter files for your 8GB phone from my tutorial: http://forum.xda-developers.com/lenovo-p780/help/rooting-tutorial-kitkat-t2835605
Or this tutorial: http://forum.xda-developers.com/len...oot-install-twrp-custom-recovery-kit-t2849538
Click to expand...
Click to collapse
Dear Dude,
I have try out the above 2 way, also same stuck at process and the geno root software also can't root.
Finally I managed to flash the TWRP Recovery by change to SP Tool Version 3.1320.0.163.
Thanks for help !:good:
Cheers...:laugh:
Did anyone try this ROM? Is it OK? IMEI Invalid problem?
congminh1709 said:
Did anyone try this ROM? Is it OK? IMEI Invalid problem?
Click to expand...
Click to collapse
I have tried both 4 GB firmware S226 and S228. Both are good.
As for 8 GB i do not know. I do not own an 8GB phone.
Sent from my Lenovo P780
stympy said:
I have tried both 4 GB firmware S226 and S228. Both are good.
As for 8 GB i do not know. I do not own an 8GB phone.
Sent from my Lenovo P780
Click to expand...
Click to collapse
I have a 8GB phone. I just downloaded the ROW228.
I have a doubt...Do I have to flash S226, S227 and then only S228 or can I straight flash S228?
Pls clarify. I will flash it and get back!
Thanks!
PS: I am right now on S220_140722
archiplanner said:
I have a 8GB phone. I just downloaded the ROW228.
I have a doubt...Do I have to flash S226, S227 and then only S228 or can I straight flash S228?
Pls clarify. I will flash it and get back!
Thanks!
PS: I am right now on S220_140722
Click to expand...
Click to collapse
You can flash directly S228.
I put that updates there for those who have flashed S226 allready and do not have a very good internet connection. For flashing offline !
Finally on S228
stympy said:
I have tried both 4 GB firmware S226 and S228. Both are good.
As for 8 GB i do not know. I do not own an 8GB phone.
Sent from my Lenovo P780
Click to expand...
Click to collapse
stympy said:
You can flash directly S228.
I put that updates there for those who have flashed S226 allready and do not have a very good internet connection. For flashing offline !
Click to expand...
Click to collapse
Dear Stympy,
I tried flashing both the versions (S226 and S228) given in your post. However, neither worked. It always failed in the recovery. Then I tried to flash an OTA S220 which worked (as per my last post). Later there were three official updates shown up in my phone, S226, S227 and S228 (of course, one by one). I just updated them and now I am on S228.
Thanks a lot for all the help!
I will bother you if we get a 5.0 for P780 (8GB).
Till then, :good:
How to enter factory Recovery
Hold both both volume buttons and then hold power button for about 5-10 seconds then volume button up have fun its all in Chinese
Try flashing row s123. Its work for me.
Phone Memory locked
Dear Stympy,
My latest ROM S228 is working well.
However, I am facing a problem in accessing my phone memory. I am attaching snapshot of my storage. When I connect it to laptop, it just shows a Lenovo_Suite which installs a program to share my mobiles capabilities on laptop. My phone memory is not visible from laptop.
What is this emulated folder about? It seems to be a copy of my SD card..but not full. Where is this folder located? Is it eating from my phone memory? Can I delete it?
Please advice!
Thanks!
screen shot attached
sorry...missed the image. PFA
archiplanner said:
Dear Stympy,
My latest ROM S228 is working well.
However, I am facing a problem in accessing my phone memory. I am attaching snapshot of my storage. When I connect it to laptop, it just shows a Lenovo_Suite which installs a program to share my mobiles capabilities on laptop. My phone memory is not visible from laptop.
What is this emulated folder about? It seems to be a copy of my SD card..but not full. Where is this folder located? Is it eating from my phone memory? Can I delete it?
Please advice!
Thanks!
Click to expand...
Click to collapse
Hi. Yes you cannot acces the internal memory on the row firmware. I did notice this problem, but was no problem for me because i have sd card. I recomend that you buy one minimum 16 gb class 10.
Do not erase the emulated folder. Seems that system uses that folder.
Sent from my SMT TAB 704DC
Hi,
I tried installing the S228 4 GB version with SPFT v5 and got this message a few seconds after the red bar appeared: "Unrecognized ROM detected." My phone's ROM: P780_S136_140306
Any suggestions what I need to do? Thanks in advance
cheers, sk1rge
Edit: My ROM is a rooted ROW, It's the one the phone was shipped with from cect-shop.
sk1rge said:
Hi,
I tried installing the S228 4 GB version with SPFT v5 and got this message a few seconds after the red bar appeared: "Unrecognized ROM detected." My phone's ROM: P780_S136_140306
Any suggestions what I need to do? Thanks in advance
cheers, sk1rge
Edit: My ROM is a rooted ROW, It's the one the phone was shipped with from cect-shop.
Click to expand...
Click to collapse
Replace the preloader from S228 with the new one and it will work. Tested...
Sent from my Lenovo P780
stympy said:
Replace the preloader from S228 with the new one and it will work. Tested...
Sent from my Lenovo P780
Click to expand...
Click to collapse
Right, the new preloader... Please forgive my ignorance, but where do I find that new preloader?
Thanks, sk1rge
sk1rge said:
Right, the new preloader... Please forgive my ignorance, but where do I find that new preloader?
Thanks, sk1rge
Click to expand...
Click to collapse
Here is the new preoloader for the phones made after 03.2014!
stympy said:
Here is the new preoloader for the phones made after 03.2014!
Click to expand...
Click to collapse
Thanks! I put the preloader.bin from your link into the S228 directory and removed the "preloader_pradai_row.bin". I still get the message "Unrecognized ROM detected". I guess I have some screwed up ROM, the only ROM I could ever write over it was some older MIUI version (didn't try that many different ROM's though). If you want to have a closer look at my ROM, I can pm you a dl link - it probably would be a waste of time though.
Edit: my phone was made before 03.2014, I am quite certain.
Edit2: Not so certain anymore, because of that ROM date..
I have TWRP in my A310. Flashed http://forum.xda-developers.com/a310/development/resurrection-remix-lp-5-5-t3160496 this rom, dunno which version TWRP I have, so now phone is not starting up.
Any help will be appreciated, Guys I don't want to take my phone to Service center ppl. They are horrible.
Phone is turning on, trying to boot - failing - restarting - trying to enter recovery as a TWRP logo shows up then screen flickers and nothing happens and this keeps going on. TWRP also tries to open MTP but that fails too.
Dosen't stay in Bootloader - fastboot as well, restarts.
Are you able to go to recovery?
Do you have a backup of previous rom? If you have it, try flashing stock rom using ygdp tool and after that restore the backup.
Thanks for quick reply
shaijuvjohn said:
Are you able to go to recovery?
Do you have a backup of previous rom? If you have it, try flashing stock rom using ygdp tool and after that restore the backup.
Click to expand...
Click to collapse
No, I am not able to go to recovery.
A quick question to those who have used YGDP, Does it work while is switched off ?
headlessNick said:
No, I am not able to go to recovery.
A quick question to those who have used YGDP, Does it work while is switched off ?
Click to expand...
Click to collapse
Do you have the backup of previous rom?
If you are going to flash stock rom, gydp tool will detect the phone even without battery too.
shaijuvjohn said:
Do you have the backup of previous rom?
If you are going to flash stock rom, gydp tool will detect the phone even without battery too.
Click to expand...
Click to collapse
Let me check that when I get back home and let you know, I must have backups If GYDY worked, then we shall party :angel::cyclops::highfive:
Can someone point to a GYDP guide, I found one but the download links don't work :cyclops:
headlessNick said:
Let me check that when I get back home and let you know, I must have backups If GYDY worked, then we shall party :angel::cyclops::highfive:
Click to expand...
Click to collapse
Try YGDP and flash stock and then restore the backup if available.
When you flash the stock rom it will repalce the twrp also. We can easily install twrp through ygdp. Follow the steps.
1. Select your .cpb file and apply
2. YGDP will unzip the cpb file, path may be C:\YLXZGJ\YGDP\DownFiles\8297W (in my system this is the path, please check after unzipping)
3. Check the unzipped folder contents
4. There will be a file named recovery.img
5. Delete the recovery.img file
6. Copy your twrp recovery to the unzipped folder and rename it to recovery.img
7. Click on start button
8. Remove battery from your phone and connect it to the usb
9. It will detect your phone and start flashing
10. Wait for flashing finishes to 100 %
11. Done. Disconnect phone. You flashed stock rom with twrp recovery
12. Copy the backup to memory card and insert it in phone
12. Insert battery and press power button and volume up key, go to twrp recovery, restore your backup and enjoy
---------- Post added at 12:00 PM ---------- Previous post was at 11:56 AM ----------
headlessNick said:
Can someone point to a GYDP guide, I found one but the download links don't work :cyclops:
Click to expand...
Click to collapse
http://www.needrom.com/wp-content/uploads/2014/10/YGDP_Setup_V3.83_Assembly.zip
Try this one, i am using this one on A311.
You need to have these drivers installed in your system - DA USB VCOM Port, PreLoader USB VCOM (Android)
If you have drivers not installed use the below one from the attachment. :victory:
Thanks - Tying...
headlessNick said:
Thanks - Tying...
Click to expand...
Click to collapse
Thanks a lot guys especially
shaijuvjohn said:
shaijuvjohn
Click to expand...
Click to collapse
, I should have probably read all the instructions, It was all there. Had some difficulties in installing the drivers as COM port But at the end :victory: works like charm.
I will definitely spread this knowledge with who ever needs in future.
Proud owner of stocked rooted custom recovery MMX Nitro A310 and OnePlus One
headlessNick said:
Thanks a lot guys especially , I should have probably read all the instructions, It was all there. Had some difficulties in installing the drivers as COM port But at the end :victory: works like charm.
I will definitely spread this knowledge with who ever needs in future.
Proud owner of stocked rooted custom recovery MMX Nitro A310 and OnePlus One
Click to expand...
Click to collapse
Yup because i already went through all these situations and i know the difficulties. That is why i gave you each steps. Always Happy to HELP. :victory:
didnt worked
shaijuvjohn said:
Are you able to go to recovery?
Do you have a backup of previous rom? If you have it, try flashing stock rom using ygdp tool and after that restore the backup.
Click to expand...
Click to collapse
I hv tried to installed from ygdp stock rom but it stopped in between. The process wont complete, plz help me if u can
Micromax q391
My Micromax canvas q391 not working its just stuck on the Micromax logo n I'm not even able to access the recovery mode n does not have the backup of rom
What can I do to start it up please help
Even I tried to Flash with YGDP but no use. My mobile is not stable suddenly and automatically it disconnects from my system even connected with USB Cable.
..
WHen I open the link a page comes up saying " Needrom do not authorizing, the links referred by another website for download the ROMs.
The link must obligatory be clicked from of Needrom.com
"
What should I do....
same problrm faced
headlessNick said:
I have TWRP in my A310. Flashed http://forum.xda-developers.com/a310/development/resurrection-remix-lp-5-5-t3160496 this rom, dunno which version TWRP I have, so now phone is not starting up.
Any help will be appreciated, Guys I don't want to take my phone to Service center ppl. They are horrible.
Phone is turning on, trying to boot - failing - restarting - trying to enter recovery as a TWRP logo shows up then screen flickers and nothing happens and this keeps going on. TWRP also tries to open MTP but that fails too.
Dosen't stay in Bootloader - fastboot as well, restarts.
Click to expand...
Click to collapse
i had faced same problem ..
but stay calm .. just download ypdp flash tool .. download stock rom and flash it using ypdp tool ... remember while flashing remove the battery otherwise it will not detect the phone , as my was not detected .. but as soon i removed the battery , it flashed the rom in couple of minutes . and after flashing remember to flash a custom rom as the stock rom gets corrupted causing these issues .. installed darkeness redefined rom and it is woking extremely fast , best rom in my opinion . choise is upon you ,
Hope my message helped you , for any more questions do ask.
boot loop
i have the same problem boot loop but im not able to flash becoz my micromax canvas nitro a311 disconnecting continuously on lap im not able to open recovery mode also help:fingers-crossed: