Hi, Yesterday I flashed EMUI 3 onto my phone over CM12.1. I cleaned the dalvic cache and I also installed GAPPS. When the ROM loaded up, it said that the data in the data partition could not be used and asked me to wipe the Data Partition. I accepted because I had backed up all the information. It starts and about 30 seconds in the phone just switches off, but without any warning, No shutting down message or power off, nothing just on and then blank. So I turned my phone on and it just boots straight into recovery. I have restored from a backup, flashed my previous ROM. Re-Flashed the Rom I had, Wiped the Dalvic Cache, The cahce, the data partition and still no luck
Does anyone know what I can do??
Also another thing, When I turn my phone on, It says Honor (Its a Huawei ASCEND phone...) After flashing EMUI it said honor instead of Ascend, So I think its overwritten my bootloader. BTW, I was able to boot into my phone using said bootloader before, it was only after i selected to wipe and it blanked the boot loop started.
Found a Solution!!!
Fixed I installed PhilzTouch for the G620S, wiped all user data (cleaned for new rom) and re-installed CyanogenMod 12.1.
Thank you Philz!!!!!
Related
I rooted my device a few days ago in order to stop the 4.1 ota update, I am currently on 4.0.4 and the device is an xt912.
Today I decided to install safestrap and after installing the recovery and booting into it, I backed up the stock rom.
After backing it up, I clicked on reboot to system.
The device then jumped into a bootloop.
So I cleared cache, dalvik cache, and even factory reset but it won't pass the DROID eye.
So I created a new slot and restored my early backup and to my suprise, it booted up.
I then rebooted back to recovery and cleared system, data,cache and dalvik cache of stock slot and restored the same back up there and rebooted, and it booted up nicely. But after that the recovery kind of disappeared. So I installed safestrap apk again and rebooted to recovery to make sure it flashed.
I was able to boot into the recovery but as I tried to boot back into the rom, I got stuck in a boot loop again.
My problem is if I reinstall the recovery, the device gets stuck in a bootloop, unless I wipe everything and restore my backup.
Also when turn off the phone and connect it to wall charger, the battery sign doesn't show up again.
Can u guys help me out??
Doesn't matter if I loose my stuff.
I just want a working 4.0.4 with root and to be able to charge the device when it's off.
(BTW my version of safestrap is 3.3.0 I think. Its 3 point something.)
I need help ASAP.
Sent from my DROID RAZR using XDA Free mobile app
Hi.
I have a slight problem with my device. Yesterday, after installing new update via updater my device cant boot the system. It stays on black screen with "MI" then "Powered by android" appears and nothing happens (waited couple of hours, but still nothing). I've tried to wipe cache, dalvik cache and factory reset via recovery - still nothing.
My device was flashed to have TWRP and then supersu - haven't used any other modifications.
Can anyone please help?
Cheers
Same here, TWRP backup also seems gone and cant manually install the update ROM nor the previous stable one.
My problem is solved.
I've flashed miui v.6.7.5 via miFlash and then installed new release through recovery and it works just fine.
Hi!
As mentioned in my previous thread, I had virus in my phone which was somehow attached to the system, so if even didn't remove when I tried to Factory Reset it many time. The user @sdeepb told me to wipe everything and then flash the Stock ROM again.
First of all I rooted it using King Root and removed some system apps which were demanding root access, but it also didn't stop advertisements. So then I installed TWRP v2.7.0.0 using this method: https://www.youtube.com/watch?v=JvJFIQLXa5s
Then I booted into recovery, first made backup of that ROM, I thought that the backup would store in sdcard but it stored in phone's own memory. I wiped Dalvik cache, Cache, Data, Internal SD-card, Android Secure and System. It also deleted the backup
Then I tried many ROMs from here (needrom.com). But in all ROMs, after flashing, when I tried to boot it, phone only shows Lenovo's logo. Last night I waited for 20 minutes but nothing happened. Then I flashed another ROM. Then tried booting it and didn't disturb it for 45 minutes. But still it is not booting the ROM.
(Also, when I try to boot to boot-loader from recovery, I my phone shows black screen on which it is written "=> FASTBOOT mode..." on the bottom.
Solution: http://forum.xda-developers.com/android/help/solution-lenovo-s650-stuck-boot-loop-t3274599
I own the Nexus 9 (Wi-fi model) and am running Android 6.0 MRA58N, rooted with the TWRP recovery. I wanted to to update to android 6.0.1 so downloaded the latest factory image (MMB29R) from Google's website. I rebooted to TWRP so I could flash the new image. When I realized that you cannot flash system.img through TWRP I had already flashed the boot.img. I attempted to reboot only to get stuck in a bootloop. "Luckily me" I had taken a backup through TWRP previously (boot, data and system). So I went again in TWRP, factory reset and restored (successfully as per the message) the backup. Now every time I boot I see Google's logo, then the "Your device is corrupt" message, that I'm seeing since I installed TWRP (it doesn't seem to affect anything) and then a blank screen that goes on forever.
I had this backup moved to my hard drive and the moved it back to my device. Tried the "fix permissions" option in TWRP as well. No go.
Any suggestions?
I managed to fix it by installing the system, cache, boot and vendor partitions from the new build and the data partition from my nandroid backup.
same happen to me yesterday..what i did is,reboot into fastboot.and then flash vendor, system, boot, cache and also recovery..i have twrp install,but it show 0mb on internal storage.flash stock recovery fix that problem..and after that i flash twrp,supersu and elementalx again..it fix my problem
Sent from my Nexus 9 using Tapatalk
hi today i unlock my poco, and try to flash recovery and mi globe, i flash the orange fox 9.0, and flash the rom, the problem its when i boot to system, a message of my phone was encrypted and i need to perform a wipe data, i try wiping data, and wipe sd, and nothing change, also i flash again and flash then the disableencryptiontreble 17.3, and the same things happen, some solution??
have you tried to format data? not just wipe data
chanta96 said:
hi today i unlock my poco, and try to flash recovery and mi globe, i flash the orange fox 9.0, and flash the rom, the problem its when i boot to system, a message of my phone was encrypted and i need to perform a wipe data, i try wiping data, and wipe sd, and nothing change, also i flash again and flash then the disableencryptiontreble 17.3, and the same things happen, some solution??
Click to expand...
Click to collapse
i have the same issue, tried different recovery projects, OFRP and TWRP. both seem to have the same issue, with the message "encryption unsuccessful" and if i tried to press the "RESET DEVICE" button i get stuck in a boot loop.
i also factory reset my device, formatted everything via the recovery project menu then booted into recovery and installed the CUSTOM ROMS.
tried also to DFE but nothing seem to change even with encryption disabled.
but i scarcely manged to bypass this issue by; after wiping everything boot into recovery and install whatever rom you want and install gapps after it, better still install firmware vendor if the rom of your choice doesnt include them.
never mind, i fixed it.
in my case i was trying to flash LineageMicroG 16 on my Device and i kept getting that error and i did the following to fix it;
wiped everything and wrote "yes" to format the date and swiped for a factory reset through recovery wipe option then i booted into recovery and flashed LineagemicroG 16 after that i flashed optimus drunk kernel and booted into system and everything seemed to work fine, the kernel is what fixed the problem.