Battery charging problem in A311 - Micromax Canvas Nitro A310/A311

Hey , i am using Micromax A311, my mobile was charging 100% in 1:30 hours about but a few days ago its got switch off due to 0% battery ( electricity problem) and now after its my mobile is taking 7-8 hours for full charging , about 1% in 6 minutes
Also battery is draining fastly
Any advise? What should i do?
Sent from my Micromax A311 using XDA Free mobile app

try this
bangarawa said:
Hey , i am using Micromax A311, my mobile was charging 100% in 1:30 hours about but a few days ago its got switch off due to 0% battery ( electricity problem) and now after its my mobile is taking 7-8 hours for full charging , about 1% in 6 minutes
Also battery is draining fastly
Any advise? What should i do?
Sent from my Micromax A311 using XDA Free mobile app
Click to expand...
Click to collapse
if rooted user
then try calibrating the battery via cwm or twrp
if unroted try a factory reset
if problem persists contact micromax service centre

yogesh.kalyana said:
if rooted user
then try calibrating the battery via cwm or twrp
if unroted try a factory reset
if problem persists contact micromax service centre
Click to expand...
Click to collapse
Yes, i have rooted my phone with kingoroot and tried to install cwm but cwm didnt works than i replaced kinguser with superuser and tried again for cwm ( with mobile mtk uncle tool) but no cwm works for A311 , my phone reboots in same stock recovery
Please help me in installing cwm and than please tell me steps of calibrating battery
Sent from my Micromax A311 using XDA Free mobile app

Did you check whether you have full root access after installing SuperSU?
If yes, then what error do you get while trying to install the recovery?

So far It does not work
bangarawa said:
Yes, i have rooted my phone with kingoroot and tried to install cwm but cwm didnt works than i replaced kinguser with superuser and tried again for cwm ( with mobile mtk uncle tool) but no cwm works for A311 , my phone reboots in same stock recovery
Please help me in installing cwm and than please tell me steps of calibrating battery
Sent from my Micromax A311 using XDA Free mobile app
Click to expand...
Click to collapse
first thing is that CWM is something i have not tried for A311 and A310 as it is not reliable
but the best thing to work with is TWRP recovery
i have a thread for it's Installation
head over to the link and get it done !
click Here

yogesh.kalyana said:
first thing is that CWM is something i have not tried for A311 and A310 as it is not reliable
but the best thing to work with is TWRP recovery
i have a thread for it's Installation
head over to the link and get it done !
click Here
Click to expand...
Click to collapse
Okay , i installed TWRP recovery but there is no option for battery calibration in recovery mode, what to do?
Sent from my Micromax A311 using XDA Free mobile app

OK!
bangarawa said:
Okay , i installed TWRP recovery but there is no option for battery calibration in recovery mode, what to do?
Sent from my Micromax A311 using XDA Free mobile app
Click to expand...
Click to collapse
To wipe battery stats in TWRP, do the following:
boot into TWRP recovery
advanced>>>>>>File Manager
data>>>>>>>system
click batterystats.bin
click Delete
go back to main menu
reboot system

Thank you sir
I was able to do battery calibration but problem not solved yet so i think i need to go for micromax service centre
Sent from my Micromax A311 using XDA Free mobile app

I downloaded a charging app which tells me mA(mili ampere) of charger
My phone starts charging with 844mA but after few seconds mA goes lower and lower 844 to 804 than 756mA ....
Sent from my Micromax A311 using XDA Free mobile app

I have a problem with same mobile my phone is not charging more thn 1% even in hours it always shows 1% any suggestions

Related

[Q] [HELP] Micromax Canvas HD A116 Not Starting

Hello
My Micromax A116 is not starting. Its stuck on teh Canvas HD screen while booting. I was installing Chainfire 3d and as soon as i gave it super user access , the phone rebooted and it didn't started. Everytime i try to start , it stucks on the Canvas HD logo screen and nothing happens.
Please help!
christiano9911 said:
Hello
My Micromax A116 is not starting. Its stuck on teh Canvas HD screen while booting. I was installing Chainfire 3d and as soon as i gave it super user access , the phone rebooted and it didn't started. Everytime i try to start , it stucks on the Canvas HD logo screen and nothing happens.
Please help!
Click to expand...
Click to collapse
Try fix permission, you can user ROM manager or titanium back up, if that doesn't work then reflash the entire Rom.
eagledipesh said:
Try fix permission, you can user ROM manager or titanium back up, if that doesn't work then reflash the entire Rom.
Click to expand...
Click to collapse
The same thing happened to me just now. Struck in boot logo.
I have already installed CWM recovery so when i tried restoring it says m5 sum error.
What do i do?
G.Ashwinkumar said:
The same thing happened to me just now. Struck in boot logo.
I have already installed CWM recovery so when i tried restoring it says m5 sum error.
What do i do?
Click to expand...
Click to collapse
I assume that the backup was taken earlier using CWM recovery and now you are trying to restore the same, try complete wipe and then restore, if it doesn't work then re install a fresh ROM.
eagledipesh said:
I assume that the backup was taken earlier using CWM recovery and now you are trying to restore the same, try complete wipe and then restore, if it doesn't work then re install a fresh ROM.
Click to expand...
Click to collapse
Yes i took it earlier and now trying to restore.i have already tried factory reset but still it doesnt boot. What do i do?
---------- Post added at 11:51 AM ---------- Previous post was at 11:49 AM ----------
G.Ashwinkumar said:
Yes i took it earlier and now trying to restore.i have already tried factory reset but still it doesnt boot. What do i do?
Click to expand...
Click to collapse
Will installing a fresh rom end my problem?
eagledipesh said:
Try fix permission, you can user ROM manager or titanium back up, if that doesn't work then reflash the entire Rom.
Click to expand...
Click to collapse
tried fix permission but nothing happenned.
where do i get the official rom?
G.Ashwinkumar said:
Yes i took it earlier and now trying to restore.i have already tried factory reset but still it doesnt boot. What do i do?
---------- Post added at 11:51 AM ---------- Previous post was at 11:49 AM ----------
Will installing a fresh rom end my problem?
Click to expand...
Click to collapse
Yes it should solve the issue, try flashing the tool VIA SP Flash Tool. here is the link to download stock rom provided by Micromax
http://www.moulnisky.com/index.php?dir=Micromax/A116/Software version/V3_270513(Jelly bean 4.2)/
You will lose all your data, try it at your own risk, i am not responsible if your phone bricks, if you are not comfortable go to the service station and get it flashed.
christiano9911 said:
tried fix permission but nothing happenned.
where do i get the official rom?
Click to expand...
Click to collapse
Check this link below, this is stock ROm without root.
http://www.moulnisky.com/index.php?dir=Micromax/A116/Software version/V3_270513(Jelly bean 4.2)/
Instructions : http://forum.xda-developers.com/showthread.php?t=2308431
For rooting you can follow this thread : http://forum.xda-developers.com/showthread.php?t=2292971
eagledipesh said:
Yes it should solve the issue, try flashing the tool VIA SP Flash Tool. here is the link to download stock rom provided by Micromax
http://www.moulnisky.com/index.php?dir=Micromax/A116/Software version/V3_270513(Jelly bean 4.2)/
You will lose all your data, try it at your own risk, i am not responsible if your phone bricks, if you are not comfortable go to the service station and get it flashed.
Check this link below, this is stock ROm without root.
http://www.moulnisky.com/index.php?dir=Micromax/A116/Software version/V3_270513(Jelly bean 4.2)/
Instructions : http://forum.xda-developers.com/showthread.php?t=2308431
For rooting you can follow this thread : http://forum.xda-developers.com/showthread.php?t=2292971
Click to expand...
Click to collapse
Flashed a cutom ROM through CWM now working fine.
G.Ashwinkumar said:
Flashed a cutom ROM through CWM now working fine.
Click to expand...
Click to collapse
Please press thanks if i have help you....
Micromax Canvas hd A116 is not getting started!
Helloo..
Please help me as I bought Micromax Canvas hd A116 3 months before and it was my worst experience with micromax, I wish I had purchase samsung.
Its just 3 months and my phone is not getting started.. tried to charge the phone but its not getting charge.. its completely switched off..
battery conditions is also so bad.. have to charge all the day.
Anyone can help me here??
My micromax a50 not booting up
i was trying to install a kernel which was for enabling swap facility in my micromax a50 whose link I got form this site onlly..... When i instaled it from zip using recovery and rebooted it didn;t boot....... plz help me......... can reinstalling the stock rom after downloading it from internet can solve the problem
ronakandro said:
i was trying to install a kernel which was for enabling swap facility in my micromax a50 whose link I got form this site onlly..... When i instaled it from zip using recovery and rebooted it didn;t boot....... plz help me......... can reinstalling the stock rom after downloading it from internet can solve the problem
Click to expand...
Click to collapse
Yup....re install ur stock ROM and u r good to go
I'm not responsible if u brick ur device.. Hit thanks
Use Sp flash tool method instead of clockmode recovey
You should use SP flash Tool method For flashing Stock Rom,it is very safe and Trusted.
Help from Canvas HD
I faced the same problem. My battery got swollen and is of no use. Now I have switched to ERD battery. Not bad . but is not too good , because its only 1250 mAh. But , should tell you, is working for its worth.
Alka10 said:
Helloo..
Please help me as I bought Micromax Canvas hd A116 3 months before and it was my worst experience with micromax, I wish I had purchase samsung.
Its just 3 months and my phone is not getting started.. tried to charge the phone but its not getting charge.. its completely switched off..
battery conditions is also so bad.. have to charge all the day.
Anyone can help me here??
Click to expand...
Click to collapse
Best available option take it to the service center, or try installing cwm recovery or your entire stock rom through Sp flashtools.
Brom error : S_da_sdmmc_write_failed
Hello
My Micromax A116 is not starting. Its stuck on teh Canvas HD screen while booting. I was installing Chainfire 3d and as soon as i gave it super user access , the phone rebooted and it didn't started. Everytime i try to start , it stucks on the Canvas HD logo screen and nothing happens.
After reading this Thread i tried reintalling fresh rom
I downloaded
1.Mobistel_Cynus_T1_Drivers_x86
2.SP_Flash_Tool_v3.1304.0.119 (latest)
3.MT6589_Android_scatter_emmc in the Sub folder (S9201_4.2_MP_F3F8_B1_IN_MMX_09_FLASHER_USER)
But i'm getting error in SP Flash tool:
BROM ERROR : S_DA_SDMMC_WRITE_FAILED (3149)
Please Help my phone is still not working and me alone at home not able to contact anyone.
Please help!
arungautam10 said:
Hello
My Micromax A116 is not starting. Its stuck on teh Canvas HD screen while booting. I was installing Chainfire 3d and as soon as i gave it super user access , the phone rebooted and it didn't started. Everytime i try to start , it stucks on the Canvas HD logo screen and nothing happens.
After reading this Thread i tried reintalling fresh rom
I downloaded
1.Mobistel_Cynus_T1_Drivers_x86
2.SP_Flash_Tool_v3.1304.0.119 (latest)
3.MT6589_Android_scatter_emmc in the Sub folder (S9201_4.2_MP_F3F8_B1_IN_MMX_09_FLASHER_USER)
But i'm getting error in SP Flash tool:
BROM ERROR : S_DA_SDMMC_WRITE_FAILED (3149)
Please Help my phone is still not working and me alone at home not able to contact anyone.
Please help!
Click to expand...
Click to collapse
Are you admin ??
that's because the version of ur SP tool old.Google ' latest sp tool ' and get the version which is lyk 'v1.1.13' or so... it! I'll work...
Sent from my Micromax A116 using xda app-developers app
Plz help some mmx hd can't start
Plz help me.... Am installed cwm recovery on it....nd trying to install macrocream rom (rom of canvas 2) then i reboot my phone and it switch off..nd not starting.... Recovery mode cannot support by power key and volum - key... Plz help...also not charging on switch off ...
If you have cwm just download from here and flash.... http://d-h.st/fXr
Sent from my Nexus 4 using XDA Premium 4 mobile app

[Q] phone got bricked after flashing it with suvi rom

hey guys! im in trouble, i flashed my micromax canvas hd with custom rom called "suvi rom" i did all steps perfectly it said installed succesfully, but when i reboot it nothing happens. it got bricked!
saqawat said:
hey guys! im in trouble, i flashed my micromax canvas hd with custom rom called "suvi rom" i did all steps perfectly it said installed succesfully, but when i reboot it nothing happens. it got bricked!
Click to expand...
Click to collapse
Can you pls tell me in brief may i can help you as i have faced similar issue but retrieved my mobile back fine working
I've not heard any case of bricking with A116 so far. Try to flash stock rom using SP tool. Make sure the battery is sufficiently charged.
sumit.gore21488 said:
Can you pls tell me in brief may i can help you as i have faced similar issue but retrieved my mobile back fine working
Click to expand...
Click to collapse
i first wiped data,partitions and dalvik cache after that went on to install from sd card. i placed the zip file in external sd card so i choose the location from where to retrieve. then its says installation started and it was in progress everything goes as it should be, after that it says rom installed enjoy! so, i click on go back and reboot it.. after that my fone is not switching on.. when i put on charge nothing happening, i removed the battery then again inserted still nothing happens
saqawat said:
i first wiped data,partitions and dalvik cache after that went on to install from sd card. i placed the zip file in external sd card so i choose the location from where to retrieve. then its says installation started and it was in progress everything goes as it should be, after that it says rom installed enjoy! so, i click on go back and reboot it.. after that my fone is not switching on.. when i put on charge nothing happening, i removed the battery then again inserted still nothing happens
Click to expand...
Click to collapse
Try this
1. check if you are able to get back to your recovery mode. If it goes cool then flash any other ROM made for canvas A116 HD only. If you dont have download it first and paste in your memory card. you can access your memory card from recovery mode from advance --> mount option. This can be done only if you are able to access your recovery mode by pressing volume up+down and Lock keys together. Keep pressing for more time till you go in recovery mode
2. If you are unable to go to recovery then simply flash the stock rom 4.2 via SP flash tool by removing battery (Pls search for SP Flash tool method in XDA Canvas HD section)
Pls revert if you are able to do any of these..
Press Thanks If I Helped You...........
First of all all the mtk devices are unbrickable u can flash the firmware from sp tools.goodluck if u find any problems ping me !
my canvas hd got hardbrick when flashed with suvirom....
prithvirao17 said:
I've not heard any case of bricking with A116 so far. Try to flash stock rom using SP tool. Make sure the battery is sufficiently charged.
Click to expand...
Click to collapse
actually by mistake i also disabled the flash recovry<cmv>and when tired to unbrick with original stock rom with sp flash tool....its giving me sp flash tool error 8200...the target inconsistent...my phones not charging ...not booting what to do????any help for me???
---------- Post added at 06:57 AM ---------- Previous post was at 06:51 AM ----------
Zafar7777 said:
First of all all the mtk devices are unbrickable u can flash the firmware from sp tools.goodluck if u find any problems ping me !
Click to expand...
Click to collapse
i got stuck because of worng <error> during flashing...and then using sp flash tool also..as my phones...not booting...nor charging...not even the dispalys blinks...nor charging light...totally dead...how to recover such phone...the sp flash tool is showing error 8200..target incosistent,no space...i think i erased the whole rom and thats why not able to flash from sp tool...help???
Solution
swapsz said:
actually by mistake i also disabled the flash recovry<cmv>and when tired to unbrick with original stock rom with sp flash tool....its giving me sp flash tool error 8200...the target inconsistent...my phones not charging ...not booting what to do????any help for me???
---------- Post added at 06:57 AM ---------- Previous post was at 06:51 AM ----------
i got stuck because of worng <error> during flashing...and then using sp flash tool also..as my phones...not booting...nor charging...not even the dispalys blinks...nor charging light...totally dead...how to recover such phone...the sp flash tool is showing error 8200..target incosistent,no space...i think i erased the whole rom and thats why not able to flash from sp tool...help???
Click to expand...
Click to collapse
Change your SP tool Software Version And google SP_Flash_Tool_v3.1304.0.119 Version and then Tell me after it Is any error Show or not
Give link to rom
Sent from my A116 using XDA Free mobile app
?
shivambajaj said:
Give link to rom
Sent from my A116 using XDA Free mobile app
Click to expand...
Click to collapse
Please Specify The Name Of the Rom ?
saqawat said:
hey guys! im in trouble, i flashed my micromax canvas hd with custom rom called "suvi rom" i did all steps perfectly it said installed succesfully, but when i reboot it nothing happens. it got bricked!
Click to expand...
Click to collapse
shivambajaj said:
Give link to rom
Sent from my A116 using XDA Free mobile app
Click to expand...
Click to collapse
Raj_Chandigarh said:
Please Specify The Name Of the Rom ?
Click to expand...
Click to collapse
Guys "Suvi ROM" is for A110 Canvas 2 not for A116 Canvas HD !! Now if u have flashed the wrong ROM.... Try to flash the '"correct'" Stock ROM of A116 via SP Flash Tools !!
Follow this post ..... http://forum.xda-developers.com/showthread.php?p=42269382
saqawat said:
hey guys! im in trouble, i flashed my micromax canvas hd with custom rom called "suvi rom" i did all steps perfectly it said installed succesfully, but when i reboot it nothing happens. it got bricked!
Click to expand...
Click to collapse
didnt you backup before flashing this ROM?

QMobile A600 (Micromax A116) A Little Help Please

I am XDA Forum user having QMobile A600 (Micromax A116). I got my devices rooted through the software provided.
I have super user right, installed ROM Manager & TWRP. But when I try to install any recovery, It boots & gives an error sign (picture 1) & if I press power button. It loads stock recovery option. Factory Reset, Dalvik, Cache & Data not wiped. No ROM gets installed. I rooted my device through mt6589_rooter software available online.
Help please, nothing happening for me. It doesnt install or recover any thing. I am not even able to back up stock ROM through TWRP.
This is stock recovery.......not twrp
Sent from my Nexus 4 using xda premium
That is what I meant. Whatever I do. It loads stock recovery & does nothing. No flashing at all. I have used ROM Manager, CWM & TWRP, all that loads is stock recovery.
Sent from my A600 using xda app-developers app
whgul said:
I am XDA Forum user having QMobile A600 (Micromax A116). I got my devices rooted through the software provided.
I have super user right, installed ROM Manager & TWRP. But when I try to install any recovery, It boots & gives an error sign (picture 1) & if I press power button. It loads stock recovery option. Factory Reset, Dalvik, Cache & Data not wiped. No ROM gets installed. I rooted my device through mt6589_rooter software available online.
Help please, nothing happening for me. It doesnt install or recover any thing. I am not even able to back up stock ROM through TWRP.
Click to expand...
Click to collapse
Keval is right.
you have not rooted your device by flashing a custom recovery img you have used a software which just gives you super user rights...
please flash a cynogenmode or twrp recovery and then try again
try this
http://forum.xda-developers.com/show...&postcount=297
Hope it will help you
Please Press on THANKS:good:
rohanraarora said:
Keval is right.
you have not rooted your device by flashing a custom recovery img you have used a software which just gives you super user rights...
please flash a cynogenmode or twrp recovery and then try again
try this
http://forum.xda-developers.com/show...&postcount=297
Hope it will help you
Please Press on THANKS:good:
Click to expand...
Click to collapse
Thanks Dear
I rooted my device through mt6589_rooter & checked through many software (Root Checker, SuperUser etc).
I downloaded & installed CWM, ROM Manager & TWRP from play store. All of them show me rooted. Yea, you are right I haven't installed any custom recovery. Just want to first backup my stock ROM before flashing any custom rom. But nothing is happening for me. Whenever I try to to backup or apply any update, it boots me to stock recovery, nothing happens. Another thing, both show my device not listed / supported (QMobile Noir A600)
The link you provided is invalid. I have searched the forum, it provides version 2.x.x. I have installed CWM, TWRP both are 5.x.
So I should assume, I'm not going to get any Support?
Sent from my A600 using xda app-developers app
whgul said:
So I should assume, I'm not going to get any Support?
Sent from my A600 using xda app-developers app
Click to expand...
Click to collapse
Root your device using Farmaroot App then install latest TWRP v2.7.0.0 via MobileUncle MTK Tools App !! After this flash any desired ROM..
Did install the App.
Possible case once application is launched:
1. A popup saying "Your device seems not vulnerable to exploit included in Framaroot", in this case you can uninstall app
2. You seeing one or more exploit name, also click on one after you have selected an action and you will see one of the above messages.
Unfortunately got the first message & App closes. Not happening for me
Sent from my A600 using xda app-developers app
whgul said:
Did install the App.
Possible case once application is launched:
1. A popup saying "Your device seems not vulnerable to exploit included in Framaroot", in this case you can uninstall app
2. You seeing one or more exploit name, also click on one after you have selected an action and you will see one of the above messages.
Unfortunately got the first message & App closes. Not happening for me
Sent from my A600 using xda app-developers app
Click to expand...
Click to collapse
Try using this app on A116 stock ROM...Flash it via SP Tools !!!
Don't have any SP Tool. I've QMobile (Pakistan) same like MicroMax (India). CWM/TWRP show not supported. No SP Tool. Titanium Backup not helping. Either no support for QMobile or I'm too dumb. I guess case is 2nd one.
Anyhow thanks guys but I might stick to stock ROM & leave custom ROM
Sent from my A600 using xda app-developers app
whgul said:
Don't have any SP Tool. I've QMobile (Pakistan) same like MicroMax (India). CWM/TWRP show not supported. No SP Tool. Titanium Backup not helping. Either no support for QMobile or I'm too dumb. I guess case is 2nd one.
Anyhow thanks guys but I might stick to stock ROM & leave custom ROM
Sent from my A600 using xda app-developers app
Click to expand...
Click to collapse
Its supports all things supported by A116 because it is a clone !! Go ahead and try....
Sent from my SGT 7 running Omni ROM Official Kitkat Nightlies
whgul said:
Thanks Dear
I rooted my device through mt6589_rooter & checked through many software (Root Checker, SuperUser etc).
I downloaded & installed CWM, ROM Manager & TWRP from play store. All of them show me rooted. Yea, you are right I haven't installed any custom recovery. Just want to first backup my stock ROM before flashing any custom rom. But nothing is happening for me. Whenever I try to to backup or apply any update, it boots me to stock recovery, nothing happens. Another thing, both show my device not listed / supported (QMobile Noir A600)
The link you provided is invalid. I have searched the forum, it provides version 2.x.x. I have installed CWM, TWRP both are 5.x.
Click to expand...
Click to collapse
Sorry for late reply i lost my device...:crying::crying::crying::crying::crying: and wrong link
Yup that,s the problem bro no great support or services are provided for these devices to automatically install recoveries and flashing these devices using SP tool is a pain in *** try sideloading using adb tools i havent tried was going to do but lost the device.
Search about it on xda
android recovery 3 is also good if you dont want to flash custom rom
use adaway or freedom app and other great apps to get the best of root.
Thanks
Do tell me if that worked or if you came with a new method.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Press Thanks if my time saved yours..
Tried to sound smart, bricked my mobile. It was in warranty. The company repaired and charged nothing. Not going to brick it again.
I think my flashing days are over
Sent from my A600 using xda app-developers app

Any other method for factory reset without recovery?

I have a pattern lock on my micromax bolt a35 which i forget. And the phone has no recovery inbuilt. And so I want to know any other method of factory reset without going to recovery. Here information:-
I donot have root access on phone.
Plz avoid any PC method.
Thank you in advance.
Sent from my Micromax P650 using xda app-developers app
Preet Juneja said:
I have a pattern lock on my micromax bolt a35 which i forget. And the phone has no recovery inbuilt. And so I want to know any other method of factory reset without going to recovery. Here information:-
I donot have root access on phone.
Plz avoid any PC method.
Thank you in advance.
Sent from my Micromax P650 using xda app-developers app
Click to expand...
Click to collapse
try this: Shut down the phone and try to enter the recovery mode, on my samsung i press home key+vol up+ unlock button, and even if it's the stock rom you can wipe the data
i tried it all but it wont goes into recovery it goes on safe mode
Sent from my Micromax P650 using xda app-developers app
Preet Juneja said:
i tried it all but it wont goes into recovery it goes on safe mode
Sent from my Micromax P650 using xda app-developers app
Click to expand...
Click to collapse
try usb jig
what is usb jig??
Sent from my Micromax P650 using xda app-developers app

How to manually update MIUI 4.7.18 to 4.7.25

I am using Micromax Canvas a116 HD , i tried to manually update it from recovery but after starting the phone and selecting up for recovery , nothing happens , its just a black screen and after starting the phone, in the updater app , the update is not being shown. Can you please help with any solution?
update with miui
aab1290 said:
I am using Micromax Canvas a116 HD , i tried to manually update it from recovery but after starting the phone and selecting up for recovery , nothing happens , its just a black screen and after starting the phone, in the updater app , the update is not being shown. Can you please help with any solution?
Click to expand...
Click to collapse
Which recovery u r using ?
Go with this recoveryhttp://forum.xda-developers.com/devdb/project/dl/?id=6321
Install with this https://play.google.com/store/apps/details?id=com.cgollner.flashify&hl=en&referrer=utm_source%3Dgoogle%26utm_medium%3Dorganic%26utm_term%3Dflashify&pcampaignid=APPU_d_voU4_PIJHq8AX6nIL4Aw.
Then try to update miui patch it will work ..
Remember wipe dalvik catch after install the patch:good::good:

Categories

Resources