Where can i find stock recovery for cid: CWS__001? - AT&T HTC One (M8)

i need it in order to get an ota update

Stock Recoery
JOE180360 said:
i need it in order to get an ota update
Click to expand...
Click to collapse
you can get your stock recovery here http://forum.xda-developers.com/showthread.php?t=2701376

SadisticOne said:
you can get your stock recovery here http://forum.xda-developers.com/showthread.php?t=2701376
Click to expand...
Click to collapse
Only recovery.img posted there is for 1.12.502, which is very old.
Its easy enough to RUU to stock, which is why you don't see stock recovery or ROM files posted too often for the AT&T version. Plus, RUU guarantees the ROM is stock (if the ROM is modified, the OTA fail).

Here's the one I grabbed from my current stock rom:
https://mega.nz/#!cI5Ama7L!dofleIjy1mEgtSgHzfacIvncleF7GGGhr4Xsuk3bgxY

Related

[Q] From Revolution HD 6.2 back to stock

I have flashed Revolution HD 6.2 on my HTC One X+.
Now I want to go back to Stock but I don't know how. According to this Post I downloaded a file called "RUU_ENRC2B_U_JB_45_HTC_Europe_1.17.401.1_Radio_3.1204.168.32_release_299688_signed" and tried to install it, but it tells me it cannot flash my device. What else can I do?
Please help!
htconexplus said:
I have flashed Revolution HD 6.2 on my HTC One X+.
Now I want to go back to Stock but I don't know how. According to this Post I downloaded a file called "RUU_ENRC2B_U_JB_45_HTC_Europe_1.17.401.1_Radio_3.1204.168.32_release_299688_signed" and tried to install it, but it tells me it cannot flash my device. What else can I do?
Please help!
Click to expand...
Click to collapse
as always, run the RUU while the boot loader is locked. Make sure the device ID matches. If it is locked already unlock, flash your stock recovery RELOCK and try again.
This would be my 1st reply...
Can some one help me for this.
I do unlocked, flash boot, flash recovery (Failed alot of time due to not for ONE X+ version), now using TWRP to 2.3.3.0 (AT&T/Telus and INTL)
After that I want to flash custom ROM ( http://forum.xda-developers.com/showthread.php?t=1987885 ( Android Revolution HD 6.2 ), and flash the Boot.img for 6.x.
Then I not start flash custom ROM yet, and do NANDROID from TWRP.
So is that my boot.img is stock boot? Because I want keep NANDROID Backup.
And now I using HCT__044 1.17.707.1, found that RUU not available yet, so cannot get back from STOCK ROM.
Can someone upload this version for me for the boot.img if mine one is custom boot.img...
Thanks & Regards
xdacalvien said:
This would be my 1st reply...
Can some one help me for this.
I do unlocked, flash boot, flash recovery (Failed alot of time due to not for ONE X+ version), now using TWRP to 2.3.3.0 (AT&T/Telus and INTL)
After that I want to flash custom ROM ( http://forum.xda-developers.com/showthread.php?t=1987885 ( Android Revolution HD 6.2 ), and flash the Boot.img for 6.x.
Then I not start flash custom ROM yet, and do NANDROID from TWRP.
So is that my boot.img is stock boot? Because I want keep NANDROID Backup.
And now I using HCT__044 1.17.707.1, found that RUU not available yet, so cannot get back from STOCK ROM.
Can someone upload this version for me for the boot.img if mine one is custom boot.img...
Thanks & Regards
Click to expand...
Click to collapse
If you do a stock Backup you need to do it prior any rom or boot.img been flashed and keep it safe...
are you sure you are 1.17.707.1? can you post your hboot version etc
---------- Post added at 08:21 AM ---------- Previous post was at 08:12 AM ----------
htconexplus said:
I have flashed Revolution HD 6.2 on my HTC One X+.
Now I want to go back to Stock but I don't know how. According to this Post I downloaded a file called "RUU_ENRC2B_U_JB_45_HTC_Europe_1.17.401.1_Radio_3.1204.168.32_release_299688_signed" and tried to install it, but it tells me it cannot flash my device. What else can I do?
Please help!
Click to expand...
Click to collapse
What is your CID? more info is always handy
kotag82 said:
If you do a stock Backup you need to do it prior any rom or boot.img been flashed and keep it safe...
are you sure you are 1.17.707.1? can you post your hboot version etc
Yes, I use CID Getter and fasboot getvar all
ENRC2B_U_JB_45
romver" 1.17.707.1
BootLOdder: 1.35.0000
Cid: HTC__044
Carrier: HTC-Asia-SEA-WWE
Baseband: 3.1204.168.32
I updated OTA till now without update Camera for today.
And few hours ago, I already root to ARHD 6.2.
Click to expand...
Click to collapse
kotag82 said:
If you do a stock Backup you need to do it prior any rom or boot.img been flashed and keep it safe...
are you sure you are 1.17.707.1? can you post your hboot version etc
Yes, I use CID Getter and fasboot getvar all
ENRC2B_U_JB_45
romver" 1.17.707.1
BootLOdder: 1.35.0000
Cid: HTC__044
Carrier: HTC-Asia-SEA-WWE
Baseband: 3.1204.168.32
I updated OTA till now without update Camera for today.
And few hours ago, I already root to ARHD 6.2.
Click to expand...
Click to collapse
To go completely to stock you need to flash backup you made prior flashing (if you did any) and flash boot.img from backup via fastboot... Only you need stock recovery more but... I can give you only from our WWE CID HTC__001
If you have no backup you need to wait for RUU
kotag82 said:
To go completely to stock you need to flash backup you made prior flashing (if you did any) and flash boot.img from backup via fastboot... Only you need stock recovery more but... I can give you only from our WWE CID HTC__001
If you have no backup you need to wait for RUU
Click to expand...
Click to collapse
Well, thanks for your help, but it still need stock recovery, without RUU, all is impossible right now..
Any time after updates to new firmware 1.14.xxx.x to 1.17.xxx.x, so the old stock 1.14.xxx.x RUU were unusable, am I right?
I search google also cannot extract from ROM.zip (RUU) yet too...
xdacalvien said:
Well, thanks for your help, but it still need stock recovery, without RUU, all is impossible right now..
Any time after updates to new firmware 1.14.xxx.x to 1.17.xxx.x, so the old stock 1.14.xxx.x RUU were unusable, am I right?
I search google also cannot extract from ROM.zip (RUU) yet too...
Click to expand...
Click to collapse
If you have that OTA which updated your hboot there is a stock recovery, why do you need to go to stock?
kotag82 said:
If you have that OTA which updated your hboot there is a stock recovery, why do you need to go to stock?
Click to expand...
Click to collapse
Just incase when it need to send warranty, keep the STOCK ROM for safe..
Still noob, alot of things need study...
if you need 1.17.707.1 http://forum.xda-developers.com/showthread.php?p=35958152#post35958152

[Q] Official V10.4.2.18 update from CM10

I am not sure if I can do an official firmware update from ASUS if I am rooted and running a ROM.
I tried unzipping the file with TWRP but it says MD5 not recognized.
Is it because I am trying to flash an official update over a ROM.
Currently rooted, running 4.1.2, CM10-20130318
TWRP and NVFlash
Any info would be appreciated.
You can try others
SS823 said:
I am not sure if I can do an official firmware update from ASUS if I am rooted and running a ROM.
I tried unzipping the file with TWRP but it says MD5 not recognized.
Is it because I am trying to flash an official update over a ROM.
Currently rooted, running 4.1.2, CM10-20130318
TWRP and NVFlash
Any info would be appreciated.
Click to expand...
Click to collapse
I think it is dangerous to flash the official ROM with lower version to you twrp.
You can try this below.
http://forum.xda-developers.com/showthread.php?t=2147895
By the way,
the Md5 is the checksum of your file, it doesn't deal with anything about whether flashable or not.
Hope it may help you.
trashprince said:
I think it is dangerous to flash the official ROM with lower version to you twrp.
You can try this below.
http://forum.xda-developers.com/showthread.php?t=2147895
By the way,
the Md5 is the checksum of your file, it doesn't deal with anything about whether flashable or not.
Hope it may help you.
Click to expand...
Click to collapse
Thanks, I think you need the JB bootloader thought for that ROM. Also I the ROM is 4.1.1. I was trying to upgrade to 4.2

[Q] How to get the new 4.3 update with a custom recovery?

I want to update my phone but I have TWRP as my custom recovery, is there any way to install the update from there? Or do I need to get the stock recovery back?
Jpixta said:
I want to update my phone but I have TWRP as my custom recovery, is there any way to install the update from there? Or do I need to get the stock recovery back?
Click to expand...
Click to collapse
You have to be stock to install the OTA update. If you want to wait, I am sure there will be a flashable zip of the stock ROM in the Developer forum.
hawkye said:
You have to be stock to install the OTA update. If you want to wait, I am sure there will be a flashable zip of the stock ROM in the Developer forum.
Click to expand...
Click to collapse
Is it likely that this flashable zip will also include any kernel and radio updates that the OTA update has?
JohnHenrySDM said:
Is it likely that this flashable zip will also include any kernel and radio updates that the OTA update has?
Click to expand...
Click to collapse
You can update the firmware now as it has been posted already to get the new radio. Kernel is part of the ROM and/or a flashable Zip.

[Q]update radio and firmware for ATT HTC One

Is it safe/OK to flash/update my radio and firmware?
My ATT HTC One get bootloader unlocked and customized recovery to CWM and then rooted. flashed with CM11 and I believe it is still S-on.
Radio4.4.2 ATT OTA/4.18.502.7) Radio_4T.24.3218.09_10.26.1718.01L
Firmwarelatest) ATT 4.4.2 OTA/4.18.502.7 Custom Firmware (Stock Boot.img and Stock Recovery removed)
from this post, http://forum.xda-developers.com/showthread.php?t=2419699
leo_cheng said:
Is it safe/OK to flash/update my radio and firmware?
My ATT HTC One get bootloader unlocked and customized recovery to CWM and then rooted. flashed with CM11 and I believe it is still S-on.
Radio4.4.2 ATT OTA/4.18.502.7) Radio_4T.24.3218.09_10.26.1718.01L
Firmwarelatest) ATT 4.4.2 OTA/4.18.502.7 Custom Firmware (Stock Boot.img and Stock Recovery removed)
from this post, http://forum.xda-developers.com/showthread.php?t=2419699
Click to expand...
Click to collapse
From your link
FIRMWARE FAQ:
Q: Do I need S-OFF for firmware flashing?
A: YES!
Q: Do I NEED to update my firmware?
A: NO! But doing so ensures optimal phone performance.
Click to expand...
Click to collapse
With s-on you can only flash original signed firmware, such as the firmware.zip extracted from the OTA package.
After flashing signed firmware you will need to reflash the custom recovery and rom zip to restore the kernel.
cschmitt said:
With s-on you can only flash original signed firmware, such as the firmware.zip extracted from the OTA package.
After flashing signed firmware you will need to reflash the custom recovery and rom zip to restore the kernel.
Click to expand...
Click to collapse
Thanks!

[Q] Update from stock 4.1.2 to custom 4.4.2 ROM and latest radio

I have been doing a lot of searching and reading for a while now and have been unable to find the answers to this..
I have an unlocked, rooted HTC One M7_UL (AT&T) with:
stock Android 4.1.2,
Sense 5.0,
TWRP 2.7.0.0,
S-ON,
software number 1.26.502.12,
radio 4A.14.3250.13,
baseband 4A.14.3250.13_10.331150.01L
HBOOT 1.44
I want to update it to the latest Android Revolution HD (71.1?) Android 4.4.2 and the latest radio.
Is "radio", "firmware", and "baseband" all the same thing? Seems like I see them used interchangeably..
What are the steps to get there? Do I just flash the ARHD ROM and then the radio?
Do I need S-OFF to flash the radio? Some places said yes, some said no.
Do I need to go to a stock 4.4.2 ROM first then to ARHD?
Also, I've seen "kernels" such as ElementalX and Bulletproof. But I think these can be flashed anytime, correct?
Thanks.
Frenetik said:
I have been doing a lot of searching and reading for a while now and have been unable to find the answers to this..
I have an unlocked, rooted HTC One M7_UL (AT&T) with:
stock Android 4.1.2,
Sense 5.0,
TWRP 2.7.0.0,
S-ON,
software number 1.26.502.12,
radio 4A.14.3250.13,
baseband 4A.14.3250.13_10.331150.01L
HBOOT 1.44
I want to update it to the latest Android Revolution HD (71.1?) Android 4.4.2 and the latest radio.
Is "radio", "firmware", and "baseband" all the same thing? Seems like I see them used interchangeably..
What are the steps to get there? Do I just flash the ARHD ROM and then the radio?
Do I need S-OFF to flash the radio? Some places said yes, some said no.
Do I need to go to a stock 4.4.2 ROM first then to ARHD?
Also, I've seen "kernels" such as ElementalX and Bulletproof. But I think these can be flashed anytime, correct?
Thanks.
Click to expand...
Click to collapse
Kernels are firmware specific please read the specific threads! and yes to flash custom roms of higher android version it is a must to update your stock rom first!
SpinXO said:
Kernels are firmware specific please read the specific threads! and yes to flash custom roms of higher android version it is a must to update your stock rom first!
Click to expand...
Click to collapse
By "firmware" do you mean 4.1.2, 4.3, 4.4.3, etc.? Some places seem to call the "radio" the "firmware"...
So can I flash the "stock" that is on this page (android-revolution-hd.blogspot.com/p/android-revolution-hd-mirror-site-var.html) and then ARHD?
Is there a reason you can't flash straight to a custom ROM from stock?
Frenetik said:
By "firmware" do you mean 4.1.2, 4.3, 4.4.3, etc.? Some places seem to call the "radio" the "firmware"...
So can I flash the "stock" that is on this page (android-revolution-hd.blogspot.com/p/android-revolution-hd-mirror-site-var.html) and then ARHD?
Is there a reason you can't flash straight to a custom ROM from stock?
Click to expand...
Click to collapse
Their is a no. of dependencies are full firmware flash upgrades like in htc - system,hboot,radio which are needed by the rom to work that is why I suggest full RUU/Firmware flash instead of just updating the required manually
SpinXO said:
Their is a no. of dependencies are full firmware flash upgrades like in htc - system,hboot,radio which are needed by the rom to work that is why I suggest full RUU/Firmware flash instead of just updating the required manually
Click to expand...
Click to collapse
Okay. thanks. I'm still S-ON. Do I need to get S-OFF using Revone to lock the bootloader? Then go back to S-ON and use the RUU to
get back full stock? Then update to stock 4.4.3?
Frenetik said:
Okay. thanks. I'm still S-ON. Do I need to get S-OFF using Revone to lock the bootloader? Then go back to S-ON and use the RUU to
get back full stock? Then update to stock 4.4.3?
Click to expand...
Click to collapse
As I am not an HTC Device user I don't know the processor but you can surely see into the HTC One M7 Section

Categories

Resources