Hello guys,
I am searching for help, my elephone g6 does not start, rebooted it yesterday and it did not started ever again, not even in recovery mode, i tryed to flash stock rom but can't get him recognised by my computer, the omputer is always playing the sound connect->disconnect->connect->disconnect, within 30 seconds space more or less. i have no idea what to do more, anyone knws the problem and a possible solution?
cheers
thanks in advance.
Try looking up some recovery software from the manufacturer like HTC does. Otherwise is a little to vague.
scottbear said:
Try looking up some recovery software from the manufacturer like HTC does. Otherwise is a little to vague.
Click to expand...
Click to collapse
So, i got my phone to connect to the computer, but the SP flash tools goes to 100% red bar and doesn't do anything more, i am doing everything correctly but it just gets stuck 100% red bar and don't move it has ben like 30+ minutes and nothing, any tip on that?
cheers
n3las said:
So, i got my phone to connect to the computer, but the SP flash tools goes to 100% red bar and doesn't do anything more, i am doing everything correctly but it just gets stuck 100% red bar and don't move it has ben like 30+ minutes and nothing, any tip on that?
cheers
Click to expand...
Click to collapse
No clue. Have you tried flashing a recovery?
scottbear said:
No clue. Have you tried flashing a recovery?
Click to expand...
Click to collapse
hello again, yes i tryed and that's my problem, my SPflashtools just get stuck with a 100% progreress red bar and does not move on, i have done everything correctly, exact stock rom, drivers and so.
n3las said:
Hello guys,
I am searching for help, my elephone g6 does not start, rebooted it yesterday and it did not started ever again, not even in recovery mode, i tryed to flash stock rom but can't get him recognised by my computer, the omputer is always playing the sound connect->disconnect->connect->disconnect, within 30 seconds space more or less. i have no idea what to do more, anyone knws the problem and a possible solution?
cheers
thanks in advance.
Click to expand...
Click to collapse
I have the same problem :crying:
Does someone know what to do?
Related
Received a brand new Ace yesterday, and immediately rooted it with super one click with no problems.
However I then tried to run the 'Galaxy Ace Unlock apk' which I'd found elsewhere.
It generated an unlock pin, but after rebooting it stuck on the Galaxy Ace flash screen. After 5 minutes I pulled the battery out, waited, then rebooted. Now it doesn't even get to the Galaxy Ace screen when switched on.
The screen backlight comes on (with a black screen) for a couple of seconds, then off, then on - but it never gets any further.
So far I've tried
- Flashing Stock Froyo via Odin
- Flashing VillainRom via Odin
In both cases the phone enters download mode, Odin completes all steps without error, but on reboot I am left with the black screen of death again!
Anything else I could try?
I have the same problem.
Have you found a solution?
zongamin said:
Received a brand new Ace yesterday, and immediately rooted it with super one click with no problems.
However I then tried to run the 'Galaxy Ace Unlock apk' which I'd found elsewhere.
It generated an unlock pin, but after rebooting it stuck on the Galaxy Ace flash screen. After 5 minutes I pulled the battery out, waited, then rebooted. Now it doesn't even get to the Galaxy Ace screen when switched on.
The screen backlight comes on (with a black screen) for a couple of seconds, then off, then on - but it never gets any further.
So far I've tried
- Flashing Stock Froyo via Odin
- Flashing VillainRom via Odin
In both cases the phone enters download mode, Odin completes all steps without error, but on reboot I am left with the black screen of death again!
Anything else I could try?
Click to expand...
Click to collapse
Hey!
Dose you RESET FACTORY SETTINGS and FORMAT CACHE in recovery, before flashing with ODIN?
CHEERS!
Did the light lit when you entered the download mode? That's the indicator.
I got the same proble, tried several firmwares with odin but, when the phone reboots it starts flashing again
Hey!
You all, try THIS one.
CHEERS!
casiocas said:
Hey!
You all, try THIS one.
CHEERS!
Click to expand...
Click to collapse
I tried it, several times with different firmwares but it doesn´t do anything. The phone, when rebooting with odin, keeps flashing the black screen
moe_szislack said:
I tried it, several times with different firmwares but it doesn´t do anything. The phone, when rebooting with odin, keeps flashing the black screen
Click to expand...
Click to collapse
Hey!
Just wanted to ask, FROM WHERE you downloaded you UNLOCK soft. Can you give me the link? PLEASE!
CHEERS!
casiocas said:
Hey!
Just wanted to ask, FROM WHERE you downloaded you UNLOCK soft. Can you give me the link? PLEASE!
CHEERS!
Click to expand...
Click to collapse
Sorry if it sound rude, it wasn´t my intention.
I download the soft form samfirmwares.com.
Cheers
moe_szislack said:
Sorry if it sound rude, it wasn´t my intention.
I download the soft form samfirmwares.com.
Cheers
Click to expand...
Click to collapse
Ok, I get. But SORRY, then I cant help. You must contact then, from where you downloaded it.
Just I hope you get fixed your phone(If you most take it to SERVICE, try to explain them that you tryed RESET FACTORY SETTINGS. It work for several ppl-s here, who must take his phone to SERVICE). Just be 10 times SURE, that you cant flash or recovery you phone, or they can do the same and see that your phone WAS ROOTED or FLASHED the CUSTOM ROM(JUST BE SURE, THEY CANT ACCESS YOU PHONE or you lose you WARRANTY).
I hope all ENDS good! Fingers crossed for you phone!!!
CHEERS!
casiocas said:
Ok, I get. But SORRY, then I cant help. You must contact then, from where you downloaded it.
Just I hope you get fixed your phone(If you most take it to SERVICE, try to explain them that you tryed RESET FACTORY SETTINGS. It work for several ppl-s here, who must take his phone to SERVICE). Just be 10 times SURE, that you cant flash or recovery you phone, or they can do the same and see that your phone WAS ROOTED or FLASHED the CUSTOM ROM(JUST BE SURE, THEY CANT ACCESS YOU PHONE or you lose you WARRANTY).
I hope all ENDS good! Fingers crossed for you phone!!!
CHEERS!
Click to expand...
Click to collapse
I forgot to say that I put a sim card (from other country) inside the ACE to check if it was unlocked.
Can it be the problem?
moe_szislack said:
I forgot to say that I put a sim card (from other country) inside the ACE to check if it was unlocked.
Can it be the problem?
Click to expand...
Click to collapse
Hey!
I want to help you, REALLY, but a bout that queation, I CANT ANSWER, RIGHT NOW. DONT KNOW EXACTLY. SORRY!
I try to find answers tomorrow(we have here 23:27). Tomorrow to work.
CHEERS!
casiocas said:
Hey!
I want to help you, REALLY, but a bout that queation, I CANT ANSWER, RIGHT NOW. DONT KNOW EXACTLY. SORRY!
I try to find answers tomorrow(we have here 23:27). Tomorrow to work.
CHEERS!
Click to expand...
Click to collapse
Ok, Thank you
Need help screen just flashes and blinks..
Tried multiple rom flashes...odin says pass but the ph doesn't boot up
Sent from my SAMSUNG-SGH-I897 using XDA App
misterio_mr111 said:
Need help screen just flashes and blinks..
Tried multiple rom flashes...odin says pass but the ph doesn't boot up
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
The same thing happens to me, Anybody has any idea?
Just send it to the service center.
No other recovery method is know.
I have been in every forum arond for this kinda brick and there is no solution for YOU to do. Also there is absolutely no way for Samsung to see either say that after the first boot the battery went dead and it never started again. It will be covered by your warranty and brand new ace! Now dont go making stupid mistakes again hope i helped
Sent from my GT-S5830 using XDA App
Apk/sim bricked my phone.
Unlock Apk also bricked my phone in the same manner.
The app generating the code is not the problem on it's own, it's when you put the "other" Sim card in and reboot that does the damage.
I got a buzz when i could still get Download Mode and Odin gave me a PASS when i reflashed, but alas the phone never rebooted and it still flashed black at me.
I'm trying everything to bring it back to life before it goes to the Service Centre and i have to give them some blag as to why it's bricked.
Other than Download Mode i can get "Emergency Dload Mode"(ARM9) & RAMDUMP.
BLZBud said:
Unlock Apk also bricked my phone in the same manner.
The app generating the code is not the problem on it's own, it's when you put the "other" Sim card in and reboot that does the damage.
I got a buzz when i could still get Download Mode and Odin gave me a PASS when i reflashed, but alas the phone never rebooted and it still flashed black at me.
I'm trying everything to bring it back to life before it goes to the Service Centre and i have to give them some blag as to why it's bricked.
Other than Download Mode i can get "Emergency Dload Mode"(ARM9) & RAMDUMP.
Click to expand...
Click to collapse
I got the same problem and still nobody has found how to unbrick the phone.
I´ll keep searching
moe_szislack said:
I got the same problem and still nobody has found how to unbrick the phone.
I´ll keep searching
Click to expand...
Click to collapse
Even Samsung don't have an easy way to repair it, hence they replace the mainboard to fix the issue.
I had 2.1 working on my Hero. When I upgraded it on it's offer, it freezed with picture 'HERO' on display. After I took battery out and started it again, it automaticly went in to booth mode. On display there is some info about the phone, than blank than RUU, and underneath that there is a picture of chip which is crossed....
What do I need to do?
Btw I'm an amateur regarding this stuff, so try to make it as simple as possible
Thanks in advance.
g.jadranko said:
I had 2.1 working on my Hero. When I upgraded it on it's offer, it freezed with picture 'HERO' on display. After I took battery out and started it again, it automaticly went in to booth mode. On display there is some info about the phone, than blank than RUU, and underneath that there is a picture of chip which is crossed....
What do I need to do?
Btw I'm an amateur regarding this stuff, so try to make it as simple as possible
Thanks in advance.
Click to expand...
Click to collapse
What is the rom u update? Some Rom must take a long time in the first rebooting. If it still be freezed about 15 minutes, wipe all and try another rom.
Yukikaze_nuce said:
What is the rom u update? Some Rom must take a long time in the first rebooting. If it still be freezed about 15 minutes, wipe all and try another rom.
Click to expand...
Click to collapse
ok, but how will I do it if the computer doesn't recognize my device (hero)?
A guy told me that I first need to program it in BIOS than flash it. Also don't know how to do it if my computer doesn't recognize it...
Btw. Thx for the reply
Okay so my phone randomly rebooted 2 days ago and when it got to the LG logo screen it froze. I tried to hard reset it, i went in to the hard reset menu clicked yes once then confirmed the hard reset by selecting yes a second time and the phone froze on highlighted yes. I have pulled the battery and tried to do this multiple times to no avail. So next i went to my PC and started google searches. Often i found things such as being stuck in boot loop which my phone wasn't, it was just frozen at the LG logo screen. Regardless I like to think of myself as self educated tech savvy (which now from reading all of your posts im not, im not even a little bit, in fact im tech stupid.) I did follow post through to the LGUP tool and downloaded a stock KDZ and got my phone into download mode>firmware update screen, i was able to get al the correct drivers and get LGUP to recognize the device and i loaded the stock KDZ and tried to do a Complete wipe reinstall. The program as able to interact with my device and went through the process, i thought i had fixed my phone. After a fresh install(or what i thought was a fresh install) i rebooted after the update and went to the LG logo screen and froze. The only difference is now when my phone starts, right before the LG logo appears i get the green android robot with what looks like open working "guts" real quick before it goes to the Logo and freezes. So back to the drawing board and i wanted to attempt some of the things ive seen like TWRP recovery etc but here i am getting lost. Forgive me if im posting things that have been answered but i keep getting confused. I dont know what the difference is between fastboot boot loader recovery mode or any of that is. also i kept noticing time and time again that my phone has to be in USB debugging mode and i dont know if it is. I cant turn my phone on to get it into USB debugging mode now anyways. Im okay with my warranty being voided and im okay with rooting if thats what i have to do to make it work. I have installed ADB and fastboot and some twrp recoveries etc but im clueless. Lastly know that i never Rooted my phone or anything but i was a torrent downloader. forgive me im triyng to provide as much information as possible.
PLEASE NOTE - I had to sign up to post here obviously and i loved how it said if you have an IOS go buy an android and come back LOL
Message Tung Kick. He can get u out of anything
Hit thnx if this helpd
tried
joshualuna said:
Message Tung Kick. He can get u out of anything
Hit thnx if this helpd
Click to expand...
Click to collapse
i tried to message tung kick and it said user not found?
sjeffreysmith said:
i tried to message tung kick and it said user not found?
Click to expand...
Click to collapse
Use Messenger on FB
i appreciate the resonse
joshualuna said:
Use Messenger on FB
Click to expand...
Click to collapse
is that the name to search for on fb? "tung kick"
sjeffreysmith said:
is that the name to search for on fb? "tung kick"
Click to expand...
Click to collapse
Try again on here but lower case and name is one whole wrd. tungkick
joshualuna said:
Try again on here but lower case and name is one whole wrd. tungkick
Click to expand...
Click to collapse
not having luck with him yet but ill keep trying. is there any other posts or something you could point me towards?
sjeffreysmith said:
not having luck with him yet but ill keep trying. is there any other posts or something you could point me towards?
Click to expand...
Click to collapse
http://forum.xda-developers.com/tmobile-lg-v10/development/debrick-phone-h901-qualcomm-9008-t3440359
This thread by him may help.
jsu718 said:
http://forum.xda-developers.com/tmobile-lg-v10/development/debrick-phone-h901-qualcomm-9008-t3440359
This thread by him may help.
Click to expand...
Click to collapse
SD card my only option?
I got a P9000 in the late spring, and have been really happy with it. Unfortunately I dropped it on the ground, and the screen cracked, after which the touch function did not work (but the phone did) I finally managed to get a new screen from China, and it has been installed by a local shop dealing with mobiles. However, the shop told me they could/would not deal with anything else but changing the LCD screen. The phone switches on (I can hear starting jingles and emails downloading etc) but the screen just turns from black to dark blue and stays that way. I have been trawling through the forums, but not sure what to do next. Take it that I need to flash it, and have followed the instructions given here, but it just seems to time out. Anyone got the patience to walk me through this?
UKrugger said:
I got a P9000 in the late spring, and have been really happy with it. Unfortunately I dropped it on the ground, and the screen cracked, after which the touch function did not work (but the phone did) I finally managed to get a new screen from China, and it has been installed by a local shop dealing with mobiles. However, the shop told me they could/would not deal with anything else but changing the LCD screen. The phone switches on (I can hear starting jingles and emails downloading etc) but the screen just turns from black to dark blue and stays that way. I have been trawling through the forums, but not sure what to do next. Take it that I need to flash it, and have followed the instructions given here, but it just seems to time out. Anyone got the patience to walk me through this?
Click to expand...
Click to collapse
I am facing same thing here. The screen is not coming up at all, But I can hear sound too. ANyone else who has changed the screen successfully before?
yes, i changed the screen successfully. After screen replacement i flashed the newest rom with flashtools and all was ok.
DonMagnifico said:
yes, i changed the screen successfully. After screen replacement i flashed the newest rom with flashtools and all was ok.
Click to expand...
Click to collapse
Can you describe the precise process you followed. I seem to get stuck when I try to flash the phone
UKrugger said:
Can you describe the precise process you followed. I seem to get stuck when I try to flash the phone
Click to expand...
Click to collapse
skeleton1911 describe in this thread how to flash the P9000:
http://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
in this thread from skeleton1911 you find all links to the needed files:
http://forum.xda-developers.com/showpost.php?p=66784596&postcount=146
change screen start logo screen after light on/off all the time 2sec
DonMagnifico said:
skeleton1911 describe in this thread how to flash the P9000:
http://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
in this thread from skeleton1911 you find all links to the needed files:
http://forum.xda-developers.com/showpost.php?p=66784596&postcount=146
Click to expand...
Click to collapse
hello, thank you for you help. i've change the screen p9000 and when i put battery the screen logo elephone turns on and turns off two second always.is it normal and is it essential new flash when you put a new screen. in periph manager i see two second USB Vcom MT 65xx preloader but it's disapear 2seconde all the time because logo elephone light on and off two second. If you give me a solution, you are the best.
the pc don't recognize telephone of course. but i'm tm trying your methode but i've meet difficult with install pilot.
thank you XDA
thank you to help me, all the day i'm trying solutions,after the screen change, Flashtool tell sucess download, but it continues to turn on and off with the logo elephone starts. in peripheral it appears and disappears every two seconds. i don't know if there is a room in my phone. how to inject the files in the phone with a Peripheric always on and off. help me please. after flashtool ok download the screenis black and nothing i move battery and after logo elephone on/off but nothing else. someone know the reason on/off and appear an desappear in device : Mt65xx USBVCOM.
tanguy66 said:
hello, thank you for you help. i've change the screen p9000 and when i put battery the screen logo elephone turns on and turns off two second always.is it normal and is it essential new flash when you put a new screen. in periph manager i see two second USB Vcom MT 65xx preloader but it's disapear 2seconde all the time because logo elephone light on and off two second. If you give me a solution, you are the best.
the pc don't recognize telephone of course. but i'm tm trying your methode but i've meet difficult with install pilot.
thank you XDA
Click to expand...
Click to collapse
You are in a boot loop. This is not a bad sign, now you know the screen works. It's normal that you have to flash the Rom again after replacing the screen. if you use flashtool, start download in flashtools before you connect your phone to the PC, then hold vol+ on your P9000 and connect the phone to the pc.
DonMagnifico said:
You are in a boot loop. This is not a bad sign, now you know the screen works. It's normal that you have to flash the Rom again after replacing the screen. if you use flashtool, start download in flashtools before you connect your phone to the PC, then hold vol+ on your P9000 and connect the phone to the pc.
Click to expand...
Click to collapse
always the same problem: light on off all 2 seconds, with B+vol+ i see recovery 1 seconde. i haven't the time to do something. question is it possible the battery bad, the logo flash all the time if the battery bad the logo don't go isn't it. please help i'm trying plenty solution but no good . thank you.
tanguy66 said:
always the same problem: light on off all 2 seconds, with B+vol+ i see recovery 1 seconde. i haven't the time to do something. question is it possible the battery bad, the logo flash all the time if the battery bad the logo don't go isn't it. please help i'm trying plenty solution but no good . thank you.
Click to expand...
Click to collapse
no, it's not the battery. You made a mistake by flashing the rom, now you are in a boot loop. Ignore the message on the screen. Try to flash the rom again. start flashtool, select the scattertext, click download, hold vol+ button on the phone and connect the phone to the PC
PLEASE HELP me, can you give me a solution to start up the phone again
hello , before flash tool all is ok flashing GOOD, now it's more bad now i have no lignt no logo, and when use flash tool always stop download 20% BROM error: status dowwnload exeption (0xc0050003) (HINT) : , i don't know if i have a good battery
yesterday i have a new image appears it'a big beautiful battery only one bar after logo several times. i'm found an d try all solutions, 4 days , i sleep at 1 oclock. help to find a solution. how to know or test if the telephone is dead or little life.
OK now i arrived with flash tool i begin all zero, and message OK Good, i'm verry worried, no light , no logo??have you a solution to know if the battery now? thank you help.
do you know when the message tell OK,it means all things an room is now ok in the phone. I'm not sure
just now i'm testing battery with tester 3v 1ma it's good. how to do to light screen now. it's strange.
and with electric power it must work normaly ,or not if the battery dead?
i think you flashef the wrong preloader. flash the phone again with the newest firmware. in #5 you find a link to the needed files.
DonMagnifico said:
skeleton1911 describe in this thread how to flash the P9000:
http://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
in this thread from skeleton1911 you find all links to the needed files:
http://forum.xda-developers.com/showpost.php?p=66784596&postcount=146
Click to expand...
Click to collapse
After a couple of tries, I did manage to get this working. Initial failure seemed to be me not pressing the "Vol +" button. Thanks very much for your help
DonMagnifico said:
i think you flashef the wrong preloader. flash the phone again with the newest firmware. in #5 you find a link to the needed files.
Click to expand...
Click to collapse
thank you. i use flash tool v5.1620. i have windows 7 32 bit,mtk 65 vcom is update, i'm not sure what do you mean. newest firmware. i have last room for p9000. can you tell more details please or more link to succeed. i read, and i trying a lot, now i swimming again.
UKrugger said:
After a couple of tries, I did manage to get this working. Initial failure seemed to be me not pressing the "Vol +" button. Thanks very much for your help
Click to expand...
Click to collapse
ok , i don't understand with flash tool i have plenty of time a big download is ok, if the download is ok why it's doesn't working.
the phone is often remains dark. I put in charge the battery with two 2mn special machine at my work , and it's wake up the phone souddenly appears again the elephone logo and battery with 1 once bar, I don't know if it's me or the battery or something else. normally if I plug in USB i must have lignt Electric power? but nothing.
thank you and not let me down please i need you.
tanguy66 said:
ok , i don't understand with flash tool i have plenty of time a big download is ok, if the download is ok why it's doesn't working.
the phone is often remains dark. I put in charge the battery with two 2mn special machine at my work , and it's wake up the phone souddenly appears again the elephone logo and battery with 1 once bar, I don't know if it's me or the battery or something else. normally if I plug in USB i must have lignt Electric power? but nothing.
thank you and not let me down please i need you.
Click to expand...
Click to collapse
Sorry, I can' t help you more. All I know i telled you. But write a private message to skeleton1911, he has a great experience in reactivating Phones. May be he can help you.
P9000 screen replacement
Hi . I had my p9000 about 2 months when I sat on it and cracked the screen,the casing was very slightly curved so I gave it to a shop to repair,now nearly 2 months later they say they can't get it to start up. They tried a new battery and I told them what I'd read on this forum regarding flahing the rom but They gave me back the phone with a new screen and nothing else, so I told them i'm not paying for 1/2 a repair and told them to remove the new screen and give me back the phone as it was . What do you think could be the problem if a repair shop cannot repair a screen and install new sorftware is there hope for it?
Hi, i broked my screen again so i am not a newbie about this... but this time after flashing the Phone show nothing at all... the small LED Dot is shining when android is boot, so i dont think the cable is connected wrong. The touch works fine..What can it be??
My phone turned off a few days ago and it's now in a bootloop, I've tried a lot of things, without any positive results.
When I try to get into download mode it appears for only a few seconds and then it enters in the bootloop again.
The only thing I have access to is to the fastboot mode but i don't know if I can do something useful with it.
Can anyone help me please?
Sorry if my english isn't good enough btw, i'm from Chile.
Thanks.
gatomew said:
My phone turned off a few days ago and it's now in a bootloop, I've tried a lot of things, without any positive results.
When I try to get into download mode it appears for only a few seconds and then it enters in the bootloop again.
The only thing I have access to is to the fastboot mode but i don't know if I can do something useful with it.
Can anyone help me please?
Sorry if my english isn't good enough btw, i'm from Chile.
Thanks.
Click to expand...
Click to collapse
You said you've tried a lot of things, care to list? In order to help you better.
Nick216ohio said:
You said you've tried a lot of things, care to list? In order to help you better.
Click to expand...
Click to collapse
Well, I tried the common things... LG UP doesn't detect the phone because the download mode restarts after a few seconds. In fastboot I tried to patch a new sofware with some guides in this forums, but I realized that the bootloader was locked so nothing happened.
gatomew said:
Well, I tried the common things... LG UP doesn't detect the phone because the download mode restarts after a few seconds. In fastboot I tried to patch a new sofware with some guides in this forums, but I realized that the bootloader was locked so nothing happened.
Click to expand...
Click to collapse
You try different battery? I know you said it boot loops but you can't get into factory reset button combo?
Nick216ohio said:
You try different battery? I know you said it boot loops but you can't get into factory reset button combo?
Click to expand...
Click to collapse
I tried a different battery too and it was the same. I also tried the factory reset and it didn't work
I have some problem. My g5 booting every second, I tried to factory reset but nothing happen.. I've go to LG service center, they said I must change motherboard..please help if any option. Thx