MICROMAX CANVAS NITRO A311 STOCK ROM
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/[/CODE]
Instructions:.
Go to recovery mode
select Wipe
wipe dalvik cache
wipe system
wipe data
then go back to main menu
select install
select use external sd card
select rom
and reboot
and ENJOY
Download link
uploading
NOTE:
I have used aroma installer from Hive UI team's installer therefore it will ask you to install a few apps
do not install them just simply install the rom
also in the end it may say that setting perm failed
but do not worry that has no effects on rom or installation
XDA:DevDB Information
MICROMAX CANVAS NITRO A311 STOCK ROM, ROM for the Micromax Canvas Nitro A310/A311
Contributors
yogesh.kalyana
ROM OS Version: 4.4.x KitKat
Version Information
Status: Stable
Created 2015-08-31
Last Updated 2015-08-30
Reserved
Reserved
yogesh.kalyana said:
MICROMAX CANVAS NITRO A311 STOCK ROM
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/[/CODE]
Instructions:.
Go to recovery mode
select Wipe
wipe dalvik cache
wipe system
wipe data
then go back to main menu
select install
select use external sd card
select rom
and reboot
and ENJOY
Download link
uploading
NOTE:
I have used aroma installer from Hive UI team's installer therefore it will ask you to install a few apps
do not install them just simply install the rom
also in the end it may say that setting perm failed
but do not worry that has no effects on rom or installation
XDA:DevDB Information
MICROMAX CANVAS NITRO A311 STOCK ROM, ROM for the Micromax Canvas Nitro A310/A311
Contributors
yogesh.kalyana
ROM OS Version: 4.4.x KitKat
Version Information
Status: Stable
Created 2015-08-31
Last Updated 2015-08-30
Click to expand...
Click to collapse
Why bother making a thread when you can't upload the ROM? Useless
Reported.
Thread closed
Placeholders are not allowed
Please do not make threads until you have a download link ready
Thanks
Related
I am not responsible for any damages for your device , by flashing this rom you will accept all the damages...
Click to expand...
Click to collapse
Downloads : http://www.mediafire.com/download/eknen45ixclcibv/CM11_v1_1.zip
As roms for recovery to do the three wipe. The roms before posting are tested in the Xiaomi Note
How to flash:
* First have TWRP or CWM installed (TWRP recommended).
* Take nadroid backup
* Flash above rom, and optionally gapps.
*wipe cache and dalvik
* Reboot and enjoy
Any one who could make an installation video will be saluted....
plz report bugs
Device tree and vendor files will be provided soon
cm 11 initial build will be provided.... soon
sai dev said:
Regular builds for this mod will be provided to you ...
As roms for recovery to do the three wipe. The roms before posting are tested in the Xiaomi Note
How to flash:
* First have TWRP or CWM installed (TWRP recommended).
* Take nadroid backup
* Flash above rom, and optionally gapps.
*wipe cache and dalvik
* Reboot and enjoy
Any one who could make an installation video will be saluted....
Click to expand...
Click to collapse
Just a heads up guys "As stated in OP Regular builds wont be provided. This rom is made by some chinese guy
Stock android 4.4? or based off 4.2?
Mrbababo said:
Stock android 4.4? or based off 4.2?
Click to expand...
Click to collapse
4.2 of course since no kernel source of redmi note has been released, yet!
This rom is CM 10 based on 4.2.2 , Not CM11 But everything is working smooth and fine
Thanks for putting the link, but as its based on CM10, can someone please post Screenshots and Details, before people start flashing it.
I would like to Have CM 11 on my Redmi Note, but can live with CM10 too, but without more details, I would be little hesitant to flash it.
MIUI Forums state, Redmi 1S will have its kernel source by December End, so we can hope Kernel source for Redmi Note should also come bundled as only specific Q1-2015 date for kernel source is mentioned about Mi-3.
Thread closed.
No kernel Source code.
Android M
About Inspired 6
Android 6 inspired rom
De-odexed
Pac**** tweaks added
Dolby Atmos
Android M Platlogo
Android M bootanimation
Android M Launcher
dGreat Music Plus added
Dynamic Staturbar on Display settings
Developer Settings:
* Engineer mode
* Top notification
* Power menu
* Network traffic
* Battery styles
Credit me & vishwaRjeet
Maximum Dev/Port Team
Maximum Dev/Port Team Chat Group
SKK Lynx United Admins Chat Group
SKK Lynx United Octa Group
Fuze Q390 Groups
FMD – Scripts
1https://mega.nz/#!T8hSlSKQ!CW9juVinInG6Fv9w0t9iKHx_tuaSRYOveIn0Qn5rVxE
2https://mega.nz/#!7oYyjIDK!OJNVa5dA309LvJO9WMq3Vitx-YQAJQds-oIHiJTZkqc
3https://mega.nz/#!rtQgiQjL!UuQS19mKc2oUrWcpYRvgieiQbJJHDQZKUEllMXJo25Y
4https://mega.nz/#!TxhxHI7B!6ywFXsxe2qmthsWwZW-Zvnwpq9y8j17BYNQTPOdLarc
5https://mega.nz/#!24Jzna4Z!jfEQm6kJ7A5g3760grpDLk8zO_TcBxNRwyTFU0iR9k0
6https://mega.nz/#!y9BxjTQD!FtsD8zAHpP7NmCHUUsbDD3x0DrolL_-d0y22xM4RiAs
[ROM download link]
https://drive.google.com/file/d/0BwbnrTaT94IHd2oycEJUbVE1YU0/view?pli=1
Root link
https://drive.google.com/file/d/0BwbnrTaT94IHWW4taHhmTjNFLTg/view?pli=1
Medium sound patch
Flash this for sound fix. http://d-h.st/PtqI
How to install:
* Boot into custom recovery
* Look for the zip file
* Flash…
* Wait til finish
* Done
* Reboot device..
* Enjoy
Guys thank you very much providing such cool ROMs and with only 1-2 bugs atmost thank you very much.
But the ui is not smooth like cm 12 lollipop and it is not for a310
Can someone please upload some screenshots? Thanks in advance
---------- Post added 01-10-2015 at 00:18 ---------- Previous post was 30-09-2015 at 23:44 ----------
You have posted this in the wrong place. It should be in the android development thread.
Awesome Work Kishan Bro...
bugs?
What is working and not working?
Even lollipop still has bugs & not completely gone, so can you please mention the bugs remaining?
Thank you for your effort you put in to this ROM.
I am new so dev
Hey can anyone provide volume patch for i phone rom for a310 and htc 820+ rom for a310?
unfortunately android.process.acore has stopped
Not for A310
girijad40 said:
But the ui is not smooth like cm 12 lollipop and it is not for a310
Click to expand...
Click to collapse
Yes, this ROM is not for A310 and this is not known until you start to flash it. Wish it was indicated on the file itself.
Tried it on A310. MAC address is not stable, changing with each reboot, therefore cannot connect to WiFi. Networking stopped working after sometime. Google Store stops working and cannot be revived.
All apps on the Google store are not compatible with M6. Some crash after installation.
Maybe developers can throw in a compatible GAPPS? And give us a ROM suited for A310?
Thanks in advance.
IS it not for A310?
can i flash this ANDROID M ROM on my A310 or not?
This Rom works on Nitro A310
Thanks buddy, i tried this rom on my Micromax Nitro A310 and its works smoothly. There is no lag as mentioned in one of the comment.
I followed below steps.
1. Clean all files of previous OS.
2. Then I flash "UPDATE-SuperSU-v2.14.zip"
3. And then i flash the rom "android M 6.0.1 for nitro by krishan & vishwaRjeet.zip"
4. That's It done.
Hope this will help someone
Yes, you can give a try on your risk as i did.
Alexlee049 said:
can i flash this ANDROID M ROM on my A310 or not?
Click to expand...
Click to collapse
Yes, you can give a try as i did. Follow the steps i mentioned (#12). Disclaimer: Do it at your own risk
can anyone post screenshot of 6.0 rom
Alexlee049 said:
can i flash this ANDROID M ROM on my A310 or not?
Click to expand...
Click to collapse
I tried this sequence and installed the ROM on my A310 a second time.
I confirm that on my A310:
1) MAC address changes every time A310 reboots, which makes it difficult to connect to my Wi-Fi router.
2) The rear camera resolution is stuck at 5MP max (A310 has a 13MP rear camera).
3) Up volume button does not work.
Apart from the above, the ROM is working fine on A310.
Khanrehaan said:
Thanks buddy, i tried this rom on my Micromax Nitro A310 and its works smoothly. There is no lag as mentioned in one of the comment.
I followed below steps.
1. Clean all files of previous OS.
2. Then I flash "UPDATE-SuperSU-v2.14.zip"
3. And then i flash the rom "android M 6.0.1 for nitro by krishan & vishwaRjeet.zip"
4. That's It done.
Hope this will help someone
Click to expand...
Click to collapse
How do you clean all files of previous OS?
ninadajbe said:
How do you clean all files of previous OS?
Click to expand...
Click to collapse
By wipping/clearing data and dalvik cache in custom recovery
I am not able to flash this sound fix patch for my mobile MICROMAX CANVAS NITRO A311..........
Help me to do.......
Otherwise give a new sound fix patch for canvas nitro A311
Hey Bro,
Please Provide Gapps for this ROM as "GOOGLE APP continuously STOPS"
Provide Gapps for this ROM as GOOGLE APP continuously STOPS
Please Provide Gapps for this ROM as "GOOGLE APP continuously STOPS"
It shows error that "unfortunately, google app has stopped"
and this goes on continuously....
This Rom is created by Abbu Qaffar...I am posting on his behalf...
#Disclaimer
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards , ...
Please do some research if you have any concerns about Custom Build Roms before flashing it!
Supported devices
Galaxy J7 Prime SM-G610F
FEATURES
1. based on stock G610FDDU1APK1 firmware
2. Deodexed
3. Pre-Rooted
4. Busybox Included
INSTRUCTIONS
1. Boot to TWRP
2. Perform A full Wipe Including System,DATA,CACHE,etc.
3. Flash This Rom and Reboot
DownloadsROM LINK
Credits
Samsung
Abbu Qaffar {Creator}
Thanks varun it's me ??
any chance to make a deodexed rom for G610M?
Please update deodex acq4
please update base AQC4, thank you!
Yes I have done updates deodex with a version of AQC4 I mixed with of the kernel long that doesn’t happen bugs in brightnes..
Up please sir update aqc4 thnks
Varun hellboy said:
This Rom is created by Abbu Qaffar...I am posting on his behalf...
#Disclaimer
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards , ...
Please do some research if you have any concerns about Custom Build Roms before flashing it!
Supported devices
Galaxy J7 Prime SM-G610F
FEATURES
1. based on stock G610FDDU1APK1 firmware
2. Deodexed
3. Pre-Rooted
4. Busybox Included
INSTRUCTIONS
1. Boot to TWRP
2. Perform A full Wipe Including System,DATA,CACHE,etc.
3. Flash This Rom and Reboot
DownloadsROM LINK
Credits
Samsung
Abbu Qaffar {Creator}
Click to expand...
Click to collapse
I request you to post your thread here :- Link
https://forum.xda-developers.com/t/galaxy-j7-prime
:good::good:
Kernel 3.18.19 for TCL 5015/5016/A/X/D/E
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired. Please
* do some research if you have any concerns about features included in this Recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Working features:
Rear camera OV5670_MIPI_RAW, OV5670FF_MIPI_RAW
Front camera GC2355_MIPI_RAW, OV5670_FRONT_MIPI_RAW
LENS (autofocus)
RIL (2 sim works)
Mobile Data 3G
USSD
WIFI
Bluetooth
Sound
Microphone
Touchscreen (all revisions)
Navigation buttons
Vibration
Keypad Volume + and Volume -
Charging
MTP
Google Services
Accelerometer BMA222
Headphones
ALSPS (light and move sensor)
LED
Flashlight
LCD buttons Backlight
Bugs:
No
Source code:
Github repository
ROMS in theme on 4PDA
Credits:
Guys from 4PDA:
Skyrimus - for kernel building
rek777013 - for testing and ROM porting
Download latest kernel and libs for focus and cameras:
Release on Github
hey bro, could you build a 3.18.19 kernel for the alcatel 5025? Please
DoesntAlp said:
hey bro, could you build a 3.18.19 kernel for the alcatel 5025? Please
Click to expand...
Click to collapse
Ok, i'll do it, just wait
DoesntAlp said:
hey bro, could you build a 3.18.19 kernel for the alcatel 5025? Please
Click to expand...
Click to collapse
Work in progress on 4PDA
Skyrimus, When I port a Marshmallow or Nougat ROM, in my Alcatel 5015A, the camera doesn`t work. Can you give me any solution?. Thanks in advance
Juanliz2012 said:
Skyrimus, When I port a Marshmallow or Nougat ROM, in my Alcatel 5015A, the camera doesn`t work. Can you give me any solution?. Thanks in advance
Click to expand...
Click to collapse
Plz wait, testing in progress, all compile.
New kernel 3.18.35 for Nougat without bugs see here https://forum.xda-developers.com/android/general/pixi3-5-alcatel-one-touch-pop-35-kernel-t3780132
On week i will fix LENS and Cameras for 3.18.19
Skyrimus said:
Plz wait, testing in progress, all compile.
Click to expand...
Click to collapse
Thanks for your great job
Anything on the 3.4.5 kernel for pop c2 4032 , pop c3 4033 on JB or KK roms mate ?
Do i need to upgrade Android Version to 6.0 in order for me to install this kernel or
i just flash the kernel directly via TWRP Recovery?
WARNING!
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
How to install TWRP
---Requirements---
Computer
lg g2 mini
micro usb cable
brain
---Requirements---
1. ROOT your device [Method is in ROOT category]
2. Unlock your bootloader [Method is in bootloader unlock category]
3. flash recovery using Rashr [Download Rashr]
4. after flashing recovery click reboot to recovery
5. DONE
RECOVERIES
TWRP 3.0.1, 3.0.2 - (orginal thread) (download)
TWRP 3.1.1 - (orginal thread) (download)
Firmwares
D620r lolipop 20b - (download)
D620r kitkat 10g - (download)
D618 kitkat 10a - (download)
D620 lolipop 20d - (download)
ROOT
Kingoroot - Works on kitkat and lolipop
Towelroot - tested on d618
ROMS
[ROM][6.0.1_r78][FINAL] Resurrection Remix - THREAD - DOWNLOAD - MIRROR[ROM]crDroidAndroid [v3.8.5] [nougat7.1.2] 20180208 - THREAD - DOWNLOAD (Decrypt Key is in thread)[ROM] [ALPHA] [8.1] [Unofficial] LineageOS 15.1 - THREAD - DOWNLOAD
Resurrection Remix 5.8.5 (Android 7.1.2) - THREAD - DOWNLOAD
[OFFICIAL] [Android 7.1] Resurrection Remix v5.8.0 - THREAD - DOWNLOAD
CyanogenMod 14.1[ALPHA] - THREAD - DOWNLOAD
[ROM][5.0.2] DroidMaster (final version 20161211) - THREAD - DOWNLOAD[ROM][5.1.1][D620r] Modified CM 12.1 - THREAD - DOWNLOAD
Unlocking bootloader
Replacing aboot.bin lolipop All Models - THREAD
Replacing aboot.bin kitkat ONLY D620R - THREAD
Kernels
-v- Kernel X - thread
Flashtools
LG FLASH TOOL 2014 - DOWNLOAD
LGUP - DOWNLOAD
Added -V- Kernel X
Added new root method
i have both stock roms of LG G2 Mini what i need to do to flash without any error
LG UP said unknown model sometimes and other flash tools says error to the server and sometimes stuck.
P.S. if i post in a wrong topic you can move it anyways
AlinTecsan said:
i have both stock roms of LG G2 Mini what i need to do to flash without any error
LG UP said unknown model sometimes and other flash tools says error to the server and sometimes stuck.
P.S. if i post in a wrong topic you can move it anyways
Click to expand...
Click to collapse
I never know how to fix it... Did you installed drivers?
Zordon.xyz said:
I never know how to fix it... Did you installed drivers?
Click to expand...
Click to collapse
drivers LG are installed they detected as LGE Modem Serial COM Port
THX bro you saved my ass
Lisu_81 said:
THX bro you saved my ass
Click to expand...
Click to collapse
No problem bro