THIS kernel is for N910F
here's a kernel, compiled from N910F sources XXU1COI3, with XXU1COI3 Ramdisk
It has a single modification, in order to boot the 910F with root, in new firmware 5.1.1.
Everything else is a stock kernel.
Fixed the warning "kernel is not seandroid enforcing" on boot
my advice is, flash this kernel, and next, root your phone with your preferred method
enjoy:
Mod edit: No longer supported, link removed.
flash it in recovery
To install Root:
patensas said:
All i did was:
- flash the rom with odin
- flashed TWRP 2.8.7.0 with odin
- flashed kernel with TWRP
On exit from TWRP i got no root notification and i selected to apply root.
That was all that needed to be done on my device to gain root.
Click to expand...
Click to collapse
About warning "Notice Security":
lonegan said:
As you now have root access, you can install Titanium Backup and freeze SecurityLogAgent service to get rid of that message.
Click to expand...
Click to collapse
Sources (Updated 8/10/15):
http://www.mediafire.com/download/erb72lq6rsp0rlt/inicial_comit_2.zip
Merge the files in zip above with Samsung sources and compile it
Works.. nice one.. cheers
Well done
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
root with what??
i flash this ok no problem.....but root didnt work
i used same as i used with lolipop 5...which was..... CF-Auto-Root-trlte-trltexx-smn910f.tar
thanks i am in bootloop now...need help
edwardob said:
i flash this ok no problem.....but root didnt work
i used same as i used with lolipop 5...which was..... CF-Auto-Root-trlte-trltexx-smn910f.tar
thanks i am in bootloop now...need help
Click to expand...
Click to collapse
The auto root option doesn`t work on 5.1.1
Best thing to do seems to be flashing latest TWRP, flash the kernel within TWRP and use the root option that TWRP offers.
root option
my version 2.8.5 doesnt have root option
edwardob said:
my version 2.8.5 doesnt have root option
Click to expand...
Click to collapse
All i did was:
- flash the rom with odin
- flashed TWRP 2.8.7.0 with odin
- flashed kernel with TWRP
On exit from TWRP i got no root notification and i selected to apply root.
That was all that needed to be done on my device to gain root.
edwardob said:
my version 2.8.5 doesnt have root option
Click to expand...
Click to collapse
Just flash this kernel using TWRP and then SuperSU beta 2.49 (also using TWRP or other custom recovery)
http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
BTW. Good work @zamcum, thanks!
Later EDIT:
Or use @patensas's method described above
thanks for all the help
looks like i have install room again ...then twrp then the zip file in twrp.....that right?
im in a boot loop
- Install TWRP 2.8.7.0 with Odin
- Flash within TWRP the Kernel (ZIP) posted in this thread
- Restart TWRP and will ask you to install SuperSU, install it
- After restart run SuperSU, will ask to update SuperSU from market, install, update binaries
At last i'm on my domain with root...
Thank you for your work zamcum
thanks again
i dowloaded zip but it was ccorrupted......install ok the second time ....thats what the problem was thanks
yeah I'm getting file corrupted too when flashing..downloaded twice
Sorry for the douch question but where can i get the 5.1 Rom?
d4rk1337 said:
Sorry for the douch question but where can i get the 5.1 Rom?
Click to expand...
Click to collapse
Sammobile or Samsung live blog
---------- Post added at 07:49 AM ---------- Previous post was at 07:47 AM ----------
There is a pretty amazing kernel from the Echoe rom people. Sign up to the forum to get access. I tried the above method but even after TWRP 'rooted' the rom, supersu wasn't able to function. Downloaded from playstore and then all was right.
security warning
how are you guys dealing with constant security warning... since update
edwardob said:
how are you guys dealing with constant security warning... since update
Click to expand...
Click to collapse
+2 on that one. Tried freezing everything Knox related. Still get that anoying warning...
Sent from my SM-N910F using Tapatalk
Reb0rn said:
+2 on that one. Tried freezing everything Knox related. Still get that anoying warning...
Sent from my SM-N910F using Tapatalk
Click to expand...
Click to collapse
As you now have root access, you can install Titanium Backup and freeze SecurityLogAgent service to get rid of that message.
Hi guys..
Installed rom with 5.1.1, by using a PIT file by 3 Italia. Now i want to root.
Trying to install the twrp within Odin, but after one seconds of upload the program is in block.
Also need the PIT file when install a recovery??
great stuff
@zamcum, nice work!!!
Thank you my friend!!!
Related
Pre-Rooted Stock Firmware
Goodevening everybody,
Many of us love root but want to stay stock (like me) well. By following this guide: link ©quetzalcoatl2435. I was able to pre-root Stock Central Europe 1.
This thread is made with only one purpose: To share it!
If you want me to make one of your own choosing (branded, unbranded, generic etc) give me a call + download link for your ftf file and I'm good to go. Or follow the guide I linked to!
Details of all the pre-rooted ROMS I've made:
Fully stock
No bloatware removed or added (you can do this yourself now)
Still Odex
No CWM after flashing but you should be able to install it again
REQUIREMENTS
CWM (downgrade to 4.1.2 root it and install CWM)
This SU zip Link
This Kernel File Link
Flashtool
Patience
STEPS:
Download the .zip file (see downloads)
Put the pre rooted firmware + SU zip into your internal SD
Flash both files and turn the phone off
Open flashtool into flashmode
Flash 266 kernel
Reboot device
Done
If you want to have a custom Recovery you could try to flash the following zip:
- Download: Dev Host
DOWNLOADS
Stock FirmWare CE 1 Pre-Rooted
- Download: Google Drive
Stock FirmWare Global Pre-Rooted
- Download: Google Drive
Stock Firmware Generic IN Pre Rooted (C5302)
- Download: Google Drive
SCREENS:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you due to any reason want to go back to fully Stock without root and the lose of data:
Flash Stock ROM via Flashtool but uncheck DATA at WIPE this will keep your installed applications etc
~Credits:
Many thanks to quetzalcoatl2435 for his amazing guide
dssmex for the recovery zip
Chainfire for the SU
Sony for the firmware
Google for Android
Me for rooting and sharing (bit selfish not to put my own name here :angel: )
Thanks
I share Central Europe 1 .266
Mirrors will come in handy.. As Google Drive is slow and I dont have or use mediafire/devhost.
Has someone bootlop? I have "SONY" again and again...
No it is running fine here. You did flash the kernel after flashing the rom itself?
Yes i did. I followed the instriction. I'll try once again tomorrow. How log Xperia is starting after flash? Maybe I waited too short. I have logo SONY which is dissapearing and showing again.
Well it is weird actually since I have it fully booting etc.
You can try a few things:
- Redownload and reflash
- Reflash
- update to 266 downgrade and try again
Finaly i flashed rom. Everything was allright until I try use titanum backup.IT says theres no root access. I checked supersu (the same about no root) and root checker. I Think root dissapeared after flash 266 kernel only. I have no idea, IT is to much for me.
Everything works fine, SU too. Thanks.
wipe?
Do I have to wipe anything prior to installing?
---------- Post added at 08:38 AM ---------- Previous post was at 08:22 AM ----------
I have done everything according to the OP.
I don't have root after all. Titanium Backup says that and I have no SuperSU either.
Weird...
Any idea?
moolash said:
Do I have to wipe anything prior to installing?
---------- Post added at 08:38 AM ---------- Previous post was at 08:22 AM ----------
I have done everything according to the OP.
I don't have root after all. Titanium Backup says that and I have no SuperSU either.
Weird...
Any idea?
Click to expand...
Click to collapse
well done
good for a base
dipesh1502 said:
well done
good for a base
Click to expand...
Click to collapse
What do you mean? I don't get it
You flashed the Su zip? Because the program and a few needed files are in there If not then you have to start over since CWM is removed after installing the ROM.
mrjraider said:
You flashed the Su zip? Because the program and a few needed files are in there If not then you have to start over since CWM is removed after installing the ROM.
Click to expand...
Click to collapse
Yes, I have. I flashed the ROM, then SU.zip, power off, flash .266 kernel only.
Reboot. All is fine, except for no root.
To be honest, I am already back to the CWM backup of 4.1.2 with root and CWM and bloat removed.
Your job is appreciated, though.
moolash said:
Yes, I have. I flashed the ROM, then SU.zip, power off, flash .266 kernel only.
Reboot. All is fine, except for no root.
To be honest, I am already back to the CWM backup of 4.1.2 with root and CWM and bloat removed.
Your job is appreciated, though.
Click to expand...
Click to collapse
Haha, thanks!
I just dont know why you cant get it to work
Thanks. everything works
You're welcome
Is it ok to flash directly from Existenz 2.1.5 which is based .266? or Do i really need to downgrade to 4.1.2?
:good::good::good::good:
Great
Is it ok to flash directly from Existenz 2.1.5 which is based .266? or Do i really need to downgrade to 4.1.2?
Here's the stock rooted XNPH44S ROM. Includes root(enable in Developer options) and the rest is untouched, so it's OTA safe
Custom kernel users may need to make a change to the build.prop to get root working if the default.prop in the kernel ramdisk if not set like I have it(may affect future OTAs)
Change
Code:
persist.sys.root_access=0
To
Code:
persist.sys.root_access=1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Stock Rooted XNPH44S ROM - Mirror
md5 - c43646eb36bbe4e2d3a0e7654c8e4419
XNPH44S Radio files, etc - Mirror
md5 - 83caeff9178f2910014f0be5ca02ce6d
Thanks
Sent from my A0001 using Tapatalk
---------- Post added at 08:24 PM ---------- Previous post was at 08:23 PM ----------
Mirror is not working. Fyi
Sent from my A0001 using Tapatalk
Devhost link downloads at sub-dial-up speeds.
Mirror is broken (seven years of bad luck for you)
Edit: I guess I jumped the gun a little on that one
Edit: So close to first
Someone do me favor and post a screenshot of the about window as I forgot to when I did a test flash as I want to include it in the OP
notyu1459 said:
Devhost link downloads at sub-dial-up speeds.
Mirror is broken (seven years of bad luck for you)
Click to expand...
Click to collapse
Mirror is still uploading but it should be done in about 10 mins or so :good:
Allright! Gonna do a clean install for this beast, anybody know if the camera is changed?
Great.. Thanks a lot!
Dev-host is slooow. Will wait for mirror.
Your the Man..thank you!
Is this ok to dirty flash over 38r? Then I guess flash radio file afterwards?? Does supersu need to be unistalled first?
Is this F2FS compatible? Also can i restore the 'data' from my nandroid backup if i flash this?
Basically is it flashable over 38R or requires to be a clean install?
@Calkulin any chance of making it comoatible f2fs?
Lookitfast said:
Is this ok to dirty flash over 38r? Then I guess flash radio file afterwards?? Does supersu need to be unistalled first?
Click to expand...
Click to collapse
It can be flashed over 38R without wiping and just flash the radio files after flashing the ROM. As for SuperSU, if it's still there after flashing(because it was updated through the play store), then just uninstall it as it won't work due to the su binary being the CM version
tofuboi01 said:
Is this F2FS compatible? Also can i restore the 'data' from my nandroid backup if i flash this?
Basically is it flashable over 38R or requires to be a clean install?
Click to expand...
Click to collapse
I don't think the stock kernel is F2FS compatible but if you change the kernel and format the partitions accordingly, it should work just fine
cashflip said:
@Calkulin any chance of making it comoatible f2fs?
Click to expand...
Click to collapse
All you need to do is change the updater script to format the system partition to F2FS while flashing the ROM and flash a kernel that supports F2FS & mounts the partitions as F2FS
Calkulin said:
It can be flashed over 38R without wiping and just flash the radio files after flashing the ROM. As for SuperSU, if it's still there after flashing(because it was updated through the play store), then just uninstall it as it won't work due to the su binary being the CM version
I don't think the stock kernel is F2FS compatible but if you change the kernel and format the partitions accordingly, it should work just fine
Click to expand...
Click to collapse
I will use AK kernel so f2fs is supported, but i just would like to confirm if this would flash on f2fs partition first?
thanks for the speedy response!
SuperSU cannot be used after flashing this rom?
metaldood said:
SuperSU cannot be used after flashing this rom?
Click to expand...
Click to collapse
refer to post 12
Thanks for putting this together
Eris-Droid X-Incredible-Rezound-S2-Galaxy Nexus-Note 2-Note 3-Moto X 2nd Gen-OnePlus One
Do we install radio as well if we're installing the ROM?
konman21 said:
Do we install radio as well if we're installing the ROM?
Click to expand...
Click to collapse
Post 12
Just did a factory reset and installed the ROM and radio. Upon boot up, I have no superuser at all.
Currently I'm reflashing the ROM after doing an advanced wipe with system, data, dalvik and cache to see if it fixes it.
Is this the right way to do it?
EDIT: Still no supersu. How do we get root working?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Based on Lollipop v5.1.1
Device C6833
Features Root & Multi-recovery included
Bootloader locked and unlocked
Built with XperiFirm and PRFCreator
Features
Odexed
Root
Multi-Recovery
Signed
Zipaligned
Pics quality tweaks (replacing the build.prop)
Snapdragon tweaks (replacing the build.prop)
Audio tweaks (replacing the build.prop)
Google DNS (replacing the build.prop)
Dialing tweaks (replacing the build.prop)
Network tweaks (replacing the build.prop)
Download
Firmware C6833_14.6.A.0.368 No Brand Italy Unlocked Bootloader (LP 5.1.1)
Firmware C6833_14.6.A.0.368 No Brand Italy Locked Bootloader (LP 5.1.1)
build.prop for C6833_14.6.A.0.368 edited by Jo-san
Xperium Bootanimation developed by Interface (Team Delirium)
How to flash it
make sure to be on a rooted rom with Philz recovery
download saving the rom on your External SD
reboot to Philz recovery
wipe (data, cache, dalvik/art cache) and format (cache, system, data)
flash rom
Info
to replace the build.prop you must replace it on system/ with the rw-r--r-- permissions
to replace the bootanimation you must replace it on system/media/ with the rw-r--r-- permissions
to install Xposed Installer properly you must download the APK and flash THIS from the recovery
I would say thanks to all the developers into theese tool projects [NUT], IaguCool and zxz0O0! Please to consider a donation for a beer!
Any damage is at your sole responsibility!
Does it work on the 6833 version?
albireox said:
Does it work on the 6833 version?
Click to expand...
Click to collapse
of course
Jo-san said:
of course
Click to expand...
Click to collapse
Thanks for this, it works fine, Unlocked, I did remove loads of apps and firmware to suit my own usage.. this just works.
(removed all social apps, auto up-load stuff, and a couple of silly thing like sketch and AR effects.. just stuff I don't need or want)
corum3 said:
Thanks for this, it works fine, Unlocked, I did remove loads of apps and firmware to suit my own usage.. this just works.
(removed all social apps, auto up-load stuff, and a couple of silly thing like sketch and AR effects.. just stuff I don't need or want)
Click to expand...
Click to collapse
Yes me too! It's a pleasure! I developed many rom for Galaxy Note before...but this is the first work i m sharing on xda...this isn t a so elaborate work but i m starting a deodex project #staytuned
Big thanks to the OP for this one have been foxed trying to root mine on lollipop and this is perfect!! This is untouched apart form the root and recovery?? What does the prop mod do??
Thanks Steve
Yep, this is an original firmware with root and recovery...the build.prop include my tweaks for a better wifi and 3g signal...increasing wifi and 3g performance...streaming video....battery performance..and other...
Please to follow my procedure to flash closely!
Jo-san said:
Please to follow my procedure to flash closely!
Click to expand...
Click to collapse
Whats the maximum cpu frequency from Sony in Stock Rom???
Sent from my Z Ultra using Tapatalk
Godaemon said:
Whats the maximum cpu frequency from Sony in Stock Rom???
Sent from my Z Ultra using Tapatalk
Click to expand...
Click to collapse
2.22
please, leave me a feedback
can i flash it on stock KK 4.4.4 ?
raisqureshi said:
can i flash it on stock KK 4.4.4 ?
Click to expand...
Click to collapse
Of course but follow my guide...you need root and recovery before flash my rom
Jo-san said:
Of course but follow my guide...you need root and recovery before flash my rom
Click to expand...
Click to collapse
Your guide is very basic, followed it with mine but it will not install. Says installing, 2 seconds later it tells me it's installed. But it's not.
Was you on Philz Recovery?
Jo-san said:
Was you on Philz Recovery?
Click to expand...
Click to collapse
Yes as I said I followed your guide so was using Philz Recovery, even tried TWRP still same result. Will try downloading again just to make sure it's not a corrupt zip file.
Will report back after downloaded and try installing again.
Edit: All good now, had the wrong version of Philz Recovery installed. Installed and running now.
samorgs said:
Yes as I said I followed your guide so was using Philz Recovery, even tried TWRP still same result. Will try downloading again just to make sure it's not a corrupt zip file.
Will report back after downloaded and try installing again.
Edit: All good now, had the wrong version of Philz Recovery installed. Installed and running now.
Click to expand...
Click to collapse
You have to revert back to kk and do a 100% wipe of data internal SD this is a common issue.
RealityFails said:
You have to revert back to kk and do a 100% wipe of data internal SD this is a common issue.
Click to expand...
Click to collapse
As I said, turned out I was using the wrong version of Philz. I was running KK, just that with the version of Philz I was using it just was not installing the ROM. Installed the correct Philz and it installed straight away.
?
samorgs said:
As I said, turned out I was using the wrong version of Philz. I was running KK, just that with the version of Philz I was using it just was not installing the ROM. Installed the correct Philz and it installed straight away.
Click to expand...
Click to collapse
Haha missed that Part
i m going to do a new rom as soon as the new firmware on xperifirm will be able to download
Mod Edit links removed
so how the step
Can't open any samsung-updates.ru link, is the site down or something? Where else can I find my device (J500M UD [Mexico]) firmware?
JH97 said:
Can't open any samsung-updates.ru link, is the site down or something? Where else can I find my device (J500M UD [Mexico]) firmware?
Click to expand...
Click to collapse
sammobile.com/firmwares?
Galaxy J5 (2016) firmware online, should launch in Europe and other markets soon
I downloaded my firmware from sammobile.com, it doesn't install the russain things like the links above do,
But I am a noob so i would just like to know is there anyway to verify if the download is working and is there no MD5 and SHA Checksum Utility code for it like there is for a custom rom? And one last question what is the difference between XFE and XFA? I know XFV is Vodacom.
reus11 said:
I downloaded my firmware from sammobile.com, it doesn't install the russain things like the links above do,
But I am a noob so i would just like to know is there anyway to verify if the download is working and is there no MD5 and SHA Checksum Utility code for it like there is for a custom rom? And one last question what is the difference between XFE and XFA? I know XFV is Vodacom.
Click to expand...
Click to collapse
Hi,
Not sure the difference between XFA & XFE; there really was none that I could see. I have installed both those versions before, as well as United Emirates, Russian, Iraq etc. versions , and they all worked on the South African network (Vodacom). Some just have extra user apps, and newer modems for the phone eg. L1, L2, PB2...
Hey Friends,
can anyone give me download link to CM12 for this device?
Greets Mark
Need Pit file
Hi !
Please help me ! I need pit file for J500FN. After flashing soft with Odin phone restarts to Recovery and have multiple red information "Can't mount", "Can't open" etc.
Something like that:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
here u R.. just created from my J500FN
So I have a big problem.I flashed twrp recovery on my galaxy J500FN and now I am stuck on recovery.I know flashing stock with kies should fix it,but is there a way to fix it without losing twrp because I would like to have custom recovery.I have tried many things,but when I boot,it always goes to recovery.:crying:
Please help a n00b
Thanks.
Happonee said:
So I have a big problem.I flashed twrp recovery on my galaxy J500FN and now I am stuck on recovery.I know flashing stock with kies should fix it,but is there a way to fix it without losing twrp because I would like to have custom recovery.I have tried many things,but when I boot,it always goes to recovery.:crying:
Please help a n00b
Thanks.
Click to expand...
Click to collapse
Did you flash v3 as in the OP? There was an issue a while back with an older 2.8.7 that did that, but it was fixed a while ago.
jdstrydom said:
Did you flash v3 as in the OP? There was an issue a while back with an older 2.8.7 that did that, but it was fixed a while ago.
Click to expand...
Click to collapse
I am not sure.I try to flash v3 now.
---------- Post added at 04:11 PM ---------- Previous post was at 03:54 PM ----------
jdstrydom said:
Did you flash v3 as in the OP? There was an issue a while back with an older 2.8.7 that did that, but it was fixed a while ago.
Click to expand...
Click to collapse
I flashed v3 and now it works!Thank you for helping
(sorry for being n00b)
Hello guys, so im stucked on bootlogo(bootlooped) where i've just flashed the xposed-v72-sdk22-arm.zip and when i started to reboot my phone, it suddenly happened. Hoping that someone could help me out with this. and btw, if ever i wanted to flash for another stock firmware which i am at, do i still need to delete my system,data,cache something like that before flashing the new firmware? Thanks and more power xda developers.! *cheers*
i thought this, too. right after plashing xposed, but the first bootup just needed 10-15min.. weird
I need a ROM Persian language j5008
please help
Hi, just wondering wich one this is
LMY48B.J5000FNXXUAOJ2, found several J2 versions but dunno wich one.
Have tried to Google it.
Regards Jonny
Hi guys,
Do you know if firmware with FRENCH exists ?? If yes, can you give me the product code ? Thx !
Br
gelmarkliao said:
Hello guys, so im stucked on bootlogo(bootlooped) where i've just flashed the xposed-v72-sdk22-arm.zip and when i started to reboot my phone, it suddenly happened. Hoping that someone could help me out with this. and btw, if ever i wanted to flash for another stock firmware which i am at, do i still need to delete my system,data,cache something like that before flashing the new firmware? Thanks and more power xda developers.! *cheers*
Click to expand...
Click to collapse
Don't worry, I have had that problem too many times too. It's very easy.
First of all, flash xposed Uninstaller file.
Next, it is possible you lost root in the process. Use chainfire root method to reroot the phone. Now flash twrp 3.0.0 to get a custom recovery. After that, download xposed framework v79. 1 (custom built by wanam for Samsung lollipop devices). Don't download any other version but v79. 1. I have noticed that my j500f only supports xposed v79.1 and it works fine. There is no need to flash the stock rom again. Just reroot and flash twrp. Then flash xposed v79. 1. Alternate way that I have flashed xposed is using Flashfire application. It works way too well. Give it a try. It's a beast of an application.
Goodluck!
Sent from my SM-J500F using XDA-Developers mobile app
Okay, so previewers and testers, Chainfire has finally updated SuperSU to support the N Developer Preview
UPDATE: SuperSU v2.70 has been released.
Click to expand...
Click to collapse
Roll up your sleeves, and root right now.
Here's the thread: http://forum.xda-developers.com/apps/supersu/wip-android-n-preview-t3335726
NOTE: Be sure to roll back to N Preview boot.img, just in case you have tried other root methods. Share the results and issues (if any)
Click to expand...
Click to collapse
I have written a tutorial, you can view it, if you like: Root Android N Developer Preview
Also read - Android N Features - What We Know So Far
Franco's Kernel is now available for N Preview: http://forum.xda-developers.com/showpost.php?p=65836126&postcount=3093
A new update for Preview 1 is now available: http://www.droidorigin.com/android-n-developer-preview-update/
If you want to roll-back to latest stable software: http://www.droidorigin.com/return-from-android-n-developer-preview/
nfl46 said:
Thanks! I've been waiting for this.
Click to expand...
Click to collapse
Thanks to Chainfire, I am just sharing
So... If I'm on stock N (stock system, stock boot.img, stock recovery, etc.), would the easiest way be to just flash the latest TWRP and then flash the SuperSU zip? Just want to make sure I'm understanding everything correctly
Sent from my Nexus 6P using Tapatalk
Othoric said:
So... If I'm on stock N (stock system, stock boot.img, stock recovery, etc.), would the easiest way be to just flash the latest TWRP and then flash the SuperSU zip? Just want to make sure I'm understanding everything correctly
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Yes :good:
But, in case you have forced encryption, and the package doesn't flash, you can feel free to use the CF-Auto-Root package.
So I can use TWRP to roll back to my Marshmallow I'm currently on using the restore function if N doesn't cut it for me? Would I have problems with encryption or userdata by restoring (assuming I've backed up everything)?
What are you guys using for modified boot img to disable forced encryption? Thanks.
nfl46 said:
Do you, by any chance, have root working on your 6P running Android N?
Click to expand...
Click to collapse
Works for me on my 6P after trying the phh SuperUser method for the past few days. It doesn't appear to mount /system as r/w though
ripv2 said:
What are you guys using for modified boot img to disable forced encryption? Thanks.
Click to expand...
Click to collapse
http://forum.xda-developers.com/nexus-6p/general/stock-modified-boot-img-regular-root-t3306684
nfl46 said:
Do you, by any chance, have root working on your 6P running Android N?
Click to expand...
Click to collapse
Yeah, it has been hours
viper2g1 said:
So I can use TWRP to roll back to my Marshmallow I'm currently on using the restore function if N doesn't cut it for me? Would I have problems with encryption or userdata by restoring (assuming I've backed up everything)?
Click to expand...
Click to collapse
If forced encryption is disabled on Android N, it would stick if you flash a custom ROM.
Root is working fine. Have TWRP booting fine and installed kylo kernel. All I need is xposed and I'll be super happy with this preview! ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Nexus 6P using Tapatalk
Is there any custom kernel working with N to enable wake and sleep gestures?
17akota said:
Root is working fine. Have TWRP booting fine and installed kylo kernel. All I need is xposed and I'll be super happy with this preview!
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
How did you flash twrp?
I tried yesterday after taking the OTA to N, and no success. =(
Just testing
Sent from my HUAWEI NXT-AL10 using XDA-Developers mobile app
Anyone come across a file explorer that can mount System R/W? I'm using https://play.google.com/store/apps/details?id=nextapp.fx&hl=en with SuperSU 2.69 and it's not able to even though the app itself does have root access.
betovanbuuren said:
Is there any custom kernel working with N to enable wake and sleep gestures?
Click to expand...
Click to collapse
Not sure about that, but franco.kernel is now available for the N Preview
betovanbuuren said:
Is there any custom kernel working with N to enable wake and sleep gestures?
Click to expand...
Click to collapse
Yes kylo kernel r4
uodii said:
Anyone come across a file explorer that can mount System R/W? I'm using https://play.google.com/store/apps/details?id=nextapp.fx&hl=en with SuperSU 2.69 and it's not able to even though the app itself does have root access.
Click to expand...
Click to collapse
Try Solid Explorer, it was working when I was on N: https://play.google.com/store/apps/details?id=pl.solidexplorer2&hl=en
I think Root Browser works too, at least I remember reading that somewhere.
bouchigo said:
Try Solid Explorer, it was working when I was on N: https://play.google.com/store/apps/details?id=pl.solidexplorer2&hl=en
I think Root Browser works too, at least I remember reading that somewhere.
Click to expand...
Click to collapse
I updated to SuperSU 2.70 and all worked fine. Thanks though!