[SM-G850F][SLTE] CyanogenMod 12.1 UNOFFICIAL BETA8 (Android 5.1) - UPDATE: 2015-10-22 - Samsung Galaxy Alpha

ABOUT THE GALAXY ALPHA CM-12.1 PROJECT
I'm working on getting CyanogenMod working on the Galaxy Alpha since October 2014. This ROM is not complete. There are still features which are not fully working and there are for sure things which need bugfixing. Please check the Known Bugs section before reporting issues.
I work on this project for FREE and putting in a lot of hours into it. A small donation would help to buy better tools to improve the development some day.
RECOVERY
To be able to install the ROM you need a recovery. I suggest to use my TWRP Recovery build. You can find it here.
BACKUP
Before installing the ROM you should create backups. The most important backup is to create one of the EFS partition and store it on safe place on your computer. If something goes wrong you need to restore this partition. It holds information about your device, like the MAC address for your wifi and information for the radio.
DOWNLOAD
You are storing very sensitive information on your phone. You always have to be careful what ROMs you flash and whom you trust. If you don't trust me then don't use my ROM or compile it from source by yourself.
The ROM will be gpg signed with my key 0xCC014E3D. You can verify the ROM with 'gpg --verify cm-12.1-20150901-UNOFFICIAL-slte-beta1.zip.asc '.
Detailed information and instruction for Windows can be found here.
Download BETA
FLASHING THE ROM
As this is a Lollipop (Android 5) based ROM you need to flash sboot (bootloader) and the modem image from one of the latest LL releases. Or install a LL ROM via the Samsung update option. You can find the latest stock ROM here. Suggested modem version is: G850FXXU2COI3 or newer
I suggest to put the ROM on a USB disk and use a USB OTG cable to flash the ROM. It is also possible to put it on the emulated sdcard and flash it from there.
GAPPS
I suggest to use Open GAPPS.
REPORTING BUGS
Give the programmer some credit for basic intelligence: if the program really
didn't work at all, they would probably have noticed. Since they haven't
noticed, it must be working for them. Therefore, either you are doing something
differently from them, or your environment is different from theirs. They need
information; providing this information is the purpose of a bug report. More
information is almost always better than less.
Click to expand...
Click to collapse
Before reporting bugs, please check the KNOWN BUGS list below and read THIS HOWTO
XDA:DevDB Information
[ROM][SM-G850F] CM-12.1 UNOFFICIAL ROM, ROM for the Samsung Galaxy Alpha
Contributors
modpunk, raymanfx, bonuzzz, kyasu
Source Code: https://git.cryptomilk.org/projects/android/android_device_samsung_slte.git/
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP/CWM Recovery
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 8
Beta Release Date: 2015-10-22
Created 2015-09-01
Last Updated 2015-10-26

---

KNOWN ISSUES
RIL: SMS broadcast subscriptions aren't working (generic failure)
MEDIA: HEVC videos don't work
INCALL: Some SLTE devices need 10-30 seconds to wake the screen on an incoming call
VOIP: Not tested (could someone please test)
CHANGELOG
2015-10-22 + BETA8
audio: Should be completely working now
ril: Fixed network operator search
2015-10-15 - BETA7
audio: More fixes to get audio fully working
audio: Fixed voice recording (camcorder should work fine now)
audio: Fixed media playback (especially over bluetooth)
camera: Fixed remaining camera issues (using LL blobs now)
Kernel: Smaller kernel image using XZ compression now
Kernel: Updated arizona sound driver
2015-10-10 - BETA6
More fixes to the audio HAL
Improved PowerHAL (VSYNC and LOW_POWER) support
This version includes the latest Security fixes for Android, see the Android Patchlevel in Settings -> About Phone.
2015-10-07 - BETA5
Fixed audio calls (wideband)
Fixed audio calls with bluetooth headset and carkit
Fixed audio recordings
This version includes the latest Security fixes for Android, details see here.
2015-10-02 - BETA4
Fixed bluetooth call playback (mics are not working yet)
Fixed two mic control in audio HAL
Fixed firmware loading on wisol devices
New sensor HAL
Improved boot time
2015-09-17 - BETA3
Added bluetooth headset support
Added support for noise suppression
Better sound quality on wideband connections
2015-09-03 - BETA2
Fixed flashing issue with TWRP
Set addtitional build information
2015-09-01 - BETA1
Initial release

---

FREQUENTLY ASKED QUESTIONS
"It doesn't work."
Give the programmer some credit for basic intelligence: if the program really didn't work at all, they would probably have noticed. Since they haven't noticed, it must be working for them. Therefore, either you are doing something differently from them, or your environment is different from theirs. They need information; providing this information is the purpose of a bug report. More information is almost always better than less.
Please read How to Report Bugs Effectively
My modem doesn't work, what can I do?
Did you flash the latest MODEM firmware from the latest Lollipop release? The suggested firmware is at least G850FXXU2COI3 or newer
How do I use adb/logcat go get logs from my device
You can find a good tutorial here.

---

I have problem with flashing. I tried with suggested TWRP. Flashing rom takes 1 second and ends with successful information
Edit. "Unable to mount /system" twrp error

---

miszko77 said:
I have problem with flashing. I tried with suggested TWRP. Flashing rom takes 1 second and ends with successful information
Edit. "Unable to mount /system" twrp error
Click to expand...
Click to collapse
Which TWRP version are you using?

---

Awesome work man. Honestly I can't flash this right now, just because, I need a fully functioning device daily so, I'll be patient

---

modpunk said:
Which TWRP version are you using?
Click to expand...
Click to collapse
I am using 2870. Anyway I flashed recovery with odin. May this be a problem?

---

miszko77 said:
I have problem with flashing. I tried with suggested TWRP. Flashing rom takes 1 second and ends with successful information
Edit. "Unable to mount /system" twrp error
Click to expand...
Click to collapse
I have same problem
---------- Post added at 09:58 PM ---------- Previous post was at 09:57 PM ----------
miszko77 said:
I am using 2870. Anyway I flashed recovery with odin. May this be a problem?
Click to expand...
Click to collapse
I am using 2.8.7 also

---

lukrangelu said:
I have same problem
---------- Post added at 09:58 PM ---------- Previous post was at 09:57 PM ----------
I am using 2.8.7 also
Click to expand...
Click to collapse
Could you connect with 'adb shell' to the recovery and run 'getenforce'. Then get me the log and avc_msg file with:
adb pull /tmp/recovery.log
adb pull /proc/avc_msg
and paste the file somewhere ...

---

modpunk said:
Could you connect with 'adb shell' to the recovery and run 'getenforce'. Then get me the log and avc_msg file with:
adb pull /tmp/recovery.log
adb pull /proc/avc_msg
and paste the file somewhere ...
Click to expand...
Click to collapse
-a - directs adb to listen on all interfaces for a connection
-d - directs command to the only connected USB device
returns an error if more than one USB device is present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is running.
-s <specific device> - directs command to the device or emulator with the given
serial number or qualifier. Overrides ANDROID_SERIAL
environment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
-H - Name of adb server host (default: localhost)
-P - Port of adb server (default: 5037)
devices [-l] - list all connected devices
('-l' will also list device qualifiers)
connect <host>[:<port>] - connect to a device via TCP/IP
Port 5555 is used by default if no port number is specified.
disconnect [<host>[:<port>]] - disconnect from a TCP/IP device.
Port 5555 is used by default if no port number is specified.
Using this command with no additional arguments
will disconnect from all connected TCP/IP devices.
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> [<local>] - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(-l means list but don't copy)
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward --list - list all forward socket connections.
the format is a list of lines with the following format:
<serial> " " <local> " " <remote> "\n"
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb forward --no-rebind <local> <remote>
- same as 'adb forward <local> <remote>' but fails
if <local> is already forwarded
adb forward --remove <local> - remove a specific forward socket connection
adb forward --remove-all - remove all forward socket connections
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] [-s] [--algo <algorithm name> --key <hex-encoded key> --iv <hex-encoded iv>] <file>
- push this package file to the device and install it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data)
('-s' means install on SD card instead of internal storage)
('--algo', '--key', and '--iv' mean the file is encrypted already)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories)
adb bugreport - return all information from the device
that should be included in a bug report.
adb backup [-f <file>] [-apk|-noapk] [-obb|-noobb] [-shared|-noshared] [-all] [-system|-nosystem] [<packages...>]
- write an archive of the device's data to <file>.
If no -f option is supplied then the data is written
to "backup.ab" in the current directory.
(-apk|-noapk enable/disable backup of the .apks themselves
in the archive; the default is noapk.)
(-obb|-noobb enable/disable backup of any installed apk expansion
(aka .obb) files associated with each application; the default
is noobb.)
(-shared|-noshared enable/disable backup of the device's
shared storage / SD card contents; the default is noshared.)
(-all means to back up all installed applications)
(-system|-nosystem toggles whether -all automatically includes
system applications; the default is to include system apps)
(<packages...> is the list of applications to be backed up. If
the -all or -shared flags are passed, then the package
list is optional. Applications explicitly given on the
command line will be included even if -nosystem would
ordinarily cause them to be omitted.)
adb restore <file> - restore device contents from the <file> backup archive
adb help - show this help message
adb version - show version num
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb get-devpath - prints: <device-path>
adb status-window - continuously print device status for a specified device
adb remount - remounts the /system partition on the device read-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the bootloader or recovery program
adb reboot-bootloader - reboots the device into the bootloader
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on the specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be updated.
- If it is "system" or "data", only the corresponding partition
is updated.
environmental variables:
ADB_TRACE - Print debug information. A comma separated list of the following values
1 or all, adb, sockets, packets, rwx, usb, sync, sysdeps, transport, jdwp
ANDROID_SERIAL - The serial number to connect to. -s takes priority over this if given.
ANDROID_LOG_TAGS - When used with the logcat option, only these debug tags are printed.
would it be this?

---

Blubberor said:
Thanks a lot modpunk,
initial bug after doing wipe incl. Cache, dalv.cache and using same minimal gapps that works in kyasus cm12.1
I dont have network setting up, sim card not detected and cannot manually activate it.
Again thank you for your work,
blubberor
Click to expand...
Click to collapse
Read the bug report section in the initial post, provide logcat for system/main and also radio. This is a beta version you should at least know the basics how to get information from the device ...

---

lukrangelu said:
would it be this?
Click to expand...
Click to collapse
Not even close. If you want to run a beta version you should learn at least the basics for using adb.

---

ADB/LOGCAT HOWTO

---

Here you are.
getenforce
Permissive
Click to expand...
Click to collapse

---

miszko77 said:
Here you are.
Click to expand...
Click to collapse
The recovery reports:
Code:
You have an installed system that isn't signed with this build's key, aborting...
script aborted: Can't install this package on top of incompatible data. Please try another package or run a factory reset
Can't install this package on top of incompatible data. Please try another package or run a factory reset
This is a pretty obvious message to me. You need to wipe system and data in order to install the ROM.

---

modpunk said:
You need to wipe system and data in order to install the ROM.
Click to expand...
Click to collapse
Result of wiping caches, data and system. See attachment.
I did factory reset and getting the same information.

---

miszko77 said:
Result of wiping caches, data and system. See attachment.
I did factory reset and getting the same information.
Click to expand...
Click to collapse
I've wiped my system partition and running into the same problem as you know. I'm investigating it now ...

---

modpunk said:
Read the bug report section in the initial post, provide logcat for system/main and also radio. This is a beta version you should at least know the basics how to get information from the device ...
Click to expand...
Click to collapse
Mfg

---

Blubberor said:
Mfg
Click to expand...
Click to collapse
Please pull /proc/avc_msg ...

---

modpunk said:
Please pull /proc/avc_msg ...
Click to expand...
Click to collapse
and here you go.
Thanks a lot. crossing fingers that the avc_msg.log helps you with fixing.
Tschö,
blubberor