Here's a Stockish ROM for your N915P. This ROM has Knox, Sprint ItsOn, and secure storage removed. Nothing else was done to this ROM. I'm new to the Note Edge so I may upload patches to remove any other traces of Knox or ItsOn or optimizations I happen to find while making my own ROM.
Prereq: OG1 Baseband. Download it below.
Modified stock kernel (BeastMode Stock): Kernel modified to allow root by disabling "Root Restriction in defconfig"
Download
MD5: 75bd507e3b4296a128f1c0c48fd2359c
Version 1.1: Enabled many TCP Congestion options via defconfig. Added init.d ability via ramdisk.
Odex:
Download
MD5: 59d544ef6a4bc12d969f4efd9577d36d
DeOdex DEBLOATED:
Download
MD5: 00b5246b9c2074e7ff04f6af2bad1ec2
OG1 Baseband:
Download
MD5: 3bc88209d60117fb573e0f5a2e50f4e9
Patches and fixes:
None yet.
[size=+3]DeOdex note:[/size]
The first boot time for this DeOdex ROM is very long. Approximately 5-8 minutes. Your phone will get hot as the splash screen remains on the yellow Sprint boot animation. I recommend keeping your phone in a cool environment while this is happening. The heat, if not properly checked, can make boot times even longer as the system throttles speed in order to deal with the heat. This doesn't happen on the Odex version.
[size=+3]Install instructions:[/size]
-Are you currently on the OC8 bootloader and would like to stay on it?
--Simply flash the baseband with Odin, and the ROM.
-Are you on the update from OTA or flashed the OG1 TAR?
--Flash kernel only.
-Are you one of the unlucky ones to take the OTA and hose your system trying to root and are now on another ROM?
--Flash ROM only.
-Are you on any build after OC8 but not the current OG1?
--Flash the baseband and ROM. Bootloader is optional and not available in this thread as of yet.
Wiping is only necessary if you are coming from a different base, such as AOSP/CM. If you are coming from a touchwiz ROM, wiping isn't needed, but won't hurt.
Changelog:
9/5/15: Initial Release.
Kernel source code: Download
Thanks, will flash tomorrow.
Thank you so much freeza!! Patiently waiting for the deodexed version and for the baseband.
Added modified stock kernel v1.1 and baseband.
Freeza if I'm on 5.0.1 still just flashing the baseband may give me better service ? Technically...
Downloading now still waiting on the deodex will play with the stock to see how it is thanks
Ok, flashed rom, kernel, and modem. Took a while to boot but all is running well at the moment. Thanks for supporting our device!!
DeOdex uploading....
What What!!! By far the best developer on a Samsung!! Thank you so much for your hard work brother!! Real Talk, i still have your rom on my Note 3! It runs flawlessly!! XD
Get your DeOdex on, guys! ;D
Thanks so much for this!!! I love the separate edge screen and have no reason to "upgrade" to the Note 5
Thank you freeza NICE WORK WITH THE KERNEL
When I saw you had been requested to come help this phone achieve root I knew great things were going to come to those who waited. I've had other devices where you were there to help gain root and again you came through. I purposely didn't take the OG1 update because I knew in time this device wasn't going to be ignored. IMO it is the best NOTE device out there and it will be mine until they make a NOTE EDGE 2 (With SD card and removable battery). Thank you for the quick response and the hard work you do to make this happen.
Cant get either one of them to boot. Both the odex and the deodex wont boot, they both flash fine and then after the phone reboots it stays on the yellow sprint screen Maybe for up to a minute then reboots and it cycles that way. Never boots. I've tried not wiping/Factory restarting as well as wiping/Factory resetting. Have also tried formatting through TWRP to no avail. Have also tried flashing the kernel and wiping caches after flashing but Nothing is working. Have also flashed the baseband.
Im currently on OF6 if that should matter.
Edit: md5 Sums have also match up. Have downloaded both from my phone and a pc to no avail.
Edit 2: tried both TWRP 2.8.6.0 and 2.8.7.0. Also tried clockworkmod recovery and that didn't work either.
I had success but it took some time. I downloaded the deodexed debloated rom, the kernel, and the baseband. I had a method to how I wanted to do this and here is how i got there.
I was running OC8 rom rooted.
1. I odened the baseband tar file and rebooted. But unfortunately it bootlooped on the initial splash screen (note edge) so
2. I ran TWRP recovery and installed the kernel file. Rebooted phone and it ran fine. I looked at the settings about phone and saw that the baseband and the rom all said OG1 but i had not installed the rom yet. So i figure it was a trick to get the baseband to install. So
3. I went back into recovery. Wiped dalvik cache and regular cache and installed the new rom. It installed fine and i waited the length of time for the initial boot up. But this time as it was "Android is starting" it rebooted and got stuck on the sprint splash screen and kept randomally vibrating. Having the ability to remove the battery
4. Rebooted back into recovery, wiped everything including internal storage, and reinstalled the deodexed rom. It installed fine and went to the initial startup screen where it tries to initialize and it rebooted one time, back to the initialize screen but continued without a hitch.
I currently am running OG1 5.1.1. With root.
At times during setting up the phone it would randomally vibrate for no reason...short bursts...but it hasn't yet again rebooted, restarted, or crashed. It is faster from what i see. Probably because there are almost no google apps installed. I've had to install chrome, youtube, and maps. But all seems fine. My signal and speeds are the same so the baseband didn't do much to change that. But so far so good.
---------- Post added at 11:30 AM ---------- Previous post was at 11:27 AM ----------
I did try to install over my odexed OC8 with this new rom but because there is so much different about the files that are installed IMO formatting the phone was the only way to get this to work.
---------- Post added at 12:16 PM ---------- Previous post was at 11:30 AM ----------
One final thing just in case it isn't known: when you wipe everything in TWRP, excluding external storage, you have to restart the recovery before trying to install a rom. It will say you have no OS installed, but you are restarting the recovery not booting a rom, so that's fine, but you do lose root status when wiping. So the next screen gives you the ability to gain root again, but you have to restart TWRP to do that. In the past i tried to figure out why installing after wiping didn't work, and 99% of the time it was because of that. I also don't like installing new roms over older roms (even if they are the same base (touchwiz to touchwiz)) because i feel I would spend more time troubleshooting why something isn't working instead of just starting over. I find less hassle doing it this way.
I odin baseband .tar file, than reboot it to recovery, and flash kernal and odex room at the same time, saw some red messages when kernel was flashing, than odex rom was next but it was successful when it was done. (I did not know if kernel falsh ok so i reflash kernel again) reboot to system and after the android system updated all its ok. No problems so far.
Oh and i inclided the supersu at the same time i flash kernel, odex rom and supersu.
1. Odin baseband tar file.
2. Flash kernel, odex rom and supersu.
3. Re-flash kernel.
4. Reboot to system and profit.
(Maybe i did un necessary steps, but its working. )
Was running great but have been experiencing Google account and store issues. Tried odex and deodex versions with similar results. Anyone else having issues?
Johnny Halo III said:
Was running great but have been experiencing Google account and store issues. Tried odex and deodex versions with similar results. Anyone else having issues?
Click to expand...
Click to collapse
Just starting to have random freezing. And not able to select my apps froms the edge screen, i can only scroll through it. Will remove all the app shorcuts and re-add tham again.
**update 1.
I removed all shorcuts from the edge screen and added them back, all work but some i have to select them a few times before they open.
Maybe i have to reflash, reset, clean and wipe.
**update 2.
Clean install of odex rom, and kernal 1.1.
No more lagg but the edge screen does not work properly. Not able to select and open some of the favorite app shorcuts.
**update 3.
Factory reset, cleaned and wype, odin sprint lollipop update (uf something), downloaded OG1 update. Installed all apps from scratch. And the edge screen does not work. I can scroll, side to side, up and down, but when i select an app it does not open it.
** update (last one)
Foud the code to test the phone hardware.
*#0*# on dial screen. Tested all and it came out good. But i notice that some how the edge screen its not as whide as it used to be ( like its more to the right of the phone) so where i use to touch to select an app its now more to the right emd of the edge, thats why i was able to scroll but not select the app.
Its all good now. Now second round of flashing.
Will give it another try at the room.
Thanks Freeza and sorry about the problems i had and hopefully did not cause anyone from not trying this great work pr yours.
I left all the problems i had so tje next person trying this room does not get discureged from trying. But allways fallow direction.
:thumbup:
** last update
After setting and resetting, flashing and un-flashing, rooting and un-rooting. I can finally wrote that all is good. Running latest lollipop 5.1.1 and freeza's new 1.1 kernel, I can reprt that all is smooth as butter.
Thanks for the hard work.
Thank you so much for your hard work Freeza! So glad I'm finally running 5.1.1 on this beast :]
The ROM is working pretty well, but I have noticed that every now and then, the phone will be rather laggy. Turning the screen off and on again seems to fix the issue, making me think that the processor is being throttled while the screen is off (good) but isn't being sped back up when the screen is turned on..sometimes.
It's not a huge deal, but I was wondering if anyone was experiencing the same thing.
No issues here.
Starting on OG1 had to flash bootloader, kernel, deodex rom and supersu to make it stick. Two days now and battery, signal and speed seem improved.
Thanks freeza!
Related
I just installed PM 4.3 and from what i read it should be compatible with newest UBER 3.0 kernal but it just stays stuck in splash (pacman roms, game over, instert coin etc.) I tried downgrading to previous twrp, reflashing rom and gapps, and also tried factory reset. Any help of info would be appreciated, sorry if this is wrong section.
l330n said:
I just installed PM 4.3 and from what i read it should be compatible with newest UBER 3.0 kernal but it just stays stuck in splash (pacman roms, game over, instert coin etc.) I tried downgrading to previous twrp, reflashing rom and gapps, and also tried factory reset. Any help of info would be appreciated, sorry if this is wrong section.
Click to expand...
Click to collapse
there is a compatible Uber for that. most developers will suggest at least 24 hours with kernel included in rom. you don't have to just suggested.
you mentioned a previous TWRP, but you didn't mention any specific versions.
2.6.0.1 is working great for me
2.6.0.3 seemed to have some issues, hence the reason I am still on 0.1
2.6.1.0 is most recent, but until I have problem with 0.1 im sticking with it.
you should always factory reset and it suggested to repeat 3-4 times to clear out any remaining leftover goop.
my routine an also used by others is...........
3 wipes, cleanliness is next to godliness
flash rom alone
flash rom again w/ gapps
wipe davlik and cache
boot up and let settle the 10 mins
reboot and set up
maybe overkill but has not failed me
captemo said:
there is a compatible Uber for that. most developers will suggest at least 24 hours with kernel included in rom. you don't have to just suggested.
you mentioned a previous TWRP, but you didn't mention any specific versions.
2.6.0.1 is working great for me
2.6.0.3 seemed to have some issues, hence the reason I am still on 0.1
2.6.1.0 is most recent, but until I have problem with 0.1 im sticking with it.
you should always factory reset and it suggested to repeat 3-4 times to clear out any remaining leftover goop.
my routine an also used by others is...........
3 wipes, cleanliness is next to godliness
flash rom alone
flash rom again w/ gapps
wipe davlik and cache
boot up and let settle the 10 mins
reboot and set up
maybe overkill but has not failed me
Click to expand...
Click to collapse
Cool, thanks for the tips, ill try them once i get home in the morning from work.
I saw someone recommend twrp 2.6.1.0 (still hangs), at first I had 2.6.3.0 (newest i believe) and still kept hanging on splash
Do you know which uber kernal is the correct one for that rom or is it just the one included in newest pacman rom 4.3?
I may just try out carbon and revolt, seems like more people running those roms. I was messing with some of the color setting in PA and phone locked up on me and it was weird, had like a greenish screen that got brighter and brighter and brighter eventually i just shut it off, it was fine when i restarted. Im not too worried about changing the colors really, i was just tryin it out.
I don't know what happened. Or why it won't work.
When Safestrap was originally finished, I installed Hyperdrive without a problem. An update came, I downloaded and installed. It made it so I couldn't use HotSpot anymore. So, I figured it was the Rom, and I installed Jellybean Rom. I didn't like it. I tried to install the original Hyperdrive I had, and once its installed and reboots, the lights come on for one second and shut off. Downloaded the newest Hyperdrive, same issue.
The instructions say wait for 10 minutes. I did, and longer. (Range usually 20-40 minutes)
Last night I wanted to try again, (downloaded newest hyperdrive. I have sloooooow internet. Took 5 hours to finish). So, I tried installing today following the instructions, same issue. It installs and says everything is fine, reboot, safestrap pops up, loads normally through that, and the lights are on after like it starts with Stock, lights shut off, phone stops working.
When this happens, the phone does not respond to anything. Power does nothing. I waited 45 minutes the 3rd time trying to reboot after install. The phone will not turn on, respond, or anything unless I pop the battery out and put it back in. I can get back into Safestrap that way.
I really want to use Hyperdrive, but it just won't reboot for my phone.
I do have the Verizon i545 version, ME7, Safestrap, Rooted, and newest Hyperdrive Rom. Used the Safestrap Kernel, but the phone locks up.
I've tried default settings, different Rom settings, (2gb and 3gb), removing almost everything from install, adding what I want, adding what I like, etc. No combination of settings will let me phone boot into Hyperdrive.
Any thoughts?
Are you completely removing then re-creating the slot when trying all these flashes?
Are you flashing the ME7 kernel module.zip ?
I redo the rom slot each time and act like it's the first time.
And i can't install the module... Tried multiple times but it fails almost instantly through ss.
Sent from my SCH-I545 using xda app-developers app
Excessumcarcer said:
I redo the rom slot each time and act like it's the first time.
And i can't install the module... Tried multiple times but it fails almost instantly through ss.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Have you tried to re-download the module? Preferably on the computer then transfer to your ExtSDCard with the ROM.
So... The one I downloaded to my computer failed, but the one I did with my phone worked.
Still the same issue. Won't boot past the SS message.
Sent from my SCH-I545 using xda app-developers app
Excessumcarcer said:
So... The one I downloaded to my computer failed, but the one I did with my phone worked.
Still the same issue. Won't boot past the SS message.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
While you were trying to install did you notice if zip signature was checked if so uncheck when you install and uncheck when you install module other than that don't know what else to say. When i first started i found that to be my problem.
The zip signatures were not checked. : /
Sent from my SCH-I545 using xda app-developers app
And I've tried the older version Hyperdrive with the new ME7 Modules, still won't work. I can't understand because everything says it was successful and ready to go, but it just doesn't.
Also double checked my i545 version, it is still ME7 and not the new one. The new update is pushy and wants to be installed more aggressively than the ME7 did. Highly annoying...
Excessumcarcer said:
And I've tried the older version Hyperdrive with the new ME7 Modules, still won't work. I can't understand because everything says it was successful and ready to go, but it just doesn't.
Also double checked my i545 version, it is still ME7 and not the new one. The new update is pushy and wants to be installed more aggressively than the ME7 did. Highly annoying...
Click to expand...
Click to collapse
Get off 3.62 and go back to 3.6 if you can. use root uninstaller to get rid of the current SS and shut down normally. ( all in stock rom ) reboot to stock recovery and factory reset. put the 3.0 SS back on and install twrp through that and reboot fully. then you can go into SS and reboot to recovery and you should be good
EDIT: go back to 3.6 SS not 3.0 haha
EDIT 2: always wipe even after you just created the slot and flash the modules with HD10 and advanced wip the dalvik and the cache only. and chill for 10 and boot her up..... and make sure you didnt accdentally get the dreadful OTA!!!
!Led*Eyes! said:
Get off 3.62 and go back to 3.6 if you can. use root uninstaller to get rid of the current SS and shut down normally. ( all in stock rom ) reboot to stock recovery and factory reset. put the 3.0 SS back on and install twrp through that and reboot fully. then you can go into SS and reboot to recovery and you should be good
EDIT: go back to 3.6 SS not 3.0 haha
EDIT 2: always wipe even after you just created the slot and flash the modules with HD10 and advanced wip the dalvik and the cache only. and chill for 10 and boot her up..... and make sure you didnt accdentally get the dreadful OTA!!!
Click to expand...
Click to collapse
FINAL EDIT!!! always pick the safestrap kernel during the Aroma install
If I helped at all, shoot me a Thanks and happy flashing!!
!Led*Eyes! said:
FINAL EDIT!!! always pick the safestrap kernel during the Aroma install
If I helped at all, shoot me a Thanks and happy flashing!!
Click to expand...
Click to collapse
I promise you this makes no sense....and I think there was something wrong with the stock rom...only thing I can conclude. I did a factory reset and bricked my phone. I can't even get into Safestrap now...whatever the issue was with the custom rom is now the issue with the stock rom. So, i'm just going to wipe my phone and start over from scratch as that is the only available step. Ill let you know if it fixed the issue or not.
Excessumcarcer said:
I promise you this makes no sense....and I think there was something wrong with the stock rom...only thing I can conclude. I did a factory reset and bricked my phone. I can't even get into Safestrap now...whatever the issue was with the custom rom is now the issue with the stock rom. So, i'm just going to wipe my phone and start over from scratch as that is the only available step. Ill let you know if it fixed the issue or not.
Click to expand...
Click to collapse
Did you have 3.62? my buddy did and his phone wouldnt let him delete it! crazy. i dont like 3.62 but i was running HDrls10 like a champ. not a single issue. With the me7 base i want to say i didnt even flash the modules over it but i cant remember. but basically ( by what i wrote down) you were going to start from scratch anyway.. there is a better root out now anyway. use the dialer codes and get a REAL factory reset!! There are a lot of people that arent digging the 3.62..... it was causing bootloops for a while but there are def still some lingering issues i think.
!Led*Eyes! said:
Did you have 3.62? my buddy did and his phone wouldnt let him delete it! crazy. i dont like 3.62 but i was running HDrls10 like a champ. not a single issue. With the me7 base i want to say i didnt even flash the modules over it but i cant remember. but basically ( by what i wrote down) you were going to start from scratch anyway.. there is a better root out now anyway. use the dialer codes and get a REAL factory reset!! There are a lot of people that arent digging the 3.62..... it was causing bootloops for a while but there are def still some lingering issues i think.
Click to expand...
Click to collapse
Well...nothing has worked.
Update for everyone, I was using the older SS, 3.60.
I killed everything, put the original Verizon ME7 Rom on the phone, re-rooted, put 3.62 SS on, (Done like it), installed the HDrls10, Installed the module, (both successful), restarted, exact same thing. Right after Safestrap Enabled pops up, the phone goes dark and the battery needs to be removed and put back in for it to turn on again.
So, I tried something crazy and for whatever reason it worked as far as HD is concerned...but...I went outside of the instructions.
I have the HD rls9 Final. I installed it through SS, used the modded Kernel, (non SS), and restarted. It popped right up in about 45 seconds. (Wasnt working before I reset everything and started over)
I tried HD rls10 Final that way, and nothing.
I will be redownloading it tonight to make sure it isn't the download. (I have slow internet, itll take all night likely.) : /
If anyone is looking to actually uninstall SS (which you need to do to roll back a version) you need to use the commands hashcode has provided. Using Terminal Emulator on the stock side will accomplish that. Read up on hashcode's SS OP.
My phone will not accept HDrls 10....no matter what I try. It accepted HDrls9 without issue, minus the hotspot not working. But it will not accept HDrls10...
Im out of ideas...
EDIT: I downloaded the HDrls 10 rom from two locations, tried both, both failed this morning.
Excessumcarcer said:
My phone will not accept HDrls 10....no matter what I try. It accepted HDrls9 without issue, minus the hotspot not working. But it will not accept HDrls10...
Im out of ideas...
EDIT: I downloaded the HDrls 10 rom from two locations, tried both, both failed this morning.
Click to expand...
Click to collapse
All I can think of is somehow you are getting bad downloads. Have you checked the MD5s to match per the download sites listing?
lazer9 said:
All I can think of is somehow you are getting bad downloads. Have you checked the MD5s to match per the download sites listing?
Click to expand...
Click to collapse
I just double checked the MD5. It matches the download. How frustrating. Double checked the build, double checked the MD5, double checked install procedure, etc. It flat doesn't work on my phone, and there is no logical reason to it. I tried from a fresh build twice now, doing the rooting and SS install from stock everything.
It locks up right after SS, still.
Electronics hate me, it has been determined before. This is just further proof.
: /
So, I've done pretty much everything feasible. Guess Ill have to stick with an older HD or different rom. : (
Also, hotspot doesn't work HD 9 for me, (nor Jellybeans). I installed the module when I did the rom, but there is no hotspot for one. And two, when I download and use FoxFi, which I paid for to use on the Stock Rom before SS, it will try to turn it on and then it freezes and crashes.
All I want is a non-Verizon Rom with working Hotspot!!!! AHHHHH!!!! Looks like that aint happening.
Well played Verizon...well played. Perahps I should get an international phone and go to another company. Expensive, but tempting.
So, the final verdict for those following -
Hyperdrive 10 - Does not work on my i545 no matter what I tried.
Hyperdrive 9 - Works but the hotspot is glitched and froze no matter what I tried.
Jellybean - Works the same as HD 9
Synergy - Works. Everything on it works, hotspot, install, etc.
Not sure why the others did not work. But, for whatever reason Synergy works flawlessly for my i545. Installed and downloaded the same ways as the others, yet it worked.
: /
I was planning on trying a few others first, but Synergy claims to block Samsung from logging information from my phone. I realize this doesn't stop every company from doing it, but its the thought that counts. lol. So, Im trying this Rom out now. It's no hyperdrive, but it works.
After a BUNCH of tries I finally got it to work!!
I have a Verizon i545 with ME7. I basically started as if I'd never installed HD 9.1 in the first place.
Here's what I did.
1. Double check that your device is rooted. I used Root Checker Basic. I actually re-rooted my device just to be sure (I venture to guess it might have been unnecessary) and it worked.
2. I used a 4GB SD formatted to ex-fat and put the HD RLS10 AND the ME7 modules .zip file on it (Both on the SD)
3. I then booted into recovery.
4. Make a new ROM slot.
5. Name it whatever you like.
6. When you go to flash HD, hit the add zip button and select the ME7 modules.zip
7. When HD gets done flashing UNCHECK the "Reboot" box up top and then hit the reboot tab at the bottom right.
8. It will automatically flash the ME7 modules next. When it says 'Successful', then reboot.
9. Give it a few seconds and hopefully it will work for you as well. Good luck.
Latest installable version for Me7?
What is the latest installable version of HD for verizon locked Me7 bootloader, i currently have rls10.0 installed and ive tried 10.1, 10.2, and now 12 and none of them boot up.
Longtime XDA'er here with a problem.
I was rooted on stock 4.1.2 for over a year but wanted to update to take advantage of newer features such as chromecast mirror on kitkat. I had a perfectly working phone until I tried flashing updates. I followed instructions and only flashed the MJ9 baseband on roms that tell me too, and even flashed ND7 baseband for other ports. I was able to install multiple variants of 4.4.2 with both twrp and philz recoveries with the same result. I can't get sms/mms to come in. What's weird is upon bootup I will get the same test message only once, then nothing. I even tried flashing agni kernel with no luck. The phone works great with the exception of text messaging. Calls work, GPS locks, and no issues with wifi. APN settings look fine (compared to my wife's note 2 which is identical model still on 4.1.2). I popped my sim into an LG lucid I had as a backup and the text's sitting in limbo start streaming in, so I know my sim isn't bad. I even made sure to disable hangouts with no luck. Even tried Go Sms Pro with same result. I have since decided to go to 4.3 and am having the same issue on those roms on the MJ9 baseband and MJ9 stock kernel.
I'm pulling my hair out because I can't figure this out and I'm a pretty smart fella, this just has me stumped.
Ideas anyone? I have been researching like mad and nothing I try seems to resolve.
Thanks in advance!
timber03 said:
Longtime XDA'er here with a problem.
I was rooted on stock 4.1.2 for over a year but wanted to update to take advantage of newer features such as chromecast mirror on kitkat. I had a perfectly working phone until I tried flashing updates. I followed instructions and only flashed the MJ9 baseband on roms that tell me too, and even flashed ND7 baseband for other ports. I was able to install multiple variants of 4.4.2 with both twrp and philz recoveries with the same result. I can't get sms/mms to come in. What's weird is upon bootup I will get the same test message only once, then nothing. I even tried flashing agni kernel with no luck. The phone works great with the exception of text messaging. Calls work, GPS locks, and no issues with wifi. APN settings look fine (compared to my wife's note 2 which is identical model still on 4.1.2). I popped my sim into an LG lucid I had as a backup and the text's sitting in limbo start streaming in, so I know my sim isn't bad. I even made sure to disable hangouts with no luck. Even tried Go Sms Pro with same result. I have since decided to go to 4.3 and am having the same issue on those roms on the MJ9 baseband and MJ9 stock kernel.
I'm pulling my hair out because I can't figure this out and I'm a pretty smart fella, this just has me stumped.
Ideas anyone? I have been researching like mad and nothing I try seems to resolve.
Thanks in advance!
Click to expand...
Click to collapse
Odin back to stock should fix this issue.
DreamFX said:
Odin back to stock should fix this issue.
Click to expand...
Click to collapse
flashing stock 4.1.2 via Odin does fix it, but when I try to upgrade to any rom from there I have same problem. Pretty much all of the roms 4.3+ specify flashing with MJ9 firmware, which I have done. I have tried 4 roms today and same problem every time.
So annoying, it's like I can't get higher than 4.1.2
timber03 said:
flashing stock 4.1.2 via Odin does fix it, but when I try to upgrade to any rom from there I have same problem. Pretty much all of the roms 4.3+ specify flashing with MJ9 firmware, which I have done. I have tried 4 roms today and same problem every time.
So annoying, it's like I can't get higher than 4.1.2
Click to expand...
Click to collapse
I'm really surprised I'm the only one having this issue. After much research and countless attempts, it seems the most I can do is run stock 4.1.2 rooted, and can apply the MJ9 firmware... but if I try to update to any rom 4.3 or above, my text messaging stops working, otherwise the ROM's work great and phone calls, 4G Data, Wifi, GPS, etc all work perfect... only the sms/mms doesn't.
If I run the stock, rooted 4.1.2, with MJ9 radio everything runs great, including sms/mms, so my feeling is that I need a rom that doesn't flash kernel, or baseband, but jsut system, data, etc... then I might have a shot but it's a long shot at this point. I have even tried beans build 26 which is 4.3 and have EXACTLY the same problem.
The only other thing I've noticed is I have hardware version I605.07 whereas most people it seems have I605.06 from what I've noticed while browsing similar threads.
got it working with no help from anyone... a lot of steps but worth it. Definitely not the normal path everyone has been posting.
timber03 said:
got it working with no help from anyone... a lot of steps but worth it. Definitely not the normal path everyone has been posting.
Click to expand...
Click to collapse
Timber any chance you would be ale to point me to the fix? This has been driving me nuts
sugarfunk said:
Timber any chance you would be ale to point me to the fix? This has been driving me nuts
Click to expand...
Click to collapse
Absolutely... I will type up instructions in the morning. As for driving you nuts I know exactly what you mean... I was pulling my hair out and almost gave up hope but I tried something and it worked. It involves using beans 26 rom and a combination of Twrp and Philz recoveries and backup/restores... if you are having this problem, the main problem is the flashing of the MJ9 firmware.
I'll clue you in tomorrow
sugarfunk said:
Timber any chance you would be ale to point me to the fix? This has been driving me nuts
Click to expand...
Click to collapse
as promised, here's the steps it took for me to get working... It may seem a little bit of a long process but almost 4 days now and no more issues, so I trust this process. It must be something different in my hardware versus other, and I'm assuming yours is like mine.
Let me know if you have any questions
Start with 4.1.2 stock rooted
1. Install latest TWRP Recovery v2.7
2. Backup EFS and Modem as separate backups to your external SD card
3. In Recovery, Wipe.. Advanced Wipe and wipe everything (including Internal Storage) except external SD and USB-TG partitions
The next set of steps is to ensure you have a clean base to work with...
4. Reboot to download mode and using Odin 3.07 flash stock 4.1.2 firmware
in Pit select Sch-i605-16gb.pit
in PDA, select the stock 4.1.2 MC3 firmware
make sure only the following checkboxes are selected: "Auto Reboot", "Re-Partition" and "F. Reset Time"
Hit Start, wait till process completes and boots into o/s. Then skip all wizard options to get to home screen.
5. Root phone using casual
I had no issues using version "NoYouVerizon-GalaxyNote2-CASUAL R515.jar"
6. After root is successful, boot to Recovery and install latest TWRP recovery again since you will have twrp v2.5 due to the root process
7. Repeat step #3 (3 times to make sure everything is wiped clean)
8. IMPORTANT as this is what seemingly fixed the sms issue for me: using twrp recovery, restore the EFS backup you took in step #2 (do not restore the modem)
9. Install Beans 26 rom (Alliance 4.3) which will now give you a proper MJ9 base and kernel to work with. Again, skip all wizard prompts after it loads just so you can get to home screen.
10. Boot into recovery and now backup the new 4.3 EFS and modem partitions to your external SD.
You are not actually going to need the modem backup for the next steps, but if you have a problem installing a rom,
you now have working MJ9 EFS and Modem partitions should you have a problem with any roms from this point forward
11. Repeat step 7 & 8 (restore only the EFS 4.3 partition)
12. Important.. Now install latest Philz recovery
13. Install 4.4.2 rom using Philz recovery
At step 13 is where I installed the Ditto Note 3 rom v5.2, and chose "do not wipe" during the aroma install process.
14. once installed allow it to reboot, if it hangs on samsung boot animation for more than 5 minutes do the following:
a) pull battery and boot into philz recovery, then wipe only the following: Data, Cache, and dalvik cache
b)Install Agni Kernel (PSN_AGNi_pureSTOCK-v4.2.5_I605_4.4.2_AROMA-signed.zip)
c)reboot and you should get the android wizard for the rom in 2 or 3 minutes
If you have a problem like I did with regards to the Camera not working in the new rom, dirty flash the rom again (do not do any wiping)
Then re-install Agni Kernel since the rom installs it's own, otherwise it will break wifi, at least it did on mine.
There are a few more fixes to get tethering, etc working but I can provide those steps if needed. It basically involves installing xposed framework and the moto-x module.
timber03 said:
as promised, here's the steps it took for me to get working... It may seem a little bit of a long process but almost 4 days now and no more issues, so I trust this process. It must be something different in my hardware versus other, and I'm assuming yours is like mine.
Let me know if you have any questions
Start with 4.1.2 stock rooted
1. Install latest TWRP Recovery v2.7
2. Backup EFS and Modem as separate backups to your external SD card
3. In Recovery, Wipe.. Advanced Wipe and wipe everything (including Internal Storage) except external SD and USB-TG partitions
The next set of steps is to ensure you have a clean base to work with...
4. Reboot to download mode and using Odin 3.07 flash stock 4.1.2 firmware
in Pit select Sch-i605-16gb.pit
in PDA, select the stock 4.1.2 MC3 firmware
make sure only the following checkboxes are selected: "Auto Reboot", "Re-Partition" and "F. Reset Time"
Hit Start, wait till process completes and boots into o/s. Then skip all wizard options to get to home screen.
5. Root phone using casual
I had no issues using version "NoYouVerizon-GalaxyNote2-CASUAL R515.jar"
6. After root is successful, boot to Recovery and install latest TWRP recovery again since you will have twrp v2.5 due to the root process
7. Repeat step #3 (3 times to make sure everything is wiped clean)
8. IMPORTANT as this is what seemingly fixed the sms issue for me: using twrp recovery, restore the EFS backup you took in step #2 (do not restore the modem)
9. Install Beans 26 rom (Alliance 4.3) which will now give you a proper MJ9 base and kernel to work with. Again, skip all wizard prompts after it loads just so you can get to home screen.
10. Boot into recovery and now backup the new 4.3 EFS and modem partitions to your external SD.
You are not actually going to need the modem backup for the next steps, but if you have a problem installing a rom,
you now have working MJ9 EFS and Modem partitions should you have a problem with any roms from this point forward
11. Repeat step 7 & 8 (restore only the EFS 4.3 partition)
12. Important.. Now install latest Philz recovery
13. Install 4.4.2 rom using Philz recovery
At step 13 is where I installed the Ditto Note 3 rom v5.2, and chose "do not wipe" during the aroma install process.
14. once installed allow it to reboot, if it hangs on samsung boot animation for more than 5 minutes do the following:
a) pull battery and boot into philz recovery, then wipe only the following: Data, Cache, and dalvik cache
b)Install Agni Kernel (PSN_AGNi_pureSTOCK-v4.2.5_I605_4.4.2_AROMA-signed.zip)
c)reboot and you should get the android wizard for the rom in 2 or 3 minutes
If you have a problem like I did with regards to the Camera not working in the new rom, dirty flash the rom again (do not do any wiping)
Then re-install Agni Kernel since the rom installs it's own, otherwise it will break wifi, at least it did on mine.
There are a few more fixes to get tethering, etc working but I can provide those steps if needed. It basically involves installing xposed framework and the moto-x module.
Click to expand...
Click to collapse
Whatever works for you. Glad your back up and running.
Welcome to wilson3q's CM12 Unoffical Build!
As requested by some users, I started to build cm12 for I605. I don't own a I605, please help to test. If you like my work, you can donate here.
Disclaimer: I take no responsibility for bad things that happen as a result of flashing this.
My kernel source is standard cm12 kernel without any modifications.
SaberMod tool chain source is HERE.
All the rests are pretty standard cm12 stuffs, except a few patches I applied on top of them.
[Download]
ROM (please don't mirror):
build - 20150513
build - 20150602
Gapp:
http://forum.xda-developers.com/android/software/gapps-google-apps-minimal-edition-t2943330
Recommended launcher:
Nova Launcher (really like its JB zoom app animation, hate L slide up animation)
Recommended theme:
Deep Darkness
If you need enable soft buttons, flash this: View attachment softkeys.zip or soft+hardkeys.zip
[Flashing Guide]
1. Reboot to CWM/TWRP recovery
2. Flash ROM zip file
3. Flash Gapps
4. Reboot
* Wipe data first if you come from another rom *
* Newer boot loader, modem and recovery is highly recommended (don't use twrp 2.8.4, use 2.8.1 instead) *
* No other kernel will be supported, use the stock one, for your best experiences too *
[Patches]
My additional patches over cm12 includes:
Enhancements and bug fixes cherry-picked from other ROMs, including Slim LP, Nameless
SaberMod for ROM and kernel
O3, JustArchi optimization
Pthread enabled & strict aliasing
Latest sqlite db library
Added Boeffla sound engine 1.67
Added CPU governor zzmoove, smartassv2, savagedzen
Added io scheduler row, bfq, zen, vr
Disabled some useless Samsung processes
Fixed GPS
Fixed low in call volume
Video playback forward/backward fix
Removed all kernel debuging stuffs
Fixed keyboard not showing up during setup wizard
Fixed a crash of music app
Changed DPI to 280
Fixed Camera issue
Fixed Day Dream
Fixed Netflix streaming (one more reboot needed after installation of Netflix)
Enabled Multi-user
LMK minfree tweaks
Misc tweaks
more...
For better experience, change Nova animation/scroll speed to Fast...
[Known Bugs]
I am not sure what issues you will get, but one thing is for sure: YOUR PHONE WILL FLY!
chrome glitch: type chrome://flags as URL and disable GPU thank @bigmarv31)
Thank cm team for the amazing ROM.
Thank sabermod for the amazing toolchain.
Special thanks to: @DerTeufel1980, @sbrissen, @rogersb11, @TheBr0ken, @DreamFX, @frankie...
[Screenshots]
Always nice to see a new thread for i605. This doesn't happen often. Thank you!
Thanks again for building this for us we all appreciate it!
will be testing this out and see how it spars. thanks for this! I was going to try and "port" it over from the t0lte with replacing some libs and such, lol.
Thank you! I'm downloading right now. Looking like a slow day at work, so why not?
Downloaded files. Backed everything up. Rebooted to recovery. Wiped / Factory Reset using TWRP. Installed both zips sequentially. Apprehensive when I rebooted. Took a couple of minutes of sweating watching the CM Logo swirl around, and then bam! I'm up and running Lollipop. I'll update soon...
UPDATE
thefinancemaster said:
Downloaded files. Backed everything up. Rebooted to recovery. Wiped / Factory Reset using TWRP. Installed both zips sequentially. Apprehensive when I rebooted. Took a couple of minutes of sweating watching the CM Logo swirl around, and then bam! I'm up and running Lollipop. I'll update soon...
Click to expand...
Click to collapse
So, I've got it up and running. It's fast and smooth, but there's a couple of glaring issues stopping me from testing any farther. The first screen that comes up after you initially select your language, is a new (to me) "Activating Cellular Service" screen. It has a message on the screen saying this "can take up to 5 minutes". I let it go for longer than that, but I got an error that it was unable to activate and I was able to try again, or skip it. I'll skip it for now just to see how the rest of the ROM works. Next screen is Wifi login, works fine., but you still have to hit "skip" even after you sign in to wifi.
Then it checks connections, for updates, etc and I keep getting the error that google play services has stopped. I haven't even logged into it yet...
Next screen is Tap N Go. Option to transfer all of your stuff off your old phone using NFC. Great idea, but I'm not testing because my new phone IS my old phone.
Then, it's google login time. Worked fine, standard stuff we're used to with options to download/backup your apps using google. It takes a minute here, and I kept getting popups about all of the google apps stopping, each individually. Annoying a bit... I hit the "RESTORE" option, this is my second try, and the first time I didn't have Root, so I couldn't download Titanium to restore everything. I also skipped the google restore last time, so I tried it this time. This is a new screen for me, but it takes me to a "Restoring" screen for a bit. It's not as annoying as on previous Android versions, having to individually approve each app that was updating/downloading. I keep getting the popups about one Google app or another stopping.
I get past the restore page, and the phone locks up. Reboot... After reboot, I have to go into the play store to download Titanium. It seems quite a few apps were restored by Google, but not all. I looked at the "My Apps" section of the play store, and there's a ton of apps cued up to download. It's what I was trying to avoid... So I hit "Stop" at the top, and it stops them all.
**I mentioned earlier that this is my 2nd try, the first try was about the same, but I didn't have root access. I downloaded SuperSU, but it wouldn't update the binaries, so it was useless. I tried SuperUser, it didn't work either. So, I rebooted to recovery, wiped, flashed the ROM, GApps, and the SuperSU zip I had saved on my SD card from my previous Omni Rom. Then I rebooted and now you can read what happened.
At this point, I'm having problems downloading Titanium Backup, SuperSU, or anything I really want. The Play Store is hanging and force closing. I can't even open the SuperSU I flashed from TWRP. There must be compatibility issues. I read somewhere that Lollipop has issues with root somehow, but I'm not sure. On my first try, I was able to download Titanium Backup no problem, but it wouldn't work because I didn't have root access. SuperSU and SuperUser didn't help after downloading. CM has always been pre-rooted on all of the other devices I've installed it on.
For now, I'm just going to restore my backup of Omni Rom and be content with 4.4.4 for now.
I'll try again if anyone can help with actually being on the VZW Network and Root. I didn't get a chance to play with the other stuff in Lollipop yet, but I would love to.
thefinancemaster said:
So, I've got it up and running. It's fast and smooth, but there's a couple of glaring issues stopping me from testing any farther. The first screen that comes up after you initially select your language, is a new (to me) "Activating Cellular Service" screen. It has a message on the screen saying this "can take up to 5 minutes". I let it go for longer than that, but I got an error that it was unable to activate and I was able to try again, or skip it. I'll skip it for now just to see how the rest of the ROM works. Next screen is Wifi login, works fine., but you still have to hit "skip" even after you sign in to wifi.
Then it checks connections, for updates, etc and I keep getting the error that google play services has stopped. I haven't even logged into it yet...
Next screen is Tap N Go. Option to transfer all of your stuff off your old phone using NFC. Great idea, but I'm not testing because my new phone IS my old phone.
Then, it's google login time. Worked fine, standard stuff we're used to with options to download/backup your apps using google. It takes a minute here, and I kept getting popups about all of the google apps stopping, each individually. Annoying a bit... I hit the "RESTORE" option, this is my second try, and the first time I didn't have Root, so I couldn't download Titanium to restore everything. I also skipped the google restore last time, so I tried it this time. This is a new screen for me, but it takes me to a "Restoring" screen for a bit. It's not as annoying as on previous Android versions, having to individually approve each app that was updating/downloading. I keep getting the popups about one Google app or another stopping.
I get past the restore page, and the phone locks up. Reboot... After reboot, I have to go into the play store to download Titanium. It seems quite a few apps were restored by Google, but not all. I looked at the "My Apps" section of the play store, and there's a ton of apps cued up to download. It's what I was trying to avoid... So I hit "Stop" at the top, and it stops them all.
**I mentioned earlier that this is my 2nd try, the first try was about the same, but I didn't have root access. I downloaded SuperSU, but it wouldn't update the binaries, so it was useless. I tried SuperUser, it didn't work either. So, I rebooted to recovery, wiped, flashed the ROM, GApps, and the SuperSU zip I had saved on my SD card from my previous Omni Rom. Then I rebooted and now you can read what happened.
At this point, I'm having problems downloading Titanium Backup, SuperSU, or anything I really want. The Play Store is hanging and force closing. I can't even open the SuperSU I flashed from TWRP. There must be compatibility issues. I read somewhere that Lollipop has issues with root somehow, but I'm not sure. On my first try, I was able to download Titanium Backup no problem, but it wouldn't work because I didn't have root access. SuperSU and SuperUser didn't help after downloading. CM has always been pre-rooted on all of the other devices I've installed it on.
For now, I'm just going to restore my backup of Omni Rom and be content with 4.4.4 for now.
I'll try again if anyone can help with actually being on the VZW Network and Root. I didn't get a chance to play with the other stuff in Lollipop yet, but I would love to.
Click to expand...
Click to collapse
Did you flash the andriod 5 gapps? Do a full wipe?
You also need latest twrp recovery or philz touch recovery...
baseband unknown no data
bigmarv31 said:
baseband unknown no data
Click to expand...
Click to collapse
Will fix this today.
Keep a close look.
wilson3q said:
Will fix this today.
Keep a close look.
Click to expand...
Click to collapse
Yes Sir Thanks
New build online...
Giving this a try!! Downloading now
Update- Downloaded and installed without any problems. I did have to skip the network verification set-up as it never went anywhere and wifi set-up worked as with setting up my g-mail account,.
Everything seems good except for no service, baseband version still unknown and no service or apn's for data.
going back to Liquid till this gets updated.
LvnInOC said:
Giving this a try!! Downloading now
Update- Downloaded and installed without any problems. I did have to skip the network verification set-up as it never went anywhere and wifi set-up worked as with setting up my g-mail account,.
Everything seems good except for no service, baseband version still unknown and no service or apn's for data.
going back to Liquid till this gets updated.
Click to expand...
Click to collapse
Can you get a logcat?
I guess my proprietary blobs are not correct...
wilson3q said:
Can you get a logcat?
I guess my proprietary blobs are not correct...
Click to expand...
Click to collapse
I already went back to Liquid but I dont mind doing another try at it especially if it would benefit. let me get ir flashed and try to get you the Logcat
. give me a few
---------- Post added at 05:38 AM ---------- Previous post was at 05:10 AM ----------
ok so I got this flashed again strange this time after booting it said no sim card inserted and to insert my sim, it was not out and i skipped and moved to wifi , setup worked all the way and I got a log cat, hope I did it correct as this is new to me. I have to re-flash to Liquid for now so that I have a working phone as I go to work in an hour,
Again let me know if you need any more details
Same on this build baseband unknown so no data
wilson3q said:
Did you flash the andriod 5 gapps? Do a full wipe?
You also need latest twrp recovery or philz touch recovery...
Click to expand...
Click to collapse
Yes, I flashed the gapps from your post. gapps-lp-20141109 is what the file name was. I use TWRP, not sure if it's the latest but it works fine. I always do the "factory reset" wipe option in twrp, because I believe that's a full wipe with one swipe... Now, just to test it out and see if I was doing something wrong, I tried the Liquid Smooth build (latest nightly) from 1/7, and it loaded and booted just fine. Had to flash the ROM, Gapps, GPS Fix, and Super SU (so I can restore my apps in Titanium). It connected to data, and ran me through the setup in a flash. It's working well enough to be a daily driver. Do you have any other suggestions? I'm willing to help if you want me to try something else.
Going to give this a try. Thank you for giving this phone options. It is greatly appreciated.
"Chance Favors the Prepared"
glockman4519 said:
Going to give this a try. Thank you for giving this phone options. It is greatly appreciated.
"Chance Favors the Prepared"
Click to expand...
Click to collapse
You're like me you change roms by the hour.
DreamFX said:
You're like me you change roms by the hour.
Click to expand...
Click to collapse
I love to flash and then go through a process of testing. I actually got 2 gt-n5110s so I could test a couple builds at same time, kind of a back to back comparison.
I would love to pick up another i650 that still has unlocked bootloader for testing that way on this device as well.
Well back to this rom, I couldn't get past the getting data screen and had to abort. I did a clean flash and wiped everything with both philz and TWRP 2.8.3.0. I tried both stock and shift kernels.
Lets face it, I'm a flashaholic. lol.....
"Chances Favors the Prepared"
Edit: They do keep coming!
I looked into doing it, and there is no way in hell that I should be a) doing it, and b) unleashing it onto the world. It would be bad.
I only have the one phone to test it on and can't risk messing it up and I don't have the experience to work on it if it didn't come out perfectly.
I expect that it will be the last Sprint ROM released for this phone, We're nearing the end of support, so it would be good to have these final versions "fixed" and available
...on the off chance a few developers will jump right in and cook up a few mega ROMs for us.
DQG1 Root and Xposed (rewritten)
On a related note, I installed stock DQA1 DQG1, using the usual CF Autoroot, battery pull thingy process Odin for the ROM and TWRP, then booting once, booting into recovery, and then installing SuperSU and it rooted fine. No loss of settings or anything else as far as I can tell.
I did have to install the latest versions of the Xposed files. After rooting and custom recovery (TWRP works fine), install XposedInstaller_3.1.4.apk first like any other apk, then go to recovery and install Wanam v87.1-alt-sdk23-arm-custom-build, but everything (Xprivacy, etc.) worked fine. Keep in mind, you HAVE to use the "alt" (see the "alt" in the file name above?) version or else it won't work. Samsung made some changes, blah, blah, blah. Much thanks to Wanam!
New side note: I did do a factory wipe, and even after reinstalling everything, and using a ROM that contains bloatware, I still have like 40% more space on the phone. I truly don't know what happened there.
Anyone have any thoughts as to kernel? I downloaded Emotion r26 RC1, and BeastModeKernel 1.0BETA, but I haven't tried them yet.
EDIT: Emotion r26 RC1 works fine, but it doesn't seem like CPU freqs are ever going to stick.
No surprise that neither Emotion nor BeastModeKernel worked; I haven't seen anything else that may.
Thoughts anyone?
Both kernels are good, emotion has a few more options to tweak but I took an update a month or two ago and run NotEdge ROM fine , I just use SO launcher with it because I like TW, also latest xposed is 86.1 and I wish I could do what your asking but it probably would be just as bad you'll be fine with that ROM I just suggested it has everything u just requested just make a nandroid and do it at home in case you do something wrong you can always ODIN back your firmware
Sent from my HTC One M9 using XDA-Developers mobile app
D'oh!!
Eating a little crow here. So far, there have been two three 742 updates, maybe there will be more. Who knows?
But I edited the title of the first post. Again. Again. 741 times.
Do you guys have a link to the stock unrooted rom? My phone is royally screwed right now and still stock. I want to do a clean flash and see if that fixes it.
Over a year later, and the still keep coming.
Hmmmm.
I did take another gander around, but it seems that I would need Linux to do it correctly, so I am still opting out of doing it myself.
mictek said:
Do you guys have a link to the stock unrooted rom? My phone is royally screwed right now and still stock. I want to do a clean flash and see if that fixes it.
Click to expand...
Click to collapse
They all arrive here: https://www.sammobile.com/firmwares/galaxy-note-edge/SM-N915P/ eventually.
Hello i got a note 4 Sprint MM 6.0.1 N910PVPU5DQI5 . i am from Argentina, and i bought the phone used from a guy from USA. (i don`t know how but it`s working with the bands here but i dont know if 4g is working, the guy says it works, maybe i don`t have 4g singal in my zone) .
the phone works fine, but has some srpint stuff and ads that bother me. so i flashed TWRP , and now i am looking for any roms and kernels to flash.
for example, is safe to flash this: https://forum.xda-developers.com/note-4-sprint/development/rom-updated-1-14-2017-t3538051
or should i change something first ???.